Initial commit

lib/fwlib/hal_adc.h

@@ -0,0 +1,319 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_ADC_H_
+#define _HAL_ADC_H_
+
+#include "rtl8195a.h"
+#include "rtl8195a_adc.h"
+#include "hal_gdma.h"
+
+//================ ADC Configuration  =========================
+#define ADC_INTR_OP_TYPE    1
+#define ADC_DMA_OP_TYPE     1
+
+// ADC SAL management macros
+#define SAL_ADC_USER_CB_NUM     (sizeof(SAL_ADC_USER_CB) / sizeof(PSAL_ADC_USERCB_ADPT))
+
+// ADC used module. 
+// Please set the ADC module flag to 1 to enable the related 
+#define ADC0_USED                   1
+#define ADC1_USED                   1
+#define ADC2_USED                   1
+#define ADC3_USED                   1
+
+
+//================ Debug MSG Definition =======================
+#define ADC_PREFIX      "RTL8195A[adc]: "
+#define ADC_PREFIX_LVL  "    [ADC_DBG]: "
+
+typedef enum _ADC_DBG_LVL_ {
+    HAL_ADC_LVL         =   0x01,
+    SAL_ADC_LVL         =   0x02,
+    VERI_ADC_LVL        =   0x04,
+}ADC_DBG_LVL,*PADC_DBG_LVL;
+
+#ifdef CONFIG_DEBUG_LOG
+#ifdef CONFIG_DEBUG_LOG_ADC_HAL
+
+    #define DBG_8195A_ADC(...)  do{ \
+        _DbgDump("\r"ADC_PREFIX __VA_ARGS__);\
+    }while(0)
+
+
+    #define ADCDBGLVL   0xFF   
+    #define DBG_8195A_ADC_LVL(LVL,...)  do{\
+            if (LVL&ADCDBGLVL){\
+                _DbgDump("\r"ADC_PREFIX_LVL __VA_ARGS__);\
+            }\
+    }while(0)
+#else
+    #define DBG_ADC_LOG_PERD    100
+    #define DBG_8195A_ADC(...)
+    #define DBG_8195A_ADC_LVL(...)
+#endif
+#endif
+
+
+//================ ADC HAL Related Enumeration ==================
+// ADC Module Selection 
+typedef enum _ADC_MODULE_SEL_ {
+        ADC0_SEL    =   0x0,
+        ADC1_SEL    =   0x1,
+        ADC2_SEL    =   0x2,
+        ADC3_SEL    =   0x3,
+}ADC_MODULE_SEL,*PADC_MODULE_SEL;
+
+// ADC module status 
+typedef enum _ADC_MODULE_STATUS_ {
+    ADC_DISABLE     =   0x0,
+    ADC_ENABLE      =   0x1,
+}ADC_MODULE_STATUS, *PADC_MODULE_STATUS;
+
+// ADC Data Endian
+typedef enum _ADC_DATA_ENDIAN_ {
+    ADC_DATA_ENDIAN_LITTLE      =   0x0,
+    ADC_DATA_ENDIAN_BIG         =   0x1,
+}ADC_DATA_ENDIAN,*PADC_DATA_ENDIAN;
+
+// ADC Debug Select
+typedef enum _ADC_DEBUG_SEL_ {
+    ADC_DBG_SEL_DISABLE         =   0x0,
+    ADC_DBG_SEL_ENABLE          =   0x1,
+}ADC_DEBUG_SEL,*PADC_DEBUG_SEL;
+
+typedef enum _ADC_COMPARE_SET_ {
+    ADC_COMP_SMALLER_THAN       =   0x0,
+    ADC_COMP_GREATER_THAN       =   0x1,
+}ADC_COMPARE_SET, *PADC_COMPARE_SET;
+
+// ADC feature status 
+typedef enum _ADC_FEATURE_STATUS_{
+    ADC_FEATURE_DISABLED    =   0,
+    ADC_FEATURE_ENABLED     =   1,
+}ADC_FEATURE_STATUS,*PADC_FEATURE_STATUS;
+
+// ADC operation type
+typedef enum _ADC_OP_TYPE_ {
+    ADC_RDREG_TYPE  =   0x0,
+    ADC_DMA_TYPE    =   0x1,
+    ADC_INTR_TYPE   =   0x2,
+}ADC_OP_TYPE, *PADC_OP_TYPE;
+
+// ADC device status 
+typedef enum _ADC_DEVICE_STATUS_ {
+    ADC_STS_UNINITIAL   =   0x00,
+    ADC_STS_INITIALIZED =   0x01,
+    ADC_STS_IDLE        =   0x02,
+    
+    ADC_STS_TX_READY    =   0x03,    
+    ADC_STS_TX_ING      =   0x04,
+    
+    ADC_STS_RX_READY    =   0x05,
+    ADC_STS_RX_ING      =   0x06,
+
+    ADC_STS_ERROR       =   0x07,
+    ADC_STS_FULL        =   0x08,
+}ADC_DEVICE_STATUS, *PADC_DEVICE_STATUS;
+
+// ADC error type
+typedef enum _ADC_ERR_TYPE_ {
+    ADC_ERR_FIFO_RD_ERROR           =   0x40,       //ADC FIFO read error
+}ADC_ERR_TYPE, *PADC_ERR_TYPE;
+
+// ADC initial status
+typedef enum _ADC_INITAIL_STATUS_ {
+    ADC0_INITED     =   0x1,
+    ADC1_INITED     =   0x2,
+    ADC2_INITED     =   0x4,
+    ADC3_INITED     =   0x8,
+}ADC_INITAIL_STATUS, *PADC_INITAIL_STATUS;
+
+
+//================ ADC HAL Data Structure ======================
+// ADC HAL initial data structure
+typedef struct _HAL_ADC_INIT_DAT_ {
+    u8                  ADCIdx;         //ADC index used
+    u8                  ADCEn;          //ADC module enable
+    u8                  ADCEndian;      //ADC endian selection, 
+                                        //but actually it's for 32-bit ADC data swap control
+                                        //1'b0: no swap, 
+                                        //1'b1: swap the upper 16-bit and the lower 16-bit
+    u8                  ADCBurstSz;     //ADC DMA operation threshold
+
+    u8                  ADCCompOnly;    //ADC compare mode only enable (without FIFO enable)
+    u8                  ADCOneShotEn;   //ADC one-shot mode enable
+    u8                  ADCOverWREn;    //ADC overwrite mode enable
+    u8                  ADCOneShotTD;   //ADC one shot mode threshold
+
+    u16                 ADCCompCtrl;    //ADC compare mode control,
+                                        //1'b0:less than the compare threshold
+                                        //1'b1:greater than the compare threshod
+    u16                 ADCCompTD;      //ADC compare mode threshold
+    
+    u8                  ADCDataRate;    //ADC down sample data rate, 
+    u8                  ADCAudioEn;     //ADC audio mode enable
+    u8                  ADCEnManul;     //ADC enable manually
+    u8                  ADCDbgSel;
+    
+    u32                  RSVD0;
+    
+    u32                 *ADCData;       //ADC data pointer
+    u32                 ADCPWCtrl;      //ADC0 power control
+    u32                 ADCIntrMSK;     //ADC Interrupt Mask
+    u32                 ADCAnaParAd3;   //ADC analog parameter 3
+    u32                 ADCInInput;     //ADC Input is internal?
+}HAL_ADC_INIT_DAT,*PHAL_ADC_INIT_DAT;
+
+// ADC HAL Operations
+typedef struct _HAL_ADC_OP_ {
+    RTK_STATUS  (*HalADCInit)       (VOID *Data);   //HAL ADC initialization
+    RTK_STATUS  (*HalADCDeInit)     (VOID *Data);   //HAL ADC de-initialization
+    RTK_STATUS  (*HalADCEnable)     (VOID *Data);   //HAL ADC de-initialization
+    u32         (*HalADCReceive)    (VOID *Data);   //HAL ADC receive
+    RTK_STATUS  (*HalADCIntrCtrl)   (VOID *Data);   //HAL ADC interrupt control
+    u32         (*HalADCReadReg)    (VOID *Data, u8 ADCReg);//HAL ADC read register
+}HAL_ADC_OP, *PHAL_ADC_OP;
+
+// ADC user callback adapter
+typedef struct _SAL_ADC_USERCB_ADPT_ {
+    VOID (*USERCB)      (VOID *Data);
+    u32  USERData;
+}SAL_ADC_USERCB_ADPT, *PSAL_ADC_USERCB_ADPT;
+
+// ADC user callback structure
+typedef struct _SAL_ADC_USER_CB_ {
+    PSAL_ADC_USERCB_ADPT    pTXCB;          //ADC Transmit Callback
+    PSAL_ADC_USERCB_ADPT    pTXCCB;         //ADC Transmit Complete Callback
+    PSAL_ADC_USERCB_ADPT    pRXCB;          //ADC Receive Callback
+    PSAL_ADC_USERCB_ADPT    pRXCCB;         //ADC Receive Complete Callback
+    PSAL_ADC_USERCB_ADPT    pRDREQCB;       //ADC Read Request Callback
+    PSAL_ADC_USERCB_ADPT    pERRCB;         //ADC Error Callback
+    PSAL_ADC_USERCB_ADPT    pDMATXCB;       //ADC DMA Transmit Callback
+    PSAL_ADC_USERCB_ADPT    pDMATXCCB;      //ADC DMA Transmit Complete Callback
+    PSAL_ADC_USERCB_ADPT    pDMARXCB;       //ADC DMA Receive Callback
+    PSAL_ADC_USERCB_ADPT    pDMARXCCB;      //ADC DMA Receive Complete Callback
+}SAL_ADC_USER_CB, *PSAL_ADC_USER_CB;
+
+// ADC Transmit Buffer
+typedef struct _SAL_ADC_TRANSFER_BUF_ {
+    u32     DataLen;                        //ADC Transmfer Length
+    u32     *pDataBuf;                      //ADC Transfer Buffer Pointer
+    u32     RSVD;                           //
+}SAL_ADC_TRANSFER_BUF,*PSAL_ADC_TRANSFER_BUF;
+
+typedef struct _SAL_ADC_DMA_USER_DEF_ {
+    
+    u8      TxDatSrcWdth;
+    u8      TxDatDstWdth;
+    u8      TxDatSrcBstSz;
+    u8      TxDatDstBstSz;
+
+    u8      TxChNo;
+    u8      LlpCtrl;
+    u16     RSVD0;
+
+    u32     MaxMultiBlk;    
+    u32     pLlix;
+    u32     pBlockSizeList;
+}SAL_ADC_DMA_USER_DEF, *PSAL_ADC_DMA_USER_DEF;
+
+// Software API Level ADC Handler 
+typedef struct _SAL_ADC_HND_ {
+    u8                      DevNum;             //ADC device number
+    u8                      PinMux;             //ADC pin mux seletion
+    u8                      OpType;             //ADC operation type selection
+    volatile u8             DevSts;             //ADC device status
+    
+    u32                     ADCExd;             //ADC extended options:
+                                                //bit 0: example
+                                                //bit 31~bit 1: Reserved
+    u32                     ErrType;            //
+    u32                     TimeOut;            //ADC IO Timeout count
+                                                                            
+    PHAL_ADC_INIT_DAT       pInitDat;           //Pointer to ADC initial data struct
+    PSAL_ADC_TRANSFER_BUF   pRXBuf;             //Pointer to ADC TX buffer
+    PSAL_ADC_USER_CB        pUserCB;            //Pointer to ADC User Callback
+}SAL_ADC_HND, *PSAL_ADC_HND;
+
+// ADC SAL handle private 
+typedef struct _SAL_ADC_HND_PRIV_ {
+    VOID            **ppSalADCHnd;              //Pointer to SAL_ADC_HND pointer
+    SAL_ADC_HND     SalADCHndPriv;              //Private SAL_ADC_HND
+}SAL_ADC_HND_PRIV, *PSAL_ADC_HND_PRIV;
+
+//ADC SAL management adapter
+typedef struct _SAL_ADC_MNGT_ADPT_ {
+    PSAL_ADC_HND_PRIV       pSalHndPriv;        //Pointer to SAL_ADC_HND
+    PHAL_ADC_INIT_DAT       pHalInitDat;        //Pointer to HAL ADC initial data( HAL_ADC_INIT_DAT )
+    PHAL_ADC_OP             pHalOp;             //Pointer to HAL ADC operation( HAL_ADC_OP )
+    VOID                    (*pHalOpInit)(VOID*);//Pointer to HAL ADC initialize function
+
+    PIRQ_HANDLE             pIrqHnd;            //Pointer to IRQ handler in SAL layer( IRQ_HANDLE )
+    VOID                    (*pSalIrqFunc)(VOID*);      //Used for SAL ADC interrupt function
+
+    PSAL_ADC_DMA_USER_DEF   pDMAConf;                   //Pointer to DAC User Define DMA config
+    PHAL_GDMA_ADAPTER       pHalGdmaAdp;
+    PHAL_GDMA_OP            pHalGdmaOp;
+    PIRQ_HANDLE             pIrqGdmaHnd;
+    VOID                    (*pHalGdmaOpInit)(VOID*);   //Pointer to HAL DAC initialize function    
+    PSAL_ADC_USER_CB        pUserCB;                    //Pointer to SAL user callbacks (SAL_ADC_USER_CB )
+    VOID                    (*pSalDMAIrqFunc)(VOID*);   //Used for SAL DAC interrupt function
+}SAL_ADC_MNGT_ADPT, *PSAL_ADC_MNGT_ADPT;
+
+
+//================ ADC HAL Function Prototype ===================
+// ADC HAL inline function
+// For checking I2C input index valid or not
+static inline RTK_STATUS
+RtkADCIdxChk(
+    IN  u8  ADCIdx
+)
+{
+#if !ADC0_USED
+    if (ADCIdx == ADC0_SEL)
+        return _EXIT_FAILURE;
+#endif
+
+#if !ADC1_USED
+    if (ADCIdx == ADC1_SEL)
+        return _EXIT_FAILURE;
+#endif
+
+#if !ADC2_USED
+    if (ADCIdx == ADC2_SEL)
+        return _EXIT_FAILURE;
+#endif
+
+#if !ADC3_USED
+        if (ADCIdx == ADC3_SEL)
+            return _EXIT_FAILURE;
+#endif
+
+    return _EXIT_SUCCESS;
+}
+
+VOID HalADCOpInit(IN VOID *Data);
+PSAL_ADC_HND RtkADCGetSalHnd(IN  u8  DACIdx);
+RTK_STATUS RtkADCFreeSalHnd(IN  PSAL_ADC_HND    pSalADCHND);
+RTK_STATUS RtkADCLoadDefault(IN  VOID *Data);
+RTK_STATUS RtkADCInit(IN  VOID *Data);
+RTK_STATUS RtkADCDeInit(IN  VOID *Data);
+//RTK_STATUS RtkADCReceive(IN  VOID *Data);
+u32 RtkADCReceive(IN  VOID *Data);
+u32 RtkADCReceiveBuf(IN  VOID *Data,IN  u32  *pBuf);
+
+PSAL_ADC_MNGT_ADPT RtkADCGetMngtAdpt(IN  u8  ADCIdx);
+RTK_STATUS RtkADCFreeMngtAdpt(IN  PSAL_ADC_MNGT_ADPT  pSalADCMngtAdpt);
+VOID ADCISRHandle(IN  VOID *Data);
+VOID ADCGDMAISRHandle(IN  VOID *Data);
+HAL_Status RtkADCDisablePS(IN  VOID *Data);
+HAL_Status RtkADCEnablePS(IN  VOID *Data);
+
+#endif

lib/fwlib/hal_api.h

@@ -0,0 +1,126 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#ifndef _HAL_API_H_
+#define _HAL_API_H_
+
+#include "basic_types.h"
+#include "hal_irqn.h"
+
+#define HAL_READ32(base, addr)            \
+        rtk_le32_to_cpu(*((volatile u32*)(base + addr)))
+    
+#define HAL_WRITE32(base, addr, value32)  \
+        ((*((volatile u32*)(base + addr))) = rtk_cpu_to_le32(value32))
+
+
+#define HAL_READ16(base, addr)            \
+        rtk_le16_to_cpu(*((volatile u16*)(base + addr)))
+        
+#define HAL_WRITE16(base, addr, value)  \
+        ((*((volatile u16*)(base + addr))) = rtk_cpu_to_le16(value))
+    
+
+#define HAL_READ8(base, addr)            \
+        (*((volatile u8*)(base + addr)))
+            
+#define HAL_WRITE8(base, addr, value)  \
+        ((*((volatile u8*)(base + addr))) = value)
+
+#if 0
+// These "extern _LONG_CALL_" function declaration are for RAM code building only
+// For ROM code building, thses code should be marked off
+extern _LONG_CALL_ u8 
+HalPinCtrlRtl8195A(
+    IN u32  Function, 
+    IN u32  PinLocation, 
+    IN BOOL   Operation
+    );
+
+extern _LONG_CALL_ VOID 
+HalSerialPutcRtl8195a(
+    IN  u8 c
+    );
+
+extern _LONG_CALL_ u8 
+HalSerialGetcRtl8195a(
+    IN  BOOL    PullMode
+    );
+
+extern _LONG_CALL_ u32
+HalSerialGetIsrEnRegRtl8195a(VOID);
+
+extern _LONG_CALL_ VOID
+HalSerialSetIrqEnRegRtl8195a (
+    IN  u32 SetValue
+    );
+
+extern _LONG_CALL_  VOID
+VectorTableInitForOSRtl8195A(
+    IN  VOID *PortSVC,
+    IN  VOID *PortPendSVH,
+    IN  VOID *PortSysTick    
+    );
+
+extern _LONG_CALL_ BOOL
+VectorIrqRegisterRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+    );
+
+extern _LONG_CALL_ BOOL
+VectorIrqUnRegisterRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+    );
+
+extern _LONG_CALL_ VOID
+VectorIrqEnRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+    );
+
+extern _LONG_CALL_  VOID
+VectorIrqDisRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+    );
+#endif
+
+extern BOOLEAN SpicFlashInitRtl8195A(u8 SpicBitMode);
+extern VOID InitWDGIRQ(VOID);
+
+#define PinCtrl HalPinCtrlRtl8195A
+
+#define DiagPutChar	HalSerialPutcRtl8195a
+#define DiagGetChar HalSerialGetcRtl8195a
+#define DiagGetIsrEnReg HalSerialGetIsrEnRegRtl8195a
+#define DiagSetIsrEnReg HalSerialSetIrqEnRegRtl8195a
+
+#define InterruptForOSInit VectorTableInitForOSRtl8195A
+#define InterruptRegister VectorIrqRegisterRtl8195A
+#define InterruptUnRegister  VectorIrqUnRegisterRtl8195A
+
+#define InterruptEn VectorIrqEnRtl8195A
+#define InterruptDis VectorIrqDisRtl8195A
+
+#define SpicFlashInit SpicFlashInitRtl8195A
+#define Calibration32k En32KCalibration
+#define WDGInit InitWDGIRQ
+
+typedef enum  _HAL_Status
+{
+  HAL_OK            = 0x00,
+  HAL_BUSY          = 0x01,
+  HAL_TIMEOUT       = 0x02,
+  HAL_ERR_PARA      = 0x03,     // error with invaild parameters 
+  HAL_ERR_MEM       = 0x04,     // error with memory allocation failed
+  HAL_ERR_HW        = 0x05,     // error with hardware error
+
+  HAL_ERR_UNKNOWN   = 0xee      // unknown error
+  
+} HAL_Status;
+
+
+#endif //_HAL_API_H_

lib/fwlib/hal_common.h

@@ -0,0 +1,17 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_COMMON_H_
+#define _HAL_COMMON_H_
+
+//================= Function Prototype START  ===================
+HAL_Status HalCommonInit(void);
+//================= Function Prototype END     ===================
+
+#endif

lib/fwlib/hal_crypto.h

@@ -0,0 +1,213 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef __HAL_CRYPTO_H__
+#define __HAL_CRYPTO_H__
+
+
+#include "hal_api.h"
+#include "basic_types.h"
+
+
+#define CRYPTO_MAX_MSG_LENGTH		16000
+#define CRYPTO_MD5_DIGEST_LENGTH 	16
+#define CRYPTO_SHA1_DIGEST_LENGTH 	20
+#define CRYPTO_SHA2_DIGEST_LENGTH 	32
+
+
+typedef enum _SHA2_TYPE_ {
+		SHA2_NONE 	= 0,
+		SHA2_224 	= 224/8,
+		SHA2_256 	= 256/8,
+		SHA2_384 	= 384/8,
+		SHA2_512 	= 512/8
+} SHA2_TYPE;
+
+
+#define _ERRNO_CRYPTO_DESC_NUM_SET_OutRange 	-2
+#define _ERRNO_CRYPTO_BURST_NUM_SET_OutRange	-3
+#define _ERRNO_CRYPTO_NULL_POINTER				-4
+#define _ERRNO_CRYPTO_ENGINE_NOT_INIT			-5
+#define _ERRNO_CRYPTO_ADDR_NOT_4Byte_Aligned	-6
+#define _ERRNO_CRYPTO_KEY_OutRange				-7
+#define _ERRNO_CRYPTO_MSG_OutRange				-8
+#define _ERRNO_CRYPTO_IV_OutRange				-9
+#define _ERRNO_CRYPTO_AUTH_TYPE_NOT_MATCH		-10
+#define _ERRNO_CRYPTO_CIPHER_TYPE_NOT_MATCH 	-11
+#define _ERRNO_CRYPTO_KEY_IV_LEN_DIFF			-12
+
+
+
+//
+//	External API Functions
+//
+
+
+// Crypto Engine
+extern int rtl_cryptoEngine_init(void);
+extern void rtl_cryptoEngine_info(void);
+
+
+
+//
+// Authentication 
+//
+
+// md5
+
+extern int rtl_crypto_md5(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+extern int rtl_crypto_md5_init(void);
+extern int rtl_crypto_md5_process(IN const u8* message, const IN u32 msglen, OUT u8* pDigest);
+
+
+// sha1
+extern int rtl_crypto_sha1(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+extern int rtl_crypto_sha1_init(void);
+extern int rtl_crypto_sha1_process(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+// sha2
+
+extern int rtl_crypto_sha2(IN const SHA2_TYPE sha2type, 
+								IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+extern int rtl_crypto_sha2_init(IN const SHA2_TYPE sha2type);
+extern int rtl_crypto_sha2_process(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+
+// HMAC-md5
+extern int rtl_crypto_hmac_md5(IN const u8* message, IN const u32 msglen, 
+									IN const u8* key, IN const u32 keylen, OUT u8* pDigest);
+
+extern int rtl_crypto_hmac_md5_init(IN const u8* key, IN const u32 keylen);
+extern int rtl_crypto_hmac_md5_process(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+
+// HMAC-sha1
+extern int rtl_crypto_hmac_sha1(IN const u8* message, IN const u32 msglen, 
+									IN const u8* key, IN const u32 keylen, OUT u8* pDigest);
+
+extern int rtl_crypto_hmac_sha1_init(IN const u8* key, IN const u32 keylen);
+extern int rtl_crypto_hmac_sha1_process(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+
+// HMAC-sha2
+extern int rtl_crypto_hmac_sha2(IN const SHA2_TYPE sha2type, IN const u8* message, IN const u32 msglen, 
+									IN const u8* key, IN const u32 keylen, OUT u8* pDigest);
+
+extern int rtl_crypto_hmac_sha2_init(IN const SHA2_TYPE sha2type, IN const u8* key, IN const u32 keylen);
+extern int rtl_crypto_hmac_sha2_process(IN const u8* message, IN const u32 msglen, OUT u8* pDigest);
+
+
+//
+// Cipher Functions
+//
+
+// AES - CBC
+
+extern int rtl_crypto_aes_cbc_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_aes_cbc_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_aes_cbc_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// AES - ECB
+
+extern int rtl_crypto_aes_ecb_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_aes_ecb_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_aes_ecb_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// AES - CTR
+
+extern int rtl_crypto_aes_ctr_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_aes_ctr_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_aes_ctr_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// 3DES - CBC
+
+extern int rtl_crypto_3des_cbc_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_3des_cbc_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_3des_cbc_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// 3DES - ECB
+
+extern int rtl_crypto_3des_ecb_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_3des_ecb_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_3des_ecb_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// DES - CBC
+
+extern int rtl_crypto_des_cbc_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_des_cbc_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_des_cbc_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+// DES - ECB
+
+extern int rtl_crypto_des_ecb_init(IN const u8* key, IN const u32 keylen);
+
+extern int rtl_crypto_des_ecb_encrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+extern int rtl_crypto_des_ecb_decrypt(
+	IN const u8* message, IN const u32 msglen, 
+	IN const u8* iv, IN const u32 ivlen, OUT u8* pResult);
+
+
+//
+// C functions in ROM
+//
+
+extern int rtl_memcmpb(const u8 *dst, const u8 *src, int bytes);
+extern int rtl_memcpyb(u8 *dst, const u8 *src, int bytes);
+
+#endif /* __HAL_CRYPTO_H__ */
+

lib/fwlib/hal_dac.h

@@ -0,0 +1,313 @@
+//======================================================
+//  Routines to access hardware
+//
+//  Copyright (c) 2013 Realtek Semiconductor Corp.
+//
+//  This module is a confidential and proprietary property of RealTek and
+//  possession or use of this module requires written permission of RealTek.
+//======================================================
+#ifndef _HAL_DAC_H_
+#define _HAL_DAC_H_
+
+#include "rtl8195a.h"
+#include "rtl8195a_dac.h"
+#include "hal_api.h"
+#include "hal_gdma.h"
+
+//================ DAC Configuration  =========================
+#define DAC_INTR_OP_TYPE    1
+#define DAC_DMA_OP_TYPE     1
+
+// DAC SAL management macros
+#define SAL_DAC_USER_CB_NUM     (sizeof(SAL_DAC_USER_CB) / sizeof(PSAL_DAC_USERCB_ADPT))
+
+// DAC SAL used module. 
+// Please set the DAC module flag to 1 to enable the related DAC module functions.
+#define DAC0_USED                   1
+#define DAC1_USED                   1
+
+
+//================ Debug MSG Definition =======================
+#define DAC_PREFIX      "RTL8195A[dac]: "
+#define DAC_PREFIX_LVL  "    [DAC_DBG]: "
+
+typedef enum _DAC_DBG_LVL_ {
+    HAL_DAC_LVL         =   0x00,
+    SAL_DAC_LVL         =   0x02,
+    VERI_DAC_LVL        =   0x04,
+}DAC_DBG_LVL,*PDAC_DBG_LVL;
+
+#ifdef CONFIG_DEBUG_LOG
+#ifdef CONFIG_DEBUG_LOG_DAC_HAL
+
+    #define DBG_8195A_DAC(...)  do{ \
+        _DbgDump("\r"DAC_PREFIX __VA_ARGS__);\
+    }while(0)
+
+
+    #define DACDBGLVL   0xFF   
+    #define DBG_8195A_DAC_LVL(LVL,...)  do{\
+            if (LVL&DACDBGLVL){\
+                _DbgDump("\r"DAC_PREFIX_LVL __VA_ARGS__);\
+            }\
+    }while(0)
+#else
+    #define DBG_DAC_LOG_PERD    100
+    #define DBG_8195A_DAC(...)
+    #define DBG_8195A_DAC_LVL(...)
+#endif
+#endif
+
+
+//================ DAC HAL Related Enumeration ==================
+// DAC Module Selection 
+typedef enum _DAC_MODULE_SEL_ {
+        DAC0_SEL    =   0x0,
+        DAC1_SEL    =   0x1,
+}DAC_MODULE_SEL,*PDAC_MODULE_SEL;
+
+// DAC module status 
+typedef enum _DAC_MODULE_STATUS_ {
+    DAC_DISABLE     =   0x0,
+    DAC_ENABLE      =   0x1,
+}DAC_MODULE_STATUS, *PDAC_MODULE_STATUS;
+
+// DAC Data Rate
+typedef enum _DAC_DATA_RATE_ {
+    DAC_DATA_RATE_10K   =   0x0,
+    DAC_DATA_RATE_250K  =   0x1,
+}DAC_DATA_RATE,*PDAC_DATA_RATE;
+
+// DAC Data Endian
+typedef enum _DAC_DATA_ENDIAN_ {
+    DAC_DATA_ENDIAN_LITTLE      =   0x0,
+    DAC_DATA_ENDIAN_BIG         =   0x1,
+}DAC_DATA_ENDIAN,*PDAC_DATA_ENDIAN;
+
+// DAC Debug Select
+typedef enum _DAC_DEBUG_SEL_ {
+    DAC_DBG_SEL_DISABLE         =   0x0,
+    DAC_DBG_SEL_ENABLE          =   0x1,
+}DAC_DEBUG_SEL,*PDAC_DEBUG_SEL;
+
+// DAC Dsc Debug Select
+typedef enum _DAC_DSC_DEBUG_SEL_ {
+    DAC_DSC_DBG_SEL_DISABLE         =   0x0,
+    DAC_DSC_DBG_SEL_ENABLE          =   0x1,
+}DAC_DSC_DEBUG_SEL,*PDAC_DSC_DEBUG_SEL;
+
+
+// DAC Bypass Dsc Debug Select
+typedef enum _DAC_BYPASS_DSC_SEL_ {
+    DAC_BYPASS_DSC_SEL_DISABLE          =   0x0,
+    DAC_BYPASS_DSC_SEL_ENABLE           =   0x1,
+}DAC_BYPASS_DSC_SEL,*PDAC_BYPASS_DSC_SEL;
+
+// DAC feature status 
+typedef enum _DAC_FEATURE_STATUS_{
+    DAC_FEATURE_DISABLED    =   0,
+    DAC_FEATURE_ENABLED     =   1,
+}DAC_FEATURE_STATUS,*PDAC_FEATURE_STATUS;
+
+// DAC operation type
+typedef enum _DAC_OP_TYPE_ {
+    DAC_POLL_TYPE   =   0x0,
+    DAC_DMA_TYPE    =   0x1,
+    DAC_INTR_TYPE   =   0x2,
+}DAC_OP_TYPE, *PDAC_OP_TYPE;
+
+// DAC device status 
+typedef enum _DAC_Device_STATUS_ {
+    DAC_STS_UNINITIAL   =   0x00,
+    DAC_STS_INITIALIZED =   0x01,
+    DAC_STS_IDLE        =   0x02,
+    
+    DAC_STS_TX_READY    =   0x03,    
+    DAC_STS_TX_ING      =   0x04,
+    
+    DAC_STS_RX_READY    =   0x05,
+    DAC_STS_RX_ING      =   0x06,
+
+    DAC_STS_ERROR       =   0x07,
+}DAC_Device_STATUS, *PDAC_Device_STATUS;
+
+//DAC device error type
+typedef enum _DAC_ERR_TYPE_ {
+    DAC_ERR_FIFO_OVER       =   0x04,       //DAC FIFO overflow.
+    DAC_ERR_FIFO_STOP       =   0x08,       //DAC FIFO is completely empty, and it will be stopped automatically.
+    DAC_ERR_FIFO_WRFAIL     =   0x10,       //When DAC is NOT enabled, a write operation attempts to access DAC register.
+    DAC_ERR_FIFO_DSC_OVER0  =   0x20,
+    DAC_ERR_FIFO_DSC_OVER1  =   0x40,
+}DAC_ERR_TYPE, *PDAC_ERR_TYPE;
+
+// DAC data input method
+typedef enum _DAC_INPUT_TYPE_{
+    DAC_INPUT_SINGLE_WR     =   0x1,        //DAC input by using single register write
+    DAC_INPUT_DMA_ONEBLK    =   0x2,        //DAC input by using single DMA block
+    DAC_INPUT_DMA_LLP       =   0x3,        //DAC input by using DMA linked list mode
+}DAC_INPUT_TYPE,*PDAC_INPUT_TYPE;
+
+
+
+
+//======================================================
+// DAC HAL initial data structure 
+typedef struct _HAL_DAC_INIT_DAT_ {
+    u8                  DACIdx;         //DAC index used
+    u8                  DACEn;          //DAC module enable
+    u8                  DACDataRate;    //DAC data rate, 1'b0:10KHz, 1'b1:250KHz
+    u8                  DACEndian;      //DAC endian selection, 
+                                        //but actually it's for 32-bit DAC data swap control
+                                        //1'b0: no swap, 
+                                        //1'b1: swap the upper 16-bit and the lower 16-bit
+    u8                  DACFilterSet;   //DAC filter settle
+    u8                  DACBurstSz;     //DAC burst size
+    u8                  DACDbgSel;      //DAC debug sel
+    u8                  DACDscDbgSel;   //DAC debug dsc sel
+    
+    u8                  DACBPDsc;       //DAC bypass delta sigma for loopback
+    u8                  DACDeltaSig;    //DAC bypass value of delta sigma
+    u16                 RSVD1;          
+
+
+    
+    u32                 *DACData;       //DAC data pointer
+    u32                 DACPWCtrl;      //DAC0 and DAC1 power control
+    u32                 DACAnaCtrl0;    //DAC anapar_da control 0
+    u32                 DACAnaCtrl1;    //DAC anapar_da control 1
+    u32                 DACIntrMSK;     //DAC Interrupt Mask
+}HAL_DAC_INIT_DAT,*PHAL_DAC_INIT_DAT;
+
+// DAC HAL Operations
+typedef struct _HAL_DAC_OP_ {
+    RTK_STATUS  (*HalDACInit)       (VOID *Data);   //HAL DAC initialization
+    RTK_STATUS  (*HalDACDeInit)     (VOID *Data);   //HAL DAC de-initialization
+    RTK_STATUS  (*HalDACEnable)     (VOID *Data);   //HAL DAC de-initialization
+    u8          (*HalDACSend)       (VOID *Data);   //HAL DAC receive
+    RTK_STATUS  (*HalDACIntrCtrl)   (VOID *Data);   //HAL DAC interrupt control
+    u32         (*HalDACReadReg)    (VOID *Data, u8 DACReg);//HAL DAC read register
+}HAL_DAC_OP, *PHAL_DAC_OP;
+
+// DAC user callback adapter
+typedef struct _SAL_DAC_USERCB_ADPT_ {
+    VOID (*USERCB)      (VOID *Data);
+    u32  USERData;
+}SAL_DAC_USERCB_ADPT, *PSAL_DAC_USERCB_ADPT;
+
+// DAC user callback structure
+typedef struct _SAL_DAC_USER_CB_ {
+    PSAL_DAC_USERCB_ADPT    pTXCB;          //DAC Transmit Callback
+    PSAL_DAC_USERCB_ADPT    pTXCCB;         //DAC Transmit Complete Callback
+    PSAL_DAC_USERCB_ADPT    pRXCB;          //DAC Receive Callback
+    PSAL_DAC_USERCB_ADPT    pRXCCB;         //DAC Receive Complete Callback
+    PSAL_DAC_USERCB_ADPT    pRDREQCB;       //DAC Read Request Callback
+    PSAL_DAC_USERCB_ADPT    pERRCB;         //DAC Error Callback
+    PSAL_DAC_USERCB_ADPT    pDMATXCB;       //DAC DMA Transmit Callback
+    PSAL_DAC_USERCB_ADPT    pDMATXCCB;      //DAC DMA Transmit Complete Callback
+    PSAL_DAC_USERCB_ADPT    pDMARXCB;       //DAC DMA Receive Callback
+    PSAL_DAC_USERCB_ADPT    pDMARXCCB;      //DAC DMA Receive Complete Callback
+}SAL_DAC_USER_CB, *PSAL_DAC_USER_CB;
+
+// DAC Transmit Buffer
+typedef struct _SAL_DAC_TRANSFER_BUF_ {
+    u32     DataLen;                        //DAC Transmfer Length
+    u32     *pDataBuf;                      //DAC Transfer Buffer Pointer
+    u32     RSVD;                           //
+}SAL_DAC_TRANSFER_BUF,*PSAL_DAC_TRANSFER_BUF;
+
+typedef struct _SAL_DAC_DMA_USER_DEF_ {
+    
+    u8      TxDatSrcWdth;
+    u8      TxDatDstWdth;
+    u8      TxDatSrcBstSz;
+    u8      TxDatDstBstSz;
+
+    u8      TxChNo;
+    u8      LlpCtrl;
+    u16     RSVD0;
+
+    u32     MaxMultiBlk;    
+    u32     pLlix;
+    u32     pBlockSizeList;
+}SAL_DAC_DMA_USER_DEF, *PSAL_DAC_DMA_USER_DEF;
+
+// Software API Level DAC Handler 
+typedef struct _SAL_DAC_HND_ {
+    u8                      DevNum;             //DAC device number
+    u8                      PinMux;             //DAC pin mux seletion
+    u8                      OpType;             //DAC operation type selection
+    volatile u8             DevSts;             //DAC device status
+
+    u8                      DACInType;          //DAC input type
+    u8                      RSVD0;
+    u16                     RSVD1;
+    
+    u32                     DACExd;             //DAC extended options:
+                                                //bit 0: example
+                                                //bit 31~bit 1: Reserved
+    u32                     ErrType;            //
+    u32                     TimeOut;            //DAC IO Timeout count
+                                                                            
+    PHAL_DAC_INIT_DAT       pInitDat;           //Pointer to DAC initial data struct
+    PSAL_DAC_TRANSFER_BUF   pTXBuf;             //Pointer to DAC TX buffer
+    PSAL_DAC_USER_CB        pUserCB;            //Pointer to DAC User Callback
+    PSAL_DAC_DMA_USER_DEF   pDMAConf;           //Pointer to DAC User Define DMA Config
+}SAL_DAC_HND, *PSAL_DAC_HND;
+
+// DAC SAL handle private 
+typedef struct _SAL_DAC_HND_PRIV_ {
+    VOID            **ppSalDACHnd;              //Pointer to SAL_DAC_HND pointer
+    SAL_DAC_HND     SalDACHndPriv;              //Private SAL_DAC_HND
+}SAL_DAC_HND_PRIV, *PSAL_DAC_HND_PRIV;
+
+//DAC SAL management adapter
+typedef struct _SAL_DAC_MNGT_ADPT_ {
+    PSAL_DAC_HND_PRIV       pSalHndPriv;                //Pointer to SAL_DAC_HND
+    PHAL_DAC_INIT_DAT       pHalInitDat;                //Pointer to HAL DAC initial data( HAL_I2C_INIT_DAT )
+    PHAL_DAC_OP             pHalOp;                     //Pointer to HAL DAC operation( HAL_DAC_OP )
+    VOID                    (*pHalOpInit)(VOID*);       //Pointer to HAL DAC initialize function
+    PIRQ_HANDLE             pIrqHnd;                    //Pointer to IRQ handler in SAL layer( IRQ_HANDLE )
+    PSAL_DAC_USER_CB        pUserCB;                    //Pointer to SAL user callbacks (SAL_DAC_USER_CB )
+    VOID                    (*pSalIrqFunc)(VOID*);      //Used for SAL DAC interrupt function
+
+    PSAL_DAC_DMA_USER_DEF   pDMAConf;                   //Pointer to DAC User Define DMA config
+    PHAL_GDMA_ADAPTER       pHalGdmaAdp;
+    PHAL_GDMA_OP            pHalGdmaOp;
+    VOID                    (*pHalGdmaOpInit)(VOID*);   //Pointer to HAL DAC initialize function    
+    PIRQ_HANDLE             pIrqGdmaHnd;
+    VOID                    (*pSalDMAIrqFunc)(VOID*);   //Used for SAL DAC interrupt function
+}SAL_DAC_MNGT_ADPT, *PSAL_DAC_MNGT_ADPT;
+
+
+//================ DAC HAL Function Prototype ===================
+// DAC HAL inline function
+// For checking DAC input index valid or not
+static inline RTK_STATUS
+RtkDACIdxChk(
+    IN  u8  DACIdx
+)
+{
+#if !DAC0_USED
+    if (DACIdx == DAC0_SEL)
+        return _EXIT_FAILURE;
+#endif
+
+#if !DAC1_USED
+    if (DACIdx == DAC1_SEL)
+        return _EXIT_FAILURE;
+#endif
+        
+    return _EXIT_SUCCESS;
+}
+
+VOID HalDACOpInit(IN VOID *Data);
+RTK_STATUS RtkDACLoadDefault(IN  VOID *Data);
+RTK_STATUS RtkDACInit(IN  VOID *Data);
+RTK_STATUS RtkDACDeInit(IN  VOID *Data);
+RTK_STATUS RtkDACSend(IN  VOID *Data);
+PSAL_DAC_HND RtkDACGetSalHnd(IN  u8  DACIdx);
+RTK_STATUS RtkDACFreeSalHnd(IN  PSAL_DAC_HND    pSalDACHND);
+PSAL_DAC_MNGT_ADPT RtkDACGetMngtAdpt(IN  u8  DACIdx);
+RTK_STATUS RtkDACFreeMngtAdpt(IN  PSAL_DAC_MNGT_ADPT  pSalDACMngtAdpt);
+
+#endif

lib/fwlib/hal_diag.h

@@ -0,0 +1,107 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_DIAG_H_
+#define _HAL_DIAG_H_
+
+
+//Register offset
+#define UART_REV_BUF_OFF            0x00
+#define UART_TRAN_HOLD_OFF          0x00
+#define UART_DLH_OFF                0x04
+#define UART_DLL_OFF                0x00
+#define UART_INTERRUPT_EN_REG_OFF   0x04
+#define UART_INTERRUPT_IDEN_REG_OFF 0x08
+#define UART_FIFO_CTL_REG_OFF       0x08
+#define UART_LINE_CTL_REG_OFF       0x0c
+#define UART_MODEM_CTL_REG_OFF      0x10
+#define UART_LINE_STATUS_REG_OFF    0x14
+#define UART_MODEM_STATUS_REG_OFF   0x18
+#define UART_FIFO_ACCESS_REG_OFF    0x70
+#define UART_STATUS_REG_OFF         0x7c
+#define UART_TFL_OFF                0x80
+#define UART_RFL_OFF                0x84
+
+
+//Buad rate
+#define UART_BAUD_RATE_2400         2400
+#define UART_BAUD_RATE_4800         4800
+#define UART_BAUD_RATE_9600         9600
+#define UART_BAUD_RATE_19200        19200
+#define UART_BAUD_RATE_38400        38400
+#define UART_BAUD_RATE_57600        57600
+#define UART_BAUD_RATE_115200       115200
+#define UART_BAUD_RATE_921600       921600
+#define UART_BAUD_RATE_1152000      1152000
+
+#define UART_PARITY_ENABLE          0x08
+#define UART_PARITY_DISABLE         0
+
+#define UART_DATA_LEN_5BIT          0x0
+#define UART_DATA_LEN_6BIT          0x1
+#define UART_DATA_LEN_7BIT          0x2
+#define UART_DATA_LEN_8BIT          0x3
+
+#define UART_STOP_1BIT              0x0
+#define UART_STOP_2BIT              0x4
+
+
+#define HAL_UART_READ32(addr)            HAL_READ32(LOG_UART_REG_BASE, addr)
+#define HAL_UART_WRITE32(addr, value)    HAL_WRITE32(LOG_UART_REG_BASE, addr, value)
+#define HAL_UART_READ16(addr)            HAL_READ16(LOG_UART_REG_BASE, addr)
+#define HAL_UART_WRITE16(addr, value)    HAL_WRITE16(LOG_UART_REG_BASE, addr, value)
+#define HAL_UART_READ8(addr)             HAL_READ8(LOG_UART_REG_BASE, addr)
+#define HAL_UART_WRITE8(addr, value)     HAL_WRITE8(LOG_UART_REG_BASE, addr, value)
+
+typedef struct _LOG_UART_ADAPTER_ {
+    u32     BaudRate;
+    u32     FIFOControl; 
+    u32     IntEnReg;
+    u8      Parity;
+    u8      Stop;
+    u8      DataLength;
+}LOG_UART_ADAPTER, *PLOG_UART_ADAPTER;
+
+typedef struct _COMMAND_TABLE_ {
+    const   u8* cmd;
+    u16     ArgvCnt;
+    u32     (*func)(u16 argc, u8* argv[]);
+    const   u8* msg;
+}COMMAND_TABLE, *PCOMMAND_TABLE;
+
+//VOID
+//HalLogUartHandle(void);
+
+/*
+extern _LONG_CALL_ROM_ u32 
+HalLogUartInit(
+    IN  LOG_UART_ADAPTER    UartAdapter
+    );
+*/
+
+extern _LONG_CALL_ROM_ VOID 
+HalSerialPutcRtl8195a(
+    IN  u8 c
+    );
+
+extern _LONG_CALL_ROM_ u8 
+HalSerialGetcRtl8195a(
+    IN  BOOL    PullMode
+    );
+
+extern _LONG_CALL_ROM_ u32
+HalSerialGetIsrEnRegRtl8195a(VOID);
+
+extern _LONG_CALL_ROM_ VOID
+HalSerialSetIrqEnRegRtl8195a (
+    IN  u32 SetValue
+);
+
+
+#endif//_HAL_DIAG_H_

lib/fwlib/hal_efuse.h

@@ -0,0 +1,22 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_EFUSE_H_
+#define _HAL_EFUSE_H_
+
+_LONG_CALL_ROM_ extern VOID HalEFUSEPowerSwitch8195AROM(IN u8 bWrite, IN u8 PwrState, IN u8 L25OutVoltage);
+_LONG_CALL_ extern u32 HALEFUSEOneByteReadROM(IN	u32 CtrlSetting, IN	u16 Addr, OUT u8 *Data, IN u8 L25OutVoltage);
+_LONG_CALL_ extern u32 HALEFUSEOneByteWriteROM(IN	u32 CtrlSetting, IN	u16 Addr, IN u8 Data, IN u8 L25OutVoltage);
+
+#define EFUSERead8     HALEFUSEOneByteReadROM
+#define EFUSEWrite8    HALEFUSEOneByteWriteROM
+
+#define L25EOUTVOLTAGE	7
+#endif
+

lib/fwlib/hal_gdma.h

@@ -0,0 +1,141 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_GDMA_H_
+#define _HAL_GDMA_H_
+
+#include "rtl8195a_gdma.h"
+
+typedef struct _GDMA_CH_LLI_ELE_ {
+    u32                   Sarx;
+    u32                   Darx;
+    u32                   Llpx;
+    u32                   CtlxLow;
+    u32                   CtlxUp;
+    u32                   Temp;
+}GDMA_CH_LLI_ELE, *PGDMA_CH_LLI_ELE;
+#if 1
+#if 0
+typedef struct _GDMA_CH_LLI_ {
+    PGDMA_CH_LLI_ELE      pLliEle;
+    PGDMA_CH_LLI          pNextLli;
+}GDMA_CH_LLI, *PGDMA_CH_LLI;
+
+typedef struct _BLOCK_SIZE_LIST_ {
+    u32                  BlockSize;
+    PBLOCK_SIZE_LIST     pNextBlockSiz;
+}BLOCK_SIZE_LIST, *PBLOCK_SIZE_LIST;
+#else
+struct GDMA_CH_LLI {
+    PGDMA_CH_LLI_ELE                pLliEle;
+    struct GDMA_CH_LLI             *pNextLli;
+};
+
+struct BLOCK_SIZE_LIST {
+    u32                             BlockSize;
+    struct BLOCK_SIZE_LIST          *pNextBlockSiz;
+};
+
+#endif
+
+#endif
+typedef struct _HAL_GDMA_ADAPTER_ {
+    u32                   ChSar;
+    u32                   ChDar;
+    GDMA_CHANNEL_NUM      ChEn;
+    GDMA_CTL_REG          GdmaCtl;
+    GDMA_CFG_REG          GdmaCfg;
+    u32                   PacketLen;
+    u32                   BlockLen;
+    u32                   MuliBlockCunt;
+    u32                   MaxMuliBlock;
+    struct GDMA_CH_LLI          *pLlix;
+    struct BLOCK_SIZE_LIST      *pBlockSizeList;
+
+    PGDMA_CH_LLI_ELE            pLli;
+    u32                         NextPlli;
+    u8                    TestItem;
+    u8                          ChNum;
+    u8                          GdmaIndex;
+    u8                          IsrCtrl:1;
+    u8                          GdmaOnOff:1;
+    u8                          Llpctrl:1;
+    u8                          Lli0:1;
+    u8                          Rsvd4to7:4;
+    u8                          GdmaIsrType;
+}HAL_GDMA_ADAPTER, *PHAL_GDMA_ADAPTER;
+
+typedef struct _HAL_GDMA_CHNL_ {
+    u8 GdmaIndx;
+    u8 GdmaChnl;
+    u8 IrqNum;
+    u8 Reserved;
+}HAL_GDMA_CHNL, *PHAL_GDMA_CHNL;
+
+typedef struct _HAL_GDMA_BLOCK_ {
+    u32 SrcAddr;
+    u32 DstAddr;
+    u32 BlockLength;
+    u32 SrcOffset;
+    u32 DstOffset;
+}HAL_GDMA_BLOCK, *PHAL_GDMA_BLOCK;
+
+typedef struct _HAL_GDMA_OP_ {
+    VOID (*HalGdmaOnOff)(VOID *Data);
+    BOOL (*HalGdamChInit)(VOID *Data);
+    BOOL (*HalGdmaChSeting)(VOID *Data);
+    BOOL (*HalGdmaChBlockSeting)(VOID *Data);
+    VOID (*HalGdmaChDis)(VOID *Data);
+    VOID (*HalGdmaChEn)(VOID *Data);
+    VOID (*HalGdmaChIsrEnAndDis) (VOID *Data);
+    u8   (*HalGdmaChIsrClean)(VOID *Data);
+    VOID (*HalGdmaChCleanAutoSrc)(VOID *Data);
+    VOID (*HalGdmaChCleanAutoDst)(VOID *Data);
+}HAL_GDMA_OP, *PHAL_GDMA_OP;
+
+typedef struct _HAL_GDMA_OBJ_ {
+    HAL_GDMA_ADAPTER HalGdmaAdapter;
+    IRQ_HANDLE GdmaIrqHandle;
+    volatile GDMA_CH_LLI_ELE GdmaChLli[16];
+    struct GDMA_CH_LLI Lli[16];
+    struct BLOCK_SIZE_LIST BlockSizeList[16];
+    u8 Busy;      // is transfering
+    u8 BlockNum;
+} HAL_GDMA_OBJ, *PHAL_GDMA_OBJ;
+
+VOID HalGdmaOpInit(IN  VOID *Data);
+VOID HalGdmaOn(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaOff(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+BOOL HalGdmaChInit(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+BOOL HalGdmaChSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+BOOL HalGdmaChBlockSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChIsrEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChIsrDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+u8 HalGdmaChIsrClean(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChCleanAutoSrc(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+VOID HalGdmaChCleanAutoDst(PHAL_GDMA_ADAPTER pHalGdmaAdapter);
+
+extern HAL_Status HalGdmaChnlRegister (u8 GdmaIdx, u8 ChnlNum);
+extern VOID HalGdmaChnlUnRegister (u8 GdmaIdx, u8 ChnlNum);
+extern PHAL_GDMA_CHNL HalGdmaChnlAlloc (HAL_GDMA_CHNL *pChnlOption);
+extern VOID HalGdmaChnlFree (HAL_GDMA_CHNL *pChnl);
+extern BOOL HalGdmaMemCpyInit(PHAL_GDMA_OBJ pHalGdmaObj);
+extern VOID HalGdmaMemCpyDeInit(PHAL_GDMA_OBJ pHalGdmaObj);
+extern VOID* HalGdmaMemCpy(PHAL_GDMA_OBJ pHalGdmaObj, void* pDest, void* pSrc, u32 len);
+extern VOID HalGdmaMemAggr(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock);
+extern BOOL HalGdmaMemCpyAggrInit(PHAL_GDMA_OBJ pHalGdmaObj);
+
+extern const HAL_GDMA_OP _HalGdmaOp;
+extern const HAL_GDMA_CHNL GDMA_Chnl_Option[];
+extern const HAL_GDMA_CHNL GDMA_Multi_Block_Chnl_Option[];
+extern const u16 HalGdmaChnlEn[6];
+
+#endif

lib/fwlib/hal_gpio.h

@@ -0,0 +1,236 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_GPIO_H_
+#define _HAL_GPIO_H_
+
+#define HAL_GPIO_PIN_INT_MODE       0x80
+
+typedef enum {
+    _PORT_A = 0,
+    _PORT_B = 1,
+    _PORT_C = 2,
+    _PORT_D = 3,
+    _PORT_E = 4,
+    _PORT_F = 5,
+    _PORT_G = 6,
+    _PORT_H = 7,
+    _PORT_I = 8,
+    _PORT_J = 9,
+    _PORT_K = 10,
+
+    _PORT_MAX
+} HAL_GPIO_PORT_NAME;
+
+typedef enum {
+    _PA_0  = (_PORT_A<<4|0),
+    _PA_1  = (_PORT_A<<4|1),
+    _PA_2  = (_PORT_A<<4|2),
+    _PA_3  = (_PORT_A<<4|3),
+    _PA_4  = (_PORT_A<<4|4),
+    _PA_5  = (_PORT_A<<4|5),
+    _PA_6  = (_PORT_A<<4|6),
+    _PA_7  = (_PORT_A<<4|7),
+
+    _PB_0  = (_PORT_B<<4|0),
+    _PB_1  = (_PORT_B<<4|1),
+    _PB_2  = (_PORT_B<<4|2),
+    _PB_3  = (_PORT_B<<4|3),
+    _PB_4  = (_PORT_B<<4|4),
+    _PB_5  = (_PORT_B<<4|5),
+    _PB_6  = (_PORT_B<<4|6),
+    _PB_7  = (_PORT_B<<4|7),
+
+    _PC_0  = (_PORT_C<<4|0),
+    _PC_1  = (_PORT_C<<4|1),
+    _PC_2  = (_PORT_C<<4|2),
+    _PC_3  = (_PORT_C<<4|3),
+    _PC_4  = (_PORT_C<<4|4),
+    _PC_5  = (_PORT_C<<4|5),
+    _PC_6  = (_PORT_C<<4|6),
+    _PC_7  = (_PORT_C<<4|7),
+    _PC_8  = (_PORT_C<<4|8),
+    _PC_9  = (_PORT_C<<4|9),
+
+    _PD_0  = (_PORT_D<<4|0),
+    _PD_1  = (_PORT_D<<4|1),
+    _PD_2  = (_PORT_D<<4|2),
+    _PD_3  = (_PORT_D<<4|3),
+    _PD_4  = (_PORT_D<<4|4),
+    _PD_5  = (_PORT_D<<4|5),
+    _PD_6  = (_PORT_D<<4|6),
+    _PD_7  = (_PORT_D<<4|7),
+    _PD_8  = (_PORT_D<<4|8),
+    _PD_9  = (_PORT_D<<4|9),
+  
+    _PE_0  = (_PORT_E<<4|0),
+    _PE_1  = (_PORT_E<<4|1),
+    _PE_2  = (_PORT_E<<4|2),
+    _PE_3  = (_PORT_E<<4|3),
+    _PE_4  = (_PORT_E<<4|4),
+    _PE_5  = (_PORT_E<<4|5),
+    _PE_6  = (_PORT_E<<4|6),
+    _PE_7  = (_PORT_E<<4|7),
+    _PE_8  = (_PORT_E<<4|8),
+    _PE_9  = (_PORT_E<<4|9),
+    _PE_A  = (_PORT_E<<4|10),
+  
+    _PF_0  = (_PORT_F<<4|0),
+    _PF_1  = (_PORT_F<<4|1),
+    _PF_2  = (_PORT_F<<4|2),
+    _PF_3  = (_PORT_F<<4|3),
+    _PF_4  = (_PORT_F<<4|4),
+    _PF_5  = (_PORT_F<<4|5),
+//    _PF_6  = (_PORT_F<<4|6),
+//    _PF_7  = (_PORT_F<<4|7),
+
+    _PG_0  = (_PORT_G<<4|0),
+    _PG_1  = (_PORT_G<<4|1),
+    _PG_2  = (_PORT_G<<4|2),
+    _PG_3  = (_PORT_G<<4|3),
+    _PG_4  = (_PORT_G<<4|4),
+    _PG_5  = (_PORT_G<<4|5),
+    _PG_6  = (_PORT_G<<4|6),
+    _PG_7  = (_PORT_G<<4|7),
+
+    _PH_0  = (_PORT_H<<4|0),
+    _PH_1  = (_PORT_H<<4|1),
+    _PH_2  = (_PORT_H<<4|2),
+    _PH_3  = (_PORT_H<<4|3),
+    _PH_4  = (_PORT_H<<4|4),
+    _PH_5  = (_PORT_H<<4|5),
+    _PH_6  = (_PORT_H<<4|6),
+    _PH_7  = (_PORT_H<<4|7),
+
+    _PI_0  = (_PORT_I<<4|0),
+    _PI_1  = (_PORT_I<<4|1),
+    _PI_2  = (_PORT_I<<4|2),
+    _PI_3  = (_PORT_I<<4|3),
+    _PI_4  = (_PORT_I<<4|4),
+    _PI_5  = (_PORT_I<<4|5),
+    _PI_6  = (_PORT_I<<4|6),
+    _PI_7  = (_PORT_I<<4|7),
+
+    _PJ_0  = (_PORT_J<<4|0),
+    _PJ_1  = (_PORT_J<<4|1),
+    _PJ_2  = (_PORT_J<<4|2),
+    _PJ_3  = (_PORT_J<<4|3),
+    _PJ_4  = (_PORT_J<<4|4),
+    _PJ_5  = (_PORT_J<<4|5),
+    _PJ_6  = (_PORT_J<<4|6),
+//    _PJ_7  = (_PORT_J<<4|7),
+
+    _PK_0  = (_PORT_K<<4|0),
+    _PK_1  = (_PORT_K<<4|1),
+    _PK_2  = (_PORT_K<<4|2),
+    _PK_3  = (_PORT_K<<4|3),
+    _PK_4  = (_PORT_K<<4|4),
+    _PK_5  = (_PORT_K<<4|5),
+    _PK_6  = (_PORT_K<<4|6),
+//    _PK_7  = (_PORT_K<<4|7),
+
+    // Not connected
+    _PIN_NC = (int)0xFFFFFFFF
+} HAL_PIN_NAME;
+
+typedef enum
+{
+  GPIO_PIN_LOW  = 0,
+  GPIO_PIN_HIGH = 1,
+  GPIO_PIN_ERR  = 2     // read Pin error
+} HAL_GPIO_PIN_STATE;
+
+typedef enum {
+    DIN_PULL_NONE   = 0,    //floating or high impedance ?
+    DIN_PULL_LOW    = 1,
+    DIN_PULL_HIGH   = 2,
+
+    DOUT_PUSH_PULL  = 3,
+    DOUT_OPEN_DRAIN = 4,
+
+    INT_LOW         = (5|HAL_GPIO_PIN_INT_MODE),    // Interrupt Low level trigger
+    INT_HIGH        = (6|HAL_GPIO_PIN_INT_MODE),    // Interrupt High level trigger
+    INT_FALLING     = (7|HAL_GPIO_PIN_INT_MODE),    // Interrupt Falling edge trigger
+    INT_RISING      = (8|HAL_GPIO_PIN_INT_MODE)     // Interrupt Rising edge trigger        
+} HAL_GPIO_PIN_MODE;
+
+enum {
+    GPIO_PORT_A = 0,
+    GPIO_PORT_B = 1,
+    GPIO_PORT_C = 2,
+    GPIO_PORT_D = 3
+};
+
+typedef enum {
+    hal_PullNone  = 0,
+    hal_PullUp    = 1,
+    hal_PullDown  = 2,
+    hal_OpenDrain = 3,
+    hal_PullDefault = hal_PullNone
+} HAL_PinMode;
+
+typedef struct _HAL_GPIO_PORT_ {
+    u32 out_data;       // to write the GPIO port
+    u32 in_data;        // to read the GPIO port
+    u32 dir;            // config each pin direction    
+}HAL_GPIO_PORT, *PHAL_GPIO_PORT;
+
+#define HAL_GPIO_PIN_NAME(port,pin)         (((port)<<5)|(pin))
+#define HAL_GPIO_GET_PORT_BY_NAME(x)        ((x>>5) & 0x03)
+#define HAL_GPIO_GET_PIN_BY_NAME(x)         (x & 0x1f)
+
+typedef struct _HAL_GPIO_PIN_ {
+    HAL_GPIO_PIN_MODE pin_mode;
+    u32 pin_name;    // Pin: [7:5]: port number, [4:0]: pin number
+}HAL_GPIO_PIN, *PHAL_GPIO_PIN;
+
+typedef struct _HAL_GPIO_OP_ {
+#if defined(__ICCARM__)
+    void* dummy;
+#endif
+}HAL_GPIO_OP, *PHAL_GPIO_OP;
+
+typedef void (*GPIO_IRQ_FUN)(VOID *Data, u32 Id);
+typedef void (*GPIO_USER_IRQ_FUN)(u32 Id);
+
+typedef struct _HAL_GPIO_ADAPTER_ {
+    IRQ_HANDLE IrqHandle;   // GPIO HAL IRQ Handle
+    GPIO_USER_IRQ_FUN UserIrqHandler;   // GPIO IRQ Handler
+    GPIO_IRQ_FUN PortA_IrqHandler[32]; // The interrupt handler triggered by Port A[x]
+    VOID *PortA_IrqData[32];
+    VOID (*EnterCritical)(void);
+    VOID (*ExitCritical)(void);
+    u32 Local_Gpio_Dir[3];  // to record direction setting: 0- IN, 1- Out
+    u8 Gpio_Func_En;    // Is GPIO HW function enabled ?
+    u8 Locked;
+}HAL_GPIO_ADAPTER, *PHAL_GPIO_ADAPTER;
+
+u32 
+HAL_GPIO_GetPinName(
+    u32 chip_pin
+);
+
+VOID 
+HAL_GPIO_PullCtrl(
+    u32 pin,
+    u32 mode    
+);
+
+VOID 
+HAL_GPIO_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+VOID 
+HAL_GPIO_Irq_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+#endif  // end of "#define _HAL_GPIO_H_"
+

