/* * Routines to access hardware * * Copyright (c) 2013 Realtek Semiconductor Corp. * * This module is a confidential and proprietary property of RealTek and * possession or use of this module requires written permission of RealTek. */ #ifndef _RTL8195A_SDIO_H_ #define _RTL8195A_SDIO_H_ #include "hal_api.h" #include "hal_util.h" #if defined(CONFIG_SDIO_BOOT_SIM) || defined(CONFIG_SDIO_BOOT_ROM) #define SDIO_BOOT_DRIVER 1 // is this SDIO driver works for booting #else #include "osdep_api.h" #define SDIO_BOOT_DRIVER 0 // is this SDIO driver works for booting #endif #if defined(__IAR_SYSTEMS_ICC__) //for IAR SDK #include "autoconf.h" #endif #ifndef CONFIG_INIC_EN #define CONFIG_INIC_EN 0 #endif #if CONFIG_INIC_EN #define CONFIG_INIC_SKB_TX 0 //use SKB for trx to improve the throughput #define CONFIG_INIC_SKB_RX 0 #endif #ifndef PRIORITIE_OFFSET //PRIORITIE_OFFSET in FreeRTOSConfig.h #define PRIORITIE_OFFSET 0 #endif #define SDIO_DEBUG 0 #define SDIO_MP_MODE 0 // if includes MP mode function #define SDIO_MAX_WAIT_RX_DMA 100 // Wait RX DMA done #define SDIO_RX_PKT_SIZE_OVER_16K 0 /* is support SDIO RX packet size > 16K. if true, a big packet will be transmited via multiple RX_BD */ #define SDIO_MAILBOX_SIZE 10 // the maximum number of message block can be stored in this mailbox #define SDIO_PERIODICAL_TIMER_INTERVAL 2000 // in ms, the interval of SDIO periodical timer #define SDIO_AVG_TP_WIN_SIZE 20 // the number of entry to log the byte count for every periodical timer statistic, to calculate throughput #define HAL_SDIO_READ32(addr) HAL_READ32(SDIO_DEVICE_REG_BASE, addr) #define HAL_SDIO_WRITE32(addr, value) HAL_WRITE32(SDIO_DEVICE_REG_BASE, addr, value) #define HAL_SDIO_READ16(addr) HAL_READ16(SDIO_DEVICE_REG_BASE, addr) #define HAL_SDIO_WRITE16(addr, value) HAL_WRITE16(SDIO_DEVICE_REG_BASE, addr, value) #define HAL_SDIO_READ8(addr) HAL_READ8(SDIO_DEVICE_REG_BASE, addr) #define HAL_SDIO_WRITE8(addr, value) HAL_WRITE8(SDIO_DEVICE_REG_BASE, addr, value) /***** Register Address *****/ #define REG_SPDIO_TXBD_ADDR 0xA0 // 4 Bytes #define REG_SPDIO_TXBD_SIZE 0xA4 // 4 Bytes #define REG_SPDIO_TXBD_WPTR 0xA8 // 2 Bytes #define REG_SPDIO_TXBD_RPTR 0xAC // 2 Bytes #define REG_SPDIO_RXBD_ADDR 0xB0 // 4 Bytes #define REG_SPDIO_RXBD_SIZE 0xB4 // 2 Bytes #define REG_SPDIO_RXBD_C2H_WPTR 0xB6 // 2 Bytes #define REG_SPDIO_RXBD_C2H_RPTR 0xB8 // 2 Bytes #define REG_SPDIO_HCI_RX_REQ 0xBA // 1 Byte #define REG_SPDIO_CPU_RST_DMA 0xBB // 1 Byte #define REG_SPDIO_RX_REQ_ADDR 0xBC // 2 Bytes #define REG_SPDIO_CPU_INT_MASK 0xC0 // 2 Bytes #define REG_SPDIO_CPU_INT_STAS 0xC2 // 2 Bytes #define REG_SPDIO_CCPWM 0xC4 // 1 Byts #define REG_SPDIO_CPU_IND 0xC5 // 1 Byte #define REG_SPDIO_CCPWM2 0xC6 // 2 Bytes #define REG_SPDIO_CPU_H2C_MSG 0xC8 // 4 Bytes #define REG_SPDIO_CPU_C2H_MSG 0xCC // 4 Bytes #define REG_SPDIO_CRPWM 0xD0 // 1 Bytes #define REG_SPDIO_CRPWM2 0xD2 // 2 Bytes #define REG_SPDIO_AHB_DMA_CTRL 0xD4 // 4 Bytes #define REG_SPDIO_RXBD_CNT 0xD8 // 4 Bytes #define REG_SPDIO_TX_BUF_UNIT_SZ 0xD9 // 1 Bytes #define REG_SPDIO_RX_BD_FREE_CNT 0xDA // 2 Bytes #define REG_SPDIO_CPU_H2C_MSG_EXT 0xDC // 4 Bytes #define REG_SPDIO_CPU_C2H_MSG_EXT 0xE0 // 4 Bytes // Register REG_SPDIO_CPU_RST_DMA #define BIT_CPU_RST_SDIO_DMA BIT(7) // Register REG_SPDIO_CPU_INT_MASK, REG_SPDIO_CPU_INT_STAS #define BIT_TXFIFO_H2C_OVF BIT(0) #define BIT_H2C_BUS_RES_FAIL BIT(1) #define BIT_H2C_DMA_OK BIT(2) #define BIT_C2H_DMA_OK BIT(3) #define BIT_H2C_MSG_INT BIT(4) #define BIT_RPWM1_INT BIT(5) #define BIT_RPWM2_INT BIT(6) #define BIT_SDIO_RST_CMD_INT BIT(7) #define BIT_RXBD_FLAG_ERR_INT BIT(8) #define BIT_RX_BD_AVAI_INT BIT(9) #define BIT_HOST_WAKE_CPU_INT BIT(10) // Register REG_SPDIO_CPU_IND #define BIT_SYSTEM_TRX_RDY_IND BIT(0) // Register REG_SPDIO_HCI_RX_REQ #define BIT_HCI_RX_REQ BIT(0) /* Register for SOC_HCI_COM_FUN_EN */ #define BIT_SOC_HCI_SDIOD_OFF_EN BIT(1) // SDIO Function Block on Power_Off domain #define BIT_SOC_HCI_SDIOD_ON_EN BIT(0) // SDIO Function Block on Power_On domain /* Register REG_PESOC_HCI_CLK_CTRL0 */ #define BIT_SOC_SLPCK_SDIO_HST_EN BIT(3) // SDIO_HST clock enable when CPU sleep command #define BIT_SOC_ACTCK_SDIO_HST_EN BIT(2) // SDIO_HST clock enable in CPU run mode #define