j3d1/RTL8710AF_GCC
1
0
Fork 0
mirror of https://github.com/rtlduino/RTL8710AF_GCC.git synced 2024-11-23 01:34:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
RTL8710AF_GCC/component/soc/realtek/8195a/fwlib/rtl8195a/rtl8195a_uart.h
RtlduinoMan 9c0c9edf61 rtlduino rtl8710af gcc base version
2016-09-12 17:16:56 +08:00

622 lines
17 KiB
C
Raw Blame History

/*
* Routines to access hardware
*
* Copyright (c) 2013 Realtek Semiconductor Corp.
*
* This module is a confidential and proprietary property of RealTek and
* possession or use of this module requires written permission of RealTek.
*/
#ifndef _RTL8195A_UART_H_
#define _RTL8195A_UART_H_
#define MAX_UART_INDEX 2
#define RUART_DLL_OFF 0x00
#define RUART_DLM_OFF 0x04 //RW, DLAB = 1
#define RUART_INTERRUPT_EN_REG_OFF 0x04
#define RUART_IER_ERBI 0x01 //BIT0, Enable Received Data Available Interrupt (rx trigger)
#define RUART_IER_ETBEI (1<<1) //BIT1, Enable Transmitter FIFO Empty Interrupt (tx fifo empty)
#define RUART_IER_ELSI (1<<2) //BIT2, Enable Receiver Line Status Interrupt (receiver line status)
#define RUART_IER_EDSSI (1<<3) //BIT3, Enable Modem Status Interrupt (modem status transition)
#define RUART_INT_ID_REG_OFF 0x08 //[R]
#define RUART_IIR_INT_PEND 0x01
#define RUART_IIR_INT_ID (0x07<<1) //011(3), 010(2), 110(6), 001(1), 000(0)
#define RUART_FIFO_CTL_REG_OFF 0x08 //[W]
#define RUART_FIFO_CTL_REG_FIFO_ENABLE 0x01 //BIT0
#define RUART_FIFO_CTL_REG_CLEAR_RXFIFO (1<<1) //BIT1, 0x02, Write 1 clear
#define RUART_FIFO_CTL_REG_CLEAR_TXFIFO (1<<2) //BIT2, 0x04, Write 1 clear
#define RUART_FIFO_CTL_REG_DMA_ENABLE 0x08 //BIT3
#define FIFO_CTL_DEFAULT_WITH_FIFO_DMA 0xC9
#define FIFO_CTL_DEFAULT_WITH_FIFO 0xC1
#define RUART_MODEM_CTL_REG_OFF 0x10
#define RUART_MCR_RTS BIT1
#define RUART_MCL_AUTOFLOW_ENABLE (1<<5) //BIT5, 0x20
#define RUART_LINE_CTL_REG_OFF 0x0C
#define RUART_LINE_CTL_REG_DLAB_ENABLE (1<<7) //BIT7, 0x80
#define RUART_LINE_STATUS_REG_OFF 0x14
#define RUART_LINE_STATUS_REG_DR 0x01 //BIT0, Data Ready indicator
#define RUART_LINE_STATUS_ERR_OVERRUN (1<<1) //BIT1, Over Run
#define RUART_LINE_STATUS_ERR_PARITY (1<<2) //BIT2, Parity error
#define RUART_LINE_STATUS_ERR_FRAMING (1<<3) //BIT3, Framing error
#define RUART_LINE_STATUS_ERR_BREAK (1<<4) //BIT4, Break interrupt error
#define RUART_LINE_STATUS_REG_THRE (1<<5) //BIT5, 0x20, Transmit Holding Register Empty Interrupt enable
#define RUART_LINE_STATUS_REG_TEMT (1<<6) //BIT6, 0x40, Transmitter Empty indicator(bit)
