mirror of
https://github.com/xushoucai/RTL8710_SDK_GCC_VERSION.git
synced 2024-11-24 05:24:15 +00:00
905d81784e
including cross compilation of the installation, compile, link, run, debug, and so on. SDK implementation of the function: 1, WiFi connection settings (including AP mode and STA mode). 2, peripheral resource control (including GPIO, SPI, UART, IIC, etc.). 3, the user uses the sample method.
816 lines
41 KiB
C
816 lines
41 KiB
C
/* ----------------------------------------------------------------------
|
|
* $Date: 5. February 2013
|
|
* $Revision: V1.02
|
|
*
|
|
* Project: CMSIS-RTOS API
|
|
* Title: cmsis_os.h template header file
|
|
*
|
|
* Version 0.02
|
|
* Initial Proposal Phase
|
|
* Version 0.03
|
|
* osKernelStart added, optional feature: main started as thread
|
|
* osSemaphores have standard behavior
|
|
* osTimerCreate does not start the timer, added osTimerStart
|
|
* osThreadPass is renamed to osThreadYield
|
|
* Version 1.01
|
|
* Support for C++ interface
|
|
* - const attribute removed from the osXxxxDef_t typedef's
|
|
* - const attribute added to the osXxxxDef macros
|
|
* Added: osTimerDelete, osMutexDelete, osSemaphoreDelete
|
|
* Added: osKernelInitialize
|
|
* Version 1.02
|
|
* Control functions for short timeouts in microsecond resolution:
|
|
* Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec
|
|
* Removed: osSignalGet
|
|
*----------------------------------------------------------------------------
|
|
*
|
|
* Copyright (c) 2013 ARM LIMITED
|
|
* All rights reserved.
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* - Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* - Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* - Neither the name of ARM nor the names of its contributors may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
#include "FreeRTOS.h"
|
|
#include "task.h"
|
|
#include "timers.h"
|
|
#include "queue.h"
|
|
#include "semphr.h"
|
|
|
|
|
|
#define FREERTOS_VERSION 0x00080001 // bits[31:16] main version, bits[15:0] sub-version
|
|
|
|
#if FREERTOS_VERSION >= 0x00080000
|
|
#define configSignalManagementSupport 1
|
|
#else
|
|
#define configSignalManagementSupport 0
|
|
#endif
|
|
|
|
#if configSignalManagementSupport
|
|
#include "event_groups.h"
|
|
#endif
|
|
|
|
/**
|
|
\page cmsis_os_h Header File Template: cmsis_os.h
|
|
|
|
The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS).
|
|
Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents
|
|
its implementation.
|
|
|
|
The file cmsis_os.h contains:
|
|
- CMSIS-RTOS API function definitions
|
|
- struct definitions for parameters and return types
|
|
- status and priority values used by CMSIS-RTOS API functions
|
|
- macros for defining threads and other kernel objects
|
|
|
|
|
|
<b>Name conventions and header file modifications</b>
|
|
|
|
All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions.
|
|
Definitions that are prefixed \b os_ are not used in the application code but local to this header file.
|
|
All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread.
|
|
|
|
Definitions that are marked with <b>CAN BE CHANGED</b> can be adapted towards the needs of the actual CMSIS-RTOS implementation.
|
|
These definitions can be specific to the underlying RTOS kernel.
|
|
|
|
Definitions that are marked with <b>MUST REMAIN UNCHANGED</b> cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer
|
|
compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation.
|
|
|
|
|
|
<b>Function calls from interrupt service routines</b>
|
|
|
|
The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR):
|
|
- \ref osSignalSet
|
|
- \ref osSemaphoreRelease
|
|
- \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree
|
|
- \ref osMessagePut, \ref osMessageGet
|
|
- \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree
|
|
|
|
Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called
|
|
from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector.
|
|
|
|
Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time.
|
|
If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive.
