433 lines
16 KiB
C
433 lines
16 KiB
C
|
/**
|
||
|
|
* Simple example with one sensor connected to I2C or SPI. It demonstrates the
|
||
|
|
* different approaches to fetch the data. Either one of the interrupt signals
|
||
|
|
* is used or new data are fetched periodically.
|
||
|
|
*
|
||
|
|
* Harware configuration:
|
||
|
|
*
|
||
|
|
* I2C
|
||
|
|
*
|
||
|
|
* +-----------------+ +----------+
|
||
|
|
* | ESP8266 / ESP32 | | LSM303D |
|
||
|
|
* | | | |
|
||
|
|
* | GPIO 14 (SCL) ----> SCL |
|
||
|
|
* | GPIO 13 (SDA) <---> SDA |
|
||
|
|
* | GPIO 5 <---- INT1 |
|
||
|
|
* | GPIO 4 <---- INT2 |
|
||
|
|
* +-----------------+ +----------+
|
||
|
|
*
|
||
|
|
* SPI
|
||
|
|
*
|
||
|
|
* +-----------------+ +----------+ +-----------------+ +----------+
|
||
|
|
* | ESP8266 | | LSM303D | | ESP32 | | LSM303D |
|
||
|
|
* | | | | | | | |
|
||
|
|
* | GPIO 14 (SCK) ----> SCK | | GPIO 16 (SCK) ----> SCK |
|
||
|
|
* | GPIO 13 (MOSI)----> SDI | | GPIO 17 (MOSI)----> SDI |
|
||
|
|
* | GPIO 12 (MISO)<---- SDO | | GPIO 18 (MISO)<---- SDO |
|
||
|
|
* | GPIO 2 (CS) ----> CS | | GPIO 19 (CS) ----> CS |
|
||
|
|
* | GPIO 5 <---- INT1 | | GPIO 5 <---- INT1 |
|
||
|
|
* | GPIO 4 <---- INT2 | | GPIO 4 <---- INT2 |
|
||
|
|
* +-----------------+ +---------+ +-----------------+ +----------+
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* -- use following constants to define the example mode ----------- */
|
||
|
|
|
||
|
|
// #define SPI_USED // SPI interface is used, otherwise I2C
|
||
|
|
// #define FIFO_MODE // multiple sample read mode
|
||
|
|
// #define TEMP_USED // temperature sensor used
|
||
|
|
// #define INT_DATA // data interrupts used (data ready and FIFO status)
|
||
|
|
// #define INT_EVENT // inertial event interrupts used (axis movement or 6D/4D orientation)
|
||
|
|
// #define INT_CLICK // click detection interrupts used
|
||
|
|
// #define INT_THRESH // magnetic value exceeds threshold interrupt used
|
||
|
|
|
||
|
|
#if defined(INT_DATA) || defined(INT_EVENT) || defined(INT_CLICK) || defined(INT_THRESH)
|
||
|
|
#define INT_USED
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* -- includes ----------------------------------------------------- */
|
||
|
|
|
||
|
|
#include "lsm303d.h"
|
||
|
|
|
||
|
|
/** -- platform dependent definitions ------------------------------ */
|
||
|
|
|
||
|
|
#ifdef ESP_PLATFORM // ESP32 (ESP-IDF)
|
||
|
|
|
||
|
|
// user task stack depth for ESP32
|
||
|
|
#define TASK_STACK_DEPTH 2048
|
||
|
|
|
||
|
|
// SPI interface definitions for ESP32
|
||
|
|
#define SPI_BUS HSPI_HOST
|
||
|
|
#define SPI_SCK_GPIO 16
|
||
|
|
#define SPI_MOSI_GPIO 17
|
||
|
|
#define SPI_MISO_GPIO 18
|
||
|
|
#define SPI_CS_GPIO 19
|
||
|
|
|
||
|
|
#else // ESP8266 (esp-open-rtos)
|
||
|
|
|
||
|
|
// user task stack depth for ESP8266
|
||
|
|
#define TASK_STACK_DEPTH 256
|
||
|
|
|
||
|
|
// SPI interface definitions for ESP8266
|
||
|
|
