From 38dc83bcb826012a8fea31199bd69b323e9135bb Mon Sep 17 00:00:00 2001
From: pvvx <pvvx@mail.ru>
Date: Sat, 13 May 2017 02:29:53 +0300
Subject: [PATCH] update

---
 Makefile                                      |  35 +-
 RTL00_SDKV35a/Makefile                        |  39 ++
 .../rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c    |   7 -
 flasher.mk => RTL00_SDKV35a/flasher.mk        |  23 +-
 .../flasher/RTL00ConsoleROM.JLinkScript       |   6 +
 RTL00_SDKV35a/flasher/RTL00Console_ROM.bin    | Bin 0 -> 600 bytes
 RTL00_SDKV35a/flasher/RTL8710.jflash          | 119 ++++++
 RTL00_SDKV35a/flasher/RTL8710AF.hex           | 130 ++++++
 RTL00_SDKV35a/flasher/RTL_FFlash.JLinkScript  |  17 +
 RTL00_SDKV35a/flasher/RTL_RdROM.JLinkScript   |  11 +
 RTL00_SDKV35a/flasher/RTL_Reset.JLinkScript   |   9 +
 RTL00_SDKV35a/flasher/RTL_RunRAM.JLinkScript  |  12 +
 .../add_sample_bat/DAPLink-RTL00Console.bat   |   0
 .../add_sample_bat/DAPLink-RdFullFlash.bat    |   0
 .../flasher/add_sample_bat/DAPLink-Reset.bat  |   0
 .../add_sample_bat/DAPLink_WrFullFlash.bat    |   0
 .../add_sample_bat/JLink-RTL00ConsoleROM.bat  |   3 +
 .../add_sample_bat/JLink-RdFullFlash.bat      |   3 +
 .../flasher/add_sample_bat/JLink-Reset.bat    |   3 +
 .../flasher/add_sample_bat/JLink-RunRAM.bat   |   3 +
 .../add_sample_bat/JLinkGDB-RdFullFlash.bat   |   0
 .../add_sample_bat/JLinkGDB-RunRAM.bat        |   0
 .../add_sample_bat/JLinkGDB-WrFlash.bat       |   0
 .../flasher/add_sample_bat/JLinkGDBServer.bat |   0
 .../flasher/add_sample_bat/JLinkGDB_OTA.bat   |   0
 .../add_sample_bat/JLinkOCD-RdFullFlash.bat   |   0
 .../add_sample_bat/JLink_RdFullFlash.bat      |   0
 .../flasher/add_sample_bat/JlinkOpenOCD.bat   |   0
 .../add_sample_bat/STLink-RdFullFlash.bat     |   0
 .../flasher/add_sample_bat/STLink-Reset.bat   |   0
 .../flasher/add_sample_bat/ameba_tools.py     |  40 ++
 .../flasher/add_sample_bat/jlinkarm.py        | 113 ++++++
 .../flasher/add_sample_bat/paths.bat          |   1 +
 .../flasher/add_sample_bat/runram.py          |  53 +++
 RTL00_SDKV35a/flasher/ameba1.cfg              | 124 ++++++
 RTL00_SDKV35a/flasher/cortex.ocd              |  99 +++++
 RTL00_SDKV35a/flasher/flash_file.jlink        |   9 +
 RTL00_SDKV35a/flasher/gdb_flasher.jlink       | 198 ++++++++++
 RTL00_SDKV35a/flasher/gdb_init.jlink          |  30 ++
 RTL00_SDKV35a/flasher/gdb_ota.jlink           | 374 ++++++++++++++++++
 RTL00_SDKV35a/flasher/gdb_rdflash.jlink       |  17 +
 RTL00_SDKV35a/flasher/gdb_run_ram.jlink       |  11 +
 RTL00_SDKV35a/flasher/gdb_wrflash.jlink       | 166 ++++++++
 RTL00_SDKV35a/flasher/rtl8710.ocd             | 340 ++++++++++++++++
 RTL00_SDKV35a/flasher/rtl8710_flasher.bin     | Bin 0 -> 968 bytes
 paths.mk => RTL00_SDKV35a/paths.mk            |   6 +-
 sdkbuild.mk => RTL00_SDKV35a/sdkbuild.mk      |   6 +-
 sdkset.mk => RTL00_SDKV35a/sdkset.mk          |  66 ++--
 build/bin/ota.bin                             | Bin 300108 -> 300108 bytes
 build/bin/ram_2.bin                           | Bin 300072 -> 300072 bytes
 build/bin/ram_2.ns.bin                        | Bin 300088 -> 300088 bytes
 build/bin/ram_2.p.bin                         | Bin 300088 -> 300088 bytes
 build/bin/ram_all.bin                         | Bin 345160 -> 345160 bytes
 project.mk                                    |  54 +++
 userset.mk                                    |  12 +
 55 files changed, 2059 insertions(+), 80 deletions(-)
 create mode 100644 RTL00_SDKV35a/Makefile
 rename flasher.mk => RTL00_SDKV35a/flasher.mk (91%)
 create mode 100644 RTL00_SDKV35a/flasher/RTL00ConsoleROM.JLinkScript
 create mode 100644 RTL00_SDKV35a/flasher/RTL00Console_ROM.bin
 create mode 100644 RTL00_SDKV35a/flasher/RTL8710.jflash
 create mode 100644 RTL00_SDKV35a/flasher/RTL8710AF.hex
 create mode 100644 RTL00_SDKV35a/flasher/RTL_FFlash.JLinkScript
 create mode 100644 RTL00_SDKV35a/flasher/RTL_RdROM.JLinkScript
 create mode 100644 RTL00_SDKV35a/flasher/RTL_Reset.JLinkScript
 create mode 100644 RTL00_SDKV35a/flasher/RTL_RunRAM.JLinkScript
 rename DAPLink-RTL00Console.bat => RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RTL00Console.bat (100%)
 rename DAPLink-RdFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RdFullFlash.bat (100%)
 rename DAPLink-Reset.bat => RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-Reset.bat (100%)
 rename DAPLink_WrFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/DAPLink_WrFullFlash.bat (100%)
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/JLink-RTL00ConsoleROM.bat
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/JLink-RdFullFlash.bat
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/JLink-Reset.bat
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/JLink-RunRAM.bat
 rename JLinkGDB-RdFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RdFullFlash.bat (100%)
 rename JLinkGDB-RunRAM.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RunRAM.bat (100%)
 rename JLinkGDB-WrFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-WrFlash.bat (100%)
 rename JLinkGDBServer.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDBServer.bat (100%)
 rename JLinkGDB_OTA.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB_OTA.bat (100%)
 rename JLinkOCD-RdFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLinkOCD-RdFullFlash.bat (100%)
 rename JLink_RdFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/JLink_RdFullFlash.bat (100%)
 rename JlinkOpenOCD.bat => RTL00_SDKV35a/flasher/add_sample_bat/JlinkOpenOCD.bat (100%)
 rename STLink-RdFullFlash.bat => RTL00_SDKV35a/flasher/add_sample_bat/STLink-RdFullFlash.bat (100%)
 rename STLink-Reset.bat => RTL00_SDKV35a/flasher/add_sample_bat/STLink-Reset.bat (100%)
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/ameba_tools.py
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/jlinkarm.py
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/paths.bat
 create mode 100644 RTL00_SDKV35a/flasher/add_sample_bat/runram.py
 create mode 100644 RTL00_SDKV35a/flasher/ameba1.cfg
 create mode 100644 RTL00_SDKV35a/flasher/cortex.ocd
 create mode 100644 RTL00_SDKV35a/flasher/flash_file.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_flasher.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_init.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_ota.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_rdflash.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_run_ram.jlink
 create mode 100644 RTL00_SDKV35a/flasher/gdb_wrflash.jlink
 create mode 100644 RTL00_SDKV35a/flasher/rtl8710.ocd
 create mode 100644 RTL00_SDKV35a/flasher/rtl8710_flasher.bin
 rename paths.mk => RTL00_SDKV35a/paths.mk (91%)
 rename sdkbuild.mk => RTL00_SDKV35a/sdkbuild.mk (98%)
 rename sdkset.mk => RTL00_SDKV35a/sdkset.mk (96%)
 create mode 100644 project.mk
 create mode 100644 userset.mk

diff --git a/Makefile b/Makefile
index 0fe8da7..ac92758 100644
--- a/Makefile
+++ b/Makefile
@@ -1,50 +1,39 @@
+include userset.mk
 
 all: ram_all
 mp: ram_all_mp
 
 .PHONY: ram_all
 ram_all:
-	@$(MAKE) -f sdkbuild.mk
-	@$(MAKE) -f flasher.mk genbin1 genbin23
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk genbin1 genbin23
 
 .PHONY: ram_all_mp
 ram_all_mp:
-	@$(MAKE) -f sdkbuild.mk mp
-	@$(MAKE) -f flasher.mk mp
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk mp
+	@$(MAKE) -f $(SDK_PATH)flasher.mk mp
 	
 .PHONY: clean  clean_all
 clean:
-	@$(MAKE) -f sdkbuild.mk clean
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk clean
 
 clean_all:
-	@$(MAKE) -f sdkbuild.mk clean_all
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk clean_all
 	
 .PHONY: flashburn runram reset test readfullflash flashwebfs
 flashburn: 
-	#JLinkGDB-WrFlash.bat
-	@$(MAKE) -f flasher.mk flashburn
+	@$(MAKE) -f $(SDK_PATH)flasher.mk flashburn
 
 flash_OTA:
-	@$(MAKE) -f flasher.mk flash_OTA
+	@$(MAKE) -f $(SDK_PATH)flasher.mk flash_OTA
 
 
 runram: 
-	#JLink-RunRAM.bat
-	@$(MAKE) --f flasher.mk runram
+	@$(MAKE) --f $(SDK_PATH)flasher.mk runram
 
 reset: 
-	#JLink-Reset.bat
-	@$(MAKE) -f flasher.mk reset 
-
-test: 
-	JLink-RTL00ConsoleROM.bat
-	#@make -f flasher.mk test 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk reset 
 
 readfullflash:
-	#JLink-RdFullFlash.bat
-	@$(MAKE) -f flasher.mk readfullflash 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk readfullflash 
 
-.PHONY:	prerequirement
-prerequirement:
-	@$(file >DEPENDENCY_LIST.txt,$(DEPENDENCY_LIST))
-	
\ No newline at end of file
diff --git a/RTL00_SDKV35a/Makefile b/RTL00_SDKV35a/Makefile
new file mode 100644
index 0000000..ac92758
--- /dev/null
+++ b/RTL00_SDKV35a/Makefile
@@ -0,0 +1,39 @@
+include userset.mk
+
+all: ram_all
+mp: ram_all_mp
+
+.PHONY: ram_all
+ram_all:
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk genbin1 genbin23
+
+.PHONY: ram_all_mp
+ram_all_mp:
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk mp
+	@$(MAKE) -f $(SDK_PATH)flasher.mk mp
+	
+.PHONY: clean  clean_all
+clean:
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk clean
+
+clean_all:
+	@$(MAKE) -f $(SDK_PATH)sdkbuild.mk clean_all
+	
+.PHONY: flashburn runram reset test readfullflash flashwebfs
+flashburn: 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk flashburn
+
+flash_OTA:
+	@$(MAKE) -f $(SDK_PATH)flasher.mk flash_OTA
+
+
+runram: 
+	@$(MAKE) --f $(SDK_PATH)flasher.mk runram
+
+reset: 
+	@$(MAKE) -f $(SDK_PATH)flasher.mk reset 
+
+readfullflash:
+	@$(MAKE) -f $(SDK_PATH)flasher.mk readfullflash 
+
diff --git a/RTL00_SDKV35a/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c b/RTL00_SDKV35a/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c
index b2490fd..18233d6 100644
--- a/RTL00_SDKV35a/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c
+++ b/RTL00_SDKV35a/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c
@@ -534,10 +534,3 @@ int __aeabi_fcmpgt(float a, float b)
 {
   return __rtl_fcmpgt_v1_00(a, b);
 }
-
-
-
-
-
-
-
diff --git a/flasher.mk b/RTL00_SDKV35a/flasher.mk
similarity index 91%
rename from flasher.mk
rename to RTL00_SDKV35a/flasher.mk
index fd07669..c58c047 100644
--- a/flasher.mk
+++ b/RTL00_SDKV35a/flasher.mk
@@ -1,6 +1,7 @@
 # RTL8710 Flasher v0.0.alfa
 # pvvx 21.09.2016
--include paths.mk
+include userset.mk
+include $(SDK_PATH)paths.mk
 #---------------------------
 #FLASHER = stlink-v2-1
 #FLASHER = stlink-v2
@@ -133,6 +134,18 @@ flashburn:
 	#@taskkill /F /IM $(JLINK_GDBSRV)
 
 flashwebfs:
+	@echo define call1>$(FLASHER_PATH)file_info.jlink
+	@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/WEBFiles.bin))>>$(FLASHER_PATH)file_info.jlink
+	@echo set '$$'ImageAddr = 0x0D0000>>$(FLASHER_PATH)file_info.jlink
+	@echo end>>$(FLASHER_PATH)file_info.jlink
+	@echo define call2>>$(FLASHER_PATH)file_info.jlink
+	@echo FlasherWrite $(BIN_DIR)/WEBFiles.bin '$$'ImageAddr '$$'ImageSize>>$(FLASHER_PATH)file_info.jlink
+	@echo end>>$(FLASHER_PATH)file_info.jlink
+	@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
+	@$(GDB) -x $(FLASHER_PATH)gdb_wrfile.jlink
+	#@taskkill /F /IM $(JLINK_GDBSRV)
+
+flashespfs:
 	@echo define call1>$(FLASHER_PATH)file_info.jlink
 	@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/webpages.espfs))>>$(FLASHER_PATH)file_info.jlink
 	@echo set '$$'ImageAddr = 0x0D0000>>$(FLASHER_PATH)file_info.jlink
@@ -144,6 +157,7 @@ flashwebfs:
 	@$(GDB) -x $(FLASHER_PATH)gdb_wrfile.jlink
 	#@taskkill /F /IM $(JLINK_GDBSRV)
 
+
 flash_OTA:
 	@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
 	@$(GDB) -x $(FLASHER_PATH)gdb_ota.jlink
@@ -167,9 +181,14 @@ flashimage2p:
 flashwebfs:
 	@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
 	-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
-	-c "rtl8710_flash_write $(BIN_DIR)/ 0xd0000" \
+	-c "rtl8710_flash_write $(BIN_DIR)/WEBFiles.bin 0xd0000" \
 	-c "rtl8710_reboot" -c "reset run" -c shutdown
 