lib/fwlib/hal_i2c.h

@@ -0,0 +1,585 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_I2C_H_     //#ifndef _HAL_I2C_H_
+#define _HAL_I2C_H_
+
+#include "rtl8195a_i2c.h"
+#include "hal_gdma.h"
+
+//================= I2C CONFIGURATION START ==================
+// I2C SAL User Configuration Flags
+
+// I2C SAL operation types
+#define I2C_POLL_OP_TYPE            1
+#define I2C_INTR_OP_TYPE            1
+#define I2C_DMA_OP_TYPE             1
+
+// I2C supports user register address
+#define I2C_USER_REG_ADDR           1       //I2C User specific register address by using 
+                                            //the first I2C data as the register 
+                                            //address
+                                            
+// I2C SAL used module. Please set the I2C module flag to 1 to enable the related 
+// I2C module functions.
+#define I2C0_USED                   1
+#define I2C1_USED                   1
+#define I2C2_USED                   1
+#define I2C3_USED                   1
+//================= I2C CONFIGURATION END  ===================
+
+
+//================= I2C HAL START  ==========================
+// I2C debug output
+#define I2C_PREFIX      "RTL8195A[i2c]: "
+#define I2C_PREFIX_LVL  "    [i2c_DBG]: "
+
+typedef enum _I2C_DBG_LVL_ {
+    HAL_I2C_LVL         =   0x01,
+    SAL_I2C_LVL         =   0x02,
+    VERI_I2C_LVL        =   0x03,
+}I2C_DBG_LVL,*PI2C_DBG_LVL;
+
+#ifdef CONFIG_DEBUG_LOG
+#ifdef CONFIG_DEBUG_LOG_I2C_HAL
+#define DBG_I2C_LOG_PERD    100
+
+    #define I2CDBGLVL   0xFF
+    #define DBG_8195A_I2C(...)  do{ \
+                                    _DbgDump("\r"I2C_PREFIX __VA_ARGS__);\
+                                }while(0)
+   
+    #define DBG_8195A_I2C_LVL(LVL,...)  do{\
+                                            if (LVL&I2CDBGLVL){\
+                                                _DbgDump("\r"I2C_PREFIX_LVL __VA_ARGS__);\
+                                            }\
+                                        }while(0)
+#else
+    #define DBG_I2C_LOG_PERD    100
+    #define DBG_8195A_I2C(...)
+    #define DBG_8195A_I2C_LVL(...)
+#endif
+#else
+    #define DBG_I2C_LOG_PERD    100
+    #define DBG_8195A_I2C(...)
+    #define DBG_8195A_I2C_LVL(...)
+#endif
+
+//======================================================
+// I2C HAL related enumeration
+// I2C Module Selection 
+typedef enum _I2C_MODULE_SEL_ {
+        I2C0_SEL    =   0x0,
+        I2C1_SEL    =   0x1,
+        I2C2_SEL    =   0x2,
+        I2C3_SEL    =   0x3,
+}I2C_MODULE_SEL,*PI2C_MODULE_SEL;
+
+// I2C HAL initial data structure 
+typedef struct _HAL_I2C_INIT_DAT_ {
+    u8                  I2CIdx;         //I2C index used
+    u8                  I2CEn;          //I2C module enable
+    u8                  I2CMaster;      //Master or Slave mode
+    u8                  I2CAddrMod;     //I2C addressing mode(7-bit, 10-bit)
+
+    u8                  I2CSpdMod;      //I2C  speed mode(Standard, Fast, High)
+    u8                  I2CSetup;       //I2C SDA setup time
+    u8                  I2CRXTL;        //I2C RX FIFO Threshold
+    u8                  I2CTXTL;        //I2C TX FIFO Threshold
+
+    u8                  I2CBusLd;       //I2C bus load (pf) for high speed mode
+    u8                  I2CReSTR;       //I2C restart support
+    u8                  I2CGC;          //I2C general support
+    u8                  I2CStartB;      //I2C start byte support
+
+    u8                  I2CSlvNoAck;    //I2C slave no ack support
+    u8                  I2CDMACtrl;     //I2C DMA feature support
+    u8                  I2CCmd;         //I2C Command
+    u8                  I2CDataLen;     //I2C Data Length
+
+    u8                  I2CSlvAckGC;    //I2C slave acks to General Call
+    u8                  I2CStop;        //I2C issues STOP bit or not
+    u16                 RSVD0;
+    
+    u8                  *I2CRWData;     //I2C Read/Write data pointer
+
+    u16                 I2CIntrMSK;     //I2C Interrupt Mask
+    u16                 I2CIntrClr;     //I2C Interrupt register to clear 
+
+    u16                 I2CAckAddr;     //I2C target address in I2C Master mode,
+                                        //ack address in I2C Slave mode    
+    u16                 I2CSdaHd;       //I2C SDA hold time
+
+    u32                 I2CClk;         //I2C bus clock (in kHz)
+
+    u8                  I2CTxDMARqLv;   //I2C TX DMA Empty Level
+    u8                  I2CRxDMARqLv;   //I2C RX DMA Full Level
+    u16                 RSVD1;          //Reserved
+}HAL_I2C_INIT_DAT,*PHAL_I2C_INIT_DAT;
+
+// I2C HAL Operations
+typedef struct _HAL_I2C_OP_ {
+    HAL_Status  (*HalI2CInit)       (VOID *Data);   //HAL I2C initialization
+    HAL_Status  (*HalI2CDeInit)     (VOID *Data);   //HAL I2C de-initialization
+    HAL_Status  (*HalI2CSend)       (VOID *Data);   //HAL I2C send
+    u8          (*HalI2CReceive)    (VOID *Data);   //HAL I2C receive
+    HAL_Status  (*HalI2CEnable)     (VOID *Data);   //HAL I2C enable module
+    HAL_Status  (*HalI2CIntrCtrl)   (VOID *Data);   //HAL I2C interrupt control
+    u32         (*HalI2CReadReg)    (VOID *Data, u8 I2CReg);//HAL I2C read register
+    HAL_Status  (*HalI2CWriteReg)   (VOID *Data, u8 I2CReg, u32 RegVal);//HAL I2C write register
+    HAL_Status  (*HalI2CSetCLK)     (VOID *Data);   //HAL I2C set bus clock
+    HAL_Status  (*HalI2CMassSend)   (VOID *Data);   //HAL I2C mass send
+    HAL_Status  (*HalI2CClrIntr)    (VOID *Data);   //HAL I2C clear interrupts
+    HAL_Status  (*HalI2CClrAllIntr) (VOID *Data);   //HAL I2C clear all interrupts
+    HAL_Status  (*HalI2CDMACtrl)    (VOID *Data);   //HAL I2C DMA control
+}HAL_I2C_OP, *PHAL_I2C_OP;
+//================= I2C HAL END   ===========================
+
+
+//================= I2C SAL START  ==========================
+//I2C SAL Macros
+
+//======================================================
+// I2C SAL related enumerations
+// I2C Extend Features
+typedef enum _I2C_EXD_SUPPORT_{
+    I2C_EXD_RESTART     =   0x1,            //BIT_0, RESTART bit
+    I2C_EXD_GENCALL     =   0x2,            //BIT_1, Master generates General Call. All "send" operations generate General Call addresss
+    I2C_EXD_STARTB      =   0x4,            //BIT_2, Using START BYTE, instead of START Bit
+    I2C_EXD_SLVNOACK    =   0x8,            //BIT_3, Slave no ack to master
+    I2C_EXD_BUS400PF    =   0x10,           //BIT_4, I2C bus loading is 400pf
+    I2C_EXD_SLVACKGC    =   0x20,           //BIT_5, Slave acks to a General Call
+    I2C_EXD_USER_REG    =   0x40,           //BIT_6, Using User Register Address
+    I2C_EXD_USER_TWOB   =   0x80,           //BIT_7, User Register Address is 2-byte
+    I2C_EXD_MTR_ADDR_RTY=   0x100,          //BIT_8, Master retries to send start condition and Slave address when the slave doesn't ack 
+                                            //         the address.
+    I2C_EXD_MTR_ADDR_UPD=   0x200,         //BIT_9, Master dynamically updates slave address
+    I2C_EXD_MTR_HOLD_BUS=   0x400,         //BIT_10, Master doesn't generate STOP when the FIFO is empty. This would make Master hold
+                                            //         the bus.
+}I2C_EXD_SUPPORT,*PI2C_EXD_SUPPORT;
+
+// I2C operation type
+typedef enum _I2C_OP_TYPE_ {
+    I2C_POLL_TYPE   =   0x0,
+    I2C_DMA_TYPE    =   0x1,
+    I2C_INTR_TYPE   =   0x2,
+}I2C_OP_TYPE, *PI2C_OP_TYPE;
+
+// I2C pinmux selection 
+typedef enum _I2C_PINMUX_ {
+    I2C_PIN_S0      =   0x0,
+    I2C_PIN_S1      =   0x1,
+    I2C_PIN_S2      =   0x2,
+    I2C_PIN_S3      =   0x3,    //Only valid for I2C0 and I2C3
+}I2C_PINMUX, *PI2C_PINMUX;
+
+// I2C module status 
+typedef enum _I2C_MODULE_STATUS_ {
+    I2C_DISABLE     =   0x0,
+    I2C_ENABLE      =   0x1,
+}I2C_MODULE_STATUS, *PI2C_MODULE_STATUS;
+
+// I2C device status 
+typedef enum _I2C_Device_STATUS_ {
+    I2C_STS_UNINITIAL   =   0x00,
+    I2C_STS_INITIALIZED =   0x01,
+    I2C_STS_IDLE        =   0x02,
+    
+    I2C_STS_TX_READY    =   0x03,    
+    I2C_STS_TX_ING      =   0x04,
+    
+    I2C_STS_RX_READY    =   0x05,
+    I2C_STS_RX_ING      =   0x06,
+
+    I2C_STS_ERROR       =   0x10,
+    I2C_STS_TIMEOUT     =   0x11, 
+}I2C_Device_STATUS, *PI2C_Device_STATUS;
+
+// I2C feature status 
+typedef enum _I2C_FEATURE_STATUS_{
+    I2C_FEATURE_DISABLED    =   0,
+    I2C_FEATURE_ENABLED     =   1,
+}I2C_FEATURE_STATUS,*PI2C_FEATURE_STATUS;
+
+// I2C device mode
+typedef enum _I2C_DEV_MODE_ {
+    I2C_SLAVE_MODE  =   0x0,
+    I2C_MASTER_MODE =   0x1,
+}I2C_DEV_MODE, *PI2C_DEV_MODE;
+
+// I2C Bus Transmit/Receive
+typedef enum _I2C_DIRECTION_ {
+    I2C_ONLY_TX     =   0x1,
+    I2C_ONLY_RX     =   0x2,
+    I2C_TXRX        =   0x3,
+}I2C_DIRECTION, *PI2C_DIRECTION;
+
+//I2C DMA module number
+typedef enum _I2C_DMA_MODULE_SEL_ {
+    I2C_DMA_MODULE_0    =   0x0,
+    I2C_DMA_MODULE_1    =   0x1
+}I2C_DMA_MODULE_SEL, *PI2C_DMA_MODULE_SEL;
+
+// I2C0 DMA peripheral number
+typedef enum _I2C0_DMA_PERI_NUM_ {
+    I2C0_DMA_TX_NUM =   0x8,
+    I2C0_DMA_RX_NUM =   0x9,
+}I2C0_DMA_PERI_NUM,*PI2C0_DMA_PERI_NUM;
+
+// I2C1 DMA peripheral number
+typedef enum _I2C1_DMA_PERI_NUM_ {
+    I2C1_DMA_TX_NUM =   0xA,
+    I2C1_DMA_RX_NUM =   0xB,
+}I2C1_DMA_PERI_NUM,*PI2C1_DMA_PERI_NUM;
+
+// I2C0 DMA module used
+typedef enum _I2C0_DMA_MODULE_ {
+    I2C0_DMA0   =   0x0,
+    I2C0_DMA1   =   0x1,
+}I2C0_DMA_MODULE,*PI2C0_DMA_MODULE;
+
+// I2C0 DMA module used
+typedef enum _I2C1_DMA_MODULE_ {
+    I2C1_DMA0   =   0x0,
+    I2C1_DMA1   =   0x1,
+}I2C1_DMA_MODULE,*PI2C1_DMA_MODULE;
+
+// I2C command type 
+typedef enum _I2C_COMMAND_TYPE_ {
+    I2C_WRITE_CMD   =   0x0,
+    I2C_READ_CMD    =   0x1,
+}I2C_COMMAND_TYPE,*PI2C_COMMAND_TYPE;
+
+// I2C STOP BIT 
+typedef enum _I2C_STOP_TYPE_ {
+    I2C_STOP_DIS    =   0x0,
+    I2C_STOP_EN     =   0x1,
+}I2C_STOP_TYPE, *PI2C_STOP_TYPE;
+
+// I2C error type 
+typedef enum _I2C_ERR_TYPE_ {
+    I2C_ERR_RX_UNDER    =   0x01,           //I2C RX FIFO Underflow
+    I2C_ERR_RX_OVER     =   0x02,           //I2C RX FIFO Overflow
+    I2C_ERR_TX_OVER     =   0x04,           //I2C TX FIFO Overflow
+    I2C_ERR_TX_ABRT     =   0x08,           //I2C TX terminated
+    I2C_ERR_SLV_TX_NACK =   0x10,           //I2C slave transmission terminated by master NACK, 
+                                            //but there are data in slave TX FIFO
+    I2C_ERR_USER_REG_TO =   0x20,
+
+    I2C_ERR_RX_CMD_TO   =   0x21,
+    I2C_ERR_RX_FF_TO    =   0x22,
+    I2C_ERR_TX_CMD_TO   =   0x23,
+    I2C_ERR_TX_FF_TO    =   0x24,
+
+    I2C_ERR_TX_ADD_TO   =   0x25,
+    I2C_ERR_RX_ADD_TO   =   0x26,
+}I2C_ERR_TYPE, *PI2C_ERR_TYPE;
+
+// I2C Time Out type
+typedef enum _I2C_TIMEOUT_TYPE_ {
+    I2C_TIMEOOUT_DISABLE    =   0x00,           
+    I2C_TIMEOOUT_ENDLESS    =   0xFFFFFFFF,
+}I2C_TIMEOUT_TYPE, *PI2C_TIMEOUT_TYPE;
+
+//======================================================
+// SAL I2C related data structures
+// I2C user callback adapter
+typedef struct _SAL_I2C_USERCB_ADPT_ {
+    VOID (*USERCB)      (VOID *Data);
+    u32  USERData;
+}SAL_I2C_USERCB_ADPT, *PSAL_I2C_USERCB_ADPT;
+
+// I2C user callback structure
+typedef struct _SAL_I2C_USER_CB_ {
+    PSAL_I2C_USERCB_ADPT    pTXCB;          //I2C Transmit Callback
+    PSAL_I2C_USERCB_ADPT    pTXCCB;         //I2C Transmit Complete Callback
+    PSAL_I2C_USERCB_ADPT    pRXCB;          //I2C Receive Callback
+    PSAL_I2C_USERCB_ADPT    pRXCCB;         //I2C Receive Complete Callback
+    PSAL_I2C_USERCB_ADPT    pRDREQCB;       //I2C Read Request Callback
+    PSAL_I2C_USERCB_ADPT    pERRCB;         //I2C Error Callback
+    PSAL_I2C_USERCB_ADPT    pDMATXCB;       //I2C DMA Transmit Callback
+    PSAL_I2C_USERCB_ADPT    pDMATXCCB;      //I2C DMA Transmit Complete Callback
+    PSAL_I2C_USERCB_ADPT    pDMARXCB;       //I2C DMA Receive Callback
+    PSAL_I2C_USERCB_ADPT    pDMARXCCB;      //I2C DMA Receive Complete Callback
+    PSAL_I2C_USERCB_ADPT    pGENCALLCB;     //I2C General Call Callback
+}SAL_I2C_USER_CB, *PSAL_I2C_USER_CB;
+
+// I2C Transmit Buffer
+typedef struct _SAL_I2C_TRANSFER_BUF_ {
+    u16     DataLen;                        //I2C Transmfer Length
+    u16     TargetAddr;                     //I2C Target Address. It's only valid in Master Mode.
+    u32     RegAddr;                        //I2C Register Address. It's only valid in Master Mode.
+    u32     RSVD;                           //
+    u8      *pDataBuf;                      //I2C Transfer Buffer Pointer
+}SAL_I2C_TRANSFER_BUF,*PSAL_I2C_TRANSFER_BUF;
+
+typedef struct _SAL_I2C_DMA_USER_DEF_ {
+    u8      TxDatSrcWdth;
+    u8      TxDatDstWdth;
+    u8      TxDatSrcBstSz;
+    u8      TxDatDstBstSz;
+    u8      TxChNo;
+    u8      RSVD0;
+    u16     RSVD1;
+    u8      RxDatSrcWdth;
+    u8      RxDatDstWdth;
+    u8      RxDatSrcBstSz;
+    u8      RxDatDstBstSz;
+    u8      RxChNo;
+    u8      RSVD2;
+    u16     RSVD3;
+}SAL_I2C_DMA_USER_DEF, *PSAL_I2C_DMA_USER_DEF;
+
+// RTK I2C OP
+typedef struct _RTK_I2C_OP_ {
+    HAL_Status (*Init)      (VOID *Data);
+    HAL_Status (*DeInit)    (VOID *Data);
+    HAL_Status (*Send)      (VOID *Data);
+    HAL_Status (*Receive)   (VOID *Data);
+    HAL_Status (*IoCtrl)    (VOID *Data);
+    HAL_Status (*PowerCtrl) (VOID *Data);    
+}RTK_I2C_OP, *PRTK_I2C_OP;
+
+// Software API Level I2C Handler 
+typedef struct _SAL_I2C_HND_ {
+    u8                      DevNum;             //I2C device number
+    u8                      PinMux;             //I2C pin mux seletion
+    u8                      OpType;             //I2C operation type selection
+    volatile u8             DevSts;             //I2C device status
+    
+    u8                      I2CMaster;          //I2C Master or Slave mode
+    u8                      I2CAddrMod;         //I2C 7-bit or 10-bit mode
+    u8                      I2CSpdMod;          //I2C SS/ FS/ HS speed mode
+    u8                      I2CAckAddr;         //I2C target address in Master 
+                                                //mode or ack address in Slave
+                                                //mode
+                                                
+    u16                     I2CClk;             //I2C bus clock
+    u8                      MasterRead;         //I2C Master Read Supported,
+                                                //An Address will be sent before
+                                                //read data back.
+                                                
+    u8                      I2CDmaSel;          //I2C DMA module select
+                                                //         0 for DMA0,
+                                                //         1 for DMA1
+    u8                      I2CTxDMARqLv;       //I2C TX DMA Empty Level
+    u8                      I2CRxDMARqLv;       //I2C RX DMA Full Level
+    u16                     RSVD0;              //Reserved
+
+    u32                     AddRtyTimeOut;      //I2C TimeOut Value for master send address retry
+                                                //(Originally Reserved.)
+    
+    u32                     I2CExd;             //I2C extended options:
+                                                //bit 0: I2C RESTART supported,
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 1: I2C General Call supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 2: I2C START Byte supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 3: I2C Slave-No-Ack
+                                                //         supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 4: I2C bus loading,
+                                                //          0 for 100pf, 
+                                                //          1  for 400pf
+                                                //bit 5: I2C slave ack to General
+                                                //         Call
+                                                //bit 6: I2C User register address
+                                                //bit 7: I2C 2-Byte User register
+                                                //         address
+                                                //bit 8: I2C slave address no ack retry,
+                                                //        It's only for Master mode,
+                                                //        when slave doesn't ack the
+                                                //        address
+                                                //bit 31~bit 8: Reserved
+    u32                     ErrType;            //
+    u32                     TimeOut;            //I2C IO Timeout count,  in ms
+                                                                            
+    PHAL_I2C_INIT_DAT       pInitDat;           //Pointer to I2C initial data struct
+    PSAL_I2C_TRANSFER_BUF   pTXBuf;             //Pointer to I2C TX buffer
+    PSAL_I2C_TRANSFER_BUF   pRXBuf;             //Pointer to I2C RX buffer
+    PSAL_I2C_USER_CB        pUserCB;            //Pointer to I2C User Callback
+    PSAL_I2C_DMA_USER_DEF   pDMAConf;           //Pointer to I2C User Define DMA config
+}SAL_I2C_HND, *PSAL_I2C_HND;
+
+
+
+//======================================================
+// I2C SAL Function Prototypes
+
+// For checking I2C input index valid or not
+static inline HAL_Status
+RtkI2CIdxChk(
+    IN  u8  I2CIdx
+)
+{
+    if (I2CIdx > I2C3_SEL)
+        return HAL_ERR_UNKNOWN;
+        
+    return HAL_OK;
+}
+#if 0
+//For checking I2C operation type valid or not
+static inline HAL_Status
+RtkI2COpTypeChk(
+    IN  VOID *Data
+)
+{
+    PSAL_I2C_HND    pSalI2CHND = (PSAL_I2C_HND) Data;
+
+    if (pSalI2CHND->OpType == I2C_POLL_TYPE)
+        return HAL_ERR_UNKNOWN;
+
+    if (pSalI2CHND->OpType == I2C_DMA_TYPE)
+        return HAL_ERR_UNKNOWN;
+
+    if (pSalI2CHND->OpType == I2C_INTR_TYPE)
+        return HAL_ERR_UNKNOWN;
+
+    pSalI2CHND = pSalI2CHND;
+    
+    return HAL_OK;
+}
+#endif
+//For checking I2C DMA available or not
+static inline HAL_Status
+RtkI2CDMAChk(
+    IN  VOID *Data
+)
+{
+    PSAL_I2C_HND    pSalI2CHND = (PSAL_I2C_HND) Data;
+
+    if (pSalI2CHND->OpType == I2C_DMA_TYPE) {
+        if (pSalI2CHND->DevNum >= I2C2_SEL)
+            return HAL_ERR_UNKNOWN;
+    }
+    else {
+        return HAL_ERR_UNKNOWN;
+    }
+
+    return HAL_OK;
+}
+
+//For checking I2C DMA available or not
+static inline HAL_Status
+RtkI2CDMAInitChk(
+    IN  VOID *Data
+)
+{
+    PSAL_I2C_HND    pSalI2CHND = (PSAL_I2C_HND) Data;
+
+    if (pSalI2CHND->OpType != I2C_DMA_TYPE) {
+        return HAL_ERR_UNKNOWN;
+    }
+    else {
+        return HAL_OK;
+    }
+    
+}
+
+//======================================================
+//SAL I2C management function prototype
+_LONG_CALL_ROM_ HAL_Status RtkI2CLoadDefault(IN VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CInit(IN  VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CDeInit(IN  VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CSend(IN  VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CReceive(IN  VOID *Data);
+_LONG_CALL_ROM_ VOID RtkSalI2COpInit(IN  VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CSendUserAddr(IN  VOID *Data,IN  u8  MtrWr);
+_LONG_CALL_ROM_ HAL_Status RtkI2CIoCtrl(IN  VOID *Data);
+_LONG_CALL_ROM_ HAL_Status RtkI2CPowerCtrl(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CInitForPS(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CDeInitForPS(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CDisablePS(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CEnablePS(IN  VOID *Data);
+//================= I2C SAL END   ===========================
+
+
+//================= I2C SAL MANAGEMENT START  =================
+// I2C SAL management macros
+#define SAL_USER_CB_NUM     (sizeof(SAL_I2C_USER_CB) / sizeof(PSAL_I2C_USERCB_ADPT))
+
+//======================================================
+// I2C SAL management data structures
+// I2C SAL handle private 
+typedef struct _SAL_I2C_HND_PRIV_ {
+    VOID            **ppSalI2CHnd;              //Pointer to SAL_I2C_HND pointer
+    SAL_I2C_HND     SalI2CHndPriv;              //Private SAL_I2C_HND
+}SAL_I2C_HND_PRIV, *PSAL_I2C_HND_PRIV;
+
+//I2C SAL management adapter
+typedef struct _SAL_I2C_MNGT_ADPT_ {
+    PSAL_I2C_HND_PRIV       pSalHndPriv;                //Pointer to SAL_I2C_HND
+    PHAL_I2C_INIT_DAT       pHalInitDat;                //Pointer to HAL I2C initial data( HAL_I2C_INIT_DAT )
+    PHAL_I2C_OP             pHalOp;                     //Pointer to HAL I2C operation( HAL_I2C_OP )
+    VOID                    (*pHalOpInit)(VOID*);       //Pointer to HAL I2C initialize function
+    PIRQ_HANDLE             pIrqHnd;                    //Pointer to IRQ handler in SAL layer( IRQ_HANDLE )
+    PSAL_I2C_USER_CB        pUserCB;                    //Pointer to SAL user callbacks (SAL_I2C_USER_CB )
+    volatile u32            MstRDCmdCnt;                //Used for Master Read command count
+    volatile u32            InnerTimeOut;               //Used for SAL internal timeout count
+    VOID                    (*pSalIrqFunc)(VOID*);      //Used for SAL I2C interrupt function
+    
+    PSAL_I2C_DMA_USER_DEF   pDMAConf;                   //Pointer to I2C User Define DMA config
+    PHAL_GDMA_ADAPTER       pHalTxGdmaAdp;              //Pointer to HAL_GDMA_ADAPTER
+    PHAL_GDMA_ADAPTER       pHalRxGdmaAdp;              //Pointer to HAL_GDMA_ADAPTER
+    PHAL_GDMA_OP            pHalGdmaOp;                 //Pointer to HAL_GDMA_OP
+    VOID                    (*pHalGdmaOpInit)(VOID*);   //Pointer to HAL I2C initialize function
+    PIRQ_HANDLE             pIrqTxGdmaHnd;              //Pointer to IRQ handler for Tx GDMA
+    PIRQ_HANDLE             pIrqRxGdmaHnd;              //Pointer to IRQ handler for Rx GDMA
+    VOID                    (*pSalDMATxIrqFunc)(VOID*); //Used for SAL I2C interrupt function
+    VOID                    (*pSalDMARxIrqFunc)(VOID*); //Used for SAL I2C interrupt function
+    u32                     RSVD;                       //Reserved
+}SAL_I2C_MNGT_ADPT, *PSAL_I2C_MNGT_ADPT;
+
+//======================================================
+//SAL I2C management function prototype
+PSAL_I2C_MNGT_ADPT RtkI2CGetMngtAdpt(IN u8 I2CIdx);
+HAL_Status RtkI2CFreeMngtAdpt(IN  PSAL_I2C_MNGT_ADPT  pSalI2CMngtAdpt);
+PSAL_I2C_HND RtkI2CGetSalHnd(IN  u8  I2CIdx);
+HAL_Status RtkI2CFreeSalHnd(IN  PSAL_I2C_HND    pSalI2CHND);
+u32 RtkSalI2CSts(IN  VOID *Data);
+
+extern _LONG_CALL_ VOID I2CISRHandle(IN  VOID *Data);
+extern _LONG_CALL_ VOID I2CTXGDMAISRHandle(IN  VOID *Data);
+extern _LONG_CALL_ VOID I2CRXGDMAISRHandle(IN  VOID *Data);
+extern HAL_Status I2CIsTimeout (IN  u32 StartCount, IN  u32 TimeoutCnt);
+extern HAL_TIMER_OP        HalTimerOp;
+//======================================================
+// Function Prototypes
+_LONG_CALL_ VOID HalI2COpInit(IN VOID *Data);
+//================= I2C SAL MANAGEMENT END   ==================
+
+//================= Rtl8195a I2C V02 function prototype  ============
+_LONG_CALL_ VOID HalI2COpInitV02(IN  VOID *Data);
+_LONG_CALL_ VOID I2CISRHandleV02(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CSendV02(IN  VOID *Data);
+_LONG_CALL_ HAL_Status RtkI2CReceiveV02(IN  VOID *Data);
+_LONG_CALL_ VOID RtkSalI2COpInitV02(IN  VOID *Data);
+//================= Rtl8195a I2C V02 function prototype  END==========
+
+//======================================================
+//SAL I2C patch function prototype
+HAL_Status RtkI2CSend_Patch(IN  VOID *Data);
+HAL_Status RtkI2CReceive_Patch(IN  VOID *Data);
+VOID HalI2COpInit_Patch(IN VOID *Data);
+VOID I2CISRHandle_Patch(IN  VOID *Data);
+
+#ifndef CONFIG_RELEASE_BUILD_LIBRARIES
+#define RtkI2CSend RtkI2CSend_Patch
+#define RtkI2CReceive RtkI2CReceive_Patch
+#endif
+HAL_Status RtkI2CSend_Patch(IN  VOID *Data);
+HAL_Status RtkI2CReceive_Patch(IN  VOID *Data);
+//================= I2C SAL END   ===========================
+
+#endif                  //#ifndef _HAL_I2C_H_

lib/fwlib/hal_i2s.h

@@ -0,0 +1,347 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_I2S_H_
+#define _HAL_I2S_H_
+
+#include "rtl8195a_i2s.h"
+
+/* User Define Flags */
+
+#define I2S_MAX_ID                  1   // valid I2S index 0 ~ I2S_MAX_ID
+
+/**********************************************************************/
+/* I2S HAL initial data structure */
+typedef struct _HAL_I2S_INIT_DAT_ {
+    u8                  I2SIdx;         /*I2S index used*/
+    u8                  I2SEn;          /*I2S module enable tx/rx/tx+rx*/
+    u8                  I2SMaster;      /*I2S Master or Slave mode*/
+    u8                  I2SWordLen;     /*I2S Word length 16 or 24bits*/
+
+    u8                  I2SChNum;       /*I2S Channel number mono or stereo*/
+    u8                  I2SPageNum;     /*I2S Page Number 2~4*/
+    u16                 I2SPageSize;    /*I2S page Size 1~4096 word*/
+
+    u8                  *I2STxData;     /*I2S Tx data pointer*/
+
+    u8                  *I2SRxData;     /*I2S Rx data pointer*/
+
+    u32                 I2STxIntrMSK;   /*I2S Tx Interrupt Mask*/
+    u32                 I2STxIntrClr;   /*I2S Tx Interrupt register to clear */
+
+    u32                 I2SRxIntrMSK;   /*I2S Rx Interrupt Mask*/
+    u32                 I2SRxIntrClr;   /*I2S Rx Interrupt register to clear*/
+
+	u16                 I2STxIdx;       /*I2S TX page index */
+	u16                 I2SRxIdx;       /*I2S RX page index */
+
+	u16                 I2SHWTxIdx;       /*I2S HW TX page index */
+	u16                 I2SHWRxIdx;       /*I2S HW RX page index */
+
+	
+    u16                 I2SRate;        /*I2S sample rate*/
+    u8                  I2STRxAct;      /*I2S tx rx act*/	
+}HAL_I2S_INIT_DAT, *PHAL_I2S_INIT_DAT;
+
+/**********************************************************************/
+/* I2S Data Structures */
+/* I2S Module Selection */
+typedef enum _I2S_MODULE_SEL_ {
+        I2S0_SEL    =   0x0,
+        I2S1_SEL    =   0x1,
+}I2S_MODULE_SEL,*PI2S_MODULE_SEL;
+/*
+typedef struct _HAL_I2S_ADAPTER_ {
+    u32                       Enable:1;
+    I2S_CTL_REG               I2sCtl;
+    I2S_SETTING_REG           I2sSetting;
+    u32                       abc;
+    u8                        I2sIndex;
+}HAL_I2S_ADAPTER, *PHAL_I2S_ADAPTER;
+*/
+/* I2S HAL Operations */
+typedef struct _HAL_I2S_OP_ {
+    RTK_STATUS  (*HalI2SInit)       (VOID *Data);
+    RTK_STATUS  (*HalI2SDeInit)     (VOID *Data);
+    RTK_STATUS  (*HalI2STx)       (VOID *Data, u8 *pBuff);
+    RTK_STATUS  (*HalI2SRx)       (VOID *Data, u8 *pBuff);
+    RTK_STATUS  (*HalI2SEnable)     (VOID *Data);
+    RTK_STATUS  (*HalI2SIntrCtrl)   (VOID *Data);
+    u32         (*HalI2SReadReg)    (VOID *Data, u8 I2SReg);
+    RTK_STATUS  (*HalI2SSetRate)    (VOID *Data);
+    RTK_STATUS  (*HalI2SSetWordLen) (VOID *Data);
+    RTK_STATUS  (*HalI2SSetChNum)   (VOID *Data);
+    RTK_STATUS  (*HalI2SSetPageNum) (VOID *Data);
+    RTK_STATUS  (*HalI2SSetPageSize) (VOID *Data);
+
+    RTK_STATUS  (*HalI2SClrIntr)    (VOID *Data);
+    RTK_STATUS  (*HalI2SClrAllIntr) (VOID *Data);
+    RTK_STATUS  (*HalI2SDMACtrl)    (VOID *Data); 
+/*
+    VOID (*HalI2sOnOff)(VOID *Data);
+    BOOL (*HalI2sInit)(VOID *Data);
+    BOOL (*HalI2sSetting)(VOID *Data);
+    BOOL (*HalI2sEn)(VOID *Data);
+    BOOL (*HalI2sIsrEnAndDis) (VOID *Data);
+    BOOL (*HalI2sDumpReg)(VOID *Data);
+    BOOL (*HalI2s)(VOID *Data);
+*/
+}HAL_I2S_OP, *PHAL_I2S_OP;
+
+
+/**********************************************************************/
+
+/* I2S Pinmux Selection */
+#if 0
+typedef enum _I2S0_PINMUX_ {
+    I2S0_TO_S0      =   0x0,
+    I2S0_TO_S1      =   0x1,
+    I2S0_TO_S2      =   0x2,
+}I2S0_PINMUX, *PI2S0_PINMUX;
+
+typedef enum _I2S1_PINMUX_ {
+    I2S1_TO_S0      =   0x0,
+    I2S1_TO_S1      =   0x1,
+}I2S1_PINMUX, *PI2S1_PINMUX;
+#endif
+
+typedef enum _I2S_PINMUX_ {
+    I2S_S0      =   0,
+    I2S_S1      =   1,
+    I2S_S2      =   2,
+    I2S_S3      =   3
+}I2S_PINMUX, *PI2S_PINMUX;
+
+
+/* I2S Module Status */
+typedef enum _I2S_MODULE_STATUS_ {
+    I2S_DISABLE     =   0x0,
+    I2S_ENABLE      =   0x1,
+}I2S_MODULE_STATUS, *PI2S_MODULE_STATUS;
+
+
+/* I2S Device Status */
+typedef enum _I2S_Device_STATUS_ {
+    I2S_STS_UNINITIAL   =   0x00,
+    I2S_STS_INITIALIZED =   0x01,
+    I2S_STS_IDLE        =   0x02,
+    
+    I2S_STS_TX_READY    =   0x03,    
+    I2S_STS_TX_ING      =   0x04,
+    
+    I2S_STS_RX_READY    =   0x05,
+    I2S_STS_RX_ING      =   0x06,
+
+    I2S_STS_TRX_READY   =   0x07,    
+    I2S_STS_TRX_ING     =   0x08,
+    
+    I2S_STS_ERROR       =   0x09,
+}I2S_Device_STATUS, *PI2S_Device_STATUS;
+
+
+/* I2S Feature Status */
+typedef enum _I2S_FEATURE_STATUS_{
+    I2S_FEATURE_DISABLED    =   0,
+    I2S_FEATURE_ENABLED     =   1,
+}I2S_FEATURE_STATUS,*PI2S_FEATURE_STATUS;
+
+/* I2S Device Mode */
+typedef enum _I2S_DEV_MODE_ {
+	I2S_MASTER_MODE =   0x0,
+    I2S_SLAVE_MODE  =   0x1
+}I2S_DEV_MODE, *PI2S_DEV_MODE;
+
+/* I2S Word Length */
+typedef enum _I2S_WORD_LEN_ {
+	I2S_WL_16 = 0x0,
+    I2S_WL_24 = 0x1,    
+}I2S_WORD_LEN, *PI2S_WORD_LEN;
+
+/* I2S Bus Transmit/Receive */
+typedef enum _I2S_DIRECTION_ {
+    I2S_ONLY_RX     =   0x0,
+    I2S_ONLY_TX     =   0x1,
+    I2S_TXRX        =   0x2
+}I2S_DIRECTION, *PI2S_DIRECTION;
+
+/* I2S Channel number */
+typedef enum _I2S_CH_NUM_ {
+    I2S_CH_STEREO   =   0x0,
+    I2S_CH_RSVD     =   0x1,
+    I2S_CH_MONO     =   0x2
+}I2S_CH_NUM, *PI2S_CH_NUM;
+
+/* I2S Page number */
+typedef enum _I2S_PAGE_NUM_ {
+    I2S_1PAGE       =   0x0,
+    I2S_2PAGE       =   0x1,
+    I2S_3PAGE       =   0x2,
+    I2S_4PAGE       =   0x3
+}I2S_PAGE_NUM, *PI2S_PAGE_NUM;
+
+/* I2S Sample rate*/
+typedef enum _I2S_SAMPLE_RATE_ {
+    I2S_SR_8KHZ     =   0x00,	// /12
+    I2S_SR_16KHZ    =   0x01,	// /6
+    I2S_SR_24KHZ    =   0x02,	// /4
+	I2S_SR_32KHZ	= 	0x03,	// /3
+    I2S_SR_48KHZ    =   0x05,	// /2
+	I2S_SR_96KHZ	=	0x06,	// x1, base 96kHz
+	I2S_SR_7p35KHZ	= 	0x10,
+	I2S_SR_11p02KHZ	= 	0x11,
+	I2S_SR_22p05KHZ	= 	0x12,
+	I2S_SR_29p4KHZ	= 	0x13,
+	I2S_SR_44p1KHZ	= 	0x15,	
+	I2S_SR_88p2KHZ	= 	0x16	// x1, base 88200Hz
+}I2S_SAMPLE_RATE, *PI2S_SAMPLE_RATE;
+
+/* I2S TX interrupt mask/status */
+typedef enum _I2S_TX_IMR_ {
+    I2S_TX_INT_PAGE0_OK = (1<<0),
+    I2S_TX_INT_PAGE1_OK = (1<<1),
+    I2S_TX_INT_PAGE2_OK = (1<<2),
+    I2S_TX_INT_PAGE3_OK = (1<<3),
+    I2S_TX_INT_FULL     = (1<<4),
+    I2S_TX_INT_EMPTY    = (1<<5)    
+} I2S_TX_IMR, *PI2S_TX_IMR;
+
+/* I2S RX interrupt mask/status */
+typedef enum _I2S_RX_IMR_ {
+    I2S_RX_INT_PAGE0_OK = (1<<0),
+    I2S_RX_INT_PAGE1_OK = (1<<1),
+    I2S_RX_INT_PAGE2_OK = (1<<2),
+    I2S_RX_INT_PAGE3_OK = (1<<3),
+    I2S_RX_INT_EMPTY    = (1<<4),
+    I2S_RX_INT_FULL     = (1<<5)    
+} I2S_RX_IMR, *PI2S_RX_IMR;
+
+/* I2S User Callbacks */
+typedef struct _SAL_I2S_USER_CB_{
+    VOID (*TXCB)        (VOID *Data);
+    VOID (*TXCCB)       (VOID *Data);
+    VOID (*RXCB)        (VOID *Data);
+    VOID (*RXCCB)       (VOID *Data);
+    VOID (*RDREQCB)     (VOID *Data);
+    VOID (*ERRCB)       (VOID *Data);
+    VOID (*GENCALLCB)   (VOID *Data);
+}SAL_I2S_USER_CB,*PSAL_I2S_USER_CB;
+
+typedef struct _I2S_USER_CB_{
+    VOID (*TxCCB)(uint32_t id, char *pbuf);
+    u32 TxCBId;
+    VOID (*RxCCB)(uint32_t id, char *pbuf);
+    u32 RxCBId;
+}I2S_USER_CB,*PI2S_USER_CB;
+
+/* Software API Level I2S Handler */
+typedef struct _HAL_I2S_ADAPTER_{
+    u8                      DevNum;             //I2S device number
+    u8                      PinMux;             //I2S pin mux seletion
+    u8                      RSVD0;              //Reserved
+    volatile u8             DevSts;             //I2S device status
+    
+    u32                     RSVD2;              //Reserved
+    u32                     I2SExd;             //I2S extended options:
+                                                //bit 0: I2C RESTART supported,
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 1: I2C General Call supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 2: I2C START Byte supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 3: I2C Slave-No-Ack
+                                                //         supported
+                                                //          0 for NOT supported,
+                                                //          1 for supported
+                                                //bit 4: I2C bus loading,
+                                                //          0 for 100pf, 
+                                                //          1  for 400pf
+                                                //bit 5: I2C slave ack to General
+                                                //         Call
+                                                //bit 6: I2C User register address
+                                                //bit 7: I2C 2-Byte User register
+                                                //         address
+                                                //bit 31~bit 8: Reserved
+    u32                     ErrType;         //
+    u32                     TimeOut;            //I2S IO Timeout count
+                                                                            
+    PHAL_I2S_INIT_DAT       pInitDat;           //Pointer to I2S initial data struct
+    I2S_USER_CB             UserCB;            //Pointer to I2S User Callback
+    IRQ_HANDLE              IrqHandle;          // Irq Handler
+
+    u32* TxPageList[4];       // The Tx DAM buffer: pointer of each page
+    u32* RxPageList[4];       // The Tx DAM buffer: pointer of each page
+}HAL_I2S_ADAPTER, *PHAL_I2S_ADAPTER;
+
+typedef struct _HAL_I2S_DEF_SETTING_{
+    u8 I2SMaster;           // Master or Slave mode
+    u8 DevSts;             //I2S device status
+    u8 I2SChNum;           //I2S Channel number mono or stereo
+    u8 I2SPageNum;         //I2S Page number 2~4
+    u8  I2STRxAct;          //I2S tx rx act, tx only or rx only or tx+rx
+    u8  I2SWordLen;         //I2S Word length 16bit or 24bit
+    u16 I2SPageSize;        //I2S Page size 1~4096 word
+                                                
+    u16 I2SRate;            //I2S sample rate 8k ~ 96khz
+    
+    u32 I2STxIntrMSK;   /*I2S Tx Interrupt Mask*/
+    u32 I2SRxIntrMSK;   /*I2S Rx Interrupt Mask*/
+}HAL_I2S_DEF_SETTING, *PHAL_I2S_DEF_SETTING;
+
+
+
+/**********************************************************************/
+HAL_Status
+RtkI2SLoadDefault(IN  VOID *Adapter, IN  VOID *Setting);
+
+HAL_Status
+RtkI2SInit(IN  VOID *Data);
+
+HAL_Status
+RtkI2SDeInit(IN  VOID *Data);
+
+HAL_Status
+RtkI2SEnable(IN  VOID *Data);
+
+HAL_Status
+RtkI2SDisable(IN  VOID *Data);
+
+extern HAL_Status 
+HalI2SInit( IN VOID *Data);
+
+extern VOID 
+HalI2SDeInit( IN VOID *Data);
+
+extern HAL_Status 
+HalI2SDisable( IN VOID *Data);
+
+extern HAL_Status 
+HalI2SEnable( IN VOID *Data);
+
+
+
+
+/**********************************************************************/
+
+
+VOID I2S0ISRHandle(VOID *Data);
+VOID I2S1ISRHandle(VOID *Data);
+
+
+/**********************************************************************/
+
+VOID HalI2SOpInit(
+    IN  VOID *Data
+);
+
+
+#endif
+

lib/fwlib/hal_irqn.h

@@ -0,0 +1,112 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_IRQN_H_
+#define _HAL_IRQN_H_
+
+#define PERIPHERAL_IRQ_BASE_NUM     64
+
+typedef enum _IRQn_Type_ {
+#if 0
+/******  Cortex-M3 Processor Exceptions Numbers ********/  
+    NON_MASKABLE_INT_IRQ            = -14,
+    HARD_FAULT_IRQ                  = -13,
+    MEM_MANAGE_FAULT_IRQ            = -12,
+    BUS_FAULT_IRQ                   = -11,
+    USAGE_FAULT_IRQ                 = -10,
+    SVCALL_IRQ                      = -5,
+    DEBUG_MONITOR_IRQ               = -4,
+    PENDSVC_IRQ                     = -2,
+    SYSTICK_IRQ                     = -1,
+#else    
+/******  Cortex-M3 Processor Exceptions Numbers ********/  
+    NonMaskableInt_IRQn             = -14,      /*!< 2 Non Maskable Interrupt                         */
+    HardFault_IRQn                  = -13,              /*!<   3  Hard Fault, all classes of Fault                                 */
+    MemoryManagement_IRQn           = -12,      /*!< 4 Cortex-M3 Memory Management Interrupt          */
+    BusFault_IRQn                   = -11,      /*!< 5 Cortex-M3 Bus Fault Interrupt                  */
+    UsageFault_IRQn                 = -10,      /*!< 6 Cortex-M3 Usage Fault Interrupt                */
+    SVCall_IRQn                     = -5,       /*!< 11 Cortex-M3 SV Call Interrupt                   */
+    DebugMonitor_IRQn               = -4,       /*!< 12 Cortex-M3 Debug Monitor Interrupt             */
+    PendSV_IRQn                     = -2,       /*!< 14 Cortex-M3 Pend SV Interrupt                   */
+    SysTick_IRQn                    = -1,       /*!< 15 Cortex-M3 System Tick Interrupt               */
+#endif
+/******  RTL8195A Specific Interrupt Numbers ************/
+    SYSTEM_ON_IRQ                   =  0,
+    WDG_IRQ                         =  1,
+    TIMER0_IRQ                      =  2,
+    TIMER1_IRQ                      =  3,
+    I2C3_IRQ                        =  4,
+    TIMER2_7_IRQ                    =  5,
+    SPI0_IRQ                        =  6,
+    GPIO_IRQ                        =  7,
+    UART0_IRQ                       =  8,
+    SPI_FLASH_IRQ                   =  9,
+    USB_OTG_IRQ                     =  10,
+    SDIO_HOST_IRQ                   =  11,
+    SDIO_DEVICE_IRQ                 =  12,
+    I2S0_PCM0_IRQ                   =  13,
+    I2S1_PCM1_IRQ                   =  14,
+    WL_DMA_IRQ                      =  15,
+    WL_PROTOCOL_IRQ                 =  16,
+    CRYPTO_IRQ                      =  17,
+    GMAC_IRQ						=  18,
+    PERIPHERAL_IRQ                  =  19,
+    GDMA0_CHANNEL0_IRQ              =  20,
+    GDMA0_CHANNEL1_IRQ              =  21,
+    GDMA0_CHANNEL2_IRQ              =  22,
+    GDMA0_CHANNEL3_IRQ              =  23,
+    GDMA0_CHANNEL4_IRQ              =  24,
+    GDMA0_CHANNEL5_IRQ              =  25,
+    GDMA1_CHANNEL0_IRQ              =  26,
+    GDMA1_CHANNEL1_IRQ              =  27,
+    GDMA1_CHANNEL2_IRQ              =  28,
+    GDMA1_CHANNEL3_IRQ              =  29,
+    GDMA1_CHANNEL4_IRQ              =  30,
+    GDMA1_CHANNEL5_IRQ              =  31,
+
+/******  RTL8195A Peripheral Interrupt Numbers ************/
+    I2C0_IRQ                        =  64,// 0 + 64,
+    I2C1_IRQ                        =  65,// 1 + 64,
+    I2C2_IRQ                        =  66,// 2 + 64,
+    SPI1_IRQ                        =  72,// 8 + 64,
+    SPI2_IRQ                        =  73,// 9 + 64,
+    UART1_IRQ                       =  80,// 16 + 64,
+    UART2_IRQ                       =  81,// 17 + 64,
+    UART_LOG_IRQ                    =  88,// 24 + 64,
+    ADC_IRQ                         =  89,// 25 + 64,
+    DAC0_IRQ                        =  91,// 27 + 64,
+    DAC1_IRQ                        =  92,// 28 + 64,
+    //RXI300_IRQ                      =  93// 29 + 64
+    LP_EXTENSION_IRQ                =  93,// 29+64
+    
+    PTA_TRX_IRQ                     =  95,// 31+64
+    RXI300_IRQ                      =  96,// 0+32 + 64
+    NFC_IRQ                         =  97// 1+32+64
+} IRQn_Type, *PIRQn_Type;
+
+
+typedef VOID (*HAL_VECTOR_FUN) (VOID);
+
+typedef enum _VECTOR_TABLE_TYPE_{
+    DEDECATED_VECTRO_TABLE,
+    PERIPHERAL_VECTOR_TABLE
+}VECTOR_TABLE_TYPE, *PVECTOR_TABLE_TYPE;
+
+
+typedef u32 (*IRQ_FUN)(VOID *Data);
+
+typedef struct _IRQ_HANDLE_ {
+    IRQ_FUN     IrqFun;
+    IRQn_Type   IrqNum;
+    u32         Data;
+    u32         Priority;
+}IRQ_HANDLE, *PIRQ_HANDLE;
+
+
+#endif //_HAL_IRQN_H_

lib/fwlib/hal_mii.h

@@ -0,0 +1,118 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_MII_H_
+#define _HAL_MII_H_
+
+#include "rtl8195a_mii.h"
+
+
+/**
+ * LOG Configurations
+ */
+
+#define NOLOG
+
+#define LOG_TAG           "NoTag"
+#define LOG_INFO_HEADER   "I"
+#define LOG_DEBUG_HEADER  "D"
+#define LOG_ERROR_HEADER  "E"
+#define LOG_TEST_HEADER   "T"
+
+#define IDENT_TWO_SPACE    "  "
+#define IDENT_FOUR_SPACE   "    "
+
+#define LOG_INFO(...)  do {\
+            DiagPrintf("\r"LOG_INFO_HEADER"/"LOG_TAG": " __VA_ARGS__);\
+}while(0)
+
+#define LOG_DEBUG(...)  do {\
+            DiagPrintf("\r"LOG_DEBUG_HEADER"/"LOG_TAG": " __VA_ARGS__);\
+}while(0)
+
+#define LOG_ERROR(...)  do {\
+            DiagPrintf("\r"LOG_ERROR_HEADER"/"LOG_TAG": " __VA_ARGS__);\
+}while(0)
+
+#ifdef NOLOG
+    #define LOGI
+    #define LOGD
+    #define LOGE
+    #define LOGI2
+    #define LOGD2
+    #define LOGE2
+    #define LOGI4
+    #define LOGD4
+    #define LOGE4
+#else
+    #define LOGI  LOG_INFO
+    #define LOGD  LOG_DEBUG
+    #define LOGE  LOG_ERROR
+    #define LOGI2(...) LOG_INFO(IDENT_TWO_SPACE __VA_ARGS__)
+    #define LOGD2(...) LOG_DEBUG(IDENT_TWO_SPACE __VA_ARGS__)
+    #define LOGE2(...) LOG_ERROR(IDENT_TWO_SPACE __VA_ARGS__)
+    #define LOGI4(...) LOG_INFO(IDENT_FOUR_SPACE __VA_ARGS__)
+    #define LOGD4(...) LOG_DEBUG(IDENT_FOUR_SPACE __VA_ARGS__)
+    #define LOGE4(...) LOG_ERROR(IDENT_FOUR_SPACE __VA_ARGS__)
+#endif
+
+#define ANSI_COLOR_GREEN   "\x1b[32m"
+#define ANSI_COLOR_CYAN    "\x1b[36m"
+#define ANSI_COLOR_YELLOW  "\x1b[33m"
+#define ANSI_COLOR_MAGENTA "\x1b[35m"
+#define ANSI_COLOR_RED     "\x1b[31m"
+#define ANSI_COLOR_BLUE    "\x1b[34m"
+#define ANSI_COLOR_RESET   "\x1b[0m"
+
+#define DBG_ENTRANCE LOGI(ANSI_COLOR_GREEN "=> %s() <%s>\n" ANSI_COLOR_RESET, \
+        __func__, __FILE__)
+
+
+// GMAC MII Configurations
+#ifdef LOG_TAG
+#undef LOG_TAG
+#define LOG_TAG  "MII"
+#endif
+
+
+typedef struct _HAL_MII_ADAPTER_ {
+    u32 InterruptMask;
+    PPHY_MODE_INFO pPhyModeInfo;
+}HAL_MII_ADAPTER, *PHAL_MII_ADAPTER;
+
+typedef struct _HAL_MII_OP_ {
+    BOOL (*HalMiiGmacInit)(VOID *Data);
+    BOOL (*HalMiiInit)(VOID *Data);
+    BOOL (*HalMiiGmacReset)(VOID *Data);
+    BOOL (*HalMiiGmacEnablePhyMode)(VOID *Data);
+    u32  (*HalMiiGmacXmit)(VOID *Data);
+    VOID (*HalMiiGmacCleanTxRing)(VOID *Data);
+    VOID (*HalMiiGmacFillTxInfo)(VOID *Data);
+    VOID (*HalMiiGmacFillRxInfo)(VOID *Data);
+    VOID (*HalMiiGmacTx)(VOID *Data);
+    VOID (*HalMiiGmacRx)(VOID *Data);
+    VOID (*HalMiiGmacSetDefaultEthIoCmd)(VOID *Data);
+    VOID (*HalMiiGmacInitIrq)(VOID *Data);
+    u32  (*HalMiiGmacGetInterruptStatus)(VOID);
+    VOID (*HalMiiGmacClearInterruptStatus)(u32 IsrStatus);
+}HAL_MII_OP, *PHAL_MII_OP;
+
+VOID HalMiiOpInit(IN VOID *Data);
+
+typedef struct _MII_ADAPTER_ {
+    PHAL_MII_OP      pHalMiiOp;
+    PHAL_MII_ADAPTER pHalMiiAdapter;
+    PTX_INFO         pTx_Info;
+    PRX_INFO         pRx_Info;
+    VOID*            TxBuffer;
+    VOID*            RxBuffer;
+}MII_ADAPTER, *PMII_ADAPTER;
+
+#endif
+

lib/fwlib/hal_misc.h

@@ -0,0 +1,30 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _MISC_H_
+#define _MISC_H_
+
+#include <basic_types.h>
+
+#ifdef CONFIG_TIMER_MODULE
+extern _LONG_CALL_ u32 HalDelayUs(u32 us);
+#endif
+
+extern _LONG_CALL_ u32 HalGetCpuClk(VOID);
+extern _LONG_CALL_ u8 HalGetRomInfo(VOID);
+
+extern _LONG_CALL_ void *_memset( void *s, int c, SIZE_T n );
+extern _LONG_CALL_ void *_memcpy( void *s1, const void *s2, SIZE_T n );
+extern _LONG_CALL_ int _memcmp( const void *av, const void *bv, SIZE_T len );
+
+extern _LONG_CALL_ SIZE_T _strlen(const char *s);
+extern _LONG_CALL_ int _strcmp(const char *cs, const char *ct);
+
+
+#endif  //_MISC_H_

lib/fwlib/hal_nfc.h

@@ -0,0 +1,22 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_NFC_H_
+#define _HAL_NFC_H_
+
+#include "rtl8195a_nfc.h"
+
+
+VOID HalNFCOpInit(
+    IN  VOID *Data
+);
+
+
+#endif
+

lib/fwlib/hal_pcm.h

@@ -0,0 +1,104 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_PCM_H_
+#define _HAL_PCM_H_
+
+#include "rtl8195a_pcm.h"
+/*
+typedef struct _GDMA_CH_LLI_ELE_ {
+    u32                   Sarx;
+    u32                   Darx;
+    u32                   Llpx;
+    u32                   CtlxLow;
+    u32                   CtlxUp;
+    u32                   Temp;
+}GDMA_CH_LLI_ELE, *PGDMA_CH_LLI_ELE;
+#if 1
+#if 0
+typedef struct _GDMA_CH_LLI_ {
+    PGDMA_CH_LLI_ELE      pLliEle;
+    PGDMA_CH_LLI          pNextLli;
+}GDMA_CH_LLI, *PGDMA_CH_LLI;
+
+typedef struct _BLOCK_SIZE_LIST_ {
+    u32                  BlockSize;
+    PBLOCK_SIZE_LIST     pNextBlockSiz;
+}BLOCK_SIZE_LIST, *PBLOCK_SIZE_LIST;
+#else
+struct GDMA_CH_LLI {
+    PGDMA_CH_LLI_ELE                pLliEle;
+    struct GDMA_CH_LLI             *pNextLli;
+};
+
+struct BLOCK_SIZE_LIST {
+    u32                             BlockSize;
+    struct BLOCK_SIZE_LIST          *pNextBlockSiz;
+};
+
+#endif
+
+#endif
+typedef struct _HAL_GDMA_ADAPTER_ {
+    u32                   ChSar;
+    u32                   ChDar;
+    GDMA_CHANNEL_NUM      ChEn;
+    GDMA_CTL_REG          GdmaCtl;
+    GDMA_CFG_REG          GdmaCfg;
+    u32                   PacketLen;
+    u32                   BlockLen;
+    u32                   MuliBlockCunt;
+    u32                   MaxMuliBlock;
+    struct GDMA_CH_LLI          *pLlix;
+    struct BLOCK_SIZE_LIST      *pBlockSizeList;
+
+    PGDMA_CH_LLI_ELE            pLli;
+    u32                         NextPlli;
+    u8                    TestItem;
+    u8                          ChNum;
+    u8                          GdmaIndex;
+    u8                          IsrCtrl:1;
+    u8                          GdmaOnOff:1;
+    u8                          Llpctrl:1;
+    u8                          Lli0:1;
+    u8                          Rsvd4to7:4;
+    u8                          GdmaIsrType;
+}HAL_GDMA_ADAPTER, *PHAL_GDMA_ADAPTER;
+
+*/
+
+typedef struct _HAL_PCM_ADAPTER_ {
+    u32                       Enable:1;
+    PCM_CTL_REG               PcmCtl;
+    PCM_CHCNR03_REG           PcmChCNR03;
+    PCM_TSR03_REG             PcmTSR03;
+    PCM_BSIZE03_REG           PcmBSize03;
+    u32                       abc;
+    u8                        PcmIndex;
+    u8                        PcmCh;
+}HAL_PCM_ADAPTER, *PHAL_PCM_ADAPTER;
+
+
+typedef struct _HAL_PCM_OP_ {
+    VOID (*HalPcmOnOff)(VOID *Data);
+    BOOL (*HalPcmInit)(VOID *Data);
+    BOOL (*HalPcmSetting)(VOID *Data);
+    BOOL (*HalPcmEn)(VOID *Data);
+    BOOL (*HalPcmIsrEnAndDis) (VOID *Data);
+    BOOL (*HalPcmDumpReg)(VOID *Data);
+    BOOL (*HalPcm)(VOID *Data);
+}HAL_PCM_OP, *PHAL_PCM_OP;
+
+
+VOID HalPcmOpInit(
+    IN  VOID *Data
+);
+
+
+#endif