BIT_SOC_SLPCK_SDIO_DEV_EN BIT(1) // SDIO_DEV clock enable when CPU sleep command #define BIT_SOC_ACTCK_SDIO_DEV_EN BIT(0) // SDIO_DEV clock enable in CPU run mode /***** Structer for each Register *****/ #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) // Little Endian // Register REG_SPDIO_HCI_RX_REQ @ 0xBA typedef struct _SPDIO_HCI_RX_REQ { u8 HCI_RX_REQ:1; /* bit[0], CPU trigger this bit to enable SDIO IP RX transfer by fetch BD info */ u8 Reserved:7; /* bit[7:1], Reserved */ } SPDIO_HCI_RX_REQ, *PSPDIO_HCI_RX_REQ; // Register REG_SPDIO_CPU_RST_DMA @ 0xBB typedef struct _SPDIO_CPU_RST_DMA { u8 Reserved:7; /* bit[6:0], Reserved */ u8 CPU_RST_SDIO:1; /* bit[7], CPU set this bit to reset SDIO DMA */ } SPDIO_CPU_RST_DMA, *PSPDIO_CPU_RST_DMA; // Register REG_SPDIO_CPU_INT_MASK @ 0xC0 typedef struct _SPDIO_CPU_INT_MASK { u16 TXFIFO_H2C_OVF:1; /* bit[0], set 0 to mask TXFIFO_H2C_OVF_INT */ u16 H2C_BUS_RES_FAIL:1; /* bit[1], set 0 to mask H2C_BUS_RES_FAIL_INT */ u16 H2C_DMA_OK:1; /* bit[2], set 0 to mask H2C_DMA_OK_INT */ u16 C2H_DMA_OK:1; /* bit[3], set 0 to mask C2H_DMA_OK_INT */ u16 H2C_MSG_INT:1; /* bit[4], set 0 to mask H2C_MSG_INT_INT */ u16 RPWM_INT:1; /* bit[5], set 0 to mask RPWM_INT */ u16 RPWM2_INT:1; /* bit[6], set 0 to mask RPWM2_INT */ u16 SDIO_RST_CMD_INT:1; /* bit[7], set 0 to mask SDIO_RST_CMD_INT */ u16 BD_FLAG_ERR_INT:1; /* bit[8], set 0 to mask BD_FLAG_ERR_INT */ u16 Reserved:7; /* bit[15:9], Reserved */ } SPDIO_CPU_INT_MASK, *PSPDIO_CPU_INT_MASK; // Register REG_SPDIO_CPU_INT_STATUS @ 0xC2 typedef struct _SPDIO_CPU_INT_STAS { u16 TXFIFO_H2C_OVF:1; /* bit[0], set 0 to mask TXFIFO_H2C_OVF_INT */ u16 H2C_BUS_RES_FAIL:1; /* bit[1], set 0 to mask H2C_BUS_RES_FAIL_INT */ u16 H2C_DMA_OK:1; /* bit[2], set 0 to mask H2C_DMA_OK_INT */ u16 C2H_DMA_OK:1; /* bit[3], set 0 to mask C2H_DMA_OK_INT */ u16 H2C_MSG_INT:1; /* bit[4], set 0 to mask H2C_MSG_INT_INT */ u16 RPWM_INT:1; /* bit[5], set 0 to mask RPWM_INT */ u16 RPWM2_INT:1; /* bit[6], set 0 to mask RPWM2_INT */ u16 SDIO_RST_CMD_INT:1; /* bit[7], set 0 to mask SDIO_RST_CMD_INT */ u16 BD_FLAG_ERR_INT:1; /* bit[8], set 0 to mask BD_FLAG_ERR_INT */ u16 Reserved:7; /* bit[15:9], Reserved */ } SPDIO_CPU_INT_STAS, *PSPDIO_CPU_INT_STAS; // Register REG_SPDIO_CCPWM @ 0xC4 typedef struct _SPDIO_CCPWM { u8 :1; /* bit[0] */ u8 WLAN_TRX:1; /* bit[1], 0: WLAN Off; 1: WLAN On */ u8 RPS_ST:1; /* bit[2], 0/1: AP Register Sleep/Active state */ u8 WWLAN:1; /* bit[3], 0/1: "Wake on WLAN"/"Normal" state */ u8 Reserved:3; /* bit[6:4], Reserved */ u8 TOGGLING:1; /* bit[7], issue interrupt when 0->1 or 1->0 */ } SPDIO_CCPWM, *PSPDIO_CCPWM; // Register REG_SPDIO_CPU_IND @ 0xC5 typedef struct _SPDIO_CPU_IND { u8 SYS_TRX_RDY:1; /* bit[0], To indicate the Host system that CPU is ready for TRX , to be sync to 0x87[0] */ u8 Reserved:7; /* bit[7:1], Reserved */ } SPDIO_CPU_IND, *PSPDIO_CPU_IND; // Register REG_SPDIO_CPU_H2C_MSG @ 0xC8 typedef struct _SPDIO_CPU_H2C_MSG { u32 CPU_H2C_MSG:30; /* bit[30:0], Host CPU to FW message, sync from REG_SDIO_H2C_MSG */ u32 Reserved:1; /* bit[31], Reserved */ } SPDIO_CPU_H2C_MSG, *PSPDIO_CPU_H2C_MSG; // Register REG_SPDIO_CPU_C2H_MSG @ 0xCC typedef struct _SPDIO_CPU_C2H_MSG { u32 CPU_C2H_MSG:30; /* bit[30:0], FW to Host CPU message, sync to REG_SDIO_C2H_MSG */ u32 Reserved:1; /* bit[31], Reserved */ } SPDIO_CPU_C2H_MSG, *PSPDIO_CPU_C2H_MSG; // Register REG_SPDIO_CRPWM @ 0xD0 typedef struct _SPDIO_CRPWM { u8 :1; /* bit[0] */ u8 WLAN_TRX:1; /* bit[1], 0: WLAN Off; 1: WLAN On */ u8 RPS_ST:1; /* bit[2], 0/1: AP Register Sleep/Active state */ u8 WWLAN:1; /* bit[3], 0/1: "Wake on WLAN"/"Normal" state */ u8 Reserved:3; /* bit[6:4], Reserved */ u8 TOGGLING:1; /* bit[7], issue interrupt when 0->1 or 1->0 */ } SPDIO_CRPWM, *PSPDIO_CRPWM; // Register REG_SPDIO_AHB_DMA_CTRL @ 0xD4 typedef struct _SPDIO_AHB_DMA_CTRL { u32 TXFF_WLEVEL:7; /* bit[6:0], SPDIO TX FIFO water level */ u32 :1; /* bit[7] */ u32 RXFF_WLEVEL:7; /* bit[14:8], SPDIO RX FIFO water level */ u32 :1; /* bit[15] */ u32 AHB_DMA_CS:4; /* bit[19:16], AHB DMA state */ u32 :1; /* bit[20] */ u32 AHB_MASTER_RDY:1; /* bit[21], AHB Master Hready signal */ u32 AHB_DMA_TRANS:2; /* bit[23:22], AHB DMA Trans value, for debugging */ u32 