#define SPI_BUS 1
|
||
|
|
#define SPI_SCK_GPIO 14
|
||
|
|
#define SPI_MOSI_GPIO 13
|
||
|
|
#define SPI_MISO_GPIO 12
|
||
|
|
#define SPI_CS_GPIO 2 // GPIO 15, the default CS of SPI bus 1, can't be used
|
||
|
|
|
||
|
|
#endif // ESP_PLATFORM
|
||
|
|
|
||
|
|
// I2C interface defintions for ESP32 and ESP8266
|
||
|
|
#define I2C_BUS 0
|
||
|
|
#define I2C_SCL_PIN 14
|
||
|
|
#define I2C_SDA_PIN 13
|
||
|
|
#define I2C_FREQ I2C_FREQ_100K
|
||
|
|
|
||
|
|
// interrupt GPIOs defintions for ESP8266 and ESP32
|
||
|
|
#define INT1_PIN 5
|
||
|
|
#define INT2_PIN 4
|
||
|
|
|
||
|
|
/* -- user tasks --------------------------------------------------- */
|
||
|
|
|
||
|
|
static lsm303d_sensor_t* sensor;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Common function used to get sensor data.
|
||
|
|
*/
|
||
|
|
void read_data ()
|
||
|
|
{
|
||
|
|
#ifdef FIFO_MODE
|
||
|
|
|
||
|
|
lsm303d_float_a_data_fifo_t fifo;
|
||
|
|
|
||
|
|
// test for new accelerator data data
|
||
|
|
if (lsm303d_new_a_data (sensor))
|
||
|
|
{
|
||
|
|
// fetch the accelerator data stored in FIFO
|
||
|
|
uint8_t num = lsm303d_get_float_a_data_fifo (sensor, fifo);
|
||
|
|
|
||
|
|
printf("%.3f LSM303D num=%d\n", (double)sdk_system_get_time()*1e-3, num);
|
||
|
|
|
||
|
|
for (int i=0; i < num; i++)
|
||
|
|
// max. full scale is +-16 g and best resolution is 1 mg, i.e. 5 digits
|
||
|
|
printf("%.3f LSM303D (xyz)[g] ax=%+7.3f ay=%+7.3f az=%+7.3f\n",
|
||
|
|
(double)sdk_system_get_time()*1e-3,
|
||
|
|
fifo[i].ax, fifo[i].ay, fifo[i].az);
|
||
|
|
}
|
||
|
|
|
||
|
|
#else
|
||
|
|
|
||
|
|
lsm303d_float_a_data_t a_data;
|
||
|
|
|
||
|
|
// test for new accelerator data and fetch them
|
||
|
|
if (lsm303d_new_a_data (sensor) &&
|
||
|
|
lsm303d_get_float_a_data (sensor, &a_data))
|
||
|
|
// max. full scale is +-16 g and best resolution is 1 mg, i.e. 5 digits
|
||
|
|
printf("%.3f LSM303D (xyz)[g] ax=%+7.3f ay=%+7.3f az=%+7.3f\n",
|
||
|
|
(double)sdk_system_get_time()*1e-3,
|
||
|
|
a_data.ax, a_data.ay, a_data.az);
|
||
|
|
|
||
|
|
#endif // FIFO_MODE
|
||
|
|
|
||
|
|
lsm303d_float_m_data_t m_data;
|
||
|
|
|
||
|
|
// test for new magnetometer data and fetch them
|
||
|
|
if (lsm303d_new_m_data (sensor) &&
|
||
|
|
lsm303d_get_float_m_data (sensor, &m_data))
|
||
|
|
// max. full scale is +-12 Gs and best resolution is 1 mGs, i.e. 5 digits
|
||
|
|
printf("%.3f LSM303D (xyz)[Gs] mx=%+7.3f my=%+7.3f mz=%+7.3f\n",
|
||
|
|
(double)sdk_system_get_time()*1e-3,
|
||
|
|
m_data.mx, m_data.my, m_data.mz);
|
||
|
|
|
||
|
|
#ifdef TEMP_USED
|
||
|
|
float temp = lsm303d_get_temperature (sensor);
|
||
|
|
|
||
|
|
printf("%.3f LSM303D (tmp)[°C] %+7.3f\n", (double)sdk_system_get_time()*1e-3, temp);
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef INT_USED
|
||
|
|
/**
|
||
|
|
* In this case, any of the possible interrupts on interrupt signal *INT1* is
|
||
|
|
* used to fetch the data.
