/* * Routines to access hardware * * Copyright (c) 2013 Realtek Semiconductor Corp. * * This module is a confidential and proprietary property of RealTek and * possession or use of this module requires written permission of RealTek. */ #ifndef _HAL_ADC_H_ #define _HAL_ADC_H_ #include "rtl8195a.h" #include "rtl8195a_adc.h" #include "hal_gdma.h" //================ ADC Configuration ========================= #define ADC_INTR_OP_TYPE 1 #define ADC_DMA_OP_TYPE 1 // ADC SAL management macros #define SAL_ADC_USER_CB_NUM (sizeof(SAL_ADC_USER_CB) / sizeof(PSAL_ADC_USERCB_ADPT)) // ADC used module. // Please set the ADC module flag to 1 to enable the related #define ADC0_USED 1 #define ADC1_USED 1 #define ADC2_USED 1 #define ADC3_USED 1 //================ Debug MSG Definition ======================= #define ADC_PREFIX "RTL8195A[adc]: " #define ADC_PREFIX_LVL " [ADC_DBG]: " typedef enum _ADC_DBG_LVL_ { HAL_ADC_LVL = 0x01, SAL_ADC_LVL = 0x02, VERI_ADC_LVL = 0x04, }ADC_DBG_LVL,*PADC_DBG_LVL; #ifdef CONFIG_DEBUG_LOG #ifdef CONFIG_DEBUG_LOG_ADC_HAL #define DBG_8195A_ADC(...) do{ \ _DbgDump("\r"ADC_PREFIX __VA_ARGS__);\ }while(0) #define ADCDBGLVL 0xFF #define DBG_8195A_ADC_LVL(LVL,...) do{\ if (LVL&ADCDBGLVL){\ _DbgDump("\r"ADC_PREFIX_LVL __VA_ARGS__);\ }\ }while(0) #else #define DBG_ADC_LOG_PERD 100 #define DBG_8195A_ADC(...) #define DBG_8195A_ADC_LVL(...) #endif #endif //================ ADC HAL Related Enumeration ================== // ADC Module Selection typedef enum _ADC_MODULE_SEL_ { ADC0_SEL = 0x0, ADC1_SEL = 0x1, ADC2_SEL = 0x2, ADC3_SEL = 0x3, }ADC_MODULE_SEL,*PADC_MODULE_SEL; // ADC module status typedef enum _ADC_MODULE_STATUS_ { ADC_DISABLE = 0x0, ADC_ENABLE = 0x1, }ADC_MODULE_STATUS, *PADC_MODULE_STATUS; // ADC Data Endian typedef enum _ADC_DATA_ENDIAN_ { ADC_DATA_ENDIAN_LITTLE = 0x0, ADC_DATA_ENDIAN_BIG = 0x1, }ADC_DATA_ENDIAN,*PADC_DATA_ENDIAN; // ADC Debug Select typedef enum _ADC_DEBUG_SEL_ { ADC_DBG_SEL_DISABLE = 0x0, ADC_DBG_SEL_ENABLE = 0x1, }ADC_DEBUG_SEL,*PADC_DEBUG_SEL; typedef enum _ADC_COMPARE_SET_ { ADC_COMP_SMALLER_THAN = 0x0, ADC_COMP_GREATER_THAN = 0x1, }ADC_COMPARE_SET, *PADC_COMPARE_SET; // ADC feature status typedef enum _ADC_FEATURE_STATUS_{ ADC_FEATURE_DISABLED = 0, ADC_FEATURE_ENABLED = 1, }ADC_FEATURE_STATUS,*PADC_FEATURE_STATUS; // ADC operation type typedef enum _ADC_OP_TYPE_ { ADC_RDREG_TYPE = 0x0, ADC_DMA_TYPE = 0x1, ADC_INTR_TYPE = 0x2, }ADC_OP_TYPE, *PADC_OP_TYPE; // ADC device status typedef enum _ADC_DEVICE_STATUS_ { ADC_STS_UNINITIAL = 0x00, ADC_STS_INITIALIZED = 0x01, ADC_STS_IDLE = 0x02, ADC_STS_TX_READY = 0x03, ADC_STS_TX_ING = 0x04, ADC_STS_RX_READY = 0x05, ADC_STS_RX_ING = 0x06, ADC_STS_ERROR = 0x07, ADC_STS_FULL = 0x08, }ADC_DEVICE_STATUS, *PADC_DEVICE_STATUS; // ADC error type typedef enum _ADC_ERR_TYPE_ { ADC_ERR_FIFO_RD_ERROR = 0x40, //ADC FIFO read error }ADC_ERR_TYPE, *PADC_ERR_TYPE; // ADC initial