+flashespfs:
+	@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
+	-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
+	-c "rtl8710_flash_write $(BIN_DIR)/webpages.espfs 0xd0000" \
+	-c "rtl8710_reboot" -c "reset run" -c shutdown
 	
 reset:
 #	@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed $(FLASHER_SPEED) flasher/RTLreset.JLinkScript
diff --git a/RTL00_SDKV35a/flasher/RTL00ConsoleROM.JLinkScript b/RTL00_SDKV35a/flasher/RTL00ConsoleROM.JLinkScript
new file mode 100644
index 0000000..5b85200
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL00ConsoleROM.JLinkScript
@@ -0,0 +1,6 @@
+h
+loadbin flasher/RTL00Console_ROM.bin 0x10000ba8
+r
+w4 0x40000210,0x4011117
+g
+q
\ No newline at end of file
diff --git a/RTL00_SDKV35a/flasher/RTL00Console_ROM.bin b/RTL00_SDKV35a/flasher/RTL00Console_ROM.bin
new file mode 100644
index 0000000000000000000000000000000000000000..e83cb165765b0706201fe3e2eb5bfcbadaf693d5
GIT binary patch
literal 600
zcmbO^bJ{ffGiiSg7@uK&ddD!yf{B6Q1UG|#4#R&icnM^G1!6`X1_53mmIPwuO0f=*
zBuFjCRt5zI?-}l@Kyi+(j7V%IBsMb=n+48p-pb;pu#?e^QR#+)8qkbnIVNrX8-?4L
z6jXpb6>t9!|Ba*)ls%MzJQz;grtGWertIPWp}}Q^yJA*S*5a%OSqu~8J%GIIr0m7n
z53(61$O3s+etZy=@woEii{h0ZKMYs6OL<FqNM=g;09im;rHtUp+nX4*e_v!!yH=o-
zA?7i;aD}^=zd{CcC8PGAi#yzffU1-;<O;t&x721}aAam+5MgEz`1Ak2{8L*7hFUik
zhER7FhPj`C;=I7{0^)EWZUSNkCI*LPK)MB}eh-lT1jMl~85nrEf=d#MN)$ZvGD{Sa
z^HWl-6jW1qxfopCLW5lu6b$tAjI9(5DpU<DDzH)rr6ziM=7f|6M+Q5)xr0nK!mbo(
zT(G}$yj!TBbG)k`Obt+!mn$g5N5MHiuQ)#^RUydV*Gd86a9xFhqSWGIh3wQy1@+JZ
dbsYtd)SLnZb$fM?E*qdO3v)vQM>jhL1^~0Mt#SYW

