RTL8710_SDK_GCC_VERSION/component/common/mbed/hal/sleep_api.h
RtlduinoMan 1d3357d3b0 GCC SDK RTL8710 basic version (including the window platform cygwin installation and Ubuntu platform Linux Installation routines),
including cross compilation of the installation, compile, link, run, debug, and so on.
SDK implementation of the function:
1, WiFi connection settings (including AP mode and STA mode).
2, peripheral resource control (including GPIO, SPI, UART, IIC, etc.).
3, the user uses the sample method.
2016-09-08 20:52:17 +08:00

64 lines
2.2 KiB
C

/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_SLEEP_API_H
#define MBED_SLEEP_API_H
#include "device.h"
#if DEVICE_SLEEP
#ifdef __cplusplus
extern "C" {
#endif
/** Send the microcontroller to sleep
*
* The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
* system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
* dynamic power used by the processor, memory systems and buses. The processor, peripheral and
* memory state are maintained, and the peripherals continue to work and can generate interrupts.
*
* The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
*
* @note
* The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
* Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
* able to access the LocalFileSystem
*/
void sleep(void);
/** Send the microcontroller to deep sleep
*
* This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
* has the same sleep features as sleep plus it powers down peripherals and clocks. All state
* is still maintained.
*
* The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
*
* @note
* The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
* Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
* able to access the LocalFileSystem
*/
void deepsleep(void);
#ifdef __cplusplus
}
#endif
#endif
#endif