|
|
|
|
|
|
<b>Define and reference object definitions</b>
|
|
|
|
With <b>\#define osObjectsExternal</b> objects are defined as external symbols. This allows to create a consistent header file
|
|
that is used throughout a project as shown below:
|
|
|
|
<i>Header File</i>
|
|
\code
|
|
#include <cmsis_os.h> // CMSIS RTOS header file
|
|
|
|
// Thread definition
|
|
extern void thread_sample (void const *argument); // function prototype
|
|
osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100);
|
|
|
|
// Pool definition
|
|
osPoolDef(MyPool, 10, long);
|
|
\endcode
|
|
|
|
|
|
This header file defines all objects when included in a C/C++ source file. When <b>\#define osObjectsExternal</b> is
|
|
present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be
|
|
used throughout the whole project.
|
|
|
|
<i>Example</i>
|
|
\code
|
|
#include "osObjects.h" // Definition of the CMSIS-RTOS objects
|
|
\endcode
|
|
|
|
\code
|
|
#define osObjectExternal // Objects will be defined as external symbols
|
|
#include "osObjects.h" // Reference to the CMSIS-RTOS objects
|
|
\endcode
|
|
|
|
*/
|
|
|
|
#ifndef _CMSIS_OS_H
|
|
#define _CMSIS_OS_H
|
|
|
|
/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version.
|
|
#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0])
|
|
|
|
/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number.
|
|
#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0])
|
|
|
|
/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS.
|
|
#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string
|
|
|
|
/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS.
|
|
#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available
|
|
#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available
|
|
#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available
|
|
#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available
|
|
#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread
|
|
#define osFeature_Semaphore 30 ///< maximum count for \ref osSemaphoreCreate function
|
|
#define osFeature_Wait 1 ///< osWait function: 1=available, 0=not available
|
|
#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available
|
|
|
|
//#include <stdint.h>
|
|
#include <stddef.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
// ==== Enumeration, structures, defines ====
|
|
|
|
/// Priority used for thread control.
|
|
/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS.
|
|
typedef enum {
|
|
osPriorityIdle = -3, ///< priority: idle (lowest)
|
|
osPriorityLow = -2, ///< priority: low
|
|
osPriorityBelowNormal = -1, ///< priority: below normal
|
|
osPriorityNormal = 0, ///< priority: normal (default)
|
|
osPriorityAboveNormal = +1, ///< priority: above normal
|
|
osPriorityHigh = +2, ///< priority: high
|
|
osPriorityRealtime = +3, ///< priority: realtime (highest)
|
|
osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority
|
|
} osPriority;
|
|
|
|
/// Timeout value.
|
|
/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS.
|
|
#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value
|
|
|
|
/// Status code values returned by CMSIS-RTOS functions.
|
|
/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS.
|
|
typedef enum {
|
|
osOK = 0, ///< function completed; no error or event occurred.
|
|
osEventSignal = 0x08, ///< function completed; signal event occurred.
|
|
osEventMessage = 0x10, ///< function completed; message event occurred.
|
|
osEventMail = 0x20, ///< function completed; mail event occurred.
|
|
osEventTimeout = 0x40, ///< function completed; timeout occurred.
|
|
osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object.
|
|
osErrorResource = 0x81, ///< resource not available: a specified resource was not available.
|
|
osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period.
|
|
osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines.
|
|
osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object.
|
|
osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority.
|
|
osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation.
|
|
osErrorValue = 0x86, ///< value of a parameter is out of range.
|
|
osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits.
|
|
os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization.
|
|
} osStatus;
|
|
|
|
|
|
/// Timer type value for the timer definition.
|
|
/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS.
|
|
typedef enum {
|
|
osTimerOnce = 0, ///< one-shot timer
|
|
osTimerPeriodic = 1 ///< repeating timer
|
|
} os_timer_type;
|
|
|
|
/// Entry point of a thread.
|
|
/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS.
