Some small performance improvements on 32-bit architectures.

src/ec/ec_c25519_m31.c

@@ -372,8 +372,7 @@ reduce_final_f255(uint32_t *d)
 static void
 f255_mul(uint32_t *d, const uint32_t *a, const uint32_t *b)
 {
-	uint32_t t[18];
-	uint64_t cc, w;
+	uint32_t t[18], cc;
 	int i;
 
 	/*
@@ -389,21 +388,42 @@ f255_mul(uint32_t *d, const uint32_t *a, const uint32_t *b)
 	 * offset 9*30 = 270, word 9+k must be added to word k with
 	 * a factor of 19*2^15 = 622592. The extra bits in word 8 are also
 	 * added that way.
+	 *
+	 * Keeping the carry on 32 bits helps with 32-bit architectures,
+	 * and does not noticeably impact performance on 64-bit systems.
 	 */
-	cc = MUL31(t[8] >> 15, 19);
+	cc = MUL15(t[8] >> 15, 19);  /* at most 19*(2^15-1) = 622573 */
 	t[8] &= 0x7FFF;
 	for (i = 0; i < 9; i ++) {
-		w = (uint64_t)t[i] + cc + MUL31(t[i + 9], 622592);
+		uint64_t w;
+
+		w = (uint64_t)t[i] + (uint64_t)cc + MUL31(t[i + 9], 622592);
 		t[i] = (uint32_t)w & 0x3FFFFFFF;
-		cc = w >> 30;
+		cc = (uint32_t)(w >> 30);  /* at most 622592 */
 	}
-	cc = MUL31(w >> 15, 19);
+
+	/*
+	 * Original product was up to (2^256-1)^2, i.e. a 512-bit integer.
+	 * This was split into two parts (upper of 257 bits, lower of 255
+	 * bits), and the upper was added to the lower with a factor 19,
+	 * which means that the intermediate value is less than 77*2^255
+	 * (19*2^257 + 2^255). Therefore, the extra bits "t[8] >> 15" are
+	 * less than 77, and the initial carry cc is at most 76*19 = 1444.
+	 */
+	cc = MUL15(t[8] >> 15, 19);
 	t[8] &= 0x7FFF;
 	for (i = 0; i < 9; i ++) {
-		w = t[i] + cc;
-		d[i] = (uint32_t)w & 0x3FFFFFFF;
-		cc = w >> 30;
+		uint32_t z;
+
+		z = t[i] + cc;
+		d[i] = z & 0x3FFFFFFF;
+		cc = z >> 30;
 	}
+
+	/*
+	 * Final result is at most 2^255 + 1443. In particular, the last
+	 * carry is necessarily 0, since t[8] was truncated to 15 bits.
+	 */
 }
 
 /*
@@ -415,8 +435,7 @@ f255_mul(uint32_t *d, const uint32_t *a, const uint32_t *b)
 static void
 f255_square(uint32_t *d, const uint32_t *a)
 {
-	uint32_t t[18];
-	uint64_t cc, w;
+	uint32_t t[18], cc;
 	int i;
 
 	/*
@@ -428,24 +447,25 @@ f255_square(uint32_t *d, const uint32_t *a)
 
 	/*
 	 * Modular reduction: each high word is added where necessary.
-	 * Since the modulus is 2^255-19 and word 9 corresponds to
-	 * offset 9*30 = 270, word 9+k must be added to word k with
-	 * a factor of 19*2^15 = 622592. The extra bits in word 8 are also
-	 * added that way.
+	 * See f255_mul() for details on the reduction and carry limits.
 	 */
-	cc = MUL31(t[8] >> 15, 19);
+	cc = MUL15(t[8] >> 15, 19);
 	t[8] &= 0x7FFF;
 	for (i = 0; i < 9; i ++) {
-		w = (uint64_t)t[i] + cc + MUL31(t[i + 9], 622592);
+		uint64_t w;
+
+		w = (uint64_t)t[i] + (uint64_t)cc + MUL31(t[i + 9], 622592);
 		t[i] = (uint32_t)w & 0x3FFFFFFF;
-		cc = w >> 30;
+		cc = (uint32_t)(w >> 30);
 	}
-	cc = MUL31(w >> 15, 19);
+	cc = MUL15(t[8] >> 15, 19);
 	t[8] &= 0x7FFF;
 	for (i = 0; i < 9; i ++) {
-		w = t[i] + cc;
-		d[i] = (uint32_t)w & 0x3FFFFFFF;
-		cc = w >> 30;
+		uint32_t z;
+
+		z = t[i] + cc;
+		d[i] = z & 0x3FFFFFFF;
+		cc = z >> 30;
 	}
 }
 
@@ -515,20 +535,31 @@ static void
 f255_mul_a24(uint32_t *d, const uint32_t *a)
 {
 	int i;
-	uint64_t cc, w;
+	uint64_t w;
+	uint32_t cc;
 