lib/fwlib/hal_peri_on.h

@@ -0,0 +1,451 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_PERI_ON_H_
+#define _HAL_PERI_ON_H_
+
+#define MASK_ALLON                          0xFFFFFFFF
+
+#define HAL_PERI_ON_READ32(addr)            HAL_READ32(PERI_ON_BASE, addr)
+#define HAL_PERI_ON_WRITE32(addr, value)    HAL_WRITE32(PERI_ON_BASE, addr, value)
+#define HAL_PERI_ON_READ16(addr)            HAL_READ16(PERI_ON_BASE, addr)
+#define HAL_PERI_ON_WRITE16(addr, value)    HAL_WRITE16(PERI_ON_BASE, addr, value)
+#define HAL_PERI_ON_READ8(addr)             HAL_READ8(PERI_ON_BASE, addr)
+#define HAL_PERI_ON_WRITE8(addr, value)     HAL_WRITE8(PERI_ON_BASE, addr, value)
+#define HAL_PERL_ON_FUNC_CTRL(addr,value,ctrl)  \
+        HAL_PERI_ON_WRITE32(addr, ((HAL_PERI_ON_READ32(addr) & (~value))|((MASK_ALLON - ctrl + 1) & value)))
+#define HAL_PERL_ON_PIN_SEL(addr,mask,value)  \
+        HAL_PERI_ON_WRITE32(addr, ((HAL_PERI_ON_READ32(addr) & (~mask)) | value))
+
+//40 REG_SYS_REGU_CTRL0
+#define LDO25M_CTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_SYS_REGU_CTRL0, BIT_SYS_REGU_LDO25M_EN, ctrl)
+
+//A0 SYS_DEBUG_CTRL
+#define DEBUG_PIN_CTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_SYS_DEBUG_CTRL, BIT_SYS_DBG_PIN_EN, ctrl)
+
+//A4 SYS_PINMUX_CTRL
+#define SIC_PIN_CTRL(ctrl)      HAL_PERL_ON_FUNC_CTRL(REG_SYS_PINMUX_CTRL, BIT_SIC_PIN_EN, ctrl)
+#define EEPROM_PIN_CTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_SYS_PINMUX_CTRL, BIT_EEPROM_PIN_EN, ctrl)
+
+
+//210 SOV_FUNC_EN
+#define LXBUS_FCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_LXBUS_EN, ctrl)
+#define FLASH_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SPI_FLASH_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_FLASH_EN, ctrl);}
+
+#define MEM_CTRL_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SDR_SDRAM_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_MEM_CTRL_EN, ctrl);}
+
+#define LOC_UART_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(LOG_UART_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_LOG_UART_EN, ctrl);}
+
+#define GDMA0_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(GDMA0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_GDMA0_EN, ctrl);}
+
+#define GDMA1_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(GDMA1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_GDMA1_EN, ctrl);}
+
+#define GTIMER_FCTRL(ctrl)      { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(TIMER_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_GTIMER_EN, ctrl);}
+
+#define SECURITY_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(CRYPTO_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_FUNC_EN, BIT_SOC_SECURITY_ENGINE_EN, ctrl);}
+
+//214 SOC_HCI_COM_FUNC_EN
+#define SDIOD_ON_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SDIO_DEVICE_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_SDIOD_ON_EN, ctrl);}
+
+#define SDIOD_OFF_FCTRL(ctrl)   { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SDIO_DEVICE_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_SDIOD_OFF_EN, ctrl);}
+
+#define SDIOH_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SDIO_HOST_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_SDIOH_EN, ctrl);}
+
+#define SDIO_ON_RST_MASK(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_SDIOD_ON_RST_MUX, ctrl)
+#define OTG_FCTRL(ctrl)         { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(USB_OTG_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_OTG_EN, ctrl);}
+
+#define OTG_RST_MASK(ctrl)      HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_OTG_RST_MUX, ctrl)
+#define MII_FCTRL(ctrl)         { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(MII_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_MII_EN, ctrl);}
+
+#define MII_MUX_SEL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_SM_SEL, ctrl)
+#define WL_MACON_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(WIFI_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_HCI_COM_FUNC_EN, BIT_SOC_HCI_WL_MACON_EN, ctrl);}
+
+//218 SOC_PERI_FUNC0_EN
+#define UART0_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_UART0_EN, ctrl);}
+
+#define UART1_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_UART1_EN, ctrl);}
+
+#define UART2_FCTRL(ctrl)       { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART2_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_UART2_EN, ctrl);}
+
+#define SPI0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SPI0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_SPI0_EN, ctrl);}
+
+#define SPI1_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SPI1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_SPI1_EN, ctrl);}
+
+#define SPI2_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(SPI2_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_SPI2_EN, ctrl);}
+
+#define I2C0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2C0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2C0_EN, ctrl);}
+
+#define I2C1_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2C1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2C1_EN, ctrl);}
+
+#define I2C2_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2C2_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2C2_EN, ctrl);}
+
+#define I2C3_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2C3_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2C3_EN, ctrl);}
+
+#define I2S0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2S0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2S0_EN, ctrl);}
+
+#define I2S1_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(I2S1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_I2S1_EN, ctrl);}
+
+#define PCM0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(PCM0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_PCM0_EN, ctrl);}
+
+#define PCM1_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(PCM1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC0_EN, BIT_PERI_PCM1_EN, ctrl);}
+
+//21C SOC_PERI_FUNC1_EN
+#define ADC0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(ADC_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC1_EN, BIT_PERI_ADC0_EN, ctrl);}
+
+#define DAC0_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(DAC_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC1_EN, BIT_PERI_DAC0_EN, ctrl);}
+
+#define DAC1_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(DAC_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC1_EN, BIT_PERI_DAC1_EN, ctrl);}
+
+#define GPIO_FCTRL(ctrl)        { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(GPIO_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_FUNC1_EN, BIT_PERI_GPIO_EN, ctrl);}
+
+//220 SOC_PERI_BD_FUNC0_EN
+#define UART0_BD_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART0_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_BD_FUNC0_EN, BIT_PERI_UART0_BD_EN, ctrl);}
+
+#define UART1_BD_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART1_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_BD_FUNC0_EN, BIT_PERI_UART1_BD_EN, ctrl);}
+
+#define UART2_BD_FCTRL(ctrl)    { \
+                                    if (!ctrl) { \
+                                        HAL_READ32(UART2_REG_BASE,0);\
+                                    }\
+                                    HAL_PERL_ON_FUNC_CTRL(REG_SOC_PERI_BD_FUNC0_EN, BIT_PERI_UART2_BD_EN, ctrl);}
+
+//230 PESOC_CLK_CTRL
+#define ACTCK_CPU_CCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_CKE_PLFM, ctrl)
+#define ACTCK_TRACE_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_TRACE_EN, ctrl)
+#define SLPCK_TRACE_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_TRACE_EN, ctrl)
+#define ACTCK_VENDOR_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_VENDOR_REG_EN, ctrl)
+#define SLPCK_VENDOR_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_VENDOR_REG_EN, ctrl)
+#define ACTCK_FLASH_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_FLASH_EN, ctrl)
+#define SLPCK_FLASH_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_FLASH_EN, ctrl)
+#define ACTCK_SDR_CCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_SDR_EN, ctrl)
+#define SLPCK_SDR_CCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_SDR_EN, ctrl)
+#define ACTCK_LOG_UART_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_LOG_UART_EN, ctrl)
+#define SLPCK_LOG_UART_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_LOG_UART_EN, ctrl)
+#define ACTCK_TIMER_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_TIMER_EN, ctrl)
+#define SLPCK_TIMER_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_TIMER_EN, ctrl)
+#define ACTCK_GDMA0_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_GDMA0_EN, ctrl)
+#define SLPCK_GDMA0_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_GDMA0_EN, ctrl)
+#define ACTCK_GDMA1_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_GDMA1_EN, ctrl)
+#define SLPCK_GDMA1_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_GDMA1_EN, ctrl)
+#define ACTCK_GPIO_CCTRL(ctrl)      HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_GPIO_EN, ctrl)
+#define SLPCK_GPIO_CCTRL(ctrl)      HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_GPIO_EN, ctrl)
+#define ACTCK_BTCMD_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_ACTCK_BTCMD_EN, ctrl)
+#define SLPCK_BTCMD_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_CLK_CTRL, BIT_SOC_SLPCK_BTCMD_EN, ctrl)
+
+//234 PESOC_PERI_CLK_CTRL0
+#define ACTCK_UART0_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_UART0_EN, ctrl)
+#define SLPCK_UART0_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_UART0_EN, ctrl)
+#define ACTCK_UART1_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_UART1_EN, ctrl)
+#define SLPCK_UART1_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_UART1_EN, ctrl)
+#define ACTCK_UART2_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_UART2_EN, ctrl)
+#define SLPCK_UART2_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_UART2_EN, ctrl)
+#define ACTCK_SPI0_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_SPI0_EN, ctrl)
+#define SLPCK_SPI0_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_SPI0_EN, ctrl)
+#define ACTCK_SPI1_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_SPI1_EN, ctrl)
+#define SLPCK_SPI1_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_SPI1_EN, ctrl)
+#define ACTCK_SPI2_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_ACTCK_SPI2_EN, ctrl)
+#define SLPCK_SPI2_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL0, BIT_SOC_SLPCK_SPI2_EN, ctrl)
+
+//238 PESOC_PERI_CLK_CTRL1
+#define ACTCK_I2C0_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_I2C0_EN, ctrl)
+#define SLPCK_I2C0_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_I2C0_EN, ctrl)
+#define ACTCK_I2C1_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_I2C1_EN, ctrl)
+#define SLPCK_I2C1_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_I2C1_EN, ctrl)
+#define ACTCK_I2C2_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_I2C2_EN, ctrl)
+#define SLPCK_I2C2_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_I2C2_EN, ctrl)
+#define ACTCK_I2C3_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_I2C3_EN, ctrl)
+#define SLPCK_I2C3_CCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_I2C3_EN, ctrl)
+#define ACTCK_I2S_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_I2S_EN, ctrl)
+#define SLPCK_I2S_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_I2S_EN, ctrl)
+#define ACTCK_PCM_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_PCM_EN, ctrl)
+#define SLPCK_PCM_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_PCM_EN, ctrl)
+#define ACTCK_ADC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_ADC_EN, ctrl)
+#define SLPCK_ADC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_ADC_EN, ctrl)
+#define ACTCK_DAC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_ACTCK_DAC_EN, ctrl)
+#define SLPCK_DAC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CLK_CTRL1, BIT_SOC_SLPCK_DAC_EN, ctrl)
+
+//240 PESOC_HCI_CLK_CTRL0
+#define ACTCK_SDIOD_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_ACTCK_SDIO_DEV_EN, ctrl)
+#define SLPCK_SDIOD_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_SLPCK_SDIO_DEV_EN, ctrl)
+#define ACTCK_SDIOH_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_ACTCK_SDIO_HST_EN, ctrl)
+#define SLPCK_SDIOH_CCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_SLPCK_SDIO_HST_EN, ctrl)
+#define ACTCK_OTG_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_ACTCK_OTG_EN, ctrl)
+#define SLPCK_OTG_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_SLPCK_OTG_EN, ctrl)
+#define ACTCK_MII_MPHY_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_ACTCK_MII_MPHY_EN, ctrl)
+#define SLPCK_MII_MPHY_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_HCI_CLK_CTRL0, BIT_SOC_SLPCK_MII_MPHY_EN, ctrl)
+
+//244 PESOC_COM_CLK_CTRL1
+#define ACTCK_WL_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_ACTCK_WL_EN, ctrl)
+#define SLPCK_WL_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_SLPCK_WL_EN, ctrl)
+#define ACTCK_SEC_ENG_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_ACTCK_SECURITY_ENG_EN, ctrl)
+#define SLPCK_SEC_ENG_CCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_SLPCK_SECURITY_ENG_EN, ctrl)
+#define ACTCK_NFC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_ACTCK_NFC_EN, ctrl)
+#define SLPCK_NFC_CCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_SLPCK_NFC_EN, ctrl)
+#define NFC_CAL_CCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_PESOC_COM_CLK_CTRL1, BIT_SOC_NFC_CAL_EN, ctrl)
+
+//250 REG_PERI_CLK_SEL
+#define TRACE_CLK_SEL(num)      HAL_PERL_ON_PIN_SEL(REG_PESOC_CLK_SEL, (BIT_MASK_PESOC_TRACE_CK_SEL << BIT_SHIFT_PESOC_TRACE_CK_SEL), BIT_PESOC_TRACE_CK_SEL(num))
+#define FLASH_CLK_SEL(num)      HAL_PERL_ON_PIN_SEL(REG_PESOC_CLK_SEL, (BIT_MASK_PESOC_FLASH_CK_SEL << BIT_SHIFT_PESOC_FLASH_CK_SEL), BIT_PESOC_FLASH_CK_SEL(num))
+#define SDR_CLK_SEL(num)        HAL_PERL_ON_PIN_SEL(REG_PESOC_CLK_SEL, (BIT_MASK_PESOC_SDR_CK_SEL << BIT_SHIFT_PESOC_SDR_CK_SEL), BIT_PESOC_SDR_CK_SEL(num))
+#define I2C_SCLK_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PESOC_CLK_SEL, (BIT_MASK_PESOC_PERI_SCLK_SEL << BIT_SHIFT_PESOC_PERI_SCLK_SEL), BIT_PESOC_PERI_SCLK_SEL(num))
+
+//270 REG_OSC32K_CTRL
+#define OSC32K_CKGEN_CTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_OSC32K_CTRL, BIT_32K_POW_CKGEN_EN, ctrl)
+
+//280 REG_UART_MUX_CTRL
+#define UART0_PIN_CTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_UART_MUX_CTRL, BIT_UART0_PIN_EN, ctrl)
+#define UART0_PIN_SEL(num)      HAL_PERL_ON_PIN_SEL(REG_UART_MUX_CTRL, (BIT_MASK_UART0_PIN_SEL << BIT_SHIFT_UART0_PIN_SEL), BIT_UART0_PIN_SEL(num))
+#define UART1_PIN_CTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_UART_MUX_CTRL, BIT_UART1_PIN_EN, ctrl)
+#define UART1_PIN_SEL(num)      HAL_PERL_ON_PIN_SEL(REG_UART_MUX_CTRL, (BIT_MASK_UART1_PIN_SEL << BIT_SHIFT_UART1_PIN_SEL), BIT_UART1_PIN_SEL(num))
+#define UART2_PIN_CTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_UART_MUX_CTRL, BIT_UART2_PIN_EN, ctrl)
+#define UART2_PIN_SEL(num)      HAL_PERL_ON_PIN_SEL(REG_UART_MUX_CTRL, (BIT_MASK_UART2_PIN_SEL << BIT_SHIFT_UART2_PIN_SEL), BIT_UART2_PIN_SEL(num))
+
+//284 REG_SPI_MUX_CTRL
+#define SPI0_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_SPI_MUX_CTRL, BIT_SPI0_PIN_EN, ctrl)
+#define SPI0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_SPI_MUX_CTRL, (BIT_MASK_SPI0_PIN_SEL << BIT_SHIFT_SPI0_PIN_SEL), BIT_SPI0_PIN_SEL(num))
+#define SPI1_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_SPI_MUX_CTRL, BIT_SPI1_PIN_EN, ctrl)
+#define SPI1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_SPI_MUX_CTRL, (BIT_MASK_SPI1_PIN_SEL << BIT_SHIFT_SPI1_PIN_SEL), BIT_SPI1_PIN_SEL(num))
+#define SPI2_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_SPI_MUX_CTRL, BIT_SPI2_PIN_EN, ctrl)
+#define SPI2_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_SPI_MUX_CTRL, (BIT_MASK_SPI2_PIN_SEL << BIT_SHIFT_SPI2_PIN_SEL), BIT_SPI2_PIN_SEL(num))
+#define SPI0_MULTI_CS_CTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_SPI_MUX_CTRL, BIT_SPI0_MULTI_CS_EN, ctrl)
+
+//288 REG_I2C_MUX_CTRL
+#define I2C0_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2C_MUX_CTRL, BIT_I2C0_PIN_EN, ctrl)
+#define I2C0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2C_MUX_CTRL, (BIT_MASK_I2C0_PIN_SEL << BIT_SHIFT_I2C0_PIN_SEL), BIT_I2C0_PIN_SEL(num))
+#define I2C1_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2C_MUX_CTRL, BIT_I2C1_PIN_EN, ctrl)
+#define I2C1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2C_MUX_CTRL, (BIT_MASK_I2C1_PIN_SEL << BIT_SHIFT_I2C1_PIN_SEL), BIT_I2C1_PIN_SEL(num))
+#define I2C2_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2C_MUX_CTRL, BIT_I2C2_PIN_EN, ctrl)
+#define I2C2_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2C_MUX_CTRL, (BIT_MASK_I2C2_PIN_SEL << BIT_SHIFT_I2C2_PIN_SEL), BIT_I2C2_PIN_SEL(num))
+#define I2C3_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2C_MUX_CTRL, BIT_I2C3_PIN_EN, ctrl)
+#define I2C3_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2C_MUX_CTRL, (BIT_MASK_I2C3_PIN_SEL << BIT_SHIFT_I2C3_PIN_SEL), BIT_I2C3_PIN_SEL(num))
+
+//28C REG_I2S_MUX_CTRL
+#define I2S0_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_I2S0_PIN_EN, ctrl)
+#define I2S0_MCK_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_I2S0_MCK_EN, ctrl)
+#define I2S0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2S_MUX_CTRL, (BIT_MASK_I2S0_PIN_SEL << BIT_SHIFT_I2S0_PIN_SEL), BIT_I2S0_PIN_SEL(num))
+#define I2S1_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_I2S1_PIN_EN, ctrl)
+#define I2S1_MCK_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_I2S1_MCK_EN, ctrl)
+#define I2S1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2S_MUX_CTRL, (BIT_MASK_I2S1_PIN_SEL << BIT_SHIFT_I2S1_PIN_SEL), BIT_I2S1_PIN_SEL(num))
+#define PCM0_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_PCM0_PIN_EN, ctrl)
+#define PCM0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2S_MUX_CTRL, (BIT_MASK_PCM0_PIN_SEL << BIT_SHIFT_PCM0_PIN_SEL), BIT_PCM0_PIN_SEL(num))
+#define PCM1_PIN_CTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_I2S_MUX_CTRL, BIT_PCM1_PIN_EN, ctrl)
+#define PCM1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_I2S_MUX_CTRL, (BIT_MASK_PCM1_PIN_SEL << BIT_SHIFT_PCM1_PIN_SEL), BIT_PCM1_PIN_SEL(num))
+
+//2A0 HCI_PINMUX_CTRL
+#define SDIOD_PIN_FCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_HCI_PINMUX_CTRL, BIT_HCI_SDIOD_PIN_EN, ctrl)
+#define SDIOH_PIN_FCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_HCI_PINMUX_CTRL, BIT_HCI_SDIOH_PIN_EN, ctrl)
+#define MII_PIN_FCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_HCI_PINMUX_CTRL, BIT_HCI_MII_PIN_EN, ctrl)
+
+//2A4 WL_PINMUX_CTRL
+#define LED_PIN_FCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_WL_LED_PIN_EN, ctrl)
+#define LED_PIN_SEL(num)        HAL_PERL_ON_PIN_SEL(REG_WL_PINMUX_CTRL, (BIT_MASK_WL_LED_PIN_SEL << BIT_SHIFT_WL_LED_PIN_SEL), BIT_WL_LED_PIN_SEL(num))
+#define ANT0_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_WL_ANT0_PIN_EN, ctrl)
+#define ANT1_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_WL_ANT1_PIN_EN, ctrl)
+#define BTCOEX_PIN_FCTRL(ctrl)  HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_WL_BTCOEX_PIN_EN, ctrl)
+#define BTCMD_PIN_FCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_WL_BTCMD_PIN_EN, ctrl)
+#define NFC_PIN_FCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_WL_PINMUX_CTRL, BIT_NFC_PIN_EN, ctrl)
+
+//2AC PWM_PINMUX_CTRL
+#define PWM0_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_PWM0_PIN_EN, ctrl)
+#define PWM0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_PWM0_PIN_SEL << BIT_SHIFT_PWM0_PIN_SEL), BIT_PWM0_PIN_SEL(num))
+#define PWM1_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_PWM1_PIN_EN, ctrl)
+#define PWM1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_PWM1_PIN_SEL << BIT_SHIFT_PWM1_PIN_SEL), BIT_PWM1_PIN_SEL(num))
+#define PWM2_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_PWM2_PIN_EN, ctrl)
+#define PWM2_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_PWM2_PIN_SEL << BIT_SHIFT_PWM2_PIN_SEL), BIT_PWM2_PIN_SEL(num))
+#define PWM3_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_PWM3_PIN_EN, ctrl)
+#define PWM3_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_PWM3_PIN_SEL << BIT_SHIFT_PWM3_PIN_SEL), BIT_PWM3_PIN_SEL(num))
+#define ETE0_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_ETE0_PIN_EN, ctrl)
+#define ETE0_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_ETE0_PIN_SEL << BIT_SHIFT_ETE0_PIN_SEL), BIT_ETE0_PIN_SEL(num))
+#define ETE1_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_ETE1_PIN_EN, ctrl)
+#define ETE1_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_ETE1_PIN_SEL << BIT_SHIFT_ETE1_PIN_SEL), BIT_ETE1_PIN_SEL(num))
+#define ETE2_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_ETE2_PIN_EN, ctrl)
+#define ETE2_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_ETE2_PIN_SEL << BIT_SHIFT_ETE2_PIN_SEL), BIT_ETE2_PIN_SEL(num))
+#define ETE3_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PWM_PINMUX_CTRL, BIT_ETE3_PIN_EN, ctrl)
+#define ETE3_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_PWM_PINMUX_CTRL, (BIT_MASK_ETE3_PIN_SEL << BIT_SHIFT_ETE3_PIN_SEL), BIT_ETE3_PIN_SEL(num))
+
+//2C0 CPU_PERIPHERAL_CTRL
+#define SPI_FLASH_PIN_FCTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_CPU_PERIPHERAL_CTRL, BIT_SPI_FLSH_PIN_EN, ctrl)
+#define SPI_FLASH_PIN_SEL(num)       HAL_PERL_ON_PIN_SEL(REG_CPU_PERIPHERAL_CTRL, (BIT_MASK_SPI_FLSH_PIN_SEL << BIT_SHIFT_SPI_FLSH_PIN_SEL), BIT_SPI_FLSH_PIN_SEL(num))
+#define SDR_PIN_FCTRL(ctrl)          HAL_PERL_ON_FUNC_CTRL(REG_CPU_PERIPHERAL_CTRL, BIT_SDR_PIN_EN, ctrl)
+#define TRACE_PIN_FCTRL(ctrl)        HAL_PERL_ON_FUNC_CTRL(REG_CPU_PERIPHERAL_CTRL, BIT_TRACE_PIN_EN, ctrl)
+#define LOG_UART_PIN_FCTRL(ctrl)     HAL_PERL_ON_FUNC_CTRL(REG_CPU_PERIPHERAL_CTRL, BIT_LOG_UART_PIN_EN, ctrl)
+#define LOG_UART_IR_FCTRL(ctrl)      HAL_PERL_ON_FUNC_CTRL(REG_CPU_PERIPHERAL_CTRL, BIT_LOG_UART_IR_EN, ctrl)
+
+//300 REG_PESOC_MEM_CTRL
+#define SDR_DDL_FCTRL(ctrl)      HAL_PERL_ON_PIN_SEL(REG_PESOC_MEM_CTRL, (BIT_MASK_PESOC_SDR_DDL_CTRL << BIT_SHIFT_PESOC_SDR_DDL_CTRL), BIT_PESOC_SDR_DDL_CTRL(ctrl))
+#define FLASH_DDL_FCTRL(ctrl)    HAL_PERL_ON_PIN_SEL(REG_PESOC_MEM_CTRL, (BIT_MASK_PESOC_FLASH_DDL_CTRL << BIT_SHIFT_PESOC_FLASH_DDL_CTRL), BIT_PESOC_FLASH_DDL_CTRL(ctrl))
+
+//304 REG_PESOC_SOC_CTRL
+#define SRAM_MUX_CFG(num)        HAL_PERL_ON_PIN_SEL(REG_PESOC_SOC_CTRL, (BIT_MASK_PESOC_SRAM_MUX_CFG << BIT_SHIFT_PESOC_SRAM_MUX_CFG), BIT_PESOC_SRAM_MUX_CFG(num))
+#define LX_WL_SWAP_CTRL(ctrl)    HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_LX_WL_SWAP_SEL, ctrl)
+#define LX_MST_SWAP_CTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_LX_MST_SWAP_SEL, ctrl)
+#define LX_SLV_SWAP_CTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_LX_SLV_SWAP_SEL, ctrl)
+#define MII_LX_WRAPPER_FCTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_MII_LX_WRAPPER_EN, ctrl)
+#define MII_LX_MST_SWAP_CTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_MII_LX_MST_SWAP_SEL, ctrl)
+#define MII_LX_SLV_SWAP_CTRL(ctrl)   HAL_PERL_ON_FUNC_CTRL(REG_PESOC_SOC_CTRL, BIT_PESOC_MII_LX_SLV_SWAP_SEL, ctrl)
+#define GDMA_CFG(num)            HAL_PERL_ON_PIN_SEL(REG_PESOC_SOC_CTRL, (BIT_MASK_PESOC_GDMA_CFG << BIT_SHIFT_PESOC_GDMA_CFG), BIT_PESOC_GDMA_CFG(num))
+
+//308 PESOC_PERI_CTRL
+#define SPI_RN_FCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_PESOC_PERI_CTRL, BIT_SOC_FUNC_SPI_RN, ctrl)
+
+//320 GPIO_SHTDN_CTRL
+#define GPIO_GPA_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPA_SHTDN_N, ctrl)
+#define GPIO_GPB_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPB_SHTDN_N, ctrl)
+#define GPIO_GPC_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPC_SHTDN_N, ctrl)
+#define GPIO_GPD_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPD_SHTDN_N, ctrl)
+#define GPIO_GPE_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPE_SHTDN_N, ctrl)
+#define GPIO_GPF_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPF_SHTDN_N, ctrl)
+#define GPIO_GPG_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPG_SHTDN_N, ctrl)
+#define GPIO_GPH_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPH_SHTDN_N, ctrl)
+#define GPIO_GPI_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPI_SHTDN_N, ctrl)
+#define GPIO_GPJ_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPJ_SHTDN_N, ctrl)
+#define GPIO_GPK_SHTDN_N_FCTRL(ctrl) HAL_PERL_ON_FUNC_CTRL(REG_GPIO_SHTDN_CTRL, BIT_GPIO_GPK_SHTDN_N, ctrl)
+
+//374
+#define EGTIM_FCTRL(ctrl)       HAL_PERL_ON_FUNC_CTRL(REG_PERI_EGTIM_CTRL, BIT_PERI_EGTIM_EN, ctrl)
+#define EGTIM_RSIG_SEL(num)     HAL_PERL_ON_PIN_SEL(REG_PERI_EGTIM_CTRL, (BIT_MASK_PERI_EGTIM_REF_SIG_SEL << BIT_SHIFT_PERI_EGTIM_REF_SIG_SEL), BIT_PERI_EGTIM_REF_SIG_SEL(num))
+#define EGTIME_PIN_G0_OPT_SEL(num) HAL_PERL_ON_PIN_SEL(REG_PERI_EGTIM_CTRL, (BIT_MASK_PERI_EGTIM_PIN_GROUP0_OPT_SEL << BIT_SHIFT_PERI_EGTIM_PIN_GROUP0_OPT_SEL), BIT_PERI_EGTIM_PIN_GROUP0_OPT_SEL(num))
+#define EGTIME_PIN_G1_OPT_SEL(num) HAL_PERL_ON_PIN_SEL(REG_PERI_EGTIM_CTRL, (BIT_MASK_PERI_EGTIM_PIN_GROUP1_OPT_SEL << BIT_SHIFT_PERI_EGTIM_PIN_GROUP1_OPT_SEL), BIT_PERI_EGTIM_PIN_GROUP1_OPT_SEL(num))
+#define EGTIME_PIN_G2_OPT_SEL(num) HAL_PERL_ON_PIN_SEL(REG_PERI_EGTIM_CTRL, (BIT_MASK_PERI_EGTIM_PIN_GROUP2_OPT_SEL << BIT_SHIFT_PERI_EGTIM_PIN_GROUP2_OPT_SEL), BIT_PERI_EGTIM_PIN_GROUP2_OPT_SEL(num))
+
+
+#endif //_HAL_PERI_ON_H_
+

lib/fwlib/hal_pinmux.h

@@ -0,0 +1,64 @@
+#ifndef _HAL_PINMUX_
+#define _HAL_PINMUX_
+
+
+//Function Index
+#define UART0       0
+#define UART1       1
+#define UART2       2
+#define SPI0        8
+#define SPI1        9
+#define SPI2        10
+#define SPI0_MCS    15
+#define I2C0        16
+#define I2C1        17
+#define I2C2        18
+#define I2C3        19
+#define I2S0        24
+#define I2S1        25
+#define PCM0        28
+#define PCM1        29
+#define ADC0        32
+#define DAC0        36
+#define DAC1        37
+#define SDIOD       64
+#define SDIOH       65
+#define USBOTG      66
+#define MII         88
+#define WL_LED      96
+#define WL_ANT0     104
+#define WL_ANT1     105
+#define WL_BTCOEX   108
+#define WL_BTCMD    109
+#define NFC         112
+#define PWM0        160
+#define PWM1        161
+#define PWM2        162
+#define PWM3        163
+#define ETE0        164
+#define ETE1        165
+#define ETE2        166
+#define ETE3        167
+#define EGTIM       168
+#define SPI_FLASH   196
+#define SDR         200
+#define JTAG        216
+#define TRACE       217
+#define LOG_UART    220
+#define LOG_UART_IR 221
+#define SIC         224
+#define EEPROM      225
+#define DEBUG       226
+
+//Location Index(Pin Mux Selection)
+#define S0          0
+#define S1          1
+#define S2          2
+#define S3          3
+
+_LONG_CALL_ u8 
+HalPinCtrlRtl8195A(
+    IN u32  Function, 
+    IN u32  PinLocation, 
+    IN BOOL   Operation);
+#endif   //_HAL_PINMUX_

lib/fwlib/hal_platform.h

@@ -0,0 +1,102 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _HAL_PLATFORM_
+#define _HAL_PLATFORM_
+
+#define ROMVERSION 0x03
+#define ROMINFORMATION (ROMVERSION)
+
+#define SYSTEM_CLK                  PLATFORM_CLOCK
+
+#define SDR_SDRAM_BASE              0x30000000
+#define SYSTEM_CTRL_BASE            0x40000000
+#define PERI_ON_BASE                0x40000000
+#define VENDOR_REG_BASE             0x40002800
+#define SPI_FLASH_BASE              0x98000000
+#define SDR_CTRL_BASE               0x40005000
+
+#define PERIPHERAL_IRQ_STATUS       0x04
+#define PERIPHERAL_IRQ_MODE         0x08
+#define PERIPHERAL_IRQ_EN           0x0C
+#define LP_PERI_EXT_IRQ_STATUS      0x24
+#define LP_PERI_EXT_IRQ_MODE        0x28
+#define LP_PERI_EXT_IRQ_EN          0x2C
+
+#define PERIPHERAL_IRQ_ALL_LEVEL    0
+
+#define TIMER_CLK                   32*1000
+
+//3 Peripheral IP Base Address
+#define GPIO_REG_BASE               0x40001000
+#define TIMER_REG_BASE              0x40002000
+#define NFC_INTERFACE_BASE          0x40002400
+#define LOG_UART_REG_BASE           0x40003000
+#define I2C2_REG_BASE               0x40003400
+#define I2C3_REG_BASE               0x40003800
+#define SPI_FLASH_CTRL_BASE         0x40006000
+#define ADC_REG_BASE                0x40010000
+#define DAC_REG_BASE                0x40011000
+#define UART0_REG_BASE              0x40040000
+#define UART1_REG_BASE              0x40040400
+#define UART2_REG_BASE              0x40040800
+#define SPI0_REG_BASE               0x40042000
+#define SPI1_REG_BASE               0x40042400
+#define SPI2_REG_BASE               0x40042800
+#define I2C0_REG_BASE               0x40044000
+#define I2C1_REG_BASE               0x40044400
+#define SDIO_DEVICE_REG_BASE        0x40050000
+#define MII_REG_BASE                0x40050000
+#define SDIO_HOST_REG_BASE          0x40058000
+#define GDMA0_REG_BASE              0x40060000
+#define GDMA1_REG_BASE              0x40061000
+#define I2S0_REG_BASE               0x40062000
+#define I2S1_REG_BASE               0x40063000
+#define PCM0_REG_BASE               0x40064000
+#define PCM1_REG_BASE               0x40065000
+#define CRYPTO_REG_BASE             0x40070000
+#define WIFI_REG_BASE               0x40080000
+#define USB_OTG_REG_BASE            0x400C0000
+
+#define GDMA1_REG_OFF               0x1000
+#define I2S1_REG_OFF                0x1000
+#define PCM1_REG_OFF                0x1000
+#define SSI_REG_OFF                 0x400
+#define RUART_REG_OFF               0x400
+
+#define CPU_CLK_TYPE_NO             6
+
+enum _BOOT_TYPE_ {
+    BOOT_FROM_FLASH = 0,
+    BOOT_FROM_SDIO  = 1,        
+    BOOT_FROM_USB   = 2,
+    BOOT_FROM_RSVD  = 3,    
+};
+
+enum _EFUSE_CPU_CLK_ {
+    #if 1
+    CLK_200M   = 0,
+    CLK_100M   = 1,
+    CLK_50M    = 2,
+    CLK_25M    = 3,
+    CLK_12_5M  = 4,    
+    CLK_4M     = 5,
+    #else
+    CLK_25M    = 0,
+    CLK_200M   = 1,
+    CLK_100M   = 2,        
+    CLK_50M    = 3,
+    CLK_12_5M  = 4,    
+    CLK_4M     = 5,    
+    #endif
+};
+
+
+#endif //_HAL_PLATFORM_

lib/fwlib/hal_pwm.h

@@ -0,0 +1,57 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_PWM_H_
+#define _HAL_PWM_H_
+
+#define MAX_PWM_CTRL_PIN        4
+// the minimum tick time for G-timer is 61 us (clock source = 32768Hz, reload value=1 and reload takes extra 1T)
+//#define GTIMER_TICK_US            31   // micro-second, 1000000/32768 ~= 30.5
+#define MIN_GTIMER_TIMEOUT    61  // in micro-sec, use this value to set the g-timer to generate tick for PWM. 61=(1000000/32768)*2
+#define PWM_GTIMER_TICK_TIME    61  // in micro-sec, use this value to set the g-timer to generate tick for PWM. 61=(1000000/32768)*2
+
+typedef struct _HAL_PWM_ADAPTER_ {
+    u8 pwm_id;      // the PWM ID, 0~3
+    u8 sel;         // PWM Pin selection, 0~3
+    u8 gtimer_id;   // using G-Timer ID, there are 7 G-timer, but we prefer to use timer 3~6
+    u8 enable;      // is enabled
+//    u32 timer_value;    // the G-Timer auto-reload value, source clock is 32768Hz, reload will takes extra 1 tick. To set the time of a tick of PWM
+    u32 tick_time;  // the tick time for the G-timer
+    u32 period;    // the period of a PWM control cycle, in PWM tick
+    u32 pulsewidth;    // the pulse width in a period of a PWM control cycle, in PWM tick. To control the ratio
+//    float duty_ratio;   // the dyty ratio = pulswidth/period
+}HAL_PWM_ADAPTER, *PHAL_PWM_ADAPTER;
+
+
+extern HAL_Status 
+HAL_Pwm_Init(
+    u32 pwm_id,
+    u32 sel
+);
+
+extern void 
+HAL_Pwm_Enable(
+    u32 pwm_id
+);
+
+extern void 
+HAL_Pwm_Disable(
+    u32 pwm_id
+);
+
+extern void
+HAL_Pwm_SetDuty(
+    u32 pwm_id,
+    u32 period,
+    u32 pulse_width
+);
+
+
+#endif
+

lib/fwlib/hal_sdio.h

@@ -0,0 +1,252 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_SDIO_H_
+#define _HAL_SDIO_H_
+
+#include "rtl8195a_sdio.h"
+
+#if !SDIO_BOOT_DRIVER
+#include "mailbox.h"
+#endif
+#define PURE_SDIO_INIC           0  // is a pure SDIO iNIC device or a SDIO iNIC + peripheral device
+
+#if SDIO_BOOT_DRIVER
+typedef struct _HAL_SDIO_ADAPTER_ {
+	u8				*pTXBDAddr;			/* The TX_BD start address */
+	PSDIO_TX_BD		pTXBDAddrAligned;	/* The TX_BD start address, it must be 4-bytes aligned */
+	PSDIO_TX_BD_HANDLE	pTXBDHdl;		/* point to the allocated memory for TX_BD Handle array */
+	u16				TXBDWPtr;		    /* The SDIO TX(Host->Device) BD local write index, different with HW maintained write Index. */
+	u16				TXBDRPtr;		    /* The SDIO TX(Host->Device) BD read index */
+	u16				TXBDRPtrReg;		/* The SDIO TX(Host->Device) BD read index has been write to HW register */
+    u16             reserve1;
+    
+	u8				*pRXBDAddr;			/* The RX_BD start address */
+	PSDIO_RX_BD		pRXBDAddrAligned;	/* The RX_BD start address, it must be 8-bytes aligned */
+	PSDIO_RX_BD_HANDLE	pRXBDHdl;		/* point to the allocated memory for RX_BD Handle array */
+	u16				RXBDWPtr;		    /* The SDIO RX(Device->Host) BD write index */
+	u16				RXBDRPtr;		    /* The SDIO RX(Device->Host) BD local read index, different with HW maintained Read Index. */
+	u16				IntMask;			/* The Interrupt Mask */
+	u16				IntStatus;			/* The Interrupt Status */
+	u32				Events;				/* The Event to the SDIO Task */
+
+	u32				EventSema;			/* Semaphore for SDIO events, use to wakeup the SDIO task */	
+    u8              CCPWM;              /* the value write to register CCPWM, which will sync to Host HCPWM */
+    u8              reserve2;
+    u16             CCPWM2;             /* the value write to register CCPWM2, which will sync to Host HCPWM2 */
+    
+	s8              (*Tx_Callback)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize);	/* to hook the WLan driver TX callback function to handle a Packet TX */
+	VOID			*pTxCb_Adapter;		/* a pointer will be used to call the TX Callback function, 
+											which is from the TX CallBack function register */
+	s8			(*pTxCallback_Backup)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize);	// Use to back up the registered TX Callback function, for MP/Normal mode switch
+	VOID			*pTxCb_Adapter_Backup;	// Backup the pTxCb_Adapter, for MP/Normal mode switch
+	_LIST			FreeTxPktList;		/* The list to queue free Tx packets handler */
+	_LIST			RxPktList;			/* The list to queue RX packets */
+	_LIST			FreeRxPktList;		/* The list to queue free Rx packets handler */
+	SDIO_TX_PACKET	*pTxPktHandler;		/* to store allocated TX Packet handler memory address */
+	SDIO_RX_PACKET	*pRxPktHandler;		/* to store allocated RX Packet handler memory address */
+	u32				RxInQCnt;			/* The packet count for Rx In Queue */
+	u32				MemAllocCnt;		// Memory allocated count, for debug only
+	u32				MAllocFailedCnt;	// MemAlloc Failed count, for debugging
+	
+//	VOID			*pHalOp;			/* point to HAL operation function table */
+} HAL_SDIO_ADAPTER, *PHAL_SDIO_ADAPTER;
+
+extern BOOL SDIO_Device_Init_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev
+);
+extern VOID SDIO_Device_DeInit_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev
+);
+extern VOID SDIO_Send_C2H_IOMsg_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev, 
+	IN u32 *C2HMsg
+);
+extern u8 SDIO_Send_C2H_PktMsg_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev, 
+	IN u8 *C2HMsg, 
+	IN u16 MsgLen
+);
+extern VOID SDIO_Register_Tx_Callback_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev,
+	IN s8 (*Tx_Callback)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize),
+	IN VOID *pAdapter	
+);
+extern s8 SDIO_Rx_Callback_Rom(
+	IN PHAL_SDIO_ADAPTER pSDIODev,
+	IN VOID *pData,
+	IN u16 Offset,
+	IN u16 Length,
+	IN u8 CmdType
+);
+
+#else   // else of "#if SDIO_BOOT_DRIVER"
+typedef struct _HAL_SDIO_ADAPTER_ {
+//	u8				*pTxBuff;			/* point to the SDIO TX Buffer */
+//	u8				*pTxBuffAligned;	/* point to the SDIO TX Buffer with 4-bytes aligned */
+//	u32				TXFifoRPtr;		    /* The SDIO TX(Host->Device) FIFO buffer read pointer */
+
+	u8				*pTXBDAddr;			/* The TX_BD start address */
+	PSDIO_TX_BD		pTXBDAddrAligned;	/* The TX_BD start address, it must be 4-bytes aligned */
+	PSDIO_TX_BD_HANDLE	pTXBDHdl;		/* point to the allocated memory for TX_BD Handle array */
+	u16				TXBDWPtr;		    /* The SDIO TX(Host->Device) BD local write index, different with HW maintained write Index. */
+	u16				TXBDRPtr;		    /* The SDIO TX(Host->Device) BD read index */
+	u16				TXBDRPtrReg;		/* The SDIO TX(Host->Device) BD read index has been write to HW register */
+    
+	u8				*pRXBDAddr;			/* The RX_BD start address */
+	PSDIO_RX_BD		pRXBDAddrAligned;	/* The RX_BD start address, it must be 8-bytes aligned */
+	PSDIO_RX_BD_HANDLE	pRXBDHdl;		/* point to the allocated memory for RX_BD Handle array */
+	u16				RXBDWPtr;		    /* The SDIO RX(Device->Host) BD write index */
+	u16				RXBDRPtr;		    /* The SDIO RX(Device->Host) BD local read index, different with HW maintained Read Index. */
+	u16				IntMask;			/* The Interrupt Mask */
+	u16				IntStatus;			/* The Interrupt Status */
+	u32				Events;				/* The Event to the SDIO Task */
+
+    u8              CCPWM;              /* the value write to register CCPWM, which will sync to Host HCPWM */
+    u8              reserve1;
+    u16             CCPWM2;             /* the value write to register CCPWM2, which will sync to Host HCPWM2 */
+    u8              CRPWM;              /* sync from Host HRPWM */
+    u8              reserve2;
+    u16             CRPWM2;             /* sync from Host HRPWM2 */
+
+#if !TASK_SCHEDULER_DISABLED
+	_Sema			TxSema;             /* Semaphore for SDIO TX, use to wakeup the SDIO TX task */	
+    _Sema           RxSema;             /* Semaphore for SDIO RX, use to wakeup the SDIO RX task */    
+#else
+	u32				EventSema;			/* Semaphore for SDIO events, use to wakeup the SDIO task */	
+#endif
+	s8              (*Tx_Callback)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize);	/* to hook the WLan driver TX callback function to handle a Packet TX */
+	VOID			*pTxCb_Adapter;		/* a pointer will be used to call the TX Callback function, 
+											which is from the TX CallBack function register */
+	s8			(*pTxCallback_Backup)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize);	// Use to back up the registered TX Callback function, for MP/Normal mode switch
+	VOID			*pTxCb_Adapter_Backup;	// Backup the pTxCb_Adapter, for MP/Normal mode switch
+#if (CONFIG_INIC_EN == 0)
+	_LIST			FreeTxPktList;		/* The list to queue free Tx packets handler */
+	SDIO_TX_PACKET	*pTxPktHandler;		/* to store allocated TX Packet handler memory address */
+#endif
+	_LIST			RxPktList;			/* The list to queue RX packets */
+	_LIST			FreeRxPktList;		/* The list to queue free Rx packets handler */
+//	_LIST			RecyclePktList;		/* The list to queue packets handler to be recycled */
+	SDIO_RX_PACKET	*pRxPktHandler;		/* to store allocated RX Packet handler memory address */
+	_Mutex			RxMutex;			/* The Mutex to protect RxPktList */
+	u32				RxInQCnt;			/* The packet count for Rx In Queue */
+#if SDIO_DEBUG
+	_Mutex			StatisticMutex;		/* The Mutex to protect Statistic data */
+	u32				MemAllocCnt;		// Memory allocated count, for debug only
+	u32				MAllocFailedCnt;	// MemAlloc Failed count, for debugging
+#endif	
+	VOID			*pHalOp;			/* point to HAL operation function table */
+	RTL_MAILBOX		*pMBox;				/* the Mail box for other driver module can send message to SDIO driver */
+
+#ifdef PLATFORM_FREERTOS
+	xTaskHandle		xSDIOTxTaskHandle;	/* The handle of the SDIO Task for TX, can be used to delte the task */
+    xTaskHandle     xSDIORxTaskHandle;  /* The handle of the SDIO Task speical for RX, can be used to delte the task */
+#endif
+    u8              RxFifoBusy;         /* is the RX BD fetch hardware busy */
+
+#if SDIO_MP_MODE
+#if !TASK_SCHEDULER_DISABLED
+	u32				MP_Events;				/* The Event to the SDIO Task */
+	_Sema			MP_EventSema;		/* Semaphore for SDIO events, use to wakeup the SDIO task */	
+    RTL_MAILBOX     *pMP_MBox;  /* the Mail box for communication with other driver module */
+#ifdef PLATFORM_FREERTOS
+    xTaskHandle     MP_TaskHandle;      /* The handle of the MP loopback Task, can be used to delte the task */
+#endif  // end of "#ifdef PLATFORM_FREERTOS"
+#endif  // end of "#if !TASK_SCHEDULER_DISABLED"
+	// for MP mode
+    RTL_TIMER       *pPeriodTimer;      /* a timer to calculate throughput periodically */
+	u8				MP_ModeEn;			/* is in MP mode */
+	u8				MP_LoopBackEn;		/* is loop-back enabled */
+	u8				MP_ContinueTx;		/* is continue TX test enabled */
+	u8				MP_ContinueRx;		/* is continue RX test enabled */
+	u8				MP_ContinueRxMode;  /* continue RX test mode: static RX Buf, Dyna-Allocate RX Buf, Pre-Allocate RX Buf */
+	u8				MP_CRxInfinite;		/* is non-stop SDIO RX, no packet count limit */
+    u16				MP_CRxSize;		    /* SDIO RX test packet size */
+    u8              *pMP_CRxBuf;        // the buffer for continye RX test
+    u32             MP_CRxPktCnt;       /* SDIO RX test packet count */
+    u32             MP_CRxPktPendingCnt;       /* SDIO RX test packet pening count */
+	u32				MP_TxPktCnt;		/* SDIO TX packet count */
+	u32				MP_RxPktCnt;		/* SDIO RX packet count */
+	u32				MP_TxByteCnt;		/* SDIO TX Byte count */
+	u32				MP_RxByteCnt;		/* SDIO RX Byte count */
+	u32				MP_TxDropCnt;		/* SDIO TX Drop packet count */
+	u32				MP_RxDropCnt;		/* SDIO RX Drop packet count */
+
+	u32				MP_TxPktCntInPeriod;    /* SDIO TX packet count in a period */
+	u32				MP_RxPktCntInPeriod;	/* SDIO RX packet count in a period */
+	u32				MP_TxByteCntInPeriod;	/* SDIO TX Byte count in a period */
+	u32				MP_RxByteCntInPeriod;	/* SDIO RX Byte count in a period */
+
+	u32				MP_TxAvgTPWin[SDIO_AVG_TP_WIN_SIZE];        /* a window of SDIO TX byte count history, for average throughput calculation */
+	u32				MP_RxAvgTPWin[SDIO_AVG_TP_WIN_SIZE];        /* a window of SDIO RX byte count history, for average throughput calculation */
+	u32				MP_TxAvgTPWinSum;        /* The sum of all byte-count in the window */
+	u32				MP_RxAvgTPWinSum;        /* The sum of all byte-count in the window */
+    u8              OldestTxAvgWinIdx;      /* the index of the oldest TX byte count log */
+    u8              TxAvgWinCnt;            /* the number of log in the Window */
+    u8              OldestRxAvgWinIdx;      /* the index of the oldest RX byte count log */
+    u8              RxAvgWinCnt;            /* the number of log in the Window */
+
+	_LIST			MP_RxPktList;		/* The list to queue RX packets, for MP loopback test */
+#endif	// end of '#if SDIO_MP_MODE'
+} HAL_SDIO_ADAPTER, *PHAL_SDIO_ADAPTER;
+#endif  // end of "#else of "#if SDIO_BOOT_DRIVER""
+
+
+typedef struct _HAL_SDIO_OP_ {
+	BOOL (*HalSdioDevInit)(PHAL_SDIO_ADAPTER pSDIODev);	
+	VOID (*HalSdioDevDeInit)(PHAL_SDIO_ADAPTER pSDIODev);
+	VOID (*HalSdioSendC2HIOMsg)(PHAL_SDIO_ADAPTER pSDIODev, u32 *C2HMsg);
+	u8   (*HalSdioSendC2HPktMsg)(PHAL_SDIO_ADAPTER pSDIODev, u8 *C2HMsg, u16 MsgLen);
+	VOID (*HalSdioRegTxCallback)(PHAL_SDIO_ADAPTER pSDIODev,s8 (*CallbackFun)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize), VOID *pAdapter);
+	s8   (*HalSdioRxCallback)(PHAL_SDIO_ADAPTER pSDIODev, VOID *pData, u16 Offset, u16 PktSize, u8 CmdType);
+#if SDIO_MP_MODE
+	VOID (*HalSdioDevMPApp)(PHAL_SDIO_ADAPTER pSDIODev, u16 argc, u8  *argv[]);
+#endif
+}HAL_SDIO_OP, *PHAL_SDIO_OP;
+
+
+extern BOOL SDIO_Device_Init(
+	IN PHAL_SDIO_ADAPTER pSDIODev
+);
+extern VOID SDIO_Device_DeInit(
+	IN PHAL_SDIO_ADAPTER pSDIODev
+);
+extern VOID SDIO_Send_C2H_IOMsg(
+	IN PHAL_SDIO_ADAPTER pSDIODev, 
+	IN u32 *C2HMsg
+);
+extern u8 SDIO_Send_C2H_PktMsg(
+	IN PHAL_SDIO_ADAPTER pSDIODev, 
+	IN u8 *C2HMsg, 
+	IN u16 MsgLen
+);
+extern VOID SDIO_Register_Tx_Callback(
+	IN PHAL_SDIO_ADAPTER pSDIODev,
+	IN s8 (*Tx_Callback)(VOID *pAdapter, u8 *pPkt, u16 Offset, u16 PktSize),
+	IN VOID *pAdapter	
+);
+extern s8 SDIO_Rx_Callback(
+	IN PHAL_SDIO_ADAPTER pSDIODev,
+	IN VOID *pData,
+	IN u16 Offset,
+	IN u16 Length,
+	IN u8 CmdType
+);
+#if SDIO_MP_MODE
+extern VOID SDIO_DeviceMPApp(
+	IN PHAL_SDIO_ADAPTER pSDIODev,
+	IN u16 argc, 
+    IN u8  *argv[]
+);
+#endif
+
+extern PHAL_SDIO_ADAPTER pgSDIODev;
+extern VOID HalSdioInit(VOID);
+extern VOID HalSdioDeInit(VOID);
+#endif	// #ifndef _HAL_SDIO_H_

lib/fwlib/hal_sdr_controller.h

@@ -0,0 +1,188 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_SDR_CONTROLLER_H_
+#define _HAL_SDR_CONTROLLER_H_
+
+typedef enum _DRAM_TYPE_ {
+  DRAM_DDR_1 = 1,
+  DRAM_DDR_2 = 2,
+  DRAM_DDR_3 = 3,
+  DRAM_DDR_4 = 4,
+  DRAM_SDR   = 8 
+}DRAM_TYPE;
+
+typedef enum _DRAM_COLADDR_WTH_ {
+  DRAM_COLADDR_8B   = 0,
+  DRAM_COLADDR_9B   = 1,
+  DRAM_COLADDR_10B  = 2,
+  DRAM_COLADDR_11B  = 3,
+  DRAM_COLADDR_12B  = 4,
+  DRAM_COLADDR_13B  = 5,
+  DRAM_COLADDR_14B  = 6,
+  DRAM_COLADDR_15B  = 7,
+  DRAM_COLADDR_16B  = 8 
+}DRAM_COLADDR_WTH;
+
+typedef enum _DRAM_BANK_SIZE_ {
+  DRAM_BANK_2       = 0,
+  DRAM_BANK_4       = 1,
+  DRAM_BANK_8       = 2 
+}DRAM_BANK_SIZE;
+
+typedef enum _DRAM_DQ_WIDTH_ {
+  DRAM_DQ_16        = 0,
+  DRAM_DQ_32        = 1, 
+  DRAM_HALF_DQ32    = 2 
+}DRAM_DQ_WIDTH;
+
+typedef enum _MODE0_BST_LEN_ {
+  BST_LEN_4   = 0,
+  BST_LEN_FLY = 1,
+  BST_LEN_8   = 2 
+}MODE0_BST_LEN;
+
+typedef enum _MODE0_BST_TYPE_ {
+  SENQUENTIAL = 0,
+  INTERLEAVE  = 1 
+}MODE0_BST_TYPE;   
+
+typedef enum _DFI_RATIO_TYPE_ {
+  DFI_RATIO_1 = 0,  // DFI= 1:1, or SDR
+  DFI_RATIO_2 = 1, 
+  DFI_RATIO_4 = 2  
+}DFI_RATIO_TYPE;   
+
+typedef struct _DRAM_INFO_ {
+  DRAM_TYPE         DeviceType;   
+  DRAM_COLADDR_WTH  ColAddrWth;   
+  DRAM_BANK_SIZE    Bank;   
+  DRAM_DQ_WIDTH     DqWidth;
+}DRAM_INFO;
+
+typedef struct _DRAM_MODE_REG_INFO_ {
+  MODE0_BST_LEN     BstLen;
+  MODE0_BST_TYPE    BstType;
+  //enum mode0_cas         rd_cas;
+  u32 Mode0Cas;
+  u32 Mode0Wr;
+  u32 Mode1DllEnN;
+  u32 Mode1AllLat;
+  u32 Mode2Cwl;
+}DRAM_MODE_REG_INFO;
+
+typedef struct _DRAM_TIMING_INFO_ {
+  u32  TrfcPs;
+  u32  TrefiPs;
+  u32  WrMaxTck;
+  u32  TrcdPs; 
+  u32  TrpPs;
+  u32  TrasPs;
+  u32  TrrdTck;
+  u32  TwrPs;
+  u32  TwtrTck; 
+  //u32  TrtpPs;
+  u32  TmrdTck;
+  u32  TrtpTck;
+  u32  TccdTck;
+  u32  TrcPs;
+}DRAM_TIMING_INFO;
+
+
+typedef struct _DRAM_DEVICE_INFO_ {
+  DRAM_INFO          *Dev;
+  DRAM_MODE_REG_INFO *ModeReg;
+  DRAM_TIMING_INFO   *Timing;
+  u32                DdrPeriodPs;
+  DFI_RATIO_TYPE     *DfiRate; 
+}DRAM_DEVICE_INFO;
+
+
+//======================================================
+//DRAM Info
+#ifdef CONFIG_FPGA
+    #define DRAM_INFO_TYPE          DRAM_SDR
+    #define DRAM_INFO_COL_ADDR_WTH  DRAM_COLADDR_9B
+    #define DRAM_INFO_BANK_SZ       DRAM_BANK_4
+    #define DRAM_INFO_DQ_WTH        DRAM_DQ_16
+#else
+    #define DRAM_INFO_TYPE          DRAM_SDR
+    #define DRAM_INFO_COL_ADDR_WTH  DRAM_COLADDR_8B
+    #define DRAM_INFO_BANK_SZ       DRAM_BANK_2
+    #define DRAM_INFO_DQ_WTH        DRAM_DQ_16
+#endif
+
+//======================================================
+//DRAM Timing 
+#ifdef CONFIG_SDR_100MHZ
+#define DRAM_TIMING_TCK         10000       //ps
+#endif
+#ifdef CONFIG_SDR_50MHZ
+#define DRAM_TIMING_TCK         20000       //ps
+#endif
+#ifdef CONFIG_SDR_25MHZ
+#define DRAM_TIMING_TCK         40000       //ps
+#endif
+#ifdef CONFIG_SDR_12_5MHZ
+#define DRAM_TIMING_TCK         80000       //ps
+#endif
+
+#if 1
+#define DRAM_TIMING_TREF        64000       //us
+#define DRAM_ROW_NUM            8192        //depends on row bit number
+
+#define DRAM_TIMING_TRFC        60000       //ps
+#define DRAM_TIMING_TREFI       ((u32)((DRAM_TIMING_TREF*1000)/DRAM_ROW_NUM)*1000)  //ps
+#define DRAM_TIMING_TWRMAXTCK   2           //tck
+#define DRAM_TIMING_TRCD        15000       //ps
+#define DRAM_TIMING_TRP         15000       //ps
+#define DRAM_TIMING_TRAS        42000       //ps
+#define DRAM_TIMING_TRRD        2           //tck
+#define DRAM_TIMING_TWR         ((u32)(DRAM_TIMING_TCK*2))
+#define DRAM_TIMING_TWTR        0           //tck
+#define DRAM_TIMING_TMRD        2           //tck
+#define DRAM_TIMING_TRTP        0           //tck
+#define DRAM_TIMING_TCCD        1           //tck
+#define DRAM_TIMING_TRC         60000       //ps    
+#else
+
+#define DRAM_TIMING_TREF        66000       //us
+#define DRAM_ROW_NUM            8192        //depends on row bit number
+
+#define DRAM_TIMING_TRFC        66000       //ps
+#define DRAM_TIMING_TREFI       63999800
+#define DRAM_TIMING_TWRMAXTCK   2           //tck
+#define DRAM_TIMING_TRCD        15000       //ps
+#define DRAM_TIMING_TRP         15000       //ps
+#define DRAM_TIMING_TRAS        37000       //ps
+#define DRAM_TIMING_TRRD        2           //tck
+#define DRAM_TIMING_TWR         7000
+#define DRAM_TIMING_TWTR        0           //tck
+#define DRAM_TIMING_TMRD        2           //tck
+#define DRAM_TIMING_TRTP        0           //tck
+#define DRAM_TIMING_TCCD        1           //tck
+#define DRAM_TIMING_TRC         60000       //ps
+#endif
+
+#define HAL_SDR_WRITE32(addr, value32)  HAL_WRITE32(SDR_CTRL_BASE, addr, value32)
+#define HAL_SDR_WRITE16(addr, value16)  HAL_WRITE16(SDR_CTRL_BASE, addr, value16)
+#define HAL_SDR_WRITE8(addr, value8)    HAL_WRITE8(SDR_CTRL_BASE, addr, value8)
+#define HAL_SDR_READ32(addr)            HAL_READ32(SDR_CTRL_BASE, addr)
+#define HAL_SDR_READ16(addr)            HAL_READ16(SDR_CTRL_BASE, addr)
+#define HAL_SDR_READ8(addr)             HAL_READ8(SDR_CTRL_BASE, addr)
+
+#define HAL_SDRAM_WRITE32(addr, value32)  HAL_WRITE32(SDR_SDRAM_BASE, addr, value32)
+#define HAL_SDRAM_WRITE16(addr, value16)  HAL_WRITE16(SDR_SDRAM_BASE, addr, value16)
+#define HAL_SDRAM_WRITE8(addr, value8)    HAL_WRITE8(SDR_SDRAM_BASE, addr, value8)
+#define HAL_SDRAM_READ32(addr)            HAL_READ32(SDR_SDRAM_BASE, addr)
+#define HAL_SDRAM_READ16(addr)            HAL_READ16(SDR_SDRAM_BASE, addr)
+#define HAL_SDRAM_READ8(addr)             HAL_READ8(SDR_SDRAM_BASE, addr)
+
+
+#endif  // end of "#ifndef _HAL_SDR_CONTROLLER_H_"

lib/fwlib/hal_soc_ps_monitor.h

@@ -0,0 +1,278 @@
+#ifndef _HAL_SOCPWR_
+#define _HAL_SOCPWR_
+
+
+
+#define MAX_BACKUP_SIZE 129
+#define MAXFUNC     10
+#define FSTREG      0xFF
+
+#define REG_VDR_ANACK_CAL_CTRL 0xA0
+
+#define PS_MASK 0xFFFFFFFF
+
+//pwr state
+#define HWACT    0
+#define HWCG     1
+#define HWINACT  2
+#define UNDEF    3
+#define ALLMET   0xff
+
+//SLP
+#define     SLP_STIMER    BIT0
+#define     SLP_GTIMER    BIT1
+#define     SLP_GPIO      BIT2
+#define     SLP_WL        BIT3
+#define     SLP_NFC       BIT4
+#define     SLP_SDIO      BIT5
+#define     SLP_USB       BIT6
+#define     SLP_TIMER33   BIT7
+
+//DSTBY
+#define     DSTBY_STIMER  BIT0
+#define     DSTBY_NFC     BIT1
+#define     DSTBY_TIMER33 BIT2
+#define     DSTBY_GPIO    BIT3
+
+//DS wake event
+#define DS_TIMER33 BIT0
+#define DS_GPIO    BIT1
+
+enum power_state_idx{
+    ACT    = 0,
+    WFE    = 1,
+    WFI    = 2,
+    SNOOZE = 3,
+    SLPCG  = 4,
+    SLPPG  = 5,
+    DSTBY  = 6,
+    DSLP   = 7,
+    INACT  = 8,
+    MAXSTATE = 9
+};
+
+enum clk_idx{
+    ANACK = 0,
+    A33CK = 1,
+};
+
+
+typedef struct _power_state_{
+    u8  FuncIdx;
+    u8  PowerState;
+}POWER_STATE, *pPOWER_STATE;
+
+typedef struct _reg_power_state_{
+    u8  FuncIdx;
+    u8  PwrState;
+}REG_POWER_STATE, *pPREG_POWER_STATE;
+
+#if 0
+typedef struct _power_state_{
+    u8  FuncIdx;
+    u8  PowerState;
+    u32 ReqDuration;
+    u32 RegCount;
+    u32 RemainDuration;
+}POWER_STATE, *pPOWER_STATE;
+
+typedef struct _reg_power_state_{
+    u8  FuncIdx;
+    u8  PwrState;
+    u32 ReqDuration;
+    //u8 StateIdx;
+}REG_POWER_STATE, *pPREG_POWER_STATE;
+#endif
+
+typedef struct _power_mgn_{
+    u8          ActFuncCount;
+    POWER_STATE PwrState[MAXFUNC];
+    u8          CurrentState;
+    u8          SDREn;
+    u32         MSPbackup[MAX_BACKUP_SIZE];
+    u32         CPURegbackup[25];
+    u32         CPUPSP;
+    u32         WakeEventFlag;
+    BOOL        SleepFlag;
+    //u32         CPUReg[13];
+    //u32         MSBackUp[128];
+}Power_Mgn, *pPower_Mgn;
+
+typedef struct _SYS_ADAPTER_ {
+    u8      function;
+}SYS_ADAPTER, *PSYS_ADAPTER;
+
+extern Power_Mgn PwrAdapter;
+
+u8 ChangeSoCPwrState(
+    IN  u8  RequestState,
+    IN  u32 ReqCount
+);
+
+VOID PrintCPU(VOID);
+void WakeFromSLPPG(void);
+VOID SOCPSTestApp(VOID *Data);
+
+
+__inline static VOID 
+CPURegBackUp(
+    VOID
+)
+{
+#if defined (__ICCARM__)
+    // TODO: IAR has different way using assembly
+#elif defined (__GNUC__)
+	//backup cpu reg
+    #if 0
+    asm volatile
+    (
+        "PUSH {PSR, PC, LR, R12,R3,R2,R1,R0}\n"
+    );
+    #endif
+    #if 0
+    asm volatile
+    (
+        "PUSH {r0,r1,r2,r3,r4}\n"
+    );
+    #endif
+    
+    asm volatile
+    (
+
+        "MOV %0, r0\n"
+        :"=r"(PwrAdapter.CPURegbackup[0])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r1\n"
+        :"=r"(PwrAdapter.CPURegbackup[1])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r2\n"
+        :"=r"(PwrAdapter.CPURegbackup[2])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r3\n"
+        :"=r"(PwrAdapter.CPURegbackup[3])
+        ::"memory"
+    );
+    
+    asm volatile
+    (
+        "MOV %0, r4\n"
+        :"=r"(PwrAdapter.CPURegbackup[4])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r5\n"
+        :"=r"(PwrAdapter.CPURegbackup[5])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r6\n"
+        :"=r"(PwrAdapter.CPURegbackup[6])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r7\n"
+        :"=r"(PwrAdapter.CPURegbackup[7])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r8\n"
+        :"=r"(PwrAdapter.CPURegbackup[8])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r9\n"
+        :"=r"(PwrAdapter.CPURegbackup[9])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r10\n"
+        :"=r"(PwrAdapter.CPURegbackup[10])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r11\n"
+        :"=r"(PwrAdapter.CPURegbackup[11])
+        ::"memory"
+    );
+    asm volatile
+    (
+        "MOV %0, r12\n"
+        :"=r"(PwrAdapter.CPURegbackup[12])
+        ::"memory"
+    );
+
+    asm volatile
+    (
+        "MOV %0, r13\n"
+        :"=r"(PwrAdapter.CPURegbackup[13])
+        ::"memory"
+    );
+    asm volatile
+    (
+        //"MOV %0, r14\n"
+        "LDR %0, =SLPPG_WAKEUP_POINT\n"
+        "ADD %0, #1\n"
+        :"=r"(PwrAdapter.CPURegbackup[14])
+        ::"memory"
+    );
+    asm volatile
+    (
+        "LDR %0, =SLPPG_WAKEUP_POINT\n"
+        "ADD %0, #1\n"
+        :"=r"(PwrAdapter.CPURegbackup[15])
+        ::"memory"
+    );
+    asm volatile
+    (
+        "MRS %0, PSR\n"
+        :"=r"(PwrAdapter.CPURegbackup[16])
+        ::"memory"
+    );
+
+#if 1
+    asm volatile
+    (
+        "mov %0, r13\n"
+        "MOV %1, PC\n" 
+        "MRS %2, CONTROL\n"
+        "MRS %3, PSP\n" 
+        "MRS %4, MSP\n" 
+        :"=r"(PwrAdapter.CPURegbackup[24]),"=r"(PwrAdapter.CPURegbackup[23]),"=r"(PwrAdapter.CPURegbackup[22]),"=r"(PwrAdapter.CPURegbackup[21]),"=r"(PwrAdapter.CPURegbackup[20])
+        ::"memory"
+    );
+#endif
+    #ifdef CONFIG_SOC_PS_VERIFY
+    PrintCPU();
+    #endif  //#ifdef CONFIG_SOC_PS_VERIFY
+#endif //#elif defined (__GNUC__)
+}
+
+VOID RegPowerState(REG_POWER_STATE RegPwrState);
+
+#endif  //_HAL_SOCPWR_

lib/fwlib/hal_spi_flash.h

@@ -0,0 +1,254 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _HAL_SPIFLASH__
+#define _HAL_SPIFLASH__
+//======================================================
+// Header files
+
+#define SPIC_CALIBRATION_IN_NVM         1   // if store the SPIC calibration data in the NVM
+#ifndef CONFIG_IMAGE_SEPARATE       // Store SPIC Calibration only for seprated image
+#undef SPIC_CALIBRATION_IN_NVM
+#define SPIC_CALIBRATION_IN_NVM         0
+#endif
+
+//======================================================
+// Definition
+#define HAL_SPI_WRITE32(addr, value32)  HAL_WRITE32(SPI_FLASH_CTRL_BASE, addr, value32)
+#define HAL_SPI_WRITE16(addr, value16)  HAL_WRITE16(SPI_FLASH_CTRL_BASE, addr, value16)
+#define HAL_SPI_WRITE8(addr, value8)    HAL_WRITE8(SPI_FLASH_CTRL_BASE, addr, value8)
+#define HAL_SPI_READ32(addr)            HAL_READ32(SPI_FLASH_CTRL_BASE, addr)
+#define HAL_SPI_READ16(addr)            HAL_READ16(SPI_FLASH_CTRL_BASE, addr)
+#define HAL_SPI_READ8(addr)             HAL_READ8(SPI_FLASH_CTRL_BASE, addr)
+
+typedef struct _SPIC_PARA_MODE_ {
+    u8 Valid:1;         // valid
+    u8 CpuClk:3;        // CPU clock
+    u8 BitMode:2;       // Bit mode
+	u8 Reserved:2;		// reserved
+} SPIC_PARA_MODE, *PSPIC_PARA_MODE;
+
+typedef struct _SPIC_INIT_PARA_ {
+    u8  BaudRate;
+    u8  RdDummyCyle;
+    u8  DelayLine;
+    union {
+        u8  Rsvd;
+        u8  Valid;
+        SPIC_PARA_MODE Mode;
+    };
+#if defined(E_CUT_ROM_DOMAIN) || (!defined(CONFIG_RELEASE_BUILD_LIBRARIES))
+    u8 id[3];
+    u8 flashtype;
+#endif
+}SPIC_INIT_PARA, *PSPIC_INIT_PARA;
+
+
+enum _SPIC_BIT_MODE_ {
+    SpicOneBitMode = 0,
+    SpicDualBitMode = 1,
+    SpicQuadBitMode = 2,
+};
+
+//======================================================
+// Flash type used 
+#define FLASH_OTHERS 0
+#define FLASH_MXIC 1
+#define FLASH_WINBOND 2
+#define FLASH_MICRON 3
+
+#define FLASH_MXIC_MX25L4006E   1
+#define FLASH_MXIC_MX25L8073E   0
+
+// The below parts are based on the flash characteristics
+//====== Flash Command Definition  ======
+#if FLASH_MXIC_MX25L4006E
+    #define FLASH_CMD_WREN      0x06            //write enable
+    #define FLASH_CMD_WRDI      0x04            //write disable
+    #define FLASH_CMD_WRSR      0x01            //write status register
+    #define FLASH_CMD_RDID      0x9F            //read idenfication
+    #define FLASH_CMD_RDSR      0x05            //read status register
+    #define FLASH_CMD_READ      0x03            //read data
+    #define FLASH_CMD_FREAD     0x0B            //fast read data
+    #define FLASH_CMD_RDSFDP    0x5A            //Read SFDP
+    #define FLASH_CMD_RES       0xAB            //Read Electronic ID
+    #define FLASH_CMD_REMS      0x90            //Read Electronic Manufacturer & Device ID
+    #define FLASH_CMD_DREAD     0x3B            //Double Output Mode command
+    #define FLASH_CMD_SE        0x20            //Sector Erase
+    #define FLASH_CMD_BE        0xD8            //Block Erase(or 0x52)
+    #define FLASH_CMD_CE        0x60            //Chip Erase(or 0xC7)
+    #define FLASH_CMD_PP        0x02            //Page Program
+    #define FLASH_CMD_DP        0xB9            //Deep Power Down
+    #define FLASH_CMD_RDP       0xAB            //Release from Deep Power-Down
+#elif  FLASH_MXIC_MX25L8073E
+    #define FLASH_CMD_WREN      0x06            //write enable
+    #define FLASH_CMD_WRDI      0x04            //write disable
+    #define FLASH_CMD_WRSR      0x01            //write status register
+    #define FLASH_CMD_RDID      0x9F            //read idenfication
+    #define FLASH_CMD_RDSR      0x05            //read status register
+    #define FLASH_CMD_READ      0x03            //read data
+    #define FLASH_CMD_FREAD     0x0B            //fast read data
+    #define FLASH_CMD_RDSFDP    0x5A            //Read SFDP
+    #define FLASH_CMD_RES       0xAB            //Read Electronic ID
+    #define FLASH_CMD_REMS      0x90            //Read Electronic Manufacturer & Device ID
+    #define FLASH_CMD_DREAD     0x3B            //Double Output Mode command
+    #define FLASH_CMD_SE        0x20            //Sector Erase
+    #define FLASH_CMD_BE        0x52            //Block Erase
+    #define FLASH_CMD_CE        0x60            //Chip Erase(or 0xC7)
+    #define FLASH_CMD_PP        0x02            //Page Program
+    #define FLASH_CMD_DP        0xB9            //Deep Power Down
+    #define FLASH_CMD_RDP       0xAB            //Release from Deep Power-Down
+    #define FLASH_CMD_2READ     0xBB            // 2 x I/O read  command
+    #define FLASH_CMD_4READ     0xEB            // 4 x I/O read  command
+    #define FLASH_CMD_QREAD     0x6B            // 1I / 4O read command
+    #define FLASH_CMD_4PP       0x38            //quad page program
+    #define FLASH_CMD_FF        0xFF            //Release Read Enhanced
+    #define FLASH_CMD_REMS2     0xEF            // read ID for 2x I/O mode
+    #define FLASH_CMD_REMS4     0xDF            // read ID for 4x I/O mode
+    #define FLASH_CMD_ENSO      0xB1            // enter secured OTP
+    #define FLASH_CMD_EXSO      0xC1            // exit secured OTP
+    #define FLASH_CMD_RDSCUR    0x2B            // read security register
+    #define FLASH_CMD_WRSCUR    0x2F            // write security register
+#else
+    #define FLASH_CMD_WREN      0x06            //write enable
+    #define FLASH_CMD_WRDI      0x04            //write disable
+    #define FLASH_CMD_WRSR      0x01            //write status register
+    #define FLASH_CMD_RDID      0x9F            //read idenfication
+    #define FLASH_CMD_RDSR      0x05            //read status register
+    #define FLASH_CMD_READ      0x03            //read data
+    #define FLASH_CMD_FREAD     0x0B            //fast read data
+    #define FLASH_CMD_RDSFDP    0x5A            //Read SFDP
+    #define FLASH_CMD_RES       0xAB            //Read Electronic ID
+    #define FLASH_CMD_REMS      0x90            //Read Electronic Manufacturer & Device ID
+    #define FLASH_CMD_DREAD     0x3B            //Double Output Mode command
+    #define FLASH_CMD_SE        0x20            //Sector Erase
+    #define FLASH_CMD_BE        0x52            //Block Erase
+    #define FLASH_CMD_CE        0x60            //Chip Erase(or 0xC7)
+    #define FLASH_CMD_PP        0x02            //Page Program
+    #define FLASH_CMD_DP        0xB9            //Deep Power Down
+    #define FLASH_CMD_RDP       0xAB            //Release from Deep Power-Down
+    #define FLASH_CMD_2READ     0xBB            // 2 x I/O read  command
+    #define FLASH_CMD_4READ     0xEB            // 4 x I/O read  command
+    #define FLASH_CMD_QREAD     0x6B            // 1I / 4O read command
+    #define FLASH_CMD_4PP       0x38            //quad page program
+    #define FLASH_CMD_FF        0xFF            //Release Read Enhanced
+    #define FLASH_CMD_REMS2     0xEF            // read ID for 2x I/O mode
+    #define FLASH_CMD_REMS4     0xDF            // read ID for 4x I/O mode
+    #define FLASH_CMD_ENSO      0xB1            // enter secured OTP
+    #define FLASH_CMD_EXSO      0xC1            // exit secured OTP
+    #define FLASH_CMD_RDSCUR    0x2B            // read security register
+    #define FLASH_CMD_WRSCUR    0x2F            // write security register
+#endif //#if FLASH_MXIC_MX25L4006E
+// ============================
+
+// =====  Flash Parameter Definition  =====
+#if FLASH_MXIC_MX25L4006E
+    #define FLASH_RD_2IO_EN         0
+    #define FLASH_RD_2O_EN          1
+    #define FLASH_RD_4IO_EN         0
+    #define FLASH_RD_4O_EN          0
+    #define FLASH_WR_2IO_EN         0
+    #define FLASH_WR_2O_EN          0
+    #define FLASH_WR_4IO_EN         0
+    #define FLASH_WR_4O_EN          0    
+    
+    #define FLASH_DM_CYCLE_2O   0x08
+    #define FLASH_VLD_DUAL_CMDS (BIT_WR_BLOCKING | BIT_RD_DUAL_I)
+    #define FLASH_VLD_QUAD_CMDS (0)
+    
+#elif  FLASH_MXIC_MX25L8073E //This flash model is just for prototype, if you want to use it, 
+                             //the code MUST be rechecked according to the flash spec.
+    #define FLASH_RD_2IO_EN         1
+    #define FLASH_RD_2O_EN          0
+    #define FLASH_RD_4IO_EN         1
+    #define FLASH_RD_4O_EN          0
+    #define FLASH_WR_2IO_EN         1
+    #define FLASH_WR_2O_EN          0
+    #define FLASH_WR_4IO_EN         1
+    #define FLASH_WR_4O_EN          0                             
+    
+    #define FLASH_DM_CYCLE_2O  0x08
+    #define FLASH_DM_CYCLE_2IO 0x04
+    #define FLASH_DM_CYCLE_4O  0x08
+    #define FLASH_DM_CYCLE_4IO 0x04
+    
+    #define FLASH_VLD_DUAL_CMDS (BIT_WR_BLOCKING | BIT_RD_DUAL_IO)
+    #define FLASH_VLD_QUAD_CMDS (BIT_WR_BLOCKING | BIT_WR_QUAD_II | BIT_RD_QUAD_IO)
+#else
+    #define FLASH_RD_2IO_EN         1
+    #define FLASH_RD_2O_EN          0
+    #define FLASH_RD_4IO_EN         1
+    #define FLASH_RD_4O_EN          0
+    #define FLASH_WR_2IO_EN         1
+    #define FLASH_WR_2O_EN          0
+    #define FLASH_WR_4IO_EN         1
+    #define FLASH_WR_4O_EN          0
+    
+    #define FLASH_DM_CYCLE_2O  0x08
+    #define FLASH_DM_CYCLE_2IO 0x04
+    #define FLASH_DM_CYCLE_4O  0x08
+    #define FLASH_DM_CYCLE_4IO 0x04
+    
+    #define FLASH_VLD_DUAL_CMDS (BIT_WR_BLOCKING | BIT_RD_DUAL_IO)  
+    #define FLASH_VLD_QUAD_CMDS (BIT_WR_BLOCKING | BIT_WR_QUAD_II | BIT_RD_QUAD_IO)
+#endif
+#if 0
+//======================================================
+// Function prototype
+BOOLEAN SpicFlashInitRtl8195A(u8 SpicBitMode);
+
+_LONG_CALL_
+extern VOID SpicLoadInitParaFromClockRtl8195A(u8 CpuClkMode, u8 BaudRate, PSPIC_INIT_PARA pSpicInitPara); 
+
+// spi-flash controller initialization
+_LONG_CALL_
+extern VOID SpicInitRtl8195A(u8 InitBaudRate, u8 SpicBitMode);
+
+// wait sr[0] = 0, wait transmission done
+_LONG_CALL_
+extern VOID SpicWaitBusyDoneRtl8195A(VOID);
+
+// wait spi-flash status register[0] = 0
+//_LONG_CALL_
+//extern VOID SpicWaitWipDoneRtl8195A(SPIC_INIT_PARA SpicInitPara);
+#endif
+
+//======================================================
+// ROM Function prototype
+_LONG_CALL_ VOID SpiFlashAppV02(IN  VOID *Data);
+_LONG_CALL_ROM_ VOID SpicInitRtl8195AV02(IN  u8 InitBaudRate,IN  u8 SpicBitMode);
+
+_LONG_CALL_ROM_ VOID SpicEraseFlashRtl8195AV02(VOID);
+
+_LONG_CALL_ROM_ VOID SpicLoadInitParaFromClockRtl8195AV02(IN  u8 CpuClkMode,IN  u8 BaudRate,IN  PSPIC_INIT_PARA pSpicInitPara);
+
+
+VOID SpicBlockEraseFlashRtl8195A(IN u32 Address);
+VOID SpicSectorEraseFlashRtl8195A(IN u32 Address);
+VOID SpicDieEraseFlashRtl8195A(IN u32 Address);
+VOID SpicWriteProtectFlashRtl8195A(IN u32 Protect);
+VOID SpicWaitWipDoneRefinedRtl8195A(IN  SPIC_INIT_PARA SpicInitPara);
+VOID SpicWaitOperationDoneRtl8195A(IN SPIC_INIT_PARA SpicInitPara);
+VOID SpicRxCmdRefinedRtl8195A(IN  u8 cmd,IN  SPIC_INIT_PARA SpicInitPara);
+u8 SpicGetFlashStatusRefinedRtl8195A(IN  SPIC_INIT_PARA SpicInitPara);
+VOID SpicInitRefinedRtl8195A(IN  u8 InitBaudRate,IN  u8 SpicBitMode);
+u32 SpicWaitWipRtl8195A(VOID);
+u32 SpicOneBitCalibrationRtl8195A(IN u8 SysCpuClk);
+VOID SpicDisableRtl8195A(VOID);
+VOID SpicDeepPowerDownFlashRtl8195A(VOID);
+VOID SpicUserProgramRtl8195A(IN u8 * data, IN SPIC_INIT_PARA SpicInitPara, IN u32 addr, IN u32 * LengthInfo);
+
+#if SPIC_CALIBRATION_IN_NVM
+VOID SpicNVMCalLoad(u8 BitMode, u8 CpuClk);
+VOID SpicNVMCalLoadAll(void);
+VOID SpicNVMCalStore(u8 BitMode, u8 CpuClk);
+#endif  // #if SPIC_CALIBRATION_IN_NVM
+
+#endif //_HAL_SPIFLASH__

