/* * Routines to access hardware * * Copyright (c) 2013 Realtek Semiconductor Corp. * * This module is a confidential and proprietary property of RealTek and * possession or use of this module requires written permission of RealTek. */ #ifndef _RTL8195A_UART_H_ #define _RTL8195A_UART_H_ #define MAX_UART_INDEX 2 #define RUART_DLL_OFF 0x00 #define RUART_DLM_OFF 0x04 //RW, DLAB = 1 #define RUART_INTERRUPT_EN_REG_OFF 0x04 #define RUART_IER_ERBI 0x01 //BIT0, Enable Received Data Available Interrupt (rx trigger) #define RUART_IER_ETBEI (1<<1) //BIT1, Enable Transmitter FIFO Empty Interrupt (tx fifo empty) #define RUART_IER_ELSI (1<<2) //BIT2, Enable Receiver Line Status Interrupt (receiver line status) #define RUART_IER_EDSSI (1<<3) //BIT3, Enable Modem Status Interrupt (modem status transition) #define RUART_INT_ID_REG_OFF 0x08 //[R] #define RUART_IIR_INT_PEND 0x01 #define RUART_IIR_INT_ID (0x07<<1) //011(3), 010(2), 110(6), 001(1), 000(0) #define RUART_FIFO_CTL_REG_OFF 0x08 //[W] #define RUART_FIFO_CTL_REG_CLEAR_RXFIFO (1<<1) //BIT1, 0x02, Write 1 clear #define RUART_FIFO_CTL_REG_CLEAR_TXFIFO (1<<2) //BIT2, 0x04, Write 1 clear #define RUART_FIFO_CTL_REG_DMA_ENABLE 0x08 //BIT3 #define FIFO_CTL_DEFAULT_WITH_FIFO_DMA 0xC9 #define FIFO_CTL_DEFAULT_WITH_FIFO 0xC1 #define RUART_MODEM_CTL_REG_OFF 0x10 #define RUART_MCR_RTS BIT1 #define RUART_MCL_AUTOFLOW_ENABLE (1<<5) //BIT5, 0x20 #define RUART_LINE_CTL_REG_OFF 0x0C #define RUART_LINE_CTL_REG_DLAB_ENABLE (1<<7) //BIT7, 0x80 #define RUART_LINE_STATUS_REG_OFF 0x14 #define RUART_LINE_STATUS_REG_DR 0x01 //BIT0, Data Ready indicator #define RUART_LINE_STATUS_ERR_OVERRUN (1<<1) //BIT1, Over Run #define RUART_LINE_STATUS_ERR_PARITY (1<<2) //BIT2, Parity error #define RUART_LINE_STATUS_ERR_FRAMING (1<<3) //BIT3, Framing error #define RUART_LINE_STATUS_ERR_BREAK (1<<4) //BIT4, Break interrupt error #define RUART_LINE_STATUS_REG_THRE (1<<5) //BIT5, 0x20, Transmit Holding Register Empty Interrupt enable #define RUART_LINE_STATUS_REG_TEMT (1<<6) //BIT6, 0x40, Transmitter Empty indicator(bit) #define RUART_LINE_STATUS_ERR_RXFIFO (1<<7) //BIT7, RX FIFO error #define RUART_LINE_STATUS_ERR (RUART_LINE_STATUS_ERR_OVERRUN|RUART_LINE_STATUS_ERR_PARITY| \ RUART_LINE_STATUS_ERR_FRAMING|RUART_LINE_STATUS_ERR_BREAK| \ RUART_LINE_STATUS_ERR_RXFIFO) //Line status error #define RUART_MODEM_STATUS_REG_OFF 0x18 //Modem Status Register #define RUART_SCRATCH_PAD_REG_OFF 0x1C //Scratch Pad Register #define RUART_SP_REG_RXBREAK_INT_STATUS (1<<7) //BIT7, 0x80, Write 1 clear #define RUART_SP_REG_DBG_SEL 0x0F<<8 //[11:8], Debug port selection #define RUART_SP_REG_XFACTOR_ADJ 0x7FF<<16 //[26:16] #define RUART_STS_REG_OFF 0x20 #define RUART_STS_REG_RESET_RCV (1<<3) //BIT3, 