|
|
typedef void (*os_pthread) (void const *argument);
|
|
|
|
/// Entry point of a timer call back function.
|
|
/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS.
|
|
typedef void (*os_ptimer) (void const *argument);
|
|
|
|
// >>> the following data type definitions may shall adapted towards a specific RTOS
|
|
|
|
/// Thread ID identifies the thread (pointer to a thread control block).
|
|
/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef xTaskHandle osThreadId;
|
|
|
|
/// Timer ID identifies the timer (pointer to a timer control block).
|
|
/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef xTimerHandle osTimerId;
|
|
|
|
/// Mutex ID identifies the mutex (pointer to a mutex control block).
|
|
/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef xSemaphoreHandle osMutexId;
|
|
|
|
/// Semaphore ID identifies the semaphore (pointer to a semaphore control block).
|
|
/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef xSemaphoreHandle osSemaphoreId;
|
|
|
|
/// Pool ID identifies the memory pool (pointer to a memory pool control block).
|
|
/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_pool_cb *osPoolId;
|
|
|
|
/// Message ID identifies the message queue (pointer to a message queue control block).
|
|
/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef xQueueHandle osMessageQId;
|
|
|
|
/// Mail ID identifies the mail queue (pointer to a mail queue control block).
|
|
/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_mailQ_cb *osMailQId;
|
|
|
|
|
|
/// Thread Definition structure contains startup information of a thread.
|
|
/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_thread_def {
|
|
os_pthread pthread; ///< start address of thread function
|
|
osPriority tpriority; ///< initial thread priority
|
|
uint32_t instances; ///< maximum number of instances of that thread function
|
|
uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size
|
|
char * name;
|
|
} osThreadDef_t;
|
|
|
|
/// Timer Definition structure contains timer parameters.
|
|
/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS.
|
|
struct os_timer_custom {
|
|
void *argument;
|
|
};
|
|
|
|
typedef struct os_timer_def {
|
|
os_ptimer ptimer; ///< start address of a timer function
|
|
struct os_timer_custom *custom;
|
|
} osTimerDef_t;
|
|
|
|
/// Mutex Definition structure contains setup information for a mutex.
|
|
/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_mutex_def {
|
|
uint32_t dummy; ///< dummy value.
|
|
} osMutexDef_t;
|
|
|
|
/// Semaphore Definition structure contains setup information for a semaphore.
|
|
/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_semaphore_def {
|
|
uint32_t dummy; ///< dummy value.
|
|
} osSemaphoreDef_t;
|
|
|
|
/// Definition structure for memory block allocation
|
|
/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_pool_def {
|
|
uint32_t pool_sz; ///< number of items (elements) in the pool
|
|
uint32_t item_sz; ///< size of an item
|
|
void *pool; ///< pointer to memory for pool
|
|
} osPoolDef_t;
|
|
|
|
/// Definition structure for message queue.
|
|
/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_messageQ_def {
|
|
uint32_t queue_sz; ///< number of elements in the queue
|
|
uint32_t item_sz; ///< size of an item
|
|
void *pool; ///< memory array for messages
|
|
} osMessageQDef_t;
|
|
|
|
/// Definition structure for mail queue
|
|
/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS.
|
|
typedef struct os_mailQ_def {
|
|
uint32_t queue_sz; ///< number of elements in the queue
|
|
uint32_t item_sz; ///< size of an item
|
|
struct os_mailQ_cb **cb;
|
|
} osMailQDef_t;
|
|
|
|
/// Event structure contains detailed information about an event.
|
|
/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS.
|
|
/// However the struct may be extended at the end.
