add

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/rtl8195a_usb.h

@@ -0,0 +1,111 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_USB_H_
+#define _RTL8195A_USB_H_
+
+
+// common command for USB
+#define USB_CMD_TX_ETH         0x83    // request to TX a 802.3 packet
+#define USB_CMD_TX_WLN         0x81    // request to TX a 802.11 packet
+#define USB_CMD_H2C            0x11    // H2C(host to device) command packet
+#define USB_CMD_MEMRD          0x51    // request to read a block of memory data
+#define USB_CMD_MEMWR          0x53    // request to write a block of memory
+#define USB_CMD_MEMST          0x55    // request to set a block of memory with a value
+#define USB_CMD_STARTUP        0x61    // request to jump to the start up function
+
+#define USB_CMD_RX_ETH         0x82    // indicate a RX 802.3 packet
+#define USB_CMD_RX_WLN         0x80    // indicate a RX 802.11 packet
+#define USB_CMD_C2H            0x10    // C2H(device to host) command packet
+#define USB_CMD_MEMRD_RSP      0x50    // response to memory block read command
+#define USB_CMD_MEMWR_RSP      0x52    // response to memory write command
+#define USB_CMD_MEMST_RSP      0x54    // response to memory set command
+#define USB_CMD_STARTED        0x60    // indicate the program has jumped to the given function
+
+
+// TODO: This data structer just for test, we should modify it for the normal driver
+typedef struct _USB_TX_DESC{
+	// u4Byte 0
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	txpktsize:16;       // bit[15:0]
+	u32	offset:8;    		// bit[23:16], store the sizeof(SDIO_TX_DESC)
+	u32	bus_agg_num:8;		// bit[31:24], the bus aggregation number
+#else
+    u32 bus_agg_num:8;      // bit[31:24], the bus aggregation number
+    u32 offset:8;           // bit[23:16], store the sizeof(SDIO_TX_DESC)
+    u32 txpktsize:16;       // bit[15:0]
+#endif
+
+	// u4Byte 1
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+    u32 type:8;             // bit[7:0], the packet type
+    u32 rsvd0:24;
+#else
+    u32 rsvd0:24;
+    u32 type:8;             // bit[7:0], the packet type
+#endif
+
+	// u4Byte 2
+	u32	rsvd1;
+	
+	// u4Byte 3
+	u32	rsvd2;
+	
+	// u4Byte 4
+	u32	rsvd3;
+
+	// u4Byte 5
+	u32	rsvd4;
+} USB_TX_DESC, *PUSB_TX_DESC;
+
+#define SIZE_USB_TX_DESC	sizeof(USB_TX_DESC)
+
+// TODO: This data structer just for test, we should modify it for the normal driver
+typedef struct _USB_RX_DESC{
+	// u4Byte 0
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	pkt_len:16;     // bit[15:0], the packet size
+	u32	offset:8;    	// bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc
+	u32	rsvd0:6;        // bit[29:24]
+	u32	icv:1;          // bit[30], ICV error
+	u32	crc:1;          // bit[31], CRC error
+#else
+	u32	crc:1;          // bit[31], CRC error
+	u32	icv:1;          // bit[30], ICV error
+	u32	rsvd0:6;        // bit[29:24]
+	u32	offset:8;    	// bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc
+	u32	pkt_len:16;     // bit[15:0], the packet size
+#endif
+
+	// u4Byte 1
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	type:8;         // bit[7:0], the type of this packet
+	u32	rsvd1:24;       // bit[31:8]
+#else
+    u32 rsvd1:24;       // bit[31:8]
+    u32 type:8;         // bit[7:0], the type of this packet
+#endif
+
+	// u4Byte 2
+	u32	rsvd2;
+	
+	// u4Byte 3
+	u32	rsvd3;
+	
+	// u4Byte 4
+	u32	rsvd4;
+
+	// u4Byte 5
+	u32	rsvd5;
+} USB_RX_DESC, *PUSB_RX_DESC;
+
+#define SIZE_USB_RX_DESC	sizeof(USB_RX_DESC)
+
+#endif	// #ifndef _RTL8195A_USB_H_
+

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/src/Descript.ion

@@ -4,4 +4,4 @@ hal_misc.c +
 hal_pinmux.c +
 hal_sdio_host.c +
 hal_soc_ps_monitor.c +
-hal_spi_flash_ram.c +-
+hal_spi_flash_ram.c +