AHB_BUSY_WAIT_CNT:4; /* bit[27:24], timeout for AHB controller to wait busy */ u32 AHB_BURST_TYPE:3; /* bit[30:28], AHB burst type */ u32 DISPATCH_TXAGG:1; /* bit[31], Enable to dispatch aggregated TX packet */ } SPDIO_AHB_DMA_CTRL, *PSPDIO_AHB_DMA_CTRL; #else /* else of '#if LITTLE_ENDIAN' */ // Big Endian typedef struct _SPDIO_HCI_RX_REQ { u8 Reserved:7; /* bit[7:1], Reserved */ u8 HCI_RX_REQ:1; /* bit[0], CPU trigger this bit to enable SDIO IP RX transfer by fetch BD info */ } SPDIO_HCI_RX_REQ, *PSPDIO_HCI_RX_REQ; // Register REG_SPDIO_CPU_RST_DMA @ 0xBB typedef struct _SPDIO_CPU_RST_DMA { u8 CPU_RST_SDIO:1; /* bit[7], CPU set this bit to reset SDIO DMA */ u8 Reserved:7; /* bit[6:0], Reserved */ } SPDIO_CPU_RST_DMA, *PSPDIO_CPU_RST_DMA; // Register REG_SPDIO_CPU_INT_MASK @ 0xC0 typedef struct _SPDIO_CPU_INT_MASK { u16 Reserved:7; /* bit[15:9], Reserved */ u16 BD_FLAG_ERR_INT:1; /* bit[8], set 0 to mask BD_FLAG_ERR_INT */ u16 SDIO_RST_CMD_INT:1; /* bit[7], set 0 to mask SDIO_RST_CMD_INT */ u16 RPWM2_INT:1; /* bit[6], set 0 to mask RPWM2_INT */ u16 RPWM_INT:1; /* bit[5], set 0 to mask RPWM_INT */ u16 H2C_MSG_INT:1; /* bit[4], set 0 to mask H2C_MSG_INT_INT */ u16 C2H_DMA_OK:1; /* bit[3], set 0 to mask C2H_DMA_OK_INT */ u16 H2C_DMA_OK:1; /* bit[2], set 0 to mask H2C_DMA_OK_INT */ u16 H2C_BUS_RES_FAIL:1; /* bit[1], set 0 to mask H2C_BUS_RES_FAIL_INT */ u16 TXFIFO_H2C_OVF:1; /* bit[0], set 0 to mask TXFIFO_H2C_OVF_INT */ } SPDIO_CPU_INT_MASK, *PSPDIO_CPU_INT_MASK; // Register REG_SPDIO_CPU_INT_STAS @ 0xC2 typedef struct _SPDIO_CPU_INT_STAS { u16 Reserved:7; /* bit[15:9], Reserved */ u16 BD_FLAG_ERR_INT:1; /* bit[8], set 0 to mask BD_FLAG_ERR_INT */ u16 SDIO_RST_CMD_INT:1; /* bit[7], set 0 to mask SDIO_RST_CMD_INT */ u16 RPWM2_INT:1; /* bit[6], set 0 to mask RPWM2_INT */ u16 RPWM_INT:1; /* bit[5], set 0 to mask RPWM_INT */ u16 H2C_MSG_INT:1; /* bit[4], set 0 to mask H2C_MSG_INT_INT */ u16 C2H_DMA_OK:1; /* bit[3], set 0 to mask C2H_DMA_OK_INT */ u16 H2C_DMA_OK:1; /* bit[2], set 0 to mask H2C_DMA_OK_INT */ u16 H2C_BUS_RES_FAIL:1; /* bit[1], set 0 to mask H2C_BUS_RES_FAIL_INT */ u16 TXFIFO_H2C_OVF:1; /* bit[0], set 0 to mask TXFIFO_H2C_OVF_INT */ } SPDIO_CPU_INT_STAS, *PSPDIO_CPU_INT_STAS; // Register REG_SPDIO_CCPWM @ 0xC4 typedef struct _SPDIO_CCPWM { u8 TOGGLING:1; /* bit[7], issue interrupt when 0->1 or 1->0 */ u8 Reserved:3; /* bit[6:4], Reserved */ u8 WWLAN:1; /* bit[3], 0/1: "Wake on WLAN"/"Normal" state */ u8 RPS_ST:1; /* bit[2], 0/1: AP Register Sleep/Active state */ u8 WLAN_TRX:1; /* bit[1], 0: WLAN Off; 1: WLAN On */ u8 :1; /* bit[0] */ } SPDIO_CCPWM, *PSPDIO_CCPWM; // Register REG_SPDIO_CPU_IND @ 0xC5 typedef struct _SPDIO_CPU_IND { u8 Reserved:7; /* bit[7:1], Reserved */ u8 SYS_TRX_RDY:1; /* bit[0], To indicate the Host system that CPU is ready for TRX , to be sync to 0x87[0] */ } SPDIO_CPU_IND, *PSPDIO_CPU_IND; // Register REG_SPDIO_CPU_H2C_MSG @ 0xC8 typedef struct _SPDIO_CPU_H2C_MSG { u32 Reserved:1; /* bit[31], Reserved */ u32 CPU_H2C_MSG:30; /* bit[30:0], Host CPU to FW message */ } SPDIO_CPU_H2C_MSG, *PSPDIO_CPU_H2C_MSG; // Register REG_SPDIO_CPU_C2H_MSG @ 0xCC typedef struct _SPDIO_CPU_C2H_MSG { u32 Reserved:1; /* bit[31], Reserved */ u32 CPU_C2H_MSG:30; /* bit[30:0], FW to Host CPU message, sync to REG_SDIO_C2H_MSG */ } SPDIO_CPU_C2H_MSG, *PSPDIO_CPU_C2H_MSG; // Register REG_SPDIO_CRPWM @ 0xD0 typedef struct _SPDIO_CRPWM { u8 TOGGLING:1; /* bit[7], issue interrupt when 0->1 or 1->0 */ u8 Reserved:3; /* bit[6:4], Reserved */ u8 WWLAN:1; /* bit[3], 0/1: "Wake on WLAN"/"Normal" state */ u8 RPS_ST:1; /* bit[2], 0/1: AP Register Sleep/Active state */ u8 WLAN_TRX:1; /* bit[1], 0: WLAN Off; 1: WLAN On */ u8 :1; /* bit[0] */ } SPDIO_CRPWM, *PSPDIO_CRPWM; // Register REG_SPDIO_AHB_DMA_CTRL @ 0xD4 typedef struct _SPDIO_AHB_DMA_CTRL { u32 DISPATCH_TXAGG:1; /* bit[31], Enable to dispatch aggregated TX packet */ u32 AHB_BURST_TYPE:3; /* bit[30:28], AHB burst type */ u32 AHB_BUSY_WAIT_CNT:4; /* bit[27:24], timeout for AHB controller to wait busy */ u32 AHB_DMA_TRANS:2; /* bit[23:22], AHB DMA Trans value, for debugging */ u32 AHB_MASTER_RDY:1; /* bit[21], AHB Master Hready signal */ u32 :1; /* bit[20] */ u32 AHB_DMA_CS:4; /* bit[19:16], AHB DMA state */ u32 :1; /* bit[15] */ u32 RXFF_WLEVEL:7; /* bit[14:8], SPDIO RX FIFO water level */ u32 :1; /* bit[7] */ u32 TXFF_WLEVEL:7; /* bit[6:0], SPDIO TX FIFO water level */ } SPDIO_AHB_DMA_CTRL, *PSPDIO_AHB_DMA_CTRL; #endif /* end of '#if LITTLE_ENDIAN' */ //#define TX_FIFO_ADDR 0x0000 //#define TX_FIFO_SIZE 0x8000 //TX BD setting #if SDIO_BOOT_DRIVER // for build ROM library #define SDIO_TX_BD_NUM 2 // Number of TX BD #define SDIO_TX_BD_BUF_SIZE (2048+32) // the size of a TX BD pointed buffer, WLan header = 26 bytes #define SDIO_TX_PKT_NUM 10 // Number of TX packet handler //RX BD setting #define RX_BD_FREE_TH 4 // trigger the interrupt when free RX BD over this threshold #define MAX_RX_BD_BUF_SIZE 16380 // the Maximum size for a RX_BD point to, make it 4-bytes aligned #define SDIO_RX_PKT_NUM 3 // Number of RX packet handler //#define SDIO_RX_BD_NUM 10 // Number of RX BD, to make 32K of bus aggregation, it needs 22 RX_BD at least #define SDIO_RX_BD_NUM (SDIO_RX_PKT_NUM*2) // Number of RX BD, to make 32K of bus aggregation, it needs 22 RX_BD at least #define SDIO_RX_BD_BUF_SIZE (2048+24) // the size of a RX BD pointed buffer, sizeof(RX Desc) = 26 bytes #define MIN_RX_BD_SEND_PKT 2 /* the minum needed RX_BD to send a Packet to Host, we need 2: one for RX_Desc, the other for payload */ // CCPWM2 bit map definition for Firmware download #define SDIO_INIT_DONE (BIT0) #define SDIO_MEM_WR_DONE (BIT1) #define SDIO_MEM_RD_DONE (BIT2) #define SDIO_MEM_ST_DONE (BIT3) #define SDIO_CPWM2_TOGGLE (BIT15) #else #if CONFIG_INIC_EN //TX BD setting #define SDIO_TX_BD_NUM 34 // Number of TX BD #define SDIO_TX_BD_BUF_SIZE 1540 //1514+24 //#define SDIO_TX_PKT_NUM 1 // not used //RX BD setting #define RX_BD_FREE_TH 5 // trigger the interrupt when free RX BD over this threshold #define SDIO_RX_BD_BUF_SIZE 1540 //1514+24 #define MAX_RX_BD_BUF_SIZE 16380 // the Maximum size for a RX_BD point to, make it 4-bytes aligned #define SDIO_RX_BD_NUM 34 // Number of RX BD, to make 32K of bus aggregation, it needs 22 RX_BD at least #define SDIO_RX_PKT_NUM 128 // Number of RX packet handler #define MIN_RX_BD_SEND_PKT 2 /* the minum needed RX_BD to send a Packet to Host, we need 2: one for RX_Desc, the other for payload */ #else #define SDIO_TX_BD_NUM 24 // Number of TX BD #define SDIO_TX_BD_BUF_SIZE (2048+32) // the size of a TX BD pointed buffer, WLan header = 26 bytes #define SDIO_TX_PKT_NUM 128 // Number of TX packet handler //RX BD setting #define RX_BD_FREE_TH 5 // trigger the interrupt when free RX BD over this threshold #define SDIO_RX_BD_BUF_SIZE 2048 #define MAX_RX_BD_BUF_SIZE 16380 // the Maximum size for a RX_BD point to, make it 4-bytes aligned //#define SDIO_TX_FIFO_SIZE (1024*64) // 64K #define SDIO_RX_BD_NUM 24 // Number of RX BD, to make 32K of bus aggregation, it needs 22 RX_BD at least #define SDIO_RX_PKT_NUM 128 // Number of RX packet handler #define MIN_RX_BD_SEND_PKT 2 /* the minum needed RX_BD to send a Packet to Host, we need 2: one for RX_Desc, the other for payload */ #endif #endif #define SDIO_IRQ_PRIORITY 10 /* SDIO Events */ #define SDIO_EVENT_IRQ BIT(0) // Interrupt triggered #define SDIO_EVENT_RX_PKT_RDY BIT(1) // A new SDIO packet ready #define SDIO_EVENT_C2H_DMA_DONE BIT(2) // Interrupt of C2H DMA done triggered #define SDIO_EVENT_DUMP BIT(3) // SDIO status dump periodically Enable #define SDIO_EVENT_TXBD_REFILL BIT(4) // To refill TX BD buffer #define SDIO_EVENT_EXIT BIT(28) // Request to exit the SDIO task #define SDIO_EVENT_MP_STOPPED BIT(29) // The SDIO task is stopped #define SDIO_EVENT_TX_STOPPED BIT(30) // The SDIO task is stopped #define SDIO_EVENT_RX_STOPPED BIT(31) // The SDIO task is stopped #define SDIO_TASK_PRIORITY 1 // it can be 0(lowest) ~ configMAX_PRIORITIES-1(highest) #define SDIO_MP_TASK_PRIORITY 2 // it can be 0(lowest) ~ configMAX_PRIORITIES-1(highest) //#if SDIO_TASK_PRIORITY > (configMAX_PRIORITIES - 1) #if SDIO_TASK_PRIORITY > (4 - 1) #error "SDIO Task Priority Should be 0~(configMAX_PRIORITIES-1)" #endif //#define TX_RX_PACKET_SIZE 0x144 typedef struct _SDIO_TX_BD_ { u32 Address; /* The TX buffer physical address, it must be 4-bytes aligned */ }SDIO_TX_BD, *PSDIO_TX_BD; #define TX_BD_STRUCTURE_SIZE (sizeof(SDIO_TX_BD)) /* The RX Buffer Descriptor format */ #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) typedef struct _SDIO_RX_BD_ { u32 BuffSize:14; /* bit[13:0], RX Buffer Size, Maximum 16384-1 */ u32 LS:1; /* bit[14], is the Last Segment ? */ u32 FS:1; /* bit[15], is the First Segment ? */ u32 Seq:16; /* bit[31:16], The sequence number, it's no use for now */ u32 PhyAddr; /* The RX buffer physical address, it must be 4-bytes aligned */ } SDIO_RX_BD, *PSDIO_RX_BD; #else typedef struct _SDIO_RX_BD_ { u32 Seq:16; /* bit[31:16], The sequence number, be used for ?? */ u32 FS:1; /* bit[15], is the First Segment ? */ u32 LS:1; /* bit[14], is the Last Segment ? */ u32 BuffSize:14; /* bit[13:0], RX Buffer Size, Maximum 16384 */ u32 PhyAddr; /* The RX buffer physical address, it must be 4-bytes aligned */ } SDIO_RX_BD, *PSDIO_RX_BD; #endif #define RX_BD_STRUCTURE_SIZE (sizeof(SDIO_RX_BD)) // TODO: This data structer just for test, we should modify it for the normal driver typedef struct _SDIO_TX_DESC{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 txpktsize:16; // bit[15:0] u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 bus_agg_num:8; // bit[31:24], the bus aggregation number #else u32 bus_agg_num:8; // bit[31:24], the bus aggregation number u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 txpktsize:16; // bit[15:0] #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the packet type u32 rsvd0:24; #else u32 rsvd0:24; u32 type:8; // bit[7:0], the packet type #endif // u4Byte 2 u32 rsvd1; // u4Byte 3 u32 rsvd2; // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_TX_DESC, *PSDIO_TX_DESC; // TX Desc for Memory Write command typedef struct _SDIO_TX_DESC_MW{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 txpktsize:16; // bit[15:0] u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 bus_agg_num:8; // bit[31:24], the bus aggregation number #else u32 bus_agg_num:8; // bit[31:24], the bus aggregation number u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 txpktsize:16; // bit[15:0] #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the packet type u32 reply:1; // bit[8], request to send a reply message u32 rsvd0:23; #else u32 rsvd0:23; u32 reply:1; // bit[8], request to send a reply message u32 type:8; // bit[7:0], the packet type #endif // u4Byte 2 u32 start_addr; // memory write start address // u4Byte 3 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 write_len:16; // bit[15:0], the length to write u32 rsvd2:16; // bit[31:16] #else u32 rsvd2:16; // bit[31:16] u32 write_len:16; // bit[15:0], the length to write #endif // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_TX_DESC_MW, *PSDIO_TX_DESC_MW; // TX Desc for Memory Read command typedef struct _SDIO_TX_DESC_MR{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 txpktsize:16; // bit[15:0] u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 bus_agg_num:8; // bit[31:24], the bus aggregation number #else u32 bus_agg_num:8; // bit[31:24], the bus aggregation number u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 txpktsize:16; // bit[15:0] #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the packet type u32 rsvd0:24; #else u32 rsvd0:24; u32 type:8; // bit[7:0], the packet type #endif // u4Byte 2 u32 start_addr; // memory write start address // u4Byte 3 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 read_len:16; // bit[15:0], the length to read u32 rsvd2:16; // bit[31:16] #else u32 rsvd2:16; // bit[31:16] u32 read_len:16; // bit[15:0], the length to read #endif // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_TX_DESC_MR, *PSDIO_TX_DESC_MR; // TX Desc for Memory Set command typedef struct _SDIO_TX_DESC_MS{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 txpktsize:16; // bit[15:0] u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 bus_agg_num:8; // bit[31:24], the bus aggregation number #else u32 bus_agg_num:8; // bit[31:24], the bus aggregation number u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 txpktsize:16; // bit[15:0] #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the packet type u32 data:8; // bit[8:15], the value to be written to the memory u32 reply:1; // bit[16], request to send a reply message u32 rsvd0:15; #else u32 rsvd0:15; u32 reply:1; // bit[16], request