|
|
typedef struct {
|
|
osStatus status; ///< status code: event or error information
|
|
union {
|
|
uint32_t v; ///< message as 32-bit value
|
|
void *p; ///< message or mail as void pointer
|
|
int32_t signals; ///< signal flags
|
|
} value; ///< event value
|
|
union {
|
|
osMailQId mail_id; ///< mail id obtained by \ref osMailCreate
|
|
osMessageQId message_id; ///< message id obtained by \ref osMessageCreate
|
|
} def; ///< event definition
|
|
} osEvent;
|
|
|
|
|
|
// ==== Kernel Control Functions ====
|
|
|
|
/// Initialize the RTOS Kernel for creating objects.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS.
|
|
osStatus osKernelInitialize (void);
|
|
|
|
/// Start the RTOS Kernel.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS.
|
|
osStatus osKernelStart (void);
|
|
|
|
/// Check if the RTOS kernel is already started.
|
|
/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS.
|
|
/// \return 0 RTOS is not started, 1 RTOS is started.
|
|
int32_t osKernelRunning(void);
|
|
|
|
#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available
|
|
|
|
/// Get the RTOS kernel system timer counter
|
|
/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS.
|
|
/// \return RTOS kernel system timer as 32-bit value
|
|
uint32_t osKernelSysTick (void);
|
|
|
|
/// The RTOS kernel system timer frequency in Hz
|
|
/// \note Reflects the system timer setting and is typically defined in a configuration file.
|
|
#define osKernelSysTickFrequency configTICK_RATE_HZ
|
|
|
|
/// Convert a microseconds value to a RTOS kernel system timer value.
|
|
/// \param microsec time value in microseconds.
|
|
/// \return time value normalized to the \ref osKernelSysTickFrequency
|
|
#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000)
|
|
|
|
#endif // System Timer available
|
|
|
|
// ==== Thread Management ====
|
|
|
|
/// Create a Thread Definition with function, priority, and stack requirements.
|
|
/// \param name name of the thread function.
|
|
/// \param priority initial priority of the thread function.
|
|
/// \param instances number of possible thread instances.
|
|
/// \param stacksz stack size (in bytes) requirements for the thread function.
|
|
/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osThreadDef(name, priority, instances, stacksz) \
|
|
extern const osThreadDef_t os_thread_def_##name
|
|
#else // define the object
|
|
#define osThreadDef(name, priority, instances, stacksz) \
|
|
const osThreadDef_t os_thread_def_##name = \
|
|
{ (name), (priority), (instances), (stacksz), #name }
|
|
#endif
|
|
|
|
/// Access a Thread definition.
|
|
/// \param name name of the thread definition object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osThread(name) \
|
|
&os_thread_def_##name
|
|
|
|
/// Create a thread and add it to Active Threads and set it to state READY.
|
|
/// \param[in] thread_def thread definition referenced with \ref osThread.
|
|
/// \param[in] argument pointer that is passed to the thread function as start argument.
|
|
/// \return thread ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS.
|
|
osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument);
|
|
|
|
/// Return the thread ID of the current running thread.
|
|
/// \return thread ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS.
|
|
osThreadId osThreadGetId (void);
|
|
|
|
/// Terminate execution of a thread and remove it from Active Threads.
|
|
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS.
|
|
osStatus osThreadTerminate (osThreadId thread_id);
|
|
|
|
/// Pass control to next thread that is in state \b READY.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS.
|
|
osStatus osThreadYield (void);
|
|
|
|
/// Change priority of an active thread.
|
|
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
|
|
/// \param[in] priority new priority value for the thread function.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS.
|
|
osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority);
|
|
|
|
/// Get current priority of an active thread.
|
|
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
|
|
/// \return current priority value of the thread function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS.
|
|
osPriority osThreadGetPriority (osThreadId thread_id);
|
|
|
|
|
|
// ==== Generic Wait Functions ====
|
|
|
|
/// Wait for Timeout (Time Delay).
|
|
/// \param[in] millisec time delay value
|
|
/// \return status code that indicates the execution status of the function.
|
|
osStatus osDelay (uint32_t millisec);
|
|
|
|
#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available
|
|
|
|
/// Wait for Signal, Message, Mail, or Timeout.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out
|
|
/// \return event that contains signal, message, or mail information or error code.