#define RUART_LINE_STATUS_ERR_RXFIFO (1<<7) //BIT7, RX FIFO error
#define RUART_LINE_STATUS_ERR (RUART_LINE_STATUS_ERR_OVERRUN|RUART_LINE_STATUS_ERR_PARITY| \
RUART_LINE_STATUS_ERR_FRAMING|RUART_LINE_STATUS_ERR_BREAK| \
RUART_LINE_STATUS_ERR_RXFIFO) //Line status error
#define RUART_MODEM_STATUS_REG_OFF 0x18 //Modem Status Register
#define RUART_SCRATCH_PAD_REG_OFF 0x1C //Scratch Pad Register
#define RUART_SP_REG_RXBREAK_INT_STATUS (1<<7) //BIT7, 0x80, Write 1 clear
#define RUART_SP_REG_DBG_SEL (0x0F<<8) //[11:8], Debug port selection
#define RUART_SP_REG_XFACTOR_ADJ (0x7FF<<16) //[26:16]
#define RUART_STS_REG_OFF 0x20
#define RUART_STS_REG_RESET_RCV (1<<3) //BIT3, 0x08, Reset Uart Receiver
#define RUART_STS_REG_XFACTOR 0xF<<4
#define RUART_REV_BUF_REG_OFF 0x24 //Receiver Buffer Register
#define RUART_TRAN_HOLD_REG_OFF 0x24 //Transmitter Holding Register
#define RUART_MISC_CTL_REG_OFF 0x28
#define RUART_TXDMA_BURSTSIZE_MASK 0xF8 //7:3
#define RUART_RXDMA_BURSTSIZE_MASK 0x1F00 //12:8
#define RUART_DEBUG_REG_OFF 0x3C
// RUART_LINE_CTL_REG_OFF (0x0C)
#define BIT_SHIFT_LCR_WLS 0 // word length select: 0: 7 bits, 1: 8bits
#define BIT_MASK_LCR_WLS_8BITS 0x1
#define BIT_LCR_WLS(x)(((x) & BIT_MASK_LCR_WLS_8BITS) << BIT_SHIFT_LCR_WLS)
#define BIT_CLR_LCR_WLS (~(BIT_MASK_LCR_WLS_8BITS << BIT_SHIFT_LCR_WLS))
#define BIT_SHIFT_LCR_STB 2 // Stop bit select: 0: no stop bit, 1: 1 stop bit
#define BIT_MASK_LCR_STB_EN 0x1
#define BIT_LCR_STB_EN(x)(((x) & BIT_MASK_LCR_STB_EN) << BIT_SHIFT_LCR_STB)
#define BIT_INVC_LCR_STB_EN (~(BIT_MASK_LCR_STB_EN << BIT_SHIFT_LCR_STB))
#define BIT_SHIFT_LCR_PARITY_EN 3
#define BIT_MASK_LCR_PARITY_EN 0x1
#define BIT_LCR_PARITY_EN(x)(((x) & BIT_MASK_LCR_PARITY_EN) << BIT_SHIFT_LCR_PARITY_EN)
#define BIT_INVC_LCR_PARITY_EN (~(BIT_MASK_LCR_PARITY_EN << BIT_SHIFT_LCR_PARITY_EN))
#define BIT_SHIFT_LCR_PARITY_TYPE 4
#define BIT_MASK_LCR_PARITY_TYPE 0x1
#define BIT_LCR_PARITY_TYPE(x)(((x) & BIT_MASK_LCR_PARITY_TYPE) << BIT_SHIFT_LCR_PARITY_TYPE)
#define BIT_INVC_LCR_PARITY_TYPE (~(BIT_MASK_LCR_PARITY_TYPE << BIT_SHIFT_LCR_PARITY_TYPE))
#define BIT_SHIFT_LCR_STICK_PARITY_EN 5
#define BIT_MASK_LCR_STICK_PARITY_EN 0x1
#define BIT_LCR_STICK_PARITY_EN(x)(((x) & BIT_MASK_LCR_STICK_PARITY_EN) << BIT_SHIFT_LCR_STICK_PARITY_EN)
#define BIT_INVC_LCR_STICK_PARITY_EN (~(BIT_MASK_LCR_STICK_PARITY_EN << BIT_SHIFT_LCR_STICK_PARITY_EN))
#define BIT_SHIFT_LCR_BREAK_CTRL 6
#define BIT_MASK_LCR_BREAK_CTRL 0x1