0x08, Reset Uart Receiver #define RUART_STS_REG_XFACTOR 0xF<<4 #define RUART_REV_BUF_REG_OFF 0x24 //Receiver Buffer Register #define RUART_TRAN_HOLD_REG_OFF 0x24 //Transmitter Holding Register #define RUART_MISC_CTL_REG_OFF 0x28 #define RUART_TXDMA_BURSTSIZE_MASK 0xF8 //7:3 #define RUART_RXDMA_BURSTSIZE_MASK 0x1F00 //12:8 #define RUART_DEBUG_REG_OFF 0x3C // RUART_LINE_CTL_REG_OFF (0x0C) #define BIT_SHIFT_LCR_WLS 0 // word length select: 0: 7 bits, 1: 8bits #define BIT_MASK_LCR_WLS_8BITS 0x1 #define BIT_LCR_WLS(x)(((x) & BIT_MASK_LCR_WLS_8BITS) << BIT_SHIFT_LCR_WLS) #define BIT_CLR_LCR_WLS (~(BIT_MASK_LCR_WLS_8BITS << BIT_SHIFT_LCR_WLS)) #define BIT_SHIFT_LCR_STB 2 // Stop bit select: 0: no stop bit, 1: 1 stop bit #define BIT_MASK_LCR_STB_EN 0x1 #define BIT_LCR_STB_EN(x)(((x) & BIT_MASK_LCR_STB_EN) << BIT_SHIFT_LCR_STB) #define BIT_INVC_LCR_STB_EN (~(BIT_MASK_LCR_STB_EN << BIT_SHIFT_LCR_STB)) #define BIT_SHIFT_LCR_PARITY_EN 3 #define BIT_MASK_LCR_PARITY_EN 0x1 #define BIT_LCR_PARITY_EN(x)(((x) & BIT_MASK_LCR_PARITY_EN) << BIT_SHIFT_LCR_PARITY_EN) #define BIT_INVC_LCR_PARITY_EN (~(BIT_MASK_LCR_PARITY_EN << BIT_SHIFT_LCR_PARITY_EN)) #define BIT_SHIFT_LCR_PARITY_TYPE 4 #define BIT_MASK_LCR_PARITY_TYPE 0x1 #define BIT_LCR_PARITY_TYPE(x)(((x) & BIT_MASK_LCR_PARITY_TYPE) << BIT_SHIFT_LCR_PARITY_TYPE) #define BIT_INVC_LCR_PARITY_TYPE (~(BIT_MASK_LCR_PARITY_TYPE << BIT_SHIFT_LCR_PARITY_TYPE)) #define BIT_SHIFT_LCR_STICK_PARITY_EN 5 #define BIT_MASK_LCR_STICK_PARITY_EN 0x1 #define BIT_LCR_STICK_PARITY_EN(x)(((x) & BIT_MASK_LCR_STICK_PARITY_EN) << BIT_SHIFT_LCR_STICK_PARITY_EN) #define BIT_INVC_LCR_STICK_PARITY_EN (~(BIT_MASK_LCR_STICK_PARITY_EN << BIT_SHIFT_LCR_STICK_PARITY_EN)) #define BIT_SHIFT_LCR_BREAK_CTRL 6 #define BIT_MASK_LCR_BREAK_CTRL 0x1 #define BIT_UART_LCR_BREAK_CTRL ((BIT_MASK_LCR_BREAK_CTRL) << BIT_SHIFT_LCR_BREAK_CTRL) #define RUART_BAUD_RATE_2400 2400 #define RUART_BAUD_RATE_4800 4800 #define RUART_BAUD_RATE_9600 9600 #define RUART_BAUD_RATE_19200 19200 #define RUART_BAUD_RATE_38400 38400 #define RUART_BAUD_RATE_57600 57600 #define RUART_BAUD_RATE_115200 115200 #define RUART_BAUD_RATE_921600 921600 #define RUART_BAUD_RATE_1152000 1152000 #define HAL_RUART_READ32(UartIndex, addr) \ HAL_READ32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr) #define HAL_RUART_WRITE32(UartIndex, addr, value) \ HAL_WRITE32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value) #define HAL_RUART_READ16(UartIndex, addr) \ HAL_READ16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr) #define HAL_RUART_WRITE16(UartIndex, addr, value) \ HAL_WRITE16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value) #define HAL_RUART_READ8(UartIndex, addr) \ HAL_READ8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr) #define