|
|
/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS.
|
|
osEvent osWait (uint32_t millisec);
|
|
|
|
#endif // Generic Wait available
|
|
|
|
|
|
// ==== Timer Management Functions ====
|
|
/// Define a Timer object.
|
|
/// \param name name of the timer object.
|
|
/// \param function name of the timer call back function.
|
|
/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osTimerDef(name, function) \
|
|
extern const osTimerDef_t os_timer_def_##name; \
|
|
extern struct os_timer_custom os_timer_custome_##name
|
|
#else // define the object
|
|
#define osTimerDef(name, function) \
|
|
struct os_timer_custom os_timer_custom_##name; \
|
|
const osTimerDef_t os_timer_def_##name = \
|
|
{ (function), (&os_timer_custom_##name) }
|
|
#endif
|
|
|
|
/// Access a Timer definition.
|
|
/// \param name name of the timer object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osTimer(name) \
|
|
&os_timer_def_##name
|
|
|
|
/// Create a timer.
|
|
/// \param[in] timer_def timer object referenced with \ref osTimer.
|
|
/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior.
|
|
/// \param[in] argument argument to the timer call back function.
|
|
/// \return timer ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS.
|
|
osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument);
|
|
|
|
/// Start or restart a timer.
|
|
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
|
|
/// \param[in] millisec time delay value of the timer.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS.
|
|
osStatus osTimerStart (osTimerId timer_id, uint32_t millisec);
|
|
|
|
/// Stop the timer.
|
|
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS.
|
|
osStatus osTimerStop (osTimerId timer_id);
|
|
|
|
/// Delete a timer that was created by \ref osTimerCreate.
|
|
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS.
|
|
osStatus osTimerDelete (osTimerId timer_id);
|
|
|
|
|
|
// ==== Signal Management ====
|
|
|
|
/// Set the specified Signal Flags of an active thread.
|
|
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
|
|
/// \param[in] signals specifies the signal flags of the thread that should be set.
|
|
/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS.
|
|
int32_t osSignalSet (osThreadId thread_id, int32_t signals);
|
|
|
|
/// Clear the specified Signal Flags of an active thread.
|
|
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
|
|
/// \param[in] signals specifies the signal flags of the thread that shall be cleared.
|
|
/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS.
|
|
int32_t osSignalClear (osThreadId thread_id, int32_t signals);
|
|
|
|
/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread.
|
|
/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out.
|
|
/// \return event flag information or error code.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS.
|
|
osEvent osSignalWait (int32_t signals, uint32_t millisec);
|
|
|
|
|
|
// ==== Mutex Management ====
|
|
|
|
/// Define a Mutex.
|
|
/// \param name name of the mutex object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osMutexDef(name) \
|
|
extern const osMutexDef_t os_mutex_def_##name
|
|
#else // define the object
|
|
#define osMutexDef(name) \
|
|
const osMutexDef_t os_mutex_def_##name = { 0 }
|
|
#endif
|
|
|
|
/// Access a Mutex definition.
|
|
/// \param name name of the mutex object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osMutex(name) \
|
|
&os_mutex_def_##name
|
|
|
|
/// Create and Initialize a Mutex object.
|
|
/// \param[in] mutex_def mutex definition referenced with \ref osMutex.
|
|
/// \return mutex ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS.
|
|
osMutexId osMutexCreate (const osMutexDef_t *mutex_def);
|
|
|
|
/// Wait until a Mutex becomes available.
|
|
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec);
|
|
|
|
/// Release a Mutex that was obtained by \ref osMutexWait.
|
|
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMutexRelease (osMutexId mutex_id);
|
|
|
|
/// Delete a Mutex that was created by \ref osMutexCreate.
|
|
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMutexDelete (osMutexId mutex_id);
|
|
|
|
|
|
// ==== Semaphore Management Functions ====
|
|
|
|
#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available
|
|
|
|
/// Define a Semaphore object.