+	/*
+	 * a[] is over 256 bits, thus a[8] has length at most 16 bits.
+	 * We single out the processing of the last word: intermediate
+	 * value w is up to 121665*2^16, yielding a carry for the next
+	 * loop of at most 19*(121665*2^16/2^15) = 4623289.
+	 */
 	cc = 0;
-	for (i = 0; i < 9; i ++) {
-		w = MUL31(a[i], 121665) + cc;
+	for (i = 0; i < 8; i ++) {
+		w = MUL31(a[i], 121665) + (uint64_t)cc;
 		d[i] = (uint32_t)w & 0x3FFFFFFF;
-		cc = w >> 30;
+		cc = (uint32_t)(w >> 30);
 	}
-	cc = MUL31((uint32_t)(w >> 15), 19);
-	d[8] &= 0x7FFF;
+	w = MUL31(a[8], 121665) + (uint64_t)cc;
+	d[8] = (uint32_t)w & 0x7FFF;
+	cc = MUL15((uint32_t)(w >> 15), 19);
+
 	for (i = 0; i < 9; i ++) {
-		w = (uint64_t)d[i] + cc;
-		d[i] = w & 0x3FFFFFFF;
-		cc = w >> 30;
+		uint32_t z;
+
+		z = d[i] + cc;
+		d[i] = z & 0x3FFFFFFF;
+		cc = z >> 30;
 	}
 }
 

src/ec/ec_p256_m15.c

@@ -1739,7 +1739,7 @@ p256_decode(p256_jacobian *P, const void *src, size_t len)
 	memcpy(P->y, ty, sizeof ty);
 	memset(P->z, 0, sizeof P->z);
 	P->z[0] = 1;
-	return NEQ(bad, 0) ^ 1;
+	return EQ(bad, 0);
 }
 
 /*

src/ec/ec_p256_m31.c

@@ -1089,7 +1089,7 @@ p256_decode(p256_jacobian *P, const void *src, size_t len)
 	memcpy(P->y, ty, sizeof ty);
 	memset(P->z, 0, sizeof P->z);
 	P->z[0] = 1;
-	return NEQ(bad, 0) ^ 1;
+	return EQ(bad, 0);
 }
 
 /*

src/inner.h

@@ -114,6 +114,8 @@
 #define BR_64   1
 #elif defined(__x86_64__) || defined(_M_X64)
 #define BR_64   1
+#elif defined(__aarch64__) || defined(_M_ARM64)
+#define BR_64   1
 #endif
 #endif
 

src/int/i31_montmul.c

@@ -29,16 +29,45 @@ void
 br_i31_montymul(uint32_t *d, const uint32_t *x, const uint32_t *y,
 	const uint32_t *m, uint32_t m0i)
 {
+	/*
+	 * Each outer loop iteration computes:
+	 *   d <- (d + xu*y + f*m) / 2^31
+	 * We have xu <= 2^31-1 and f <= 2^31-1.
+	 * Thus, if d <= 2*m-1 on input, then:
+	 *   2*m-1 + 2*(2^31-1)*m <= (2^32)*m-1
+	 * and the new d value is less than 2*m.
+	 *
+	 * We represent d over 31-bit words, with an extra word 'dh'
+	 * which can thus be only 0 or 1.
+	 */
 	size_t len, len4, u, v;
-	uint64_t dh;
+	uint32_t dh;
 
 	len = (m[0] + 31) >> 5;
 	len4 = len & ~(size_t)3;
 	br_i31_zero(d, m[0]);
 	dh = 0;
 	for (u = 0; u < len; u ++) {
+		/*
+		 * The carry for each operation fits on 32 bits:
+		 *   d[v+1] <= 2^31-1
+		 *   xu*y[v+1] <= (2^31-1)*(2^31-1)
+		 *   f*m[v+1] <= (2^31-1)*(2^31-1)
+		 *   r <= 2^32-1
+		 *   (2^31-1) + 2*(2^31-1)*(2^31-1) + (2^32-1) = 2^63 - 2^31
+		 * After division by 2^31, the new r is then at most 2^32-1
+		 *
+		 * Using a 32-bit carry has performance benefits on 32-bit
+		 * systems; however, on 64-bit architectures, we prefer to
+		 * keep the carry (r) in a 64-bit register, thus avoiding some
+		 * "clear high bits" operations.
+		 */
 		uint32_t f, xu;
-		uint64_t r, zh;
+#if BR_64
+		uint64_t r;
+#else
+		uint32_t r;
+#endif
 
 		xu = x[u + 1];
 		f = MUL31_lo((d[1] + MUL31_lo(x[u + 1], y[1])), m0i);
@@ -73,9 +102,14 @@ br_i31_montymul(uint32_t *d, const uint32_t *x, const uint32_t *y,
 			d[v] = (uint32_t)z & 0x7FFFFFFF;
 		}
 
-		zh = dh + r;
-		d[len] = (uint32_t)zh & 0x7FFFFFFF;
-		dh = zh >> 31;
+		/*
+		 * Since the new dh can only be 0 or 1, the addition of
+		 * the old dh with the carry MUST fit on 32 bits, and
+		 * thus can be done into dh itself.
+		 */
+		dh += r;
+		d[len] = dh & 0x7FFFFFFF;
+		dh >>= 31;
 	}
 
 	/*

src/int/i31_mulacc.c

@@ -45,7 +45,20 @@ br_i31_mulacc(uint32_t *d, const uint32_t *a, const uint32_t *b)
 	for (u = 0; u < blen; u ++) {
 		uint32_t f;
 		size_t v;
+
+		/*
+		 * Carry always fits on 31 bits; we want to keep it in a
+		 * 32-bit register on 32-bit architectures (on a 64-bit
+		 * architecture, cast down from 64 to 32 bits means
+		 * clearing the high bits, which is not free; on a 32-bit
+		 * architecture, the same operation really means ignoring
+		 * the top register, which has negative or zero cost).
+		 */
+#if BR_64
 		uint64_t cc;
+#else
+		uint32_t cc;
+#endif
 
 		f = b[1 + u];
 		cc = 0;

src/int/i32_mulacc.c

@@ -36,7 +36,11 @@ br_i32_mulacc(uint32_t *d, const uint32_t *a, const uint32_t *b)
 	for (u = 0; u < blen; u ++) {
 		uint32_t f;
 		size_t v;
+#if BR_64
 		uint64_t cc;
+#else
+		uint32_t cc;
+#endif
 
 		f = b[1 + u];
 		cc = 0;