ameba-sdk-gcc-make/component/common/mbed/targets/hal/rtl8195a/objects.h
2016-06-04 19:09:35 +08:00

177 lines
3.8 KiB
C
Executable file

/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_OBJECTS_H
#define MBED_OBJECTS_H
#include "cmsis.h"
#include "PortNames.h"
#include "PeripheralNames.h"
#include "PinNames.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef CONFIG_GPIO_EN
struct gpio_irq_s {
PinName pin;
uint32_t event;
HAL_GPIO_PIN hal_pin;
};
typedef struct gpio_irq_s gpio_irq_t;
struct gpio_s {
PinName pin;
PinMode mode;
PinDirection direction;
HAL_GPIO_PIN hal_pin;
};
typedef struct gpio_s gpio_t;
struct port_s {
PortName port;
uint32_t mask;
PinDirection direction;
uint8_t *pin_def;
};
#endif // end of "#ifdef CONFIG_GPIO_EN"
#ifdef CONFIG_UART_EN
struct serial_s {
HAL_RUART_OP hal_uart_op;
HAL_RUART_ADAPTER hal_uart_adp;
#ifdef CONFIG_GDMA_EN
UART_DMA_CONFIG uart_gdma_cfg;
HAL_GDMA_ADAPTER uart_gdma_adp_tx;
HAL_GDMA_ADAPTER uart_gdma_adp_rx;
#endif
uint32_t tx_len;
uint32_t rx_len;
};
#endif // end of "#ifdef CONFIG_UART_EN"
#ifdef CONFIG_SPI_COM_EN
#endif
#ifdef CONFIG_PWM_EN
struct pwmout_s {
uint8_t pwm_idx;
uint8_t pin_sel;
uint32_t period;
uint32_t pulse;
};
#endif
#ifdef CONFIG_I2C_EN
struct i2c_s {
SAL_I2C_MNGT_ADPT SalI2CMngtAdpt;
SAL_I2C_HND_PRIV SalI2CHndPriv;
HAL_I2C_INIT_DAT HalI2CInitData;
HAL_I2C_OP HalI2COp;
IRQ_HANDLE I2CIrqHandleDat;
HAL_GDMA_ADAPTER HalI2CTxGdmaAdpt;
HAL_GDMA_ADAPTER HalI2CRxGdmaAdpt;
HAL_GDMA_OP HalI2CGdmaOp;
IRQ_HANDLE I2CTxGdmaIrqHandleDat;
IRQ_HANDLE I2CRxGdmaIrqHandleDat;
SAL_I2C_USER_CB SalI2CUserCB;
SAL_I2C_USERCB_ADPT SalI2CUserCBAdpt[SAL_USER_CB_NUM];
SAL_I2C_DMA_USER_DEF SalI2CDmaUserDef;
};
#endif
struct flash_s
{
SPIC_INIT_PARA SpicInitPara;
u32 Length;
};
#ifdef CONFIG_ADC_EN
struct analogin_s {
SAL_ADC_MNGT_ADPT SalADCMngtAdpt;
SAL_ADC_HND_PRIV SalADCHndPriv;
HAL_ADC_INIT_DAT HalADCInitData;
HAL_ADC_OP HalADCOp;
IRQ_HANDLE ADCIrqHandleDat;
HAL_GDMA_ADAPTER HalADCGdmaAdpt;
HAL_GDMA_OP HalADCGdmaOp;
IRQ_HANDLE ADCGdmaIrqHandleDat;
SAL_ADC_USER_CB SalADCUserCB;
SAL_ADC_USERCB_ADPT SalADCUserCBAdpt[SAL_ADC_USER_CB_NUM];
};
#endif
#if 0
struct i2c_s {
I2C_Type *i2c;
};
struct spi_s {
SPI_Type *spi;
};
#endif
#ifdef CONFIG_NFC_EN
struct nfctag_s {
NFC_ADAPTER NFCAdapter;
void *nfc_rd_cb; // read callback function
void *rd_cb_arg;
void *nfc_wr_cb; // write callback function
void *wr_cb_arg;
void *nfc_ev_cb; // event callback function
void *ev_cb_arg;
void *nfc_cache_rd_cb; // cache read callback function
void *cache_read_cb_arg;
unsigned int event_mask;
int pwr_status;
};
#endif
#ifdef CONFIG_TIMER_EN
struct gtimer_s {
TIMER_ADAPTER hal_gtimer_adp;
void *handler;
u32 hid;
u8 timer_id;
u8 is_periodcal;
};
#endif
#ifdef CONFIG_I2S_EN
struct i2s_s {
HAL_I2S_ADAPTER I2SAdapter;
HAL_I2S_INIT_DAT InitDat;
u8 sampling_rate;
u8 channel_num;
u8 word_length;
u8 direction;
};
#endif
#ifdef __cplusplus
}
#endif
#endif