status typedef enum _ADC_INITAIL_STATUS_ { ADC0_INITED = 0x1, ADC1_INITED = 0x2, ADC2_INITED = 0x4, ADC3_INITED = 0x8, }ADC_INITAIL_STATUS, *PADC_INITAIL_STATUS; //================ ADC HAL Data Structure ====================== // ADC HAL initial data structure typedef struct _HAL_ADC_INIT_DAT_ { u8 ADCIdx; //ADC index used u8 ADCEn; //ADC module enable u8 ADCEndian; //ADC endian selection, //but actually it's for 32-bit ADC data swap control //1'b0: no swap, //1'b1: swap the upper 16-bit and the lower 16-bit u8 ADCBurstSz; //ADC DMA operation threshold u8 ADCCompOnly; //ADC compare mode only enable (without FIFO enable) u8 ADCOneShotEn; //ADC one-shot mode enable u8 ADCOverWREn; //ADC overwrite mode enable u8 ADCOneShotTD; //ADC one shot mode threshold u16 ADCCompCtrl; //ADC compare mode control, //1'b0:less than the compare threshold //1'b1:greater than the compare threshod u16 ADCCompTD; //ADC compare mode threshold u8 ADCDataRate; //ADC down sample data rate, u8 ADCAudioEn; //ADC audio mode enable u8 ADCEnManul; //ADC enable manually u8 ADCDbgSel; u32 RSVD0; u32 *ADCData; //ADC data pointer u32 ADCPWCtrl; //ADC0 power control u32 ADCIntrMSK; //ADC Interrupt Mask u32 ADCAnaParAd3; //ADC analog parameter 3 u32 ADCInInput; //ADC Input is internal? }HAL_ADC_INIT_DAT,*PHAL_ADC_INIT_DAT; // ADC HAL Operations typedef struct _HAL_ADC_OP_ { RTK_STATUS (*HalADCInit) (VOID *Data); //HAL ADC initialization RTK_STATUS (*HalADCDeInit) (VOID *Data); //HAL ADC de-initialization RTK_STATUS (*HalADCEnable) (VOID *Data); //HAL ADC de-initialization u32 (*HalADCReceive) (VOID *Data); //HAL ADC receive RTK_STATUS (*HalADCIntrCtrl) (VOID *Data); //HAL ADC interrupt control u32 (*HalADCReadReg) (VOID *Data, u8 ADCReg);//HAL ADC read register }HAL_ADC_OP, *PHAL_ADC_OP; // ADC user callback adapter typedef struct _SAL_ADC_USERCB_ADPT_ { VOID (*USERCB) (VOID *Data); u32 USERData; }SAL_ADC_USERCB_ADPT, *PSAL_ADC_USERCB_ADPT; // ADC user callback structure typedef struct _SAL_ADC_USER_CB_ { PSAL_ADC_USERCB_ADPT pTXCB; //ADC Transmit Callback PSAL_ADC_USERCB_ADPT pTXCCB; //ADC Transmit Complete Callback PSAL_ADC_USERCB_ADPT pRXCB; //ADC Receive Callback PSAL_ADC_USERCB_ADPT pRXCCB; //ADC Receive Complete Callback PSAL_ADC_USERCB_ADPT pRDREQCB; //ADC Read Request Callback PSAL_ADC_USERCB_ADPT pERRCB; //ADC Error Callback PSAL_ADC_USERCB_ADPT pDMATXCB; //ADC DMA Transmit Callback PSAL_ADC_USERCB_ADPT pDMATXCCB; //ADC DMA Transmit Complete Callback PSAL_ADC_USERCB_ADPT pDMARXCB; //ADC DMA Receive Callback PSAL_ADC_USERCB_ADPT pDMARXCCB; //ADC DMA Receive Complete Callback }SAL_ADC_USER_CB, *PSAL_ADC_USER_CB; // ADC Transmit Buffer typedef struct _SAL_ADC_TRANSFER_BUF_ { u32 DataLen; //ADC Transmfer Length u32 *pDataBuf; //ADC Transfer Buffer Pointer u32 RSVD; // }SAL_ADC_TRANSFER_BUF,*PSAL_ADC_TRANSFER_BUF; typedef struct _SAL_ADC_DMA_USER_DEF_ { u8 TxDatSrcWdth; u8 