to send a reply message u32 data:8; // bit[8:15], the value to be written to the memory u32 type:8; // bit[7:0], the packet type #endif // u4Byte 2 u32 start_addr; // memory write start address // u4Byte 3 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 write_len:16; // bit[15:0], the length to write u32 rsvd2:16; // bit[31:16] #else u32 rsvd2:16; // bit[31:16] u32 write_len:16; // bit[15:0], the length to write #endif // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_TX_DESC_MS, *PSDIO_TX_DESC_MS; // TX Desc for Jump to Start command typedef struct _SDIO_TX_DESC_JS{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 txpktsize:16; // bit[15:0] u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 bus_agg_num:8; // bit[31:24], the bus aggregation number #else u32 bus_agg_num:8; // bit[31:24], the bus aggregation number u32 offset:8; // bit[23:16], store the sizeof(SDIO_TX_DESC) u32 txpktsize:16; // bit[15:0] #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the packet type u32 rsvd0:24; #else u32 rsvd0:24; u32 type:8; // bit[7:0], the packet type #endif // u4Byte 2 u32 start_fun; // the pointer of the startup function // u4Byte 3 u32 rsvd2; // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_TX_DESC_JS, *PSDIO_TX_DESC_JS; #define SIZE_TX_DESC (sizeof(SDIO_TX_DESC)) // define the TX BD buffer size with unite of 64 byets /* Be carefull!! the setting of hardware's TX BD buffer size may exceed the real size of the TX BD buffer size, and then it may cause the hardware DMA write the buffer overflow */ #define SDIO_TX_BUF_SZ_UNIT 64 #define SDIO_TX_BD_BUF_USIZE ((((SDIO_TX_BD_BUF_SIZE+sizeof(SDIO_TX_DESC)-1)/SDIO_TX_BUF_SZ_UNIT)+1)&0xff) typedef struct _SDIO_TX_BD_BUFFER_ { SDIO_TX_DESC TX_Desc; u8 TX_Buffer[SDIO_TX_BD_BUF_SIZE]; }SDIO_TX_BD_BUFFER, *PSDIO_TX_BD_BUFFER; // TODO: This data structer just for test, we should modify it for the normal driver typedef struct _SDIO_RX_DESC{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 pkt_len:16; // bit[15:0], the packet size u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 rsvd0:6; // bit[29:24] u32 icv:1; // bit[30], ICV error u32 crc:1; // bit[31], CRC error #else u32 crc:1; // bit[31], CRC error u32 icv:1; // bit[30], ICV error u32 rsvd0:6; // bit[29:24] u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 pkt_len:16; // bit[15:0], the packet size #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the type of this packet u32 rsvd1:24; // bit[31:8] #else u32 rsvd1:24; // bit[31:8] u32 type:8; // bit[7:0], the type of this packet #endif // u4Byte 2 u32 rsvd2; // u4Byte 3 u32 rsvd3; // u4Byte 4 u32 rsvd4; // u4Byte 5 u32 rsvd5; } SDIO_RX_DESC, *PSDIO_RX_DESC; // For memory read command typedef struct _SDIO_RX_DESC_MR{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 pkt_len:16; // bit[15:0], the packet size u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 rsvd0:8; // bit[31:24] #else u32 rsvd0:8; // bit[31:24] u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 pkt_len:16; // bit[15:0], the packet size #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the type of this packet u32 rsvd1:24; // bit[31:8] #else u32 rsvd1:24; // bit[31:8] u32 type:8; // bit[7:0], the type of this packet #endif // u4Byte 2 u32 start_addr; // u4Byte 3 u32 rsvd2; // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_RX_DESC_MR, *PSDIO_RX_DESC_MR; // For memory write reply command typedef struct _SDIO_RX_DESC_MW{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 pkt_len:16; // bit[15:0], the packet size u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 rsvd0:8; // bit[31:24] #else u32 rsvd0:8; // bit[31:24] u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 pkt_len:16; // bit[15:0], the packet size #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the type of this packet u32 rsvd1:24; // bit[31:8] #else u32 rsvd1:24; // bit[31:8] u32 type:8; // bit[7:0], the type of this packet #endif // u4Byte 2 u32 start_addr; // u4Byte 3 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 write_len:16; // bit[15:0], the type of this packet u32 result:8; // bit[23:16], the result of memory write command u32 rsvd2:8; // bit[31:24] #else u32 rsvd2:8; // bit[31:24] u32 