HAL_RUART_WRITE8(UartIndex, addr, value) \ HAL_WRITE8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value) typedef struct _RUART_SPEED_SETTING_ { u32 BaudRate; u32 Ovsr; u32 Div; u32 Ovsr_adj; }RUART_SPEED_SETTING, *PRUART_SPEED_SETTING; typedef enum _UART_RXFIFO_TRIGGER_LEVEL_ { OneByte = 0x00, FourBytes = 0x01, EightBytes = 0x10, FourteenBytes = 0x11 }UART_RXFIFO_TRIGGER_LEVEL, *PUART_RXFIFO_TRIGGER_LEVEL; typedef enum _RUART0_PINMUX_SELECT_ { RUART0_MUX_TO_GPIOC = S0, RUART0_MUX_TO_GPIOE = S1, RUART0_MUX_TO_GPIOA = S2 }RUART0_PINMUX_SELECT, *PRUART0_PINMUX_SELECT; typedef enum _RUART1_PINMUX_SELECT_ { RUART1_MUX_TO_GPIOD = S0, RUART1_MUX_TO_GPIOE = S1, RUART1_MUX_TO_GPIOB = S2 }RUART1_PINMUX_SELECT, *PRUART1_PINMUX_SELECT; typedef enum _RUART2_PINMUX_SELECT_ { RUART2_MUX_TO_GPIOA = S0, RUART2_MUX_TO_GPIOC = S1, RUART2_MUX_TO_GPIOD = S2 }RUART2_PINMUX_SELECT, *PRUART2_PINMUX_SELECT; typedef enum _RUART_FLOW_CONTROL_ { AUTOFLOW_DISABLE = 0, AUTOFLOW_ENABLE = 1 }RUART_FLOW_CONTROL, *PRUART_FLOW_CONTROL; typedef enum _RUART_WORD_LEN_SEL_ { RUART_WLS_7BITS = 0, RUART_WLS_8BITS = 1 }RUART_WORD_LEN_SEL, *PRUART_WORD_LEN_SEL; typedef enum _RUART_STOP_BITS_ { RUART_NO_STOP_BIT = 0, RUART_1_STOP_BIT = 1 }RUART_STOP_BITS, *PRUART_STOP_BITS; typedef enum _RUART_PARITY_CONTROL_ { RUART_PARITY_DISABLE = 0, RUART_PARITY_ENABLE = 1 }RUART_PARITY_CONTROL, *PRUART_PARITY_CONTROL; typedef enum _RUART_PARITY_TYPE_ { RUART_ODD_PARITY = 0, RUART_EVEN_PARITY = 1 }RUART_PARITY_TYPE, *PRUART_PARITY_TYPE; typedef enum _RUART_STICK_PARITY_CONTROL_ { RUART_STICK_PARITY_DISABLE = 0, RUART_STICK_PARITY_ENABLE = 1 }RUART_STICK_PARITY_CONTROL, *PRUART_STICK_PARITY_CONTROL; typedef enum _UART_INT_ID_ { ModemStatus = 0, TxFifoEmpty = 1, ReceiverDataAvailable = 2, ReceivLineStatus = 3, TimeoutIndication = 6 }UART_INT_ID, *PUART_INT_ID; typedef enum _HAL_UART_State_ { HAL_UART_STATE_NULL = 0x00, // UART hardware not been initial yet HAL_UART_STATE_READY = 0x10, // UART is initialed, ready to use HAL_UART_STATE_BUSY = 0x20, // UART hardware is busy on configuration HAL_UART_STATE_BUSY_TX = 0x21, // UART is buzy on TX HAL_UART_STATE_BUSY_RX = 0x22, // UART is busy on RX HAL_UART_STATE_BUSY_TX_RX = 0x23, // UART is busy on TX an RX HAL_UART_STATE_TIMEOUT = 0x30, // Transfer timeout HAL_UART_STATE_ERROR = 0x40 // UART Error }HAL_UART_State, *PHAL_UART_State; typedef enum _HAL_UART_Status_ { HAL_UART_STATUS_OK = 0x00, // Transfer OK HAL_UART_STATUS_TIMEOUT = 0x01, // Transfer Timeout HAL_UART_STATUS_ERR_OVERRUN = 0x02, // RX Over run HAL_UART_STATUS_ERR_PARITY = 0x04, // Parity error HAL_UART_STATUS_ERR_FRAM = 0x08, // Framing Error HAL_UART_STATUS_ERR_BREAK = 0x10, // Break