first commit

project/inc/platform_opts.h

@@ -0,0 +1,172 @@
+/**
+ ******************************************************************************
+ *This file contains general configurations for ameba platform
+ ******************************************************************************
+*/
+
+#ifndef __PLATFORM_OPTS_H__
+#define __PLATFORM_OPTS_H__
+
+/*For MP mode setting*/
+#define SUPPORT_MP_MODE			0
+
+/**
+ * For AT cmd Log service configurations
+ */
+#define SUPPORT_LOG_SERVICE	0
+#if SUPPORT_LOG_SERVICE
+#define LOG_SERVICE_BUFLEN     100 //can't larger than UART_LOG_CMD_BUFLEN(127)
+#define CONFIG_LOG_HISTORY	0
+#if CONFIG_LOG_HISTORY
+#define LOG_HISTORY_LEN    5
+#endif
+#define SUPPORT_INTERACTIVE_MODE 0 //on/off wifi_interactive_mode
+#define CONFIG_LOG_SERVICE_LOCK 0
+#endif
+
+/**
+ * For interactive mode configurations, depends on log service
+ */
+#if SUPPORT_INTERACTIVE_MODE
+#define CONFIG_INTERACTIVE_MODE		1
+#define CONFIG_INTERACTIVE_EXT		0
+#else
+#define CONFIG_INTERACTIVE_MODE		0
+#define CONFIG_INTERACTIVE_EXT		0
+#endif
+
+/**
+ * For FreeRTOS tickless configurations
+ */
+#define FREERTOS_PMU_TICKLESS_PLL_RESERVED   0   // In sleep mode, 0: close PLL clock, 1: reserve PLL clock
+#define FREERTOS_PMU_TICKLESS_SUSPEND_SDRAM  1   // In sleep mode, 1: suspend SDRAM, 0: no act
+
+/******************************************************************************/
+
+/**
+* For common flash usage  
+*/
+#define AP_SETTING_SECTOR		0x000FE000
+#define UART_SETTING_SECTOR		0x000FC000
+#define FAST_RECONNECT_DATA 	(0x80000 - 0x1000)
+
+/**
+ * For Wlan configurations
+ */
+
+#define CONFIG_WLAN			1
+#if CONFIG_WLAN
+#define CONFIG_LWIP_LAYER	1
+#define CONFIG_AT_USR			1	// add pvxx
+//#define CONFIG_AT_LWIP 		1	// add pvxx
+//#define CONFIG_AT_SYS  		1	// add pvxx
+//#define CONFIG_AT_WIFI 		1	// add pvxx
+#define CONFIG_INIT_NET		1 	// init lwip layer when start up
+#define CONFIG_WIFI_IND_USE_THREAD	0	// wifi indicate worker thread
+
+//on/off relative commands in log service
+#define CONFIG_SSL_CLIENT	0
+#define CONFIG_WEBSERVER	0
+#define CONFIG_OTA_UPDATE	0
+#define CONFIG_BSD_TCP		0	//NOTE : Enable CONFIG_BSD_TCP will increase about 11KB code size
+#define CONFIG_AIRKISS		0	//on or off tencent airkiss
+#define CONFIG_UART_SOCKET	0 	// Set: CONFIG_UART_EN, CONFIG_UART_SOCKET
+#define CONFIG_UART_XMODEM	0	//support uart xmodem upgrade or not
+#define CONFIG_TRANSPORT	0	//on or off the at command for transport socket
+
+/* For WPS and P2P */
+#define CONFIG_ENABLE_WPS		0
+#define CONFIG_ENABLE_P2P		0
+#if CONFIG_ENABLE_P2P
+#define CONFIG_ENABLE_WPS_AP		1