#define BIT_UART_LCR_BREAK_CTRL ((BIT_MASK_LCR_BREAK_CTRL) << BIT_SHIFT_LCR_BREAK_CTRL)
#define RUART_BAUD_RATE_2400 2400
#define RUART_BAUD_RATE_4800 4800
#define RUART_BAUD_RATE_9600 9600
#define RUART_BAUD_RATE_19200 19200
#define RUART_BAUD_RATE_38400 38400
#define RUART_BAUD_RATE_57600 57600
#define RUART_BAUD_RATE_115200 115200
#define RUART_BAUD_RATE_921600 921600
#define RUART_BAUD_RATE_1152000 1152000
#define HAL_RUART_READ32(UartIndex, addr) \
HAL_READ32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
#define HAL_RUART_WRITE32(UartIndex, addr, value) \
HAL_WRITE32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
#define HAL_RUART_READ16(UartIndex, addr) \
HAL_READ16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
#define HAL_RUART_WRITE16(UartIndex, addr, value) \
HAL_WRITE16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
#define HAL_RUART_READ8(UartIndex, addr) \
HAL_READ8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
#define HAL_RUART_WRITE8(UartIndex, addr, value) \
HAL_WRITE8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
#define UART_OVSR_POOL_MIN 1000
#define UART_OVSR_POOL_MAX 2090
#define DIVISOR_RESOLUTION 10
#define JITTER_LIMIT 100
#define UART_SCLK (200000000*5/12)
typedef struct _RUART_SPEED_SETTING_ {
u32 BaudRate;
u32 Ovsr;
u32 Div;
u32 Ovsr_adj;
#if defined(E_CUT_ROM_DOMAIN) || (!defined(CONFIG_RELEASE_BUILD_LIBRARIES))
u8 Ovsr_adj_max_bits; // 9: No parity, 10: with Parity
u8 Ovsr_adj_bits;
u16 *Ovsr_adj_map;
u32 max_err; // 10 ~ 100: 30
u32 Ovsr_min; // 10 ~ 20: 1000
u32 Ovsr_max; // 10 ~ 20: 2000
u32 divisor_resolution; // 1 ~ 20: 10
u32 jitter_lim; // 50 ~ 100: 100
u32 sclk; // 83.33333 MHz
#endif
}RUART_SPEED_SETTING, *PRUART_SPEED_SETTING;
typedef enum _UART_RXFIFO_TRIGGER_LEVEL_ {
OneByte = 0x00,
FourBytes = 0x01,
EightBytes = 0x10,
FourteenBytes = 0x11
}UART_RXFIFO_TRIGGER_LEVEL, *PUART_RXFIFO_TRIGGER_LEVEL;
typedef enum _RUART0_PINMUX_SELECT_ {
RUART0_MUX_TO_GPIOC = S0,
RUART0_MUX_TO_GPIOE = S1,
RUART0_MUX_TO_GPIOA = S2
}RUART0_PINMUX_SELECT, *PRUART0_PINMUX_SELECT;
typedef enum _RUART1_PINMUX_SELECT_ {
RUART1_MUX_TO_GPIOD = S0,
RUART1_MUX_TO_GPIOE = S1,
RUART1_MUX_TO_GPIOB = S2
}RUART1_PINMUX_SELECT, *PRUART1_PINMUX_SELECT;
typedef enum _RUART2_PINMUX_SELECT_ {
RUART2_MUX_TO_GPIOA = S0,
RUART2_MUX_TO_GPIOC = S1,
RUART2_MUX_TO_GPIOD = S2
}RUART2_PINMUX_SELECT, *PRUART2_PINMUX_SELECT;
typedef enum _RUART_FLOW_CONTROL_ {