lib/fwlib/hal_ssi.h

@@ -0,0 +1,309 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_SSI_H_
+#define _HAL_SSI_H_
+
+#include "rtl8195a_ssi.h"
+
+/**
+ * LOG Configurations
+ */
+
+extern u32 SSI_DBG_CONFIG;
+extern uint8_t SPI0_IS_AS_SLAVE;
+
+
+#define SSI_DBG_ENTRANCE(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_ENTRANCE)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE ANSI_COLOR_GREEN __VA_ARGS__ ANSI_COLOR_RESET); \
+}while(0)
+
+#define SSI_DBG_INIT(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INIT)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INIT_V(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INIT_V)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INIT_VV(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INIT_VV)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_PINMUX(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_PINMUX)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_ENDIS(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_ENDIS)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INT(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INT)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INT_V(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INT_V)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INT_HNDLR(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INT_HNDLR)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INT_READ(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INT_READ)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_INT_WRITE(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_INT_WRITE)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_STATUS(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_STATUS)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_FIFO(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_FIFO)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_READ(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_READ)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_WRITE(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_WRITE)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+#define SSI_DBG_SLV_CTRL(...)  do {\
+    if (unlikely(SSI_DBG_CONFIG & DBG_TYPE_SLV_CTRL)) \
+        DBG_SSI_INFO(IDENT_FOUR_SPACE __VA_ARGS__); \
+}while(0)
+
+typedef enum _SSI_DBG_TYPE_LIST_ {
+    DBG_TYPE_ENTRANCE  = 1 << 0,
+    DBG_TYPE_INIT      = 1 << 1,
+    DBG_TYPE_INIT_V    = 1 << 2,
+    DBG_TYPE_INIT_VV   = 1 << 3,
+    DBG_TYPE_PINMUX    = 1 << 4,
+    DBG_TYPE_ENDIS     = 1 << 5,
+    DBG_TYPE_INT       = 1 << 6,
+    DBG_TYPE_INT_V     = 1 << 7,
+    DBG_TYPE_INT_HNDLR = 1 << 8,
+    DBG_TYPE_INT_READ  = 1 << 9,
+    DBG_TYPE_INT_WRITE = 1 << 10,
+    DBG_TYPE_STATUS    = 1 << 11,
+    DBG_TYPE_FIFO      = 1 << 12,
+    DBG_TYPE_READ      = 1 << 13,
+    DBG_TYPE_WRITE     = 1 << 14,
+    DBG_TYPE_SLV_CTRL  = 1 << 15
+} SSI_DBG_TYPE_LIST, *PSSI_DBG_TYPE_LIST;
+
+ typedef struct _SSI_DMA_CONFIG_ {
+    VOID *pHalGdmaOp;
+    VOID *pTxHalGdmaAdapter;
+    VOID *pRxHalGdmaAdapter;
+    u8    RxDmaBurstSize;
+    u8    TxDmaBurstSize;
+    u8    RxDmaEnable;
+    u8    TxDmaEnable;
+    IRQ_HANDLE RxGdmaIrqHandle;
+    IRQ_HANDLE TxGdmaIrqHandle;
+}SSI_DMA_CONFIG, *PSSI_DMA_CONFIG;
+
+/**
+ * DesignWare SSI Configurations
+ */
+typedef struct _HAL_SSI_ADAPTOR_ {
+    SSI_DMA_CONFIG DmaConfig;
+    IRQ_HANDLE IrqHandle;
+    //
+    VOID (*RxCompCallback)(VOID *Para);
+    VOID *RxCompCbPara;
+    VOID *RxData;
+    VOID (*TxCompCallback)(VOID *Para);
+    VOID *TxCompCbPara;
+    VOID *TxData;
+    u32  DmaRxDataLevel;
+    u32  DmaTxDataLevel;
+    u32  InterruptPriority;
+    u32  RxLength;
+    u32  RxLengthRemainder;
+    u32  RxThresholdLevel;
+    u32  TxLength;
+    u32  TxThresholdLevel;
+    u32  SlaveSelectEnable;
+    //
+    u16  ClockDivider;
+    u16  DataFrameNumber;
+    //
+    u8   ControlFrameSize;
+    u8   DataFrameFormat;
+    u8   DataFrameSize;
+    u8   DmaControl;
+    u8   Index;
+    u8   InterruptMask;
+    u8   MicrowireDirection;
+    u8   MicrowireHandshaking;
+    u8   MicrowireTransferMode;
+    u8   PinmuxSelect;
+    u8   Role;
+    u8   SclkPhase;
+    u8   SclkPolarity;
+    u8   SlaveOutputEnable;
+    u8   TransferMode;
+    u8   TransferMechanism;
+
+    // Extend
+    u32 Reserved1;
+    u8 DefaultRxThresholdLevel;
+}HAL_SSI_ADAPTOR, *PHAL_SSI_ADAPTOR;
+
+typedef struct _HAL_SSI_OP_{
+    HAL_Status (*HalSsiPinmuxEnable)(VOID *Adaptor);
+    HAL_Status (*HalSsiPinmuxDisable)(VOID *Adaptor);
+    HAL_Status (*HalSsiEnable)(VOID *Adaptor);
+    HAL_Status (*HalSsiDisable)(VOID *Adaptor);
+    HAL_Status (*HalSsiInit)(VOID *Adaptor);
+    HAL_Status (*HalSsiSetSclkPolarity)(VOID *Adaptor);
+    HAL_Status (*HalSsiSetSclkPhase)(VOID *Adaptor);
+    HAL_Status (*HalSsiWrite)(VOID *Adaptor, u32 value);
+    HAL_Status (*HalSsiLoadSetting)(VOID *Adaptor, VOID *Setting);
+    HAL_Status (*HalSsiSetInterruptMask)(VOID *Adaptor);
+    HAL_Status (*HalSsiSetDeviceRole)(VOID *Adaptor, u32 Role);
+    HAL_Status (*HalSsiInterruptEnable)(VOID *Adaptor);
+    HAL_Status (*HalSsiInterruptDisable)(VOID *Adaptor);
+    HAL_Status (*HalSsiReadInterrupt)(VOID *Adaptor, VOID *RxData, u32 Length);
+    HAL_Status (*HalSsiSetRxFifoThresholdLevel)(VOID *Adaptor);
+    HAL_Status (*HalSsiSetTxFifoThresholdLevel)(VOID *Adaptor);
+    HAL_Status (*HalSsiWriteInterrupt)(VOID *Adaptor, u8 *TxData, u32 Length);
+    HAL_Status (*HalSsiSetSlaveEnableRegister)(VOID *Adaptor, u32 SlaveIndex);
+    u32  (*HalSsiBusy)(VOID *Adaptor);
+    u32  (*HalSsiReadable)(VOID *Adaptor);
+    u32  (*HalSsiWriteable)(VOID *Adaptor);
+    u32  (*HalSsiGetInterruptMask)(VOID *Adaptor);
+    u32  (*HalSsiGetRxFifoLevel)(VOID *Adaptor);
+    u32  (*HalSsiGetTxFifoLevel)(VOID *Adaptor);
+    u32  (*HalSsiGetStatus)(VOID *Adaptor);
+    u32  (*HalSsiGetInterruptStatus)(VOID *Adaptor);
+    u32  (*HalSsiRead)(VOID *Adaptor);
+    u32  (*HalSsiGetRawInterruptStatus)(VOID *Adaptor);
+    u32  (*HalSsiGetSlaveEnableRegister)(VOID *Adaptor);
+}HAL_SSI_OP, *PHAL_SSI_OP;
+
+typedef struct _DW_SSI_DEFAULT_SETTING_ {
+    VOID (*RxCompCallback)(VOID *Para);
+    VOID *RxCompCbPara;
+    VOID *RxData;
+    VOID (*TxCompCallback)(VOID *Para);
+    VOID *TxCompCbPara;
+    VOID *TxData;
+    u32  DmaRxDataLevel;
+    u32  DmaTxDataLevel;
+    u32  InterruptPriority;
+    u32  RxLength;
+    u32  RxLengthRemainder;
+    u32  RxThresholdLevel;
+    u32  TxLength;
+    u32  TxThresholdLevel;
+    u32  SlaveSelectEnable;
+    //
+    u16  ClockDivider;
+    u16  DataFrameNumber;
+    //
+    u8   ControlFrameSize;
+    u8   DataFrameFormat;
+    u8   DataFrameSize;
+    u8   DmaControl;
+    //u8   Index;
+    u8   InterruptMask;
+    u8   MicrowireDirection;
+    u8   MicrowireHandshaking;
+    u8   MicrowireTransferMode;
+    //u8   PinmuxSelect;
+    //u8   Role;
+    u8   SclkPhase;
+    u8   SclkPolarity;
+    u8   SlaveOutputEnable;
+    u8   TransferMode;
+    u8   TransferMechanism;
+} DW_SSI_DEFAULT_SETTING, *PDW_SSI_DEFAULT_SETTING;
+
+
+struct spi_s {
+    HAL_SSI_ADAPTOR spi_adp;
+    HAL_SSI_OP      spi_op;
+    u32 irq_handler;
+    u32 irq_id;
+    u32 dma_en;
+    u32 state;
+    u8 sclk;
+#ifdef CONFIG_GDMA_EN    
+    HAL_GDMA_ADAPTER spi_gdma_adp_tx;
+    HAL_GDMA_ADAPTER spi_gdma_adp_rx;
+#endif    
+};
+
+VOID HalSsiOpInit(VOID *Adaptor);
+static __inline__ VOID HalSsiSetSclk(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter,
+    IN u32 ClkRate)
+{
+    HalSsiSetSclkRtl8195a((VOID*)pHalSsiAdapter, ClkRate);
+}
+
+HAL_Status HalSsiInit(VOID * Data);
+HAL_Status HalSsiDeInit(VOID * Data);
+HAL_Status HalSsiEnable(VOID * Data);
+HAL_Status HalSsiDisable(VOID * Data);
+
+
+#ifdef CONFIG_GDMA_EN    
+HAL_Status HalSsiTxGdmaInit(PHAL_SSI_OP pHalSsiOp, PHAL_SSI_ADAPTOR pHalSsiAdapter);
+VOID HalSsiTxGdmaDeInit(PHAL_SSI_ADAPTOR pHalSsiAdapter);
+HAL_Status HalSsiRxGdmaInit(PHAL_SSI_OP pHalSsiOp, PHAL_SSI_ADAPTOR pHalSsiAdapter);
+VOID HalSsiRxGdmaDeInit(PHAL_SSI_ADAPTOR pHalSsiAdapter);
+
+static __inline__ VOID
+HalSsiDmaInit(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    HalSsiDmaInitRtl8195a((void *)pHalSsiAdapter);
+}
+
+static __inline__ HAL_Status HalSsiDmaSend(VOID *Adapter, u8 *pTxData, u32 Length)
+{
+    return (HalSsiDmaSendRtl8195a(Adapter, pTxData, Length));
+}
+
+static __inline__ HAL_Status HalSsiDmaRecv(VOID *Adapter, u8  *pRxData, u32 Length)
+{
+    return (HalSsiDmaRecvRtl8195a(Adapter, pRxData, Length));
+}
+    
+
+#endif  // end of "#ifdef CONFIG_GDMA_EN"
+
+#endif
+

lib/fwlib/hal_timer.h

@@ -0,0 +1,58 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_TIMER_H_
+#define _HAL_TIMER_H_
+#include "basic_types.h"
+#include "hal_platform.h"
+#include "rtl8195a_timer.h"
+
+#define GTIMER_CLK_HZ           (32768)
+#define GTIMER_TICK_US          (1000000/GTIMER_CLK_HZ)
+
+typedef enum _TIMER_MODE_ {
+    FREE_RUN_MODE = 0,
+    USER_DEFINED = 1
+}TIMER_MODE, *PTIMER_MODE;
+
+
+typedef struct _TIMER_ADAPTER_ {
+
+    u32         TimerLoadValueUs;
+    u32         TimerIrqPriority;
+    TIMER_MODE  TimerMode;
+    IRQ_HANDLE  IrqHandle;
+    u8          TimerId;    
+    u8          IrqDis;
+
+}TIMER_ADAPTER, *PTIMER_ADAPTER;
+
+
+typedef struct _HAL_TIMER_OP_ {
+    u32  (*HalGetTimerId)(u32 *TimerId);
+    BOOL (*HalTimerInit)(VOID *Data);
+    u32  (*HalTimerReadCount)(u32 TimerId);
+    VOID (*HalTimerIrqClear)(u32 TimerId);
+    VOID (*HalTimerDis)(u32 TimerId);
+    VOID (*HalTimerEn)(u32 TimerId);
+    VOID (*HalTimerDumpReg)(u32 TimerId);
+}HAL_TIMER_OP, *PHAL_TIMER_OP;
+
+VOID HalTimerOpInit_Patch(
+    IN  VOID *Data
+);
+
+
+//======================================================
+// ROM Function prototype
+_LONG_CALL_ VOID HalTimerOpInitV02(IN  VOID *Data);
+
+//pvxx #define HalTimerOpInit      HalTimerOpInit_Patch
+
+#endif

lib/fwlib/hal_uart.h

@@ -0,0 +1,204 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_UART_H_
+#define _HAL_UART_H_
+
+#include "rtl8195a_uart.h"
+
+/**
+ * RUART Configurations
+ */
+#define UART_WAIT_FOREVER       0xffffffff
+
+typedef struct _UART_DMA_CONFIG_ {
+    u8 TxDmaEnable;
+    u8 RxDmaEnable;
+    u8 TxDmaBurstSize;
+    u8 RxDmaBurstSize;
+    VOID *pHalGdmaOp;
+    VOID *pTxHalGdmaAdapter;
+    VOID *pRxHalGdmaAdapter;
+    IRQ_HANDLE TxGdmaIrqHandle;
+    IRQ_HANDLE RxGdmaIrqHandle;
+}UART_DMA_CONFIG, *PUART_DMA_CONFIG;
+
+typedef struct _HAL_RUART_ADAPTER_ {
+    u32 BaudRate;
+    u32 FlowControl;
+    u32 FifoControl;
+    u32 Interrupts;
+    u32 TxCount;     // how many byte to TX
+    u32 RxCount;     // how many bytes to RX
+    u8 *pTxBuf;
+    u8 *pRxBuf;
+    HAL_UART_State State;       // UART state
+    u8 Status;      // Transfer Status
+    u8 Locked;      // is UART locked for operation
+    u8 UartIndex;
+    u8 WordLen;     // word length select: 0 -> 7 bits, 1 -> 8 bits
+    u8 StopBit;     // word length select: 0 -> 1 stop bit, 1 -> 2 stop bit
+    u8 Parity;      // parity check enable
+    u8 ParityType;  // parity check type
+    u8 StickParity;
+    u8 ModemStatus; // the modem status
+    u8 DmaEnable;
+    u8 TestCaseNumber;
+    u8 PinmuxSelect;
+    BOOL PullMode;
+    IRQ_HANDLE IrqHandle;
+    PUART_DMA_CONFIG DmaConfig;
+    VOID (*ModemStatusInd)(VOID *pAdapter);    // modem status indication interrupt handler
+    VOID (*TxTDCallback)(VOID *pAdapter);      // User Tx Done callback function
+    VOID (*RxDRCallback)(VOID *pAdapter);      // User Rx Data ready callback function
+    VOID (*TxCompCallback)(VOID *para);    // User Tx complete callback function
+    VOID (*RxCompCallback)(VOID *para);    // User Rx complete callback function
+    VOID *TxTDCbPara;   // the pointer agrument for TxTDCallback
+    VOID *RxDRCbPara;   // the pointer agrument for RxDRCallback
+    VOID *TxCompCbPara; // the pointer argument for TxCompCbPara
+    VOID *RxCompCbPara; // the pointer argument for RxCompCallback
+    VOID (*EnterCritical)(void);
+    VOID (*ExitCritical)(void);
+
+    //1 New member only can be added below: members above must be fixed for ROM code
+    u32 *pDefaultBaudRateTbl;      // point to the table of pre-defined baud rate
+    u8 *pDefaultOvsrRTbl;         // point to the table of OVSR for pre-defined baud rate
+    u16 *pDefaultDivTbl;           // point to the table of DIV for pre-defined baud rate
+    u8  *pDefOvsrAdjBitTbl_10;     // point to the table of OVSR-Adj bits for 10 bits
+    u8  *pDefOvsrAdjBitTbl_9;     // point to the table of OVSR-Adj bits for 9 bits
+    u8  *pDefOvsrAdjBitTbl_8;     // point to the table of OVSR-Adj bits for 8 bits
+    u16 *pDefOvsrAdjTbl_10;       // point to the table of OVSR-Adj for pre-defined baud rate
+    u16 *pDefOvsrAdjTbl_9;       // point to the table of OVSR-Adj for pre-defined baud rate
+    u16 *pDefOvsrAdjTbl_8;       // point to the table of OVSR-Adj for pre-defined baud rate
+    u32 BaudRateUsing;             // Current using Baud-Rate    
+
+#if CONFIG_CHIP_E_CUT
+    u8  TxState;
+    u8  RxState;
+    u32 TxInitSize;     // how many byte to TX at atart
+    u32 RxInitSize;     // how many bytes to RX at start
+
+    VOID (*RuartEnterCritical)(VOID *para);   // enter critical: disable UART interrupt
+    VOID (*RuartExitCritical)(VOID *para);    // exit critical: re-enable UART interrupt
+    VOID (*TaskYield)(VOID *para);    // User Task Yield: do a context switch while waitting
+    VOID *TaskYieldPara;   // the agrument (pointer) for TaskYield
+#endif    // #if CONFIG_CHIP_E_CUT
+}HAL_RUART_ADAPTER, *PHAL_RUART_ADAPTER;
+
+typedef struct _HAL_RUART_OP_ {
+    VOID (*HalRuartAdapterLoadDef)(VOID *pAdp, u8 UartIdx);    // Load UART adapter default setting
+    VOID (*HalRuartTxGdmaLoadDef)(VOID *pAdp, VOID *pCfg);     // Load TX GDMA default setting
+    VOID (*HalRuartRxGdmaLoadDef)(VOID *pAdp, VOID *pCfg);     // Load RX GDMA default setting
+    HAL_Status (*HalRuartResetRxFifo)(VOID *Data);
+    HAL_Status (*HalRuartInit)(VOID *Data);
+    VOID (*HalRuartDeInit)(VOID *Data);
+    HAL_Status (*HalRuartPutC)(VOID *Data, u8 TxData);
+    u32  (*HalRuartSend)(VOID *Data, u8 *pTxData, u32 Length, u32 Timeout);
+    HAL_Status  (*HalRuartIntSend)(VOID *Data, u8 *pTxData, u32 Length);
+    HAL_Status  (*HalRuartDmaSend)(VOID *Data, u8 *pTxData, u32 Length);
+    HAL_Status  (*HalRuartStopSend)(VOID *Data);
+    HAL_Status (*HalRuartGetC)(VOID *Data, u8 *pRxByte);
+    u32  (*HalRuartRecv)(VOID *Data, u8  *pRxData, u32 Length, u32 Timeout);
+    HAL_Status  (*HalRuartIntRecv)(VOID *Data, u8  *pRxData, u32 Length);
+    HAL_Status  (*HalRuartDmaRecv)(VOID *Data, u8  *pRxData, u32 Length);
+    HAL_Status  (*HalRuartStopRecv)(VOID *Data);
+    u8   (*HalRuartGetIMR)(VOID *Data);
+    VOID (*HalRuartSetIMR)(VOID *Data);
+    u32  (*HalRuartGetDebugValue)(VOID *Data, u32 DbgSel);
+    VOID (*HalRuartDmaInit)(VOID *Data);
+    VOID (*HalRuartRTSCtrl)(VOID *Data, BOOLEAN RtsCtrl);
+    VOID (*HalRuartRegIrq)(VOID *Data);
+    VOID (*HalRuartIntEnable)(VOID *Data);
+    VOID (*HalRuartIntDisable)(VOID *Data);
+}HAL_RUART_OP, *PHAL_RUART_OP;
+
+typedef struct _RUART_DATA_ {
+    PHAL_RUART_ADAPTER pHalRuartAdapter;
+    BOOL PullMode;
+    u8   BinaryData;
+    u8   SendBuffer;
+    u8   RecvBuffer;
+}RUART_DATA, *PRUART_DATA;
+
+typedef struct _RUART_ADAPTER_ {
+    PHAL_RUART_OP      pHalRuartOp;
+    PHAL_RUART_ADAPTER pHalRuartAdapter;
+    PUART_DMA_CONFIG   pHalRuartDmaCfg;
+}RUART_ADAPTER, *PRUART_ADAPTER;
+
+extern VOID
+HalRuartOpInit(
+        IN VOID *Data
+);
+
+extern HAL_Status
+HalRuartTxGdmaInit(
+    PHAL_RUART_OP pHalRuartOp,
+    PHAL_RUART_ADAPTER pHalRuartAdapter,
+    PUART_DMA_CONFIG pUartGdmaConfig
+);
+
+extern VOID
+HalRuartTxGdmaDeInit(
+    PUART_DMA_CONFIG pUartGdmaConfig
+);
+
+extern HAL_Status
+HalRuartRxGdmaInit(
+    PHAL_RUART_OP pHalRuartOp,
+    PHAL_RUART_ADAPTER pHalRuartAdapter,
+    PUART_DMA_CONFIG pUartGdmaConfig
+);
+
+extern VOID
+HalRuartRxGdmaDeInit(
+    PUART_DMA_CONFIG pUartGdmaConfig
+);
+
+extern HAL_Status
+HalRuartResetTxFifo(
+    VOID *Data
+);
+
+extern HAL_Status 
+HalRuartSetBaudRate(
+        IN VOID *Data
+);
+
+extern HAL_Status 
+HalRuartInit(
+    IN VOID *Data
+);
+
+extern VOID
+HalRuartDeInit(
+    IN VOID *Data
+);
+
+extern HAL_Status 
+HalRuartDisable(
+    IN VOID *Data
+);
+
+extern HAL_Status 
+HalRuartEnable(
+    IN VOID *Data
+);
+
+HAL_Status 
+HalRuartFlowCtrl(
+    IN VOID *Data
+);
+
+extern const HAL_RUART_OP _HalRuartOp;
+extern HAL_Status RuartLock (PHAL_RUART_ADAPTER pHalRuartAdapter);
+extern VOID RuartUnLock (PHAL_RUART_ADAPTER pHalRuartAdapter);
+
+#endif
+

lib/fwlib/hal_usb.h

@@ -0,0 +1,15 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_USB_H_
+#define _HAL_USB_H_
+
+#include "rtl8195a_usb.h"
+
+#endif //_HAL_USB_H_

lib/fwlib/hal_util.h

@@ -0,0 +1,252 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#ifndef _HAL_UTIL_H_
+#define _HAL_UTIL_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+struct LIST_HEADER {
+	struct LIST_HEADER *Next, *Prev;
+};
+
+typedef struct  LIST_HEADER     _LIST;
+
+//#define RTL_LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define RTL_INIT_LIST_HEAD(ptr) do { \
+	(ptr)->Next = (ptr); (ptr)->Prev = (ptr); \
+} while (0)
+
+
+/*
+ * Insert a new entry between two known consecutive entries. 
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+ static __inline__ VOID 
+ __List_Add(
+    IN  struct LIST_HEADER * New,
+    IN  struct LIST_HEADER * Prev,
+    IN  struct LIST_HEADER * Next
+)
+{
+	Next->Prev = New;
+	New->Next = Next;
+	New->Prev = Prev;
+	Prev->Next = New;
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+ static __inline__ VOID
+ __List_Del(
+    IN  struct LIST_HEADER * Prev,
+    IN  struct LIST_HEADER * Next
+ )
+{
+	Next->Prev = Prev;
+	Prev->Next = Next;
+}
+
+/**
+ * ListDel - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is in an undefined state.
+ */
+static __inline__ VOID 
+ListDel(
+    IN  struct LIST_HEADER *Entry
+)
+{
+	__List_Del(Entry->Prev, Entry->Next);
+}
+
+/**
+ * ListDelInit - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static  __inline__ VOID
+ListDelInit(
+    IN  struct LIST_HEADER *Entry
+)
+{
+	__List_Del(Entry->Prev, Entry->Next);
+	RTL_INIT_LIST_HEAD(Entry);
+
+}
+
+/**
+ * ListEmpty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static __inline__ u32 
+ListEmpty(
+    IN  struct LIST_HEADER *Head
+)
+{
+	return Head->Next == Head;
+}
+
+/**
+ * ListSplice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static __inline__ VOID 
+ListSplice(
+    IN  struct LIST_HEADER *List,
+    IN  struct LIST_HEADER *Head
+)
+{
+	struct LIST_HEADER *First = List->Next;
+
+	if (First != List) {
+		struct LIST_HEADER *Last = List->Prev;
+		struct LIST_HEADER *At = Head->Next;
+
+		First->Prev = Head;
+		Head->Next = First;
+
+		Last->Next = At;
+		At->Prev = Last;
+	}
+}
+
+static __inline__ VOID 
+ListAdd(
+    IN  struct LIST_HEADER *New, 
+    IN  struct LIST_HEADER *head
+)
+{
+	__List_Add(New, head, head->Next);
+}
+
+
+static __inline__ VOID 
+ListAddTail(
+    IN  struct LIST_HEADER *New, 
+    IN  struct LIST_HEADER *head
+)
+{
+	__List_Add(New, head->Prev, head);
+}
+
+static __inline VOID 
+RtlInitListhead(
+    IN  _LIST *list
+)
+{
+    RTL_INIT_LIST_HEAD(list);
+}
+
+
+/*
+For the following list_xxx operations, 
+caller must guarantee the atomic context.
+Otherwise, there will be racing condition.
+*/
+static __inline u32	
+RtlIsListEmpty(
+    IN  _LIST *phead
+)
+{
+
+	if (ListEmpty(phead))
+		return _TRUE;
+	else
+		return _FALSE;
+	
+}
+
+static __inline VOID 
+RtlListInsertHead(
+    IN  _LIST *plist,
+    IN  _LIST *phead
+)
+{
+	ListAdd(plist, phead);
+}
+
+static __inline VOID 
+RtlListInsertTail(
+    IN  _LIST *plist,
+    IN  _LIST *phead
+)
+{
+	ListAddTail(plist, phead);	
+}
+
+
+static __inline _LIST
+*RtlListGetNext(
+    IN  _LIST *plist
+)
+{
+	return plist->Next;
+}
+
+static __inline VOID 
+RtlListDelete(
+    IN _LIST *plist
+)
+{
+	ListDelInit(plist);
+}
+
+#define RTL_LIST_CONTAINOR(ptr, type, member) \
+        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))
+        
+#ifndef CONTAINER_OF
+#define CONTAINER_OF(ptr, type, member) \
+        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))
+#endif
+/*
+#define list_entry(ptr, type, member) \
+ 		CONTAINER_OF(ptr, type, member)
+
+#define list_first_entry(ptr, type, member) \
+        list_entry((ptr)->Next, type, member) 		
+
+#define list_next_entry(pos, member, type) \
+        list_entry((pos)->member.Next, type, member)
+
+#define list_for_each_entry(pos, head, member, type) \
+        for (pos = list_first_entry(head, type, member); \
+             &pos->member != (head); \
+             pos = list_next_entry(pos, member, type))
+#define list_for_each(pos, head) \
+        for (pos = (head)->Next; pos != (head); pos = pos->Next)
+*/
+
+#ifndef BIT
+	#define BIT(x)	( 1 << (x))
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif //_HAL_UTIL_H_

lib/fwlib/hal_vector_table.h

@@ -0,0 +1,53 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _HAL_VECTOR_TABLE_H_
+#define _HAL_VECTOR_TABLE_H_
+
+
+
+
+extern _LONG_CALL_ROM_ VOID
+VectorTableInitRtl8195A(
+    IN  u32 StackP
+);
+
+extern _LONG_CALL_ROM_ VOID
+VectorTableInitForOSRtl8195A(
+    IN  VOID *PortSVC,
+    IN  VOID *PortPendSVH,
+    IN  VOID *PortSysTick    
+);
+
+extern _LONG_CALL_ROM_ BOOL
+VectorIrqRegisterRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+);
+
+extern _LONG_CALL_ROM_ BOOL
+VectorIrqUnRegisterRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+);
+
+
+extern _LONG_CALL_ROM_ VOID
+VectorIrqEnRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+);
+
+extern _LONG_CALL_ROM_ VOID
+VectorIrqDisRtl8195A(
+    IN  PIRQ_HANDLE pIrqHandle
+);
+
+ 
+extern _LONG_CALL_ROM_ VOID
+HalPeripheralIntrHandle(VOID);
+#endif //_HAL_VECTOR_TABLE_H_

lib/fwlib/ram_lib/usb_otg/include/Rtl8195a_otg_zero.h

@@ -0,0 +1,35 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef RTL8195A_OTG_ZERO_H
+#define RTL8195A_OTG_ZERO_H
+
+#include "usb_ch9.h"
+#include "usb_gadget.h"
+
+struct zero_dev {
+	//ModifiedByJD    spinlock_t		lock;
+	struct usb_gadget	*gadget;
+	struct usb_request	*req;		/* for control responses */
+
+	/* when configured, we have one of two configs:
+	 * - source data (in to host) and sink it (out from host)
+	 * - or loop it back (out from host back in to host)
+	 */
+	u8			config;
+	struct usb_ep		*in_ep, *out_ep, *status_ep;//ModifiedByJD    
+
+    const struct usb_endpoint_descriptor
+				*in, *out, *status;                 //ModifiedByJD    
+	/* autoresume timer */
+	//ModifiedByJD    struct timer_list	resume;
+};
+
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/cdc.h

@@ -0,0 +1,211 @@
+
+//#include "../otg/osk/sys-support.h" //ModifiedByJD    
+
+/*
+ * USB Communications Device Class (CDC) definitions
+ *
+ * CDC says how to talk to lots of different types of network adapters,
+ * notably ethernet adapters and various modems.  It's used mostly with
+ * firmware based USB peripherals.
+ */
+
+#define USB_CDC_SUBCLASS_ACM			0x02
+#define USB_CDC_SUBCLASS_ETHERNET		0x06
+#define USB_CDC_SUBCLASS_WHCM			0x08
+#define USB_CDC_SUBCLASS_DMM			0x09
+#define USB_CDC_SUBCLASS_MDLM			0x0a
+#define USB_CDC_SUBCLASS_OBEX			0x0b
+
+#define USB_CDC_PROTO_NONE			0
+
+#define USB_CDC_ACM_PROTO_AT_V25TER		1
+#define USB_CDC_ACM_PROTO_AT_PCCA101		2
+#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE	3
+#define USB_CDC_ACM_PROTO_AT_GSM		4
+#define USB_CDC_ACM_PROTO_AT_3G			5
+#define USB_CDC_ACM_PROTO_AT_CDMA		6
+#define USB_CDC_ACM_PROTO_VENDOR		0xff
+
+/*-------------------------------------------------------------------------*/
+//#define UPACKED __attribute__ ((packed))
+#define UPACKED 
+/*
+ * Class-Specific descriptors ... there are a couple dozen of them
+ */
+
+#define USB_CDC_HEADER_TYPE		0x00		/* header_desc */
+#define USB_CDC_CALL_MANAGEMENT_TYPE	0x01		/* call_mgmt_descriptor */
+#define USB_CDC_ACM_TYPE		0x02		/* acm_descriptor */
+#define USB_CDC_UNION_TYPE		0x06		/* union_desc */
+#define USB_CDC_COUNTRY_TYPE		0x07
+#define USB_CDC_NETWORK_TERMINAL_TYPE	0x0a		/* network_terminal_desc */
+#define USB_CDC_ETHERNET_TYPE		0x0f		/* ether_desc */
+#define USB_CDC_WHCM_TYPE		0x11
+#define USB_CDC_MDLM_TYPE		0x12		/* mdlm_desc */
+#define USB_CDC_MDLM_DETAIL_TYPE	0x13		/* mdlm_detail_desc */
+#define USB_CDC_DMM_TYPE		0x14
+#define USB_CDC_OBEX_TYPE		0x15
+
+//ModifiedByJD    (>>>) modify the data type to useable ones.
+/* "Header Functional Descriptor" from CDC spec  5.2.3.1 */
+struct usb_cdc_header_desc {
+	u8	bLength;
+	u8	bDescriptorType;
+    u8	bDescriptorSubType;
+
+	u16	bcdCDC;
+} UPACKED;
+
+/* "Call Management Descriptor" from CDC spec  5.2.3.2 */
+struct usb_cdc_call_mgmt_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	u8	bmCapabilities;
+#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT		0x01
+#define USB_CDC_CALL_MGMT_CAP_DATA_INTF		0x02
+
+	u8	bDataInterface;
+} UPACKED;
+
+/* "Abstract Control Management Descriptor" from CDC spec  5.2.3.3 */
+struct usb_cdc_acm_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	u8	bmCapabilities;
+} UPACKED;
+
+/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
+struct usb_cdc_union_desc {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	u8	bMasterInterface0;
+	u8	bSlaveInterface0;
+	/* ... and there could be other slave interfaces */
+} UPACKED;
+
+/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */
+struct usb_cdc_network_terminal_desc {
+	u8	bLength;
+    u8	bDescriptorType;
+    u8	bDescriptorSubType;
+
+	u8	bEntityId;
+	u8	iName;
+	u8	bChannelIndex;
+	u8	bPhysicalInterface;
+} UPACKED;
+
+/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
+struct usb_cdc_ether_desc {
+	u8	bLength;
+    u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	u8	iMACAddress;
+	u32	bmEthernetStatistics;
+	u16	wMaxSegmentSize;
+	u16	wNumberMCFilters;
+	u8	bNumberPowerFilters;
+} UPACKED;
+
+/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
+struct usb_cdc_mdlm_desc {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	u16	bcdVersion;
+	u8	bGUID[16];
+}UPACKED;
+
+/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
+struct usb_cdc_mdlm_detail_desc {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubType;
+
+	/* type is associated with mdlm_desc.bGUID */
+	u8	bGuidDescriptorType;
+	u8	bDetailData[0];
+} UPACKED;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Control Requests (6.2)
+ *
+ * section 3.6.2.1 table 4 has the ACM profile, for modems.
+ * section 3.8.2 table 10 has the ethernet profile.
+ *
+ * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
+ * heavily dependent on the encapsulated (proprietary) command mechanism.
+ */
+
+#define USB_CDC_SEND_ENCAPSULATED_COMMAND	0x00
+#define USB_CDC_GET_ENCAPSULATED_RESPONSE	0x01
+#define USB_CDC_REQ_SET_LINE_CODING		0x20
+#define USB_CDC_REQ_GET_LINE_CODING		0x21
+#define USB_CDC_REQ_SET_CONTROL_LINE_STATE	0x22
+#define USB_CDC_REQ_SEND_BREAK			0x23
+#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS	0x40
+#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER	0x41
+#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER	0x42
+#define USB_CDC_SET_ETHERNET_PACKET_FILTER	0x43
+#define USB_CDC_GET_ETHERNET_STATISTIC		0x44
+
+/* Line Coding Structure from CDC spec 6.2.13 */
+struct usb_cdc_line_coding {
+	u32	dwDTERate;
+	u8	bCharFormat;
+#define USB_CDC_1_STOP_BITS			0
+#define USB_CDC_1_5_STOP_BITS			1
+#define USB_CDC_2_STOP_BITS			2
+
+	u8	bParityType;
+#define USB_CDC_NO_PARITY			0
+#define USB_CDC_ODD_PARITY			1
+#define USB_CDC_EVEN_PARITY			2
+#define USB_CDC_MARK_PARITY			3
+#define USB_CDC_SPACE_PARITY			4
+
+	u8	bDataBits;
+} UPACKED;
+
+/* table 62; bits in multicast filter */
+#define	USB_CDC_PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define	USB_CDC_PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define	USB_CDC_PACKET_TYPE_DIRECTED		(1 << 2)
+#define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
+#define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Notifications (6.3) sent by interrupt transfers
+ *
+ * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
+ * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
+ * RNDIS also defines its own bit-incompatible notifications
+ */
+
+#define USB_CDC_NOTIFY_NETWORK_CONNECTION	0x00
+#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE	0x01
+#define USB_CDC_NOTIFY_SERIAL_STATE		0x20
+#define USB_CDC_NOTIFY_SPEED_CHANGE		0x2a
+
+struct usb_cdc_notification {
+	u8	bmRequestType;
+	u8	bNotificationType;
+	u16	wValue;
+	u16	wIndex;
+	u16	wLength;
+}UPACKED;
+//ModifiedByJD    (<<<)
+

lib/fwlib/ram_lib/usb_otg/include/dwc_list.h

@@ -0,0 +1,594 @@
+/*	$OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $	*/
+/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
+
+/*
+ * Copyright (c) 1991, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
+ */
+
+#ifndef _DWC_LIST_H_
+#define _DWC_LIST_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @file
+ *
+ * This file defines linked list operations.  It is derived from BSD with
+ * only the MACRO names being prefixed with DWC_.  This is because a few of
+ * these names conflict with those on Linux.  For documentation on use, see the
+ * inline comments in the source code.  The original license for this source
+ * code applies and is preserved in the dwc_list.h source file.
+ */
+
+/*
+ * This file defines five types of data structures: singly-linked lists,
+ * lists, simple queues, tail queues, and circular queues.
+ *
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction.  Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * A list is headed by a single forward pointer (or an array of forward
+ * pointers for a hash table header). The elements are doubly linked
+ * so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before
+ * or after an existing element or at the head of the list. A list
+ * may only be traversed in the forward direction.
+ *
+ * A simple queue is headed by a pair of pointers, one the head of the
+ * list and the other to the tail of the list. The elements are singly
+ * linked to save space, so elements can only be removed from the
+ * head of the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the
+ * list. A simple queue may only be traversed in the forward direction.
+ *
+ * A tail queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or
+ * after an existing element, at the head of the list, or at the end of
+ * the list. A tail queue may be traversed in either direction.
+ *
+ * A circle queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the list.
+ * A circle queue may be traversed in either direction, but has a more
+ * complex end of list detection.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ */
+
+/*
+ * Double-linked List.
+ */
+
+typedef struct dwc_list_link {
+	struct dwc_list_link *next;
+	struct dwc_list_link *prev;
+} dwc_list_link_t;
+
+#define DWC_LIST_INIT(link) do {	\
+	(link)->next = (link);		\
+	(link)->prev = (link);		\
+} while (0)
+
+#define DWC_LIST_FIRST(link)	((link)->next)
+#define DWC_LIST_LAST(link)	((link)->prev)
+#define DWC_LIST_END(link)	(link)
+#define DWC_LIST_NEXT(link)	((link)->next)
+#define DWC_LIST_PREV(link)	((link)->prev)
+#define DWC_LIST_EMPTY(link)	\
+	(DWC_LIST_FIRST(link) == DWC_LIST_END(link))
+#define DWC_LIST_ENTRY(link, type, field)			\
+	(type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field))
+
+#if 0
+#define DWC_LIST_INSERT_HEAD(list, link) do {			\
+	(link)->next = (list)->next;				\
+	(link)->prev = (list);					\
+	(list)->next->prev = (link);				\
+	(list)->next = (link);					\
+} while (0)
+
+#define DWC_LIST_INSERT_TAIL(list, link) do {			\
+	(link)->next = (list);					\
+	(link)->prev = (list)->prev;				\
+	(list)->prev->next = (link);				\
+	(list)->prev = (link);					\
+} while (0)
+#else
+#define DWC_LIST_INSERT_HEAD(list, link) do {			\
+	dwc_list_link_t *__next__ = (list)->next;		\
+	__next__->prev = (link);				\
+	(link)->next = __next__;				\
+	(link)->prev = (list);					\
+	(list)->next = (link);					\
+} while (0)
+
+#define DWC_LIST_INSERT_TAIL(list, link) do {			\
+	dwc_list_link_t *__prev__ = (list)->prev;		\
+	(list)->prev = (link);					\
+	(link)->next = (list);					\
+	(link)->prev = __prev__;				\
+	__prev__->next = (link);				\
+} while (0)
+#endif
+
+#if 0
+static inline void __list_add(struct list_head *new,
+                              struct list_head *prev,
+                              struct list_head *next)
+{
+        next->prev = new;
+        new->next = next;
+        new->prev = prev;
+        prev->next = new;
+}
+
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+        __list_add(new, head, head->next);
+}
+
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+        __list_add(new, head->prev, head);
+}
+
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+        next->prev = prev;
+        prev->next = next;
+}
+
+static inline void list_del(struct list_head *entry)
+{
+        __list_del(entry->prev, entry->next);
+        entry->next = LIST_POISON1;
+        entry->prev = LIST_POISON2;
+}
+#endif
+
+#define DWC_LIST_REMOVE(link) do {				\
+	(link)->next->prev = (link)->prev;			\
+	(link)->prev->next = (link)->next;			\
+} while (0)
+
+#define DWC_LIST_REMOVE_INIT(link) do {				\
+	DWC_LIST_REMOVE(link);					\
+	DWC_LIST_INIT(link);					\
+} while (0)
+
+#define DWC_LIST_MOVE_HEAD(list, link) do {			\
+	DWC_LIST_REMOVE(link);					\
+	DWC_LIST_INSERT_HEAD(list, link);			\
+} while (0)
+
+#define DWC_LIST_MOVE_TAIL(list, link) do {			\
+	DWC_LIST_REMOVE(link);					\
+	DWC_LIST_INSERT_TAIL(list, link);			\
+} while (0)
+
+#define DWC_LIST_FOREACH(var, list)				\
+	for((var) = DWC_LIST_FIRST(list);			\
+	    (var) != DWC_LIST_END(list);			\
+	    (var) = DWC_LIST_NEXT(var))
+
+#define DWC_LIST_FOREACH_SAFE(var, var2, list)			\
+	for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var);	\
+	    (var) != DWC_LIST_END(list);			\
+	    (var) = (var2), (var2) = DWC_LIST_NEXT(var2))
+
+#define DWC_LIST_FOREACH_REVERSE(var, list)			\
+	for((var) = DWC_LIST_LAST(list);			\
+	    (var) != DWC_LIST_END(list);			\
+	    (var) = DWC_LIST_PREV(var))
+
+/*
+ * Singly-linked List definitions.
+ */
+#define DWC_SLIST_HEAD(name, type)					\
+struct name {								\
+	struct type *slh_first;	/* first element */			\
+}
+
+#define DWC_SLIST_HEAD_INITIALIZER(head)				\
+	{ NULL }
+
+#define DWC_SLIST_ENTRY(type)						\
+struct {								\
+	struct type *sle_next;	/* next element */			\
+}
+
+/*
+ * Singly-linked List access methods.
+ */
+#define DWC_SLIST_FIRST(head)	((head)->slh_first)
+#define DWC_SLIST_END(head)		NULL
+#define DWC_SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
+#define DWC_SLIST_NEXT(elm, field)	((elm)->field.sle_next)
+
+#define DWC_SLIST_FOREACH(var, head, field)				\
+	for((var) = SLIST_FIRST(head);					\
+	    (var) != SLIST_END(head);					\
+	    (var) = SLIST_NEXT(var, field))
+
+#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field)		\
+	for((varp) = &SLIST_FIRST((head));				\
+	    ((var) = *(varp)) != SLIST_END(head);			\
+	    (varp) = &SLIST_NEXT((var), field))
+
+/*
+ * Singly-linked List functions.
+ */
+#define DWC_SLIST_INIT(head) {						\
+	SLIST_FIRST(head) = SLIST_END(head);				\
+}
+
+#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do {		\
+	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
+	(slistelm)->field.sle_next = (elm);				\
+} while (0)
+
+#define DWC_SLIST_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.sle_next = (head)->slh_first;			\
+	(head)->slh_first = (elm);					\
+} while (0)
+
+#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do {			\
+	(elm)->field.sle_next = (elm)->field.sle_next->field.sle_next;	\
+} while (0)
+
+#define DWC_SLIST_REMOVE_HEAD(head, field) do {				\
+	(head)->slh_first = (head)->slh_first->field.sle_next;		\
+} while (0)
+
+#define DWC_SLIST_REMOVE(head, elm, type, field) do {			\
+	if ((head)->slh_first == (elm)) {				\
+		SLIST_REMOVE_HEAD((head), field);			\
+	}								\
+	else {								\
+		struct type *curelm = (head)->slh_first;		\
+		while( curelm->field.sle_next != (elm) )		\
+			curelm = curelm->field.sle_next;		\
+		curelm->field.sle_next =				\
+		    curelm->field.sle_next->field.sle_next;		\
+	}								\
+} while (0)
+
+/*
+ * Simple queue definitions.
+ */
+#define DWC_SIMPLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *sqh_first;	/* first element */			\
+	struct type **sqh_last;	/* addr of last next element */		\
+}
+
+#define DWC_SIMPLEQ_HEAD_INITIALIZER(head)				\
+	{ NULL, &(head).sqh_first }
+
+#define DWC_SIMPLEQ_ENTRY(type)						\
+struct {								\
+	struct type *sqe_next;	/* next element */			\
+}
+
+/*
+ * Simple queue access methods.
+ */
+#define DWC_SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
+#define DWC_SIMPLEQ_END(head)	    NULL
+#define DWC_SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
+#define DWC_SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
+
+#define DWC_SIMPLEQ_FOREACH(var, head, field)				\
+	for((var) = SIMPLEQ_FIRST(head);				\
+	    (var) != SIMPLEQ_END(head);					\
+	    (var) = SIMPLEQ_NEXT(var, field))
+
+/*
+ * Simple queue functions.
+ */
+#define DWC_SIMPLEQ_INIT(head) do {					\
+	(head)->sqh_first = NULL;					\
+	(head)->sqh_last = &(head)->sqh_first;				\
+} while (0)
+
+#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(head)->sqh_first = (elm);					\
+} while (0)
+
+#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.sqe_next = NULL;					\
+	*(head)->sqh_last = (elm);					\
+	(head)->sqh_last = &(elm)->field.sqe_next;			\
+} while (0)
+
+#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
+	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(listelm)->field.sqe_next = (elm);				\
+} while (0)
+
+#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do {			\
+	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
+		(head)->sqh_last = &(head)->sqh_first;			\
+} while (0)
+
+/*
+ * Tail queue definitions.
+ */
+#define DWC_TAILQ_HEAD(name, type)					\
+struct name {								\
+	struct type *tqh_first;	/* first element */			\
+	struct type **tqh_last;	/* addr of last next element */		\
+}
+
+#define DWC_TAILQ_HEAD_INITIALIZER(head)				\
+	{ NULL, &(head).tqh_first }
+
+#define DWC_TAILQ_ENTRY(type)						\
+struct {								\
+	struct type *tqe_next;	/* next element */			\
+	struct type **tqe_prev;	/* address of previous next element */	\
+}
+
+/*
+ * tail queue access methods
+ */
+#define DWC_TAILQ_FIRST(head)		((head)->tqh_first)
+#define DWC_TAILQ_END(head)		NULL
+#define DWC_TAILQ_NEXT(elm, field)	((elm)->field.tqe_next)
+#define DWC_TAILQ_LAST(head, headname)					\
+	(*(((struct headname *)((head)->tqh_last))->tqh_last))
+/* XXX */
+#define DWC_TAILQ_PREV(elm, headname, field)				\
+	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
+#define DWC_TAILQ_EMPTY(head)						\
+	(TAILQ_FIRST(head) == TAILQ_END(head))
+
+#define DWC_TAILQ_FOREACH(var, head, field)				\
+	for((var) = TAILQ_FIRST(head);					\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_NEXT(var, field))
+
+#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
+	for((var) = TAILQ_LAST(head, headname);				\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_PREV(var, headname, field))
+
+/*
+ * Tail queue functions.
+ */
+#define DWC_TAILQ_INIT(head) do {					\
+	(head)->tqh_first = NULL;					\
+	(head)->tqh_last = &(head)->tqh_first;				\
+} while (0)
+
+#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
+		(head)->tqh_first->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(head)->tqh_first = (elm);					\
+	(elm)->field.tqe_prev = &(head)->tqh_first;			\
+} while (0)
+
+#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.tqe_next = NULL;					\
+	(elm)->field.tqe_prev = (head)->tqh_last;			\
+	*(head)->tqh_last = (elm);					\
+	(head)->tqh_last = &(elm)->field.tqe_next;			\
+} while (0)
+
+#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(listelm)->field.tqe_next = (elm);				\
+	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
+} while (0)
+
+#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do {		\
+	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
+	(elm)->field.tqe_next = (listelm);				\
+	*(listelm)->field.tqe_prev = (elm);				\
+	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
+} while (0)
+
+#define DWC_TAILQ_REMOVE(head, elm, field) do {				\
+	if (((elm)->field.tqe_next) != NULL)				\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    (elm)->field.tqe_prev;				\
+	else								\
+		(head)->tqh_last = (elm)->field.tqe_prev;		\
+	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
+} while (0)
+
+#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do {			\
+	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
+		(elm2)->field.tqe_next->field.tqe_prev =		\
+		    &(elm2)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm2)->field.tqe_next;		\
+	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
+	*(elm2)->field.tqe_prev = (elm2);				\
+} while (0)
+
+/*
+ * Circular queue definitions.
+ */
+#define DWC_CIRCLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *cqh_first;		/* first element */		\
+	struct type *cqh_last;		/* last element */		\
+}
+
+#define DWC_CIRCLEQ_HEAD_INITIALIZER(head)				\
+	{ DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) }
+
+#define DWC_CIRCLEQ_ENTRY(type)						\
+struct {								\
+	struct type *cqe_next;		/* next element */		\
+	struct type *cqe_prev;		/* previous element */		\
+}
+
+/*
+ * Circular queue access methods
+ */
+#define DWC_CIRCLEQ_FIRST(head)		((head)->cqh_first)
+#define DWC_CIRCLEQ_LAST(head)		((head)->cqh_last)
+#define DWC_CIRCLEQ_END(head)		((void *)(head))
+#define DWC_CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
+#define DWC_CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
+#define DWC_CIRCLEQ_EMPTY(head)						\
+	(DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head))
+
+#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL))
+
+#define DWC_CIRCLEQ_FOREACH(var, head, field)				\
+	for((var) = DWC_CIRCLEQ_FIRST(head);				\
+	    (var) != DWC_CIRCLEQ_END(head);				\
+	    (var) = DWC_CIRCLEQ_NEXT(var, field))
+
+#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field)			\
+	for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \
+	    (var) != DWC_CIRCLEQ_END(head);					\
+	    (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field))
+
+#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
+	for((var) = DWC_CIRCLEQ_LAST(head);				\
+	    (var) != DWC_CIRCLEQ_END(head);				\
+	    (var) = DWC_CIRCLEQ_PREV(var, field))
+
+/*
+ * Circular queue functions.
+ */
+#define DWC_CIRCLEQ_INIT(head) do {					\
+	(head)->cqh_first = DWC_CIRCLEQ_END(head);			\
+	(head)->cqh_last = DWC_CIRCLEQ_END(head);			\
+} while (0)
+
+#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do {				\
+	(elm)->field.cqe_next = NULL;					\
+	(elm)->field.cqe_prev = NULL;					\
+} while (0)
+
+#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
+	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
+	(elm)->field.cqe_prev = (listelm);				\
+	if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
+	(listelm)->field.cqe_next = (elm);				\
+} while (0)
+
+#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {	\
+	(elm)->field.cqe_next = (listelm);				\
+	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
+	if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
+	(listelm)->field.cqe_prev = (elm);				\
+} while (0)
+
+#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.cqe_next = (head)->cqh_first;			\
+	(elm)->field.cqe_prev = DWC_CIRCLEQ_END(head);			\
+	if ((head)->cqh_last == DWC_CIRCLEQ_END(head))			\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(head)->cqh_first->field.cqe_prev = (elm);		\
+	(head)->cqh_first = (elm);					\
+} while (0)
+
+#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.cqe_next = DWC_CIRCLEQ_END(head);			\
+	(elm)->field.cqe_prev = (head)->cqh_last;			\
+	if ((head)->cqh_first == DWC_CIRCLEQ_END(head))			\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(head)->cqh_last->field.cqe_next = (elm);		\
+	(head)->cqh_last = (elm);					\
+} while (0)
+
+#define DWC_CIRCLEQ_REMOVE(head, elm, field) do {			\
+	if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
+		(head)->cqh_last = (elm)->field.cqe_prev;		\
+	else								\
+		(elm)->field.cqe_next->field.cqe_prev =			\
+		    (elm)->field.cqe_prev;				\
+	if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
+		(head)->cqh_first = (elm)->field.cqe_next;		\
+	else								\
+		(elm)->field.cqe_prev->field.cqe_next =			\
+		    (elm)->field.cqe_next;				\
+} while (0)
+
+#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do {			\
+	DWC_CIRCLEQ_REMOVE(head, elm, field);				\
+	DWC_CIRCLEQ_INIT_ENTRY(elm, field);				\
+} while (0)
+
+#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do {		\
+	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
+	    DWC_CIRCLEQ_END(head))					\
+		(head).cqh_last = (elm2);				\
+	else								\
+		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
+	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
+	    DWC_CIRCLEQ_END(head))					\
+		(head).cqh_first = (elm2);				\
+	else								\
+		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
+} while (0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DWC_LIST_H_ */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_adp.h

@@ -0,0 +1,82 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
+ * $Revision: #8 $
+ * $Date: 2013/04/09 $
+ * $Change: 2201932 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+
+#ifndef __DWC_OTG_ADP_H__
+#define __DWC_OTG_ADP_H__
+
+/**
+ * @file
+ *
+ * This file contains the Attach Detect Protocol interfaces and defines
+ * (functions) and structures for Linux.
+ *
+ */
+
+#define DWC_OTG_ADP_UNATTACHED	0
+#define DWC_OTG_ADP_ATTACHED	1
+#define DWC_OTG_ADP_UNKOWN	2
+#define HOST_RTIM_THRESHOLD 5
+#define DEVICE_RTIM_THRESHOLD 3
+
+typedef struct dwc_otg_adp {
+	uint32_t adp_started;	
+	uint32_t initial_probe;
+	int32_t probe_timer_values[2];
+	uint32_t probe_enabled;
+	uint32_t sense_enabled;
+	dwc_timer_t *sense_timer;
+	uint32_t sense_timer_started;
+	dwc_timer_t *vbuson_timer;
+	uint32_t vbuson_timer_started;
+	uint32_t attached;
+	uint32_t probe_counter;
+	uint32_t gpwrdn;
+} dwc_otg_adp_t;
+
+/**
+ * Attach Detect Protocol functions
+ */
+
+extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value);
+extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if);
+extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if);
+extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if);
+extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if);
+extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
+extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if);
+extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if);
+extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
+
+#endif //__DWC_OTG_ADP_H__

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_attr.h

@@ -0,0 +1,85 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
+ * $Revision: #13 $
+ * $Date: 2010/06/21 $
+ * $Change: 1532021 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ * 
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ * 
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+
+#if !defined(__DWC_OTG_ATTR_H__)
+#define __DWC_OTG_ATTR_H__
+
+/** @file
+ * This file contains the interface to the Linux device attributes.
+ */
+extern struct device_attribute dev_attr_regoffset;
+extern struct device_attribute dev_attr_regvalue;
+
+extern struct device_attribute dev_attr_mode;
+extern struct device_attribute dev_attr_hnpcapable;
+extern struct device_attribute dev_attr_srpcapable;
+extern struct device_attribute dev_attr_hnp;
+extern struct device_attribute dev_attr_srp;
+extern struct device_attribute dev_attr_buspower;
+extern struct device_attribute dev_attr_bussuspend;
+extern struct device_attribute dev_attr_mode_ch_tim_en;
+extern struct device_attribute dev_attr_fr_interval;
+extern struct device_attribute dev_attr_busconnected;
+extern struct device_attribute dev_attr_gotgctl;
+extern struct device_attribute dev_attr_gusbcfg;
+extern struct device_attribute dev_attr_grxfsiz;
+extern struct device_attribute dev_attr_gnptxfsiz;
+extern struct device_attribute dev_attr_gpvndctl;
+extern struct device_attribute dev_attr_ggpio;
+extern struct device_attribute dev_attr_guid;
+extern struct device_attribute dev_attr_gsnpsid;
+extern struct device_attribute dev_attr_devspeed;
+extern struct device_attribute dev_attr_enumspeed;
+extern struct device_attribute dev_attr_hptxfsiz;
+extern struct device_attribute dev_attr_hprt0;
+#ifdef CONFIG_USB_DWC_OTG_LPM
+extern struct device_attribute dev_attr_lpm_response;
+extern struct device_attribute devi_attr_sleep_status;
+#endif
+
+void dwc_otg_attr_create(
+#ifdef LM_INTERFACE
+				struct lm_device *dev
+#elif  PCI_INTERFACE
+				struct pci_dev *dev
+#endif
+    );
+
+void dwc_otg_attr_remove(
+#ifdef LM_INTERFACE
+				struct lm_device *dev
+#elif  PCI_INTERFACE
+				struct pci_dev *dev
+#endif
+    );
+#endif

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_common.h

@@ -0,0 +1,82 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#include "basic_types.h"
+#include <osdep_api.h>
+//#include "va_list.h"
+#include <stdarg.h>
+
+#include "diag.h"
+#include "dwc_otg_dbg.h"
+#include "dwc_os.h"
+
+
+typedef struct _RAM_OTG_FUNCTION_TABLE_ {
+    VOID*   (*RamMemSet)            (void *dest, int byte, SIZE_T size);
+    VOID*   (*RamMemCpy)            (void *dest, void const *src, SIZE_T size);
+    int     (*RamMemCmp)            (void const*m1, void const *m2, SIZE_T size);
+    int     (*RamStrnCmp)           (const char *s1, const char *s2, SIZE_T size);
+    int     (*RamStrCmp)            (const char *s1, const char *s2);
+    SIZE_T  (*RamStrLen)            (char const *str);
+    char*   (*RamStrCpy)            (char *to, char const *from);
+    char*   (*RamStrDup)            (char const *str);
+    int     (*RamAtoi)              (const char *str, int32_t *value);
+    int     (*RamAtoui)             (const char *str, uint32_t *value);
+    int     (*RamVsnPrintf)         (char *str, int size, const char *format, ...);
+    u32     (*RamSPrintf)           (u8 *buf, const char *fmt, ...);
+    int     (*RamSnPrintf)          (char *dst, int count, const char * src, ...);
+    u8*     (*RamZmalloc)           (u32 sz);
+    u8*     (*RamZmallocAtomic)     (u32 sz);
+    VOID    (*RamMfree)             (u8 *pbuf, u32 sz);
+    dwc_spinlock_t*    (*RamSpinlockAlloc)     (void);
+    VOID    (*RamSpinlockFree)      (dwc_spinlock_t *lock);
+    VOID    (*RamSpinlock)          (dwc_spinlock_t *lock);
+    VOID    (*RamSpinUnlock)        (dwc_spinlock_t *lock);
+    VOID    (*RamSpinIrqSave)       (dwc_spinlock_t *lock, dwc_irqflags_t *flags);
+    VOID    (*RamSpinIrqRestore)    (dwc_spinlock_t *lock, dwc_irqflags_t flags);
+    dwc_mutex_t*(*RamMutexAlloc)    (void);
+    VOID    (*RamMutexFree)         (dwc_mutex_t *mutex);
+    VOID    (*RamMutexLock)         (dwc_mutex_t *mutex);
+    int     (*RamMutexTryLock)      (dwc_mutex_t *mutex);
+    VOID    (*RamMutexUnLock)       (dwc_mutex_t *mutex);
+    uint32_t(*RamUDelay)            (uint32_t usecs);
+    void    (*RamMSleep)            (uint32_t msecs);
+    VOID    (*timer_callback)       (unsigned long data);
+    dwc_timer_t *(*RamTimerAlloc)   (char *name, dwc_timer_callback_t cb, void *data);
+    VOID    (*RamTimerFree)         (dwc_timer_t *timer);
+    VOID    (*RamTimerSche)         (dwc_timer_t *timer, uint32_t time_ms);
+    VOID    (*RamTimerCancel)       (dwc_timer_t *timer);
+    VOID    (*RamEnterCritical)     (void);
+    VOID    (*RamExitCritical)      (void);
+}RAM_OTG_FUNCTION_TABLE, *PRAM_OTG_FUNCTION_TABLE;
+
+
+
+// Global Variable
+extern RAM_OTG_FUNCTION_TABLE gRamOTGFunTbl;
+
+// Funtion Prototype
+// ROM
+_LONG_CALL_ void dwc_otg_wrapper_reset(IN  VOID);
+_LONG_CALL_ void dwc_otg_wrapper_init_boot(IN  VOID);
+_LONG_CALL_ void dwc_otg_power_init(IN VOID);
+
+_LONG_CALL_ VOID RtlInitListhead_Otg(IN  _LIST *list);
+_LONG_CALL_ u32	RtlIsListEmpty_Otg(IN  _LIST *phead);
+_LONG_CALL_ VOID RtlListInsertHead_Otg(IN  _LIST *plist,IN  _LIST *phead);
+_LONG_CALL_ VOID RtlListInsertTail_Otg(IN  _LIST *plist,IN  _LIST *phead);
+_LONG_CALL_ _LIST *RtlListGetNext_Otg(IN  _LIST *plist);
+_LONG_CALL_ VOID RtlListDelete_Otg(IN _LIST *plist);
+
+extern _LONG_CALL_ char *DWC_STRDUP_ROM(char const *str);
+extern _LONG_CALL_ int DWC_ATOI_ROM(const char *str, int32_t *value);
+extern _LONG_CALL_ int DWC_ATOUI_ROM(const char *str, uint32_t *value);
+// RAM
+void dwc_otg_wrapper_init(IN VOID);
+
+