TxDatDstWdth; u8 TxDatSrcBstSz; u8 TxDatDstBstSz; u8 TxChNo; u8 LlpCtrl; u16 RSVD0; u32 MaxMultiBlk; u32 pLlix; u32 pBlockSizeList; }SAL_ADC_DMA_USER_DEF, *PSAL_ADC_DMA_USER_DEF; // Software API Level ADC Handler typedef struct _SAL_ADC_HND_ { u8 DevNum; //ADC device number u8 PinMux; //ADC pin mux seletion u8 OpType; //ADC operation type selection volatile u8 DevSts; //ADC device status u32 ADCExd; //ADC extended options: //bit 0: example //bit 31~bit 1: Reserved u32 ErrType; // u32 TimeOut; //ADC IO Timeout count PHAL_ADC_INIT_DAT pInitDat; //Pointer to ADC initial data struct PSAL_ADC_TRANSFER_BUF pRXBuf; //Pointer to ADC TX buffer PSAL_ADC_USER_CB pUserCB; //Pointer to ADC User Callback }SAL_ADC_HND, *PSAL_ADC_HND; // ADC SAL handle private typedef struct _SAL_ADC_HND_PRIV_ { VOID **ppSalADCHnd; //Pointer to SAL_ADC_HND pointer SAL_ADC_HND SalADCHndPriv; //Private SAL_ADC_HND }SAL_ADC_HND_PRIV, *PSAL_ADC_HND_PRIV; //ADC SAL management adapter typedef struct _SAL_ADC_MNGT_ADPT_ { PSAL_ADC_HND_PRIV pSalHndPriv; //Pointer to SAL_ADC_HND PHAL_ADC_INIT_DAT pHalInitDat; //Pointer to HAL ADC initial data( HAL_ADC_INIT_DAT ) PHAL_ADC_OP pHalOp; //Pointer to HAL ADC operation( HAL_ADC_OP ) VOID (*pHalOpInit)(VOID*);//Pointer to HAL ADC initialize function PIRQ_HANDLE pIrqHnd; //Pointer to IRQ handler in SAL layer( IRQ_HANDLE ) VOID (*pSalIrqFunc)(VOID*); //Used for SAL ADC interrupt function PSAL_ADC_DMA_USER_DEF pDMAConf; //Pointer to DAC User Define DMA config PHAL_GDMA_ADAPTER pHalGdmaAdp; PHAL_GDMA_OP pHalGdmaOp; PIRQ_HANDLE pIrqGdmaHnd; VOID (*pHalGdmaOpInit)(VOID*); //Pointer to HAL DAC initialize function PSAL_ADC_USER_CB pUserCB; //Pointer to SAL user callbacks (SAL_ADC_USER_CB ) VOID (*pSalDMAIrqFunc)(VOID*); //Used for SAL DAC interrupt function }SAL_ADC_MNGT_ADPT, *PSAL_ADC_MNGT_ADPT; //================ ADC HAL Function Prototype =================== // ADC HAL inline function // For checking I2C input index valid or not static inline RTK_STATUS RtkADCIdxChk( IN u8 ADCIdx ) { #if !ADC0_USED if (ADCIdx == ADC0_SEL) return _EXIT_FAILURE; #endif #if !ADC1_USED if (ADCIdx == ADC1_SEL) return _EXIT_FAILURE; #endif #if !ADC2_USED if (ADCIdx == ADC2_SEL) return _EXIT_FAILURE; #endif #if !ADC3_USED if (ADCIdx == ADC3_SEL) return _EXIT_FAILURE; #endif return _EXIT_SUCCESS; } VOID HalADCOpInit(IN VOID *Data); PSAL_ADC_HND RtkADCGetSalHnd(IN u8 DACIdx); RTK_STATUS RtkADCFreeSalHnd(IN PSAL_ADC_HND pSalADCHND); RTK_STATUS RtkADCLoadDefault(IN VOID *Data); RTK_STATUS RtkADCInit(IN VOID *Data); RTK_STATUS RtkADCDeInit(IN VOID *Data); //RTK_STATUS RtkADCReceive(IN VOID *Data); u32 RtkADCReceive(IN VOID *Data); u32 RtkADCReceiveBuf(IN VOID *Data,IN u32 *pBuf); PSAL_ADC_MNGT_ADPT RtkADCGetMngtAdpt(IN u8 ADCIdx); RTK_STATUS RtkADCFreeMngtAdpt(IN PSAL_ADC_MNGT_ADPT pSalADCMngtAdpt); VOID ADCISRHandle(IN VOID *Data); VOID ADCGDMAISRHandle(IN VOID *Data); #endif