literal 0
HcmV?d00001

diff --git a/RTL00_SDKV35a/flasher/RTL8710.jflash b/RTL00_SDKV35a/flasher/RTL8710.jflash
new file mode 100644
index 0000000..a5d0547
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL8710.jflash
@@ -0,0 +1,119 @@
+  AppVersion = 47812
+[GENERAL]
+  ConnectMode = 0
+  CurrentFile = "fullflash.bin"
+  DataFileSAddr = 0x98000000
+  GUIMode = 0
+  HostName = ""
+  TargetIF = 1
+  USBPort = 0
+  USBSerialNo = 0x00000000
+[JTAG]
+  IRLen = 0
+  MultipleTargets = 0
+  NumDevices = 0
+  Speed0 = 400
+  Speed1 = 12000
+  TAP_Number = 0
+  UseAdaptive0 = 0
+  UseAdaptive1 = 0
+  UseMaxSpeed0 = 0
+  UseMaxSpeed1 = 0
+[CPU]
+  CheckCoreID = 0
+  ChipName = "RTL8710AF"
+  ClockSpeed = 0x00000000
+  Core = 0x030000FF
+  CoreID = 0x00000000
+  CoreIDMask = 0x0F000FFF
+  DeviceFamily = 0x00000003
+  EndianMode = 0
+  HasInternalFlash = 0
+  InitStep0_Action = "Reset"
+  InitStep0_Comment = "Reset and Halt"
+  InitStep0_Value0 = 0x00000000
+  InitStep0_Value1 = 0x00000005
+  InitStep1_Action = "Go"
+  InitStep1_Comment = ""
+  InitStep1_Value0 = 0x00000000
+  InitStep1_Value1 = 0x00000000
+  InitStep2_Action = "Reset"
+  InitStep2_Comment = "Reset and halt target"
+  InitStep2_Value0 = 0x00000000
+  InitStep2_Value1 = 0x00000005
+  InitStep3_Action = "Write Register"
+  InitStep3_Comment = "Only T=1"
+  InitStep3_Value0 = 0x00000010
+  InitStep3_Value1 = 0x01000000
+  InitStep4_Action = "Write 32bit"
+  InitStep4_Comment = "Setup SystemCoreClock"
+  InitStep4_Value0 = 0x40000014
+  InitStep4_Value1 = 0x00000001
+  InitStep5_Action = "Delay"
+  InitStep5_Comment = ""
+  InitStep5_Value0 = 0x00000000
+  InitStep5_Value1 = 0x00000005
+  InitStep6_Action = "Write 32bit"
+  InitStep6_Comment = "Write Page Size"
+  InitStep6_Value0 = 0x1FFFFFF0
+  InitStep6_Value1 = 0x00000100
+  InitStep7_Action = "Write 32bit"
+  InitStep7_Comment = "Write Sector Size"
+  InitStep7_Value0 = 0x1FFFFFF4
+  InitStep7_Value1 = 0x00001000
+  InitStep8_Action = "Write 32bit"
+  InitStep8_Comment = "Write Block Size"
+  InitStep8_Value0 = 0x1FFFFFF8
+  InitStep8_Value1 = 0x00010000
+  InitStep9_Action = "Write 32bit"
+  InitStep9_Comment = "Write Block Count"
+  InitStep9_Value0 = 0x1FFFFFFC
+  InitStep9_Value1 = 0x00000010
+  NumExitSteps = 0
+  NumInitSteps = 10
+  RAMAddr = 0x10000000
+  RAMSize = 0x00010000
+  ScriptFile = ""
+  UseAutoSpeed = 0x00000001
+  UseRAM = 1
+  UseScriptFile = 0
+[FLASH]
+  aSectorSel[0] = 
+  AutoDetect = 1
+  BankName = ""
+  BankSelMode = 1
+  BaseAddr = 0x98000000
+  CheckId = 3
+  CustomRAMCode = "RTL8710AF.hex"
+  DeviceName = "Auto detected flash memory"
+  EndBank = 8191
+  NumBanks = 1
+  OrgNumBits = 16
+  OrgNumChips = 1
+  StartBank = 0
+  UseCustomRAMCode = 1
+[PRODUCTION]
+  AutoPerformsErase = 1
+  AutoPerformsHardLock = 0
+  AutoPerformsHardUnlock = 0
+  AutoPerformsProgram = 1
+  AutoPerformsSecure = 0
+  AutoPerformsSoftLock = 0
+  AutoPerformsSoftUnlock = 1
+  AutoPerformsStartApp = 0
+  AutoPerformsUnsecure = 0
+  AutoPerformsVerify = 1
+  EnableProductionMode = 0
+  EnableTargetPower = 0
+  EraseType = 2
+  ProductionDelay = 0x000001F4
+  ProductionThreshold = 0x00000BB8
+  ProgramSN = 0
+  SerialFile = ""
+  SNAddr = 0x00000000
+  SNInc = 0x00000001
+  SNLen = 0x00000004
+  SNListFile = ""
+  SNValue = 0x00000001
+  TargetPowerDelay = 0x00000014
+  VerifyType = 1
diff --git a/RTL00_SDKV35a/flasher/RTL8710AF.hex b/RTL00_SDKV35a/flasher/RTL8710AF.hex
new file mode 100644
index 0000000..fd2dc4c
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL8710AF.hex
@@ -0,0 +1,130 @@
+:100000007D0439057F05FF056506D506D706000086
+:10001000D44908707047D44800680005FBD0D14827
+:100020000078C0B2704710B5D048006850F44070F6
+:10003000CE490860CE48006850F01000CC490860F6
+:10004000CC480468062000F0B7F934F00600C9492E
+:100050000860C848006850F00100C64908600020E8
+:10006000C54908600020C54908600120C4490860EE
+:100070000220C44908600020C34908600020C34929
+:1000800008600020C249086010BD2DE9F04104005D
+:100090000D001600B6B2002E01D1002048E0B6B225
+:1000A000112E01DB102006004FF4407000F084F99F
+:1000B00080465FF4401000F07FF95FF4403000F0BC
+:1000C0007BF95FF4402000F077F9032010FA08F084
+:1000D00010F44070AF490860B6B2AF480660032024
+:1000E000FFF796FF200CC0B2FFF792FF200AC0B2C4
+:1000F000FFF78EFF2000C0B2FFF78AFF01209E4964
+:100100000860002007003800310080B289B28842C0
+:1001100005D2FFF780FFBFB2E8557F1CF3E79F4889
+:100120000068C007FBD4002093490860300080B20B
+:10013000BDE8F08138B54FF4407000F03DF905009E
+:100140005FF4401000F038F95FF4403000F034F90B
+:100150005FF4402000F030F90320A84010F4407014
+:100160008C49086003208C4908600120824908609E
+:100170009F20FFF74DFFFFF74EFF0400FFF74BFFF7
+:1001800054EA00200400FFF746FF54EA0040040050
+:1001900082480068C007FBD400207749086020002F
+:1001A00032BD38B54FF4407000F006F905005FF439
+:1001B000401000F001F95FF4403000F0FDF85FF40A
+:1001C000402000F0F9F80320A84010F44070714975
+:1001D0000860012070490860012067490860052017
+:1001E000FFF716FFFFF717FF04006C480068C00711
+:1001F000FBD40020604908602000C0B232BD38B591
+:1002000004004FF4407000F0D7F805005FF4401090
+:1002100000F0D2F85FF4403000F0CEF85FF44020F8
+:1002200000F0CAF80120A84010F440705949086055
+:100230000120514908602000C0B2FFF7E9FE57488D
+:100240000068C007FBD400204B49086031BD38B5B9
+:1002500004004FF4407000F0AFF805005FF4401068
+:1002600000F0AAF85FF4403000F0A6F85FF44020F8
+:1002700000F0A2F80120A84010F440704549086041
+:1002800001203D4908602020FFF7C2FE200CC0B2CB
+:10029000FFF7BEFE200AC0B2FFF7BAFE2000C0B2D0
+:1002A000FFF7B6FE3D480068C007FBD40020324986
+:1002B000086031BD2DE9F04104000D001600B6B212
+:1002C000002E01D100204BE0B6B2B6F5807F02DDF2
+:1002D0004FF4807006004FF4407000F06DF88046D7
+:1002E0005FF4401000F068F85FF4403000F064F80C
+:1002F0005FF4402000F060F8012010FA08F010F4DC
+:1003000040702449086001201B4908600220FFF763
+:100310007FFE200CC0B2FFF77BFE200AC0B2FFF7C1
+:1003200077FE2000C0B2FFF773FE00200700380000
+:10033000310080B289B2884205D2BFB2E85DFFF7D2
+:1003400067FE7F1CF3E7154800684007FBD513489C
+:100350000068C007FBD4002007490860300080B265
+:10036000BDE8F08160600040246000403002004041
+:1003700010020040C0020040086000402C600040B5
+:100380001060004014600040186000401C60004095
+:100390004C60004000600040046000402860004065
+:1003A00080B5FFF7FEFEC007FBD401BD80B5FFF7A7
+:1003B000F8FE8007FBD501BD90FAA0F0B0FA80F0FE
+:1003C00070470000010051EA510151EA910151EAE0
+:1003D000111151EA112151EA1141064A7A441432AD
+:1003E000DFF8B03203FB01F3DB0E52F823201000DC
+:1003F000704700BF80030000DFF89C02006850F0E7
+:100400004070DFF894120860DFF89002006850F442
+:100410008070DFF888120860FF20DFF8841208601F
+:10042000FF20DFF880120860704780B500F054F9B3
+:1004300001BD0120DFF870120860704780B571B609
+:1004400072B6FFF7F6FFFFF7D7FFFFF7EEFF01BD2C
+:1004500080B5FFF7E8FDFFF7A3FFFFF76BFEFFF79F
+:100460009FFF92480068FFF7ADFF914908609148EF
+:100470000068FFF7A7FF9049086001BDF8B50400C8
+:100480000D0016008D4800688D49884204D18D48C2
+:1004900000688D49884209D08948884908608A489F
+:1004A00088490860FFF7CAFFFFF7D2FF814800685C
+:1004B00086490968864A12685143B1FBF0F27368B5
+:1004C00040271F807A4F3F689F700027DF70012709
+:1004D0001F7101275F7100279F710127DF710127BD
+:1004E0001F7200275F7201279F7201271F6100277B
+:1004F000DFF8DCC1DCF800C067451CD2DFF8CCC1F6
+:10050000DCF800C00CFB07FC5FF00C0E0EFB07FED6
+:100510009E44CEF814C05FF00C0C0CFB07FC9C440E
+:10052000CCF818205FF00C0C0CFB07FC9C44CCF8BA
+:100530001C007F1CDCE7F1BD2DE9F04704000D0035
+:1005400016007769D6F81080D6F80490002F14D0E2
+:10055000200000F0C0F8112F02D35FF0100A00E075
+:10056000BA46524692B249464046FFF78EFD1AEB14
+:100570000808D144B7EB0A07E8E7BDE8F0872DE9A2
+:10058000F84F04000D0016000020286077694848E5
+:100590000068B84638FA00F8D6F810904448006869
+:1005A00039FA00F9D6F804A0B8F1000F25D0B7F554
+:1005B000807F02D94FF4807B00E0BB46FFF7F0FE5E
+:1005C0000620FFF71CFEFFF7F1FE5A4692B2514695
+:1005D0003648006800FB09F0FFF76CFEFFF7E0FE0D
+:1005E0000420FFF70CFEFFF7DBFEDA44B7EB0B0746
+:1005F000B8F1010819F10109D6E7BDE8F18F2DE93D
+:10060000F84304000D00160030692B490968C84002
+:10061000070070698046002028602648006800FBBB
+:1006200007F08146B8F1000F1AD0200000F053F80F
+:10063000FFF7B6FE0620FFF7E2FDFFF7B7FE4846DC
+:10064000FFF705FEFFF7ACFE0420FFF7D8FDFFF72C
+:10065000A7FE1848006810EB0909B8F10108E1E7A6
+:10066000BDE8F18310B504001448006814498842BD
+:1006700004D1144800681449884209D010480F4931
+:10068000086011480F490860FFF7D8FEFFF7E0FE49
+:1006900010BD0000DDACC407300200401C02004069
+:1006A000200300402403004014000040F0FFFF1F1F
+:1006B000E0FFFF1FF4FFFF1FE4FFFF1FE8FFFF1F26
+:1006C000AA55AA55ECFFFF1F55AA55AAF8FFFF1F10
+:1006D000FCFFFF1F7047704710B51E48006850F4BC
+:1006E00040501C4908601C48006850F480501A496A
+:1006F00008601A4800684006FBD5194804685FF492
+:100700004000FFF759FE34F44000154908601448D2
+:10071000006850F4801012490860002011490860F8
+:100720001148006850F080000F49086044200F49CC
+:10073000086000200B49086003240320FFF73CFEFB
+:1007400014FA00F010F0030007490860002008497F
+:10075000086010BD3002004010020040143000401C
+:10076000C0020040043000400C3000400030004027
+:1007700008300040000000000900000001000000F7
+:100780000A0000000D00000015000000020000003B
+:100790001D0000000B0000000E0000001000000013
+:1007A0001200000016000000190000000300000005
+:1007B0001E000000080000000C00000014000000F3
+:1007C0001C0000000F0000001100000018000000D5
+:1007D00007000000130000001B00000017000000CD
+:1007E000060000001A0000000500000004000000E0
+:0407F0001F000000E6
+:0400000500000000F7
+:00000001FF
diff --git a/RTL00_SDKV35a/flasher/RTL_FFlash.JLinkScript b/RTL00_SDKV35a/flasher/RTL_FFlash.JLinkScript
new file mode 100644
index 0000000..a9ed900
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL_FFlash.JLinkScript
@@ -0,0 +1,17 @@
+h
+r
+w4 0x40000230,0x0000D3C4
+w4 0x40000210,0x00200113
+w4 0x400002C0,0x00110001
+w4 0x40006008,0
+w4 0x4000602C,0
+w4 0x40006010,1
+w4 0x40006014,2
+w4 0x40006018,0
+w4 0x4000601C,0
+w4 0x4000604C,0
+savebin fullflash.bin 0x98000000 0x100000
+w4 0x40000210,0x211157
+r
+g
+q
\ No newline at end of file
diff --git a/RTL00_SDKV35a/flasher/RTL_RdROM.JLinkScript b/RTL00_SDKV35a/flasher/RTL_RdROM.JLinkScript
new file mode 100644
index 0000000..d57dabd
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL_RdROM.JLinkScript
@@ -0,0 +1,11 @@
+r0
+trst0
+r1
+trst1
+h
+r
+savebin bios-rom.bin 0x00000000 0x100000
+w4 0x40000210,0x211157
+r
+g
+q
\ No newline at end of file
diff --git a/RTL00_SDKV35a/flasher/RTL_Reset.JLinkScript b/RTL00_SDKV35a/flasher/RTL_Reset.JLinkScript
new file mode 100644
index 0000000..196d12a
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL_Reset.JLinkScript
@@ -0,0 +1,9 @@
+r0
+trst0
+r1
+trst1
+h
+r
+w4 0x40000210,0x111157
+g
+q
\ No newline at end of file
diff --git a/RTL00_SDKV35a/flasher/RTL_RunRAM.JLinkScript b/RTL00_SDKV35a/flasher/RTL_RunRAM.JLinkScript
new file mode 100644
index 0000000..5991456
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/RTL_RunRAM.JLinkScript
@@ -0,0 +1,12 @@
+r0
+trst0
+r1
+trst1
+h
+r
+loadbin build/bin/ram_1.r.bin 0x10000bc8
+loadbin build/bin/ram_2.bin 0x10006000
+r
+w4 0x40000210,0x20111157
+g
+q
\ No newline at end of file
diff --git a/DAPLink-RTL00Console.bat b/RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RTL00Console.bat
similarity index 100%
rename from DAPLink-RTL00Console.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RTL00Console.bat
diff --git a/DAPLink-RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RdFullFlash.bat
similarity index 100%
rename from DAPLink-RdFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-RdFullFlash.bat
diff --git a/DAPLink-Reset.bat b/RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-Reset.bat
similarity index 100%
rename from DAPLink-Reset.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/DAPLink-Reset.bat
diff --git a/DAPLink_WrFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/DAPLink_WrFullFlash.bat
similarity index 100%
rename from DAPLink_WrFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/DAPLink_WrFullFlash.bat
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RTL00ConsoleROM.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RTL00ConsoleROM.bat
new file mode 100644
index 0000000..d8488c6
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RTL00ConsoleROM.bat
@@ -0,0 +1,3 @@
+@echo off
+call paths.bat
+start JLink.exe -Device CORTEX-M3 -If SWD -Speed 4000 flasher\RTL00ConsoleROM.JLinkScript
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RdFullFlash.bat
new file mode 100644
index 0000000..de5d955
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RdFullFlash.bat
@@ -0,0 +1,3 @@
+@echo off
+call paths.bat
+JLink.exe -Device CORTEX-M3 -If SWD -Speed 10000 flasher/RTL_FFlash.JLinkScript
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/JLink-Reset.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-Reset.bat
new file mode 100644
index 0000000..51ea2a8
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-Reset.bat
@@ -0,0 +1,3 @@
+@echo off
+call paths.bat
+JLink.exe -Device CORTEX-M3 -If SWD -Speed 1000 flasher\RTL_Reset.JLinkScript
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RunRAM.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RunRAM.bat
new file mode 100644
index 0000000..4282a8e