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_core_if.h

@@ -0,0 +1,746 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
+ * $Revision: #15 $
+ * $Date: 2012/12/10 $
+ * $Change: 2123206 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+#if !defined(__DWC_CORE_IF_H__)
+#define __DWC_CORE_IF_H__
+
+#include "dwc_os.h"
+
+/** @file
+ * This file defines DWC_OTG Core API
+ */
+
+struct dwc_otg_core_if;
+typedef struct dwc_otg_core_if dwc_otg_core_if_t;
+
+/** Maximum number of Periodic FIFOs */
+#define MAX_PERIO_FIFOS 15
+/** Maximum number of Periodic FIFOs */
+#define MAX_TX_FIFOS 15
+
+/** Maximum number of Endpoints/HostChannels */
+#define MAX_EPS_CHANNELS 16
+
+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr);
+extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if);
+extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if);
+
+extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if);
+extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if);
+
+extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if);
+extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if);
+
+extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if);
+
+/** This function should be called on every hardware interrupt. */
+extern int32_t dwc_otg_handle_common_intr(void *otg_dev);
+
+/** @name OTG Core Parameters */
+/** @{ */
+
+/**
+ * Specifies the OTG capabilities. The driver will automatically
+ * detect the value for this parameter if none is specified.
+ * 0 - HNP and SRP capable (default)
+ * 1 - SRP Only capable
+ * 2 - No HNP/SRP capable
+ */
+extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if);
+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
+
+extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if);
+#define dwc_param_opt_default 1
+
+/**
+ * Specifies whether to use slave or DMA mode for accessing the data
+ * FIFOs. The driver will automatically detect the value for this
+ * parameter if none is specified.
+ * 0 - Slave
+ * 1 - DMA (default, if available)
+ */
+extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_dma_enable_default 1
+
+/**
+ * When DMA mode is enabled specifies whether to use
+ * address DMA or DMA Descritor mode for accessing the data
+ * FIFOs in device mode. The driver will automatically detect
+ * the value for this parameter if none is specified.
+ * 0 - address DMA
+ * 1 - DMA Descriptor(default, if available)
+ */
+extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if,
+					     int32_t val);
+extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_dma_desc_enable_default 1
+
+/** The DMA Burst size (applicable only for External DMA
+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
+ */
+extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if,
+					    int32_t val);
+extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if);
+#define dwc_param_dma_burst_size_default 32
+
+/**
+ * Specifies the maximum speed of operation in host and device mode.
+ * The actual speed depends on the speed of the attached device and
+ * the value of phy_type. The actual speed depends on the speed of the
+ * attached device.
+ * 0 - High Speed (default)
+ * 1 - Full Speed
+ */
+extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if);
+#define dwc_param_speed_default 0
+#define DWC_SPEED_PARAM_HIGH 0
+#define DWC_SPEED_PARAM_FULL 1
+
+/** Specifies whether low power mode is supported when attached
+ *	to a Full Speed or Low Speed device in host mode.
+ * 0 - Don't support low power mode (default)
+ * 1 - Support low power mode
+ */
+extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
+							  core_if, int32_t val);
+extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t
+							      * core_if);
+#define dwc_param_host_support_fs_ls_low_power_default 0
+
+/** Specifies the PHY clock rate in low power mode when connected to a
+ * Low Speed device in host mode. This parameter is applicable only if
+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
+ * then defaults to 6 MHZ otherwise 48 MHZ.
+ *
+ * 0 - 48 MHz
+ * 1 - 6 MHz
+ */
+extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
+						       core_if, int32_t val);
+extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
+							   core_if);
+#define dwc_param_host_ls_low_power_phy_clk_default 0
+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
+
+/**
+ * 0 - Use cC FIFO size parameters
+ * 1 - Allow dynamic FIFO sizing (default)
+ */
+extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
+						 int32_t val);
+extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t *
+						     core_if);
+#define dwc_param_enable_dynamic_fifo_default 1
+
+/** Total number of 4-byte words in the data FIFO memory. This
+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
+ * Tx FIFOs.
+ * 32 to 32768 (default 8192)
+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
+ */
+extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if,
+					    int32_t val);
+extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if);
+#define dwc_param_data_fifo_size_default 8192
+
+/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
+ * FIFO sizing is enabled.
+ * 16 to 32768 (default 1064)
+ */
+extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if,
+					      int32_t val);
+extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if);
+#define dwc_param_dev_rx_fifo_size_default 1064
+
+/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
+ * when dynamic FIFO sizing is enabled.
+ * 16 to 32768 (default 1024)
+ */
+extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
+						     core_if, int32_t val);
+extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
+							 core_if);
+#define dwc_param_dev_nperio_tx_fifo_size_default 1024
+
+/** Number of 4-byte words in each of the periodic Tx FIFOs in device
+ * mode when dynamic FIFO sizing is enabled.
+ * 4 to 768 (default 256)
+ */
+extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
+						    int32_t val, int fifo_num);
+extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t *
+							core_if, int fifo_num);
+#define dwc_param_dev_perio_tx_fifo_size_default 256
+
+/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
+ * FIFO sizing is enabled.
+ * 16 to 32768 (default 1024)
+ */
+extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
+					       int32_t val);
+extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if);
+#define dwc_param_host_rx_fifo_size_default 1024
+
+/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
+ * when Dynamic FIFO sizing is enabled in the core.
+ * 16 to 32768 (default 1024)
+ */
+extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
+						      core_if, int32_t val);
+extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
+							  core_if);
+#define dwc_param_host_nperio_tx_fifo_size_default 1024
+
+/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
+ * FIFO sizing is enabled.
+ * 16 to 32768 (default 1024)
+ */
+extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
+						     core_if, int32_t val);
+extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
+							 core_if);
+#define dwc_param_host_perio_tx_fifo_size_default 1024
+
+/** The maximum transfer size supported in bytes.
+ * 2047 to 65,535  (default 65,535)
+ */
+extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
+					       int32_t val);
+extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if);
+#define dwc_param_max_transfer_size_default 65535
+
+/** The maximum number of packets in a transfer.
+ * 15 to 511  (default 511)
+ */
+extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if,
+					      int32_t val);
+extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if);
+#define dwc_param_max_packet_count_default 511
+
+/** The number of host channel registers to use.
+ * 1 to 16 (default 12)
+ * Note: The FPGA configuration supports a maximum of 12 host channels.
+ */
+extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if,
+					   int32_t val);
+extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if);
+#define dwc_param_host_channels_default 12
+
+/** The number of endpoints in addition to EP0 available for device
+ * mode operations.
+ * 1 to 15 (default 6 IN and OUT)
+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
+ * endpoints in addition to EP0.
+ */
+extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if,
+					   int32_t val);
+extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if);
+#define dwc_param_dev_endpoints_default 6
+
+/**
+ * Specifies the type of PHY interface to use. By default, the driver
+ * will automatically detect the phy_type.
+ *
+ * 0 - Full Speed PHY
+ * 1 - UTMI+ (default)
+ * 2 - ULPI
+ */
+extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if);
+#define DWC_PHY_TYPE_PARAM_FS 0
+#define DWC_PHY_TYPE_PARAM_UTMI 1
+#define DWC_PHY_TYPE_PARAM_ULPI 2
+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
+
+/**
+ * Specifies the UTMI+ Data Width. This parameter is
+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
+ * PHY_TYPE, this parameter indicates the data width between
+ * the MAC and the ULPI Wrapper.) Also, this parameter is
+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
+ * to "8 and 16 bits", meaning that the core has been
+ * configured to work at either data path width.
+ *
+ * 8 or 16 bits (default 16)
+ */
+extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if,
+					    int32_t val);
+extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if);
+#define dwc_param_phy_utmi_width_default 16
+
+/**
+ * Specifies whether the ULPI operates at double or single
+ * data rate. This parameter is only applicable if PHY_TYPE is
+ * ULPI.
+ *
+ * 0 - single data rate ULPI interface with 8 bit wide data
+ * bus (default)
+ * 1 - double data rate ULPI interface with 4 bit wide data
+ * bus
+ */
+extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if,
+					  int32_t val);
+extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if);
+#define dwc_param_phy_ulpi_ddr_default 0
+
+/**
+ * Specifies whether to use the internal or external supply to
+ * drive the vbus with a ULPI phy.
+ */
+extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
+					       int32_t val);
+extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if);
+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
+
+/**
+ * Specifies whether to use the I2Cinterface for full speed PHY. This
+ * parameter is only applicable if PHY_TYPE is FS.
+ * 0 - No (default)
+ * 1 - Yes
+ */
+extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_i2c_enable_default 0
+
+extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if);
+#define dwc_param_ulpi_fs_ls_default 0
+
+extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if);
+#define dwc_param_ts_dline_default 0
+
+/**
+ * Specifies whether dedicated transmit FIFOs are
+ * enabled for non periodic IN endpoints in device mode
+ * 0 - No
+ * 1 - Yes
+ */
+extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
+						 int32_t val);
+extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t *
+						     core_if);
+#define dwc_param_en_multiple_tx_fifo_default 1
+
+/** Number of 4-byte words in each of the Tx FIFOs in device
+ * mode when dynamic FIFO sizing is enabled.
+ * 4 to 768 (default 256)
+ */
+//extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
+//					      int fifo_num, int32_t val);
+extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val,
+				       int fifo_num);
+
+extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
+						  int fifo_num);
+#define dwc_param_dev_tx_fifo_size_default 256
+
+/** Thresholding enable flag-
+ * bit 0 - enable non-ISO Tx thresholding
+ * bit 1 - enable ISO Tx thresholding
+ * bit 2 - enable Rx thresholding
+ */
+extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num);
+#define dwc_param_thr_ctl_default 0
+
+/** Thresholding length for Tx
+ * FIFOs in 32 bit DWORDs
+ */
+extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if,
+					   int32_t val);
+extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if);
+#define dwc_param_tx_thr_length_default 64
+
+/** Thresholding length for Rx
+ *	FIFOs in 32 bit DWORDs
+ */
+extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if,
+					   int32_t val);
+extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if);
+#define dwc_param_rx_thr_length_default 64
+
+/**
+ * Specifies whether LPM (Link Power Management) support is enabled
+ */
+extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_lpm_enable_default 1
+
+/**
+ * Specifies whether LPM Errata (Link Power Management) support is enabled
+ */
+extern int dwc_otg_set_param_besl_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_besl_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_besl_enable_default 0
+
+/**
+ * Specifies baseline_besl default value
+ */
+extern int dwc_otg_set_param_baseline_besl(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_baseline_besl(dwc_otg_core_if_t * core_if);
+#define dwc_param_baseline_besl_default 0
+
+/**
+ * Specifies deep_besl default value
+ */
+extern int dwc_otg_set_param_deep_besl(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_deep_besl(dwc_otg_core_if_t * core_if);
+#define dwc_param_deep_besl_default 15
+
+/**
+ * Specifies whether PTI enhancement is enabled
+ */
+extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_pti_enable_default 0
+
+/**
+ * Specifies whether MPI enhancement is enabled
+ */
+extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_mpi_enable_default 0
+
+/**
+ * Specifies whether ADP capability is enabled
+ */
+extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if);
+#define dwc_param_adp_enable_default 0
+
+/**
+ * Specifies whether IC_USB capability is enabled
+ */
+
+extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if);
+#define dwc_param_ic_usb_cap_default 0
+
+extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if,
+					   int32_t val);
+extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if);
+#define dwc_param_ahb_thr_ratio_default 0
+
+extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if);
+#define dwc_param_power_down_default 0
+
+extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if);
+#define dwc_param_reload_ctl_default 0
+
+extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if,
+					 int32_t val);
+extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if);
+#define dwc_param_dev_out_nak_default 0
+
+extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if,
+					 int32_t val);
+extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if);
+#define dwc_param_cont_on_bna_default 0
+
+extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if,
+					int32_t val);
+extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if);
+#define dwc_param_ahb_single_default 0
+
+extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val);
+extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if);
+#define dwc_param_otg_ver_default 0
+
+/** @} */
+
+/** @name Access to registers and bit-fields */
+
+/**
+ * Dump core registers and SPRAM
+ */
+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if);
+extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if);
+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if);
+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if);
+
+/**
+ * Get host negotiation status.
+ */
+extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get srp status
+ */
+extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if);
+
+/**
+ * Set hnpreq bit in the GOTGCTL register.
+ */
+extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get Content of SNPSID register.
+ */
+extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get current mode.
+ * Returns 0 if in device mode, and 1 if in host mode.
+ */
+extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of hnpcapable field in the GUSBCFG register
+ */
+extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of hnpcapable field in the GUSBCFG register
+ */
+extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of srpcapable field in the GUSBCFG register
+ */
+extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of srpcapable field in the GUSBCFG register
+ */
+extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of devspeed field in the DCFG register
+ */
+extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of devspeed field in the DCFG register
+ */
+extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get the value of busconnected field from the HPRT0 register
+ */
+extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if);
+
+/**
+ * Gets the device enumeration Speed.
+ */
+extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of prtpwr field from the HPRT0 register
+ */
+extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of flag indicating core state - hibernated or not
+ */
+extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if);
+
+/**
+ * Set value of prtpwr field from the HPRT0 register
+ */
+extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of prtsusp field from the HPRT0 regsiter
+ */
+extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of prtpwr field from the HPRT0 register
+ */
+extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of ModeChTimEn field from the HCFG regsiter
+ */
+extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of ModeChTimEn field from the HCFG regsiter
+ */
+extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of Fram Interval field from the HFIR regsiter
+ */
+extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of Frame Interval field from the HFIR regsiter
+ */
+extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Set value of prtres field from the HPRT0 register
+ *FIXME Remove?
+ */
+extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of rmtwkupsig bit in DCTL register
+ */
+extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of besl_reject bit in DCTL register
+ */
+ 
+extern uint32_t dwc_otg_get_beslreject(dwc_otg_core_if_t * core_if);
+
+/**
+ * Set value of besl_reject bit in DCTL register
+ */
+ 
+extern void dwc_otg_set_beslreject(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of prt_sleep_sts field from the GLPMCFG register
+ */
+extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of rem_wkup_en field from the GLPMCFG register
+ */
+extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if);
+
+/**
+ * Get value of appl_resp field from the GLPMCFG register
+ */
+extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of appl_resp field from the GLPMCFG register
+ */
+extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of hsic_connect field from the GLPMCFG register
+ */
+extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of hsic_connect field from the GLPMCFG register
+ */
+extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * Get value of inv_sel_hsic field from the GLPMCFG register.
+ */
+extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if);
+/**
+ * Set value of inv_sel_hsic field from the GLPMFG register.
+ */
+extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val);
+/**
+ * Set value of hird_thresh field from the GLPMFG register.
+ */
+extern void dwc_otg_set_hirdthresh(dwc_otg_core_if_t * core_if, uint32_t val);
+/**
+ * Get value of hird_thresh field from the GLPMFG register.
+ */
+extern uint32_t dwc_otg_get_hirdthresh(dwc_otg_core_if_t * core_if);
+
+
+/*
+ * Some functions for accessing registers
+ */
+
+/**
+ *  GOTGCTL register
+ */
+extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GUSBCFG register
+ */
+extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GRXFSIZ register
+ */
+extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GNPTXFSIZ register
+ */
+extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
+
+extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GGPIO register
+ */
+extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GUID register
+ */
+extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * HPRT0 register
+ */
+extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if);
+extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val);
+
+/**
+ * GHPTXFSIZE
+ */
+extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if);
+
+/** @} */
+
+#endif /* __DWC_CORE_IF_H__ */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_dbg.h

@@ -0,0 +1,115 @@
+/* ==========================================================================
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ * 
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ * 
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+
+#ifndef __DWC_OTG_DBG_H__
+#define __DWC_OTG_DBG_H__
+#include "section_config.h"
+
+//#define OTGDEBUG    0
+#undef OTGDEBUG
+#define VERBOSE     1
+
+/** @file
+ * This file defines debug levels.
+ * Debugging support vanishes in non-debug builds.  
+ */
+
+/**
+ * The Debug Level bit-mask variable.
+ */
+extern uint32_t g_dbg_lvl;
+/**
+ * Set the Debug Level variable.
+ */
+extern _LONG_CALL_ uint32_t SET_DEBUG_LEVEL(const uint32_t new);
+
+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
+#define DBG_CIL		(0x2)
+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
+ * messages */
+#define DBG_CILV	(0x20)
+/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
+ *  messages */
+#define DBG_PCD		(0x4)
+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
+ * messages */
+#define DBG_PCDV	(0x40)
+/** When debug level has the DBG_HCD bit set, display Host debug messages */
+#define DBG_HCD		(0x8)
+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
+ * messages */
+#define DBG_HCDV	(0x80)
+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
+ *  mode. */
+#define DBG_HCD_URB	(0x800)
+
+/** When debug level has any bit set, display debug messages */
+#define DBG_ANY		(0xFF)
+
+/** All debug messages off */
+#define DBG_OFF		0
+
+/** Prefix string for DWC_DEBUG print macros. */
+#define USB_DWC "DWC_otg: "
+
+/** 
+ * Print a debug message when the Global debug level variable contains
+ * the bit defined in <code>lvl</code>.
+ *
+ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
+ * @param[in] x - like printf
+ *
+ *    Example:<p>
+ * <code>
+ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
+ * </code>
+ * <br>
+ * results in:<br> 
+ * <code>
+ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
+ * </code>
+ */
+#ifdef OTGDEBUG
+
+//# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0)
+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)DBG_8195A_OTG(x); }while(0)
+
+# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
+
+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
+
+#else
+
+# define DWC_DEBUGPL(lvl, x...) do{}while(0)
+# define DWC_DEBUGP(x...)
+
+# define CHK_DEBUG_LEVEL(level) (0)
+
+#endif /*DEBUG*/
+#endif

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_driver.h

@@ -0,0 +1,115 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
+ * $Revision: #19 $
+ * $Date: 2010/11/15 $
+ * $Change: 1627671 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ * 
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ * 
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+
+#ifndef __DWC_OTG_DRIVER_H__
+#define __DWC_OTG_DRIVER_H__
+
+/** @file
+ * This file contains the interface to the Linux driver.
+ */
+//#include "dwc_otg_os_dep.h"
+#include "dwc_otg_core_if.h"
+
+
+/* Type declarations */
+struct dwc_otg_pcd;
+struct dwc_otg_hcd;
+
+/**
+ * This structure is a wrapper that encapsulates the driver components used to
+ * manage a single DWC_otg controller.
+ */
+typedef struct dwc_otg_device {
+	/** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE
+	 * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD
+	 * require this. */
+	//struct os_dependent os_dep;
+    /** Base address returned from ioremap() */
+	void *base;
+	uint32_t reg_offset;
+	/** Pointer to the core interface structure. */
+	dwc_otg_core_if_t *core_if;
+
+	/** Pointer to the PCD structure. */
+	struct dwc_otg_pcd *pcd;
+
+	/** Pointer to the HCD structure. */
+	struct dwc_otg_hcd *hcd;
+
+	/** Flag to indicate whether the common IRQ handler is installed. */
+	uint8_t common_irq_installed;
+
+} dwc_otg_device_t;
+
+/*We must clear S3C24XX_EINTPEND external interrupt register 
+ * because after clearing in this register trigerred IRQ from 
+ * H/W core in kernel interrupt can be occured again before OTG
+ * handlers clear all IRQ sources of Core registers because of
+ * timing latencies and Low Level IRQ Type.
+ */
+#ifdef CONFIG_MACH_IPMATE
+#define  S3C2410X_CLEAR_EINTPEND()   \
+do { \
+	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
+} while (0)
+#else
+#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
+#endif
+
+
+typedef struct USB_OTG_DRV_ADP {
+    dwc_otg_device_t    *otgdev;
+    IRQ_HANDLE          *pIrqHnd;
+#if !TASK_SCHEDULER_DISABLED
+            _Sema       Sema;
+#else
+            u32         Sema;
+#endif
+#ifdef PLATFORM_FREERTOS
+        xTaskHandle OTGTask;
+#else
+        u32         OTGTask;
+#endif
+
+}USB_OTG_DRV_ADP,*PUSB_OTG_DRV_ADP;
+
+
+
+typedef struct _DWC_OTG_ADAPTER_ {
+    u32                 temp0;
+    dwc_otg_device_t    *otgdev;
+    u8                  TestItem;
+}DWC_OTG_ADAPTER, *PDWC_OTG_ADAPTER;
+
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_hcd.h

@@ -0,0 +1,804 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
+ * $Revision: #58 $
+ * $Date: 2011/09/15 $
+ * $Change: 1846647 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+#ifndef DWC_DEVICE_ONLY
+#ifndef __DWC_HCD_H__
+#define __DWC_HCD_H__
+
+//#include "dwc_otg_os_dep.h"
+#include "usb.h"
+#include "dwc_otg_hcd_if.h"
+#include "dwc_otg_core_if.h"
+#include "dwc_list.h"
+#include "dwc_otg_cil.h"
+
+/**
+ * @file
+ *
+ * This file contains the structures, constants, and interfaces for
+ * the Host Contoller Driver (HCD).
+ *
+ * The Host Controller Driver (HCD) is responsible for translating requests
+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
+ * It isolates the USBD from the specifics of the controller by providing an
+ * API to the USBD.
+ */
+
+struct dwc_otg_hcd_pipe_info {
+	uint8_t dev_addr;
+	uint8_t ep_num;
+	uint8_t pipe_type;
+	uint8_t pipe_dir;
+	uint16_t mps;
+};
+
+struct dwc_otg_hcd_iso_packet_desc {
+	uint32_t offset;
+	uint32_t length;
+	uint32_t actual_length;
+	uint32_t status;
+};
+
+struct dwc_otg_qtd;
+
+struct dwc_otg_hcd_urb {
+	void *priv;
+	struct dwc_otg_qtd *qtd;
+	void *buf;
+	dwc_dma_t dma;
+	void *setup_packet;
+	dwc_dma_t setup_dma;
+	uint32_t length;
+	uint32_t actual_length;
+	uint32_t status;
+	uint32_t error_count;
+	uint32_t packet_count;
+	uint32_t flags;
+	uint16_t interval;
+	struct dwc_otg_hcd_pipe_info pipe_info;
+	struct dwc_otg_hcd_iso_packet_desc iso_descs[0];
+};
+
+static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe)
+{
+	return pipe->ep_num;
+}
+
+static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info
+						*pipe)
+{
+	return pipe->pipe_type;
+}
+
+static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe)
+{
+	return pipe->mps;
+}
+
+static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info
+					       *pipe)
+{
+	return pipe->dev_addr;
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info
+					       *pipe)
+{
+	return (pipe->pipe_type == UE_ISOCHRONOUS);
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info
+					      *pipe)
+{
+	return (pipe->pipe_type == UE_INTERRUPT);
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info
+					       *pipe)
+{
+	return (pipe->pipe_type == UE_BULK);
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info
+						  *pipe)
+{
+	return (pipe->pipe_type == UE_CONTROL);
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe)
+{
+	return (pipe->pipe_dir == UE_DIR_IN);
+}
+
+static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info
+					      *pipe)
+{
+	return (!dwc_otg_hcd_is_pipe_in(pipe));
+}
+
+static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe,
+					 uint8_t devaddr, uint8_t ep_num,
+					 uint8_t pipe_type, uint8_t pipe_dir,
+					 uint16_t mps)
+{
+	pipe->dev_addr = devaddr;
+	pipe->ep_num = ep_num;
+	pipe->pipe_type = pipe_type;
+	pipe->pipe_dir = pipe_dir;
+	pipe->mps = mps;
+}
+
+/**
+ * Phases for control transfers.
+ */
+typedef enum dwc_otg_control_phase {
+	DWC_OTG_CONTROL_SETUP,
+	DWC_OTG_CONTROL_DATA,
+	DWC_OTG_CONTROL_STATUS
+} dwc_otg_control_phase_e;
+
+/** Transaction types. */
+typedef enum dwc_otg_transaction_type {
+	DWC_OTG_TRANSACTION_NONE,
+	DWC_OTG_TRANSACTION_PERIODIC,
+	DWC_OTG_TRANSACTION_NON_PERIODIC,
+	DWC_OTG_TRANSACTION_ALL
+} dwc_otg_transaction_type_e;
+
+struct dwc_otg_qh;
+
+/**
+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
+ * interrupt, or isochronous transfer. A single QTD is created for each URB
+ * (of one of these types) submitted to the HCD. The transfer associated with
+ * a QTD may require one or multiple transactions.
+ *
+ * A QTD is linked to a Queue Head, which is entered in either the
+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
+ * execution, some or all of its transactions may be executed. After
+ * execution, the state of the QTD is updated. The QTD may be retired if all
+ * its transactions are complete or if an error occurred. Otherwise, it
+ * remains in the schedule so more transactions can be executed later.
+ */
+typedef struct dwc_otg_qtd {
+	/**
+	 * Determines the PID of the next data packet for the data phase of
+	 * control transfers. Ignored for other transfer types.<br>
+	 * One of the following values:
+	 *	- DWC_OTG_HC_PID_DATA0
+	 *	- DWC_OTG_HC_PID_DATA1
+	 */
+	uint8_t data_toggle;
+
+	/** Current phase for control transfers (Setup, Data, or Status). */
+	dwc_otg_control_phase_e control_phase;
+
+	/** Keep track of the current split type
+	 * for FS/LS endpoints on a HS Hub */
+	uint8_t complete_split;
+
+	/** How many bytes transferred during SSPLIT OUT */
+	uint32_t ssplit_out_xfer_count;
+
+	/**
+	 * Holds the number of bus errors that have occurred for a transaction
+	 * within this transfer.
+	 */
+	uint8_t error_count;
+
+	/**
+	 * Index of the next frame descriptor for an isochronous transfer. A
+	 * frame descriptor describes the buffer position and length of the
+	 * data to be transferred in the next scheduled (micro)frame of an
+	 * isochronous transfer. It also holds status for that transaction.
+	 * The frame index starts at 0.
+	 */
+	uint16_t isoc_frame_index;
+
+	/** Position of the ISOC split on full/low speed */
+	uint8_t isoc_split_pos;
+
+	/** Position of the ISOC split in the buffer for the current frame */
+	uint16_t isoc_split_offset;
+
+	/** URB for this transfer */
+	struct dwc_otg_hcd_urb *urb;
+
+	struct dwc_otg_qh *qh;
+
+	/** This list of QTDs */
+	 DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry;
+
+	/** Indicates if this QTD is currently processed by HW. */
+	uint8_t in_process;
+
+	/** Number of DMA descriptors for this QTD */
+	uint8_t n_desc;
+
+	/** 
+	 * Last activated frame(packet) index. 
+	 * Used in Descriptor DMA mode only.
+	 */
+	uint16_t isoc_frame_index_last;
+
+} dwc_otg_qtd_t;
+
+DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd);
+
+/**
+ * A Queue Head (QH) holds the static characteristics of an endpoint and
+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
+ * be entered in either the non-periodic or periodic schedule.
+ */
+typedef struct dwc_otg_qh {
+	/**
+	 * Endpoint type.
+	 * One of the following values:
+	 *	- UE_CONTROL
+	 *	- UE_BULK
+	 *	- UE_INTERRUPT
+	 *	- UE_ISOCHRONOUS
+	 */
+	uint8_t ep_type;
+	uint8_t ep_is_in;
+
+	/** wMaxPacketSize Field of Endpoint Descriptor. */
+	uint16_t maxp;
+
+	/**
+	 * Device speed.
+	 * One of the following values:
+	 *	- DWC_OTG_EP_SPEED_LOW
+	 *	- DWC_OTG_EP_SPEED_FULL
+	 *	- DWC_OTG_EP_SPEED_HIGH
+	 */
+	uint8_t dev_speed;
+
+	/**
+	 * Determines the PID of the next data packet for non-control
+	 * transfers. Ignored for control transfers.<br>
+	 * One of the following values:
+	 *	- DWC_OTG_HC_PID_DATA0
+	 *	- DWC_OTG_HC_PID_DATA1
+	 */
+	uint8_t data_toggle;
+
+	/** Ping state if 1. */
+	uint8_t ping_state;
+
+	/**
+	 * List of QTDs for this QH.
+	 */
+	struct dwc_otg_qtd_list qtd_list;
+
+	/** Host channel currently processing transfers for this QH. */
+	struct dwc_hc *channel;
+
+	/** Full/low speed endpoint on high-speed hub requires split. */
+	uint8_t do_split;
+
+	/** @name Periodic schedule information */
+	/** @{ */
+
+	/** Bandwidth in microseconds per (micro)frame. */
+	uint16_t usecs;
+
+	/** Interval between transfers in (micro)frames. */
+	uint16_t interval;
+
+	/**
+	 * (micro)frame to initialize a periodic transfer. The transfer
+	 * executes in the following (micro)frame.
+	 */
+	uint16_t sched_frame;
+
+	/** (micro)frame at which last start split was initialized. */
+	uint16_t start_split_frame;
+
+	/** @} */
+
+	/** 
+	 * Used instead of original buffer if 
+	 * it(physical address) is not dword-aligned.
+	 */
+	uint8_t *dw_align_buf;
+	dwc_dma_t dw_align_buf_dma;
+
+	/** Entry for QH in either the periodic or non-periodic schedule. */
+	dwc_list_link_t qh_list_entry;
+
+	/** @name Descriptor DMA support */
+	/** @{ */
+
+	/** Descriptor List. */
+	dwc_otg_host_dma_desc_t *desc_list;
+
+	/** Descriptor List physical address. */
+	dwc_dma_t desc_list_dma;
+
+	/** 
+	 * Xfer Bytes array.
+	 * Each element corresponds to a descriptor and indicates 
+	 * original XferSize size value for the descriptor.
+	 */
+	uint32_t *n_bytes;
+
+	/** Actual number of transfer descriptors in a list. */
+	uint16_t ntd;
+
+	/** First activated isochronous transfer descriptor index. */
+	uint8_t td_first;
+	/** Last activated isochronous transfer descriptor index. */
+	uint8_t td_last;
+
+	/** @} */
+
+} dwc_otg_qh_t;
+
+DWC_CIRCLEQ_HEAD(hc_list, dwc_hc);
+
+/**
+ * This structure holds the state of the HCD, including the non-periodic and
+ * periodic schedules.
+ */
+struct dwc_otg_hcd {
+	/** The DWC otg device pointer */
+	struct dwc_otg_device *otg_dev;
+	/** DWC OTG Core Interface Layer */
+	dwc_otg_core_if_t *core_if;
+
+	/** Function HCD driver callbacks */
+	struct dwc_otg_hcd_function_ops *fops;
+
+	/** Internal DWC HCD Flags */
+	volatile union dwc_otg_hcd_internal_flags {
+		uint32_t d32;
+		struct {
+			unsigned port_connect_status_change:1;
+			unsigned port_connect_status:1;
+			unsigned port_reset_change:1;
+			unsigned port_enable_change:1;
+			unsigned port_suspend_change:1;
+			unsigned port_over_current_change:1;
+			unsigned port_l1_change:1;
+			unsigned reserved:26;
+		} b;
+	} flags;
+
+	/**
+	 * Inactive items in the non-periodic schedule. This is a list of
+	 * Queue Heads. Transfers associated with these Queue Heads are not
+	 * currently assigned to a host channel.
+	 */
+	dwc_list_link_t non_periodic_sched_inactive;
+
+	/**
+	 * Active items in the non-periodic schedule. This is a list of
+	 * Queue Heads. Transfers associated with these Queue Heads are
+	 * currently assigned to a host channel.
+	 */
+	dwc_list_link_t non_periodic_sched_active;
+
+	/**
+	 * Pointer to the next Queue Head to process in the active
+	 * non-periodic schedule.
+	 */
+	dwc_list_link_t *non_periodic_qh_ptr;
+
+	/**
+	 * Inactive items in the periodic schedule. This is a list of QHs for
+	 * periodic transfers that are _not_ scheduled for the next frame.
+	 * Each QH in the list has an interval counter that determines when it
+	 * needs to be scheduled for execution. This scheduling mechanism
+	 * allows only a simple calculation for periodic bandwidth used (i.e.
+	 * must assume that all periodic transfers may need to execute in the
+	 * same frame). However, it greatly simplifies scheduling and should
+	 * be sufficient for the vast majority of OTG hosts, which need to
+	 * connect to a small number of peripherals at one time.
+	 *
+	 * Items move from this list to periodic_sched_ready when the QH
+	 * interval counter is 0 at SOF.
+	 */
+	dwc_list_link_t periodic_sched_inactive;
+
+	/**
+	 * List of periodic QHs that are ready for execution in the next
+	 * frame, but have not yet been assigned to host channels.
+	 *
+	 * Items move from this list to periodic_sched_assigned as host
+	 * channels become available during the current frame.
+	 */
+	dwc_list_link_t periodic_sched_ready;
+
+	/**
+	 * List of periodic QHs to be executed in the next frame that are
+	 * assigned to host channels.
+	 *
+	 * Items move from this list to periodic_sched_queued as the
+	 * transactions for the QH are queued to the DWC_otg controller.
+	 */
+	dwc_list_link_t periodic_sched_assigned;
+
+	/**
+	 * List of periodic QHs that have been queued for execution.
+	 *
+	 * Items move from this list to either periodic_sched_inactive or
+	 * periodic_sched_ready when the channel associated with the transfer
+	 * is released. If the interval for the QH is 1, the item moves to
+	 * periodic_sched_ready because it must be rescheduled for the next
+	 * frame. Otherwise, the item moves to periodic_sched_inactive.
+	 */
+	dwc_list_link_t periodic_sched_queued;
+
+	/**
+	 * Total bandwidth claimed so far for periodic transfers. This value
+	 * is in microseconds per (micro)frame. The assumption is that all
+	 * periodic transfers may occur in the same (micro)frame.
+	 */
+	uint16_t periodic_usecs;
+
+	/**
+	 * Frame number read from the core at SOF. The value ranges from 0 to
+	 * DWC_HFNUM_MAX_FRNUM.
+	 */
+	uint16_t frame_number;
+
+	/**
+	 * Count of periodic QHs, if using several eps. For SOF enable/disable.
+	 */
+	uint16_t periodic_qh_count;
+
+	/**
+	 * Free host channels in the controller. This is a list of
+	 * dwc_hc_t items.
+	 */
+	struct hc_list free_hc_list;
+	/**
+	 * Number of host channels assigned to periodic transfers. Currently
+	 * assuming that there is a dedicated host channel for each periodic
+	 * transaction and at least one host channel available for
+	 * non-periodic transactions.
+	 */
+	int periodic_channels;
+
+	/**
+	 * Number of host channels assigned to non-periodic transfers.
+	 */
+	int non_periodic_channels;
+
+	/**
+	 * Array of pointers to the host channel descriptors. Allows accessing
+	 * a host channel descriptor given the host channel number. This is
+	 * useful in interrupt handlers.
+	 */
+	struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS];
+
+	/**
+	 * Buffer to use for any data received during the status phase of a
+	 * control transfer. Normally no data is transferred during the status
+	 * phase. This buffer is used as a bit bucket.
+	 */
+	uint8_t *status_buf;
+
+	/**
+	 * DMA address for status_buf.
+	 */
+	dma_addr_t status_buf_dma;
+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
+
+	/**
+	 * Connection timer. An OTG host must display a message if the device
+	 * does not connect. Started when the VBus power is turned on via
+	 * sysfs attribute "buspower".
+	 */
+	dwc_timer_t *conn_timer;
+
+	/* Tasket to do a reset */
+	//dwc_tasklet_t *reset_tasklet;
+
+	/*  */
+	dwc_spinlock_t *lock;
+
+	/**
+	 * Private data that could be used by OS wrapper.
+	 */
+	void *priv;
+
+	uint8_t otg_port;
+
+	/** Frame List */
+	uint32_t *frame_list;
+
+	/** Frame List DMA address */
+	dma_addr_t frame_list_dma;
+
+#ifdef OTGDEBUG
+	uint32_t frrem_samples;
+	uint64_t frrem_accum;
+
+	uint32_t hfnum_7_samples_a;
+	uint64_t hfnum_7_frrem_accum_a;
+	uint32_t hfnum_0_samples_a;
+	uint64_t hfnum_0_frrem_accum_a;
+	uint32_t hfnum_other_samples_a;
+	uint64_t hfnum_other_frrem_accum_a;
+
+	uint32_t hfnum_7_samples_b;
+	uint64_t hfnum_7_frrem_accum_b;
+	uint32_t hfnum_0_samples_b;
+	uint64_t hfnum_0_frrem_accum_b;
+	uint32_t hfnum_other_samples_b;
+	uint64_t hfnum_other_frrem_accum_b;
+#endif
+};
+
+/** @name Transaction Execution Functions */
+/** @{ */
+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t
+								  * hcd);
+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
+					   dwc_otg_transaction_type_e tr_type);
+
+/** @} */
+
+/** @name Interrupt Handler Functions */
+/** @{ */
+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *
+							 dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *
+							dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *
+							   dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *
+							   dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *
+							     dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd,
+					    uint32_t num);
+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *
+						       dwc_otg_hcd);
+/** @} */
+
+/** @name Schedule Queue Functions */
+/** @{ */
+
+/* Implemented in dwc_otg_hcd_queue.c */
+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
+					   dwc_otg_hcd_urb_t * urb, int atomic_alloc);
+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
+				      int sched_csplit);
+
+/** Remove and free a QH */
+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd,
+						  dwc_otg_qh_t * qh)
+{
+	dwc_irqflags_t flags;
+	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
+	dwc_otg_hcd_qh_remove(hcd, qh);
+	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
+	dwc_otg_hcd_qh_free(hcd, qh);
+}
+
+/** Allocates memory for a QH structure.
+ * @return Returns the memory allocate or NULL on error. */
+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc)
+{
+	if (atomic_alloc)
+		return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t));
+	else
+		return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t));
+}
+
+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb,
+					     int atomic_alloc);
+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb);
+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd,
+			       dwc_otg_qh_t ** qh, int atomic_alloc);
+
+/** Allocates memory for a QTD structure.
+ * @return Returns the memory allocate or NULL on error. */
+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc)
+{
+	if (atomic_alloc)
+		return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t));
+	else
+		return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t));
+}
+
+/** Frees the memory for a QTD structure.  QTD should already be removed from
+ * list.
+ * @param qtd QTD to free.*/
+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd)
+{
+	DWC_FREE(qtd);
+}
+
+/** Removes a QTD from list.
+ * @param hcd HCD instance.
+ * @param qtd QTD to remove from list.
+ * @param qh QTD belongs to.
+ */
+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd,
+					  dwc_otg_qtd_t * qtd,
+					  dwc_otg_qh_t * qh)
+{
+	DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
+}
+
+/** Remove and free a QTD 
+  * Need to disable IRQ and hold hcd lock while calling this function out of 
+  * interrupt servicing chain */
+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd,
+						   dwc_otg_qtd_t * qtd,
+						   dwc_otg_qh_t * qh)
+{
+	dwc_otg_hcd_qtd_remove(hcd, qtd, qh);
+	dwc_otg_hcd_qtd_free(qtd);
+}
+
+/** @} */
+
+/** @name Descriptor DMA Supporting Functions */
+/** @{ */
+
+extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
+					   dwc_hc_t * hc,
+					   dwc_otg_hc_regs_t * hc_regs,
+					   dwc_otg_halt_status_e halt_status);
+
+extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
+void reset_tasklet_func(void *data);
+
+/** @} */
+
+/** @name Internal Functions */
+/** @{ */
+dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb);
+/** @} */
+
+#ifdef CONFIG_USB_DWC_OTG_LPM
+extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd,
+					   uint8_t devaddr);
+extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd);
+#endif
+
+/** Gets the QH that contains the list_head */
+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
+
+/** Gets the QTD that contains the list_head */
+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
+
+/** Check if QH is non-periodic  */
+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \
+				     (_qh_ptr_->ep_type == UE_CONTROL))
+
+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+/** Packet size for any kind of endpoint descriptor */
+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
+
+/**
+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
+ * frame number when the max frame number is reached.
+ */
+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
+{
+	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
+	    (DWC_HFNUM_MAX_FRNUM >> 1);
+}
+
+/**
+ * Returns true if _frame1 is greater than _frame2. The comparison is done
+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
+ * number when the max frame number is reached.
+ */
+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
+{
+	return (frame1 != frame2) &&
+	    (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
+	     (DWC_HFNUM_MAX_FRNUM >> 1));
+}
+
+/**
+ * Increments _frame by the amount specified by _inc. The addition is done
+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
+ */
+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
+{
+	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
+}
+
+static inline uint16_t dwc_full_frame_num(uint16_t frame)
+{
+	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
+}
+
+static inline uint16_t dwc_micro_frame_num(uint16_t frame)
+{
+	return frame & 0x7;
+}
+
+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
+				  dwc_otg_hc_regs_t * hc_regs,
+				  dwc_otg_qtd_t * qtd);
+
+#ifdef OTGDEBUG
+/**
+ * Macro to sample the remaining PHY clocks left in the current frame. This
+ * may be used during debugging to determine the average time it takes to
+ * execute sections of code. There are two possible sample points, "a" and
+ * "b", so the _letter argument must be one of these values.
+ *
+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
+ * example, "cat /sys/devices/lm0/hcd_frrem".
+ */
+#define dwc_sample_frrem(_hcd, _qh, _letter) \
+{ \
+	hfnum_data_t hfnum; \
+	dwc_otg_qtd_t *qtd; \
+	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
+	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
+		hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
+		switch (hfnum.b.frnum & 0x7) { \
+		case 7: \
+			_hcd->hfnum_7_samples_##_letter++; \
+			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
+			break; \
+		case 0: \
+			_hcd->hfnum_0_samples_##_letter++; \
+			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
+			break; \
+		default: \
+			_hcd->hfnum_other_samples_##_letter++; \
+			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
+			break; \
+		} \
+	} \
+}
+#else
+#define dwc_sample_frrem(_hcd, _qh, _letter)
+#endif
+#endif
+#endif /* DWC_DEVICE_ONLY */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_hcd_if.h

@@ -0,0 +1,412 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
+ * $Revision: #12 $
+ * $Date: 2011/10/26 $
+ * $Change: 1873028 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+#ifndef DWC_DEVICE_ONLY
+#ifndef __DWC_HCD_IF_H__
+#define __DWC_HCD_IF_H__
+
+#include "dwc_otg_core_if.h"
+
+/** @file
+ * This file defines DWC_OTG HCD Core API.
+ */
+
+struct dwc_otg_hcd;
+typedef struct dwc_otg_hcd dwc_otg_hcd_t;
+
+struct dwc_otg_hcd_urb;
+typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t;
+
+/** @name HCD Function Driver Callbacks */
+/** @{ */
+
+/** This function is called whenever core switches to host mode. */
+typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd);
+
+/** This function is called when device has been disconnected */
+typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd);
+
+/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */
+typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
+						   void *urb_handle,
+						   uint32_t * hub_addr,
+						   uint32_t * port_addr);
+/** Via this function HCD core gets device speed */
+typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
+						void *urb_handle);
+
+/** This function is called when urb is completed */
+typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd,
+					      void *urb_handle,
+					      dwc_otg_hcd_urb_t * dwc_otg_urb,
+					      int32_t status);
+
+/** Via this function HCD core gets b_hnp_enable parameter */
+typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd);
+
+struct dwc_otg_hcd_function_ops {
+	dwc_otg_hcd_start_cb_t start;
+	dwc_otg_hcd_disconnect_cb_t disconnect;
+	dwc_otg_hcd_hub_info_from_urb_cb_t hub_info;
+	dwc_otg_hcd_speed_from_urb_cb_t speed;
+	dwc_otg_hcd_complete_urb_cb_t complete;
+	dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable;
+};
+/** @} */
+
+/** @name HCD Core API */
+/** @{ */
+/** This function allocates dwc_otg_hcd structure and returns pointer on it. */
+extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void);
+
+/** This function should be called to initiate HCD Core.
+ *
+ * @param hcd The HCD
+ * @param core_if The DWC_OTG Core
+ *
+ * Returns -DWC_E_NO_MEMORY if no enough memory.
+ * Returns 0 on success  
+ */
+extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if);
+
+/** Frees HCD
+ *
+ * @param hcd The HCD
+ */
+extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd);
+
+/** This function should be called on every hardware interrupt.
+ *
+ * @param dwc_otg_hcd The HCD
+ *
+ * Returns non zero if interrupt is handled
+ * Return 0 if interrupt is not handled
+ */
+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
+
+/**
+ * Returns private data set by
+ * dwc_otg_hcd_set_priv_data function.
+ *
+ * @param hcd The HCD
+ */
+extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd);
+
+/**
+ * Set private data.
+ *
+ * @param hcd The HCD
+ * @param priv_data pointer to be stored in private data
+ */
+extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data);
+
+/**
+ * This function initializes the HCD Core.
+ *
+ * @param hcd The HCD
+ * @param fops The Function Driver Operations data structure containing pointers to all callbacks.
+ *
+ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode.
+ * Returns 0 on success
+ */
+extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
+			     struct dwc_otg_hcd_function_ops *fops);
+
+/**
+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
+ * stopped. 
+ *
+ * @param hcd The HCD
+ */
+extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd);
+
+/**
+ * Handles hub class-specific requests.
+ *
+ * @param dwc_otg_hcd The HCD
+ * @param typeReq Request Type
+ * @param wValue wValue from control request
+ * @param wIndex wIndex from control request
+ * @param buf data buffer 
+ * @param wLength data buffer length
+ *
+ * Returns -DWC_E_INVALID if invalid argument is passed
+ * Returns 0 on success
+ */
+extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
+				   uint16_t typeReq, uint16_t wValue,
+				   uint16_t wIndex, uint8_t * buf,
+				   uint16_t wLength);
+
+/**
+ * Returns otg port number.
+ *
+ * @param hcd The HCD
+ */
+extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd);
+
+/**
+ * Returns OTG version - either 1.3 or 2.0.
+ *
+ * @param core_if The core_if structure pointer
+ */
+extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if);
+
+/**
+ * Returns 1 if currently core is acting as B host, and 0 otherwise.
+ *
+ * @param hcd The HCD
+ */
+extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd);
+
+/**
+ * Returns current frame number.
+ *
+ * @param hcd The HCD
+ */
+extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd);
+
+/**
+ * Dumps hcd state.
+ *
+ * @param hcd The HCD
+ */
+extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd);
+
+/**
+ * Dump the average frame remaining at SOF. This can be used to
+ * determine average interrupt latency. Frame remaining is also shown for
+ * start transfer and two additional sample points.
+ * Currently this function is not implemented.
+ *
+ * @param hcd The HCD
+ */
+extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd);
+
+/**
+ * Sends LPM transaction to the local device.
+ *
+ * @param hcd The HCD
+ * @param devaddr Device Address
+ * @param hird Host initiated resume duration
+ * @param bRemoteWake Value of bRemoteWake field in LPM transaction
+ *
+ * Returns negative value if sending LPM transaction was not succeeded.
+ * Returns 0 on success.
+ */
+extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr,
+				uint8_t hird, uint8_t bRemoteWake);
+
+/* URB interface */
+
+/**
+ * Allocates memory for dwc_otg_hcd_urb structure.
+ * Allocated memory should be freed by call of DWC_FREE.
+ *
+ * @param hcd The HCD
+ * @param iso_desc_count Count of ISOC descriptors
+ * @param atomic_alloc Specefies whether to perform atomic allocation.
+ */
+extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
+						int iso_desc_count,
+						int atomic_alloc);
+
+/**
+ * Set pipe information in URB.
+ *
+ * @param hcd_urb DWC_OTG URB
+ * @param devaddr Device Address
+ * @param ep_num Endpoint Number
+ * @param ep_type Endpoint Type
+ * @param ep_dir Endpoint Direction
+ * @param mps Max Packet Size
+ */
+extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb,
+					 uint8_t devaddr, uint8_t ep_num,
+					 uint8_t ep_type, uint8_t ep_dir,
+					 uint16_t mps);
+
+/* Transfer flags */
+#define URB_GIVEBACK_ASAP 0x1
+#define URB_SEND_ZERO_PACKET 0x2
+
+/**
+ * Sets dwc_otg_hcd_urb parameters.
+ *
+ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function.
+ * @param urb_handle Unique handle for request, this will be passed back
+ * to function driver in completion callback.
+ * @param buf The buffer for the data
+ * @param dma The DMA buffer for the data
+ * @param buflen Transfer length
+ * @param sp Buffer for setup data
+ * @param sp_dma DMA address of setup data buffer
+ * @param flags Transfer flags
+ * @param interval Polling interval for interrupt or isochronous transfers.
+ */
+extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb,
+				       void *urb_handle, void *buf,
+				       dwc_dma_t dma, uint32_t buflen, void *sp,
+				       dwc_dma_t sp_dma, uint32_t flags,
+				       uint16_t interval);
+
+/** Gets status from dwc_otg_hcd_urb
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ */
+extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb);
+
+/** Gets actual length from dwc_otg_hcd_urb
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ */
+extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t *
+						  dwc_otg_urb);
+
+/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ */
+extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t *
+						dwc_otg_urb);
+
+/** Set ISOC descriptor offset and length
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ * @param desc_num ISOC descriptor number
+ * @param offset Offset from beginig of buffer.
+ * @param length Transaction length
+ */
+extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
+						int desc_num, uint32_t offset,
+						uint32_t length);
+
+/** Get status of ISOC descriptor, specified by desc_num
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ * @param desc_num ISOC descriptor number 
+ */
+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t *
+						    dwc_otg_urb, int desc_num);
+
+/** Get actual length of ISOC descriptor, specified by desc_num
+ *
+ * @param dwc_otg_urb DWC_OTG URB
+ * @param desc_num ISOC descriptor number
+ */
+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
+							   dwc_otg_urb,
+							   int desc_num);
+
+/** Queue URB. After transfer is completes, the complete callback will be called with the URB status
+ *
+ * @param dwc_otg_hcd The HCD
+ * @param dwc_otg_urb DWC_OTG URB
+ * @param ep_handle Out parameter for returning endpoint handle
+ * @param atomic_alloc Flag to do atomic allocation if needed
+ *
+ * Returns -DWC_E_NO_DEVICE if no device is connected.
+ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
+ * Returns 0 on success.
+ */
+extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd,
+				   dwc_otg_hcd_urb_t * dwc_otg_urb,
+				   void **ep_handle, int atomic_alloc);
+
+/** De-queue the specified URB
+ *
+ * @param dwc_otg_hcd The HCD
+ * @param dwc_otg_urb DWC_OTG URB
+ */
+extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd,
+				   dwc_otg_hcd_urb_t * dwc_otg_urb);
+
+/** Frees resources in the DWC_otg controller related to a given endpoint.
+ * Any URBs for the endpoint must already be dequeued.
+ *
+ * @param hcd The HCD
+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
+ * @param retry Number of retries if there are queued transfers.
+ *
+ * Returns -DWC_E_INVALID if invalid arguments are passed.
+ * Returns 0 on success
+ */
+extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
+					int retry);
+
+/* Resets the data toggle in qh structure. This function can be called from
+ * usb_clear_halt routine.
+ *
+ * @param hcd The HCD
+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
+ *
+ * Returns -DWC_E_INVALID if invalid arguments are passed.
+ * Returns 0 on success
+ */
+extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle);
+
+/** Returns 1 if status of specified port is changed and 0 otherwise.
+ *
+ * @param hcd The HCD
+ * @param port Port number
+ */
+extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port);
+
+/** Call this function to check if bandwidth was allocated for specified endpoint.
+ * Only for ISOC and INTERRUPT endpoints.
+ *
+ * @param hcd The HCD
+ * @param ep_handle Endpoint handle
+ */
+extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd,
+					      void *ep_handle);
+
+/** Call this function to check if bandwidth was freed for specified endpoint.
+ *
+ * @param hcd The HCD
+ * @param ep_handle Endpoint handle
+ */
+extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle);
+
+/** Returns bandwidth allocated for specified endpoint in microseconds.
+ * Only for ISOC and INTERRUPT endpoints.
+ *
+ * @param hcd The HCD
+ * @param ep_handle Endpoint handle
+ */
+extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd,
+					    void *ep_handle);
+
+/** @} */
+
+#endif /* __DWC_HCD_IF_H__ */
+#endif /* DWC_DEVICE_ONLY */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_os_dep.h

@@ -0,0 +1,5 @@
+#ifndef _DWC_OS_DEP_H_
+#define _DWC_OS_DEP_H_
+#include "errno.h"
+
+#endif /* _DWC_OS_DEP_H_ */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_pcd.h

@@ -0,0 +1,268 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
+ * $Revision: #49 $
+ * $Date: 2013/05/16 $
+ * $Change: 2231774 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+#ifndef DWC_HOST_ONLY
+#if !defined(__DWC_PCD_H__)
+#define __DWC_PCD_H__
+
+#include "dwc_otg_os_dep.h"
+#include "usb.h"
+#include "dwc_otg_cil.h"
+#include "dwc_otg_pcd_if.h"
+struct cfiobject;
+
+/**
+ * @file
+ *
+ * This file contains the structures, constants, and interfaces for
+ * the Perpherial Contoller Driver (PCD).
+ *
+ * The Peripheral Controller Driver (PCD) for Linux will implement the
+ * Gadget API, so that the existing Gadget drivers can be used. For
+ * the Mass Storage Function driver the File-backed USB Storage Gadget
+ * (FBS) driver will be used.  The FBS driver supports the
+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
+ * transports.
+ *
+ */
+
+/** Invalid DMA Address */
+#define DWC_DMA_ADDR_INVALID	(~(dwc_dma_t)0)
+
+/** Max Transfer size for any EP */
+#define DDMA_MAX_TRANSFER_SIZE 65535
+
+/**
+ * Get the pointer to the core_if from the pcd pointer.
+ */
+#define GET_CORE_IF( _pcd ) (_pcd->core_if)
+
+/**
+ * States of EP0.
+ */
+typedef enum ep0_state {
+	EP0_DISCONNECT,		/* no host */
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+	EP0_IN_STATUS_PHASE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_STALL,
+} ep0state_e;
+
+/** Fordward declaration.*/
+struct dwc_otg_pcd;
+
+/** DWC_otg iso request structure.
+ *
+ */
+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
+
+#ifdef DWC_UTE_PER_IO
+
+/**
+ * This shall be the exact analogy of the same type structure defined in the
+ * usb_gadget.h. Each descriptor contains
+ */
+struct dwc_iso_pkt_desc_port {
+	uint32_t offset;
+	uint32_t length;	/* expected length */
+	uint32_t actual_length;
+	uint32_t status;
+};
+
+struct dwc_iso_xreq_port {
+	/** transfer/submission flag */
+	uint32_t tr_sub_flags;
+	/** Start the request ASAP */
+#define DWC_EREQ_TF_ASAP		0x00000002
+	/** Just enqueue the request w/o initiating a transfer */
+#define DWC_EREQ_TF_ENQUEUE		0x00000004
+
+	/**
+	* count of ISO packets attached to this request - shall
+	* not exceed the pio_alloc_pkt_count
+	*/
+	uint32_t pio_pkt_count;
+	/** count of ISO packets allocated for this request */
+	uint32_t pio_alloc_pkt_count;
+	/** number of ISO packet errors */
+	uint32_t error_count;
+	/** reserved for future extension */
+	uint32_t res;
+	/** Will be allocated and freed in the UTE gadget and based on the CFC value */
+	struct dwc_iso_pkt_desc_port *per_io_frame_descs;
+};
+#endif
+/** DWC_otg request structure.
+ * This structure is a list of requests.
+ */
+typedef struct dwc_otg_pcd_request {
+	void *priv;
+	void *buf;
+	dwc_dma_t dma;
+	uint32_t length;
+	uint32_t actual;
+	unsigned sent_zlp:1;
+    /**
+     * Used instead of original buffer if
+     * it(physical address) is not dword-aligned.
+     **/
+	uint8_t *dw_align_buf;
+	dwc_dma_t dw_align_buf_dma;
+
+	 DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry;
+#ifdef DWC_UTE_PER_IO
+	struct dwc_iso_xreq_port ext_req;
+	//void *priv_ereq_nport; /*  */
+#endif
+} dwc_otg_pcd_request_t;
+
+DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request);
+
+/**	  PCD EP structure.
+ * This structure describes an EP, there is an array of EPs in the PCD
+ * structure.
+ */
+typedef struct dwc_otg_pcd_ep {
+	/** USB EP Descriptor */
+	const usb_endpoint_descriptor_t *desc;
+
+	/** queue of dwc_otg_pcd_requests. */
+	struct req_list queue;
+	unsigned stopped:1;
+	unsigned disabling:1;
+	unsigned dma:1;
+	unsigned queue_sof:1;
+
+#ifdef DWC_EN_ISOC
+	/** ISOC req handle passed */
+	void *iso_req_handle;
+#endif				//_EN_ISOC_
+
+	/** DWC_otg ep data. */
+	dwc_ep_t dwc_ep;
+
+	/** Pointer to PCD */
+	struct dwc_otg_pcd *pcd;
+
+	void *priv;
+} dwc_otg_pcd_ep_t;
+
+/** DWC_otg PCD Structure.
+ * This structure encapsulates the data for the dwc_otg PCD.
+ */
+struct dwc_otg_pcd {
+	const struct dwc_otg_pcd_function_ops *fops;
+	/** The DWC otg device pointer */
+	struct dwc_otg_device *otg_dev;
+	/** Core Interface */
+	dwc_otg_core_if_t *core_if;
+	/** State of EP0 */
+	ep0state_e ep0state;
+	/** EP0 Request is pending */
+	unsigned ep0_pending:1;
+	/** Indicates when SET CONFIGURATION Request is in process */
+	unsigned request_config:1;
+	/** The state of the Remote Wakeup Enable. */
+	unsigned remote_wakeup_enable:1;
+	/** The state of the B-Device HNP Enable. */
+	unsigned b_hnp_enable:1;
+	/** The state of A-Device HNP Support. */
+	unsigned a_hnp_support:1;
+	/** The state of the A-Device Alt HNP support. */
+	unsigned a_alt_hnp_support:1;
+	/** Count of pending Requests */
+	unsigned request_pending;
+
+	/** SETUP packet for EP0
+	 * This structure is allocated as a DMA buffer on PCD initialization
+	 * with enough space for up to 3 setup packets.
+	 */
+	union {
+		usb_device_request_t req;
+		uint32_t d32[2];
+	} *setup_pkt;
+
+	dwc_dma_t setup_pkt_dma_handle;
+
+	/* Additional buffer and flag for CTRL_WR premature case */
+	uint8_t *backup_buf;
+	unsigned data_terminated;
+
+	/** 2-byte dma buffer used to return status from GET_STATUS */
+	uint16_t *status_buf;
+	dwc_dma_t status_buf_dma_handle;
+
+	/** EP0 */
+	dwc_otg_pcd_ep_t ep0;
+
+	/** Array of IN EPs. */
+	dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1];
+	/** Array of OUT EPs. */
+	dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1];
+	/** number of valid EPs in the above array. */
+//        unsigned      num_eps : 4;
+	dwc_spinlock_t *lock;
+
+	/** Tasklet to defer starting of TEST mode transmissions until
+	 *	Status Phase has been completed.
+	 */
+	dwc_tasklet_t *test_mode_tasklet;
+
+	/** Tasklet to delay starting of xfer in DMA mode */
+	dwc_tasklet_t *start_xfer_tasklet;
+
+	/** The test mode to enter when the tasklet is executed. */
+	unsigned test_mode;
+	/** The cfi_api structure that implements most of the CFI API
+	 * and OTG specific core configuration functionality
+	 */
+#ifdef DWC_UTE_CFI
+	struct cfiobject *cfi;
+#endif
+
+};
+
+//FIXME this functions should be static, and this prototypes should be removed
+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep);
+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep,
+				dwc_otg_pcd_request_t * req, int32_t status);
+
+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
+			    void *req_handle);
+extern void dwc_otg_pcd_start_iso_ddma(dwc_otg_core_if_t * core_if, 
+				dwc_otg_pcd_ep_t * ep);
+
+extern void do_test_mode(void *data);
+#endif
+#endif /* DWC_HOST_ONLY */

lib/fwlib/ram_lib/usb_otg/include/dwc_otg_pcd_if.h

@@ -0,0 +1,366 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
+ * $Revision: #13 $
+ * $Date: 2012/12/12 $
+ * $Change: 2125019 $
+ *
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
+ * otherwise expressly agreed to in writing between Synopsys and you.
+ *
+ * The Software IS NOT an item of Licensed Software or Licensed Product under
+ * any End User Software License Agreement or Agreement for Licensed Product
+ * with Synopsys or any supplement thereto. You are permitted to use and
+ * redistribute this Software in source and binary forms, with or without
+ * modification, provided that redistributions of source code must retain this
+ * notice. You may not view, use, disclose, copy or distribute this file or
+ * any information contained herein except pursuant to this license grant from
+ * Synopsys. If you do not agree with this notice, including the disclaimer
+ * below, then you are not authorized to use the Software.
+ *
+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ * ========================================================================== */
+#ifndef DWC_HOST_ONLY
+
+#if !defined(__DWC_PCD_IF_H__)
+#define __DWC_PCD_IF_H__
+
+//#include "dwc_os.h"
+#include "dwc_otg_core_if.h"
+
+/** @file
+ * This file defines DWC_OTG PCD Core API.
+ */
+
+struct dwc_otg_pcd;
+typedef struct dwc_otg_pcd dwc_otg_pcd_t;
+
+/** Maxpacket size for EP0 */
+#define MAX_EP0_SIZE	64
+/** Maxpacket size for any EP */
+#define MAX_PACKET_SIZE 2048
+
+/** @name Function Driver Callbacks */
+/** @{ */
+
+/** This function will be called whenever a previously queued request has
+ * completed.  The status value will be set to -DWC_E_SHUTDOWN to indicated a
+ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset,
+ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid
+ * parameters. */
+typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
+				    void *req_handle, int32_t status,
+				    uint32_t actual);
+/**
+ * This function will be called whenever a previousle queued ISOC request has
+ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count
+ * function.
+ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_*
+ * functions.
+ */
+typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
+					 void *req_handle, int proc_buf_num);
+/** This function should handle any SETUP request that cannot be handled by the
+ * PCD Core.  This includes most GET_DESCRIPTORs, SET_CONFIGS, Any
+ * class-specific requests, etc.  The function must non-blocking.
+ *
+ * Returns 0 on success.
+ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported.
+ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes.
+ * Returns -DWC_E_SHUTDOWN on any other error. */
+typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes);
+/** This is called whenever the device has been disconnected.  The function
+ * driver should take appropriate action to clean up all pending requests in the
+ * PCD Core, remove all endpoints (except ep0), and initialize back to reset
+ * state. */
+typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd);
+/** This function is called when device has been connected. */
+typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed);
+/** This function is called when device has been suspended */
+typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd);
+/** This function is called when device has received LPM tokens, i.e.
+ * device has been sent to sleep state. */
+typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd);
+/** This function is called when device has been resumed
+ * from suspend(L2) or L1 sleep state. */
+typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd);
+/** This function is called whenever hnp params has been changed.
+ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions
+ * to get hnp parameters. */
+typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd);
+/** This function is called whenever USB RESET is detected. */
+typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd);
+
+typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes);
+
+/**
+ *
+ * @param ep_handle	Void pointer to the usb_ep structure
+ * @param ereq_port Pointer to the extended request structure created in the
+ *					portable part.
+ */
+typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
+				     void *req_handle, int32_t status,
+				     void *ereq_port);
+/** Function Driver Ops Data Structure */
+struct dwc_otg_pcd_function_ops {
+	dwc_connect_cb_t connect;
+	dwc_disconnect_cb_t disconnect;
+	dwc_setup_cb_t setup;
+	dwc_completion_cb_t complete;
+	dwc_isoc_completion_cb_t isoc_complete;
+	dwc_suspend_cb_t suspend;
+	dwc_sleep_cb_t sleep;
+	dwc_resume_cb_t resume;
+	dwc_reset_cb_t reset;
+	dwc_hnp_params_changed_cb_t hnp_changed;
+	cfi_setup_cb_t cfi_setup;
+#ifdef DWC_UTE_PER_IO
+	xiso_completion_cb_t xisoc_complete;
+#endif
+};
+/** @} */
+
+/** @name Function Driver Functions */
+/** @{ */
+
+/** Call this function to get pointer on dwc_otg_pcd_t,
+ * this pointer will be used for all PCD API functions.
+ *
+ * @param core_if The DWC_OTG Core
+ */
+extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if);
+
+/** Frees PCD allocated by dwc_otg_pcd_init
+ *
+ * @param pcd The PCD
+ */
+extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd);
+
+/** Call this to bind the function driver to the PCD Core.
+ *
+ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function.
+ * @param fops The Function Driver Ops data structure containing pointers to all callbacks.
+ */
+extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
+			      const struct dwc_otg_pcd_function_ops *fops);
+
+/** Enables an endpoint for use.  This function enables an endpoint in
+ * the PCD.  The endpoint is described by the ep_desc which has the
+ * same format as a USB ep descriptor.  The ep_handle parameter is used to refer
+ * to the endpoint from other API functions and in callbacks.  Normally this
+ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the
+ * core for that interface.
+ *
+ * Returns -DWC_E_INVALID if invalid parameters were passed.
+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
+ * Returns 0 on success.
+ *
+ * @param pcd The PCD
+ * @param ep_desc Endpoint descriptor
+ * @param ep_handle Handle on endpoint, that will be used to identify endpoint.
+ */
+extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
+				 const uint8_t * ep_desc, void *ep_handle);
+
+/** Disable the endpoint referenced by ep_handle.
+ *
+ * Returns -DWC_E_INVALID if invalid parameters were passed.
+ * Returns -DWC_E_SHUTDOWN if any other error occurred.
+ * Returns 0 on success. */
+extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle);
+
+/** Queue a data transfer request on the endpoint referenced by ep_handle.
+ * After the transfer is completes, the complete callback will be called with
+ * the request status.
+ *
+ * @param pcd The PCD
+ * @param ep_handle The handle of the endpoint
+ * @param buf The buffer for the data
+ * @param dma_buf The DMA buffer for the data
+ * @param buflen The length of the data transfer
+ * @param zero Specifies whether to send zero length last packet.
+ * @param req_handle Set this handle to any value to use to reference this
+ * request in the ep_dequeue function or from the complete callback
+ * @param atomic_alloc If driver need to perform atomic allocations
+ * for internal data structures.
+ *
+ * Returns -DWC_E_INVALID if invalid parameters were passed.
+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
+ * Returns 0 on success. */
+extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
+				uint8_t * buf, dwc_dma_t dma_buf,
+				uint32_t buflen, int zero, void *req_handle,
+				int atomic_alloc);
+#ifdef DWC_UTE_PER_IO
+/**
+ *
+ * @param ereq_nonport	Pointer to the extended request part of the
+ *						usb_request structure defined in usb_gadget.h file.
+ */
+extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
+				     uint8_t * buf, dwc_dma_t dma_buf,
+				     uint32_t buflen, int zero,
+				     void *req_handle, int atomic_alloc,
+				     void *ereq_nonport);
+
+#endif
+
+/** De-queue the specified data transfer that has not yet completed.
+ *
+ * Returns -DWC_E_INVALID if invalid parameters were passed.
+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
+ * Returns 0 on success. */
+extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
+				  void *req_handle);
+
+/** Halt (STALL) an endpoint or clear it.
+ *
+ * Returns -DWC_E_INVALID if invalid parameters were passed.
+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
+ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later
+ * Returns 0 on success. */
+extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value);
+
+/** This function should be called on every hardware interrupt */
+extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd);
+
+/** This function returns current frame number */
+extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd);
+
+/**
+ * Start isochronous transfers on the endpoint referenced by ep_handle.
+ * For isochronous transfers duble buffering is used.
+ * After processing each of buffers comlete callback will be called with
+ * status for each transaction.
+ *
+ * @param pcd The PCD
+ * @param ep_handle The handle of the endpoint
+ * @param buf0 The virtual address of first data buffer
+ * @param buf1 The virtual address of second data buffer
+ * @param dma0 The DMA address of first data buffer
+ * @param dma1 The DMA address of second data buffer
+ * @param sync_frame Data pattern frame number
+ * @param dp_frame Data size for pattern frame
+ * @param data_per_frame Data size for regular frame
+ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP.
+ * @param buf_proc_intrvl Interval of ISOC Buffer processing
+ * @param req_handle Handle of ISOC request
+ * @param atomic_alloc Specefies whether to perform atomic allocation for
+ * 			internal data structures.
+ *
+ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function.
+ * Returns -DW_E_SHUTDOWN for any other error.
+ * Returns 0 on success
+ */
+extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
+				    uint8_t * buf0, uint8_t * buf1,
+				    dwc_dma_t dma0, dwc_dma_t dma1,
+				    int sync_frame, int dp_frame,
+				    int data_per_frame, int start_frame,
+				    int buf_proc_intrvl, void *req_handle,
+				    int atomic_alloc);
+
+/** Stop ISOC transfers on endpoint referenced by ep_handle.
+ *
+ * @param pcd The PCD
+ * @param ep_handle The handle of the endpoint
+ * @param req_handle Handle of ISOC request
+ *
+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function
+ * Returns 0 on success
+ */
+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
+			    void *req_handle);
+
+/** Get ISOC packet status.
+ *
+ * @param pcd The PCD
+ * @param ep_handle The handle of the endpoint
+ * @param iso_req_handle Isochronoush request handle
+ * @param packet Number of packet
+ * @param status Out parameter for returning status
+ * @param actual Out parameter for returning actual length
+ * @param offset Out parameter for returning offset
+ *
+ */
+extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd,
+					      void *ep_handle,
+					      void *iso_req_handle, int packet,
+					      int *status, int *actual,
+					      int *offset);
+
+/** Get ISOC packet count.
+ *
+ * @param pcd The PCD
+ * @param ep_handle The handle of the endpoint
+ * @param iso_req_handle
+ */
+extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd,
+					    void *ep_handle,
+					    void *iso_req_handle);
+
+/** This function starts the SRP Protocol if no session is in progress. If
+ * a session is already in progress, but the device is suspended,
+ * remote wakeup signaling is started.
+ */
+extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd);
+
+/** This function returns 1 if LPM support is enabled, and 0 otherwise. */
+extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd);
+
+/** This function returns 1 if LPM Errata support is enabled, and 0 otherwise. */
+extern int dwc_otg_pcd_is_besl_enabled(dwc_otg_pcd_t * pcd);
+
+/** This function returns baseline_besl module parametr. */
+extern int dwc_otg_pcd_get_param_baseline_besl(dwc_otg_pcd_t * pcd);
+
+/** This function returns deep_besl module parametr. */
+extern int dwc_otg_pcd_get_param_deep_besl(dwc_otg_pcd_t * pcd);
+
+/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */
+extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd);
+
+/** Initiate SRP */
+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd);
+
+/** Starts remote wakeup signaling. */
+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set);
+
+/** Starts micorsecond soft disconnect. */
+extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs);
+/** This function returns whether device is dualspeed.*/
+extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd);
+
+/** This function returns whether device is otg. */
+extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd);
+
+/** These functions allow to get hnp parameters */
+extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd);
+extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd);
+extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd);
+
+/** CFI specific Interface functions */
+/** Allocate a cfi buffer */
+extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep,
+				     dwc_dma_t * addr, size_t buflen,
+				     int flags);
+
+/******************************************************************************/
+
+/** @} */
+
+#endif				/* __DWC_PCD_IF_H__ */
+
+#endif				/* DWC_HOST_ONLY */

lib/fwlib/ram_lib/usb_otg/include/errno.h

@@ -0,0 +1,149 @@
+#ifndef _GENERIC_ERRNO_H
+#define _GENERIC_ERRNO_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+#define	ECANCELED	125	/* Operation Canceled */
+#define	ENOKEY		126	/* Required key not available */
+#define	EKEYEXPIRED	127	/* Key has expired */
+#define	EKEYREVOKED	128	/* Key has been revoked */
+#define	EKEYREJECTED	129	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	130	/* Owner died */
+#define	ENOTRECOVERABLE	131	/* State not recoverable */
+
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
+#define EHWPOISON	133	/* Memory page has hardware error */
+
+
+#define ENOTSUPP        524     /* Operation is not supported */
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/hal_otg.h