|
|
/// \param name name of the semaphore object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osSemaphoreDef(name) \
|
|
extern const osSemaphoreDef_t os_semaphore_def_##name
|
|
#else // define the object
|
|
#define osSemaphoreDef(name) \
|
|
const osSemaphoreDef_t os_semaphore_def_##name = { 0 }
|
|
#endif
|
|
|
|
/// Access a Semaphore definition.
|
|
/// \param name name of the semaphore object.
|
|
/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osSemaphore(name) \
|
|
&os_semaphore_def_##name
|
|
|
|
/// Create and Initialize a Semaphore object used for managing resources.
|
|
/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore.
|
|
/// \param[in] count number of available resources.
|
|
/// \return semaphore ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS.
|
|
osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count);
|
|
|
|
/// Wait until a Semaphore token becomes available.
|
|
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out.
|
|
/// \return number of available tokens, or -1 in case of incorrect parameters.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS.
|
|
int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec);
|
|
|
|
/// Release a Semaphore token.
|
|
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS.
|
|
osStatus osSemaphoreRelease (osSemaphoreId semaphore_id);
|
|
|
|
/// Delete a Semaphore that was created by \ref osSemaphoreCreate.
|
|
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS.
|
|
osStatus osSemaphoreDelete (osSemaphoreId semaphore_id);
|
|
|
|
#endif // Semaphore available
|
|
|
|
|
|
// ==== Memory Pool Management Functions ====
|
|
|
|
#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available
|
|
|
|
/// \brief Define a Memory Pool.
|
|
/// \param name name of the memory pool.
|
|
/// \param no maximum number of blocks (objects) in the memory pool.
|
|
/// \param type data type of a single block (object).
|
|
/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osPoolDef(name, no, type) \
|
|
extern const osPoolDef_t os_pool_def_##name
|
|
#else // define the object
|
|
#define osPoolDef(name, no, type) \
|
|
const osPoolDef_t os_pool_def_##name = \
|
|
{ (no), sizeof(type), NULL }
|
|
#endif
|
|
|
|
/// \brief Access a Memory Pool definition.
|
|
/// \param name name of the memory pool
|
|
/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osPool(name) \
|
|
&os_pool_def_##name
|
|
|
|
/// Create and Initialize a memory pool.
|
|
/// \param[in] pool_def memory pool definition referenced with \ref osPool.
|
|
/// \return memory pool ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS.
|
|
osPoolId osPoolCreate (const osPoolDef_t *pool_def);
|
|
|
|
/// Allocate a memory block from a memory pool.
|
|
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
|
|
/// \return address of the allocated memory block or NULL in case of no memory available.
|
|
/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS.
|
|
void *osPoolAlloc (osPoolId pool_id);
|
|
|
|
/// Allocate a memory block from a memory pool and set memory block to zero.
|
|
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
|
|
/// \return address of the allocated memory block or NULL in case of no memory available.
|
|
/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS.
|
|
void *osPoolCAlloc (osPoolId pool_id);
|
|
|
|
/// Return an allocated memory block back to a specific memory pool.
|
|
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
|
|
/// \param[in] block address of the allocated memory block that is returned to the memory pool.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS.
|
|
osStatus osPoolFree (osPoolId pool_id, void *block);
|
|
|
|
#endif // Memory Pool Management available
|
|
|
|
|
|
// ==== Message Queue Management Functions ====
|
|
|
|
#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available
|
|
|
|
/// \brief Create a Message Queue Definition.
|
|
/// \param name name of the queue.
|
|
/// \param queue_sz maximum number of messages in the queue.
|
|
/// \param type data type of a single message element (for debugger).