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/JLink-RunRAM.bat
@@ -0,0 +1,3 @@
+@echo off
+call paths.bat
+start JLink.exe -Device CORTEX-M3 -If SWD -Speed 4000 flasher\RTL_RunRAM.JLinkScript
diff --git a/JLinkGDB-RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RdFullFlash.bat
similarity index 100%
rename from JLinkGDB-RdFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RdFullFlash.bat
diff --git a/JLinkGDB-RunRAM.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RunRAM.bat
similarity index 100%
rename from JLinkGDB-RunRAM.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-RunRAM.bat
diff --git a/JLinkGDB-WrFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-WrFlash.bat
similarity index 100%
rename from JLinkGDB-WrFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB-WrFlash.bat
diff --git a/JLinkGDBServer.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDBServer.bat
similarity index 100%
rename from JLinkGDBServer.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDBServer.bat
diff --git a/JLinkGDB_OTA.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB_OTA.bat
similarity index 100%
rename from JLinkGDB_OTA.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkGDB_OTA.bat
diff --git a/JLinkOCD-RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLinkOCD-RdFullFlash.bat
similarity index 100%
rename from JLinkOCD-RdFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLinkOCD-RdFullFlash.bat
diff --git a/JLink_RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JLink_RdFullFlash.bat
similarity index 100%
rename from JLink_RdFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JLink_RdFullFlash.bat
diff --git a/JlinkOpenOCD.bat b/RTL00_SDKV35a/flasher/add_sample_bat/JlinkOpenOCD.bat
similarity index 100%
rename from JlinkOpenOCD.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/JlinkOpenOCD.bat
diff --git a/STLink-RdFullFlash.bat b/RTL00_SDKV35a/flasher/add_sample_bat/STLink-RdFullFlash.bat
similarity index 100%
rename from STLink-RdFullFlash.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/STLink-RdFullFlash.bat
diff --git a/STLink-Reset.bat b/RTL00_SDKV35a/flasher/add_sample_bat/STLink-Reset.bat
similarity index 100%
rename from STLink-Reset.bat
rename to RTL00_SDKV35a/flasher/add_sample_bat/STLink-Reset.bat
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/ameba_tools.py b/RTL00_SDKV35a/flasher/add_sample_bat/ameba_tools.py
new file mode 100644
index 0000000..99e62c1
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/ameba_tools.py
@@ -0,0 +1,40 @@
+import jlinkarm as jl
+
+def loaddll(dll_path):
+    jl.loadJLinkARMdll(dll_path)
+    jl.open()
+    if jl.is_connected == 0:
+       raise RuntimeError('Jlink not connected')
+    jl.exec_command('device Cortex-M3', 0, 0)
+    jl.exec_command('endian little', 0, 0)
+    jl.tif_select(1)
+    jl.set_speed(1000)
+    jl.clear_RESET()
+    jl.clear_TRST()
+    time.sleep(0.01)
+    jl.set_RESET()
+    jl.set_TRST()
+    jl.reset()
+    jl.halt()
+    jl.set_speed(3500)
+
+def ram_all(binfile, image1=True, image2=True):
+    bin = None
+    with file(binfile, 'rb') as f:
+        bin = f.read()
+    get_dword = lambda address: struct.unpack('<L', bin[address:address + 4])[0]
+
+    if image1:
+        i1_address = 0x0
+        i1_length = get_dword(0x10)
+        jl.write_mem(0x10000bc8, bin[i1_address + 0x20: i1_address + 0x20 + i1_length])
+
+    if image2:
+        i2_address = (get_dword(0x18) & 0xffff) * 1024
+        i2_length = get_dword(i2_address) + 0x10
+        jl.write_mem(0x10006000, bin[i2_address + 0x10: i2_address + 0x10 + i2_length])
+
+    jl.reset()
+    jl.write_u32(0x40000210, 0x20111113)
+    jl.go()
+    jl.close()
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/jlinkarm.py b/RTL00_SDKV35a/flasher/add_sample_bat/jlinkarm.py
new file mode 100644
index 0000000..b856da1
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/jlinkarm.py
@@ -0,0 +1,113 @@
+import ctypes
+
+_jl = None
+
+def loadJLinkARMdll(lib_str):
+    global _jl
+    _jl = ctypes.cdll.LoadLibrary(lib_str)
+    if _jl:
+        return _jl
+    else:
+        raise RuntimeError('JLink ARM dynamic library is not loaded')
+
+def _jlink():
+    if _jl:
+        return _jl
+    else:
+        raise RuntimeError('JLink ARM dynamic library is not loaded')
+
+def open():
+    r = _jlink().JLINKARM_Open()
+    if r != 0: raise RuntimeError('Adapter is not found')
+
+def exec_command(cmd, a, b):
+    r = _jlink().JLINKARM_ExecCommand(cmd, a, b)
+    #if r != 0: raise RuntimeError('Unable to execute command')
+
+def tif_select(n):
+    if not isinstance(n, ctypes.c_ulong):
+        n = ctypes.c_ulong(n)
+    r = _jlink().JLINKARM_TIF_Select(n)
+    if r != 0: raise RuntimeError('Unable to select TIF')
+
+def set_speed(speed):
+    if not isinstance(speed, ctypes.c_ulong):
+        speed = ctypes.c_ulong(speed)
+    r = _jlink().JLINKARM_SetSpeed(speed)
+    #if r != 0: raise RuntimeError('Unable to set speed')
+
+def reset():
+    r = _jlink().JLINKARM_Reset()
+    if r != 0: raise RuntimeError('fail')
+
+def is_connected():
+    if _jlink().JLINKARM_IsConnected() != 0: return True
+    else: return False
+
+def go():
+    r = _jlink().JLINKARM_Go()
+    #if r != 0: raise RuntimeError('fail')
+
+def write_u32(r, val):
+    if not isinstance(val, ctypes.c_ulong):
+        val = ctypes.c_ulong(val)
+    r = _jlink().JLINKARM_WriteU32(r, val)
+    if r != 0: raise RuntimeError('fail')
+
+def read_reg(r):
+    return _jlink().JLINKARM_ReadReg(r)
+
+def write_reg(r, val):
+    if not isinstance(val, ctypes.c_ulong):
+        val = ctypes.c_ulong(val)
+    ret = _jlink().JLINKARM_WriteReg(r, val)
+    #if ret != 0: raise RuntimeError('fail')
+
+def get_speed():
+    return _jlink().JLINKARM_GetSpeed()
+
+def write_mem(startaddress, buf):
+    _jlink().JLINKARM_WriteMem.argtypes = [ctypes.c_int, ctypes.c_int, ctypes.c_char_p]
+    _jlink().JLINKARM_WriteMem.restype = ctypes.c_int
+    print "writemem addr %s size %s" % (hex(startaddress), hex(len(buf)))
+    r = _jlink().JLINKARM_WriteMem(startaddress, len(buf), buf)
+    #if r != 0: raise RuntimeError('fail')
+
+def read_mem_U32(startaddress, count):
+    buftype=ctypes.c_uint32 * int(count)
+    buf=buftype()
+    r=_jlink().JLINKARM_ReadMemU32(startaddress, count, buf, 0)
+    #if r != 0: raise RuntimeError('fail')
+    return buf
+
+def close():
+    r = _jlink().JLINKARM_Close()
+    #if r != 0: raise RuntimeError('fail')
+
+def clear_TCK():
+    r = _jlink().JLINKARM_ClrTCK()
+def set_TCK():
+    r = _jlink().JLINKARM_SetTCK()
+
+def clear_TMS():
+    r = _jlink().JLINKARM_ClrTMS()
+def set_TMS():
+    r = _jlink().JLINKARM_SetTMS()
+
+def clear_TDI():
+    r = _jlink().JLINKARM_ClrTDI()
+def set_TDI():
+    r = _jlink().JLINKARM_SetTDI()
+
+def clear_TRST():
+    r = _jlink().JLINKARM_ClrTRST()
+def set_TRST():
+    r = _jlink().JLINKARM_SetTRST()
+
+def clear_RESET():
+    r = _jlink().JLINKARM_ClrRESET()
+def set_RESET():
+    r = _jlink().JLINKARM_SetRESET()
+
+def halt():
+    r = _jlink().JLINKARM_Halt()
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/paths.bat b/RTL00_SDKV35a/flasher/add_sample_bat/paths.bat
new file mode 100644
index 0000000..374f93e
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/paths.bat
@@ -0,0 +1 @@
+PATH=D:\MCU\GNU_Tools_ARM_Embedded\5.4_2016q2\bin;D:\MCU\SEGGER\JLink_V612i;%PATH%
\ No newline at end of file
diff --git a/RTL00_SDKV35a/flasher/add_sample_bat/runram.py b/RTL00_SDKV35a/flasher/add_sample_bat/runram.py
new file mode 100644
index 0000000..c4c3cb3
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/add_sample_bat/runram.py
@@ -0,0 +1,53 @@
+#!/usr/bin/env python3
+# -*- coding: cp1251 -*-
+import jlinkarm as jl
+import os, sys, time, struct
+
+dllfilename = 'D:/MCU/SEGGER/JLink_V612i/JLinkARM.dll'
+
+if __name__ == '__main__':
+	if len(sys.argv) >= 2:
+		if sys.argv[1] == '-h':
+			print 'Usage: ldram.py ram_all.bin'
+			exit(0)
+	imgfilename = 'build/bin/ram_all.bin'
+
+	if len(sys.argv) > 1: 
+		if sys.argv[1]:
+			imgfilename = sys.argv[1]
+	try:
+		ff = open(imgfilename, "rb")
+	except:
+		print "Error file open " + imgfilename
+		exit(1)
+	jl.loadJLinkARMdll(dllfilename)
+	jl.open()
+	if jl.is_connected == 0:
+		raise RuntimeError('Jlink not connected')
+	jl.exec_command('device Cortex-M3', 0, 0)
+	jl.exec_command('endian little', 0, 0)
+	jl.tif_select(1)
+	jl.set_speed(1000)
+	jl.clear_RESET()
+	jl.clear_TRST()
+	time.sleep(0.01)
+	jl.set_RESET()
+	jl.set_TRST()
+	jl.reset()
+	jl.halt()
+	jl.set_speed(3500)
+	bin = ff.read()
+	get_dword = lambda address: struct.unpack('<L', bin[address:address + 4])[0]
+	i1_address = 0x0
+	i1_length = get_dword(0x10)
+	jl.write_mem(0x10000bc8, bin[i1_address + 0x20: i1_address + 0x20 + i1_length])
+	i2_address = (get_dword(0x18) & 0xffff) * 1024
+	i2_length = get_dword(i2_address) + 0x10
+	jl.write_mem(0x10006000, bin[i2_address + 0x10: i2_address + 0x10 + i2_length])
+	jl.reset()
+	jl.write_u32(0x40000210, 0x20111113)
+	jl.go()
+	jl.close()
+
+	ff.close()
+	exit(0)
diff --git a/RTL00_SDKV35a/flasher/ameba1.cfg b/RTL00_SDKV35a/flasher/ameba1.cfg
new file mode 100644
index 0000000..f3ee2db
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/ameba1.cfg
@@ -0,0 +1,124 @@
+# Main file for Ameba1 series Cortex-M3 parts
+#
+# !!!!!!
+#
+
+set CHIPNAME rtl8195a
+set CHIPSERIES ameba1
+
+# Adapt based on what transport is active.
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	error "CHIPNAME not set. Please do not include ameba1.cfg directly."
+}
+
+if { [info exists CHIPSERIES] } {
+	# Validate chip series is supported
+	if { $CHIPSERIES != "ameba1" } {
+		error "Unsupported chip series specified."
+	}
+	set _CHIPSERIES $CHIPSERIES
+} else {
+	error "CHIPSERIES not set. Please do not include ameba1.cfg directly."
+}
+
+if { [info exists CPUTAPID] } {
+	# Allow user override
+	set _CPUTAPID $CPUTAPID
+} else {
+	# Ameba1 use a Cortex M3 core.
+	if { $_CHIPSERIES == "ameba1" } {
+		if { [using_jtag] } {
+			set _CPUTAPID 0x4ba00477
+		} {
+			set _CPUTAPID 0x2ba01477
+		}
+	}
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+
+
+# Run with *real slow* clock by default since the
+# boot rom could have been playing with the PLL, so
+# we have no idea what clock the target is running at.
+adapter_khz 1000
+
+# delays on reset lines
+adapter_nsrst_delay 200
+if {[using_jtag]} {
+ jtag_ntrst_delay 200
+}
+
+
+# Ameba1 (Cortex M3 core) support SYSRESETREQ
+if {![using_hla]} {
+    # if srst is not fitted use SYSRESETREQ to
+    # perform a soft reset
+    cortex_m reset_config sysresetreq
+}
+
+$_TARGETNAME configure -event reset-init {ameba1_init}
+
+# Ameba1 SDRAM enable
+proc ameba1_init { } {
+	# init System
+	mww 0x40000014 0x00000021
+	sleep 10
+	mww	0x40000304 0x1fc00002
+	sleep 10
+	mww 0x40000250 0x00000400
+	sleep 10
+	mww 0x40000340 0x00000000
+	sleep 10
+	mww 0x40000230 0x0000dcc4
+	sleep 10
+	mww 0x40000210 0x00011117
+	sleep 10
+	mww 0x40000210 0x00011157
+	sleep 10
+	mww 0x400002c0 0x00110011
+	sleep 10
+	mww 0x40000320 0xffffffff
+	sleep 10
+	# init SDRAM
+	mww 0x40000040 0x00fcc702
+	sleep 10
+	mdw 0x40000040
+	mww 0x40005224 0x00000001
+	sleep 10
+	mww 0x40005004 0x00000208
+	sleep 10
+	mww 0x40005008 0xffffd000
+	sleep 13
+	mww 0x40005020 0x00000022
+	sleep 13
+	mww 0x40005010 0x09006201
+	sleep 13
+	mww 0x40005014 0x00002611
+	sleep 13
+	mww 0x40005018 0x00068413
+	sleep 13
+	mww 0x4000501c 0x00000042
+	sleep 13
+	mww 0x4000500c 0x700 		;# set Idle
+	sleep 20
+	mww 0x40005000 0x1 			;# start init
+	sleep 100
+	mdw 0x40005000			
+	mww 0x4000500c 0x600		;# enter memory mode
+	sleep 30
+
+	mww 0x40005008 0x00000000	;# 0xf00
+	;# mww 0x40005008 0x00000f00
+	sleep 3
+	mww 0x40000300 0x0006005e	;# 0x5e
+	;# mww 0x40000300 0x0000005e
+	sleep 3
+}
diff --git a/RTL00_SDKV35a/flasher/cortex.ocd b/RTL00_SDKV35a/flasher/cortex.ocd
new file mode 100644
index 0000000..b0cdf18
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/cortex.ocd
@@ -0,0 +1,99 @@
+proc cortex_bootstrap {start} {
+	# disable interrupts
+	reg faultmask 0x01
+	set vectors ""
+	mem2array vectors 32 $start 2
+	reg sp $vectors(0)
+	reg pc $vectors(1)
+	resume
+}
+
+proc cortex_reboot {} {
+	set ddd [ format "0x%08x" [ rtl8710_flasher_mrw [ expr 0x40000210 ] ] ]
+#	set aaa [ format "0x%08x" [ expr 0x40000210 ] ]
+	echo "CLK_CTRL1 = $ddd"
+#	echo "# Set processor clock to default before system reset"
+	set ddd [ format "0x%08x" [ rtl8710_flasher_mrw [ expr 0x40000014 ] ] ]
+#	set aaa [ format "0x%08x" [ expr 0x40000014 ] ]
+	echo "SOC_FUNC_EN = $ddd"
+#	mww 0x40000014 0x00000021
+	sleep 10
+	echo "# Reboot (system reset)"
+	mww 0xE000ED0C 0x05FA0007
+}
+
+proc init_system {} {
+# Set processor clock to default before system reset
+# CLK_CTRL1
+#	mww 0x40000014 0x00000011 
+	mww 0x40000014 0x00000021 
+	sleep 10
+# PESOC_SOC_CTRL	
+#	mww 0x40000304 0x1fc00001	
+	mww 0x40000304 0x1fc00002	
+	sleep 10
+# PESOC_CLK_SEL	
+	mww 0x40000250 0x00000400
+	sleep 10
+# GPIO_PULL_CTRL4	
+	mww 0x40000340 0x00000000
+	sleep 10
+# PESOC_CLK_CTRL
+#	mww 0x40000230 0x0000d3c4
+	mww 0x40000230 0x0000dcc4
+	sleep 10