result:8; // bit[23:16], the result of memory write command u32 write_len:16; // bit[15:0], the type of this packet #endif // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_RX_DESC_MW, *PSDIO_RX_DESC_MW; // For memory set reply command typedef struct _SDIO_RX_DESC_MS{ // u4Byte 0 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 pkt_len:16; // bit[15:0], the packet size u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 rsvd0:8; // bit[31:24] #else u32 rsvd0:8; // bit[31:24] u32 offset:8; // bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc u32 pkt_len:16; // bit[15:0], the packet size #endif // u4Byte 1 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 type:8; // bit[7:0], the type of this packet u32 rsvd1:24; // bit[31:8] #else u32 rsvd1:24; // bit[31:8] u32 type:8; // bit[7:0], the type of this packet #endif // u4Byte 2 u32 start_addr; // u4Byte 3 #if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN) u32 write_len:16; // bit[15:0], the type of this packet u32 result:8; // bit[23:16], the result of memory write command u32 rsvd2:8; // bit[31:24] #else u32 rsvd2:8; // bit[31:24] u32 result:8; // bit[23:16], the result of memory write command u32 write_len:16; // bit[15:0], the type of this packet #endif // u4Byte 4 u32 rsvd3; // u4Byte 5 u32 rsvd4; } SDIO_RX_DESC_MS, *PSDIO_RX_DESC_MS; #define SIZE_RX_DESC (sizeof(SDIO_RX_DESC)) typedef struct _SDIO_RX_BD_BUFFER_ { SDIO_RX_DESC RX_Desc; u8 RX_Buffer[SDIO_RX_BD_BUF_SIZE]; }SDIO_RX_BD_BUFFER, *PSDIO_RX_BD_BUFFER; /* The data structer for a packet fordwarding to the WLan driver to transmit it */ // TODO: This data structer just for test, we may need modify it for the normal driver typedef struct _SDIO_TX_PACKET_ { u8 *pHeader; // Point to the 1st byte of the packets u16 PktSize; // the size (bytes) of this packet _LIST list; // the link list to chain packets u8 isDyna; // is Dynamic allocated } SDIO_TX_PACKET, *PSDIO_TX_PACKET; /* the data structer to bind a TX_BD with a TX Packet */ typedef struct _SDIO_TX_BD_HANDLE_ { SDIO_TX_BD *pTXBD; // Point to the TX_BD buffer #if CONFIG_INIC_EN #if CONFIG_INIC_SKB_TX struct sk_buff *skb; #endif #endif SDIO_TX_PACKET *pPkt; // point to the Tx Packet u8 isPktEnd; // For a packet over 1 BD , this flag to indicate is this BD contains a packet end u8 isFree; // is this TX BD free } SDIO_TX_BD_HANDLE, *PSDIO_TX_BD_HANDLE; /* The data structer for a packet which from the WLan driver to send to the Host */ // TODO: This data structer just for test, we may need modify it for the normal driver #if SDIO_BOOT_DRIVER typedef struct _SDIO_RX_PACKET_ { // SDIO_RX_DESC RxDesc; // The RX Descriptor for this packet, to be send to Host ahead this packet u8 *pData; // point to the head of payload of this packet u16 Offset; // the offset from the pData to the payload buffer _LIST list; // the link list to chain packets u8 PktBuf[SDIO_RX_BD_BUF_SIZE]; // the Rx_Desc + payload data buffer, the first 24 bytes is reserved for RX_DESC } SDIO_RX_PACKET, *PSDIO_RX_PACKET; #else typedef struct _SDIO_RX_PACKET_ { SDIO_RX_DESC RxDesc; // The RX Descriptor for this packet, to be send to Host ahead this packet #if CONFIG_INIC_EN #if CONFIG_INIC_SKB_RX struct sk_buff *skb; #endif #endif u8 *pData; // point to the head of payload of this packet u16 Offset; // the offset from the pData to the payload buffer _LIST list; // the link list to chain packets u8 isDyna; // is Dynamic allocated } SDIO_RX_PACKET, *PSDIO_RX_PACKET; #endif /* the data structer to bind a RX_BD with a RX Packet */ typedef struct _SDIO_RX_BD_HANDLE_ { SDIO_RX_BD *pRXBD; // Point to the RX_BD buffer SDIO_RX_PACKET *pPkt; // point to the Rx Packet u8 isPktEnd; // For a packet over 1 BD , this flag to indicate is this BD contains a packet end u8 isFree; // is this RX BD free (DMA done and its RX packet has been freed) } SDIO_RX_BD_HANDLE, *PSDIO_RX_BD_HANDLE; #if SDIO_MP_MODE typedef struct _SDIO_MP_CMD_ { u8 cmd_name[16]; u32 cmd_type; } SDIO_MP_CMD, *PSDIO_MP_CMD; typedef enum _SDIO_MP_CMD_TYPE_{ SDIO_MP_START=1, SDIO_MP_STOP=2, SDIO_MP_LOOPBACK=3, SDIO_MP_STATUS=4, SDIO_MP_READ_REG8=5, SDIO_MP_READ_REG16=6, SDIO_MP_READ_REG32=7, SDIO_MP_WRITE_REG8=8, SDIO_MP_WRITE_REG16=9, SDIO_MP_WRITE_REG32=10, SDIO_MP_WAKEUP=11, // wakeup