|
||
|
|
*
|
||
|
|
* When interrupts are used, the user has to define interrupt handlers that
|
||
|
|
* either fetches the data directly or triggers a task which is waiting to
|
||
|
|
* fetch the data. In this example, the interrupt handler sends an event to
|
||
|
|
* a waiting task to trigger the data gathering.
|
||
|
|
*/
|
||
|
|
|
||
|
|
static QueueHandle_t gpio_evt_queue = NULL;
|
||
|
|
|
||
|
|
// User task that fetches the sensor values.
|
||
|
|
|
||
|
|
void user_task_interrupt (void *pvParameters)
|
||
|
|
{
|
||
|
|
uint8_t gpio;
|
||
|
|
|
||
|
|
while (1)
|
||
|
|
{
|
||
|
|
if (xQueueReceive(gpio_evt_queue, &gpio, portMAX_DELAY))
|
||
|
|
{
|
||
|
|
lsm303d_int_data_source_t data_src = {};
|
||
|
|
lsm303d_int_event_source_t event_src = {};
|
||
|
|
lsm303d_int_click_source_t click_src = {};
|
||
|
|
lsm303d_int_m_thresh_source_t thresh_src = {};
|
||
|
|
|
||
|
|
// get the source of the interrupt that reset *INTx* signals
|
||
|
|
#ifdef INT_DATA
|
||
|
|
lsm303d_get_int_data_source (sensor, &data_src);
|
||
|
|
#endif
|
||
|
|
#ifdef INT_THRESH
|
||
|
|
lsm303d_get_int_m_thresh_source(sensor, &thresh_src);
|
||
|
|
#endif
|
||
|
|
#ifdef INT_EVENT
|
||
|
|
lsm303d_get_int_event_source (sensor, &event_src, lsm303d_int_event1_gen);
|
||
|
|
#endif
|
||
|
|
#ifdef INT_CLICK
|
||
|
|
lsm303d_get_int_click_source (sensor, &click_src);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
// in case of DRDY interrupt
|
||
|
|
if (data_src.a_data_ready || data_src.m_data_ready)
|
||
|
|
read_data ();
|
||
|
|
|
||
|
|
// in case of FIFO interrupts read the whole FIFO
|
||
|
|
else if (data_src.fifo_thresh || data_src.fifo_overrun)
|
||
|
|
read_data ();
|
||
|
|
|
||
|
|
// in case of magnetic threshold interrupt
|
||
|
|
else if (thresh_src.active)
|
||
|
|
{
|
||
|
|
printf("%.3f LSM303D ", (double)sdk_system_get_time()*1e-3);
|
||
|
|
if (thresh_src.x_pos) printf("x exceeds threshold on positive side\n");
|
||
|
|
if (thresh_src.y_pos) printf("y exceeds threshold on positive side\n");
|
||
|
|
if (thresh_src.z_pos) printf("z exceeds threshold on positive side\n");
|
||
|
|
if (thresh_src.x_neg) printf("x exceeds threshold on negative side\n");
|
||
|
|
if (thresh_src.y_neg) printf("y exceeds threshold on negative side\n");
|
||
|
|
if (thresh_src.z_neg) printf("z exceeds threshold on negative side\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
// in case of event interrupt
|
||
|
|
else if (event_src.active)
|
||
|
|
{
|
||
|
|