+# SOC_FUNC_EN: FUN|OCP|LXBUS|FLASH|CPU|LOG_UART|GTIMER|SECURITY_ENGINE	
+#	mww 0x40000210 0x00211117
+	mww 0x40000210 0x00011117
+	sleep 10
+# SOC_FUNC_EN: FUN|OCP|LXBUS|FLASH|CPU|LOG_UART|GTIMER|SECURITY_ENGINE + MEM_CTRL	
+	mww 0x40000210 0x00011157
+	sleep 10
+# CPU_PERIPHERAL_CTRL SPI_FLASH_PIN_EN|SDR_PIN_EN|SWD_PIN_EN|LOG_UART_PIN_EN ?
+#	mww 0x400002c0 0x00110000
+	mww 0x400002c0 0x00110011
+	sleep 10
+# GPIO_SHTDN_CTRL	
+#	mww 0x40000320 0x00000033
+	mww 0x40000320 0xffffffff
+	sleep 10
+
+	mww 0x40005008 0x00000000
+	sleep 10
+# PESOC_MEM_CTRL	
+	mww 0x40000300 0x0006005e
+	sleep 10
+		
+	# set baudrate to 38400
+#	mww 0x40003010 0x00000080 
+#	mww 0x40003008 0x00000022 
+#	mww 0x4000300C 0x00000000 
+#	mww 0x40003010 0x00000000 
+}
+
+proc boot_from_flash {} {
+	echo "# skip sdram init, it has been init in openocd config"
+	mww 0x40000210 0x211157
+}
+
+proc boot_from_ram {} {
+	echo "# boot from ram, igonore loading flash"
+	mww 0x40000210 0x8011157
+}
+
+proc restart_from_falsh {} {
+	init
+	init_system
+	boot_from_flash
+	cortex_reboot
+}
+
+proc load_ram_binary { local_filename address } {
+#	set address 0x10000BC8
+	init 
+	reset halt
+	set size [file size $local_filename]
+	load_image $local_filename $address bin $address $size
+	boot_from_ram
+	resume
+}
diff --git a/RTL00_SDKV35a/flasher/flash_file.jlink b/RTL00_SDKV35a/flasher/flash_file.jlink
new file mode 100644
index 0000000..83b04c0
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/flash_file.jlink
@@ -0,0 +1,9 @@
+define call1
+SetFirwareSize build/bin/ram_all.bin
+end
+define call2
+FlasherWrite build/bin/ram_all.bin 0 $Image1Size
+end
+define call3
+FlasherWrite build/bin/ram_all.bin $Image2Addr $Image2Size
+end
diff --git a/RTL00_SDKV35a/flasher/gdb_flasher.jlink b/RTL00_SDKV35a/flasher/gdb_flasher.jlink
new file mode 100644
index 0000000..f3aa851
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_flasher.jlink
@@ -0,0 +1,198 @@
+####################################
+# J-LINK GDB SERVER initialization #
+####################################
+define InitJlink
+printf "Jlink Init:\n"
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+#set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+target remote localhost:2331
+set remotetimeout 10000
+monitor device Cortex-M3
+monitor endian little
+monitor reset
+# Set max speed
+monitor speed 4000
+set mem inaccessible-by-default off
+# Setup GDB FOR FASTER DOWNLOADS
+set remote memory-write-packet-size 8192
+set remote memory-write-packet-size fixed
+end
+#############
+# Boot_Flash
+define SetBootFlash
+printf "SetBoot = Flash:\n"
+monitor long 0x40000210 = 0x211157
+end
+# Boot RAM start_addr0() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x80000000 ) 
+define SetBootCall0
+printf "SetBoot = Call0:\n"
+monitor long 0x40000210 = 0x80111157
+end
+# Boot RAM start_addr1() Run if ( v40000210 & 0x20000000 ) 
+define SetBootCall1
+printf "SetBoot = Call1:\n"
+monitor long 0x40000210 = 0x20111157
+end
+# Boot RAM start_addr2() Run if ( v40000210 & 0x10000000 )
+define SetBootCall2
+printf "SetBoot = Call2:\n"
+monitor long 0x40000210 = 0x10111157
+end
+# Boot RAM start_addr3() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x8000000 )
+define SetBootCall3
+printf "SetBoot = Call3:\n"
+monitor long 0x40000210 = 0x8111157
+end
+# Boot RAM start_addr4() Init console, Run if ( v40000210 & 0x4000000 )
+define SetBootCall4
+printf "SetBoot = Call4:\n"
+monitor long 0x40000210 = 0x4111157
+end
+# CPU CLK 166 MHz?
+define SetClk166MHz
+printf "SetCLK 166.66MHz:\n"
+monitor long 0x40000014 = 0x00000011 
+end
+# CPU CLK 83 MHz?
+define SetClk83MHz
+printf "SetCLK 83.33MHz:\n"
+monitor long 0x40000014 = 0x00000021 
+end
+###############
+# System Init #
+###############
+define SystemInit
+printf "System Init:\n"
+monitor long 0x40000304 = 0x1FC00002
+monitor long 0x40000250 = 0x400
+monitor long 0x40000340 = 0x0
+monitor long 0x40000230 = 0xdcc4
+monitor long 0x40000210 = 0x11117
+monitor long 0x40000210 = 0x11157
+monitor long 0x400002c0 = 0x110011
+monitor long 0x40000320 = 0xffffffff
+end
+############
+# SPI Init #
+############
+define SPI_Init
+printf "Init SPI:\n"
+#enable spi flash peripheral clock
+set $Temp = {int}(0x40000230)
+set $Temp = ($Temp | 0x300)
+set {int}(0x40000230) = $Temp
+#enable spi flash peripheral
+set $Temp = {int}(0x40000210)
+set $Temp = ($Temp | 0x10)
+set {int}(0x40000210) = $Temp
+#select spi flash pinout (0 - internal), enable spi flash pins 
+set $Temp = {int}(0x400002C0)
+set $Temp = (($Temp & 0xFFFFFFF8) | 1)
+set {int}(0x400002C0) = $Temp
+#disable SPI FLASH operation
+monitor long 0x40006008 = 0
+#disable all interrupts
+monitor long 0x4000602C = 0
+#use first "slave select" pin
+monitor long 0x40006010 = 1
+#baud rate, default value
+monitor long 0x40006014 = 2
+#tx fifo threshold
+monitor long 0x40006018 = 0
+#rx fifo threshold
+monitor long 0x4000601C = 0
+#disable DMA
+monitor long 0x4000604C = 0
+set $SPI_FLASH_BASE = 0x98000000
+end
+###################
+# SetFirwareSize #
+###################
+define SetFirwareSize
+set $rambuffer = 0x10000300
+printf "Get ImagesSize:\n"
+restore $arg0 binary $rambuffer 0 0x20
+set $Image1Size = {int}($rambuffer+0x10) + 32
+set $Image1LoadAddr = {int}($rambuffer+0x14)
+set $Image2Addr = {short}($rambuffer+0x18) * 1024
+if $Image1Size != 0 && $Image1Size < 0x1000000
+ if $Image2Addr == 0 
+  set $Image2Addr = $Image1Size
+ end 
+ printf "Image1Size = %d\n", $Image1Size
+ printf "Image1LoadAddr = 0x%08x\n", $Image1LoadAddr
+ printf "Image2FlashAddr = 0x%08x\n", $Image2Addr
+ set $parms1 = $rambuffer - $Image2Addr
+ set $parms3 = $Image2Addr + 0x08
+ restore $arg0 binary $parms1 $Image2Addr $parms3
+ set $Image2Size = {int}($rambuffer)
+ set $Image2LoadAddr = {int}($rambuffer+0x4)
+ if $Image2Size != 0xFFFFFFFF && $Image2Size != 0
+  set $Image2Size = $Image2Size + 16
+  printf "Image2Size = %d\n", $Image2Size
+  printf "Image2LoadAddr = 0x%08x\n", $Image2LoadAddr
+  set $FirmwareSize = $Image2Addr + $Image2Size
+  printf "FirmwareSize = %d\n", $FirmwareSize
+ else
+  set $Image2Size = 0
+  printf "Image2 - None\n"
+  set $FirmwareSize = $Image1Size
+  printf "FirmwareSize = %d\n", $FirmwareSize
+ end
+else
+ set $Image1Size = 0
+ set $Image2Size = 0
+ set $Image2Addr = 0
+ set $FirmwareSize = 0
+ printf "Image not format Firmware!\n"
+end 
+end
+#####################
+# Flash Images Info #
+#####################
+define FlashImagesInfo
+printf "Flash Info:\n"
+set $Image1Size = {int}($SPI_FLASH_BASE + 0x10) + 32
+set $Image1LoadAddr = {int}($SPI_FLASH_BASE + 0x14)
+if $Image1LoadAddr == 0xFFFFFFFF
+printf "Image1 - None\n"
+else
+set $Image2FlashAddr = {short}($SPI_FLASH_BASE + 0x18) * 1024
+if $Image2FlashAddr == 0 
+$Image2FlashAddr = $Image1Size 
+end 
+set $Image2Size = {int}($Image2FlashAddr + $SPI_FLASH_BASE)
+set $Image2LoadAddr = {int}($Image2FlashAddr + $SPI_FLASH_BASE + 0x4)
+printf "Image1Size = %d\n", $Image1Size
+printf "Image1LoadAddr = 0x%08x\n", $Image1LoadAddr
+printf "Image2FlashAddr = 0x%08x\n", $Image2FlashAddr
+if $Image2Size != 0xFFFFFFFF
+printf "Image2Size = %d\n", $Image2Size
+printf "Image2LoadAddr = 0x%08x\n", $Image2LoadAddr
+else
+printf "Image2 - None\n"
+end
+end
+end
diff --git a/RTL00_SDKV35a/flasher/gdb_init.jlink b/RTL00_SDKV35a/flasher/gdb_init.jlink
new file mode 100644
index 0000000..0ffc247
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_init.jlink
@@ -0,0 +1,30 @@
+#
+# J-LINK GDB SERVER initialization
+#
+target remote localhost:2331
+set remotetimeout 10000
+monitor device Cortex-M3
+monitor endian little
+monitor reset
+# Set max speed
+monitor speed 4000
+set mem inaccessible-by-default off
+# Setup GDB FOR FASTER DOWNLOADS
+#set remote memory-write-packet-size 4096
+#set remote memory-write-packet-size fixed
+# Boot Flash
+monitor long 0x40000210 = 0x211157
+# Boot RAM start_addr0() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x80000000 ) 
+#monitor long 0x40000210 = 0x80011117
+# Boot RAM start_addr1() Run if ( v40000210 & 0x20000000 ) 
+#monitor long 0x40000210 = 0x20011117
+# Boot RAM start_addr2() Run if ( v40000210 & 0x10000000 )
+#monitor long 0x40000210 = 0x10011117
+# Boot RAM start_addr3() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x8000000 )
+#monitor long 0x40000210 = 0x8011117
+# Boot RAM start_addr4() Init console, Run if ( v40000210 & 0x4000000 )
+monitor long 0x40000210 = 0x4011117
+# CPU CLK 166 MHz?
+# monitor long 0x40000014 = 0x00000011 
+# CPU CLK 83 MHz?
+#monitor long 0x40000014 = 0x00000021 
diff --git a/RTL00_SDKV35a/flasher/gdb_ota.jlink b/RTL00_SDKV35a/flasher/gdb_ota.jlink
new file mode 100644
index 0000000..9ed1306
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_ota.jlink
@@ -0,0 +1,374 @@
+####################################
+# J-LINK GDB SERVER initialization #
+####################################
+define InitJlink
+printf "Jlink Init:\n"
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+#set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+target remote localhost:2331
+set remotetimeout 10000
+monitor device Cortex-M3
+monitor endian little
+monitor reset
+# Set max speed
+monitor speed 4000
+set mem inaccessible-by-default off
+# Setup GDB FOR FASTER DOWNLOADS
+set remote memory-write-packet-size 8192
+set remote memory-write-packet-size fixed
+end
+#############
+# Boot_Flash
+define SetBootFlash
+printf "SetBoot = Flash:\n"
+monitor long 0x40000210 = 0x211157
+end
+# Boot RAM start_addr0() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x80000000 ) 
+define SetBootCall0
+printf "SetBoot = Call0:\n"
+monitor long 0x40000210 = 0x80011117
+end
+# Boot RAM start_addr1() Run if ( v40000210 & 0x20000000 ) 
+define SetBootCall1
+printf "SetBoot = Call1:\n"
+monitor long 0x40000210 = 0x20011117
+end
+# Boot RAM start_addr2() Run if ( v40000210 & 0x10000000 )
+define SetBootCall2
+printf "SetBoot = Call2:\n"
+monitor long 0x40000210 = 0x10011117
+end
+# Boot RAM start_addr3() Run if ( v400001F4 & 0x8000000 ) && ( v40000210 & 0x8000000 )
+define SetBootCall3
+printf "SetBoot = Call3:\n"
+monitor long 0x40000210 = 0x8011117
+end
+# Boot RAM start_addr4() Init console, Run if ( v40000210 & 0x4000000 )
+define SetBootCall4
+printf "SetBoot = Call4:\n"
+monitor long 0x40000210 = 0x4011117
+end
+# CPU CLK 166 MHz?
+define SetClk166MHz
+printf "SetCLK 166.66MHz:\n"
+monitor long 0x40000014 = 0x00000011 
+end
+# CPU CLK 83 MHz?
+define SetClk83MHz
+printf "SetCLK 83.33MHz:\n"
+monitor long 0x40000014 = 0x00000021 
+end
+###############
+# System Init #
+###############
+define SystemInit
+printf "System Init:\n"
+monitor long 0x40000304 = 0x1FC00002
+monitor long 0x40000250 = 0x400
+monitor long 0x40000340 = 0x0
+monitor long 0x40000230 = 0xdcc4
+monitor long 0x40000210 = 0x11117
+monitor long 0x40000210 = 0x11157
+monitor long 0x400002c0 = 0x110011
+monitor long 0x40000320 = 0xffffffff
+end
+############
+# SPI Init #
+############
+define SPI_Init
+printf "Init SPI:\n"
+#enable spi flash peripheral clock
+set $Temp = {int}(0x40000230)
+set $Temp = ($Temp | 0x300)
+set {int}(0x40000230) = $Temp
+#enable spi flash peripheral
+set $Temp = {int}(0x40000210)
+set $Temp = ($Temp | 0x10)
+set {int}(0x40000210) = $Temp
+#select spi flash pinout (0 - internal), enable spi flash pins 
+set $Temp = {int}(0x400002C0)
+set $Temp = (($Temp & 0xFFFFFFF8) | 1)
+set {int}(0x400002C0) = $Temp
+#disable SPI FLASH operation
+monitor long 0x40006008 = 0
+#disable all interrupts
+monitor long 0x4000602C = 0
+#use first "slave select" pin
+monitor long 0x40006010 = 1
+#baud rate, default value
+monitor long 0x40006014 = 2
+#tx fifo threshold
+monitor long 0x40006018 = 0
+#rx fifo threshold
+monitor long 0x4000601C = 0
+#disable DMA
+monitor long 0x4000604C = 0
+set $SPI_FLASH_BASE = 0x98000000
+end
+###################
+# GetOtaSize #
+###################
+define GetOtaSize
+set $rambuffer = 0x10000300
+printf "Get ImagesSize:\n"
+set $ImageOtaSize = 0
+restore $arg0 binary $rambuffer 0 4
+set $ImageAddSize = {int}($rambuffer+0)
+if $ImageAddSize != 0 
+ printf "Image2Size = %d\n", $ImageAddSize
+ set $ImageOtaSize = $ImageOtaSize + $ImageAddSize + 16
+ set $parms1 = $rambuffer - $ImageOtaSize
+ set $parms3 = $ImageOtaSize + 4
+ restore $arg0 binary $parms1 $ImageOtaSize $parms3
+ set $ImageAddSize = {int}($rambuffer+0)
+ if $ImageAddSize < 0x200000
+  printf "ImageSdramSize = %d\n", $ImageAddSize
+  set $ImageOtaSize = $ImageOtaSize + $ImageAddSize + 20
+ end
+else  
+ printf "Image2Size = %d !\n", $ImageOtaSize
+end
+end
+#####################
+# Flash Images Info #
+#####################
+define FlashImagesInfo
+printf "Flash Info:\n"
+set $Image1Size = {int}($SPI_FLASH_BASE + 0x10) + 32
+set $Image1LoadAddr = {int}($SPI_FLASH_BASE + 0x14)
+if $Image1LoadAddr == 0xFFFFFFFF
+printf "Image1 - None\n"
+else
+set $Image2FlashAddr = {short}($SPI_FLASH_BASE + 0x18) * 1024
+if $Image2FlashAddr == 0 
+$Image2FlashAddr = $Image1Size 
+end 
+set $Image2Size = {int}($Image2FlashAddr + $SPI_FLASH_BASE)
+set $Image2LoadAddr = {int}($Image2FlashAddr + $SPI_FLASH_BASE + 0x4)
+printf "Image1Size = %d\n", $Image1Size