AUTOFLOW_DISABLE = 0,
AUTOFLOW_ENABLE = 1
}RUART_FLOW_CONTROL, *PRUART_FLOW_CONTROL;
typedef enum _RUART_WORD_LEN_SEL_ {
RUART_WLS_7BITS = 0,
RUART_WLS_8BITS = 1
}RUART_WORD_LEN_SEL, *PRUART_WORD_LEN_SEL;
typedef enum _RUART_STOP_BITS_ {
RUART_STOP_BIT_1 = 0,
RUART_STOP_BIT_2 = 1
}RUART_STOP_BITS, *PRUART_STOP_BITS;
typedef enum _RUART_PARITY_CONTROL_ {
RUART_PARITY_DISABLE = 0,
RUART_PARITY_ENABLE = 1
}RUART_PARITY_CONTROL, *PRUART_PARITY_CONTROL;
typedef enum _RUART_PARITY_TYPE_ {
RUART_ODD_PARITY = 0,
RUART_EVEN_PARITY = 1
}RUART_PARITY_TYPE, *PRUART_PARITY_TYPE;
typedef enum _RUART_STICK_PARITY_CONTROL_ {
RUART_STICK_PARITY_DISABLE = 0,
RUART_STICK_PARITY_ENABLE = 1
}RUART_STICK_PARITY_CONTROL, *PRUART_STICK_PARITY_CONTROL;
typedef enum _UART_INT_ID_ {
ModemStatus = 0,
TxFifoEmpty = 1,
ReceiverDataAvailable = 2,
ReceivLineStatus = 3,
TimeoutIndication = 6
}UART_INT_ID, *PUART_INT_ID;
typedef enum _HAL_UART_State_
{
HAL_UART_STATE_NULL = 0x00, // UART hardware not been initial yet
HAL_UART_STATE_READY = 0x10, // UART is initialed, ready to use
HAL_UART_STATE_BUSY = 0x20, // UART hardware is busy on configuration
HAL_UART_STATE_BUSY_TX = 0x21, // UART is buzy on TX
HAL_UART_STATE_BUSY_RX = 0x22, // UART is busy on RX
HAL_UART_STATE_BUSY_TX_RX = 0x23, // UART is busy on TX an RX
HAL_UART_STATE_TIMEOUT = 0x30, // Transfer timeout
HAL_UART_STATE_ERROR = 0x40 // UART Error
}HAL_UART_State, *PHAL_UART_State;
typedef enum _HAL_UART_Status_
{
HAL_UART_STATUS_OK = 0x00, // Transfer OK
HAL_UART_STATUS_TIMEOUT = 0x01, // Transfer Timeout
HAL_UART_STATUS_ERR_OVERRUN = 0x02, // RX Over run
HAL_UART_STATUS_ERR_PARITY = 0x04, // Parity error
HAL_UART_STATUS_ERR_FRAM = 0x08, // Framing Error
HAL_UART_STATUS_ERR_BREAK = 0x10, // Break Interrupt
HAL_UART_STATUS_ERR_PARA = 0x20, // Parameter error
HAL_UART_STATUS_ERR_RXFIFO = 0x80, // RX FIFO error
}HAL_UART_Status, *PHAL_UART_Status;
u32
HalRuartGetDebugValueRtl8195a(
IN VOID* Data,
IN u32 DbgSel
);
#if 0
u32
FindElementIndex(
u32 Element,
u32* Array
);
#endif
VOID
RuartResetRxFifoRtl8195a(
IN u8 UartIndex
);
#if 0
VOID
RuartBusDomainEnableRtl8195a(
IN u8 UartIndex
);
#endif
HAL_Status
HalRuartResetRxFifoRtl8195a(
IN VOID *Data
);
HAL_Status
HalRuartInitRtl8195a(
IN VOID *Data
);
VOID
HalRuartDeInitRtl8195a(
IN VOID *Data ///< RUART Adapter
);
HAL_Status
HalRuartPutCRtl8195a(
IN VOID *Data,
IN u8 TxData
);
u32
HalRuartSendRtl8195a(
IN VOID *Data,
IN u8 *pTxData,
IN u32 Length,