printf("%.3f LSM303D ", (double)sdk_system_get_time()*1e-3);
|
||
|
|
if (event_src.x_low) printf("x is lower than threshold\n");
|
||
|
|
if (event_src.y_low) printf("y is lower than threshold\n");
|
||
|
|
if (event_src.z_low) printf("z is lower than threshold\n");
|
||
|
|
if (event_src.x_high) printf("x is higher than threshold\n");
|
||
|
|
if (event_src.y_high) printf("y is higher than threshold\n");
|
||
|
|
if (event_src.z_high) printf("z is higher than threshold\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
// in case of click detection interrupt
|
||
|
|
else if (click_src.active)
|
||
|
|
printf("%.3f LSM303D %s\n", (double)sdk_system_get_time()*1e-3,
|
||
|
|
click_src.s_click ? "single click" : "double click");
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
// Interrupt handler which resumes user_task_interrupt on interrupt
|
||
|
|
|
||
|
|
void IRAM int_signal_handler (uint8_t gpio)
|
||
|
|
{
|
||
|
|
// send an event with GPIO to the interrupt user task
|
||
|
|
xQueueSendFromISR(gpio_evt_queue, &gpio, NULL);
|
||
|
|
}
|
||
|
|
|
||
|
|
#else // !INT_USED
|
||
|
|
|
||
|
|
/*
|
||
|
|
* In this example, user task fetches the sensor values every seconds.
|
||
|
|
*/
|
||
|
|
|
||
|
|
void user_task_periodic(void *pvParameters)
|
||
|
|
{
|
||
|
|
vTaskDelay (100/portTICK_PERIOD_MS);
|
||
|
|
|
||
|
|
while (1)
|
||
|
|
{
|
||
|
|
// read sensor data
|
||
|
|
read_data ();
|
||
|
|
|
||
|
|
// passive waiting until 1 second is over
|
||
|
|
vTaskDelay(200/portTICK_PERIOD_MS);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
#endif // INT_USED
|
||
|
|
|
||
|
|
/* -- main program ------------------------------------------------- */
|
||
|
|
|
||
|
|
void user_init(void)
|
||
|
|
{
|
||
|
|
// Set UART Parameter.
|
||
|
|
uart_set_baud(0, 115200);
|
||
|
|
// Give the UART some time to settle
|
||
|
|
vTaskDelay(1);
|
||
|
|
|
||
|
|
/** -- MANDATORY PART -- */
|
||
|
|
|
||
|
|
#ifdef SPI_USED
|
||
|
|
|
||
|
|
// init the SPI interface at which LMS303D sensors are connected
|
||
|
|
spi_bus_init (SPI_BUS, SPI_SCK_GPIO, SPI_MISO_GPIO, SPI_MOSI_GPIO);
|
||
|
|
|
||
|
|
// init the sensor connected to SPI_BUS with SPI_CS_GPIO as chip select.
|
||
|
|
sensor = lsm303d_init_sensor (SPI_BUS, 0, SPI_CS_GPIO);
|
||
|
|
|
||
|
|
#else
|
||
|
|
|
||
|
|
// init all I2C busses at which LSM303D sensors are connected
|
||
|
|
i2c_init (I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ);
|
||
|
|
|
||
|
|
// init the sensor with slave address LSM303D_I2C_ADDRESS_2 connected to I2C_BUS.