+printf "Image1LoadAddr = 0x%08x\n", $Image1LoadAddr
+printf "Image2FlashAddr = 0x%08x\n", $Image2FlashAddr
+if $Image2Size != 0xFFFFFFFF
+printf "Image2Size = %d\n", $Image2Size
+printf "Image2LoadAddr = 0x%08x\n", $Image2LoadAddr
+else
+printf "Image2 - None\n"
+end
+end
+set $ImageOtaAddr = {int}($SPI_FLASH_BASE + 0x9000)
+if $ImageOtaAddr != 0x80000
+printf "ImageOtaAddr = 0x%08x - Invalid!\n", $ImageOtaAddr
+else
+printf "ImageOtaAddr = 0x%08x\n", $ImageOtaAddr
+end
+end
+###############
+# FlasherInit #
+###############
+define FlasherInit
+set $rtl8710_flasher_capacity = 0
+set $rtl8710_flasher_auto_erase = 1
+set $rtl8710_flasher_auto_verify = 1
+set $rtl8710_flasher_firmware_ptr = 0x10001000
+set $rtl8710_flasher_buffer = 0x10008000
+set $rtl8710_flasher_buffer_size = 421888
+set $rtl8710_flasher_sector_size = 4096
+set $rtl8710_flasher_auto_erase_sector = 0xFFFFFFFF
+end
+###############
+# FlasherWait #
+###############
+define FlasherWait
+set $fresult = {int}($rtl8710_flasher_buffer)
+while ($fresult != 0)
+set $fresult = {int}($rtl8710_flasher_buffer)
+end
+end
+###############
+# FlasherLoad #
+###############
+define FlasherLoad
+if $rtl8710_flasher_capacity == 0
+ printf "initializing RTL8710 flasher\n"
+ restore $arg0 binary $rtl8710_flasher_firmware_ptr 0 968
+ monitor reset
+ set $pc = $rtl8710_flasher_firmware_ptr
+ set $sp = 0x1ffffffc
+ set {int}($rtl8710_flasher_buffer + 0x08) = 0
+ set {int}($rtl8710_flasher_buffer + 0x00) = 1
+ #continue
+ monitor go
+ FlasherWait
+ set $id = {int}($rtl8710_flasher_buffer + 0x0C)
+ set $rtl8710_flasher_capacity = 1 << (($id >> 16) & 0x0ff)
+ if ($id == 0x1420c2) 
+  printf "Flash ID = 0x%08x : MX25L8006E (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
+ else 
+  printf "Flash ID = 0x%08x : (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
+ end
+ printf "RTL8710 flasher initialized\n"
+else
+printf "reinitializing RTL8710 flasher\n"
+end
+end
+##################
+# FlasherRdBlock #
+##################
+define FlasherRdBlock
+#printf "FlashRdBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
+set {int}($rtl8710_flasher_buffer + 0x04) = 3
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+set $status = {int}($rtl8710_flasher_buffer + 0x08)
+if $status > 0
+ error "read error, offset 0x%08x", $arg0
+end
+end
+##################
+# FlasherWrBlock #
+##################
+define FlasherWrBlock
+#printf "FlashWrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
+set {int}($rtl8710_flasher_buffer + 0x04) = 4
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+set $status = {int}($rtl8710_flasher_buffer + 0x08)
+if $status > 0
+ error "write error, offset 0x%08x", $arg0
+end
+end
+##################
+# FlasherVrBlock #
+##################
+define FlasherVrBlock
+#printf "FlashVrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
+set {int}($rtl8710_flasher_buffer + 0x04) = 5
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+set $status = {int}($rtl8710_flasher_buffer + 0x08)
+if $status > 0
+ set $status = {int}($rtl8710_flasher_buffer + 0x0C)
+ set $status = {int}($status + $arg0)
+ error "verify error, offset 0x%08x", $status
+end
+end
+#################
+# FlashSecErase #
+#################
+define FlashSecErase
+#printf "FlashSecErase 0x%08x, 0x%08x\n", $rtl8710_flasher_buffer, $arg0
+set {int}($rtl8710_flasher_buffer + 0x04) = 2
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+end
+################
+# FlasherWrite #
+################
+define FlasherWrite
+set $sector = 0
+set $offset = 0
+set $size = $arg2
+while $offset < $size
+ set $len = $size - $offset
+ if $len > $rtl8710_flasher_buffer_size
+  set $len = $rtl8710_flasher_buffer_size
+ end
+ set $flash_offset = $arg1 + $offset
+ printf "write offset 0x%08x\n", $flash_offset
+ set $parms1 = $rtl8710_flasher_buffer + 0x20 - $offset 
+ set $parms2 = $offset 
+ set $parms3 = $offset + $len 
+ restore $arg0 binary $parms1 $parms2 $parms3
+ if $rtl8710_flasher_auto_erase != 0
+  set $count_i = $flash_offset
+  while $count_i < ($flash_offset + $len)
+   set $sector = $count_i/$rtl8710_flasher_sector_size
+   if $rtl8710_flasher_auto_erase_sector != $sector
+	set $parms1 = $sector * $rtl8710_flasher_sector_size
+    printf "erase sector %d at 0x%08x\n", $sector, $parms1 
+    FlashSecErase $parms1
+    set $rtl8710_flasher_auto_erase_sector = $sector
+   end
+   set $count_i = $count_i + 1
+  end
+ end
+ FlasherWrBlock $flash_offset $len
+ printf "write %d bytes at 0x%08x\n", $len, $flash_offset
+ if $rtl8710_flasher_auto_verify != 0
+  printf "verify offset 0x%08x len %d\n", $flash_offset, $len
+  FlasherVrBlock $flash_offset $len
+ end
+ set $offset = $offset + $rtl8710_flasher_buffer_size
+end
+end
+#########################################
+InitJlink
+SystemInit
+SetClk166MHz
+SPI_Init
+GetOtaSize build/bin/ota.bin
+if $ImageOtaSize != 0
+ FlasherInit
+ FlasherLoad flasher/rtl8710_flasher.bin
+ set $FixOtaAddr = 0x80000
+ set $pbuffer = $rtl8710_flasher_buffer + 0x20
+ FlasherRdBlock 0x9000 0x1000
+ set $ImageOtaAddr = {int}($pbuffer)
+ if $ImageOtaAddr != $FixOtaAddr
+  printf "ImageOtaAddr = 0x%08x - Invalid!\n", $ImageOtaAddr
+  set {int}($pbuffer) = $FixOtaAddr
+  set $Temp = $ImageOtaAddr & $FixOtaAddr
+  if $Temp != $FixOtaAddr
+   printf "FlashSecErase at 0x9000\n"
+   FlashSecErase 0x9000
+   printf "Write offset 0x9000 4096 bytes\n"
+   FlasherWrBlock 0x9000 0x1000
+  else
+   printf "Write offset 0x9000 4 bytes\n"
+   FlasherWrBlock 0x9000 0x0004
+  end
+ end
+ FlasherWrite build/bin/ota.bin $FixOtaAddr $ImageOtaSize
+ restore build/bin/ota.bin binary $pbuffer 0 0x1000
+ set {int}($pbuffer + 0x08) = 0x35393138
+ set {int}($pbuffer + 0x0C) = 0x31313738
+ FlasherWrBlock $FixOtaAddr 0x10
+ FlashImagesInfo
+end
+monitor reset
+SetBootFlash
+monitor go
+quit
diff --git a/RTL00_SDKV35a/flasher/gdb_rdflash.jlink b/RTL00_SDKV35a/flasher/gdb_rdflash.jlink
new file mode 100644
index 0000000..674ce48
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_rdflash.jlink
@@ -0,0 +1,17 @@
+# GDB Jlink read fullflash
+# Init
+source -v flasher/gdb_flasher.jlink
+InitJlink
+SystemInit
+SPI_Init
+monitor speed 12000
+#FlashInfo
+# Read FullFlash
+printf "Read FullFlash:\n"
+set $dumpstartaddr = $SPI_FLASH_BASE
+set $dumpendaddr = $SPI_FLASH_BASE + 0x100000
+printf "Start addr of dumping = 0x%08x\n", $dumpstartaddr
+printf "End addr of dumping = 0x%08x\n", $dumpendaddr
+dump binary memory ../fullflash.bin $dumpstartaddr $dumpendaddr
+printf "FullFlash saved in ./build/bin/fullflash.bin - OK.\n"
+quit
diff --git a/RTL00_SDKV35a/flasher/gdb_run_ram.jlink b/RTL00_SDKV35a/flasher/gdb_run_ram.jlink
new file mode 100644
index 0000000..ad6a86d
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_run_ram.jlink
@@ -0,0 +1,11 @@
+#
+# J-LINK GDB SERVER initialization
+#
+source -v flasher/gdb_flasher.jlink
+InitJlink
+load build/obj/build.axf
+SetBootCall4
+monitor reset
+monitor go
+quit
+
diff --git a/RTL00_SDKV35a/flasher/gdb_wrflash.jlink b/RTL00_SDKV35a/flasher/gdb_wrflash.jlink
new file mode 100644
index 0000000..4a4af92
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/gdb_wrflash.jlink
@@ -0,0 +1,166 @@
+###############
+# FlasherInit #
+###############
+define FlasherInit
+set $rtl8710_flasher_capacity = 0
+set $rtl8710_flasher_auto_erase = 1
+set $rtl8710_flasher_auto_verify = 1
+set $rtl8710_flasher_firmware_ptr = 0x10001000
+set $rtl8710_flasher_buffer = 0x10008000
+#262144
+set $rtl8710_flasher_buffer_size = 421888
+set $rtl8710_flasher_sector_size = 4096
+set $rtl8710_flasher_auto_erase_sector = 0xFFFFFFFF
+end
+###############
+# FlasherWait #
+###############
+define FlasherWait
+set $fresult = {int}($rtl8710_flasher_buffer)
+while ($fresult != 0)
+set $fresult = {int}($rtl8710_flasher_buffer)
+end
+end
+###############
+# FlasherLoad #
+###############
+define FlasherLoad
+if $rtl8710_flasher_capacity == 0
+ printf "initializing RTL8710 flasher\n"
+ restore $arg0 binary $rtl8710_flasher_firmware_ptr 0 968
+ monitor reset
+ set $pc = $rtl8710_flasher_firmware_ptr
+ set $sp = 0x1ffffffc
+ set {int}($rtl8710_flasher_buffer + 0x08) = 0
+ set {int}($rtl8710_flasher_buffer + 0x00) = 1
+ #continue
+ monitor go
+ FlasherWait
+ set $id = {int}($rtl8710_flasher_buffer + 0x0C)
+ if ($id == 0x1420c2) 
+  set $rtl8710_flasher_capacity = 1 << (($id >> 16) & 0x0ff)
+  printf "Flash ID = 0x%08x : MX25L8006E (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
+ else 
+  set $rtl8710_flasher_capacity = 1024*1024)
+  error "Flash ID = 0x%08x : ?\n", $id
+ end
+ printf "RTL8710 flasher initialized\n"
+else
+printf "reinitializing RTL8710 flasher\n"
+end
+end
+##################
+# FlasherWrBlock #
+##################
+define FlasherWrBlock
+#printf "FlashWrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
+set {int}($rtl8710_flasher_buffer + 0x04) = 4
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+set $status = {int}($rtl8710_flasher_buffer + 0x08)
+if $status > 0
+ error "write error, offset 0x%08x", $arg0
+end
+end
+##################
+# FlasherVrBlock #
+##################
+define FlasherVrBlock
+#printf "FlashVrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
+set {int}($rtl8710_flasher_buffer + 0x04) = 5
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+set $status = {int}($rtl8710_flasher_buffer + 0x08)
+if $status > 0
+ set $status = {int}($rtl8710_flasher_buffer + 0x0C)
+ set $status = {int}($status + $arg0)
+ error "verify error, offset 0x%08x", $status
+end
+end
+#################
+# FlashSecErase #
+#################
+define FlashSecErase
+#printf "FlashSecErase 0x%08x, 0x%08x\n", $rtl8710_flasher_buffer, $arg0
+set {int}($rtl8710_flasher_buffer + 0x04) = 2
+set {int}($rtl8710_flasher_buffer + 0x08) = 0
+set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
+set {int}($rtl8710_flasher_buffer + 0x00) = 1
+FlasherWait
+end
+################
+# FlasherWrite #
+################
+define FlasherWrite
+set $sector = 0
+set $offset = 0
+set $size = $arg2
+while $offset < $size
+ set $len = $size - $offset
+ if $len > $rtl8710_flasher_buffer_size
+  set $len = $rtl8710_flasher_buffer_size
+ end
+ set $flash_offset = $arg1 + $offset
+ printf "write offset 0x%08x\n", $flash_offset
+ set $parms1 = $rtl8710_flasher_buffer + 0x20 - $offset - $arg1
+ set $parms2 = $offset + $arg1
+ set $parms3 = $offset + $len + $arg1
+ restore $arg0 binary $parms1 $parms2 $parms3
+ if $rtl8710_flasher_auto_erase != 0
+  set $count_i = $flash_offset
+  while $count_i < ($flash_offset + $len)
+   set $sector = $count_i/$rtl8710_flasher_sector_size
+   if $rtl8710_flasher_auto_erase_sector != $sector
+	set $parms1 = $sector * $rtl8710_flasher_sector_size
+    printf "erase sector %d at 0x%08x\n", $sector, $parms1 
+    FlashSecErase $parms1
+    set $rtl8710_flasher_auto_erase_sector = $sector
+   end
+   set $count_i = $count_i + 1
+  end
+ end
+ FlasherWrBlock $flash_offset $len
+ printf "wrote %d bytes at 0x%08x\n", $len, $flash_offset
+ if $rtl8710_flasher_auto_verify != 0
+  printf "verify offset 0x%08x len %d\n", $flash_offset, $len
+  FlasherVrBlock $flash_offset $len
+ end
+ set $offset = $offset + $rtl8710_flasher_buffer_size
+end
+end
+#########################################
+source -v flasher/gdb_flasher.jlink
+source -v flasher/flash_file.jlink
+InitJlink
+SystemInit
+SetClk166MHz
+SPI_Init
+FlashImagesInfo
+#SetFirwareSize $wr_flile
+call1
+if $FirmwareSize == 0
+ error "FirmwareSize = 0!"
+end
+FlasherInit
+FlasherLoad flasher/rtl8710_flasher.bin
+if $Image1Size != 0
+ printf "Write Image1 size %d to Flash addr 0x00000000:\n", $Image1Size
+ #FlasherWrite $wr_flile 0 $Image1Size
+ call2
+ if $Image2Size != 0 && $Image2Addr >= $Image1Size 
+  printf "Write Image2 size %d to Flash addr 0x%08x:\n", $Image2Size, $Image2Addr
+  #FlasherWrite $wr_flile $Image2Addr $Image2Size
+  call3
+ end
+end
+FlashImagesInfo
+monitor reset
+SetBootFlash
+monitor go
+quit
diff --git a/RTL00_SDKV35a/flasher/rtl8710.ocd b/RTL00_SDKV35a/flasher/rtl8710.ocd
new file mode 100644
index 0000000..2f2b102
--- /dev/null
+++ b/RTL00_SDKV35a/flasher/rtl8710.ocd
@@ -0,0 +1,340 @@
+#
+# OpenOCD script for RTL8710
+# Copyright (C) 2016 Rebane, rebane@alkohol.ee
+#
+set CHIPNAME rtl8195a
+set CHIPSERIES ameba1
+
+# Adapt based on what transport is active.
+
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME rtl8710
+}
+
+if { [info exists ENDIAN] } {
+	set _ENDIAN $ENDIAN
+} else {
+	set _ENDIAN little
+}
+
+if { [info exists WORKAREASIZE] } {
+	set _WORKAREASIZE $WORKAREASIZE
+} else {
+	set _WORKAREASIZE 0x800
+}
+
+if { [info exists CPUTAPID] } {
+	set _CPUTAPID $CPUTAPID
+} else {
+	set _CPUTAPID 0x2ba01477
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x10001000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+# adapter_khz 500
+adapter_nsrst_delay 100
+
+if {![using_hla]} {
+	cortex_m reset_config sysresetreq vectreset 
+}
+
+set rtl8710_flasher_firmware_ptr 0x10001000
+set rtl8710_flasher_buffer 0x10008000
+set rtl8710_flasher_buffer_size 262144
+set rtl8710_flasher_sector_size 4096
+
+array set rtl8710_flasher_code {
+	0 0xB671B57F 1 0x25FF4B58 2 0x6B196B1A 3 0x7040F042 4 0x69D96318 5 0xF4414E55