IN u32 Timeout
);
HAL_Status
HalRuartIntSendRtl8195a(
IN VOID *Data, // PHAL_RUART_ADAPTER
IN u8 *pTxData, // the Buffer to be send
IN u32 Length // the length of data to be send
);
HAL_Status
HalRuartDmaSendRtl8195a(
IN VOID *Data, // PHAL_RUART_ADAPTER
IN u8 *pTxData, // the Buffer to be send
IN u32 Length // the length of data to be send
);
HAL_Status
HalRuartStopSendRtl8195a(
IN VOID *Data // PHAL_RUART_ADAPTER
);
HAL_Status
HalRuartGetCRtl8195a(
IN VOID *Data,
OUT u8 *pRxByte
);
u32
HalRuartRecvRtl8195a(
IN VOID *Data,
IN u8 *pRxData,
IN u32 Length,
IN u32 Timeout
);
HAL_Status
HalRuartIntRecvRtl8195a(
IN VOID *Data, ///< RUART Adapter
IN u8 *pRxData, ///< Rx buffer
IN u32 Length // buffer length
);
HAL_Status
HalRuartDmaRecvRtl8195a(
IN VOID *Data, ///< RUART Adapter
IN u8 *pRxData, ///< Rx buffer
IN u32 Length // buffer length
);
HAL_Status
HalRuartStopRecvRtl8195a(
IN VOID *Data // PHAL_RUART_ADAPTER
);
u8
HalRuartGetIMRRtl8195a(
IN VOID *Data
);
_LONG_CALL_ROM_ VOID
HalRuartSetIMRRtl8195a(
IN VOID *Data
);
VOID
HalRuartDmaInitRtl8195a(
IN VOID *Data
);
VOID
HalRuartRTSCtrlRtl8195a(
IN VOID *Data,
IN BOOLEAN RtsCtrl
);
VOID
HalRuartRegIrqRtl8195a(
IN VOID *Data
);
VOID
HalRuartIntEnableRtl8195a(
IN VOID *Data
);
VOID
HalRuartIntDisableRtl8195a(
IN VOID *Data
);
VOID
HalRuartAdapterLoadDefRtl8195a(
IN VOID *pAdp,
IN u8 UartIdx
);
VOID
HalRuartTxGdmaLoadDefRtl8195a(
IN VOID *pAdp,
IN VOID *pCfg
);
VOID
HalRuartRxGdmaLoadDefRtl8195a(
IN VOID *pAdp,
IN VOID *pCfg
);
_LONG_CALL_ HAL_Status HalRuartIntSendRtl8195aV02(
IN VOID *Data, // PHAL_RUART_ADAPTER
IN u8 *pTxData, // the Buffer to be send
IN u32 Length // the length of data to be send
);
_LONG_CALL_ HAL_Status
HalRuartIntRecvRtl8195aV02(
IN VOID *Data, ///< RUART Adapter
IN u8 *pRxData, ///< Rx buffer
IN u32 Length // buffer length
);
_LONG_CALL_ s32
FindElementIndex_v02(
u32 Element, ///< RUART Baudrate
u32* Array, ///< Pre-defined Baudrate Array
u32 ElementNo
);
_LONG_CALL_ HAL_Status HalRuartInitRtl8195a_v02(IN VOID *Data);
// New added function 2015/04/20
HAL_Status
HalRuartResetTxFifoRtl8195a(
IN VOID *Data ///< RUART Adapter
);
HAL_Status
HalRuartResetRxFifoRtl8195a_Patch(
IN VOID *Data ///< RUART Adapter
);
HAL_Status
HalRuartResetTRxFifoRtl8195a(
IN VOID *Data ///< RUART Adapter
);
HAL_Status
HalRuartSetBaudRateRtl8195a(
IN VOID *Data
);
HAL_Status
HalRuartEnableRtl8195a(
IN VOID *Data
);
HAL_Status
HalRuartDisableRtl8195a(
IN VOID *Data