@@ -0,0 +1,21 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _HAL_OTG_H_
+#define _HAL_OTG_H_
+
+#include "rtl8195a_otg.h"
+#include "dwc_otg_regs.h"
+
+
+
+
+
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/hcd.h

@@ -0,0 +1,164 @@
+#ifndef _HCD_H_
+#define _HCD_H_
+
+
+struct hc_driver {
+        const char      *description;   /* "ehci-hcd" etc */
+const char      *product_desc;  /* product/vendor string */
+size_t          hcd_priv_size;  /* size of private data */
+
+/* irq handler */
+//irqreturn_t     (*irq) (struct usb_hcd *hcd);
+
+int     flags;
+#define HCD_MEMORY      0x0001          /* HC regs use memory (else I/O) */
+#define HCD_LOCAL_MEM   0x0002          /* HC needs local memory */
+#define HCD_SHARED      0x0004          /* Two (or more) usb_hcds share HW */
+#define HCD_USB11       0x0010          /* USB 1.1 */
+#define HCD_USB2        0x0020          /* USB 2.0 */
+#define HCD_USB3        0x0040          /* USB 3.0 */
+#define HCD_MASK        0x0070
+
+        /* called to init HCD and root hub */
+        int     (*reset) (struct usb_hcd *hcd);
+        int     (*start) (struct usb_hcd *hcd);
+
+        /* NOTE:  these suspend/resume calls relate to the HC as
+         * a whole, not just the root hub; they're for PCI bus glue.
+         */
+        /* called after suspending the hub, before entering D3 etc */
+//        int     (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+        /* called after entering D0 (etc), before resuming the hub */
+//        int     (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+        /* cleanly make HCD stop writing memory and doing I/O */
+        void    (*stop) (struct usb_hcd *hcd);
+
+        /* shutdown HCD */
+  //      void    (*shutdown) (struct usb_hcd *hcd);
+
+        /* return current frame number */
+        int     (*get_frame_number) (struct usb_hcd *hcd);
+
+        /* manage i/o requests, device state */
+        int     (*urb_enqueue)(struct usb_hcd *hcd,
+                                struct urb *urb);//, gfp_t mem_flags);
+        int     (*urb_dequeue)(struct usb_hcd *hcd,
+                                struct urb *urb, int status);
+
+        /*
+         * (optional) these hooks allow an HCD to override the default DMA
+         * mapping and unmapping routines.  In general, they shouldn't be
+         * necessary unless the host controller has special DMA requirements,
+         * such as alignment contraints.  If these are not specified, the
+         * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+         * (and it may be a good idea to call these functions in your HCD
+         * implementation)
+         */
+         #if 0
+        int     (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+                                   gfp_t mem_flags);
+        void    (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+        #endif
+        /* hw synch, freeing endpoint resources that urb_dequeue can't */
+        void    (*endpoint_disable)(struct usb_hcd *hcd,
+                        struct usb_host_endpoint *ep);
+
+        /* (optional) reset any endpoint state such as sequence number
+           and current window */
+        void    (*endpoint_reset)(struct usb_hcd *hcd,
+                        struct usb_host_endpoint *ep);
+
+        /* root hub support */
+        int     (*hub_status_data) (struct usb_hcd *hcd, char *buf);
+        int     (*hub_control) (struct usb_hcd *hcd,
+                                u16 typeReq, u16 wValue, u16 wIndex,
+                                char *buf, u16 wLength);
+        #if 0                        
+        int     (*bus_suspend)(struct usb_hcd *);
+        int     (*bus_resume)(struct usb_hcd *);
+        int     (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+                /* force handover of high-speed port to full-speed companion */
+        void    (*relinquish_port)(struct usb_hcd *, int);
+                /* has a port been handed over to a companion? */
+        int     (*port_handed_over)(struct usb_hcd *, int);
+
+                /* CLEAR_TT_BUFFER completion callback */
+        void    (*clear_tt_buffer_complete)(struct usb_hcd *,
+                                struct usb_host_endpoint *);
+
+        /* xHCI specific functions */
+                /* Called by usb_alloc_dev to alloc HC device structures */
+        int     (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+                /* Called by usb_disconnect to free HC device structures */
+        void    (*free_dev)(struct usb_hcd *, struct usb_device *);
+        /* Change a group of bulk endpoints to support multiple stream IDs */
+        int     (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+                struct usb_host_endpoint **eps, unsigned int num_eps,
+                unsigned int num_streams, gfp_t mem_flags);
+        /* Reverts a group of bulk endpoints back to not using stream IDs.
+         * Can fail if we run out of memory.
+         */
+        int     (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+                struct usb_host_endpoint **eps, unsigned int num_eps,
+                gfp_t mem_flags);
+
+        /* Bandwidth computation functions */
+        /* Note that add_endpoint() can only be called once per endpoint before
+         * check_bandwidth() or reset_bandwidth() must be called.
+         * drop_endpoint() can only be called once per endpoint also.
+         * A call to xhci_drop_endpoint() followed by a call to
+         * xhci_add_endpoint() will add the endpoint to the schedule with
+         * possibly new parameters denoted by a different endpoint descriptor
+         * in usb_host_endpoint.  A call to xhci_add_endpoint() followed by a
+         * call to xhci_drop_endpoint() is not allowed.
+         */
+                /* Allocate endpoint resources and add them to a new schedule */
+        int     (*add_endpoint)(struct usb_hcd *, struct usb_device *,
+                                struct usb_host_endpoint *);
+                /* Drop an endpoint from a new schedule */
+        int     (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+                                 struct usb_host_endpoint *);
+                /* Check that a new hardware configuration, set using
+                 * endpoint_enable and endpoint_disable, does not exceed bus
+                 * bandwidth.  This must be called before any set configuration
+                 * or set interface requests are sent to the device.
+                 */
+        int     (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+                /* Reset the device schedule to the last known good schedule,
+                 * which was set from a previous successful call to
+                 * check_bandwidth().  This reverts any add_endpoint() and
+                 * drop_endpoint() calls since that last successful call.
+                 * Used for when a check_bandwidth() call fails due to resource
+                 * or bandwidth constraints.
+                 */
+        void    (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+                /* Returns the hardware-chosen device address */
+        int     (*address_device)(struct usb_hcd *, struct usb_device *udev);
+                /* Notifies the HCD after a hub descriptor is fetched.
+                 * Will block.
+                 */
+        int     (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+                        struct usb_tt *tt, gfp_t mem_flags);
+        int     (*reset_device)(struct usb_hcd *, struct usb_device *);
+                /* Notifies the HCD after a device is connected and its
+                 * address is set
+                 */
+        int     (*update_device)(struct usb_hcd *, struct usb_device *);
+        int     (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+        /* USB 3.0 Link Power Management */
+                /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+        int     (*enable_usb3_lpm_timeout)(struct usb_hcd *,
+                        struct usb_device *, enum usb3_link_state state);
+                /* The xHCI host controller can still fail the command to
+                 * disable the LPM timeouts, so this can return an error code.
+                 */
+        int     (*disable_usb3_lpm_timeout)(struct usb_hcd *,
+                        struct usb_device *, enum usb3_link_state state);
+        int     (*find_raw_port_number)(struct usb_hcd *, int);
+        #endif
+};
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/rtl8195a_otg.h

@@ -0,0 +1,99 @@
+
+#ifndef _RTL8195A_OTG_H_
+#define _RTL8195A_OTG_H_
+
+#include "dwc_otg_core_if.h"
+#include "rtl8195a.h"
+
+#define HAL_OTG_READ32(addr)            HAL_READ32(USB_OTG_REG_BASE, (u32)addr)
+#define HAL_OTG_WRITE32(addr, value)    HAL_WRITE32(USB_OTG_REG_BASE, (u32)addr, value)
+
+#define HAL_OTG_MODIFY32(addr, clrmsk, setmsk)     HAL_WRITE32(USB_OTG_REG_BASE,(u32)addr,\
+                                                   ((HAL_READ32(USB_OTG_REG_BASE, (u32)addr) & (~clrmsk)) | setmsk))
+
+#define DWC_READ_REG32(_reg_)   HAL_OTG_READ32((u32)_reg_)
+#define DWC_WRITE_REG32(_reg_, _val_)   HAL_OTG_WRITE32((u32)_reg_,_val_)
+#define DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_)   HAL_OTG_MODIFY32((u32)_reg_,_cmsk_,_smsk_)
+
+
+//This part is added for RTK power sequence
+#if 1
+//3 SYS_ON reg
+
+//#define REG_SYS_FUNC_EN                     0x08
+#define BIT_SHIFT_SOC_SYSPEON_EN   4
+#define BIT_MASK_SOC_SYSPEON_EN    0x1
+#define BIT_SOC_SYSPEON_EN_OTG(x)(((x) & BIT_MASK_SOC_SYSPEON_EN) << BIT_SHIFT_SOC_SYSPEON_EN)
+#define BIT_INVC_SOC_SYSPEON_EN (~(BIT_MASK_SOC_SYSPEON_EN << BIT_SHIFT_SOC_SYSPEON_EN))
+
+
+//3 Peri_ON reg
+#define REG_OTG_PWCSEQ_OFFSET_OTG               0x40000000
+#define REG_OTG_PWCSEQ_PWC_OTG                  0x200
+#define REG_OTG_PWCSEQ_ISO_OTG                  0x204
+#define REG_SOC_HCI_COM_FUNC_EN_OTG             0x214
+#define REG_PESOC_HCI_CLK_CTRL0_OTG             0x240
+#endif
+
+//#define REG_PON_ISO_CTRL                        0x204
+
+
+#define REG_OTG_PWCSEQ_IP_OFF               0x30004     //This is in OTG IP
+
+//4 REG_OTG_PWCSEQ_PWC
+#define BIT_SHIFT_PWC_USBD_EN   0
+#define BIT_MASK_PWC_USBD_EN    0x1
+#define BIT_PWC_USBD_EN(x)(((x) & BIT_MASK_PWC_USBD_EN) << BIT_SHIFT_PWC_USBD_EN)
+#define BIT_INVC_PWC_USBD_EN (~(BIT_MASK_PWC_USBD_EN << BIT_SHIFT_PWC_USBD_EN))
+
+#define BIT_SHIFT_PWC_UPLV_EN   1
+#define BIT_MASK_PWC_UPLV_EN    0x1
+#define BIT_PWC_UPLV_EN(x)(((x) & BIT_MASK_PWC_UPLV_EN) << BIT_SHIFT_PWC_UPLV_EN)
+#define BIT_INVC_PWC_UPLV_EN (~(BIT_MASK_PWC_UPLV_EN << BIT_SHIFT_PWC_UPLV_EN))
+
+#define BIT_SHIFT_PWC_UPHV_EN   2
+#define BIT_MASK_PWC_UPHV_EN    0x1
+#define BIT_PWC_UPHV_EN(x)(((x) & BIT_MASK_PWC_UPHV_EN) << BIT_SHIFT_PWC_UPHV_EN)
+#define BIT_INVC_PWC_UPHV_EN (~(BIT_MASK_PWC_UPHV_EN << BIT_SHIFT_PWC_UPHV_EN))
+
+//4 REG_OTG_PWCSEQ_ISO
+#define BIT_SHIFT_ISO_USBD_EN   0
+#define BIT_MASK_ISO_USBD_EN    0x1
+#define BIT_ISO_USBD_EN(x)(((x) & BIT_MASK_ISO_USBD_EN) << BIT_SHIFT_ISO_USBD_EN)
+#define BIT_INVC_ISO_USBD_EN (~(BIT_MASK_ISO_USBD_EN << BIT_SHIFT_ISO_USBD_EN))
+
+#define BIT_SHIFT_ISO_USBA_EN   1
+#define BIT_MASK_ISO_USBA_EN    0x1
+#define BIT_ISO_USBA_EN(x)(((x) & BIT_MASK_ISO_USBA_EN) << BIT_SHIFT_ISO_USBA_EN)
+#define BIT_INVC_ISO_USBA_EN (~(BIT_MASK_ISO_USBA_EN << BIT_SHIFT_ISO_USBA_EN))
+
+//4 REG_SOC_HCI_COM_FUNC_EN
+#define BIT_SHIFT_SOC_HCI_OTG_EN   4
+#define BIT_MASK_SOC_HCI_OTG_EN    0x1
+#define BIT_SOC_HCI_OTG_EN_OTG(x)(((x) & BIT_MASK_SOC_HCI_OTG_EN) << BIT_SHIFT_SOC_HCI_OTG_EN)
+#define BIT_INVC_SOC_HCI_OTG_EN (~(BIT_MASK_SOC_HCI_OTG_EN << BIT_SHIFT_SOC_HCI_OTG_EN))
+
+//4 REG_PESOC_HCI_CLK_CTRL0
+#define BIT_SHIFT_SOC_ACTCK_OTG_EN   4
+#define BIT_MASK_SOC_ACTCK_OTG_EN    0x1
+#define BIT_SOC_ACTCK_OTG_EN_OTG(x)(((x) & BIT_MASK_SOC_ACTCK_OTG_EN) << BIT_SHIFT_SOC_ACTCK_OTG_EN)
+#define BIT_INVC_SOC_ACTCK_OTG_EN (~(BIT_MASK_SOC_ACTCK_OTG_EN << BIT_SHIFT_SOC_ACTCK_OTG_EN))
+
+
+//4 REG_OTG_PWCSEQ_OTG
+#define BIT_SHIFT_UPLL_CKRDY   5
+#define BIT_MASK_UPLL_CKRDY    0x1
+#define BIT_UPLL_CKRDY(x)(((x) & BIT_MASK_UPLL_CKRDY) << BIT_SHIFT_UPLL_CKRDY)
+#define BIT_INVC_UPLL_CKRDY (~(BIT_MASK_UPLL_CKRDY << BIT_SHIFT_UPLL_CKRDY))
+
+#define BIT_SHIFT_USBOTG_EN   8
+#define BIT_MASK_USBOTG_EN    0x1
+#define BIT_USBOTG_EN(x)(((x) & BIT_MASK_USBOTG_EN) << BIT_SHIFT_USBOTG_EN)
+#define BIT_INVC_USBOTG_EN (~(BIT_MASK_USBOTG_EN << BIT_SHIFT_USBOTG_EN))
+
+#define BIT_SHIFT_USBPHY_EN   9
+#define BIT_MASK_USBPHY_EN    0x1
+#define BIT_USBPHY_EN(x)(((x) & BIT_MASK_USBPHY_EN) << BIT_SHIFT_USBPHY_EN)
+#define BIT_INVC_USBPHY_EN (~(BIT_MASK_USBPHY_EN << BIT_SHIFT_USBPHY_EN))
+
+#endif

lib/fwlib/ram_lib/usb_otg/include/usb_ch9.h

@@ -0,0 +1,562 @@
+/*
+ * This file holds USB constants and structures that are needed for USB
+ * device APIs.  These are used by the USB device model, which is defined
+ * in chapter 9 of the USB 2.0 specification.  Linux has several APIs in C
+ * that need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device.  That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ */
+
+
+#ifndef _USB_CH9_H_
+#define _USB_CH9_H_
+
+//#include <linux/types.h>	/* __u8 etc */
+//#include "../otg/osk/sys-support.h"
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+//#define USB_DIR_OUT			0		/* to device */
+//#define USB_DIR_IN			0x80		/* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK			(0x03 << 5)
+#define USB_TYPE_STANDARD		(0x00 << 5)
+#define USB_TYPE_CLASS			(0x01 << 5)
+#define USB_TYPE_VENDOR			(0x02 << 5)
+#define USB_TYPE_RESERVED		(0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK			0x1f
+#define USB_RECIP_DEVICE		0x00
+#define USB_RECIP_INTERFACE		0x01
+#define USB_RECIP_ENDPOINT		0x02
+#define USB_RECIP_OTHER			0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 			0x04
+#define USB_RECIP_RPIPE 		0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS		0x00
+#define USB_REQ_CLEAR_FEATURE		0x01
+#define USB_REQ_SET_FEATURE		0x03
+#define USB_REQ_SET_ADDRESS		0x05
+#define USB_REQ_GET_DESCRIPTOR		0x06
+#define USB_REQ_SET_DESCRIPTOR		0x07
+#define USB_REQ_GET_CONFIGURATION	0x08
+#define USB_REQ_SET_CONFIGURATION	0x09
+#define USB_REQ_GET_INTERFACE		0x0A
+#define USB_REQ_SET_INTERFACE		0x0B
+#define USB_REQ_SYNCH_FRAME		0x0C
+
+#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION		0x0E
+#define USB_REQ_RPIPE_ABORT		0x0E
+#define USB_REQ_SET_HANDSHAKE		0x0F
+#define USB_REQ_RPIPE_RESET		0x0F
+#define USB_REQ_GET_HANDSHAKE		0x10
+#define USB_REQ_SET_CONNECTION		0x11
+#define USB_REQ_SET_SECURITY_DATA	0x12
+#define USB_REQ_GET_SECURITY_DATA	0x13
+#define USB_REQ_SET_WUSB_DATA		0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
+#define USB_REQ_LOOPBACK_DATA_READ	0x16
+#define USB_REQ_SET_INTERFACE_DS	0x17
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
+ * are at most sixteen features of each type.)
+ */
+#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
+#define USB_DEVICE_BATTERY		2	/* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
+
+#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
+
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device.  It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+	u8 bRequestType;
+	u8 bRequest;
+	u16 wValue;
+	u16 wIndex;
+	u16 wLength;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire".  But when exposed through Linux-USB APIs,
+ * they've been converted to cpu byte order.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE			0x01
+#define USB_DT_CONFIG			0x02
+#define USB_DT_STRING			0x03
+#define USB_DT_INTERFACE		0x04
+#define USB_DT_ENDPOINT			0x05
+#define USB_DT_DEVICE_QUALIFIER		0x06
+#define USB_DT_OTHER_SPEED_CONFIG	0x07
+#define USB_DT_INTERFACE_POWER		0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG			0x09
+#define USB_DT_DEBUG			0x0a
+#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY			0x0c
+#define USB_DT_KEY			0x0d
+#define USB_DT_ENCRYPTION_TYPE		0x0e
+#define USB_DT_BOS			0x0f
+#define USB_DT_DEVICE_CAPABILITY	0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
+#define USB_DT_WIRE_ADAPTER		0x21
+#define USB_DT_RPIPE			0x22
+
+/* conventional codes for class-specific descriptors */
+#define USB_DT_CS_DEVICE		0x21
+#define USB_DT_CS_CONFIG		0x22
+#define USB_DT_CS_STRING		0x23
+#define USB_DT_CS_INTERFACE		0x24
+#define USB_DT_CS_ENDPOINT		0x25
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+	u8  bLength;
+	u8  bDescriptorType;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 bcdUSB;
+	u8  bDeviceClass;
+	u8  bDeviceSubClass;
+	u8  bDeviceProtocol;
+	u8  bMaxPacketSize0;
+	u16 idVendor;
+	u16 idProduct;
+	u16 bcdDevice;
+	u8  iManufacturer;
+	u8  iProduct;
+	u8  iSerialNumber;
+	u8  bNumConfigurations;
+};
+
+#define USB_DT_DEVICE_SIZE		18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
+#define USB_CLASS_AUDIO			1
+#define USB_CLASS_COMM			2
+#define USB_CLASS_HID			3
+#define USB_CLASS_PHYSICAL		5
+#define USB_CLASS_STILL_IMAGE		6
+#define USB_CLASS_PRINTER		7
+#define USB_CLASS_MASS_STORAGE		8
+#define USB_CLASS_HUB			9
+#define USB_CLASS_CDC_DATA		0x0a
+#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
+#define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
+#define USB_CLASS_APP_SPEC		0xfe
+#define USB_CLASS_VENDOR_SPEC		0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different.  Highspeed-capable devices can look
+ * different depending on what speed they're currently running.  Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 wTotalLength;
+	u8  bNumInterfaces;
+	u8  bConfigurationValue;
+	u8  iConfiguration;
+	u8  bmAttributes;
+	u8  bMaxPower;
+};
+
+#define USB_DT_CONFIG_SIZE		9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
+#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
+#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 wData[1];		/* UTF-16LE encoded */
+};
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  bInterfaceNumber;
+	u8  bAlternateSetting;
+	u8  bNumEndpoints;
+	u8  bInterfaceClass;
+	u8  bInterfaceSubClass;
+	u8  bInterfaceProtocol;
+	u8  iInterface;
+};
+
+#define USB_DT_INTERFACE_SIZE		9
+
+/*-------------------------------------------------------------------------*/
+
+/* Endpoint descriptor */
+struct usb_endpoint_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+	u8  bEndpointAddress;
+	u8  bmAttributes;
+	u16 wMaxPacketSize;
+	u8  bInterval;
+	u8  bRefresh;
+	u8  bSynchAddress;
+
+   	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+#define USB_DT_ENDPOINT_SIZE		7
+#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#if 0
+#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK		0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL	0
+#define USB_ENDPOINT_XFER_ISOC		1
+#define USB_ENDPOINT_XFER_BULK		2
+#define USB_ENDPOINT_XFER_INT		3
+#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 bcdUSB;
+	u8  bDeviceClass;
+	u8  bDeviceSubClass;
+	u8  bDeviceProtocol;
+	u8  bMaxPacketSize0;
+	u8  bNumConfigurations;
+	u8  bRESERVED;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  bmAttributes;	/* support for HNP, SRP, etc */
+};
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP		(1 << 0)
+#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	/* bulk endpoints with 8 byte maxpacket */
+	u8  bDebugInEndpoint;
+	u8  bDebugOutEndpoint;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  bFirstInterface;
+	u8  bInterfaceCount;
+	u8  bFunctionClass;
+	u8  bFunctionSubClass;
+	u8  bFunctionProtocol;
+	u8  iFunction;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY:  group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 wTotalLength;
+	u8  bNumEncryptionTypes;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  tTKID[3];
+	u8  bReserved;
+	u8  bKeyData[0];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  bEncryptionType;
+#define	USB_ENC_TYPE_UNSECURE		0
+#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
+#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
+#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
+	u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
+	u8  bAuthKeyIndex;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS:  group of wireless capabilities */
+struct usb_bos_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u16 wTotalLength;
+	u8  bNumDeviceCaps;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
+struct usb_dev_cap_header {
+	u8  bLength;
+	u8  bDescriptorType;
+	u8  bDevCapabilityType;
+};
+
+#define	USB_CAP_TYPE_WIRELESS_USB	1
+
+struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
+	u8  bLength;
+	u8  bDescriptorType;
+	u8  bDevCapabilityType;
+
+	u8  bmAttributes;
+#define	USB_WIRELESS_P2P_DRD		(1 << 1)
+#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
+#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
+#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
+#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
+	u16 wPHYRates;	/* bit rates, Mbps */
+#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
+#define	USB_WIRELESS_PHY_80		(1 << 1)
+#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
+#define	USB_WIRELESS_PHY_160		(1 << 3)
+#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
+#define	USB_WIRELESS_PHY_320		(1 << 5)
+#define	USB_WIRELESS_PHY_400		(1 << 6)
+#define	USB_WIRELESS_PHY_480		(1 << 7)
+	u8  bmTFITXPowerInfo;	/* TFI power levels */
+	u8  bmFFITXPowerInfo;	/* FFI power levels */
+	u16 bmBandGroup;
+	u8  bReserved;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+	u8  bLength;
+	u8  bDescriptorType;
+
+	u8  bMaxBurst;
+	u8  bMaxSequence;
+	u16 wMaxStreamDelay;
+	u16 wOverTheAirPacketSize;
+	u8  bOverTheAirInterval;
+	u8  bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO		0
+#define USB_ENDPOINT_SWITCH_SWITCH	1
+#define USB_ENDPOINT_SWITCH_SCALE	2
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys.  The handshake depends on a CC.
+ */
+struct usb_handshake {
+	u8 bMessageNumber;
+	u8 bStatus;
+	u8 tTKID[3];
+	u8 bReserved;
+	u8 CDID[16];
+	u8 nonce[16];
+	u8 MIC[8];
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+	u8 CHID[16];		/* persistent host id */
+	u8 CDID[16];		/* device id (unique w/in host context) */
+	u8 CK[16];		/* connection key */
+};
+
+/*-------------------------------------------------------------------------*/
+
+#if 1
+
+
+
+
+enum usb_device_state {
+	/* NOTATTACHED isn't in the USB spec, and this state acts
+	 * the same as ATTACHED ... but it's clearer this way.
+	 */
+	USB_STATE_NOTATTACHED = 0,
+
+	/* chapter 9 and authentication (wireless) device states */
+	USB_STATE_ATTACHED,
+	USB_STATE_POWERED,			/* wired */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
+	USB_STATE_RECONNECTING,			/* auth */
+	USB_STATE_DEFAULT,			/* limited function */
+	USB_STATE_ADDRESS,
+	USB_STATE_CONFIGURED,			/* most functions */
+
+	USB_STATE_SUSPENDED
+
+	/* NOTE:  there are actually four different SUSPENDED
+	 * states, returning to POWERED, DEFAULT, ADDRESS, or
+	 * CONFIGURED respectively when SOF tokens flow again.
+	 */
+};
+#endif
+#endif	/* __LINUX_USB_CH9_H */
+

lib/fwlib/ram_lib/usb_otg/include/usb_defs.h

@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+#ifndef _USB_DEFS_H_
+#define _USB_DEFS_H_
+/* USB constants */
+
+/* Device and/or Interface Class codes */
+#define USB_CLASS_PER_INTERFACE  0	/* for DeviceClass */
+#define USB_CLASS_AUDIO          1
+#define USB_CLASS_COMM           2
+#define USB_CLASS_HID            3
+#define USB_CLASS_PHYSICAL		5
+#define USB_CLASS_STILL_IMAGE		6
+
+#define USB_CLASS_PRINTER	       7
+#define USB_CLASS_MASS_STORAGE   8
+#define USB_CLASS_HUB            9
+#define USB_CLASS_CDC_DATA		0x0a
+
+#define USB_CLASS_DATA           10
+#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
+#define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
+#define USB_CLASS_APP_SPEC		0xfe
+
+#define USB_CLASS_VENDOR_SPEC    0xff
+
+/* some HID sub classes */
+#define USB_SUB_HID_NONE        0
+#define USB_SUB_HID_BOOT        1
+
+/* some UID Protocols */
+#define USB_PROT_HID_NONE       0
+#define USB_PROT_HID_KEYBOARD   1
+#define USB_PROT_HID_MOUSE      2
+
+
+/* Sub STORAGE Classes */
+#define US_SC_RBC              1		/* Typically, flash devices */
+#define US_SC_8020             2		/* CD-ROM */
+#define US_SC_QIC              3		/* QIC-157 Tapes */
+#define US_SC_UFI              4		/* Floppy */
+#define US_SC_8070             5		/* Removable media */
+#define US_SC_SCSI             6		/* Transparent */
+#define US_SC_MIN              US_SC_RBC
+#define US_SC_MAX              US_SC_SCSI
+
+/* STORAGE Protocols */
+#define US_PR_CB               1		/* Control/Bulk w/o interrupt */
+#define US_PR_CBI              0		/* Control/Bulk/Interrupt */
+#define US_PR_BULK             0x50		/* bulk only */
+
+/* USB types */
+#define USB_TYPE_STANDARD   (0x00 << 5)
+#define USB_TYPE_CLASS      (0x01 << 5)
+#define USB_TYPE_VENDOR     (0x02 << 5)
+#define USB_TYPE_RESERVED   (0x03 << 5)
+
+/* USB recipients */
+#define USB_RECIP_DEVICE      0x00
+#define USB_RECIP_INTERFACE   0x01
+#define USB_RECIP_ENDPOINT    0x02
+#define USB_RECIP_OTHER       0x03
+
+
+#define USB_DT_CS_DEVICE		0x21
+#define USB_DT_CS_CONFIG		0x22
+#define USB_DT_CS_STRING		0x23
+#define USB_DT_CS_INTERFACE		0x24
+#define USB_DT_CS_ENDPOINT		0x25
+
+
+/* USB directions */
+#define USB_DIR_OUT			0		/* to device */
+#define USB_DIR_IN			0x80		/* to host */
+
+#if 0
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, 
+	USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH,				/* usb 2.0 */
+};
+#else
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH,				/* usb 2.0 */
+	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
+};
+
+#endif
+/* Descriptor types */
+#define USB_DT_DEVICE        0x01
+#define USB_DT_CONFIG        0x02
+#define USB_DT_STRING        0x03
+#define USB_DT_INTERFACE     0x04
+#define USB_DT_ENDPOINT      0x05
+#define USB_DT_DEVICE_QUALIFIER		0x06
+#define USB_DT_OTHER_SPEED_CONFIG	0x07
+#define USB_DT_INTERFACE_POWER		0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG			0x09
+#define USB_DT_DEBUG			0x0a
+#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY			0x0c
+#define USB_DT_KEY			0x0d
+#define USB_DT_ENCRYPTION_TYPE		0x0e
+#define USB_DT_BOS			0x0f
+#define USB_DT_DEVICE_CAPABILITY	0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
+#define USB_DT_WIRE_ADAPTER		0x21
+#define USB_DT_RPIPE			0x22
+
+//#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+
+#define USB_DT_HID          (USB_TYPE_CLASS | 0x01)
+#define USB_DT_REPORT       (USB_TYPE_CLASS | 0x02)
+#define USB_DT_PHYSICAL     (USB_TYPE_CLASS | 0x03)
+#define USB_DT_HUB          (USB_TYPE_CLASS | 0x09)
+
+/* Descriptor sizes per descriptor type */
+#define USB_DT_DEVICE_SIZE      18
+#define USB_DT_CONFIG_SIZE      9
+#define USB_DT_INTERFACE_SIZE   9
+#define USB_DT_ENDPOINT_SIZE    7
+#define USB_DT_ENDPOINT_AUDIO_SIZE  9	/* Audio extension */
+#define USB_DT_HUB_NONVAR_SIZE  7
+#define USB_DT_HID_SIZE         9
+
+/* Endpoints */
+#define USB_ENDPOINT_NUMBER_MASK  0x0f	/* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK     0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL  0
+#define USB_ENDPOINT_XFER_ISOC     1
+#define USB_ENDPOINT_XFER_BULK     2
+#define USB_ENDPOINT_XFER_INT      3
+
+#define USB_ENDPOINT_HALT		   0	/* IN/OUT will STALL */
+
+/* USB Packet IDs (PIDs) */
+#define USB_PID_UNDEF_0             0xf0
+#define USB_PID_OUT                 0xe1
+#define USB_PID_ACK                 0xd2
+#define USB_PID_DATA0               0xc3
+#define USB_PID_UNDEF_4             0xb4
+#define USB_PID_SOF                 0xa5
+#define USB_PID_UNDEF_6             0x96
+#define USB_PID_UNDEF_7             0x87
+#define USB_PID_UNDEF_8             0x78
+#define USB_PID_IN                  0x69
+#define USB_PID_NAK                 0x5a
+#define USB_PID_DATA1               0x4b
+#define USB_PID_PREAMBLE            0x3c
+#define USB_PID_SETUP               0x2d
+#define USB_PID_STALL               0x1e
+#define USB_PID_UNDEF_F             0x0f
+
+/* Standard requests */
+#define USB_REQ_GET_STATUS          0x00
+#define USB_REQ_CLEAR_FEATURE       0x01
+#define USB_REQ_SET_FEATURE         0x03
+#define USB_REQ_SET_ADDRESS         0x05
+#define USB_REQ_GET_DESCRIPTOR      0x06
+#define USB_REQ_SET_DESCRIPTOR      0x07
+#define USB_REQ_GET_CONFIGURATION   0x08
+#define USB_REQ_SET_CONFIGURATION   0x09
+#define USB_REQ_GET_INTERFACE       0x0A
+#define USB_REQ_SET_INTERFACE       0x0B
+#define USB_REQ_SYNCH_FRAME         0x0C
+
+/* HID requests */
+#define USB_REQ_GET_REPORT          0x01
+#define USB_REQ_GET_IDLE            0x02
+#define USB_REQ_GET_PROTOCOL        0x03
+#define USB_REQ_SET_REPORT          0x09
+#define USB_REQ_SET_IDLE            0x0A
+#define USB_REQ_SET_PROTOCOL        0x0B
+
+
+/* "pipe" definitions */
+
+#define PIPE_ISOCHRONOUS    0
+#define PIPE_INTERRUPT      1
+#define PIPE_CONTROL        2
+#define PIPE_BULK           3
+#define PIPE_DEVEP_MASK     0x0007ff00
+
+#define USB_ISOCHRONOUS    0
+#define USB_INTERRUPT      1
+#define USB_CONTROL        2
+#define USB_BULK           3
+
+/* USB-status codes: */
+#define USB_ST_ACTIVE           0x1		/* TD is active */
+#define USB_ST_STALLED          0x2		/* TD is stalled */
+#define USB_ST_BUF_ERR          0x4		/* buffer error */
+#define USB_ST_BABBLE_DET       0x8		/* Babble detected */
+#define USB_ST_NAK_REC          0x10	/* NAK Received*/
+#define USB_ST_CRC_ERR          0x20	/* CRC/timeout Error */
+#define USB_ST_BIT_ERR          0x40	/* Bitstuff error */
+#define USB_ST_NOT_PROC         0x80000000L	/* Not yet processed */
+
+
+/*************************************************************************
+ * Hub defines
+ */
+
+/*
+ * Hub request types
+ */
+
+#define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+/*
+ * Hub Class feature numbers
+ */
+#define C_HUB_LOCAL_POWER   0
+#define C_HUB_OVER_CURRENT  1
+
+/*
+ * Port feature numbers
+ */
+#define USB_PORT_FEAT_CONNECTION     0
+#define USB_PORT_FEAT_ENABLE         1
+#define USB_PORT_FEAT_SUSPEND        2
+#define USB_PORT_FEAT_OVER_CURRENT   3
+#define USB_PORT_FEAT_RESET          4
+#define USB_PORT_FEAT_POWER          8
+#define USB_PORT_FEAT_LOWSPEED       9
+#define USB_PORT_FEAT_HIGHSPEED      10
+#define USB_PORT_FEAT_C_CONNECTION   16
+#define USB_PORT_FEAT_C_ENABLE       17
+#define USB_PORT_FEAT_C_SUSPEND      18
+#define USB_PORT_FEAT_C_OVER_CURRENT 19
+#define USB_PORT_FEAT_C_RESET        20
+
+/* wPortStatus bits */
+#define USB_PORT_STAT_CONNECTION    0x0001
+#define USB_PORT_STAT_ENABLE        0x0002
+#define USB_PORT_STAT_SUSPEND       0x0004
+#define USB_PORT_STAT_OVERCURRENT   0x0008
+#define USB_PORT_STAT_RESET         0x0010
+#define USB_PORT_STAT_POWER         0x0100
+#define USB_PORT_STAT_LOW_SPEED     0x0200
+#define USB_PORT_STAT_HIGH_SPEED    0x0400	/* support for EHCI */
+#define USB_PORT_STAT_SPEED	\
+	(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
+
+/* wPortChange bits */
+#define USB_PORT_STAT_C_CONNECTION  0x0001
+#define USB_PORT_STAT_C_ENABLE      0x0002
+#define USB_PORT_STAT_C_SUSPEND     0x0004
+#define USB_PORT_STAT_C_OVERCURRENT 0x0008
+#define USB_PORT_STAT_C_RESET       0x0010
+
+/* wHubCharacteristics (masks) */
+#define HUB_CHAR_LPSM               0x0003
+#define HUB_CHAR_COMPOUND           0x0004
+#define HUB_CHAR_OCPM               0x0018
+
+/*
+ *Hub Status & Hub Change bit masks
+ */
+#define HUB_STATUS_LOCAL_POWER	0x0001
+#define HUB_STATUS_OVERCURRENT	0x0002
+
+#define HUB_CHANGE_LOCAL_POWER	0x0001
+#define HUB_CHANGE_OVERCURRENT	0x0002
+
+/* Struct USB_HCD defination */
+// for flags
+#define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
+#define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
+#define HCD_FLAG_DEAD			6	/* controller has died? */
+
+/* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+ */
+#define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+// for state
+#define	__ACTIVE		0x01
+#define	__SUSPEND		0x04
+#define	__TRANSIENT		0x80
+
+#define	HC_STATE_HALT		0
+#define	HC_STATE_RUNNING	(__ACTIVE)
+#define	HC_STATE_QUIESCING	(__SUSPEND|__TRANSIENT|__ACTIVE)
+#define	HC_STATE_RESUMING	(__SUSPEND|__TRANSIENT)
+#define	HC_STATE_SUSPENDED	(__SUSPEND)
+
+#define	HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define	HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
+#define USB_DEVICE_BATTERY		    2	/* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature		(0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature	(0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor	(0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus		(0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus		(0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature		(0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature		(0x2300 | USB_REQ_SET_FEATURE)
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
+#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
+#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
+
+#endif /*_USB_DEFS_H_ */

lib/fwlib/ram_lib/usb_otg/include/usb_gadget.h

@@ -0,0 +1,960 @@
+/*
+ * <linux/usb_gadget.h>
+ *
+ * We call the USB code inside a Linux-based peripheral device a "gadget"
+ * driver, except for the hardware-specific bus glue.  One USB host can
+ * master many USB gadgets, but the gadgets are only slaved to one host.
+ *
+ *
+ * (C) Copyright 2002-2004 by David Brownell
+ * All Rights Reserved.
+ *
+ * This software is licensed under the GNU GPL version 2.
+ */
+
+#ifndef __USB_GADGET_H
+#define __USB_GADGET_H
+
+//#include "xlinux.h"
+
+//#ifdef __KERNEL__
+#include "osdep_api.h"
+#include "usb_ch9.h"
+//#include "usb_gadget.h"
+#include "rtl8195a_otg_zero.h"
+//#include "../otg/lm.h"
+
+#if 1//defined(CONFIG_RTL_ULINKER)
+#include "usb_ulinker.h"
+#endif
+
+   
+#include "hal_util.h"
+#include "usb.h"
+   
+typedef unsigned  int   gfp_t;
+//struct usb_ep;
+/**
+ * struct usb_ep - device side representation of USB endpoint
+ * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @maxpacket:The maximum packet size used on this endpoint.  The initial
+ *	value can sometimes be reduced (hardware allowing), according to
+ *      the endpoint descriptor used to configure the endpoint.
+ * @driver_data:for use by the gadget driver.  all other fields are
+ * 	read-only to gadget drivers.
+ *
+ * the bus controller driver lists all the general purpose endpoints in
+ * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
+ * and is accessed only in response to a driver setup() callback.
+ */
+struct usb_ep {
+	void			*driver_data;
+
+	const char		*name;
+	const struct usb_ep_ops	*ops;
+	_LIST    ep_list;//ModifiedByJD    
+	unsigned		maxpacket:16;
+	const struct usb_endpoint_descriptor	*desc;
+};
+
+
+typedef void (*usb_req_complete_t)(struct usb_ep *, struct usb_request *);
+
+
+/**
+ * struct usb_request - describes one i/o request
+ * @buf: Buffer used for data.  Always provide this; some controllers
+ * 	only use PIO, or don't use DMA for some endpoints.
+ * @dma: DMA address corresponding to 'buf'.  If you don't set this
+ * 	field, and the usb controller needs one, it is responsible
+ * 	for mapping and unmapping the buffer.
+ * @length: Length of that data
+ * @no_interrupt: If true, hints that no completion irq is needed.
+ *	Helpful sometimes with deep request queues that are handled
+ *	directly by DMA controllers.
+ * @zero: If true, when writing data, makes the last packet be "short"
+ *     by adding a zero length packet as needed;
+ * @short_not_ok: When reading data, makes short packets be
+ *     treated as errors (queue stops advancing till cleanup).
+ * @complete: Function called when request completes, so this request and
+ *	its buffer may be re-used.
+ *	Reads terminate with a short packet, or when the buffer fills,
+ *	whichever comes first.  When writes terminate, some data bytes
+ *	will usually still be in flight (often in a hardware fifo).
+ *	Errors (for reads or writes) stop the queue from advancing
+ *	until the completion function returns, so that any transfers
+ *	invalidated by the error may first be dequeued.
+ * @context: For use by the completion callback
+ * @list: For use by the gadget driver.
+ * @status: Reports completion code, zero or a negative errno.
+ * 	Normally, faults block the transfer queue from advancing until
+ * 	the completion callback returns.
+ * 	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ * 	or when the driver disabled the endpoint.
+ * @actual: Reports bytes transferred to/from the buffer.  For reads (OUT
+ * 	transfers) this may be less than the requested length.  If the
+ * 	short_not_ok flag is set, short reads are treated as errors
+ * 	even when status otherwise indicates successful completion.
+ * 	Note that for writes (IN transfers) some data bytes may still
+ * 	reside in a device-side FIFO when the request is reported as
+ *	complete.
+ *
+ * These are allocated/freed through the endpoint they're used with.  The
+ * hardware's driver can add extra per-request data to the memory it returns,
+ * which often avoids separate memory allocations (potential failures),
+ * later when the request is queued.
+ *
+ * Request flags affect request handling, such as whether a zero length
+ * packet is written (the "zero" flag), whether a short read should be
+ * treated as an error (blocking request queue advance, the "short_not_ok"
+ * flag), or hinting that an interrupt is not required (the "no_interrupt"
+ * flag, for use with deep request queues).
+ *
+ * Bulk endpoints can use any size buffers, and can also be used for interrupt
+ * transfers. interrupt-only endpoints can be much less functional.
+ */
+	// NOTE this is analagous to 'struct urb' on the host side,
+	// except that it's thinner and promotes more pre-allocation.
+
+struct usb_request {
+	void			*buf;
+	unsigned		length;
+	dma_addr_t		dma;
+
+	unsigned		no_interrupt:1;
+	unsigned		zero:1;
+	unsigned		short_not_ok:1;
+
+	usb_req_complete_t complete;
+	void			*context;
+	_LIST	list;//ModifiedByJD    
+
+	int			status;
+	unsigned		actual;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint-specific parts of the api to the usb controller hardware.
+ * unlike the urb model, (de)multiplexing layers are not required.
+ * (so this api could slash overhead if used on the host side...)
+ *
+ * note that device side usb controllers commonly differ in how many
+ * endpoints they support, as well as their capabilities.
+ */
+struct usb_ep_ops {
+	int (*enable) (struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc);
+	int (*disable) (struct usb_ep *ep);
+
+	struct usb_request *(*alloc_request) (struct usb_ep *ep,
+		gfp_t gfp_flags);
+	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
+
+	void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes,
+		dma_addr_t *dma, gfp_t gfp_flags);
+	void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma,
+		unsigned bytes);
+	// NOTE:  on 2.6, drivers may also use dma_map() and
+	// dma_sync_single_*() to directly manage dma overhead. 
+
+	int (*queue) (struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags);
+	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
+
+	int (*set_halt) (struct usb_ep *ep, int value);
+	int (*fifo_status) (struct usb_ep *ep);
+	void (*fifo_flush) (struct usb_ep *ep);
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ * 	drivers discover endpoints through the ep_list of a usb_gadget.
+ * @desc:descriptor for desired behavior.  caller guarantees this pointer
+ * 	remains valid until the endpoint is disabled; the data byte order
+ * 	is little-endian (usb-standard).
+ *
+ * when configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int
+usb_ep_enable (struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	return ep->ops->enable (ep, desc);
+}
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int
+usb_ep_disable (struct usb_ep *ep)
+{
+	return ep->ops->disable (ep);
+}
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+static inline struct usb_request *
+usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags)
+{
+	return ep->ops->alloc_request (ep, gfp_flags);
+}
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+static inline void
+usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
+{
+	ep->ops->free_request (ep, req);
+}
+#if 0
+/**
+ * usb_ep_alloc_buffer - allocate an I/O buffer
+ * @ep:the endpoint associated with the buffer
+ * @len:length of the desired buffer
+ * @dma:pointer to the buffer's DMA address; must be valid
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Returns a new buffer, or null if one could not be allocated.
+ * The buffer is suitably aligned for dma, if that endpoint uses DMA,
+ * and the caller won't have to care about dma-inconsistency
+ * or any hidden "bounce buffer" mechanism.  No additional per-request
+ * DMA mapping will be required for such buffers.
+ * Free it later with usb_ep_free_buffer().
+ *
+ * You don't need to use this call to allocate I/O buffers unless you
+ * want to make sure drivers don't incur costs for such "bounce buffer"
+ * copies or per-request DMA mappings.
+ */
+static inline void *
+usb_ep_alloc_buffer (struct usb_ep *ep, unsigned len, dma_addr_t *dma,
+	gfp_t gfp_flags)
+{
+	return ep->ops->alloc_buffer (ep, len, dma, gfp_flags);
+}
+
+/**
+ * usb_ep_free_buffer - frees an i/o buffer
+ * @ep:the endpoint associated with the buffer
+ * @buf:CPU view address of the buffer
+ * @dma:the buffer's DMA address
+ * @len:length of the buffer
+ *
+ * reverses the effect of usb_ep_alloc_buffer().
+ * caller guarantees the buffer will no longer be accessed
+ */
+static inline void
+usb_ep_free_buffer (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned len)
+{
+	ep->ops->free_buffer (ep, buf, dma, len);
+}
+#endif
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ * 	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transfering data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+static inline int
+usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags)
+{
+    DBG_8195A_OTG("%s, gfp_flags = %x\n",__func__, gfp_flags);
+	return ep->ops->queue (ep, req, gfp_flags);
+}
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * if the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned.
+ *
+ * note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb.  such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+static inline int usb_ep_dequeue (struct usb_ep *ep, struct usb_request *req)
+{
+	return ep->ops->dequeue (ep, req);
+}
+#if 0
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+static inline int
+usb_ep_set_halt (struct usb_ep *ep)
+{
+	return ep->ops->set_halt (ep, 1);
+}
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+static inline int
+usb_ep_clear_halt (struct usb_ep *ep)
+{
+	return ep->ops->set_halt (ep, 0);
+}
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+static inline int
+usb_ep_fifo_status (struct usb_ep *ep)
+{
+	if (ep->ops->fifo_status)
+		return ep->ops->fifo_status (ep);
+	else
+		return -EOPNOTSUPP;
+}
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+static inline void
+usb_ep_fifo_flush (struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush (ep);
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct usb_gadget - represents a usb slave device
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep0: Endpoint zero, used when reading or writing responses to
+ * 	driver setup() requests
+ * @ep_list: List of other endpoints supported by the device.
+ * @speed: Speed of current connection to USB host.
+ * @is_dualspeed: True if the controller supports both high and full speed
+ *	operation.  If it does, the gadget driver must also support both.
+ * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
+ *	gadget driver must provide a USB OTG descriptor.
+ * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
+ *	is in the Mini-AB jack, and HNP has been used to switch roles
+ *	so that the "A" device currently acts as A-Peripheral, not A-Host.
+ * @a_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	supports HNP at this port.
+ * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	only supports HNP on a different root port.
+ * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
+ *	enabled HNP support.
+ * @name: Identifies the controller hardware type.  Used in diagnostics
+ * 	and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ *
+ * Gadgets have a mostly-portable "gadget driver" implementing device
+ * functions, handling all usb configurations and interfaces.  Gadget
+ * drivers talk to hardware-specific code indirectly, through ops vectors.
+ * That insulates the gadget driver from hardware details, and packages
+ * the hardware endpoints through generic i/o queues.  The "usb_gadget"
+ * and "usb_ep" interfaces provide that insulation from the hardware.
+ *
+ * Except for the driver data, all fields in this structure are
+ * read-only to the gadget driver.  That driver data is part of the
+ * "driver model" infrastructure in 2.6 (and later) kernels, and for
+ * earlier systems is grouped in a similar structure that's not known
+ * to the rest of the kernel.
+ *
+ * Values of the three OTG device feature flags are updated before the
+ * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
+ * driver suspend() calls.  They are valid only when is_otg, and when the
+ * device is acting as a B-Peripheral (so is_a_peripheral is false).
+ */
+
+struct usb_gadget {
+	/* readonly to gadget driver */
+	const struct usb_gadget_ops	*ops;
+	struct usb_ep			*ep0;
+	_LIST		ep_list;	/* of usb_ep */ //ModifiedByJD    
+	enum usb_device_speed		speed;
+	enum usb_device_speed		max_speed;
+	unsigned			is_dualspeed:1;
+	unsigned			is_otg:1;
+	unsigned			is_a_peripheral:1;
+	unsigned			b_hnp_enable:1;
+	unsigned			a_hnp_support:1;
+	unsigned			a_alt_hnp_support:1;
+	const char			*name;
+	struct zero_dev			dev;
+    void                          *driver_data;
+    void 				*device;
+};
+
+
+
+//struct usb_gadget;
+
+/* the rest of the api to the controller hardware: device operations,
+ * which don't involve endpoints (or i/o).
+ */
+struct usb_gadget_ops {
+	int	(*get_frame)(struct usb_gadget *);
+	int	(*wakeup)(struct usb_gadget *);
+	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+	int	(*vbus_session) (struct usb_gadget *, int is_active);
+	int	(*vbus_draw) (struct usb_gadget *, unsigned mA);
+	int	(*pullup) (struct usb_gadget *, int is_on);
+	int	(*ioctl)(struct usb_gadget *,
+				unsigned code, unsigned long param);
+};
+
+
+#if 0 //wei add
+static inline void *
+dev_get_drvdata (struct device *dev)
+{
+	return dev->driver_data;
+}
+
+static inline void
+dev_set_drvdata (struct device *dev, void *data)
+{
+	dev->driver_data = data;
+}
+#endif
+#if 0
+static inline void set_gadget_data (struct usb_gadget *gadget, void *data)
+	{ dev_set_drvdata (gadget->dev, data); }
+//	{ gadget->dev->driver_data = data; }
+static inline void *get_gadget_data (struct usb_gadget *gadget)
+	{ return dev_get_drvdata (gadget->dev); }
+//	{ return  gadget->dev->driver_data;}
+#endif
+
+/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
+#define gadget_for_each_ep(tmp,gadget) \
+	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
+
+#if 0
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+static inline int usb_gadget_frame_number (struct usb_gadget *gadget)
+{
+	return gadget->ops->get_frame(gadget);
+}
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+static inline int usb_gadget_wakeup (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->wakeup)
+		return -EOPNOTSUPP;
+	return gadget->ops->wakeup (gadget);
+}
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_set_selfpowered (struct usb_gadget *gadget)
+{
+xprintf("%s %s[%d]\n",__FILE__,__FUNCTION__,__LINE__);
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered (gadget, 1);
+}
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_clear_selfpowered (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered (gadget, 0);
+}
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session (gadget, 1);
+}
+#endif
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	if (!gadget->ops->vbus_draw)
+		return -1;//ModifiedByJD    
+	return gadget->ops->vbus_draw (gadget, mA);
+}
+#if 0
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session (gadget, 0);
+}
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).  This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_connect (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup (gadget, 1);
+}
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_connect() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_gadget_disconnect (struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup (gadget, 0);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * struct usb_gadget_driver - driver for usb 'slave' devices
+ * @function: String describing the gadget's function
+ * @speed: Highest speed the driver handles.
+ * @bind: Invoked when the driver is bound to a gadget, usually
+ * 	after registering the driver.
+ * 	At that point, ep0 is fully initialized, and ep_list holds
+ * 	the currently-available endpoints.
+ * 	Called in a context that permits sleeping.
+ * @setup: Invoked for ep0 control requests that aren't handled by
+ * 	the hardware level driver. Most calls must be handled by
+ * 	the gadget driver, including descriptor and configuration
+ * 	management.  The 16 bit members of the setup data are in
+ * 	USB byte order. Called in_interrupt; this may not sleep.  Driver
+ *	queues a response to ep0, or returns negative to stall.
+ * @disconnect: Invoked after all transfers have been stopped,
+ * 	when the host is disconnected.  May be called in_interrupt; this
+ * 	may not sleep.  Some devices can't detect disconnect, so this might
+ *	not be called except as part of controller shutdown.
+ * @unbind: Invoked when the driver is unbound from a gadget,
+ * 	usually from rmmod (after a disconnect is reported).
+ * 	Called in a context that permits sleeping.
+ * @suspend: Invoked on USB suspend.  May be called in_interrupt.
+ * @resume: Invoked on USB resume.  May be called in_interrupt.
+ * @driver: Driver model state for this driver.
+ *
+ * Devices are disabled till a gadget driver successfully bind()s, which
+ * means the driver will handle setup() requests needed to enumerate (and
+ * meet "chapter 9" requirements) then do some useful work.
+ *
+ * If gadget->is_otg is true, the gadget driver must provide an OTG
+ * descriptor during enumeration, or else fail the bind() call.  In such
+ * cases, no USB traffic may flow until both bind() returns without
+ * having called usb_gadget_disconnect(), and the USB host stack has
+ * initialized.
+ *
+ * Drivers use hardware-specific knowledge to configure the usb hardware.
+ * endpoint addressing is only one of several hardware characteristics that
+ * are in descriptors the ep0 implementation returns from setup() calls.
+ *
+ * Except for ep0 implementation, most driver code shouldn't need change to
+ * run on top of different usb controllers.  It'll use endpoints set up by
+ * that ep0 implementation.
+ *
+ * The usb controller driver handles a few standard usb requests.  Those
+ * include set_address, and feature flags for devices, interfaces, and
+ * endpoints (the get_status, set_feature, and clear_feature requests).
+ *
+ * Accordingly, the driver's setup() callback must always implement all
+ * get_descriptor requests, returning at least a device descriptor and
+ * a configuration descriptor.  Drivers must make sure the endpoint
+ * descriptors match any hardware constraints. Some hardware also constrains
+ * other descriptors. (The pxa250 allows only configurations 1, 2, or 3).
+ *
+ * The driver's setup() callback must also implement set_configuration,
+ * and should also implement set_interface, get_configuration, and
+ * get_interface.  Setting a configuration (or interface) is where
+ * endpoints should be activated or (config 0) shut down.
+ *
+ * (Note that only the default control endpoint is supported.  Neither
+ * hosts nor devices generally support control traffic except to ep0.)
+ *
+ * Most devices will ignore USB suspend/resume operations, and so will
+ * not provide those callbacks.  However, some may need to change modes
+ * when the host is not longer directing those activities.  For example,
+ * local controls (buttons, dials, etc) may need to be re-enabled since
+ * the (remote) host can't do that any longer; or an error state might
+ * be cleared, to make the device behave identically whether or not
+ * power is maintained.
+ */
+struct usb_gadget_driver {
+	char			*function;
+	enum usb_device_speed	*speed;
+	int			(*bind)(struct usb_gadget *,
+                                        struct usb_gadget_driver *);
+	void			(*unbind)(struct usb_gadget *);
+	int			(*setup)(struct usb_gadget *,   const struct usb_ctrlrequest *);
+	//CommentedByJD    int         (*setup)(dwc_otg_pcd_t *, const struct usb_ctrlrequest *);//ModifiedByJD    
+	void			(*disconnect)(struct usb_gadget *);
+	void			(*suspend)(struct usb_gadget *);
+	void			(*resume)(struct usb_gadget *);
+
+	// FIXME support safe rmmod
+//	struct device_driver	*driver;
+	void *		driver;
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver modules register and unregister, as usual.
+ * these calls must be made in a context that can sleep.
+ *
+ * these will usually be implemented directly by the hardware-dependent
+ * usb bus interface driver, which will only support a single driver.
+ */
+
+/**
+ * usb_gadget_register_driver - register a gadget driver
+ * @driver:the driver being registered
+ *
+ * Call this in your gadget driver's module initialization function,
+ * to tell the underlying usb controller driver about your driver.
+ * The driver's bind() function will be called to bind it to a
+ * gadget before this registration call returns.  It's expected that
+ * the bind() functions will be in init sections.
+ * This function must be called in a context that can sleep.
+ */
+int usb_gadget_register_driver (struct usb_gadget_driver *driver);
+
+/**
+ * usb_gadget_unregister_driver - unregister a gadget driver
+ * @driver:the driver being unregistered
+ *
+ * Call this in your gadget driver's module cleanup function,
+ * to tell the underlying usb controller that your driver is
+ * going away.  If the controller is connected to a USB host,
+ * it will first disconnect().  The driver is also requested
+ * to unbind() and clean up any device state, before this procedure
+ * finally returns.  It's expected that the unbind() functions
+ * will in in exit sections, so may not be linked in some kernels.
+ * This function must be called in a context that can sleep.
+ */
+int usb_gadget_unregister_driver (struct usb_gadget_driver *driver);
+
+/**
+ * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
+ * @v: vector of descriptors
+ */
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+	RtlMfree((u8 *)v, sizeof(struct usb_descriptor_header));
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify dealing with string descriptors */
+
+/**
+ * struct usb_string - wraps a C string and its USB id
+ * @id:the (nonzero) ID for this string
+ * @s:the string, in UTF-8 encoding
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap a string
+ * together with its ID.
+ */
+struct usb_string {
+	u8			id;
+	const char		*s;
+};
+
+/**
+ * struct usb_gadget_strings - a set of USB strings in a given language
+ * @language:identifies the strings' language (0x0409 for en-us)
+ * @strings:array of strings with their ids
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap all the
+ * strings for a given language.
+ */
+struct usb_gadget_strings {
+	u16			language;	/* 0x0409 for en-us */
+	struct usb_string	*strings;
+};
+
+
+/**
+ * gadget_is_dualspeed - return true iff the hardware handles high speed
+ * @g: controller that might support both high and full speeds
+ */
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+	return g->max_speed >= USB_SPEED_HIGH;
+}
+#if 0
+/**
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+	return g->max_speed >= USB_SPEED_SUPER;
+}
+#endif
+/* put descriptor for string with that id into buf (buflen >= 256) */
+int usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify managing config descriptors */
+
+/* write vector of descriptors into buffer */
+int usb_descriptor_fillbuf(void *, unsigned,
+		const struct usb_descriptor_header **);
+
+/* build config descriptor from single descriptor vector */
+int usb_gadget_config_buf(const struct usb_config_descriptor *config,
+	void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+
+/*-------------------------------------------------------------------------*/
+
+static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
+	{ gadget->driver_data = data; }
+static inline void *get_gadget_data(struct usb_gadget *gadget)
+	{ return gadget->driver_data; }
+
+/* utility wrapping a simple endpoint selection policy */
+#if 1
+extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
+			struct usb_endpoint_descriptor *);// ULINKER_DEVINIT;
+
+extern void usb_ep_autoconfig_reset (struct usb_gadget *);// ULINKER_DEVINIT;
+#endif
+//#endif  /* __KERNEL__ */
+
+#endif	/* __LINUX_USB_GADGET_H */