+#undef CONFIG_WIFI_IND_USE_THREAD
+#define CONFIG_WIFI_IND_USE_THREAD	1
+#endif
+#if (CONFIG_ENABLE_P2P && ((CONFIG_ENABLE_WPS_AP == 0) || (CONFIG_ENABLE_WPS == 0)))
+#error "If CONFIG_ENABLE_P2P, need to define CONFIG_ENABLE_WPS_AP 1" 
+#endif
+
+/* For Simple Link */
+#define CONFIG_INCLUDE_SIMPLE_CONFIG		0
+
+/*For wowlan service settings*/
+#define CONFIG_WOWLAN_SERVICE           	0
+
+#endif //end of #if CONFIG_WLAN
+/*******************************************************************************/
+
+/**
+ * For Ethernet configurations
+ */
+#define CONFIG_ETHERNET 	0
+#if CONFIG_ETHERNET
+
+#define CONFIG_LWIP_LAYER	1
+#define CONFIG_INIT_NET     1	//init lwip layer when start up
+
+//on/off relative commands in log service
+#define CONFIG_SSL_CLIENT	0
+#define CONFIG_BSD_TCP		0	//NOTE : Enable CONFIG_BSD_TCP will increase about 11KB code size
+
+#endif
+
+
+/**
+ * For iNIC configurations
+ */
+#ifdef CONFIG_INIC 				//this flag is defined in IAR project
+#define CONFIG_INIC_EN 		1	//enable iNIC mode
+#undef CONFIG_ENABLE_WPS
+#define CONFIG_ENABLE_WPS 	1
+#undef CONFIG_INCLUDE_SIMPLE_CONFIG
+#define CONFIG_INCLUDE_SIMPLE_CONFIG	1
+#undef CONFIG_WOWLAN_SERVICE
+#define CONFIG_WOWLAN_SERVICE 1
+#undef LOG_SERVICE_BUFLEN
+#define LOG_SERVICE_BUFLEN 	256
+#undef CONFIG_LWIP_LAYER
+#define CONFIG_LWIP_LAYER	0
+#undef CONFIG_OTA_UPDATE
+#define CONFIG_OTA_UPDATE 	0
+#undef CONFIG_EXAMPLE_WLAN_FAST_CONNECT
+#define CONFIG_EXAMPLE_WLAN_FAST_CONNECT 0
+#define CONFIG_INIC_SDIO_HCI	1 //for SDIO or USB iNIC
+#define CONFIG_INIC_USB_HCI		0
+#define CONFIG_INIC_CMD_RSP     1 //need to return msg to host
+#endif
+/******************End of iNIC configurations*******************/
+
+/* For UART Module AT command example */
+#define CONFIG_EXAMPLE_UART_ATCMD			0
+#if CONFIG_EXAMPLE_UART_ATCMD
+#undef FREERTOS_PMU_TICKLESS_PLL_RESERVED
+#define FREERTOS_PMU_TICKLESS_PLL_RESERVED  1
+#undef CONFIG_OTA_UPDATE
+#define CONFIG_OTA_UPDATE 	1
+#undef CONFIG_TRANSPORT
+#define CONFIG_TRANSPORT 	1
+#undef LOG_SERVICE_BUFLEN
+#define LOG_SERVICE_BUFLEN 1600
+#undef CONFIG_LOG_SERVICE_LOCK
+#define CONFIG_LOG_SERVICE_LOCK 1
+#else
+#define CONFIG_EXAMPLE_WLAN_FAST_CONNECT 0
+#endif
+
+//#define CONFIG_EXAMPLE_UART_ADAPTER 1
+//#define CONFIG_EXAMPLE_MDNS
+#define USE_FLASH_EEP 1
+#define CONFIG_WLAN_CONNECT_CB 1
+
+//#define CONFIG_FATFS_EN	1 // FatFs & SD
+#ifdef CONFIG_FATFS_EN
+// fatfs version
+#define FATFS_R_10C
+// fatfs disk interface
+#define FATFS_DISK_USB	0
+#define FATFS_DISK_SD 	1
+#undef CONFIG_SDIO_HOST_EN
+#define CONFIG_SDIO_HOST_EN   1
+#endif
+
+#endif //__PLATFORM_OPTS_H__