mirror of
https://github.com/pvvx/RTL00_WEB.git
synced 2024-11-28 17:20:36 +00:00
21 lines
823 B
Text
21 lines
823 B
Text
Example Description
|
|
|
|
This example describes how to implement high/low level trigger on 1 gpio pin.
|
|
|
|
Pin name PC_4 and PC_5 map to GPIOC_4 and GPIOC_5:
|
|
Connect PC_4 and PC_5
|
|
- PC_4 as gpio input high/low level trigger.
|
|
- PC_5 as gpio output
|
|
|
|
In this example, PC_5 is signal source that change level to high and low periodically.
|
|
|
|
PC_4 setup to listen low level events in initial.
|
|
When PC_4 catch low level events, it disable the irq to avoid receiving duplicate events.
|
|
(NOTE: the level events will keep invoked if level keeps in same level)
|
|
|
|
Then PC_4 is configured to listen high level events and enable irq.
|
|
As PC_4 catches high level events, it changes back to listen low level events.
|
|
|
|
Thus PC_4 can handle both high/low level events.
|
|
|
|
In this example, you will see log that prints high/low level event periodically.
|