+	6 0x69D97480 7 0xF8D361DC 8 0xF8C32120 9 0xF8D35120 10 0xF8C31124 11 0x47B05124
+	12 0x47B04E4F 13 0x47984B4F 14 0x60104A4F 15 0x484F47B0 16 0x60012100 17 0x2C006804
+	18 0x4D4DD0FC 19 0xB93E682E 20 0x60264C49 21 0x47B04E46 22 0x47984B46 23 0xE7ED6020
+	24 0x2B01682B 25 0x4E42D109 26 0x4C4647B0 27 0x47A02006 28 0x47904A45 29 0x47A020C7
+	30 0x682AE00D 31 0xD10E2A02 32 0x47B04E3B 33 0x20064C3F 34 0x483F47A0 35 0x493F4780
+	36 0x68084D3F 37 0x47B047A8 38 0x47A02004 39 0x6828E7CE 40 0xD1132803 41 0x47A04C32
+	42 0x24004838 43 0x4E396805 44 0x68311960 45 0xD206428C 46 0x4B384A37 47 0x221018A1
+	48 0x34104798 49 0x4D2AE7F3 50 0xE7B847A8 51 0x29046829 52 0x2400D11B 53 0x6806482F
+	54 0xD2B042B4 55 0x47A84D24 56 0x20064E28 57 0x4B2847B0 58 0x49284798 59 0x680A4B2A
+	60 0x18A018E1 61 0xF44F4B2A 62 0x47987280 63 0x200447A8 64 0xF50447B0 65 0x47A87480
+	66 0x682CE7E4 67 0xD1232C05 68 0x47984B17 69 0x4D1F2400 70 0x4294682A 71 0x481BD28F
+	72 0x68012210 73 0x18604E1D 74 0x47B04669 75 0x1B19682B 76 0xBF282910 77 0x23002110
+	78 0xD011428B 79 0xF81D4A16 80 0x18A05003 81 0x42B55CC6 82 0x3301D101 83 0x4A15E7F4
+	84 0x60112101 85 0xE7726054 86 0x25014E12 87 0xE76E6035 88 0x47A84D03 89 0xE7D63410
+	90 0x40000200 91 0x100011BD 92 0x100013DD 93 0x10001289 94 0x1000800C 95 0x10008000
+	96 0x10008004 97 0x1000130D 98 0x100013ED 99 0x10008010 100 0x10001335 101 0x10008014
+	102 0x10008020 103 0x10001221 104 0x10001375 105 0x10008008 106 0x6A5A4B03 107 0xD0FB0512
+	108 0x0060F893 109 0xBF004770 110 0x40006000 111 0x6B194B17 112 0xF4416B1A 113 0x63187040
+	114 0x69186919 115 0x0110F041 116 0xF8D36119 117 0x220000C0 118 0x0106F020 119 0x00C0F8D3
+	120 0x10C0F8C3 121 0x00C0F8D3 122 0x0101F040 123 0x00C0F8D3 124 0x10C0F8C3 125 0x43BCF503
+	126 0x609A6899 127 0x20016AD9 128 0x691962DA 129 0x69596118 130 0x61592102 131 0x619A6999
+	132 0x61DA69D9 133 0x64DA6CD9 134 0xBF004770 135 0x40000200 136 0x460EB570 137 0xB34A4614
+	138 0xF3C04B15 139 0x681A4507 140 0x7240F44F 141 0x685A601A 142 0xF3C02103 143 0x2C102207
+	144 0x2410BF28 145 0x605CB2C0 146 0x1060F883 147 0x5060F883 148 0xF8832101 149 0xF8832060
+	150 0x689A0060 151 0x60992500 152 0x47984B08 153 0x35015570 154 0x42A2B2AA 155 0x4804D3F8
+	156 0xF0116A81 157 0xD1FA0301 158 0x60836881 159 0xBD704620 160 0x40006000 161 0x100011A9
+	162 0x4C10B5F8 163 0x68232003 164 0x7340F44F 165 0x68636023 166 0x60602101 167 0x68A3229F
+	168 0x60A14D0B 169 0x2060F884 170 0x460647A8 171 0x460747A8 172 0x040347A8 173 0x2707EA43
+	174 0x0006EA47 175 0x4B036AA1 176 0x0201F011 177 0x6899D1FA 178 0xBDF8609A 179 0x40006000
+	180 0x100011A9 181 0x4C0BB510 182 0x68232001 183 0x7340F44F 184 0x68636023 185 0x60602105
+	186 0x60A068A2 187 0xF8844A06 188 0x47901060 189 0x4B036AA1 190 0x0201F011 191 0x6899D1FA
+	192 0xBD10609A 193 0x40006000 194 0x100011A9 195 0x21014B08 196 0xF44F681A 197 0x601A7280
+	198 0x6099689A 199 0x0060F883 200 0x48036A9A 201 0x0101F012 202 0x6883D1FA 203 0x47706081
+	204 0x40006000 205 0x21014B0E 206 0xF44F681A 207 0x601A7280 208 0x2220689A 209 0xF8836099
+	210 0xF3C02060 211 0xF3C04107 212 0xB2C02207 213 0x1060F883 214 0x2060F883 215 0x0060F883
+	216 0x4A036A99 217 0x0001F011 218 0x6893D1FA 219 0x47706090 220 0x40006000 221 0xB36AB530
+	222 0x25014B17 223 0xF44F681C 224 0x601C7480 225 0x2402689C 226 0xF883609D 227 0xF3C04060
+	228 0xF3C04507 229 0xB2C02407 230 0x5060F883 231 0x7F80F5B2 232 0xF44FBF28 233 0xF8837280
+	234 0xF8834060 235 0x20000060 236 0x4C095C0D 237 0xF8843001 238 0xB2855060 239 0xD3F74295
+	240 0x07496A99 241 0x6AA0D5FC 242 0xF0104B03 243 0xD1FA0101 244 0x60996898 245 0xBD304610
+	246 0x40006000 247 0x4B02B508 248 0x07C04798 249 0xBD08D4FB 250 0x100012D5 251 0x4B04B508
+	252 0xF0004798 253 0xB2C10002 254 0xD0F82900 255 0xBF00BD08 256 0x100012D5
+}
+
+set rtl8710_flasher_command_read_id      0
+set rtl8710_flasher_command_mass_erase   1
+set rtl8710_flasher_command_sector_erase 2
+set rtl8710_flasher_command_read         3
+set rtl8710_flasher_command_write        4
+set rtl8710_flasher_command_verify       5
+
+set rtl8710_flasher_ready                0
+set rtl8710_flasher_capacity             0
+set rtl8710_flasher_auto_erase           0
+set rtl8710_flasher_auto_verify          0
+set rtl8710_flasher_auto_erase_sector    0xFFFFFFFF
+
+proc rtl8710_flasher_init {} {
+	global rtl8710_flasher_firmware_ptr
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_capacity
+	global rtl8710_flasher_ready
+	global rtl8710_flasher_code
+
+	if {[expr {$rtl8710_flasher_ready == 0}]} {
+		echo "initializing RTL8710 flasher"
+		halt
+		mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+		mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+		array2mem rtl8710_flasher_code 32 $rtl8710_flasher_firmware_ptr [array size rtl8710_flasher_code]
+		reg faultmask 0x01
+		reg sp 0x20000000
+		reg pc $rtl8710_flasher_firmware_ptr
+		resume
+		rtl8710_flasher_wait
+		set id [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x0C}]]
+		set rtl8710_flasher_capacity [expr {2 ** [expr {($id >> 16) & 0xFF}]}]
+		set rtl8710_flasher_ready 1
+		echo "RTL8710 flasher initialized"
+	}
+	return ""
+}
+
+proc rtl8710_flasher_mrw {reg} {
+	set value ""
+	mem2array value 32 $reg 1
+	return $value(0)
+}
+
+proc rtl8710_flasher_wait {} {
+	global rtl8710_flasher_buffer
+	while {[rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x00}]]} { }
+}
+
+proc rtl8710_flasher_load_block {local_filename offset len} {
+	global rtl8710_flasher_buffer
+	load_image $local_filename [expr {$rtl8710_flasher_buffer + 0x20 - $offset}] bin [expr {$rtl8710_flasher_buffer + 0x20}] $len
+}
+
+proc rtl8710_flasher_read_block {offset len} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_command_read
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_read
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x10}] $offset
+	mww [expr {$rtl8710_flasher_buffer + 0x14}] $len
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+	set status [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x08}]]
+	if {[expr {$status > 0}]} {
+		error "read error, offset $offset"
+	}
+}
+
+proc rtl8710_flasher_write_block {offset len} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_command_write
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_write
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x10}] $offset
+	mww [expr {$rtl8710_flasher_buffer + 0x14}] $len
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+	set status [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x08}]]
+	if {[expr {$status > 0}]} {
+		error "write error, offset $offset"
+	}
+}
+
+proc rtl8710_flasher_verify_block {offset len} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_command_verify
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_verify
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x10}] $offset
+	mww [expr {$rtl8710_flasher_buffer + 0x14}] $len
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+	set status [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x08}]]
+	if {[expr {$status > 0}]} {
+		set status [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x0C}]]
+		set status [expr {$status + $offset}]
+		error "verify error, offset $status"
+	}
+}
+
+proc rtl8710_flash_read_id {} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_capacity
+	global rtl8710_flasher_command_read_id
+	rtl8710_flasher_init
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_read_id
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+	set id [rtl8710_flasher_mrw [expr {$rtl8710_flasher_buffer + 0x0C}]]
+	set manufacturer_id [format "0x%02X" [expr {$id & 0xFF}]]
+	set memory_type [format "0x%02X" [expr {($id >> 8) & 0xFF}]]
+	set memory_capacity [expr {2 ** [expr {($id >> 16) & 0xFF}]}]
+	echo "manufacturer ID: $manufacturer_id, memory type: $memory_type, memory capacity: $memory_capacity bytes"
+}
+
+proc rtl8710_flash_mass_erase {} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_command_mass_erase
+	rtl8710_flasher_init
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_mass_erase
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+}
+
+proc rtl8710_flash_sector_erase {offset} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_command_sector_erase
+	rtl8710_flasher_init
+	mww [expr {$rtl8710_flasher_buffer + 0x04}] $rtl8710_flasher_command_sector_erase
+	mww [expr {$rtl8710_flasher_buffer + 0x08}] 0x00000000
+	mww [expr {$rtl8710_flasher_buffer + 0x10}] $offset
+	mww [expr {$rtl8710_flasher_buffer + 0x00}] 0x00000001
+	rtl8710_flasher_wait
+}
+
+proc rtl8710_flash_read {local_filename loc size} {
+	global rtl8710_flasher_buffer
+	global rtl8710_flasher_buffer_size
+	rtl8710_flasher_init
+	for {set offset 0} {$offset < $size} {set offset [expr {$offset + $rtl8710_flasher_buffer_size}]} {
+		set len [expr {$size - $offset}]
+		if {[expr {$len > $rtl8710_flasher_buffer_size}]} {
+			set len $rtl8710_flasher_buffer_size
+		}
+		set flash_offset [expr {$loc + $offset}]
+		echo "read offset $flash_offset"
+		rtl8710_flasher_read_block $flash_offset $len
+		dump_image _rtl8710_flasher.bin [expr {$rtl8710_flasher_buffer + 0x20}] $len
+		exec dd conv=notrunc if=_rtl8710_flasher.bin "of=$local_filename" bs=1 "seek=$offset"
+		echo "read $len bytes"
+	}
+}
+
+proc rtl8710_flash_write {local_filename loc} {
+	global rtl8710_flasher_buffer_size
+	global rtl8710_flasher_sector_size
+	global rtl8710_flasher_auto_erase
+	global rtl8710_flasher_auto_verify
+	global rtl8710_flasher_auto_erase_sector
+	rtl8710_flasher_init
+	set sector 0
+	set size [file size $local_filename]
+	for {set offset 0} {$offset < $size} {set offset [expr {$offset + $rtl8710_flasher_buffer_size}]} {
+		set len [expr {$size - $offset}]
+		if {[expr {$len > $rtl8710_flasher_buffer_size}]} {
+			set len $rtl8710_flasher_buffer_size
+		}
+		set flash_offset [expr {$loc + $offset}]
+		echo "write offset $flash_offset"
+		rtl8710_flasher_load_block $local_filename $offset $len
+		if {[expr {$rtl8710_flasher_auto_erase != 0}]} {
+			for {set i $flash_offset} {$i < [expr {$flash_offset + $len}]} {incr i} {
+				set sector [expr {$i / $rtl8710_flasher_sector_size}]
+				if {[expr {$rtl8710_flasher_auto_erase_sector != $sector}]} {
+					echo "erase sector $sector"
+					rtl8710_flash_sector_erase [expr {$sector * $rtl8710_flasher_sector_size}]
+					set rtl8710_flasher_auto_erase_sector $sector
+				}
+			}
+		}
+		rtl8710_flasher_write_block $flash_offset $len
+		echo "wrote $len bytes"
+		if {[expr {$rtl8710_flasher_auto_verify != 0}]} {
+			echo "verify offset $flash_offset"
+			rtl8710_flasher_verify_block $flash_offset $len
+		}
+	}
+}
+
+proc rtl8710_flash_verify {local_filename loc} {
+	global rtl8710_flasher_buffer_size
+	rtl8710_flasher_init
+	set size [file size $local_filename]
+	for {set offset 0} {$offset < $size} {set offset [expr {$offset + $rtl8710_flasher_buffer_size}]} {
+		set len [expr {$size - $offset}]
+		if {[expr {$len > $rtl8710_flasher_buffer_size}]} {
+			set len $rtl8710_flasher_buffer_size
+		}
+		set flash_offset [expr {$loc + $offset}]
+		echo "read offset $flash_offset"
+		rtl8710_flasher_load_block $local_filename $offset $len
+		echo "verify offset $flash_offset"
+		rtl8710_flasher_verify_block $flash_offset $len
+	}
+}
+
+proc rtl8710_flash_auto_erase {on} {
+	global rtl8710_flasher_auto_erase
+	if {[expr {$on != 0}]} {
+		set rtl8710_flasher_auto_erase 1
+		echo "auto erase on"
+	} else {
+		set rtl8710_flasher_auto_erase 0
+		echo "auto erase off"
+	}
+}
+
+proc rtl8710_flash_auto_verify {on} {
+	global rtl8710_flasher_auto_verify
+	if {[expr {$on != 0}]} {
+		set rtl8710_flasher_auto_verify 1
+		echo "auto verify on"
+	} else {
+		set rtl8710_flasher_auto_verify 0
+		echo "auto verify off"
+	}
+}
+
+proc rtl8710_reboot {} {
+	echo "# Set processor clock to default before system reset"
+	mww 0x40000014 0x00000021 
+	sleep 10
+	echo "# Reboot (system reset)"
+	mww 0xE000ED0C 0x05FA0007
+}
+
diff --git a/RTL00_SDKV35a/flasher/rtl8710_flasher.bin b/RTL00_SDKV35a/flasher/rtl8710_flasher.bin
new file mode 100644
index 0000000000000000000000000000000000000000..6c7e36d4c99d89ba7a7263e641d5777eedd594d1
GIT binary patch
literal 968
zcmZ`%O-vI(6rSxb&|*etj4YCDx0tjgCWM4|@IbSa4($R>BvBL&Q{_<FOF_MvSZp*V
zJ*eSgD#Sg)4N7Vtp`oS+<E;fvNI4V_+W2#5!cQhbqHniFxp<iU-pu#j_ue<NSH4w)
zPnM_O-jv6N_~=+rs(NPlyQQfcBho>9rWE=u=9ys6vrhY{{E8@KjdW9ml-cA<ShGPH
zi9F@Q$bC{6mie%_-UF<f)4a!rIk&Z_kilV-ut*40zXw!^LHmBL@L`?133!jj_W|E0
zUkt1G6F9xQ1-NT+nW2?!h7@#phoNrck0!JrmA9_?vFP&d5Zt>DxdwMfvCP(#GTT_L
z<t<1nTM97=1>yp|U51d`9|S)xuS<4%RUZc6jEC_D3i(=T4;#B&(5=iKg2s!#8qc>%
zP>IDUpA&ki{oDNG?YPUii5&>~rzA_^*+d7^?L8gfid@f8g>!s>tX?`(QDC;+`aW7g
zn@EQ|ORWe`w;*hdBmC|>!U)g+>kFK%1BW4Q1QY-V02=^p>KX8cz-T1DZ_%T!Uj<H{
zV-&>*qR4|~&dx`r1NGJTDXEHed}y2H1hHz;<pI@Ls&ZPaKiud?Vv3gTw1sr`TcK2_
z6e>-E4$KzITwld*a3<P(%|4qPR28XSoS+Fth1|Ybs-vi3niH)f5TO)ZCPv0tqWtUh
zyu@~lfw@R)mD3*=^#Q>*M`Ky+i)Fz-%(?`g&%rx*?!__|s&~kgb0p~-$1J1Wjl+w?
z;9DdnSjgb{ZW4t4WL=31s5<{N8vP9!RmB4JGEGvWreK7ZK3ma{J?&`*H*s*ofp=}@
zNDJJ^agmc#6x?gGHJ`~5Y97yc&ZSk?|EtBB+p8DU`umqC*Evshosj8)JM-32+gp9<
z!}z0I+PSGtqiWgU-c+P~JpEWQ4Ib?zBID+hPl;3C{v^ddtogth-H<}^=97;&n}PqK
KwogEIZT|;|PH&e0