|
||
|
|
sensor = lsm303d_init_sensor (I2C_BUS, LSM303D_I2C_ADDRESS_2, 0);
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
if (sensor)
|
||
|
|
{
|
||
|
|
#ifdef INT_USED
|
||
|
|
|
||
|
|
/** --- INTERRUPT CONFIGURATION PART ---- */
|
||
|
|
|
||
|
|
// Interrupt configuration has to be done before the sensor is set
|
||
|
|
// into measurement mode to avoid losing interrupts
|
||
|
|
|
||
|
|
// create an event queue to send interrupt events from interrupt
|
||
|
|
// handler to the interrupt task
|
||
|
|
gpio_evt_queue = xQueueCreate(10, sizeof(uint8_t));
|
||
|
|
|
||
|
|
// configure interupt pins for *INT1* and *INT2* signals and set the interrupt handler
|
||
|
|
gpio_enable(INT1_PIN, GPIO_INPUT);
|
||
|
|
gpio_enable(INT2_PIN, GPIO_INPUT);
|
||
|
|
gpio_set_interrupt(INT1_PIN, GPIO_INTTYPE_EDGE_POS, int_signal_handler);
|
||
|
|
gpio_set_interrupt(INT2_PIN, GPIO_INTTYPE_EDGE_POS, int_signal_handler);
|
||
|
|
|
||
|
|
#endif // INT_USED
|
||
|
|
|
||
|
|
/** -- SENSOR CONFIGURATION PART --- */
|
||
|
|
|
||
|
|
// set the type of INTx signals if necessary
|
||
|
|
// lsm303d_config_int_signals (sensor, lsm303d_push_pull);
|
||
|
|
|
||
|
|
#ifdef INT_DATA
|
||
|
|
// enable data interrupts on *INT2* (data ready or FIFO overrun and FIFO threshold)
|
||
|
|
// data ready and FIFO status interrupts must not be enabled at the same time
|
||
|
|
#ifdef FIFO_MODE
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_fifo_overrun, lsm303d_int2_signal, true);
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_fifo_thresh , lsm303d_int2_signal, true);
|
||
|
|
#else
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_a_data_ready, lsm303d_int2_signal, true);
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_m_data_ready, lsm303d_int2_signal, true);
|
||
|
|
#endif // FIFO_MODE
|
||
|
|
#endif // INT_DATA
|
||
|
|
|
||
|
|
#ifdef INT_THRESH
|
||
|
|
// enable magnetic threshold interrupts on signal *INT1*
|
||
|
|
lsm303d_int_m_thresh_config_t m_thresh_config;
|
||
|
|
|
||
|
|
m_thresh_config.threshold = 2000;
|
||
|
|
m_thresh_config.x_enabled = true;
|
||
|
|
m_thresh_config.y_enabled = true;
|
||
|
|
m_thresh_config.z_enabled = true;
|
||
|
|
m_thresh_config.latch = true;
|
||
|
|
m_thresh_config.signal_level = lsm303d_high_active;
|
||
|
|
|
||
|
|
lsm303d_set_int_m_thresh_config (sensor, &m_thresh_config);
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_m_thresh, lsm303d_int1_signal, true);
|
||
|
|
#endif // INT_THRESH
|
||
|
|
|
||
|
|
#ifdef INT_EVENT
|
||
|
|
// enable inertial event interrupts on *INT1*
|
||
|
|
lsm303d_int_event_config_t event_config;
|
||
|
|
|
||
|
|
event_config.mode = lsm303d_or; // axes movement wake-up
|
||
|
|
// event_config.mode = lsm303d_and; // free fall
|
||
|
|
// event_config.mode = lsm303d_6d_movement;
|
||
|
|
// event_config.mode = lsm303d_6d_position;
|
||
|
|
// event_config.mode = lsm303d_4d_movement;
|
||
|
|
// event_config.mode = lsm303d_4d_position;
|
||
|
|
event_config.threshold = 50;
|
||
|
|
event_config.x_low_enabled = false;
|
||
|
|
event_config.x_high_enabled = true;
|
||
|
|
event_config.y_low_enabled = false;
|
||
|
|