|
|
/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osMessageQDef(name, queue_sz, type) \
|
|
extern const osMessageQDef_t os_messageQ_def_##name
|
|
#else // define the object
|
|
#define osMessageQDef(name, queue_sz, type) \
|
|
const osMessageQDef_t os_messageQ_def_##name = \
|
|
{ (queue_sz), sizeof (type) }
|
|
#endif
|
|
|
|
/// \brief Access a Message Queue Definition.
|
|
/// \param name name of the queue
|
|
/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osMessageQ(name) \
|
|
&os_messageQ_def_##name
|
|
|
|
/// Create and Initialize a Message Queue.
|
|
/// \param[in] queue_def queue definition referenced with \ref osMessageQ.
|
|
/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
|
|
/// \return message queue ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS.
|
|
osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id);
|
|
|
|
/// Put a Message to a Queue.
|
|
/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate.
|
|
/// \param[in] info message information.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec);
|
|
|
|
/// Get a Message or Wait for a Message from a Queue.
|
|
/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out.
|
|
/// \return event information that includes status code.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS.
|
|
osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec);
|
|
|
|
#endif // Message Queues available
|
|
|
|
|
|
// ==== Mail Queue Management Functions ====
|
|
|
|
#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available
|
|
|
|
/// \brief Create a Mail Queue Definition.
|
|
/// \param name name of the queue
|
|
/// \param queue_sz maximum number of messages in queue
|
|
/// \param type data type of a single message element
|
|
/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#if defined (osObjectsExternal) // object is external
|
|
#define osMailQDef(name, queue_sz, type) \
|
|
extern struct os_mailQ_cb *os_mailQ_cb_##name; \
|
|
extern const osMailQDef_t os_mailQ_def_##name;
|
|
#else // define the object
|
|
#define osMailQDef(name, queue_sz, type) \
|
|
struct os_mailQ_cb *os_mailQ_cb_##name; \
|
|
const osMailQDef_t os_mailQ_def_##name = \
|
|
{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) }
|
|
#endif
|
|
|
|
/// \brief Access a Mail Queue Definition.
|
|
/// \param name name of the queue
|
|
/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the
|
|
/// macro body is implementation specific in every CMSIS-RTOS.
|
|
#define osMailQ(name) \
|
|
&os_mailQ_def_##name
|
|
|
|
/// Create and Initialize mail queue.
|
|
/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ
|
|
/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
|
|
/// \return mail queue ID for reference by other functions or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS.
|
|
osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id);
|
|
|
|
/// Allocate a memory block from a mail.
|
|
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out
|
|
/// \return pointer to memory block that can be filled with mail or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS.
|
|
void *osMailAlloc (osMailQId queue_id, uint32_t millisec);
|
|
|
|
/// Allocate a memory block from a mail and set memory block to zero.
|
|
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out
|
|
/// \return pointer to memory block that can be filled with mail or NULL in case of error.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS.
|
|
void *osMailCAlloc (osMailQId queue_id, uint32_t millisec);
|
|
|
|
/// Put a mail to a queue.
|
|
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
|
|
/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMailPut (osMailQId queue_id, void *mail);
|
|
|
|
/// Get a mail from a queue.
|
|
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
|
|
/// \param[in] millisec timeout value or 0 in case of no time-out
|
|
/// \return event that contains mail information or error code.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS.
|
|
osEvent osMailGet (osMailQId queue_id, uint32_t millisec);
|
|
|
|
/// Free a memory block from a mail.
|
|
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
|
|
/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet.
|
|
/// \return status code that indicates the execution status of the function.
|
|
/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS.
|
|
osStatus osMailFree (osMailQId queue_id, void *mail);
|
|
|
|
#endif // Mail Queues available
|
|
|
|
#define malloc(size) pvPortMalloc(size)
|
|
#define free(pbuf) vPortFree(pbuf)
|
|
extern void *calloc_freertos(size_t nelements, size_t elementSize);
|
|
#define calloc(nelements, elementSize) calloc_freertos(nelements, elementSize)
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // _CMSIS_OS_H
|