lib/fwlib/ram_lib/usb_otg/include/usb_ulinker.h

@@ -0,0 +1,74 @@
+#ifndef __LINUX_USB_ULINKER_H
+#define __LINUX_USB_ULINKER_H
+
+//#include "linux/autoconf.h"
+
+//#ifndef CONFIG_RTL_ULINKER_CUSTOMIZATION
+#if 1//ModifiedByJD    
+#define ULINKER_ETHER_VID		0x0BDA
+#define ULINKER_ETHER_PID		0x8195
+#define ULINKER_MANUFACTURER    "Realtek Semicoonductor Corp."
+
+#define ULINKER_WINTOOLS_GUID               "1CACC490-055C-4035-A026-1DAB0BDA8196"
+#define ULINKER_WINTOOLS_DISPLAY_NAME       "Realtek RTL8196EU Universal Linker"
+#define ULINKER_WINTOOLS_CONTACT            "nicfae@realtek.com.tw"
+#define ULINKER_WINTOOLS_DISPLAY_VERSION    "v1.0.0.0"
+#define ULINKER_WINTOOLS_HELP_LINK          "http://www.realtek.com.tw"
+#define ULINKER_WINTOOLS_PUBLISHER          ULINKER_MANUFACTURER
+#define ULINKER_WINTOOLS_TARGET_DIR         ULINKER_WINTOOLS_DISPLAY_NAME
+#else
+#define ULINKER_ETHER_VID		CONFIG_RTL_ULINKER_VID
+#define ULINKER_ETHER_PID		CONFIG_RTL_ULINKER_PID
+#define ULINKER_STORAGE_VID		CONFIG_RTL_ULINKER_VID_S
+#define ULINKER_STORAGE_PID		CONFIG_RTL_ULINKER_PID_S
+#define ULINKER_MANUFACTURER    CONFIG_RTL_ULINKER_MANUFACTURE
+
+#define ULINKER_WINTOOLS_GUID               CONFIG_RTL_ULINKER_WINTOOLS_GUID
+#define ULINKER_WINTOOLS_DISPLAY_NAME       CONFIG_RTL_ULINKER_WINTOOLS_DISPLAY_NAME
+#define ULINKER_WINTOOLS_CONTACT            CONFIG_RTL_ULINKER_WINTOOLS_CONTACT
+#define ULINKER_WINTOOLS_DISPLAY_VERSION    CONFIG_RTL_ULINKER_WINTOOLS_DISPLAY_VERSION
+#define ULINKER_WINTOOLS_HELP_LINK          CONFIG_RTL_ULINKER_WINTOOLS_HELP_LINK
+#define ULINKER_WINTOOLS_PUBLISHER          ULINKER_MANUFACTURER
+#define ULINKER_WINTOOLS_TARGET_DIR         ULINKER_WINTOOLS_DISPLAY_NAME
+#endif
+
+//------------------------------------------------
+// if you don't have a specific PID for storage, don't change following define of storage mode.
+//
+// begin: don't change 
+#ifndef ULINKER_STORAGE_VID
+#define ULINKER_STORAGE_VID		0x0BDA
+#define ULINKER_STORAGE_PID		0x8197
+#endif
+
+#define ULINKER_STORAGE_VID_STR			"USB Ether "
+#define ULINKER_STORAGE_PID_DISK_STR	"Driver DISC"
+#define ULINKER_STORAGE_PID_CDROM_STR	"Driver CDROM"
+
+#define ULINKER_WINTOOLS_DRIVER_PATH        "Driver"
+// end: don't change 
+//------------------------------------------------
+
+
+//----------------------------------------------------------------------
+#if defined(CONFIG_RTL_ULINKER)
+
+#define ULINKER_DEVINIT
+#define ULINKER_DEVINITDATA
+#define ULINKER_DEVINITCONST
+#define ULINKER_DEVEXIT
+#define ULINKER_DEVEXITDATA
+#define ULINKER_DEVEXITCONST
+
+#else
+
+#define ULINKER_DEVINIT		__devinit
+#define ULINKER_DEVINITDATA	__devinitdata
+#define ULINKER_DEVINITCONST	__devinitconst
+#define ULINKER_DEVEXIT		__devexit
+#define ULINKER_DEVEXITDATA	__devexitdata
+#define ULINKER_DEVEXITCONST	__devexitconst
+
+#endif
+
+#endif	/* __LINUX_USB_ULINKER_H */

lib/fwlib/ram_lib/wlan/realtek/wlan_ram_map/rom/rom_wlan_ram_map.h

@@ -0,0 +1,9 @@
+#ifndef ROM_WLAN_RAM_MAP_H
+#define ROM_WLAN_RAM_MAP_H
+
+struct _rom_wlan_ram_map {
+	unsigned char * (*rtw_malloc)(unsigned int sz);
+	void (*rtw_mfree)(unsigned char *pbuf, unsigned int sz);
+};
+
+#endif	/* ROM_WLAN_RAM_MAP_H */

lib/fwlib/rtl8195a/rtl8195a.h

@@ -0,0 +1,157 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#ifndef _HAL_8195A_H_
+#define _HAL_8195A_H_
+
+#include "platform_autoconf.h"
+#include "basic_types.h"
+#include "section_config.h"
+#include "rtl8195a_sys_on.h"
+#include "rtl8195a_peri_on.h"
+#include "hal_platform.h"
+#include "hal_pinmux.h"
+#include "hal_api.h"
+#include "hal_peri_on.h"
+#include "hal_misc.h"
+#include "hal_irqn.h"
+#include "hal_vector_table.h"
+#include "hal_diag.h"
+#include "hal_spi_flash.h"
+#include "hal_timer.h"
+#include "hal_util.h"
+#include "hal_efuse.h"
+#include "hal_soc_ps_monitor.h"
+#include "diag.h"
+#include "hal_common.h"
+#include "hal_soc_ps_monitor.h"
+
+/* ----------------------------------------------------------------------------
+   -- Cortex M3 Core Configuration
+   ---------------------------------------------------------------------------- */
+
+/*!
+ * @addtogroup Cortex_Core_Configuration Cortex M0 Core Configuration
+ * @{
+ */
+
+#define __CM3_REV                      0x0200    /**< Core revision r0p0 */
+#define __MPU_PRESENT                  1         /**< Defines if an MPU is present or not */
+#define __NVIC_PRIO_BITS               4         /**< Number of priority bits implemented in the NVIC */
+#define __Vendor_SysTickConfig         1         /**< Vendor specific implementation of SysTickConfig is defined */
+
+#include "core_cm3.h"
+
+#ifdef CONFIG_TIMER_EN
+#include "hal_timer.h"
+#endif
+
+#ifdef CONFIG_GDMA_EN
+#include "hal_gdma.h"
+#include "rtl8195a_gdma.h"
+#endif
+
+#ifdef CONFIG_GPIO_EN
+#include "hal_gpio.h"
+#include "rtl8195a_gpio.h"
+#endif
+
+#ifdef CONFIG_SPI_COM_EN
+#include "hal_ssi.h"
+#include "rtl8195a_ssi.h"
+#endif
+
+#ifdef CONFIG_UART_EN
+#include "hal_uart.h"
+#include "rtl8195a_uart.h"
+#endif
+
+#ifdef CONFIG_I2C_EN
+#include "hal_i2c.h"
+#include "rtl8195a_i2c.h"
+#endif
+
+#ifdef CONFIG_PCM_EN
+#include "hal_pcm.h"
+#include "rtl8195a_pcm.h"
+#endif
+
+#ifdef CONFIG_PWM_EN
+#include "hal_pwm.h"
+#include "rtl8195a_pwm.h"
+#endif
+
+#ifdef CONFIG_I2S_EN
+#include "hal_i2s.h"
+#include "rtl8195a_i2s.h"
+#endif
+
+#ifdef CONFIG_DAC_EN
+#include "hal_dac.h"
+#include "rtl8195a_dac.h"
+#endif
+
+
+#include "hal_adc.h"
+#include "rtl8195a_adc.h"
+
+
+#ifdef CONFIG_SDR_EN
+#endif
+
+#ifdef CONFIG_SPIC_EN
+#endif
+
+#ifdef CONFIG_SDIO_DEVICE_EN
+#include "hal_sdio.h"
+#endif
+
+#ifdef CONFIG_NFC_EN
+#include "hal_nfc.h"
+#include "rtl8195a_nfc.h"
+#endif
+
+#ifdef CONFIG_WDG
+#include "rtl8195a_wdt.h"
+#endif
+
+#ifdef CONFIG_USB_EN
+#include "hal_usb.h"
+#include "rtl8195a_usb.h"
+#endif
+
+
+// firmware information, located at the header of Image2
+#define FW_VERSION          (0x0100)
+#define FW_SUBVERSION       (0x0001)
+#define FW_CHIP_ID          (0x8195)
+#define FW_CHIP_VER         (0x01)
+#define FW_BUS_TYPE         (0x01)          // the iNIC firmware type: USB/SDIO
+#define FW_INFO_RSV1        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV2        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV3        (0x00)          // the firmware information reserved
+#define FW_INFO_RSV4        (0x00)          // the firmware information reserved
+
+#define FLASH_RESERVED_DATA_BASE		0x8000  // reserve 32K for Image1
+#define FLASH_SYSTEM_DATA_ADDR			0x9000  // reserve 32K+4K for Image1 + Reserved data
+// Flash Map for Calibration data
+#define FLASH_CAL_DATA_BASE				0xA000
+#define FLASH_CAL_DATA_ADDR(_offset)	(FLASH_CAL_DATA_BASE + _offset)
+#define FLASH_CAL_DATA_SIZE				0x1000
+#define FLASH_SECTOR_SIZE				0x1000
+// SPIC Calibration Data
+#define FLASH_SPIC_PARA_OFFSET          0x80
+#define FLASH_SPIC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SPIC_PARA_OFFSET)
+// SDRC Calibration Data
+#define FLASH_SDRC_PARA_OFFSET          0x180
+#define FLASH_SDRC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SDRC_PARA_OFFSET)
+// ADC Calibration Data
+#define FLASH_ADC_PARA_OFFSET           0x200
+#define FLASH_ADC_PARA_BASE             (FLASH_SYSTEM_DATA_ADDR+FLASH_ADC_PARA_OFFSET)
+
+#endif //_HAL_8195A_H_

lib/fwlib/rtl8195a/rtl8195a_adc.h

@@ -0,0 +1,350 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_ADC_H_
+#define _RTL8195A_ADC_H_
+
+
+//================ Register Bit Field ==========================
+//2 REG_ADC_FIFO_READ
+
+#define BIT_SHIFT_ADC_FIFO_RO 0
+#define BIT_MASK_ADC_FIFO_RO 0xffffffffL
+#define BIT_ADC_FIFO_RO(x)                    	(((x) & BIT_MASK_ADC_FIFO_RO) << BIT_SHIFT_ADC_FIFO_RO)
+#define BIT_CTRL_ADC_FIFO_RO(x)               	(((x) & BIT_MASK_ADC_FIFO_RO) << BIT_SHIFT_ADC_FIFO_RO)
+#define BIT_GET_ADC_FIFO_RO(x)                	(((x) >> BIT_SHIFT_ADC_FIFO_RO) & BIT_MASK_ADC_FIFO_RO)
+
+
+//2 REG_ADC_CONTROL
+
+#define BIT_SHIFT_ADC_DBG_SEL 24
+#define BIT_MASK_ADC_DBG_SEL 0x7
+#define BIT_ADC_DBG_SEL(x)                    	(((x) & BIT_MASK_ADC_DBG_SEL) << BIT_SHIFT_ADC_DBG_SEL)
+#define BIT_CTRL_ADC_DBG_SEL(x)               	(((x) & BIT_MASK_ADC_DBG_SEL) << BIT_SHIFT_ADC_DBG_SEL)
+#define BIT_GET_ADC_DBG_SEL(x)                	(((x) >> BIT_SHIFT_ADC_DBG_SEL) & BIT_MASK_ADC_DBG_SEL)
+
+
+#define BIT_SHIFT_ADC_THRESHOLD 16
+#define BIT_MASK_ADC_THRESHOLD 0x3f
+#define BIT_ADC_THRESHOLD(x)                  	(((x) & BIT_MASK_ADC_THRESHOLD) << BIT_SHIFT_ADC_THRESHOLD)
+#define BIT_CTRL_ADC_THRESHOLD(x)             	(((x) & BIT_MASK_ADC_THRESHOLD) << BIT_SHIFT_ADC_THRESHOLD)
+#define BIT_GET_ADC_THRESHOLD(x)              	(((x) >> BIT_SHIFT_ADC_THRESHOLD) & BIT_MASK_ADC_THRESHOLD)
+
+
+#define BIT_SHIFT_ADC_BURST_SIZE 8
+#define BIT_MASK_ADC_BURST_SIZE 0x1f
+#define BIT_ADC_BURST_SIZE(x)                 	(((x) & BIT_MASK_ADC_BURST_SIZE) << BIT_SHIFT_ADC_BURST_SIZE)
+#define BIT_CTRL_ADC_BURST_SIZE(x)            	(((x) & BIT_MASK_ADC_BURST_SIZE) << BIT_SHIFT_ADC_BURST_SIZE)
+#define BIT_GET_ADC_BURST_SIZE(x)             	(((x) >> BIT_SHIFT_ADC_BURST_SIZE) & BIT_MASK_ADC_BURST_SIZE)
+
+#define BIT_ADC_ENDIAN                        	BIT(3)
+#define BIT_SHIFT_ADC_ENDIAN                  	3
+#define BIT_MASK_ADC_ENDIAN                   	0x1
+#define BIT_CTRL_ADC_ENDIAN(x)                	(((x) & BIT_MASK_ADC_ENDIAN) << BIT_SHIFT_ADC_ENDIAN)
+
+#define BIT_ADC_OVERWRITE                     	BIT(2)
+#define BIT_SHIFT_ADC_OVERWRITE               	2
+#define BIT_MASK_ADC_OVERWRITE                	0x1
+#define BIT_CTRL_ADC_OVERWRITE(x)             	(((x) & BIT_MASK_ADC_OVERWRITE) << BIT_SHIFT_ADC_OVERWRITE)
+
+#define BIT_ADC_ONESHOT                       	BIT(1)
+#define BIT_SHIFT_ADC_ONESHOT                 	1
+#define BIT_MASK_ADC_ONESHOT                  	0x1
+#define BIT_CTRL_ADC_ONESHOT(x)               	(((x) & BIT_MASK_ADC_ONESHOT) << BIT_SHIFT_ADC_ONESHOT)
+
+#define BIT_ADC_COMP_ONLY                     	BIT(0)
+#define BIT_SHIFT_ADC_COMP_ONLY               	0
+#define BIT_MASK_ADC_COMP_ONLY                	0x1
+#define BIT_CTRL_ADC_COMP_ONLY(x)             	(((x) & BIT_MASK_ADC_COMP_ONLY) << BIT_SHIFT_ADC_COMP_ONLY)
+
+
+//2 REG_ADC_INTR_EN
+#define BIT_ADC_AWAKE_CPU_EN                  	BIT(7)
+#define BIT_SHIFT_ADC_AWAKE_CPU_EN            	7
+#define BIT_MASK_ADC_AWAKE_CPU_EN             	0x1
+#define BIT_CTRL_ADC_AWAKE_CPU_EN(x)          	(((x) & BIT_MASK_ADC_AWAKE_CPU_EN) << BIT_SHIFT_ADC_AWAKE_CPU_EN)
+
+#define BIT_ADC_FIFO_RD_ERROR_EN              	BIT(6)
+#define BIT_SHIFT_ADC_FIFO_RD_ERROR_EN        	6
+#define BIT_MASK_ADC_FIFO_RD_ERROR_EN         	0x1
+#define BIT_CTRL_ADC_FIFO_RD_ERROR_EN(x)      	(((x) & BIT_MASK_ADC_FIFO_RD_ERROR_EN) << BIT_SHIFT_ADC_FIFO_RD_ERROR_EN)
+
+#define BIT_ADC_FIFO_RD_REQ_EN                	BIT(5)
+#define BIT_SHIFT_ADC_FIFO_RD_REQ_EN          	5
+#define BIT_MASK_ADC_FIFO_RD_REQ_EN           	0x1
+#define BIT_CTRL_ADC_FIFO_RD_REQ_EN(x)        	(((x) & BIT_MASK_ADC_FIFO_RD_REQ_EN) << BIT_SHIFT_ADC_FIFO_RD_REQ_EN)
+
+#define BIT_ADC_FIFO_FULL_EN                  	BIT(4)
+#define BIT_SHIFT_ADC_FIFO_FULL_EN            	4
+#define BIT_MASK_ADC_FIFO_FULL_EN             	0x1
+#define BIT_CTRL_ADC_FIFO_FULL_EN(x)          	(((x) & BIT_MASK_ADC_FIFO_FULL_EN) << BIT_SHIFT_ADC_FIFO_FULL_EN)
+
+#define BIT_ADC_COMP_3_EN                     	BIT(3)
+#define BIT_SHIFT_ADC_COMP_3_EN               	3
+#define BIT_MASK_ADC_COMP_3_EN                	0x1
+#define BIT_CTRL_ADC_COMP_3_EN(x)             	(((x) & BIT_MASK_ADC_COMP_3_EN) << BIT_SHIFT_ADC_COMP_3_EN)
+
+#define BIT_ADC_COMP_2_EN                     	BIT(2)
+#define BIT_SHIFT_ADC_COMP_2_EN               	2
+#define BIT_MASK_ADC_COMP_2_EN                	0x1
+#define BIT_CTRL_ADC_COMP_2_EN(x)             	(((x) & BIT_MASK_ADC_COMP_2_EN) << BIT_SHIFT_ADC_COMP_2_EN)
+
+#define BIT_ADC_COMP_1_EN                     	BIT(1)
+#define BIT_SHIFT_ADC_COMP_1_EN               	1
+#define BIT_MASK_ADC_COMP_1_EN                	0x1
+#define BIT_CTRL_ADC_COMP_1_EN(x)             	(((x) & BIT_MASK_ADC_COMP_1_EN) << BIT_SHIFT_ADC_COMP_1_EN)
+
+#define BIT_ADC_COMP_0_EN                     	BIT(0)
+#define BIT_SHIFT_ADC_COMP_0_EN               	0
+#define BIT_MASK_ADC_COMP_0_EN                	0x1
+#define BIT_CTRL_ADC_COMP_0_EN(x)             	(((x) & BIT_MASK_ADC_COMP_0_EN) << BIT_SHIFT_ADC_COMP_0_EN)
+
+
+//2 REG_ADC_INTR_STS
+#define BIT_ADC_FIFO_THRESHOLD                	BIT(7)
+#define BIT_SHIFT_ADC_FIFO_THRESHOLD          	7
+#define BIT_MASK_ADC_FIFO_THRESHOLD           	0x1
+#define BIT_CTRL_ADC_FIFO_THRESHOLD(x)        	(((x) & BIT_MASK_ADC_FIFO_THRESHOLD) << BIT_SHIFT_ADC_FIFO_THRESHOLD)
+
+#define BIT_ADC_FIFO_RD_ERROR_ST              	BIT(6)
+#define BIT_SHIFT_ADC_FIFO_RD_ERROR_ST        	6
+#define BIT_MASK_ADC_FIFO_RD_ERROR_ST         	0x1
+#define BIT_CTRL_ADC_FIFO_RD_ERROR_ST(x)      	(((x) & BIT_MASK_ADC_FIFO_RD_ERROR_ST) << BIT_SHIFT_ADC_FIFO_RD_ERROR_ST)
+
+#define BIT_ADC_FIFO_RD_REQ_ST                	BIT(5)
+#define BIT_SHIFT_ADC_FIFO_RD_REQ_ST          	5
+#define BIT_MASK_ADC_FIFO_RD_REQ_ST           	0x1
+#define BIT_CTRL_ADC_FIFO_RD_REQ_ST(x)        	(((x) & BIT_MASK_ADC_FIFO_RD_REQ_ST) << BIT_SHIFT_ADC_FIFO_RD_REQ_ST)
+
+#define BIT_ADC_FIFO_FULL_ST                  	BIT(4)
+#define BIT_SHIFT_ADC_FIFO_FULL_ST            	4
+#define BIT_MASK_ADC_FIFO_FULL_ST             	0x1
+#define BIT_CTRL_ADC_FIFO_FULL_ST(x)          	(((x) & BIT_MASK_ADC_FIFO_FULL_ST) << BIT_SHIFT_ADC_FIFO_FULL_ST)
+
+#define BIT_ADC_COMP_3_ST                     	BIT(3)
+#define BIT_SHIFT_ADC_COMP_3_ST               	3
+#define BIT_MASK_ADC_COMP_3_ST                	0x1
+#define BIT_CTRL_ADC_COMP_3_ST(x)             	(((x) & BIT_MASK_ADC_COMP_3_ST) << BIT_SHIFT_ADC_COMP_3_ST)
+
+#define BIT_ADC_COMP_2_ST                     	BIT(2)
+#define BIT_SHIFT_ADC_COMP_2_ST               	2
+#define BIT_MASK_ADC_COMP_2_ST                	0x1
+#define BIT_CTRL_ADC_COMP_2_ST(x)             	(((x) & BIT_MASK_ADC_COMP_2_ST) << BIT_SHIFT_ADC_COMP_2_ST)
+
+#define BIT_ADC_COMP_1_ST                     	BIT(1)
+#define BIT_SHIFT_ADC_COMP_1_ST               	1
+#define BIT_MASK_ADC_COMP_1_ST                	0x1
+#define BIT_CTRL_ADC_COMP_1_ST(x)             	(((x) & BIT_MASK_ADC_COMP_1_ST) << BIT_SHIFT_ADC_COMP_1_ST)
+
+#define BIT_ADC_COMP_0_ST                     	BIT(0)
+#define BIT_SHIFT_ADC_COMP_0_ST               	0
+#define BIT_MASK_ADC_COMP_0_ST                	0x1
+#define BIT_CTRL_ADC_COMP_0_ST(x)             	(((x) & BIT_MASK_ADC_COMP_0_ST) << BIT_SHIFT_ADC_COMP_0_ST)
+
+
+//2 REG_ADC_COMP_VALUE_L
+
+#define BIT_SHIFT_ADC_COMP_TH_1 16
+#define BIT_MASK_ADC_COMP_TH_1 0xffff
+#define BIT_ADC_COMP_TH_1(x)                  	(((x) & BIT_MASK_ADC_COMP_TH_1) << BIT_SHIFT_ADC_COMP_TH_1)
+#define BIT_CTRL_ADC_COMP_TH_1(x)             	(((x) & BIT_MASK_ADC_COMP_TH_1) << BIT_SHIFT_ADC_COMP_TH_1)
+#define BIT_GET_ADC_COMP_TH_1(x)              	(((x) >> BIT_SHIFT_ADC_COMP_TH_1) & BIT_MASK_ADC_COMP_TH_1)
+
+
+#define BIT_SHIFT_ADC_COMP_TH_0 0
+#define BIT_MASK_ADC_COMP_TH_0 0xffff
+#define BIT_ADC_COMP_TH_0(x)                  	(((x) & BIT_MASK_ADC_COMP_TH_0) << BIT_SHIFT_ADC_COMP_TH_0)
+#define BIT_CTRL_ADC_COMP_TH_0(x)             	(((x) & BIT_MASK_ADC_COMP_TH_0) << BIT_SHIFT_ADC_COMP_TH_0)
+#define BIT_GET_ADC_COMP_TH_0(x)              	(((x) >> BIT_SHIFT_ADC_COMP_TH_0) & BIT_MASK_ADC_COMP_TH_0)
+
+
+//2 REG_ADC_COMP_VALUE_H
+
+#define BIT_SHIFT_ADC_COMP_TH_3 16
+#define BIT_MASK_ADC_COMP_TH_3 0xffff
+#define BIT_ADC_COMP_TH_3(x)                  	(((x) & BIT_MASK_ADC_COMP_TH_3) << BIT_SHIFT_ADC_COMP_TH_3)
+#define BIT_CTRL_ADC_COMP_TH_3(x)             	(((x) & BIT_MASK_ADC_COMP_TH_3) << BIT_SHIFT_ADC_COMP_TH_3)
+#define BIT_GET_ADC_COMP_TH_3(x)              	(((x) >> BIT_SHIFT_ADC_COMP_TH_3) & BIT_MASK_ADC_COMP_TH_3)
+
+
+#define BIT_SHIFT_ADC_COMP_TH_2 0
+#define BIT_MASK_ADC_COMP_TH_2 0xffff
+#define BIT_ADC_COMP_TH_2(x)                  	(((x) & BIT_MASK_ADC_COMP_TH_2) << BIT_SHIFT_ADC_COMP_TH_2)
+#define BIT_CTRL_ADC_COMP_TH_2(x)             	(((x) & BIT_MASK_ADC_COMP_TH_2) << BIT_SHIFT_ADC_COMP_TH_2)
+#define BIT_GET_ADC_COMP_TH_2(x)              	(((x) >> BIT_SHIFT_ADC_COMP_TH_2) & BIT_MASK_ADC_COMP_TH_2)
+
+
+//2 REG_ADC_COMP_SET
+
+#define BIT_SHIFT_ADC_GREATER_THAN 0
+#define BIT_MASK_ADC_GREATER_THAN 0xf
+#define BIT_ADC_GREATER_THAN(x)               	(((x) & BIT_MASK_ADC_GREATER_THAN) << BIT_SHIFT_ADC_GREATER_THAN)
+#define BIT_CTRL_ADC_GREATER_THAN(x)          	(((x) & BIT_MASK_ADC_GREATER_THAN) << BIT_SHIFT_ADC_GREATER_THAN)
+#define BIT_GET_ADC_GREATER_THAN(x)           	(((x) >> BIT_SHIFT_ADC_GREATER_THAN) & BIT_MASK_ADC_GREATER_THAN)
+
+
+//2 REG_ADC_POWER
+
+#define BIT_SHIFT_ADC_PWR_CUT_CNTR 16
+#define BIT_MASK_ADC_PWR_CUT_CNTR 0xff
+#define BIT_ADC_PWR_CUT_CNTR(x)               	(((x) & BIT_MASK_ADC_PWR_CUT_CNTR) << BIT_SHIFT_ADC_PWR_CUT_CNTR)
+#define BIT_CTRL_ADC_PWR_CUT_CNTR(x)          	(((x) & BIT_MASK_ADC_PWR_CUT_CNTR) << BIT_SHIFT_ADC_PWR_CUT_CNTR)
+#define BIT_GET_ADC_PWR_CUT_CNTR(x)           	(((x) >> BIT_SHIFT_ADC_PWR_CUT_CNTR) & BIT_MASK_ADC_PWR_CUT_CNTR)
+
+#define BIT_ADC_FIFO_ON_ST                    	BIT(11)
+#define BIT_SHIFT_ADC_FIFO_ON_ST              	11
+#define BIT_MASK_ADC_FIFO_ON_ST               	0x1
+#define BIT_CTRL_ADC_FIFO_ON_ST(x)            	(((x) & BIT_MASK_ADC_FIFO_ON_ST) << BIT_SHIFT_ADC_FIFO_ON_ST)
+
+#define BIT_ADC_ISO_ON_ST                     	BIT(10)
+#define BIT_SHIFT_ADC_ISO_ON_ST               	10
+#define BIT_MASK_ADC_ISO_ON_ST                	0x1
+#define BIT_CTRL_ADC_ISO_ON_ST(x)             	(((x) & BIT_MASK_ADC_ISO_ON_ST) << BIT_SHIFT_ADC_ISO_ON_ST)
+
+#define BIT_ADC_PWR33_ON_ST                   	BIT(9)
+#define BIT_SHIFT_ADC_PWR33_ON_ST             	9
+#define BIT_MASK_ADC_PWR33_ON_ST              	0x1
+#define BIT_CTRL_ADC_PWR33_ON_ST(x)           	(((x) & BIT_MASK_ADC_PWR33_ON_ST) << BIT_SHIFT_ADC_PWR33_ON_ST)
+
+#define BIT_ADC_PWR12_ON_ST                   	BIT(8)
+#define BIT_SHIFT_ADC_PWR12_ON_ST             	8
+#define BIT_MASK_ADC_PWR12_ON_ST              	0x1
+#define BIT_CTRL_ADC_PWR12_ON_ST(x)           	(((x) & BIT_MASK_ADC_PWR12_ON_ST) << BIT_SHIFT_ADC_PWR12_ON_ST)
+
+#define BIT_ADC_ISO_MANUAL                    	BIT(3)
+#define BIT_SHIFT_ADC_ISO_MANUAL              	3
+#define BIT_MASK_ADC_ISO_MANUAL               	0x1
+#define BIT_CTRL_ADC_ISO_MANUAL(x)            	(((x) & BIT_MASK_ADC_ISO_MANUAL) << BIT_SHIFT_ADC_ISO_MANUAL)
+
+#define BIT_ADC_PWR33_MANUAL                  	BIT(2)
+#define BIT_SHIFT_ADC_PWR33_MANUAL            	2
+#define BIT_MASK_ADC_PWR33_MANUAL             	0x1
+#define BIT_CTRL_ADC_PWR33_MANUAL(x)          	(((x) & BIT_MASK_ADC_PWR33_MANUAL) << BIT_SHIFT_ADC_PWR33_MANUAL)
+
+#define BIT_ADC_PWR12_MANUAL                  	BIT(1)
+#define BIT_SHIFT_ADC_PWR12_MANUAL            	1
+#define BIT_MASK_ADC_PWR12_MANUAL             	0x1
+#define BIT_CTRL_ADC_PWR12_MANUAL(x)          	(((x) & BIT_MASK_ADC_PWR12_MANUAL) << BIT_SHIFT_ADC_PWR12_MANUAL)
+
+#define BIT_ADC_PWR_AUTO                      	BIT(0)
+#define BIT_SHIFT_ADC_PWR_AUTO                	0
+#define BIT_MASK_ADC_PWR_AUTO                 	0x1
+#define BIT_CTRL_ADC_PWR_AUTO(x)              	(((x) & BIT_MASK_ADC_PWR_AUTO) << BIT_SHIFT_ADC_PWR_AUTO)
+
+
+//2 REG_ADC_ANAPAR_AD0
+
+#define BIT_SHIFT_ADC_ANAPAR_AD0 2
+#define BIT_MASK_ADC_ANAPAR_AD0 0x3fffffff
+#define BIT_ADC_ANAPAR_AD0(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD0) << BIT_SHIFT_ADC_ANAPAR_AD0)
+#define BIT_CTRL_ADC_ANAPAR_AD0(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD0) << BIT_SHIFT_ADC_ANAPAR_AD0)
+#define BIT_GET_ADC_ANAPAR_AD0(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD0) & BIT_MASK_ADC_ANAPAR_AD0)
+
+#define BIT_ADC_AUDIO_EN                      	BIT(1)
+#define BIT_SHIFT_ADC_AUDIO_EN                	1
+#define BIT_MASK_ADC_AUDIO_EN                 	0x1
+#define BIT_CTRL_ADC_AUDIO_EN(x)              	(((x) & BIT_MASK_ADC_AUDIO_EN) << BIT_SHIFT_ADC_AUDIO_EN)
+
+#define BIT_ADC_EN_MANUAL                     	BIT(0)
+#define BIT_SHIFT_ADC_EN_MANUAL               	0
+#define BIT_MASK_ADC_EN_MANUAL                	0x1
+#define BIT_CTRL_ADC_EN_MANUAL(x)             	(((x) & BIT_MASK_ADC_EN_MANUAL) << BIT_SHIFT_ADC_EN_MANUAL)
+
+
+//2 REG_ADC_ANAPAR_AD1
+
+#define BIT_SHIFT_ADC_ANAPAR_AD1 0
+#define BIT_MASK_ADC_ANAPAR_AD1 0xffffffffL
+#define BIT_ADC_ANAPAR_AD1(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD1) << BIT_SHIFT_ADC_ANAPAR_AD1)
+#define BIT_CTRL_ADC_ANAPAR_AD1(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD1) << BIT_SHIFT_ADC_ANAPAR_AD1)
+#define BIT_GET_ADC_ANAPAR_AD1(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD1) & BIT_MASK_ADC_ANAPAR_AD1)
+
+
+//2 REG_ADC_ANAPAR_AD2
+
+#define BIT_SHIFT_ADC_ANAPAR_AD2 0
+#define BIT_MASK_ADC_ANAPAR_AD2 0xffffffffL
+#define BIT_ADC_ANAPAR_AD2(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD2) << BIT_SHIFT_ADC_ANAPAR_AD2)
+#define BIT_CTRL_ADC_ANAPAR_AD2(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD2) << BIT_SHIFT_ADC_ANAPAR_AD2)
+#define BIT_GET_ADC_ANAPAR_AD2(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD2) & BIT_MASK_ADC_ANAPAR_AD2)
+
+
+//2 REG_ADC_ANAPAR_AD3
+
+#define BIT_SHIFT_ADC_ANAPAR_AD3 0
+#define BIT_MASK_ADC_ANAPAR_AD3 0xffffffffL
+#define BIT_ADC_ANAPAR_AD3(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD3) << BIT_SHIFT_ADC_ANAPAR_AD3)
+#define BIT_CTRL_ADC_ANAPAR_AD3(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD3) << BIT_SHIFT_ADC_ANAPAR_AD3)
+#define BIT_GET_ADC_ANAPAR_AD3(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD3) & BIT_MASK_ADC_ANAPAR_AD3)
+
+
+//2 REG_ADC_ANAPAR_AD4
+
+#define BIT_SHIFT_ADC_ANAPAR_AD4 0
+#define BIT_MASK_ADC_ANAPAR_AD4 0xffffffffL
+#define BIT_ADC_ANAPAR_AD4(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD4) << BIT_SHIFT_ADC_ANAPAR_AD4)
+#define BIT_CTRL_ADC_ANAPAR_AD4(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD4) << BIT_SHIFT_ADC_ANAPAR_AD4)
+#define BIT_GET_ADC_ANAPAR_AD4(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD4) & BIT_MASK_ADC_ANAPAR_AD4)
+
+
+//2 REG_ADC_ANAPAR_AD5
+
+#define BIT_SHIFT_ADC_ANAPAR_AD5 0
+#define BIT_MASK_ADC_ANAPAR_AD5 0xffffffffL
+#define BIT_ADC_ANAPAR_AD5(x)                 	(((x) & BIT_MASK_ADC_ANAPAR_AD5) << BIT_SHIFT_ADC_ANAPAR_AD5)
+#define BIT_CTRL_ADC_ANAPAR_AD5(x)            	(((x) & BIT_MASK_ADC_ANAPAR_AD5) << BIT_SHIFT_ADC_ANAPAR_AD5)
+#define BIT_GET_ADC_ANAPAR_AD5(x)             	(((x) >> BIT_SHIFT_ADC_ANAPAR_AD5) & BIT_MASK_ADC_ANAPAR_AD5)
+
+
+//2 REG_ADC_CALI_DATA
+
+#define BIT_SHIFT_ADC_CALI_DATA_6 16
+#define BIT_MASK_ADC_CALI_DATA_6 0xffff
+#define BIT_ADC_CALI_DATA_6(x)                	(((x) & BIT_MASK_ADC_CALI_DATA_6) << BIT_SHIFT_ADC_CALI_DATA_6)
+#define BIT_CTRL_ADC_CALI_DATA_6(x)           	(((x) & BIT_MASK_ADC_CALI_DATA_6) << BIT_SHIFT_ADC_CALI_DATA_6)
+#define BIT_GET_ADC_CALI_DATA_6(x)            	(((x) >> BIT_SHIFT_ADC_CALI_DATA_6) & BIT_MASK_ADC_CALI_DATA_6)
+
+
+#define BIT_SHIFT_ADC_CALI_DATA_0 0
+#define BIT_MASK_ADC_CALI_DATA_0 0xffff
+#define BIT_ADC_CALI_DATA_0(x)                	(((x) & BIT_MASK_ADC_CALI_DATA_0) << BIT_SHIFT_ADC_CALI_DATA_0)
+#define BIT_CTRL_ADC_CALI_DATA_0(x)           	(((x) & BIT_MASK_ADC_CALI_DATA_0) << BIT_SHIFT_ADC_CALI_DATA_0)
+#define BIT_GET_ADC_CALI_DATA_0(x)            	(((x) >> BIT_SHIFT_ADC_CALI_DATA_0) & BIT_MASK_ADC_CALI_DATA_0)
+
+//================ Register Reg Field  =========================
+#define REG_ADC_FIFO_READ 0x0000
+#define REG_ADC_CONTROL 0x0004
+#define REG_ADC_INTR_EN 0x0008
+#define REG_ADC_INTR_STS 0x000C
+#define REG_ADC_COMP_VALUE_L 0x0010
+#define REG_ADC_COMP_VALUE_H 0x0014
+#define REG_ADC_COMP_SET 0x0018
+#define REG_ADC_POWER 0x001C
+#define REG_ADC_ANAPAR_AD0 0x0020
+#define REG_ADC_ANAPAR_AD1 0x0024
+#define REG_ADC_ANAPAR_AD2 0x0028
+#define REG_ADC_ANAPAR_AD3 0x002C
+#define REG_ADC_ANAPAR_AD4 0x0030
+#define REG_ADC_ANAPAR_AD5 0x0034
+#define REG_ADC_CALI_DATA 0x0038
+
+//================ ADC HAL related enumeration ==================
+
+//================ ADC Function Prototypes  =====================
+#define HAL_ADC_WRITE32(addr, value)    HAL_WRITE32(ADC_REG_BASE,addr,value)
+#define HAL_ADC_READ32(addr)            HAL_READ32(ADC_REG_BASE,addr)
+
+RTK_STATUS HalADCInit8195a(IN VOID *Data);
+RTK_STATUS HalADCDeInit8195a(IN VOID *Data);
+RTK_STATUS HalADCEnableRtl8195a(IN VOID *Data);
+RTK_STATUS HalADCIntrCtrl8195a(IN VOID *Data);
+u32 HalADCReceiveRtl8195a(IN VOID *Data);
+u32 HalADCReadRegRtl8195a(IN VOID *Data,IN  u8 I2CReg);
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_dac.h

@@ -0,0 +1,294 @@
+#ifndef _RTL8195A_DAC_H_
+#define _RTL8195A_DAC_H_
+
+//================ Register Bit Field ==========================
+//2 REG_DAC0_FIFO_WR
+
+#define BIT_SHIFT_DAC0_FIFO_WO 0
+#define BIT_MASK_DAC0_FIFO_WO 0xffffffffL
+#define BIT_DAC0_FIFO_WO(x)                   	(((x) & BIT_MASK_DAC0_FIFO_WO) << BIT_SHIFT_DAC0_FIFO_WO)
+#define BIT_CTRL_DAC0_FIFO_WO(x)              	(((x) & BIT_MASK_DAC0_FIFO_WO) << BIT_SHIFT_DAC0_FIFO_WO)
+#define BIT_GET_DAC0_FIFO_WO(x)               	(((x) >> BIT_SHIFT_DAC0_FIFO_WO) & BIT_MASK_DAC0_FIFO_WO)
+
+
+//2 REG_DAC_CTRL
+
+#define BIT_SHIFT_DAC_DELTA_SIGMA 25
+#define BIT_MASK_DAC_DELTA_SIGMA 0x7
+#define BIT_DAC_DELTA_SIGMA(x)                	(((x) & BIT_MASK_DAC_DELTA_SIGMA) << BIT_SHIFT_DAC_DELTA_SIGMA)
+#define BIT_CTRL_DAC_DELTA_SIGMA(x)           	(((x) & BIT_MASK_DAC_DELTA_SIGMA) << BIT_SHIFT_DAC_DELTA_SIGMA)
+#define BIT_GET_DAC_DELTA_SIGMA(x)            	(((x) >> BIT_SHIFT_DAC_DELTA_SIGMA) & BIT_MASK_DAC_DELTA_SIGMA)
+
+#define BIT_DAC_BYPASS_DSC                    	BIT(24)
+#define BIT_SHIFT_DAC_BYPASS_DSC              	24
+#define BIT_MASK_DAC_BYPASS_DSC               	0x1
+#define BIT_CTRL_DAC_BYPASS_DSC(x)            	(((x) & BIT_MASK_DAC_BYPASS_DSC) << BIT_SHIFT_DAC_BYPASS_DSC)
+
+
+#define BIT_SHIFT_DAC_DSC_DBG_SEL 19
+#define BIT_MASK_DAC_DSC_DBG_SEL 0x3
+#define BIT_DAC_DSC_DBG_SEL(x)                	(((x) & BIT_MASK_DAC_DSC_DBG_SEL) << BIT_SHIFT_DAC_DSC_DBG_SEL)
+#define BIT_CTRL_DAC_DSC_DBG_SEL(x)           	(((x) & BIT_MASK_DAC_DSC_DBG_SEL) << BIT_SHIFT_DAC_DSC_DBG_SEL)
+#define BIT_GET_DAC_DSC_DBG_SEL(x)            	(((x) >> BIT_SHIFT_DAC_DSC_DBG_SEL) & BIT_MASK_DAC_DSC_DBG_SEL)
+
+
+#define BIT_SHIFT_DAC_DBG_SEL 16
+#define BIT_MASK_DAC_DBG_SEL 0x7
+#define BIT_DAC_DBG_SEL(x)                    	(((x) & BIT_MASK_DAC_DBG_SEL) << BIT_SHIFT_DAC_DBG_SEL)
+#define BIT_CTRL_DAC_DBG_SEL(x)               	(((x) & BIT_MASK_DAC_DBG_SEL) << BIT_SHIFT_DAC_DBG_SEL)
+#define BIT_GET_DAC_DBG_SEL(x)                	(((x) >> BIT_SHIFT_DAC_DBG_SEL) & BIT_MASK_DAC_DBG_SEL)
+
+
+#define BIT_SHIFT_DAC_BURST_SIZE 8
+#define BIT_MASK_DAC_BURST_SIZE 0xf
+#define BIT_DAC_BURST_SIZE(x)                 	(((x) & BIT_MASK_DAC_BURST_SIZE) << BIT_SHIFT_DAC_BURST_SIZE)
+#define BIT_CTRL_DAC_BURST_SIZE(x)            	(((x) & BIT_MASK_DAC_BURST_SIZE) << BIT_SHIFT_DAC_BURST_SIZE)
+#define BIT_GET_DAC_BURST_SIZE(x)             	(((x) >> BIT_SHIFT_DAC_BURST_SIZE) & BIT_MASK_DAC_BURST_SIZE)
+
+#define BIT_DAC_FILTER_SETTLE                 	BIT(4)
+#define BIT_SHIFT_DAC_FILTER_SETTLE           	4
+#define BIT_MASK_DAC_FILTER_SETTLE            	0x1
+#define BIT_CTRL_DAC_FILTER_SETTLE(x)         	(((x) & BIT_MASK_DAC_FILTER_SETTLE) << BIT_SHIFT_DAC_FILTER_SETTLE)
+
+#define BIT_DAC_OV_OPTION                     	BIT(3)
+#define BIT_SHIFT_DAC_OV_OPTION               	3
+#define BIT_MASK_DAC_OV_OPTION                	0x1
+#define BIT_CTRL_DAC_OV_OPTION(x)             	(((x) & BIT_MASK_DAC_OV_OPTION) << BIT_SHIFT_DAC_OV_OPTION)
+
+#define BIT_DAC_ENDIAN                        	BIT(2)
+#define BIT_SHIFT_DAC_ENDIAN                  	2
+#define BIT_MASK_DAC_ENDIAN                   	0x1
+#define BIT_CTRL_DAC_ENDIAN(x)                	(((x) & BIT_MASK_DAC_ENDIAN) << BIT_SHIFT_DAC_ENDIAN)
+
+#define BIT_DAC_SPEED                         	BIT(1)
+#define BIT_SHIFT_DAC_SPEED                   	1
+#define BIT_MASK_DAC_SPEED                    	0x1
+#define BIT_CTRL_DAC_SPEED(x)                 	(((x) & BIT_MASK_DAC_SPEED) << BIT_SHIFT_DAC_SPEED)
+
+#define BIT_DAC_FIFO_EN                       	BIT(0)
+#define BIT_SHIFT_DAC_FIFO_EN                 	0
+#define BIT_MASK_DAC_FIFO_EN                  	0x1
+#define BIT_CTRL_DAC_FIFO_EN(x)               	(((x) & BIT_MASK_DAC_FIFO_EN) << BIT_SHIFT_DAC_FIFO_EN)
+
+
+//2 REG_DAC_INTR_CTRL
+#define BIT_DAC_DSC_OVERFLOW1_EN              	BIT(6)
+#define BIT_SHIFT_DAC_DSC_OVERFLOW1_EN        	6
+#define BIT_MASK_DAC_DSC_OVERFLOW1_EN         	0x1
+#define BIT_CTRL_DAC_DSC_OVERFLOW1_EN(x)      	(((x) & BIT_MASK_DAC_DSC_OVERFLOW1_EN) << BIT_SHIFT_DAC_DSC_OVERFLOW1_EN)
+
+#define BIT_DAC_DSC_OVERFLOW0_EN              	BIT(5)
+#define BIT_SHIFT_DAC_DSC_OVERFLOW0_EN        	5
+#define BIT_MASK_DAC_DSC_OVERFLOW0_EN         	0x1
+#define BIT_CTRL_DAC_DSC_OVERFLOW0_EN(x)      	(((x) & BIT_MASK_DAC_DSC_OVERFLOW0_EN) << BIT_SHIFT_DAC_DSC_OVERFLOW0_EN)
+
+#define BIT_DAC__WRITE_ERROR_EN               	BIT(4)
+#define BIT_SHIFT_DAC__WRITE_ERROR_EN         	4
+#define BIT_MASK_DAC__WRITE_ERROR_EN          	0x1
+#define BIT_CTRL_DAC__WRITE_ERROR_EN(x)       	(((x) & BIT_MASK_DAC__WRITE_ERROR_EN) << BIT_SHIFT_DAC__WRITE_ERROR_EN)
+
+#define BIT_DAC_FIFO_STOP_EN                  	BIT(3)
+#define BIT_SHIFT_DAC_FIFO_STOP_EN            	3
+#define BIT_MASK_DAC_FIFO_STOP_EN             	0x1
+#define BIT_CTRL_DAC_FIFO_STOP_EN(x)          	(((x) & BIT_MASK_DAC_FIFO_STOP_EN) << BIT_SHIFT_DAC_FIFO_STOP_EN)
+
+#define BIT_DAC_FIFO_OVERFLOW_EN              	BIT(2)
+#define BIT_SHIFT_DAC_FIFO_OVERFLOW_EN        	2
+#define BIT_MASK_DAC_FIFO_OVERFLOW_EN         	0x1
+#define BIT_CTRL_DAC_FIFO_OVERFLOW_EN(x)      	(((x) & BIT_MASK_DAC_FIFO_OVERFLOW_EN) << BIT_SHIFT_DAC_FIFO_OVERFLOW_EN)
+
+#define BIT_DAC_FIFO_WR_REQ_EN                	BIT(1)
+#define BIT_SHIFT_DAC_FIFO_WR_REQ_EN          	1
+#define BIT_MASK_DAC_FIFO_WR_REQ_EN           	0x1
+#define BIT_CTRL_DAC_FIFO_WR_REQ_EN(x)        	(((x) & BIT_MASK_DAC_FIFO_WR_REQ_EN) << BIT_SHIFT_DAC_FIFO_WR_REQ_EN)
+
+#define BIT_DAC_FIFO_FULL_EN                  	BIT(0)
+#define BIT_SHIFT_DAC_FIFO_FULL_EN            	0
+#define BIT_MASK_DAC_FIFO_FULL_EN             	0x1
+#define BIT_CTRL_DAC_FIFO_FULL_EN(x)          	(((x) & BIT_MASK_DAC_FIFO_FULL_EN) << BIT_SHIFT_DAC_FIFO_FULL_EN)
+
+
+//2 REG_DAC_INTR_STS
+#define BIT_DAC_DSC_OVERFLOW1_ST              	BIT(6)
+#define BIT_SHIFT_DAC_DSC_OVERFLOW1_ST        	6
+#define BIT_MASK_DAC_DSC_OVERFLOW1_ST         	0x1
+#define BIT_CTRL_DAC_DSC_OVERFLOW1_ST(x)      	(((x) & BIT_MASK_DAC_DSC_OVERFLOW1_ST) << BIT_SHIFT_DAC_DSC_OVERFLOW1_ST)
+
+#define BIT_DAC_DSC_OVERFLOW0_ST              	BIT(5)
+#define BIT_SHIFT_DAC_DSC_OVERFLOW0_ST        	5
+#define BIT_MASK_DAC_DSC_OVERFLOW0_ST         	0x1
+#define BIT_CTRL_DAC_DSC_OVERFLOW0_ST(x)      	(((x) & BIT_MASK_DAC_DSC_OVERFLOW0_ST) << BIT_SHIFT_DAC_DSC_OVERFLOW0_ST)
+
+#define BIT_DAC__WRITE_ERROR_ST               	BIT(4)
+#define BIT_SHIFT_DAC__WRITE_ERROR_ST         	4
+#define BIT_MASK_DAC__WRITE_ERROR_ST          	0x1
+#define BIT_CTRL_DAC__WRITE_ERROR_ST(x)       	(((x) & BIT_MASK_DAC__WRITE_ERROR_ST) << BIT_SHIFT_DAC__WRITE_ERROR_ST)
+
+#define BIT_DAC_FIFO_STOP_ST                  	BIT(3)
+#define BIT_SHIFT_DAC_FIFO_STOP_ST            	3
+#define BIT_MASK_DAC_FIFO_STOP_ST             	0x1
+#define BIT_CTRL_DAC_FIFO_STOP_ST(x)          	(((x) & BIT_MASK_DAC_FIFO_STOP_ST) << BIT_SHIFT_DAC_FIFO_STOP_ST)
+
+#define BIT_DAC_FIFO_OVERFLOW_ST              	BIT(2)
+#define BIT_SHIFT_DAC_FIFO_OVERFLOW_ST        	2
+#define BIT_MASK_DAC_FIFO_OVERFLOW_ST         	0x1
+#define BIT_CTRL_DAC_FIFO_OVERFLOW_ST(x)      	(((x) & BIT_MASK_DAC_FIFO_OVERFLOW_ST) << BIT_SHIFT_DAC_FIFO_OVERFLOW_ST)
+
+#define BIT_DAC_FIFO_WR_REQ_ST                	BIT(1)
+#define BIT_SHIFT_DAC_FIFO_WR_REQ_ST          	1
+#define BIT_MASK_DAC_FIFO_WR_REQ_ST           	0x1
+#define BIT_CTRL_DAC_FIFO_WR_REQ_ST(x)        	(((x) & BIT_MASK_DAC_FIFO_WR_REQ_ST) << BIT_SHIFT_DAC_FIFO_WR_REQ_ST)
+
+#define BIT_DAC_FIFO_FULL_ST                  	BIT(0)
+#define BIT_SHIFT_DAC_FIFO_FULL_ST            	0
+#define BIT_MASK_DAC_FIFO_FULL_ST             	0x1
+#define BIT_CTRL_DAC_FIFO_FULL_ST(x)          	(((x) & BIT_MASK_DAC_FIFO_FULL_ST) << BIT_SHIFT_DAC_FIFO_FULL_ST)
+
+
+//2 REG_DAC_PWR_CTRL
+
+#define BIT_SHIFT_DAC_PWR_CUT_CNTR 16
+#define BIT_MASK_DAC_PWR_CUT_CNTR 0xff
+#define BIT_DAC_PWR_CUT_CNTR(x)               	(((x) & BIT_MASK_DAC_PWR_CUT_CNTR) << BIT_SHIFT_DAC_PWR_CUT_CNTR)
+#define BIT_CTRL_DAC_PWR_CUT_CNTR(x)          	(((x) & BIT_MASK_DAC_PWR_CUT_CNTR) << BIT_SHIFT_DAC_PWR_CUT_CNTR)
+#define BIT_GET_DAC_PWR_CUT_CNTR(x)           	(((x) >> BIT_SHIFT_DAC_PWR_CUT_CNTR) & BIT_MASK_DAC_PWR_CUT_CNTR)
+
+#define BIT_ST_DAC_FIFO_ON                    	BIT(11)
+#define BIT_SHIFT_ST_DAC_FIFO_ON              	11
+#define BIT_MASK_ST_DAC_FIFO_ON               	0x1
+#define BIT_CTRL_ST_DAC_FIFO_ON(x)            	(((x) & BIT_MASK_ST_DAC_FIFO_ON) << BIT_SHIFT_ST_DAC_FIFO_ON)
+
+#define BIT_ST_DAC_ISO_ON                     	BIT(10)
+#define BIT_SHIFT_ST_DAC_ISO_ON               	10
+#define BIT_MASK_ST_DAC_ISO_ON                	0x1
+#define BIT_CTRL_ST_DAC_ISO_ON(x)             	(((x) & BIT_MASK_ST_DAC_ISO_ON) << BIT_SHIFT_ST_DAC_ISO_ON)
+
+#define BIT_ST_DAC_PWR33_ON                   	BIT(9)
+#define BIT_SHIFT_ST_DAC_PWR33_ON             	9
+#define BIT_MASK_ST_DAC_PWR33_ON              	0x1
+#define BIT_CTRL_ST_DAC_PWR33_ON(x)           	(((x) & BIT_MASK_ST_DAC_PWR33_ON) << BIT_SHIFT_ST_DAC_PWR33_ON)
+
+#define BIT_ST_DAC_PWR12_ON                   	BIT(8)
+#define BIT_SHIFT_ST_DAC_PWR12_ON             	8
+#define BIT_MASK_ST_DAC_PWR12_ON              	0x1
+#define BIT_CTRL_ST_DAC_PWR12_ON(x)           	(((x) & BIT_MASK_ST_DAC_PWR12_ON) << BIT_SHIFT_ST_DAC_PWR12_ON)
+
+#define BIT_DAC_ISO_MANU                      	BIT(3)
+#define BIT_SHIFT_DAC_ISO_MANU                	3
+#define BIT_MASK_DAC_ISO_MANU                 	0x1
+#define BIT_CTRL_DAC_ISO_MANU(x)              	(((x) & BIT_MASK_DAC_ISO_MANU) << BIT_SHIFT_DAC_ISO_MANU)
+
+#define BIT_DAC_PWR33_MANU                    	BIT(2)
+#define BIT_SHIFT_DAC_PWR33_MANU              	2
+#define BIT_MASK_DAC_PWR33_MANU               	0x1
+#define BIT_CTRL_DAC_PWR33_MANU(x)            	(((x) & BIT_MASK_DAC_PWR33_MANU) << BIT_SHIFT_DAC_PWR33_MANU)
+
+#define BIT_DAC_PWR12_MANU                    	BIT(1)
+#define BIT_SHIFT_DAC_PWR12_MANU              	1
+#define BIT_MASK_DAC_PWR12_MANU               	0x1
+#define BIT_CTRL_DAC_PWR12_MANU(x)            	(((x) & BIT_MASK_DAC_PWR12_MANU) << BIT_SHIFT_DAC_PWR12_MANU)
+
+#define BIT_DAC_PWR_AUTO                      	BIT(0)
+#define BIT_SHIFT_DAC_PWR_AUTO                	0
+#define BIT_MASK_DAC_PWR_AUTO                 	0x1
+#define BIT_CTRL_DAC_PWR_AUTO(x)              	(((x) & BIT_MASK_DAC_PWR_AUTO) << BIT_SHIFT_DAC_PWR_AUTO)
+
+
+//2 REG_DAC_ANAPAR_DA0
+
+#define BIT_SHIFT_PWR_ALL_CNTR 12
+#define BIT_MASK_PWR_ALL_CNTR 0xfffff
+#define BIT_PWR_ALL_CNTR(x)                   	(((x) & BIT_MASK_PWR_ALL_CNTR) << BIT_SHIFT_PWR_ALL_CNTR)
+#define BIT_CTRL_PWR_ALL_CNTR(x)              	(((x) & BIT_MASK_PWR_ALL_CNTR) << BIT_SHIFT_PWR_ALL_CNTR)
+#define BIT_GET_PWR_ALL_CNTR(x)               	(((x) >> BIT_SHIFT_PWR_ALL_CNTR) & BIT_MASK_PWR_ALL_CNTR)
+
+
+#define BIT_SHIFT_PWR_FUP_CNTR 0
+#define BIT_MASK_PWR_FUP_CNTR 0xfff
+#define BIT_PWR_FUP_CNTR(x)                   	(((x) & BIT_MASK_PWR_FUP_CNTR) << BIT_SHIFT_PWR_FUP_CNTR)
+#define BIT_CTRL_PWR_FUP_CNTR(x)              	(((x) & BIT_MASK_PWR_FUP_CNTR) << BIT_SHIFT_PWR_FUP_CNTR)
+#define BIT_GET_PWR_FUP_CNTR(x)               	(((x) >> BIT_SHIFT_PWR_FUP_CNTR) & BIT_MASK_PWR_FUP_CNTR)
+
+
+//2 REG_DAC_ANAPAR_DA1
+#define BIT_FUP_EN                            	BIT(31)
+#define BIT_SHIFT_FUP_EN                      	31
+#define BIT_MASK_FUP_EN                       	0x1
+#define BIT_CTRL_FUP_EN(x)                    	(((x) & BIT_MASK_FUP_EN) << BIT_SHIFT_FUP_EN)
+
+
+#define BIT_SHIFT_ANAPAR_DA 8
+#define BIT_MASK_ANAPAR_DA 0x7fffff
+#define BIT_ANAPAR_DA(x)                      	(((x) & BIT_MASK_ANAPAR_DA) << BIT_SHIFT_ANAPAR_DA)
+#define BIT_CTRL_ANAPAR_DA(x)                 	(((x) & BIT_MASK_ANAPAR_DA) << BIT_SHIFT_ANAPAR_DA)
+#define BIT_GET_ANAPAR_DA(x)                  	(((x) >> BIT_SHIFT_ANAPAR_DA) & BIT_MASK_ANAPAR_DA)
+
+#define BIT_D_POW_DACVREF                     	BIT(7)
+#define BIT_SHIFT_D_POW_DACVREF               	7
+#define BIT_MASK_D_POW_DACVREF                	0x1
+#define BIT_CTRL_D_POW_DACVREF(x)             	(((x) & BIT_MASK_D_POW_DACVREF) << BIT_SHIFT_D_POW_DACVREF)
+
+#define BIT_D_POW_VREF2                       	BIT(6)
+#define BIT_SHIFT_D_POW_VREF2                 	6
+#define BIT_MASK_D_POW_VREF2                  	0x1
+#define BIT_CTRL_D_POW_VREF2(x)               	(((x) & BIT_MASK_D_POW_VREF2) << BIT_SHIFT_D_POW_VREF2)
+
+#define BIT_D_POW_MBIAS                       	BIT(5)
+#define BIT_SHIFT_D_POW_MBIAS                 	5
+#define BIT_MASK_D_POW_MBIAS                  	0x1
+#define BIT_CTRL_D_POW_MBIAS(x)               	(((x) & BIT_MASK_D_POW_MBIAS) << BIT_SHIFT_D_POW_MBIAS)
+
+#define BIT_D_POW_DIV4                        	BIT(4)
+#define BIT_SHIFT_D_POW_DIV4                  	4
+#define BIT_MASK_D_POW_DIV4                   	0x1
+#define BIT_CTRL_D_POW_DIV4(x)                	(((x) & BIT_MASK_D_POW_DIV4) << BIT_SHIFT_D_POW_DIV4)
+
+#define BIT_D_POW_DF1SE_R                     	BIT(3)
+#define BIT_SHIFT_D_POW_DF1SE_R               	3
+#define BIT_MASK_D_POW_DF1SE_R                	0x1
+#define BIT_CTRL_D_POW_DF1SE_R(x)             	(((x) & BIT_MASK_D_POW_DF1SE_R) << BIT_SHIFT_D_POW_DF1SE_R)
+
+#define BIT_D_POW_DF2SE_L                     	BIT(2)
+#define BIT_SHIFT_D_POW_DF2SE_L               	2
+#define BIT_MASK_D_POW_DF2SE_L                	0x1
+#define BIT_CTRL_D_POW_DF2SE_L(x)             	(((x) & BIT_MASK_D_POW_DF2SE_L) << BIT_SHIFT_D_POW_DF2SE_L)
+
+#define BIT_D_POW_DAC_R                       	BIT(1)
+#define BIT_SHIFT_D_POW_DAC_R                 	1
+#define BIT_MASK_D_POW_DAC_R                  	0x1
+#define BIT_CTRL_D_POW_DAC_R(x)               	(((x) & BIT_MASK_D_POW_DAC_R) << BIT_SHIFT_D_POW_DAC_R)
+
+#define BIT_D_POW_DAC_L                       	BIT(0)
+#define BIT_SHIFT_D_POW_DAC_L                 	0
+#define BIT_MASK_D_POW_DAC_L                  	0x1
+#define BIT_CTRL_D_POW_DAC_L(x)               	(((x) & BIT_MASK_D_POW_DAC_L) << BIT_SHIFT_D_POW_DAC_L)
+
+
+//================ Register Reg Field  =========================
+#define REG_DAC0_FIFO_WR 0x0000
+#define REG_DAC_CTRL 0x0004
+#define REG_DAC_INTR_CTRL 0x0008
+#define REG_DAC_INTR_STS 0x000C
+#define REG_DAC_PWR_CTRL 0x0010
+#define REG_DAC_ANAPAR_DA0 0x0014
+#define REG_DAC_ANAPAR_DA1 0x0018
+
+
+//================ DAC HAL related enumeration ==================
+
+
+//================ DAC HAL Macro  ===========================
+#define HAL_DAC_WRITE32(dacidx, addr, value)    HAL_WRITE32(DAC_REG_BASE+dacidx*0x800 \
+                                                        ,addr,value)
+#define HAL_DAC_READ32(dacidx, addr)            HAL_READ32(DAC_REG_BASE+dacidx*0x800,addr)
+
+
+//================ DAC Function Prototypes  =====================
+RTK_STATUS HalDACInit8195a(IN  VOID *Data);
+RTK_STATUS HalDACDeInit8195a(IN  VOID *Data);
+RTK_STATUS HalDACEnableRtl8195a(IN  VOID *Data);
+RTK_STATUS HalDACIntrCtrl8195a(IN  VOID    *Data);
+u8 HalDACSendRtl8195a(IN  VOID    *Data);
+u32 HalDACReadRegRtl8195a(IN  VOID    *Data,IN  u8      I2CReg);
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_gdma.h