event_config.y_high_enabled = true;
|
||
|
|
event_config.z_low_enabled = false;
|
||
|
|
event_config.z_high_enabled = true;
|
||
|
|
event_config.duration = 0;
|
||
|
|
event_config.latch = true;
|
||
|
|
|
||
|
|
lsm303d_set_int_event_config (sensor, &event_config, lsm303d_int_event1_gen);
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_event1, lsm303d_int1_signal, true);
|
||
|
|
#endif // INT_EVENT
|
||
|
|
|
||
|
|
#ifdef INT_CLICK
|
||
|
|
// enable single click interrupt for z-axis on signal *INT1*
|
||
|
|
lsm303d_int_click_config_t click_config;
|
||
|
|
|
||
|
|
click_config.threshold = 10;
|
||
|
|
click_config.x_single = false;
|
||
|
|
click_config.x_double = false;
|
||
|
|
click_config.y_single = false;
|
||
|
|
click_config.y_double = false;
|
||
|
|
click_config.z_single = true;
|
||
|
|
click_config.z_double = false;
|
||
|
|
click_config.latch = true;
|
||
|
|
click_config.time_limit = 1;
|
||
|
|
click_config.time_latency = 1;
|
||
|
|
click_config.time_window = 3;
|
||
|
|
|
||
|
|
lsm303d_set_int_click_config (sensor, &click_config);
|
||
|
|
lsm303d_enable_int (sensor, lsm303d_int_click, lsm303d_int1_signal, true);
|
||
|
|
#endif // INT_CLICK
|
||
|
|
|
||
|
|
#ifdef FIFO_MODE
|
||
|
|
// clear the FIFO
|
||
|
|
lsm303d_set_fifo_mode (sensor, lsm303d_bypass, 0);
|
||
|
|
|
||
|
|
// activate the FIFO with a threshold of 10 samples (max. 31); if
|
||
|
|
// interrupt *lsm303d_fifo_thresh* is enabled, an interrupt is
|
||
|
|
// generated when the FIFO content exceeds this threshold, i.e.,
|
||
|
|
// when 11 samples are stored in FIFO
|
||
|
|
lsm303d_set_fifo_mode (sensor, lsm303d_stream, 10);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
// configure HPF and implicitly reset the reference by a dummy read
|
||
|
|
lsm303d_config_a_hpf (sensor, lsm303d_hpf_normal, true, true, true, true);
|
||
|
|
|
||
|
|
#ifdef TEMP_USED
|
||
|
|
// enable the temperature sensor
|
||
|
|
lsm303d_enable_temperature (sensor, true);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
// LAST STEP: Finally set scale and mode to start measurements
|
||
|
|
lsm303d_set_a_scale(sensor, lsm303d_a_scale_2_g);
|
||
|
|
lsm303d_set_m_scale(sensor, lsm303d_m_scale_4_Gs);
|
||
|
|
lsm303d_set_a_mode (sensor, lsm303d_a_odr_12_5, lsm303d_a_aaf_bw_773, true, true, true);
|
||
|
|
lsm303d_set_m_mode (sensor, lsm303d_m_odr_12_5, lsm303d_m_low_res, lsm303d_m_continuous);
|
||
|
|
|
||
|
|
/** -- TASK CREATION PART --- */
|
||
|
|
|
||
|
|
// must be done last to avoid concurrency situations with the sensor
|
||
|
|
// configuration part
|
||
|
|
|
||
|
|
#ifdef INT_USED
|
||
|
|
|
||
|
|
// create a task that is triggered only in case of interrupts to fetch the data
|
||
|
|
xTaskCreate(user_task_interrupt, "user_task_interrupt", TASK_STACK_DEPTH, NULL, 2, NULL);
|
||
|
|
|
||
|
|
#else // INT_USED
|
||
|
|
|
||
|
|
// create a user task that fetches data from sensor periodically
|
||
|
|
xTaskCreate(user_task_periodic, "user_task_periodic", TASK_STACK_DEPTH, NULL, 2, NULL);
|
||
|
|
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
else
|
||
|
|
printf("Could not initialize LSM303D sensor\n");
|
||
|
|
}
|
||
|
|
|