literal 0
HcmV?d00001

diff --git a/paths.mk b/RTL00_SDKV35a/paths.mk
similarity index 91%
rename from paths.mk
rename to RTL00_SDKV35a/paths.mk
index 8d56fa3..49d2cbe 100644
--- a/paths.mk
+++ b/RTL00_SDKV35a/paths.mk
@@ -1,13 +1,13 @@
 #---------------------------
-# User defined
+# User defined (in userset.mk)
 #---------------------------
-SDK_PATH = RTL00_SDKV35a/
+SDK_PATH ?= ../RTL00MP3/RTL00_SDKV35a/
 #GCC_PATH = d:/MCU/GNU_Tools_ARM_Embedded/5.2_2015q4/bin/# + or set in PATH
 #OPENOCD_PATH = d:/MCU/OpenOCD/bin/# + or set in PATH
 TOOLS_PATH ?= $(SDK_PATH)component/soc/realtek/8195a/misc/iar_utility/common/tools/
 FLASHER_TYPE ?= Jlink
 #FLASHER_TYPE ?= OCD
-FLASHER_PATH ?= flasher/
+FLASHER_PATH ?= $(SDK_PATH)flasher/
 JLINK_PATH ?= D:/MCU/SEGGER/JLink_V612i/
 JLINK_GDBSRV ?= JLinkGDBServer.exe
 #---------------------------
diff --git a/sdkbuild.mk b/RTL00_SDKV35a/sdkbuild.mk
similarity index 98%
rename from sdkbuild.mk
rename to RTL00_SDKV35a/sdkbuild.mk
index 5291d37..51b918d 100644
--- a/sdkbuild.mk
+++ b/RTL00_SDKV35a/sdkbuild.mk
@@ -1,6 +1,6 @@
-
-include sdkset.mk
-include paths.mk
+include userset.mk
+include $(SDK_PATH)paths.mk
+include project.mk
 
 INCFLAGS = $(patsubst %,-I%,$(patsubst sdk/%,$(SDK_PATH)%,$(INCLUDES)))
 
diff --git a/sdkset.mk b/RTL00_SDKV35a/sdkset.mk
similarity index 96%
rename from sdkset.mk
rename to RTL00_SDKV35a/sdkset.mk
index 66db7e8..7386f24 100644
--- a/sdkset.mk
+++ b/RTL00_SDKV35a/sdkset.mk
@@ -1,34 +1,45 @@
+#=============================================
+# USER CONFIG (in project.mk)
+#=============================================
 #USE_AT = 1
 #USE_FATFS = 1
 #USE_SDIOH = 1
 #USE_POLARSSL = 1
 #USE_P2P_WPS = 1
-ifndef USE_AT
-USE_NEWCONSOLE = 1
-USE_WIFI_API = 1
-endif
-USE_MBED = 1
-
+#ifndef USE_AT
+#USE_NEWCONSOLE = 1
+#USE_WIFI_API = 1
+#endif
+#USE_MBED = 1
+#USE_GCC_LIB = 1
 #RTOSDIR=freertos_v8.1.2
-RTOSDIR=freertos_v9.0.0
-LWIPDIR=lwip_v1.4.1
-
+#RTOSDIR=freertos_v9.0.0
+#LWIPDIR=lwip_v1.4.1
+# -------------------------------------------------------------------
 # FLAGS
 # -------------------------------------------------------------------
 CFLAGS = -DM3 -DCONFIG_PLATFORM_8195A -DGCC_ARMCM3 -DARDUINO_SDK -DF_CPU=166666666L -DNDEBUG
 CFLAGS += -mcpu=cortex-m3 -mthumb -g2 -Os -std=gnu99 -Wall -Werror
 CFLAGS += -fno-common -fmessage-length=0 -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-short-enums -fsigned-char 
 CFLAGS += -w -Wno-pointer-sign    
+ifdef USE_GCC_LIB 
+LFLAGS = -mcpu=cortex-m3 -mthumb -g -Os -nostartfiles --specs=nano.specs
+else
 LFLAGS = -mcpu=cortex-m3 -mthumb -g -Os -nostartfiles -nostdlib
-#--specs=nano.specs
+endif
 LFLAGS += -Wl,--gc-sections -Wl,--cref -Wl,--entry=Reset_Handler -Wl,--no-enum-size-warning -Wl,--no-wchar-size-warning -Wl,-nostdlib
 
 # LIBS
 # -------------------------------------------------------------------
 LIBS =
+ifdef USE_GCC_LIB 
+all: LIBS +=_platform_new _wlan _p2p _wps _websocket _sdcard _xmodem _mdns gcc m c nosys 
+mp: LIBS +=_platform_new _wlan_mp _wps _p2p _websocket _sdcard _xmodem _mdns gcc m c nosys 
+else
 all: LIBS +=_platform_new _wlan _p2p _wps _websocket _sdcard _xmodem _mdns
-# m c nosys gcc
 mp: LIBS +=_platform_new _wlan_mp _wps _p2p _websocket _sdcard _xmodem _mdns
+endif
+# m c nosys gcc
 PATHLIBS = sdk/component/soc/realtek/8195a/misc/bsp/lib/common/gcc
 LDFILE = rlx8195A-symbol-v04-img2.ld
 BOOTS = sdk/component/soc/realtek/8195a/misc/bsp/image
@@ -370,7 +381,9 @@ SRC_C += sdk/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_libglos
 SRC_C += sdk/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/rtl_eabi_cast_ram.c
 SRC_C += sdk/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/rtl_math_ram.c
 #if +- nostdlib..
+ifndef USE_GCC_LIB 
 SRC_C += sdk/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/ram_pvvx_libc.c 
+endif
 #if c_printf() float
 SRC_C += sdk/component/soc/realtek/8195a/misc/rtl_std_lib/lib_rtlstd/c_stdio.c
 # -------------------------------------------------------------------
@@ -423,34 +436,3 @@ endif
 #ADD_SRC_C += sdk/component/common/example/mdns/example_mdns.c
 #ADD_SRC_C += sdk/component/common/example/socket_select/example_socket_select.c
 #ADD_SRC_C += sdk/component/common/example/xml/example_xml.c
-
-#=============================================
-# PROGECT
-#=============================================
-#user main
-ADD_SRC_C += project/src/user/main.c
-# components
-ADD_SRC_C += project/src/user/wifi_console.c
-ADD_SRC_C += project/src/user/atcmd_user.c
-ADD_SRC_C += project/src/user/spiram_fifo.c
-
-#lib mad
-ADD_SRC_C += project/src/mad/mad_version.c
-ADD_SRC_C += project/src/mad/mpg12/layer12.c
-ADD_SRC_C += project/src/mad/frame.c
-ADD_SRC_C += project/src/mad/layer3.c
-ADD_SRC_C += project/src/mad/align.c
-ADD_SRC_C += project/src/mad/decoder.c
-ADD_SRC_C += project/src/mad/huffman.c
-ADD_SRC_C += project/src/mad/fixed.c
-ADD_SRC_C += project/src/mad/bit.c
-ADD_SRC_C += project/src/mad/synth.c
-ADD_SRC_C += project/src/mad/timer.c
-ADD_SRC_C += project/src/mad/stream.c
-
-#driver
-ADD_SRC_C += project/src/driver/i2s_freertos.c
-
-#include
-INCLUDES += project/inc/mad
-#=============================================
diff --git a/build/bin/ota.bin b/build/bin/ota.bin
index 062c99ebc22ee226e8eb3b294bbbef9b0aeef50b..d56b6188d7738ba6eea2d185744b7cda804a6d4a 100644
GIT binary patch
delta 37
qcmX@JLg>s2p#>~V4N1*REbUAzj6lo;#LU~7SXkU9u*fjqW&{A#VF_UX

delta 37
qcmX@JLg>s2p#>~VCyJVxSlXFb7=f4xh?%!Dv9P#JU@2j~%?JSBQ3??N

diff --git a/build/bin/ram_2.bin b/build/bin/ram_2.bin
index c1a4ca31ade2edcca66a977ac17a36c4a745eb32..cc321b69ee1e987db1fa9201b54e4321cae8d060 100644
GIT binary patch
delta 33
mcmZ3nLTJSbp$#9HnHrLsKQXs|VrB$lCLm_s{)w5zYytrIpbfMD

delta 33
mcmZ3nLTJSbp$#9HnNAcne`0R`#LNi9OhC-M{Sz~b*#rOphYkz?

diff --git a/build/bin/ram_2.ns.bin b/build/bin/ram_2.ns.bin
index 461206139e3c3a2294c79d145ede2432432ceb05..45313a2df00358d1cede20f7ebe4cee45aabb784 100644
GIT binary patch
delta 32
lcmdn7LTJYdp#>~V4N1*REbUAzj6lo;#LU~7SXj&^005&;2r2*o

delta 32
lcmdn7LTJYdp#>~VCyJVxSlXFb7=f4xh?%!Dv9Op;0065e2!a3r

diff --git a/build/bin/ram_2.p.bin b/build/bin/ram_2.p.bin
index a59d399c8f779c9b726342a7d89d40c5ad59a170..23901ab1bbee241afaadf9c028f8fd9780027b0e 100644
GIT binary patch
delta 32
lcmdn7LTJYdp#>~V4N1*REbUAzj6lo;#LU~7SXj&^005&;2r2*o

delta 32
lcmdn7LTJYdp#>~VCyJVxSlXFb7=f4xh?%!Dv9Op;0065e2!a3r

diff --git a/build/bin/ram_all.bin b/build/bin/ram_all.bin
index fbd1e845ffa1bde8725992c1a8aba7d75fbcfecc..c6bc8879aa8a37015fc991583fc905d35d318376 100644
GIT binary patch
delta 32
lcmX@nA$p=ibio#;hNNbuE$vKO7=f4xh?%!DZDDbn007!b3_t(?

delta 32
lcmX@nA$p=ibio#;6GhETTiThnFaj|X5HoLQ+QQ;C0RZA64441_

diff --git a/project.mk b/project.mk
new file mode 100644
index 0000000..7600a76
--- /dev/null
+++ b/project.mk
@@ -0,0 +1,54 @@
+#=============================================
+# SDK CONFIG
+#=============================================
+#USE_AT = 1
+#USE_FATFS = 1
+#USE_SDIOH = 1
+#USE_POLARSSL = 1
+#USE_P2P_WPS = 1
+#USE_GCC_LIB = 1
+USE_MBED = 1
+
+ifndef USE_AT
+USE_NEWCONSOLE = 1
+USE_WIFI_API = 1
+endif
+
+#RTOSDIR=freertos_v8.1.2
+RTOSDIR=freertos_v9.0.0
+LWIPDIR=lwip_v1.4.1
+include $(SDK_PATH)sdkset.mk
+#compile
+CFLAGS += -DLOGUART_STACK_SIZE=1024
+#CFLAGS += -DDEFAULT_BAUDRATE=1562500
+#=============================================
+# User Files
+#=============================================
+#user main
+ADD_SRC_C += project/src/user/main.c
+# components
+ADD_SRC_C += project/src/user/wifi_console.c
+ADD_SRC_C += project/src/user/atcmd_user.c
+ADD_SRC_C += project/src/user/spiram_fifo.c
+
+#lib mad
+ADD_SRC_C += project/src/mad/mad_version.c
+ADD_SRC_C += project/src/mad/mpg12/layer12.c
+ADD_SRC_C += project/src/mad/frame.c
+ADD_SRC_C += project/src/mad/layer3.c
+ADD_SRC_C += project/src/mad/align.c
+ADD_SRC_C += project/src/mad/decoder.c
+ADD_SRC_C += project/src/mad/huffman.c
+ADD_SRC_C += project/src/mad/fixed.c
+ADD_SRC_C += project/src/mad/bit.c
+ADD_SRC_C += project/src/mad/synth.c
+ADD_SRC_C += project/src/mad/timer.c
+ADD_SRC_C += project/src/mad/stream.c
+
+#driver
+ADD_SRC_C += project/src/driver/i2s_freertos.c
+
+#include
+INCLUDES += project/inc/mad
+
+
diff --git a/userset.mk b/userset.mk
new file mode 100644
index 0000000..17ed53a
--- /dev/null
+++ b/userset.mk
@@ -0,0 +1,12 @@
+#=============================================
+# User defined
+#=============================================
+SDK_PATH ?= RTL00_SDKV35a/
+#GCC_PATH = d:/MCU/GNU_Tools_ARM_Embedded/5.2_2015q4/bin/# + or set in PATH
+#OPENOCD_PATH = d:/MCU/OpenOCD/bin/# + or set in PATH
+TOOLS_PATH ?= $(SDK_PATH)component/soc/realtek/8195a/misc/iar_utility/common/tools/
+FLASHER_TYPE ?= Jlink
+#FLASHER_TYPE ?= OCD
+FLASHER_PATH ?= $(SDK_PATH)flasher/
+JLINK_PATH ?= D:/MCU/SEGGER/JLink_V612i/
+JLINK_GDBSRV ?= JLinkGDBServer.exe