97 lines
2.5 KiB
C
97 lines
2.5 KiB
C
|
/* A basic example that demonstrates how UART can be configured.
|
||
|
|
Outputs some test data with 100baud, 1.5 stopbits, even parity bit to UART1
|
||
|
|
(GPIO2; D4 for NodeMCU boards)
|
||
|
|
|
||
|
|
This sample code is in the public domain.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <espressif/esp_common.h>
|
||
|
|
#include <FreeRTOS.h>
|
||
|
|
#include <task.h>
|
||
|
|
#include <queue.h>
|
||
|
|
|
||
|
|
#include <esp/uart.h>
|
||
|
|
#include <esp/uart_regs.h>
|
||
|
|
|
||
|
|
void uart_send_data(void *pvParameters){
|
||
|
|
/* Activate UART for GPIO2 */
|
||
|
|
gpio_set_iomux_function(2, IOMUX_GPIO2_FUNC_UART1_TXD);
|
||
|
|
|
||
|
|
/* Set baud rate of UART1 to 100 (so it's easier to measure) */
|
||
|
|
uart_set_baud(1, 100);
|
||
|
|
|
||
|
|
/* Set to 1.5 stopbits */
|
||
|
|
uart_set_stopbits(1, UART_STOPBITS_1_5);
|
||
|
|
|
||
|
|
/* Enable parity bit */
|
||
|
|
uart_set_parity_enabled(1, true);
|
||
|
|
|
||
|
|
/* Set parity bit to even */
|
||
|
|
uart_set_parity(1, UART_PARITY_EVEN);
|
||
|
|
|
||
|
|
/* Repeatedly send some example packets */
|
||
|
|
for(;;)
|
||
|
|
{
|
||
|
|
uart_putc(1, 0B00000000);
|
||
|
|
uart_putc(1, 0B00000001);
|
||
|
|
uart_putc(1, 0B10101010);
|
||
|
|
uart_flush_txfifo(1);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void uart_print_config(void *pvParameters){
|
||
|
|
for(;;)
|
||
|
|
{
|
||
|
|
/* Get data */
|
||
|
|
int baud = uart_get_baud(1);
|
||
|
|
UART_StopBits stopbits = uart_get_stopbits(1);
|
||
|
|
bool parity_enabled = uart_get_parity_enabled(1);
|
||
|
|
UART_Parity parity = uart_get_parity(1);
|
||
|
|
|
||
|
|
/* Print to UART0 */
|
||
|
|
printf("Baud: %d ", baud);
|
||
|
|
|
||
|
|
switch(stopbits){
|
||
|
|
case UART_STOPBITS_0:
|
||
|
|
printf("Stopbits: 0 ");
|
||
|
|
break;
|
||
|
|
case UART_STOPBITS_1:
|
||
|
|
printf("Stopbits: 1 ");
|
||
|
|
break;
|
||
|
|
case UART_STOPBITS_1_5:
|
||
|
|
printf("Stopbits: 1.5 ");
|
||
|
|
break;
|
||
|
|
case UART_STOPBITS_2:
|
||
|
|
printf("Stopbits: 2");
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
printf("Stopbits: Error");
|
||
|
|
}
|
||
|
|
|
||
|
|
printf("Parity bit enabled: %d ", parity_enabled);
|
||
|
|
|
||
|
|
switch(parity){
|
||
|
|
case UART_PARITY_EVEN:
|
||
|
|
printf("Parity: Even");
|
||
|
|
break;
|
||
|
|
case UART_PARITY_ODD:
|
||
|
|
printf("Parity: Odd");
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
printf("Parity: Error");
|
||
|
|
}
|
||
|
|
|
||
|
|
printf("\n");
|
||
|
|
|
||
|
|
vTaskDelay(1000.0 / portTICK_PERIOD_MS);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void user_init(void){
|
||
|
|
uart_set_baud(0, 115200);
|
||
|
|
printf("SDK version:%s\n", sdk_system_get_sdk_version());
|
||
|
|
|
||
|
|
xTaskCreate(uart_send_data, "tsk1", 256, NULL, 2, NULL);
|
||
|
|
xTaskCreate(uart_print_config, "tsk2", 256, NULL, 3, NULL);
|
||
|
|
}
|