the SDIO task manually, for debugging SDIO_MP_DUMP=12, // start/stop to dump the SDIO status periodically SDIO_MP_CTX=13, // setup continue TX test SDIO_MP_CRX=14, // setup continue RX test SDIO_MP_CRX_DA=15, // setup continue RX with dynamic allocate RX Buf test SDIO_MP_CRX_STOP=16, // setup continue RX test SDIO_MP_DBG_MSG=17, // Debug message On/Off }SDIO_MP_CMD_TYPE; typedef enum _SDIO_CRX_MODE_{ SDIO_CRX_STATIC_BUF = 1, SDIO_CRX_DYNA_BUF = 2, } SDIO_CRX_MODE; typedef struct _SDIO_MP_RX_PACKET_ { _LIST list; // this member MUST be the 1st one, the link list to chain packets u8 *pData; // point to the head of payload of this packet u16 Offset; // the offset from the pData to the payload u16 DataLen; // the data length of this packet } SDIO_MP_RX_PACKET, *PSDIO_MP_RX_PACKET; #endif // end of '#if SDIO_MP_MODE' #define SDIO_CMD_TX_ETH 0x83 // request to TX a 802.3 packet #define SDIO_CMD_TX_WLN 0x81 // request to TX a 802.11 packet #define SDIO_CMD_H2C 0x11 // H2C(host to device) command packet #define SDIO_CMD_MEMRD 0x51 // request to read a block of memory data #define SDIO_CMD_MEMWR 0x53 // request to write a block of memory #define SDIO_CMD_MEMST 0x55 // request to set a block of memory with a value #define SDIO_CMD_STARTUP 0x61 // request to jump to the start up function #define SDIO_CMD_RX_ETH 0x82 // indicate a RX 802.3 packet #define SDIO_CMD_RX_WLN 0x80 // indicate a RX 802.11 packet #define SDIO_CMD_C2H 0x10 // C2H(device to host) command packet #define SDIO_CMD_MEMRD_RSP 0x50 // response to memory block read command #define SDIO_CMD_MEMWR_RSP 0x52 // response to memory write command #define SDIO_CMD_MEMST_RSP 0x54 // response to memory set command #define SDIO_CMD_STARTED 0x60 // indicate the program has jumped to the given function enum SDIO_RPWM2_BITS { RPWM2_ACT_BIT = BIT0, // Active RPWM2_SLEEP_BIT = 0, // Sleep RPWM2_DSTANDBY_BIT = BIT1, // Deep Standby RPWM2_PG_BIT = 0, // Power Gated RPWM2_FBOOT_BIT = BIT2, // fast reboot RPWM2_NBOOT_BIT = 0, // normal reboot RPWM2_WKPIN_A5_BIT = BIT3, // enable GPIO A5 wakeup RPWM2_WKPIN_C7_BIT = BIT4, // enable GPIO C7 wakeup RPWM2_WKPIN_D5_BIT = BIT5, // enable GPIO D5 wakeup RPWM2_WKPIN_E3_BIT = BIT6, // enable GPIO E3 wakeup RPWM2_PIN_A5_LV_BIT = BIT7, // GPIO A5 wakeup level RPWM2_PIN_C7_LV_BIT = BIT8, // GPIO C7 wakeup level RPWM2_PIN_D5_LV_BIT = BIT9, // GPIO D5 wakeup level RPWM2_PIN_E3_LV_BIT = BIT10, // GPIO E3 wakeup level RPWM2_CG_BIT = BIT11, // Clock Gated RPWM2_ACK_BIT = BIT14, // Acknowledge RPWM2_TOGGLE_BIT = BIT15, // Toggle bit }; enum SDIO_CPWM2_BITS { CPWM2_ACT_BIT = BIT0, // Active CPWM2_DSTANDBY_BIT = BIT1, // Deep Standby CPWM2_FBOOT_BIT = BIT2, // fast reboot CPWM2_INIC_FW_RDY_BIT = BIT3, // is the iNIC FW(1) or Boot FW(0) CPWM2_TOGGLE_BIT = BIT15, // Toggle bit }; #ifdef CONFIG_SDIO_DEVICE_VERIFY #define TX_BD_STRUCTURE_NUM 10 #define RX_BD_STRUCTURE_NUM 10 #define TX_BD_BUFFER_SIZE 0x1000//0x2000//0x800 #define RX_BD_BUFFER_SIZE 0x400//0x800 #define SDIO_RAM_ADDR_BASE 0x20080000 #define SDIO_BUFFER_HEAD(addr) SDIO_RAM_ADDR_BASE + addr #define HAL_SDIO_BUFFER_READ8(addr) HAL_READ8(SDIO_RAM_ADDR_BASE, addr) #define HAL_SDIO_BUFFER_READ32(addr) HAL_READ32(SDIO_RAM_ADDR_BASE, addr) #define HAL_SDIO_BUFFER_WRITE32(addr, value) HAL_WRITE32(SDIO_RAM_ADDR_BASE, addr, value) //#define RX_BD_ADDR 0x8000 //#define RX_BUFFER_ADDR 0x8050 typedef enum _SDIO_TEST_FUNC_ { SDIO_TEST_INIT, // 0 SDIO_TEST_INT_ON, // 1 SDIO_TEST_INT_OFF, // 2 SDIO_HCI_RX_REQ, // 3 SDIO_RESET_TXFIFIO, // 4 SDIO_CPU_RST_DMA, // 5 SDIO_CPU_CLR_INT_REG, // 6 SDIO_TIMER_TEST, // 7 SDIO_TEST_DEBUG, // 8 SDIO_TEST, // 9 SDIO_HELP = 0xff }SDIO_TEST_FUNC, *PSDIO_TEST_FUNC; typedef struct _SDIO_TEST_ADAPTER_ { u32 TXWritePtr; u32 TXReadPtr; u16 RXWritePtr; u16 RXReadPtr; u16 IntMask; u16 IntStatus; } SDIO_TEST_ADAPTER, *PSDIO_TEST_ADAPTER; VOID MovePKTToRX( IN u32 Source, IN u32 Destination, IN u32 PKTSize ); BOOL PacketProcess( IN SDIO_TEST_ADAPTER *pDevStatus ); VOID SdioDeviceIrqHandleFunc( IN VOID *DATA ); VOID SdioDeviceTestApp( IN u32 Data ); VOID InitRXBD(VOID); VOID InitTXFIFO(VOID); VOID IrqRegister(VOID); #endif // end of "#ifdef CONFIG_SDIO_DEVICE_VERIFY" #endif /* #ifndef _RTL8195A_SDIO_H_ */