);
HAL_Status
HalRuartFlowCtrlRtl8195a(
IN VOID *Data
);
u32
_UartTxDmaIrqHandle_Patch(
IN VOID *Data
);
u32
_UartRxDmaIrqHandle_Patch(
IN VOID *Data
);
HAL_Status
HalRuartDmaSendRtl8195a_Patch(
IN VOID *Data,
IN u8 *pTxData,
IN u32 Length
);
HAL_Status
HalRuartDmaRecvRtl8195a_Patch(
IN VOID *Data,
IN u8 *pRxData,
IN u32 Length
);
HAL_Status
HalRuartMultiBlkDmaSendRtl8195a(
IN VOID *Data,
IN u8 *pTxData,
IN u32 Length
);
HAL_Status
HalRuartMultiBlkDmaRecvRtl8195a(
IN VOID *Data,
IN u8 *pRxData,
IN u32 Length
);
HAL_Status
RuartIsTimeout (
u32 StartCount,
u32 TimeoutCnt
);
HAL_Status
HalRuartStopRecvRtl8195a_Patch(
IN VOID *Data
);
HAL_Status
HalRuartStopSendRtl8195a_Patch(
IN VOID *Data
);
VOID
HalRuartEnterCriticalRtl8195a(
IN VOID *Data
);
VOID
HalRuartExitCriticalRtl8195a(
IN VOID *Data
);
#if CONFIG_CHIP_E_CUT
_LONG_CALL_ HAL_Status
HalRuartResetTxFifoRtl8195a_V04(
IN VOID *Data ///< RUART Adapter
);
_LONG_CALL_ HAL_Status
HalRuartResetRxFifoRtl8195a_V04(
IN VOID *Data ///< RUART Adapter
);
_LONG_CALL_ HAL_Status
HalRuartResetTRxFifoRtl8195a_V04(
IN VOID *Data ///< RUART Adapter
);
_LONG_CALL_ HAL_Status
HalRuartSetBaudRateRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ HAL_Status
HalRuartInitRtl8195a_V04(
IN VOID *Data ///< RUART Adapter
);
_LONG_CALL_ HAL_Status
HalRuartEnableRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ HAL_Status
HalRuartDisableRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ HAL_Status
HalRuartFlowCtrlRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ u32
_UartTxDmaIrqHandle_V04(
IN VOID *Data
);
_LONG_CALL_ u32
_UartRxDmaIrqHandle_V04(
IN VOID *Data
);
_LONG_CALL_ HAL_Status
HalRuartDmaSendRtl8195a_V04(
IN VOID *Data,
IN u8 *pTxData,
IN u32 Length
);
_LONG_CALL_ HAL_Status
HalRuartDmaRecvRtl8195a_V04(
IN VOID *Data,
IN u8 *pRxData,
IN u32 Length
);
_LONG_CALL_ HAL_Status
HalRuartMultiBlkDmaSendRtl8195a_V04(
IN VOID *Data,
IN u8 *pTxData,
IN u32 Length
);
_LONG_CALL_ HAL_Status
HalRuartMultiBlkDmaRecvRtl8195a_V04(
IN VOID *Data,
IN u8 *pRxData,
IN u32 Length
);
_LONG_CALL_ HAL_Status
HalRuartStopRecvRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ HAL_Status
HalRuartStopSendRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ VOID
HalRuartEnterCriticalRtl8195a_V04(
IN VOID *Data
);
_LONG_CALL_ VOID
HalRuartExitCriticalRtl8195a_V04(
IN VOID *Data
);
#endif // #if CONFIG_CHIP_E_CUT
#endif
Reference in a new issue View git blame Copy permalink