Interrupt HAL_UART_STATUS_ERR_PARA = 0x20, // Parameter error HAL_UART_STATUS_ERR_RXFIFO = 0x80, // RX FIFO error }HAL_UART_Status, *PHAL_UART_Status; u32 HalRuartGetDebugValueRtl8195a( IN VOID* Data, IN u32 DbgSel ); #if 0 u32 FindElementIndex( u32 Element, u32* Array ); #endif VOID RuartResetRxFifoRtl8195a( IN u8 UartIndex ); #if 0 VOID RuartBusDomainEnableRtl8195a( IN u8 UartIndex ); #endif HAL_Status HalRuartResetRxFifoRtl8195a( IN VOID *Data ); HAL_Status HalRuartInitRtl8195a( IN VOID *Data ); VOID HalRuartDeInitRtl8195a( IN VOID *Data ///< RUART Adapter ); HAL_Status HalRuartPutCRtl8195a( IN VOID *Data, IN u8 TxData ); u32 HalRuartSendRtl8195a( IN VOID *Data, IN u8 *pTxData, IN u32 Length, IN u32 Timeout ); HAL_Status HalRuartIntSendRtl8195a( IN VOID *Data, // PHAL_RUART_ADAPTER IN u8 *pTxData, // the Buffer to be send IN u32 Length // the length of data to be send ); HAL_Status HalRuartDmaSendRtl8195a( IN VOID *Data, // PHAL_RUART_ADAPTER IN u8 *pTxData, // the Buffer to be send IN u32 Length // the length of data to be send ); HAL_Status HalRuartStopSendRtl8195a( IN VOID *Data // PHAL_RUART_ADAPTER ); HAL_Status HalRuartGetCRtl8195a( IN VOID *Data, OUT u8 *pRxByte ); u32 HalRuartRecvRtl8195a( IN VOID *Data, IN u8 *pRxData, IN u32 Length, IN u32 Timeout ); HAL_Status HalRuartIntRecvRtl8195a( IN VOID *Data, ///< RUART Adapter IN u8 *pRxData, ///< Rx buffer IN u32 Length // buffer length ); HAL_Status HalRuartDmaRecvRtl8195a( IN VOID *Data, ///< RUART Adapter IN u8 *pRxData, ///< Rx buffer IN u32 Length // buffer length ); HAL_Status HalRuartStopRecvRtl8195a( IN VOID *Data // PHAL_RUART_ADAPTER ); u8 HalRuartGetIMRRtl8195a( IN VOID *Data ); _LONG_CALL_ VOID HalRuartSetIMRRtl8195a( IN VOID *Data ); VOID HalRuartDmaInitRtl8195a( IN VOID *Data ); VOID HalRuartRTSCtrlRtl8195a( IN VOID *Data, IN BOOLEAN RtsCtrl ); VOID HalRuartRegIrqRtl8195a( IN VOID *Data ); VOID HalRuartIntEnableRtl8195a( IN VOID *Data ); VOID HalRuartIntDisableRtl8195a( IN VOID *Data ); VOID HalRuartAdapterLoadDefRtl8195a( IN VOID *pAdp, IN u8 UartIdx ); VOID HalRuartTxGdmaLoadDefRtl8195a( IN VOID *pAdp, IN VOID *pCfg ); VOID HalRuartRxGdmaLoadDefRtl8195a( IN VOID *pAdp, IN VOID *pCfg ); _LONG_CALL_ HAL_Status HalRuartIntSendRtl8195aV02( IN VOID *Data, // PHAL_RUART_ADAPTER IN u8 *pTxData, // the Buffer to be send IN u32 Length // the length of data to be send ); _LONG_CALL_ HAL_Status HalRuartIntRecvRtl8195aV02( IN VOID *Data, ///< RUART Adapter IN u8 *pRxData, ///< Rx buffer IN u32 Length // buffer length ); _LONG_CALL_ s32 FindElementIndex_v02( u32 Element, ///< RUART Baudrate u32* Array, ///< Pre-defined Baudrate Array u32 ElementNo ); _LONG_CALL_ HAL_Status HalRuartInitRtl8195a_v02(IN VOID *Data); #endif