@@ -0,0 +1,522 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_GDMA_H_
+#define _RTL8195A_GDMA_H_
+
+// Define GDMA Handshake interface with peripheral, 0 -> GDMA0, 1-> GDMA1
+// Set this Hnadshake interface map to register REG_PESOC_SOC_CTRL
+#define GDMA_HANDSHAKE_UART0_TX             0
+#define GDMA_HANDSHAKE_UART0_RX             1
+#define GDMA_HANDSHAKE_UART1_TX             2
+#define GDMA_HANDSHAKE_UART1_RX             3
+#define GDMA_HANDSHAKE_UART2_TX             14      // Only on GDMA 0, hardware fixed
+#define GDMA_HANDSHAKE_UART2_RX             14      // Only on GDMA 1, hardware fixed
+
+#define GDMA_HANDSHAKE_SSI0_TX              4
+#define GDMA_HANDSHAKE_SSI0_RX              5
+#define GDMA_HANDSHAKE_SSI1_TX              6
+#define GDMA_HANDSHAKE_SSI1_RX              7
+#define GDMA_HANDSHAKE_SSI2_TX              15      // Only on GDMA 0, hardware fixed
+#define GDMA_HANDSHAKE_SSI2_RX              15      // Only on GDMA 1, hardware fixed
+
+#define GDMA_HANDSHAKE_I2C0_TX              8
+#define GDMA_HANDSHAKE_I2C0_RX              9
+#define GDMA_HANDSHAKE_I2C1_TX              10
+#define GDMA_HANDSHAKE_I2C1_RX              11
+
+#define GDMA_HANDSHAKE_ADC                  12
+#define GDMA_HANDSHAKE_DAC0                 13      // Only on GDMA 0, hardware fixed
+#define GDMA_HANDSHAKE_DAC1                 13      // Only on GDMA 1, hardware fixed
+
+#define HAL_GDMAX_READ32(GdmaIndex, addr)     \
+                HAL_READ32(GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF), addr)
+#define HAL_GDMAX_WRITE32(GdmaIndex, addr, value)     \
+                HAL_WRITE32((GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF)), addr, value)
+#define HAL_GDMAX_READ16(GdmaIndex, addr)     \
+                HAL_READ16(GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF), addr)
+#define HAL_GDMAX_WRITE16(GdmaIndex, addr, value)     \
+                HAL_WRITE16(GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF), addr, value)
+#define HAL_GDMAX_READ8(GdmaIndex, addr)     \
+                HAL_READ8(GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF), addr)
+#define HAL_GDMAX_WRITE8(GdmaIndex, addr, value)     \
+                HAL_WRITE8(GDMA0_REG_BASE+ (GdmaIndex*GDMA1_REG_OFF), addr, value)
+
+
+#define GDMA_CH_MAX                 0x06
+
+#define REG_GDMA_CH_OFF                 0x058
+#define REG_GDMA_CH_SAR                 0x000
+#define REG_GDMA_CH_DAR                 0x008
+#define REG_GDMA_CH_LLP                 0x010
+#define REG_GDMA_CH_CTL                 0x018
+#define REG_GDMA_CH_SSTAT               0x020
+#define REG_GDMA_CH_DSTAT               0x028
+#define REG_GDMA_CH_SSTATAR             0x030
+#define REG_GDMA_CH_DSTATAR             0x038
+#define REG_GDMA_CH_CFG                 0x040
+#define REG_GDMA_CH_SGR                 0x048
+#define REG_GDMA_CH_DSR                 0x050
+
+//3 Interrupt Registers
+#define REG_GDMA_RAW_INT_BASE           0x2C0
+#define REG_GDMA_RAW_INT_TFR            0x2C0
+#define REG_GDMA_RAW_INT_BLOCK          0x2c8
+#define REG_GDMA_RAW_INT_SRC_TRAN       0x2D0
+#define REG_GDMA_RAW_INT_DST_TRAN       0x2D8
+#define REG_GDMA_RAW_INT_ERR            0x2E0
+
+#define REG_GDMA_STATUS_INT_BASE        0x2E8
+#define REG_GDMA_STATUS_INT_TFR         0x2E8
+#define REG_GDMA_STATUS_INT_BLOCK       0x2F0
+#define REG_GDMA_STATUS_INT_SRC_TRAN    0x2F8
+#define REG_GDMA_STATUS_INT_DST_TRAN    0x300
+#define REG_GDMA_STATUS_INT_ERR         0x308
+
+#define REG_GDMA_MASK_INT_BASE          0x310
+#define REG_GDMA_MASK_INT_TFR           0x310
+#define REG_GDMA_MASK_INT_BLOCK         0x318
+#define REG_GDMA_MASK_INT_SRC_TRAN      0x320
+#define REG_GDMA_MASK_INT_DST_TRAN      0x328
+#define REG_GDMA_MASK_INT_INT_ERR       0x330
+
+#define REG_GDMA_CLEAR_INT_BASE         0x338
+#define REG_GDMA_CLEAR_INT_TFR          0x338
+#define REG_GDMA_CLEAR_INT_BLOCK        0x340
+#define REG_GDMA_CLEAR_INT_SRC_TRAN     0x348
+#define REG_GDMA_CLEAR_INT_DST_TRAN     0x350
+#define REG_GDMA_CLEAR_INT_ERR          0x358
+#define REG_GDMA_STATUS_INT             0x360
+
+//3 Software handshaking Registers
+#define REG_GDMA_REQ_SRC                0x368
+#define REG_GDMA_REQ_DST                0x370
+#define REG_GDMA_REQ_SGL_REQ            0x378
+#define REG_GDMA_REQ_DST_REQ            0x380
+#define REG_GDMA_REQ_LST_SRC            0x388
+#define REG_GDMA_REQ_LST_DST            0x390
+
+//3 Miscellaneous Registers
+#define REG_GDMA_DMAC_CFG               0x398
+#define REG_GDMA_CH_EN                  0x3A0
+#define REG_GDMA_DMA_ID                 0x3A8
+#define REG_GDMA_DMA_TEST               0x3B0
+#define REG_GDMA_DMA_COM_PARAMS6        0x3C8
+#define REG_GDMA_DMA_COM_PARAMS5        0x3D0
+#define REG_GDMA_DMA_COM_PARAMS4        0x3D8
+#define REG_GDMA_DMA_COM_PARAMS3        0x3E0
+#define REG_GDMA_DMA_COM_PARAMS2        0x3E8
+#define REG_GDMA_DMA_COM_PARAMS1        0x3F0
+#define REG_GDMA_DMA_COM_PARAMS0        0x3F8
+
+//3 CTL Register Bit Control
+#define BIT_SHIFT_CTLX_LO_INT_EN 0
+#define BIT_MASK_CTLX_LO_INT_EN 0x1
+#define BIT_CTLX_LO_INT_EN(x)(((x) & BIT_MASK_CTLX_LO_INT_EN) << BIT_SHIFT_CTLX_LO_INT_EN)
+#define BIT_INVC_CTLX_LO_INT_EN (~(BIT_MASK_CTLX_LO_INT_EN << BIT_SHIFT_CTLX_LO_INT_EN))
+
+#define BIT_SHIFT_CTLX_LO_DST_TR_WIDTH 1
+#define BIT_MASK_CTLX_LO_DST_TR_WIDTH 0x7
+#define BIT_CTLX_LO_DST_TR_WIDTH(x) (((x) & BIT_MASK_CTLX_LO_DST_TR_WIDTH) << BIT_SHIFT_CTLX_LO_DST_TR_WIDTH)
+#define BIT_INVC_CTLX_LO_DST_TR_WIDTH (~(BIT_MASK_CTLX_LO_DST_TR_WIDTH << BIT_SHIFT_CTLX_LO_DST_TR_WIDTH))
+
+#define BIT_SHIFT_CTLX_LO_SRC_TR_WIDTH 4
+#define BIT_MASK_CTLX_LO_SRC_TR_WIDTH 0x7
+#define BIT_CTLX_LO_SRC_TR_WIDTH(x) (((x) & BIT_MASK_CTLX_LO_SRC_TR_WIDTH) << BIT_SHIFT_CTLX_LO_SRC_TR_WIDTH)
+#define BIT_INVC_CTLX_LO_SRC_TR_WIDTH (~(BIT_MASK_CTLX_LO_SRC_TR_WIDTH << BIT_SHIFT_CTLX_LO_SRC_TR_WIDTH))
+
+#define BIT_SHIFT_CTLX_LO_DINC 7
+#define BIT_MASK_CTLX_LO_DINC 0x3
+#define BIT_CTLX_LO_DINC(x)(((x) & BIT_MASK_CTLX_LO_DINC) << BIT_SHIFT_CTLX_LO_DINC)
+#define BIT_INVC_CTLX_LO_DINC (~(BIT_MASK_CTLX_LO_DINC << BIT_SHIFT_CTLX_LO_DINC))
+
+#define BIT_SHIFT_CTLX_LO_SINC 9
+#define BIT_MASK_CTLX_LO_SINC 0x3
+#define BIT_CTLX_LO_SINC(x)(((x) & BIT_MASK_CTLX_LO_SINC) << BIT_SHIFT_CTLX_LO_SINC)
+#define BIT_INVC_CTLX_LO_SINC (~(BIT_MASK_CTLX_LO_SINC << BIT_SHIFT_CTLX_LO_SINC))
+
+#define BIT_SHIFT_CTLX_LO_DEST_MSIZE 11
+#define BIT_MASK_CTLX_LO_DEST_MSIZE 0x7
+#define BIT_CTLX_LO_DEST_MSIZE(x)(((x) & BIT_MASK_CTLX_LO_DEST_MSIZE) << BIT_SHIFT_CTLX_LO_DEST_MSIZE)
+#define BIT_INVC_CTLX_LO_DEST_MSIZE (~(BIT_MASK_CTLX_LO_DEST_MSIZE << BIT_SHIFT_CTLX_LO_DEST_MSIZE))
+
+#define BIT_SHIFT_CTLX_LO_SRC_MSIZE 14
+#define BIT_MASK_CTLX_LO_SRC_MSIZE 0x7
+#define BIT_CTLX_LO_SRC_MSIZE(x)(((x) & BIT_MASK_CTLX_LO_SRC_MSIZE) << BIT_SHIFT_CTLX_LO_SRC_MSIZE)
+#define BIT_INVC_CTLX_LO_SRC_MSIZE (~(BIT_MASK_CTLX_LO_SRC_MSIZE << BIT_SHIFT_CTLX_LO_SRC_MSIZE))
+
+
+#define BIT_SHIFT_CTLX_LO_SRC_GATHER_EN 17
+#define BIT_MASK_CTLX_LO_SRC_GATHER_EN 0x1
+#define BIT_CTLX_LO_SRC_GATHER_EN(x)(((x) & BIT_MASK_CTLX_LO_SRC_GATHER_EN) << BIT_SHIFT_CTLX_LO_SRC_GATHER_EN)
+#define BIT_INVC_CTLX_LO_SRC_GATHER_EN (~(BIT_MASK_CTLX_LO_SRC_GATHER_EN << BIT_SHIFT_CTLX_LO_SRC_GATHER_EN))
+
+
+#define BIT_SHIFT_CTLX_LO_DST_SCATTER_EN 18
+#define BIT_MASK_CTLX_LO_DST_SCATTER_EN 0x1
+#define BIT_CTLX_LO_DST_SCATTER_EN(x)(((x) & BIT_MASK_CTLX_LO_DST_SCATTER_EN) << BIT_SHIFT_CTLX_LO_DST_SCATTER_EN)
+#define BIT_INVC_CTLX_LO_DST_SCATTER_EN (~(BIT_MASK_CTLX_LO_DST_SCATTER_EN << BIT_SHIFT_CTLX_LO_DST_SCATTER_EN))
+
+
+#define BIT_SHIFT_CTLX_LO_TT_FC 20
+#define BIT_MASK_CTLX_LO_TT_FC 0x7
+#define BIT_CTLX_LO_TT_FC(x)(((x) & BIT_MASK_CTLX_LO_TT_FC) << BIT_SHIFT_CTLX_LO_TT_FC)
+#define BIT_INVC_CTLX_LO_TT_FC (~(BIT_MASK_CTLX_LO_TT_FC << BIT_SHIFT_CTLX_LO_TT_FC))
+
+
+#define BIT_SHIFT_CTLX_LO_DMS 23
+#define BIT_MASK_CTLX_LO_DMS 0x3
+#define BIT_CTLX_LO_DMS(x)(((x) & BIT_MASK_CTLX_LO_DMS) << BIT_MASK_CTLX_LO_DMS)
+#define BIT_INVC_CTLX_LO_DMS (~(BIT_MASK_CTLX_LO_DMS << BIT_SHIFT_CTLX_LO_DMS))
+
+
+#define BIT_SHIFT_CTLX_LO_SMS 25
+#define BIT_MASK_CTLX_LO_SMS 0x3
+#define BIT_CTLX_LO_SMS(x)(((x) & BIT_MASK_CTLX_LO_SMS) << BIT_SHIFT_CTLX_LO_SMS)
+#define BIT_INVC_CTLX_LO_SMS (~(BIT_MASK_CTLX_LO_SMS << BIT_SHIFT_CTLX_LO_SMS))
+
+
+#define BIT_SHIFT_CTLX_LO_LLP_DST_EN 27
+#define BIT_MASK_CTLX_LO_LLP_DST_EN 0x1
+#define BIT_CTLX_LO_LLP_DST_EN(x)(((x) & BIT_MASK_CTLX_LO_LLP_DST_EN) << BIT_SHIFT_CTLX_LO_LLP_DST_EN)
+#define BIT_INVC_CTLX_LO_LLP_DST_EN (~(BIT_MASK_CTLX_LO_LLP_DST_EN << BIT_SHIFT_CTLX_LO_LLP_DST_EN))
+
+#define BIT_SHIFT_CTLX_LO_LLP_SRC_EN 28
+#define BIT_MASK_CTLX_LO_LLP_SRC_EN 0x1
+#define BIT_CTLX_LO_LLP_SRC_EN(x)(((x) & BIT_MASK_CTLX_LO_LLP_SRC_EN) << BIT_SHIFT_CTLX_LO_LLP_SRC_EN)
+#define BIT_INVC_CTLX_LO_LLP_SRC_EN (~(BIT_MASK_CTLX_LO_LLP_SRC_EN << BIT_SHIFT_CTLX_LO_LLP_SRC_EN))
+
+
+#define BIT_SHIFT_CTLX_UP_BLOCK_BS 0
+#define BIT_MASK_CTLX_UP_BLOCK_BS 0xFFF
+#define BIT_CTLX_UP_BLOCK_BS(x)(((x) & BIT_MASK_CTLX_UP_BLOCK_BS) << BIT_SHIFT_CTLX_UP_BLOCK_BS)
+#define BIT_INVC_CTLX_UP_BLOCK_BS (~(BIT_MASK_CTLX_UP_BLOCK_BS << BIT_SHIFT_CTLX_UP_BLOCK_BS))
+
+
+#define BIT_SHIFT_CTLX_UP_DONE 12
+#define BIT_MASK_CTLX_UP_DONE 0x1
+#define BIT_CTLX_UP_DONE(x)(((x) & BIT_MASK_CTLX_UP_DONE) << BIT_SHIFT_CTLX_UP_DONE)
+#define BIT_INVC_CTLX_UP_DONE (~(BIT_MASK_CTLX_UP_DONE << BIT_SHIFT_CTLX_UP_DONE))
+
+
+//3 CFG Register Bit Control
+#define BIT_SHIFT_CFGX_LO_CH_PRIOR 5
+#define BIT_MASK_CFGX_LO_CH_PRIOR 0x7
+#define BIT_CFGX_LO_CH_PRIOR(x)(((x) & BIT_MASK_CFGX_LO_CH_PRIOR) << BIT_SHIFT_CFGX_LO_CH_PRIOR)
+#define BIT_INVC_CFGX_LO_CH_PRIOR (~(BIT_MASK_CFGX_LO_CH_PRIOR << BIT_SHIFT_CFGX_LO_CH_PRIOR))
+
+
+#define BIT_SHIFT_CFGX_LO_CH_SUSP 8
+#define BIT_MASK_CFGX_LO_CH_SUSP 0x1
+#define BIT_CFGX_LO_CH_SUSP(x)(((x) & BIT_MASK_CFGX_LO_CH_SUSP) << BIT_SHIFT_CFGX_LO_CH_SUSP)
+#define BIT_INVC_CFGX_LO_CH_SUSP (~(BIT_MASK_CFGX_LO_CH_SUSP << BIT_SHIFT_CFGX_LO_CH_SUSP))
+
+
+#define BIT_SHIFT_CFGX_LO_FIFO_EMPTY 9
+#define BIT_MASK_CFGX_LO_FIFO_EMPTY 0x1
+#define BIT_CFGX_LO_FIFO_EMPTY(x)(((x) & BIT_MASK_CFGX_LO_FIFO_EMPTY) << BIT_SHIFT_CFGX_LO_FIFO_EMPTY)
+#define BIT_INVC_CFGX_LO_FIFO_EMPTY (~(BIT_MASK_CFGX_LO_FIFO_EMPTY << BIT_SHIFT_CFGX_LO_FIFO_EMPTY))
+
+
+#define BIT_SHIFT_CFGX_LO_HS_SEL_DST 10
+#define BIT_MASK_CFGX_LO_HS_SEL_DST 0x1
+#define BIT_CFGX_LO_HS_SEL_DST(x)(((x) & BIT_MASK_CFGX_LO_HS_SEL_DST) << BIT_SHIFT_CFGX_LO_HS_SEL_DST)
+#define BIT_INVC_CFGX_LO_HS_SEL_DST (~(BIT_MASK_CFGX_LO_HS_SEL_DST << BIT_SHIFT_CFGX_LO_HS_SEL_DST))
+
+#define BIT_SHIFT_CFGX_LO_HS_SEL_SRC 11
+#define BIT_MASK_CFGX_LO_HS_SEL_SRC 0x1
+#define BIT_CFGX_LO_HS_SEL_SRC(x)(((x) & BIT_MASK_CFGX_LO_HS_SEL_SRC) << BIT_SHIFT_CFGX_LO_HS_SEL_SRC)
+#define BIT_INVC_CFGX_LO_HS_SEL_SRC (~(BIT_MASK_CFGX_LO_HS_SEL_SRC << BIT_SHIFT_CFGX_LO_HS_SEL_SRC))
+
+#define BIT_SHIFT_CFGX_LO_LOCK_CH_L 12
+#define BIT_MASK_CFGX_LO_LOCK_CH_L 0x3
+#define BIT_CFGX_LO_LOCK_CH_L(x)(((x) & BIT_MASK_CFGX_LO_LOCK_CH_L) << BIT_SHIFT_CFGX_LO_LOCK_CH_L)
+#define BIT_INVC_CFGX_LO_LOCK_CH_L (~(BIT_MASK_CFGX_LO_LOCK_CH_L << BIT_SHIFT_CFGX_LO_LOCK_CH_L))
+
+#define BIT_SHIFT_CFGX_LO_LOCK_B_L 14
+#define BIT_MASK_CFGX_LO_LOCK_B_L 0x3
+#define BIT_CFGX_LO_LOCK_B_L(x)(((x) & BIT_MASK_CFGX_LO_LOCK_B_L) << BIT_SHIFT_CFGX_LO_LOCK_B_L)
+#define BIT_INVC_CFGX_LO_LOCK_B_L (~(BIT_MASK_CFGX_LO_LOCK_B_L << BIT_SHIFT_CFGX_LO_LOCK_B_L))
+
+#define BIT_SHIFT_CFGX_LO_LOCK_CH 16
+#define BIT_MASK_CFGX_LO_LOCK_CH 0x1
+#define BIT_CFGX_LO_LOCK_CH(x)(((x) & BIT_MASK_CFGX_LO_LOCK_CH) << BIT_SHIFT_CFGX_LO_LOCK_CH)
+#define BIT_INVC_CFGX_LO_LOCK_CH (~(BIT_MASK_CFGX_LO_LOCK_CH << BIT_SHIFT_CFGX_LO_LOCK_CH))
+
+#define BIT_SHIFT_CFGX_LO_LOCK_B 17
+#define BIT_MASK_CFGX_LO_LOCK_B 0x1
+#define BIT_CFGX_LO_LOCK_B(x)(((x) & BIT_MASK_CFGX_LO_LOCK_B) << BIT_SHIFT_CFGX_LO_LOCK_B)
+#define BIT_INVC_CFGX_LO_LOCK_B (~(BIT_MASK_CFGX_LO_LOCK_B << BIT_SHIFT_CFGX_LO_LOCK_B))
+
+#define BIT_SHIFT_CFGX_LO_DST_HS_POL 18
+#define BIT_MASK_CFGX_LO_DST_HS_POL 0x1
+#define BIT_CFGX_LO_DST_HS_POL(x)(((x) & BIT_MASK_CFGX_LO_DST_HS_POL) << BIT_SHIFT_CFGX_LO_DST_HS_POL)
+#define BIT_INVC_CFGX_LO_DST_HS_POL (~(BIT_MASK_CFGX_LO_DST_HS_POL << BIT_SHIFT_CFGX_LO_DST_HS_POL))
+
+#define BIT_SHIFT_CFGX_LO_SRC_HS_POL 19
+#define BIT_MASK_CFGX_LO_SRC_HS_POL 0x1
+#define BIT_CFGX_LO_SRC_HS_POL(x)(((x) & BIT_MASK_CFGX_LO_SRC_HS_POL) << BIT_SHIFT_CFGX_LO_SRC_HS_POL)
+#define BIT_INVC_CFGX_LO_SRC_HS_POL (~(BIT_MASK_CFGX_LO_SRC_HS_POL << BIT_SHIFT_CFGX_LO_SRC_HS_POL))
+
+#define BIT_SHIFT_CFGX_LO_MAX_ABRST 20
+#define BIT_MASK_CFGX_LO_MAX_ABRST 0x3FF
+#define BIT_CFGX_LO_MAX_ABRST(x)(((x) & BIT_MASK_CFGX_LO_MAX_ABRST) << BIT_SHIFT_CFGX_LO_MAX_ABRST)
+#define BIT_INVC_CFGX_LO_MAX_ABRST (~(BIT_MASK_CFGX_LO_MAX_ABRST << BIT_SHIFT_CFGX_LO_MAX_ABRST))
+
+#define BIT_SHIFT_CFGX_LO_RELOAD_SRC 30
+#define BIT_MASK_CFGX_LO_RELOAD_SRC 0x1
+#define BIT_CFGX_LO_RELOAD_SRC(x)(((x) & BIT_MASK_CFGX_LO_RELOAD_SRC) << BIT_SHIFT_CFGX_LO_RELOAD_SRC)
+#define BIT_INVC_CFGX_LO_RELOAD_SRC (~(BIT_MASK_CFGX_LO_RELOAD_SRC << BIT_SHIFT_CFGX_LO_RELOAD_SRC))
+
+#define BIT_SHIFT_CFGX_LO_RELOAD_DST 31
+#define BIT_MASK_CFGX_LO_RELOAD_DST 0x1
+#define BIT_CFGX_LO_RELOAD_DST(x)(((x) & BIT_MASK_CFGX_LO_RELOAD_DST) << BIT_SHIFT_CFGX_LO_RELOAD_DST)
+#define BIT_INVC_CFGX_LO_RELOAD_DST (~(BIT_MASK_CFGX_LO_RELOAD_DST << BIT_SHIFT_CFGX_LO_RELOAD_DST))
+
+#define BIT_SHIFT_CFGX_UP_FCMODE 0
+#define BIT_MASK_CFGX_UP_FCMODE 0x1
+#define BIT_CFGX_UP_FCMODE(x)(((x) & BIT_MASK_CFGX_UP_FCMODE) << BIT_SHIFT_CFGX_UP_FCMODE)
+#define BIT_INVC_CFGX_UP_FCMODE (~(BIT_MASK_CFGX_UP_FCMODE << BIT_SHIFT_CFGX_UP_FCMODE))
+
+#define BIT_SHIFT_CFGX_UP_FIFO_MODE 1
+#define BIT_MASK_CFGX_UP_FIFO_MODE 0x1
+#define BIT_CFGX_UP_FIFO_MODE(x)(((x) & BIT_MASK_CFGX_UP_FIFO_MODE) << BIT_SHIFT_CFGX_UP_FIFO_MODE)
+#define BIT_INVC_CFGX_UP_FIFO_MODE (~(BIT_MASK_CFGX_UP_FIFO_MODE << BIT_SHIFT_CFGX_UP_FIFO_MODE))
+
+#define BIT_SHIFT_CFGX_UP_PROTCTL 2
+#define BIT_MASK_CFGX_UP_PROTCTL 0x7
+#define BIT_CFGX_UP_PROTCTL(x)(((x) & BIT_MASK_CFGX_UP_PROTCTL) << BIT_SHIFT_CFGX_UP_PROTCTL)
+#define BIT_INVC_CFGX_UP_PROTCTL (~(BIT_MASK_CFGX_UP_PROTCTL << BIT_SHIFT_CFGX_UP_PROTCTL))
+
+#define BIT_SHIFT_CFGX_UP_DS_UPD_EN 5
+#define BIT_MASK_CFGX_UP_DS_UPD_EN 0x1
+#define BIT_CFGX_UP_DS_UPD_EN(x)(((x) & BIT_MASK_CFGX_UP_DS_UPD_EN) << BIT_SHIFT_CFGX_UP_DS_UPD_EN)
+#define BIT_INVC_CFGX_UP_DS_UPD_EN (~(BIT_MASK_CFGX_UP_DS_UPD_EN << BIT_SHIFT_CFGX_UP_DS_UPD_EN))
+
+#define BIT_SHIFT_CFGX_UP_SS_UPD_EN 6
+#define BIT_MASK_CFGX_UP_SS_UPD_EN 0x1
+#define BIT_CFGX_UP_SS_UPD_EN(x)(((x) & BIT_MASK_CFGX_UP_SS_UPD_EN) << BIT_SHIFT_CFGX_UP_SS_UPD_EN)
+#define BIT_INVC_CFGX_UP_SS_UPD_EN (~(BIT_MASK_CFGX_UP_SS_UPD_EN << BIT_SHIFT_CFGX_UP_SS_UPD_EN))
+
+#define BIT_SHIFT_CFGX_UP_SRC_PER 7
+#define BIT_MASK_CFGX_UP_SRC_PER 0xF
+#define BIT_CFGX_UP_SRC_PER(x)(((x) & BIT_MASK_CFGX_UP_SRC_PER) << BIT_SHIFT_CFGX_UP_SRC_PER)
+#define BIT_INVC_CFGX_UP_SRC_PER (~(BIT_MASK_CFGX_UP_SRC_PER << BIT_SHIFT_CFGX_UP_SRC_PER))
+
+#define BIT_SHIFT_CFGX_UP_DEST_PER 11
+#define BIT_MASK_CFGX_UP_DEST_PER 0xF
+#define BIT_CFGX_UP_DEST_PER(x)(((x) & BIT_MASK_CFGX_UP_DEST_PER) << BIT_SHIFT_CFGX_UP_DEST_PER)
+#define BIT_INVC_CFGX_UP_DEST_PER (~(BIT_MASK_CFGX_UP_DEST_PER << BIT_SHIFT_CFGX_UP_DEST_PER))
+
+typedef enum _GDMA_CHANNEL_NUM_ {
+        GdmaNoCh    = 0x0000,
+        GdmaCh0     = 0x0101,
+        GdmaCh1     = 0x0202,
+        GdmaCh2     = 0x0404,
+        GdmaCh3     = 0x0808,
+        GdmaCh4     = 0x1010,
+        GdmaCh5     = 0x2020,
+        GdmaCh6     = 0x4040,
+        GdmaCh7     = 0x8080,
+        GdmaAllCh   = 0xffff
+}GDMA_CHANNEL_NUM, *PGDMA_CHANNEL_NUM;
+
+
+//3 CTL register struct
+
+typedef enum _GDMA_CTL_TT_FC_TYPE_ {
+        TTFCMemToMem    = 0x00,
+        TTFCMemToPeri   = 0x01,
+        TTFCPeriToMem   = 0x02
+}GDMA_CTL_TT_FC_TYPE, *PGDMA_CTL_TT_FC_TYPE;
+
+//Max type = Bus Width
+typedef enum _GDMA_CTL_TR_WIDTH_ {
+        TrWidthOneByte    = 0x00,
+        TrWidthTwoBytes   = 0x01,
+        TrWidthFourBytes  = 0x02
+}GDMA_CTL_TR_WIDTH, *PGDMA_CTL_TR_WIDTH;
+
+typedef enum _GDMA_CTL_MSIZE_ {
+        MsizeOne        = 0x00,
+        MsizeFour       = 0x01,
+        MsizeEight      = 0x02
+}GDMA_CTL_MSIZE, *PGDMA_CTL_MSIZE;
+
+typedef enum _GDMA_INC_TYPE_ {
+        IncType         = 0x00,
+        DecType         = 0x01,
+        NoChange        = 0x02
+}GDMA_INC_TYPE, *PGDMA_INC_TYPE;
+
+
+typedef struct _GDMA_CTL_REG_ {
+        GDMA_CTL_TT_FC_TYPE     TtFc;
+        GDMA_CTL_TR_WIDTH       DstTrWidth;
+        GDMA_CTL_TR_WIDTH       SrcTrWidth;
+        GDMA_INC_TYPE           Dinc;
+        GDMA_INC_TYPE           Sinc;
+        GDMA_CTL_MSIZE          DestMsize;
+        GDMA_CTL_MSIZE          SrcMsize;
+
+        u8                      IntEn           :1; // Bit 0
+        u8                      SrcGatherEn     :1; // Bit 1
+        u8                      DstScatterEn    :1; // Bit 2
+        u8                      LlpDstEn        :1; // Bit 3
+        u8                      LlpSrcEn        :1; // Bit 4
+        u8                      Done            :1; // Bit 5
+        u8                      Rsvd6To7        :2; //Bit 6 -7
+        u16                     BlockSize;
+        
+}GDMA_CTL_REG, *PGDMA_CTL_REG;
+
+
+//3 CFG Register Structure
+
+typedef enum _GDMA_CH_PRIORITY_ {
+    Prior0          = 0,
+    Prior1          = 1,
+    Prior2          = 2,
+    Prior3          = 3,
+    Prior4          = 4,
+    Prior5          = 5,
+    Prior6          = 6,
+    Prior7          = 7
+}GDMA_CH_PRIORITY, *PGDMA_CH_PRIORITY;
+
+typedef enum _GDMA_LOCK_LEVEL_ {
+    OverComplDmaTransfer        = 0x00,
+    OverComplDmaBlockTransfer   = 0x01,
+    OverComplDmaTransation      = 0x02
+}GDMA_LOCK_LEVEL, *PGDMA_LOCK_LEVEL;
+
+
+typedef struct _GDMA_CFG_REG_ {
+    GDMA_CH_PRIORITY        ChPrior;
+    GDMA_LOCK_LEVEL         LockBL;     
+    GDMA_LOCK_LEVEL         LockChL;     
+    u16                     MaxAbrst;
+    u8                      SrcPer;
+    u8                      DestPer;
+    u16                     ChSusp      :1; //Bit 0
+    u16                     FifoEmpty   :1; //Bit 1
+    u16                     HsSelDst    :1; //Bit 2
+    u16                     HsSelSrc    :1; //Bit 3
+    u16                     LockCh      :1; //Bit 4
+    u16                     LockB       :1; //Bit 5
+    u16                     DstHsPol    :1; //Bit 6
+    u16                     SrcHsPol    :1; //Bit 7
+    u16                     ReloadSrc   :1; //Bit 8
+    u16                     ReloadDst   :1; //Bit 9
+    u16                     FifoMode    :1; //Bit 10
+    u16                     DsUpdEn     :1; //Bit 11
+    u16                     SsUpdEn     :1; //Bit 12
+    u16                     Rsvd13To15  :3;
+}GDMA_CFG_REG, *PGDMA_CFG_REG;
+
+typedef enum _GDMA_ISR_TYPE_ {
+    TransferType        = 0x1,
+    BlockType           = 0x2,
+    SrcTransferType     = 0x4,
+    DstTransferType     = 0x8,
+    ErrType             = 0x10
+}GDMA_ISR_TYPE, *PGDMA_ISR_TYPE;
+
+
+VOID
+HalGdmaOnOffRtl8195a (
+    IN  VOID              *Data
+);
+
+BOOL
+HalGdamChInitRtl8195a(
+    IN  VOID     *Data
+);
+
+BOOL
+HalGdmaChSetingRtl8195a(
+    IN  VOID     *Data
+);
+
+BOOL
+HalGdmaChBlockSetingRtl8195a(
+    IN  VOID     *Data
+);
+
+
+VOID
+HalGdmaChDisRtl8195a (
+    IN  VOID              *Data
+);
+
+VOID
+HalGdmaChEnRtl8195a (
+    IN  VOID              *Data
+);
+
+VOID
+HalGdmaChIsrEnAndDisRtl8195a (
+    IN  VOID              *Data
+);
+
+u8
+HalGdmaChIsrCleanRtl8195a (
+    IN  VOID              *Data
+);
+
+VOID
+HalGdmaChCleanAutoSrcRtl8195a (
+    IN  VOID              *Data
+);
+
+VOID
+HalGdmaChCleanAutoDstRtl8195a (
+    IN  VOID              *Data
+); 
+
+u32
+HalGdmaQueryDArRtl8195a(
+    IN  VOID     *Data
+);
+
+u32
+HalGdmaQuerySArRtl8195a(
+    IN  VOID     *Data
+);
+
+BOOL
+HalGdmaQueryChEnRtl8195a (
+    IN  VOID              *Data
+);
+
+#ifdef CONFIG_CHIP_E_CUT
+_LONG_CALL_ BOOL
+HalGdmaChBlockSetingRtl8195a_V04(
+    IN  VOID     *Data
+);
+
+_LONG_CALL_ u32
+HalGdmaQueryDArRtl8195a_V04(
+    IN  VOID     *Data
+);
+
+_LONG_CALL_ u32
+HalGdmaQuerySArRtl8195a_V04(
+    IN  VOID     *Data
+);
+
+_LONG_CALL_ BOOL
+HalGdmaQueryChEnRtl8195a_V04 (
+    IN  VOID      *Data
+);
+
+#endif  // #ifdef CONFIG_CHIP_E_CUT
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_gpio.h

@@ -0,0 +1,352 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_GPIO_H_
+#define _RTL8195A_GPIO_H_
+
+#include "hal_api.h"
+#include "hal_gpio.h"
+
+#define GPIO_PORTA_DR           0x00        // data register
+#define GPIO_PORTA_DDR          0x04        // data direction
+#define GPIO_PORTA_CTRL         0x08        // data source control, we should keep it as default: data source from software
+
+#define GPIO_PORTB_DR           0x0c        // data register
+#define GPIO_PORTB_DDR          0x10        // data direction
+#define GPIO_PORTB_CTRL         0x14        // data source control, we should keep it as default: data source from software
+
+#define GPIO_PORTC_DR           0x18        // data register
+#define GPIO_PORTC_DDR          0x1c        // data direction
+#define GPIO_PORTC_CTRL         0x20        // data source control, we should keep it as default: data source from software
+
+//1 Only the PORTA can be configured to generate interrupts
+#define GPIO_INT_EN             0x30        // Interrupt enable register
+#define GPIO_INT_MASK           0x34        // Interrupt mask
+#define GPIO_INT_TYPE           0x38        // Interrupt type(level/edge) register
+#define GPIO_INT_POLARITY       0x3C        // Interrupt polarity(Active low/high) register
+#define GPIO_INT_STATUS         0x40        // Interrupt status
+#define GPIO_INT_RAWSTATUS      0x44        // Interrupt status without mask
+#define GPIO_DEBOUNCE           0x48        // Interrupt signal debounce
+#define GPIO_PORTA_EOI          0x4c        // Clear interrupt
+
+#define GPIO_EXT_PORTA          0x50        // GPIO IN read or OUT read back
+#define GPIO_EXT_PORTB          0x54        // GPIO IN read or OUT read back
+#define GPIO_EXT_PORTC          0x58        // GPIO IN read or OUT read back
+
+#define GPIO_INT_SYNC           0x60        // Is level-sensitive interrupt being sync sith PCLK
+
+enum {
+    HAL_GPIO_HIGHZ      = 0,
+    HAL_GPIO_PULL_LOW   = 1,
+    HAL_GPIO_PULL_HIGH  = 2
+};
+
+//======================================================
+// ROM Function prototype
+extern PHAL_GPIO_ADAPTER _pHAL_Gpio_Adapter;
+
+static __inline HAL_Status
+GPIO_Lock (
+    VOID
+)
+{
+    HAL_Status Status;
+
+    if (_pHAL_Gpio_Adapter->EnterCritical) {
+        _pHAL_Gpio_Adapter->EnterCritical();
+    }
+
+    if(_pHAL_Gpio_Adapter->Locked) {
+       Status = HAL_BUSY;
+    }
+    else {
+       _pHAL_Gpio_Adapter->Locked = 1;
+       Status = HAL_OK;
+    }
+
+    if (_pHAL_Gpio_Adapter->ExitCritical) {
+        _pHAL_Gpio_Adapter->ExitCritical();
+    }
+
+    return Status;
+}
+
+
+static __inline VOID
+GPIO_UnLock (
+    VOID
+)
+{
+    if (_pHAL_Gpio_Adapter->EnterCritical) {
+        _pHAL_Gpio_Adapter->EnterCritical();
+    }
+
+    _pHAL_Gpio_Adapter->Locked = 0;
+
+    if (_pHAL_Gpio_Adapter->ExitCritical) {
+        _pHAL_Gpio_Adapter->ExitCritical();
+    }
+}
+
+
+_LONG_CALL_ extern u32
+HAL_GPIO_IrqHandler_8195a(
+    IN VOID *pData
+);
+
+_LONG_CALL_ extern u32
+HAL_GPIO_MbedIrqHandler_8195a(
+    IN VOID *pData
+);
+
+_LONG_CALL_ HAL_Status 
+HAL_GPIO_IntCtrl_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin, 
+    u32 En
+);
+
+_LONG_CALL_ HAL_Status 
+HAL_GPIO_Init_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_Status 
+HAL_GPIO_DeInit_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_GPIO_PIN_STATE 
+HAL_GPIO_ReadPin_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_Status 
+HAL_GPIO_WritePin_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin,
+    HAL_GPIO_PIN_STATE Pin_State
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_RegIrq_8195a(
+    IN PIRQ_HANDLE pIrqHandle
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_UnRegIrq_8195a(
+    IN PIRQ_HANDLE pIrqHandle
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_UserRegIrq_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin,
+    VOID *IrqHandler,
+    VOID *IrqData
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_UserUnRegIrq_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_MaskIrq_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_UnMaskIrq_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_IntDebounce_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin,
+    u8 Enable
+);
+
+_LONG_CALL_ u32
+HAL_GPIO_GetIPPinName_8195a(
+    u32 chip_pin
+);
+
+_LONG_CALL_ HAL_Status
+HAL_GPIO_PullCtrl_8195a(
+    u32 chip_pin,
+    u8 pull_type
+);
+
+_LONG_CALL_ u32 
+GPIO_GetChipPinName_8195a(
+    u32 port,
+    u32 pin
+);
+
+_LONG_CALL_ VOID 
+GPIO_PullCtrl_8195a(
+    u32 chip_pin,
+    u8 pull_type
+);
+
+_LONG_CALL_ VOID 
+GPIO_Int_SetType_8195a(
+    u8 pin_num,
+    u8 int_mode
+);
+
+
+_LONG_CALL_  HAL_Status HAL_GPIO_IntCtrl_8195aV02(HAL_GPIO_PIN  *GPIO_Pin, u32 En);
+_LONG_CALL_ u32 GPIO_Int_Clear_8195aV02(u32 irq_clr);
+
+HAL_Status
+HAL_GPIO_ClearISR_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+);
+
+
+/********** HAL In-Line Functions **********/
+
+/**
+  * @brief  De-Initializes a GPIO Pin, reset it as default setting.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval HAL_Status
+  */
+static __inline VOID 
+HAL_GPIO_DeInit(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    HAL_GPIO_DeInit_8195a(GPIO_Pin);
+}
+
+/**
+  * @brief  Reads the specified input port pin.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval The input port pin current status(High or Low).
+  */
+static __inline s32 
+HAL_GPIO_ReadPin(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    return (s32)HAL_GPIO_ReadPin_8195a(GPIO_Pin);    
+}
+
+/**
+  * @brief  Write the specified output port pin.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @param  Pin_State: The state going to be set to the assigned GPIO pin.
+  *
+  * @retval None
+  */
+static __inline VOID 
+HAL_GPIO_WritePin(
+    HAL_GPIO_PIN  *GPIO_Pin,
+    u32 Value
+)
+{
+    HAL_GPIO_WritePin_8195a(GPIO_Pin, (HAL_GPIO_PIN_STATE)Value);
+}
+
+/**
+  * @brief  To register a user interrupt handler for a specified pin
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @param  IrqHandler: The IRQ handler to be assigned to the specified pin
+  *
+  * @param  IrqData: The pointer will be pass the the IRQ handler
+  *
+  * @retval None
+  */
+static __inline VOID
+HAL_GPIO_UserRegIrq(
+    HAL_GPIO_PIN  *GPIO_Pin,
+    VOID *IrqHandler,
+    VOID *IrqData
+)
+{
+    HAL_GPIO_UserRegIrq_8195a(GPIO_Pin, IrqHandler, IrqData);
+}
+
+/**
+  * @brief  To un-register a user interrupt handler for a specified pin
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval None
+  */
+static __inline VOID
+HAL_GPIO_UserUnRegIrq(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    HAL_GPIO_UserUnRegIrq_8195a(GPIO_Pin);
+}
+
+
+/**
+  * @brief  Enable/Disable GPIO interrupt
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin initialization.
+  *
+  * @param  En: Enable (1) or Disable (0)
+  *
+  * @retval HAL_Status
+  */
+static __inline VOID
+HAL_GPIO_IntCtrl(
+    HAL_GPIO_PIN  *GPIO_Pin, 
+    u32 En
+)
+{
+    HAL_GPIO_IntCtrl_8195a(GPIO_Pin, En);
+}
+
+/**
+  * @brief  Mask the interrupt of a specified pin
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval None
+  */
+static __inline VOID
+HAL_GPIO_MaskIrq(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    HAL_GPIO_MaskIrq_8195a(GPIO_Pin);
+}
+
+
+/**
+  * @brief  UnMask the interrupt of a specified pin
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval None
+  */
+static __inline VOID
+HAL_GPIO_UnMaskIrq(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    HAL_GPIO_ClearISR_8195a(GPIO_Pin);
+    HAL_GPIO_UnMaskIrq_8195a(GPIO_Pin);
+}
+
+
+#endif  // end of "#define _RTL8195A_GPIO_H_"
+

lib/fwlib/rtl8195a/rtl8195a_i2c.h

@@ -0,0 +1,851 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_I2C_H_
+#define _RTL8195A_I2C_H_
+
+#include "hal_api.h"
+
+//================ Register Bit Field ==================
+//2 REG_DW_I2C_IC_CON
+#define BIT_IC_CON_IC_SLAVE_DISABLE           	BIT(6)
+#define BIT_SHIFT_IC_CON_IC_SLAVE_DISABLE     	6
+#define BIT_MASK_IC_CON_IC_SLAVE_DISABLE      	0x1
+#define BIT_CTRL_IC_CON_IC_SLAVE_DISABLE(x)   	(((x) & BIT_MASK_IC_CON_IC_SLAVE_DISABLE) << BIT_SHIFT_IC_CON_IC_SLAVE_DISABLE)
+
+#define BIT_IC_CON_IC_RESTART_EN              	BIT(5)
+#define BIT_SHIFT_IC_CON_IC_RESTART_EN        	5
+#define BIT_MASK_IC_CON_IC_RESTART_EN         	0x1
+#define BIT_CTRL_IC_CON_IC_RESTART_EN(x)      	(((x) & BIT_MASK_IC_CON_IC_RESTART_EN) << BIT_SHIFT_IC_CON_IC_RESTART_EN)
+
+#define BIT_IC_CON_IC_10BITADDR_MASTER        	BIT(4)
+#define BIT_SHIFT_IC_CON_IC_10BITADDR_MASTER  	4
+#define BIT_MASK_IC_CON_IC_10BITADDR_MASTER   	0x1
+#define BIT_CTRL_IC_CON_IC_10BITADDR_MASTER(x)	(((x) & BIT_MASK_IC_CON_IC_10BITADDR_MASTER) << BIT_SHIFT_IC_CON_IC_10BITADDR_MASTER)
+
+#define BIT_IC_CON_IC_10BITADDR_SLAVE         	BIT(3)
+#define BIT_SHIFT_IC_CON_IC_10BITADDR_SLAVE   	3
+#define BIT_MASK_IC_CON_IC_10BITADDR_SLAVE    	0x1
+#define BIT_CTRL_IC_CON_IC_10BITADDR_SLAVE(x) 	(((x) & BIT_MASK_IC_CON_IC_10BITADDR_SLAVE) << BIT_SHIFT_IC_CON_IC_10BITADDR_SLAVE)
+
+
+#define BIT_SHIFT_IC_CON_SPEED 1
+#define BIT_MASK_IC_CON_SPEED 0x3
+#define BIT_IC_CON_SPEED(x)                   	(((x) & BIT_MASK_IC_CON_SPEED) << BIT_SHIFT_IC_CON_SPEED)
+#define BIT_CTRL_IC_CON_SPEED(x)              	(((x) & BIT_MASK_IC_CON_SPEED) << BIT_SHIFT_IC_CON_SPEED)
+#define BIT_GET_IC_CON_SPEED(x)               	(((x) >> BIT_SHIFT_IC_CON_SPEED) & BIT_MASK_IC_CON_SPEED)
+
+#define BIT_IC_CON_MASTER_MODE                	BIT(0)
+#define BIT_SHIFT_IC_CON_MASTER_MODE          	0
+#define BIT_MASK_IC_CON_MASTER_MODE           	0x1
+#define BIT_CTRL_IC_CON_MASTER_MODE(x)        	(((x) & BIT_MASK_IC_CON_MASTER_MODE) << BIT_SHIFT_IC_CON_MASTER_MODE)
+
+
+//2 REG_DW_I2C_IC_TAR
+#define BIT_IC_TAR_IC_10BITADDR_MASTER        	BIT(12)
+#define BIT_SHIFT_IC_TAR_IC_10BITADDR_MASTER  	12
+#define BIT_MASK_IC_TAR_IC_10BITADDR_MASTER   	0x1
+#define BIT_CTRL_IC_TAR_IC_10BITADDR_MASTER(x)	(((x) & BIT_MASK_IC_TAR_IC_10BITADDR_MASTER) << BIT_SHIFT_IC_TAR_IC_10BITADDR_MASTER)
+
+#define BIT_IC_TAR_SPECIAL                    	BIT(11)
+#define BIT_SHIFT_IC_TAR_SPECIAL              	11
+#define BIT_MASK_IC_TAR_SPECIAL               	0x1
+#define BIT_CTRL_IC_TAR_SPECIAL(x)            	(((x) & BIT_MASK_IC_TAR_SPECIAL) << BIT_SHIFT_IC_TAR_SPECIAL)
+
+#define BIT_IC_TAR_GC_OR_START                	BIT(10)
+#define BIT_SHIFT_IC_TAR_GC_OR_START          	10
+#define BIT_MASK_IC_TAR_GC_OR_START           	0x1
+#define BIT_CTRL_IC_TAR_GC_OR_START(x)        	(((x) & BIT_MASK_IC_TAR_GC_OR_START) << BIT_SHIFT_IC_TAR_GC_OR_START)
+
+
+#define BIT_SHIFT_IC_TAR 0
+#define BIT_MASK_IC_TAR 0x3ff
+#define BIT_IC_TAR(x)                         	(((x) & BIT_MASK_IC_TAR) << BIT_SHIFT_IC_TAR)
+#define BIT_CTRL_IC_TAR(x)                    	(((x) & BIT_MASK_IC_TAR) << BIT_SHIFT_IC_TAR)
+#define BIT_GET_IC_TAR(x)                     	(((x) >> BIT_SHIFT_IC_TAR) & BIT_MASK_IC_TAR)
+
+
+//2 REG_DW_I2C_IC_SAR
+
+#define BIT_SHIFT_IC_SAR 0
+#define BIT_MASK_IC_SAR 0x3ff
+#define BIT_IC_SAR(x)                         	(((x) & BIT_MASK_IC_SAR) << BIT_SHIFT_IC_SAR)
+#define BIT_CTRL_IC_SAR(x)                    	(((x) & BIT_MASK_IC_SAR) << BIT_SHIFT_IC_SAR)
+#define BIT_GET_IC_SAR(x)                     	(((x) >> BIT_SHIFT_IC_SAR) & BIT_MASK_IC_SAR)
+
+
+//2 REG_DW_I2C_IC_HS_MADDR
+
+#define BIT_SHIFT_IC_HS_MADDR 0
+#define BIT_MASK_IC_HS_MADDR 0x7
+#define BIT_IC_HS_MADDR(x)                    	(((x) & BIT_MASK_IC_HS_MADDR) << BIT_SHIFT_IC_HS_MADDR)
+#define BIT_CTRL_IC_HS_MADDR(x)               	(((x) & BIT_MASK_IC_HS_MADDR) << BIT_SHIFT_IC_HS_MADDR)
+#define BIT_GET_IC_HS_MADDR(x)                	(((x) >> BIT_SHIFT_IC_HS_MADDR) & BIT_MASK_IC_HS_MADDR)
+
+
+//2 REG_DW_I2C_IC_DATA_CMD
+#define BIT_IC_DATA_CMD_RESTART               	BIT(10)
+#define BIT_SHIFT_IC_DATA_CMD_RESTART         	10
+#define BIT_MASK_IC_DATA_CMD_RESTART          	0x1
+#define BIT_CTRL_IC_DATA_CMD_RESTART(x)       	(((x) & BIT_MASK_IC_DATA_CMD_RESTART) << BIT_SHIFT_IC_DATA_CMD_RESTART)
+
+#define BIT_IC_DATA_CMD_STOP                  	BIT(9)
+#define BIT_SHIFT_IC_DATA_CMD_STOP            	9
+#define BIT_MASK_IC_DATA_CMD_STOP             	0x1
+#define BIT_CTRL_IC_DATA_CMD_STOP(x)          	(((x) & BIT_MASK_IC_DATA_CMD_STOP) << BIT_SHIFT_IC_DATA_CMD_STOP)
+
+#define BIT_IC_DATA_CMD_CMD                   	BIT(8)
+#define BIT_SHIFT_IC_DATA_CMD_CMD             	8
+#define BIT_MASK_IC_DATA_CMD_CMD              	0x1
+#define BIT_CTRL_IC_DATA_CMD_CMD(x)           	(((x) & BIT_MASK_IC_DATA_CMD_CMD) << BIT_SHIFT_IC_DATA_CMD_CMD)
+
+
+#define BIT_SHIFT_IC_DATA_CMD_DAT 0
+#define BIT_MASK_IC_DATA_CMD_DAT 0xff
+#define BIT_IC_DATA_CMD_DAT(x)                	(((x) & BIT_MASK_IC_DATA_CMD_DAT) << BIT_SHIFT_IC_DATA_CMD_DAT)
+#define BIT_CTRL_IC_DATA_CMD_DAT(x)           	(((x) & BIT_MASK_IC_DATA_CMD_DAT) << BIT_SHIFT_IC_DATA_CMD_DAT)
+#define BIT_GET_IC_DATA_CMD_DAT(x)            	(((x) >> BIT_SHIFT_IC_DATA_CMD_DAT) & BIT_MASK_IC_DATA_CMD_DAT)
+
+
+//2 REG_DW_I2C_IC_SS_SCL_HCNT
+
+#define BIT_SHIFT_IC_SS_SCL_HCNT 0
+#define BIT_MASK_IC_SS_SCL_HCNT 0xffff
+#define BIT_IC_SS_SCL_HCNT(x)                 	(((x) & BIT_MASK_IC_SS_SCL_HCNT) << BIT_SHIFT_IC_SS_SCL_HCNT)
+#define BIT_CTRL_IC_SS_SCL_HCNT(x)            	(((x) & BIT_MASK_IC_SS_SCL_HCNT) << BIT_SHIFT_IC_SS_SCL_HCNT)
+#define BIT_GET_IC_SS_SCL_HCNT(x)             	(((x) >> BIT_SHIFT_IC_SS_SCL_HCNT) & BIT_MASK_IC_SS_SCL_HCNT)
+
+
+//2 REG_DW_I2C_IC_SS_SCL_LCNT
+
+#define BIT_SHIFT_IC_SS_SCL_LCNT 0
+#define BIT_MASK_IC_SS_SCL_LCNT 0xffff
+#define BIT_IC_SS_SCL_LCNT(x)                 	(((x) & BIT_MASK_IC_SS_SCL_LCNT) << BIT_SHIFT_IC_SS_SCL_LCNT)
+#define BIT_CTRL_IC_SS_SCL_LCNT(x)            	(((x) & BIT_MASK_IC_SS_SCL_LCNT) << BIT_SHIFT_IC_SS_SCL_LCNT)
+#define BIT_GET_IC_SS_SCL_LCNT(x)             	(((x) >> BIT_SHIFT_IC_SS_SCL_LCNT) & BIT_MASK_IC_SS_SCL_LCNT)
+
+
+//2 REG_DW_I2C_IC_FS_SCL_HCNT
+
+#define BIT_SHIFT_IC_FS_SCL_HCNT 0
+#define BIT_MASK_IC_FS_SCL_HCNT 0xffff
+#define BIT_IC_FS_SCL_HCNT(x)                 	(((x) & BIT_MASK_IC_FS_SCL_HCNT) << BIT_SHIFT_IC_FS_SCL_HCNT)
+#define BIT_CTRL_IC_FS_SCL_HCNT(x)            	(((x) & BIT_MASK_IC_FS_SCL_HCNT) << BIT_SHIFT_IC_FS_SCL_HCNT)
+#define BIT_GET_IC_FS_SCL_HCNT(x)             	(((x) >> BIT_SHIFT_IC_FS_SCL_HCNT) & BIT_MASK_IC_FS_SCL_HCNT)
+
+
+//2 REG_DW_I2C_IC_FS_SCL_LCNT
+
+#define BIT_SHIFT_IC_FS_SCL_LCNT 0
+#define BIT_MASK_IC_FS_SCL_LCNT 0xffff
+#define BIT_IC_FS_SCL_LCNT(x)                 	(((x) & BIT_MASK_IC_FS_SCL_LCNT) << BIT_SHIFT_IC_FS_SCL_LCNT)
+#define BIT_CTRL_IC_FS_SCL_LCNT(x)            	(((x) & BIT_MASK_IC_FS_SCL_LCNT) << BIT_SHIFT_IC_FS_SCL_LCNT)
+#define BIT_GET_IC_FS_SCL_LCNT(x)             	(((x) >> BIT_SHIFT_IC_FS_SCL_LCNT) & BIT_MASK_IC_FS_SCL_LCNT)
+
+
+//2 REG_DW_I2C_IC_HS_SCL_HCNT
+
+#define BIT_SHIFT_IC_HS_SCL_HCNT 0
+#define BIT_MASK_IC_HS_SCL_HCNT 0xffff
+#define BIT_IC_HS_SCL_HCNT(x)                 	(((x) & BIT_MASK_IC_HS_SCL_HCNT) << BIT_SHIFT_IC_HS_SCL_HCNT)
+#define BIT_CTRL_IC_HS_SCL_HCNT(x)            	(((x) & BIT_MASK_IC_HS_SCL_HCNT) << BIT_SHIFT_IC_HS_SCL_HCNT)
+#define BIT_GET_IC_HS_SCL_HCNT(x)             	(((x) >> BIT_SHIFT_IC_HS_SCL_HCNT) & BIT_MASK_IC_HS_SCL_HCNT)
+
+
+//2 REG_DW_I2C_IC_HS_SCL_LCNT
+
+#define BIT_SHIFT_IC_HS_SCL_LCNT 0
+#define BIT_MASK_IC_HS_SCL_LCNT 0xffff
+#define BIT_IC_HS_SCL_LCNT(x)                 	(((x) & BIT_MASK_IC_HS_SCL_LCNT) << BIT_SHIFT_IC_HS_SCL_LCNT)
+#define BIT_CTRL_IC_HS_SCL_LCNT(x)            	(((x) & BIT_MASK_IC_HS_SCL_LCNT) << BIT_SHIFT_IC_HS_SCL_LCNT)
+#define BIT_GET_IC_HS_SCL_LCNT(x)             	(((x) >> BIT_SHIFT_IC_HS_SCL_LCNT) & BIT_MASK_IC_HS_SCL_LCNT)
+
+
+//2 REG_DW_I2C_IC_INTR_STAT
+#define BIT_IC_INTR_STAT_R_GEN_CALL           	BIT(11)
+#define BIT_SHIFT_IC_INTR_STAT_R_GEN_CALL     	11
+#define BIT_MASK_IC_INTR_STAT_R_GEN_CALL      	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_GEN_CALL(x)   	(((x) & BIT_MASK_IC_INTR_STAT_R_GEN_CALL) << BIT_SHIFT_IC_INTR_STAT_R_GEN_CALL)
+
+#define BIT_IC_INTR_STAT_R_START_DET          	BIT(10)
+#define BIT_SHIFT_IC_INTR_STAT_R_START_DET    	10
+#define BIT_MASK_IC_INTR_STAT_R_START_DET     	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_START_DET(x)  	(((x) & BIT_MASK_IC_INTR_STAT_R_START_DET) << BIT_SHIFT_IC_INTR_STAT_R_START_DET)
+
+#define BIT_IC_INTR_STAT_R_STOP_DET           	BIT(9)
+#define BIT_SHIFT_IC_INTR_STAT_R_STOP_DET     	9
+#define BIT_MASK_IC_INTR_STAT_R_STOP_DET      	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_STOP_DET(x)   	(((x) & BIT_MASK_IC_INTR_STAT_R_STOP_DET) << BIT_SHIFT_IC_INTR_STAT_R_STOP_DET)
+
+#define BIT_IC_INTR_STAT_R_ACTIVITY           	BIT(8)
+#define BIT_SHIFT_IC_INTR_STAT_R_ACTIVITY     	8
+#define BIT_MASK_IC_INTR_STAT_R_ACTIVITY      	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_ACTIVITY(x)   	(((x) & BIT_MASK_IC_INTR_STAT_R_ACTIVITY) << BIT_SHIFT_IC_INTR_STAT_R_ACTIVITY)
+
+#define BIT_IC_INTR_STAT_R_RX_DONE            	BIT(7)
+#define BIT_SHIFT_IC_INTR_STAT_R_RX_DONE      	7
+#define BIT_MASK_IC_INTR_STAT_R_RX_DONE       	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_RX_DONE(x)    	(((x) & BIT_MASK_IC_INTR_STAT_R_RX_DONE) << BIT_SHIFT_IC_INTR_STAT_R_RX_DONE)
+
+#define BIT_IC_INTR_STAT_R_TX_ABRT            	BIT(6)
+#define BIT_SHIFT_IC_INTR_STAT_R_TX_ABRT      	6
+#define BIT_MASK_IC_INTR_STAT_R_TX_ABRT       	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_TX_ABRT(x)    	(((x) & BIT_MASK_IC_INTR_STAT_R_TX_ABRT) << BIT_SHIFT_IC_INTR_STAT_R_TX_ABRT)
+
+#define BIT_IC_INTR_STAT_R_RD_REQ             	BIT(5)
+#define BIT_SHIFT_IC_INTR_STAT_R_RD_REQ       	5
+#define BIT_MASK_IC_INTR_STAT_R_RD_REQ        	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_RD_REQ(x)     	(((x) & BIT_MASK_IC_INTR_STAT_R_RD_REQ) << BIT_SHIFT_IC_INTR_STAT_R_RD_REQ)
+
+#define BIT_IC_INTR_STAT_R_TX_EMPTY           	BIT(4)
+#define BIT_SHIFT_IC_INTR_STAT_R_TX_EMPTY     	4
+#define BIT_MASK_IC_INTR_STAT_R_TX_EMPTY      	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_TX_EMPTY(x)   	(((x) & BIT_MASK_IC_INTR_STAT_R_TX_EMPTY) << BIT_SHIFT_IC_INTR_STAT_R_TX_EMPTY)
+
+#define BIT_IC_INTR_STAT_R_TX_OVER            	BIT(3)
+#define BIT_SHIFT_IC_INTR_STAT_R_TX_OVER      	3
+#define BIT_MASK_IC_INTR_STAT_R_TX_OVER       	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_TX_OVER(x)    	(((x) & BIT_MASK_IC_INTR_STAT_R_TX_OVER) << BIT_SHIFT_IC_INTR_STAT_R_TX_OVER)
+
+#define BIT_IC_INTR_STAT_R_RX_FULL            	BIT(2)
+#define BIT_SHIFT_IC_INTR_STAT_R_RX_FULL      	2
+#define BIT_MASK_IC_INTR_STAT_R_RX_FULL       	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_RX_FULL(x)    	(((x) & BIT_MASK_IC_INTR_STAT_R_RX_FULL) << BIT_SHIFT_IC_INTR_STAT_R_RX_FULL)
+
+#define BIT_IC_INTR_STAT_R_RX_OVER            	BIT(1)
+#define BIT_SHIFT_IC_INTR_STAT_R_RX_OVER      	1
+#define BIT_MASK_IC_INTR_STAT_R_RX_OVER       	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_RX_OVER(x)    	(((x) & BIT_MASK_IC_INTR_STAT_R_RX_OVER) << BIT_SHIFT_IC_INTR_STAT_R_RX_OVER)
+
+#define BIT_IC_INTR_STAT_R_RX_UNDER           	BIT(0)
+#define BIT_SHIFT_IC_INTR_STAT_R_RX_UNDER     	0
+#define BIT_MASK_IC_INTR_STAT_R_RX_UNDER      	0x1
+#define BIT_CTRL_IC_INTR_STAT_R_RX_UNDER(x)   	(((x) & BIT_MASK_IC_INTR_STAT_R_RX_UNDER) << BIT_SHIFT_IC_INTR_STAT_R_RX_UNDER)
+
+
+//2 REG_DW_I2C_IC_INTR_MASK
+#define BIT_IC_INTR_MASK_M_GEN_CALL           	BIT(11)
+#define BIT_SHIFT_IC_INTR_MASK_M_GEN_CALL     	11
+#define BIT_MASK_IC_INTR_MASK_M_GEN_CALL      	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_GEN_CALL(x)   	(((x) & BIT_MASK_IC_INTR_MASK_M_GEN_CALL) << BIT_SHIFT_IC_INTR_MASK_M_GEN_CALL)
+
+#define BIT_IC_INTR_MASK_M_START_DET          	BIT(10)
+#define BIT_SHIFT_IC_INTR_MASK_M_START_DET    	10
+#define BIT_MASK_IC_INTR_MASK_M_START_DET     	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_START_DET(x)  	(((x) & BIT_MASK_IC_INTR_MASK_M_START_DET) << BIT_SHIFT_IC_INTR_MASK_M_START_DET)
+
+#define BIT_IC_INTR_MASK_M_STOP_DET           	BIT(9)
+#define BIT_SHIFT_IC_INTR_MASK_M_STOP_DET     	9
+#define BIT_MASK_IC_INTR_MASK_M_STOP_DET      	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_STOP_DET(x)   	(((x) & BIT_MASK_IC_INTR_MASK_M_STOP_DET) << BIT_SHIFT_IC_INTR_MASK_M_STOP_DET)
+
+#define BIT_IC_INTR_MASK_M_ACTIVITY           	BIT(8)
+#define BIT_SHIFT_IC_INTR_MASK_M_ACTIVITY     	8
+#define BIT_MASK_IC_INTR_MASK_M_ACTIVITY      	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_ACTIVITY(x)   	(((x) & BIT_MASK_IC_INTR_MASK_M_ACTIVITY) << BIT_SHIFT_IC_INTR_MASK_M_ACTIVITY)
+
+#define BIT_IC_INTR_MASK_M_RX_DONE            	BIT(7)
+#define BIT_SHIFT_IC_INTR_MASK_M_RX_DONE      	7
+#define BIT_MASK_IC_INTR_MASK_M_RX_DONE       	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_RX_DONE(x)    	(((x) & BIT_MASK_IC_INTR_MASK_M_RX_DONE) << BIT_SHIFT_IC_INTR_MASK_M_RX_DONE)
+
+#define BIT_IC_INTR_MASK_M_TX_ABRT            	BIT(6)
+#define BIT_SHIFT_IC_INTR_MASK_M_TX_ABRT      	6
+#define BIT_MASK_IC_INTR_MASK_M_TX_ABRT       	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_TX_ABRT(x)    	(((x) & BIT_MASK_IC_INTR_MASK_M_TX_ABRT) << BIT_SHIFT_IC_INTR_MASK_M_TX_ABRT)
+
+#define BIT_IC_INTR_MASK_M_RD_REQ             	BIT(5)
+#define BIT_SHIFT_IC_INTR_MASK_M_RD_REQ       	5
+#define BIT_MASK_IC_INTR_MASK_M_RD_REQ        	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_RD_REQ(x)     	(((x) & BIT_MASK_IC_INTR_MASK_M_RD_REQ) << BIT_SHIFT_IC_INTR_MASK_M_RD_REQ)
+
+#define BIT_IC_INTR_MASK_M_TX_EMPTY           	BIT(4)
+#define BIT_SHIFT_IC_INTR_MASK_M_TX_EMPTY     	4
+#define BIT_MASK_IC_INTR_MASK_M_TX_EMPTY      	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_TX_EMPTY(x)   	(((x) & BIT_MASK_IC_INTR_MASK_M_TX_EMPTY) << BIT_SHIFT_IC_INTR_MASK_M_TX_EMPTY)
+
+#define BIT_IC_INTR_MASK_M_TX_OVER            	BIT(3)
+#define BIT_SHIFT_IC_INTR_MASK_M_TX_OVER      	3
+#define BIT_MASK_IC_INTR_MASK_M_TX_OVER       	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_TX_OVER(x)    	(((x) & BIT_MASK_IC_INTR_MASK_M_TX_OVER) << BIT_SHIFT_IC_INTR_MASK_M_TX_OVER)
+
+#define BIT_IC_INTR_MASK_M_RX_FULL            	BIT(2)
+#define BIT_SHIFT_IC_INTR_MASK_M_RX_FULL      	2
+#define BIT_MASK_IC_INTR_MASK_M_RX_FULL       	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_RX_FULL(x)    	(((x) & BIT_MASK_IC_INTR_MASK_M_RX_FULL) << BIT_SHIFT_IC_INTR_MASK_M_RX_FULL)
+
+#define BIT_IC_INTR_MASK_M_RX_OVER            	BIT(1)
+#define BIT_SHIFT_IC_INTR_MASK_M_RX_OVER      	1
+#define BIT_MASK_IC_INTR_MASK_M_RX_OVER       	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_RX_OVER(x)    	(((x) & BIT_MASK_IC_INTR_MASK_M_RX_OVER) << BIT_SHIFT_IC_INTR_MASK_M_RX_OVER)
+
+#define BIT_IC_INTR_MASK_M_RX_UNDER           	BIT(0)
+#define BIT_SHIFT_IC_INTR_MASK_M_RX_UNDER     	0
+#define BIT_MASK_IC_INTR_MASK_M_RX_UNDER      	0x1
+#define BIT_CTRL_IC_INTR_MASK_M_RX_UNDER(x)   	(((x) & BIT_MASK_IC_INTR_MASK_M_RX_UNDER) << BIT_SHIFT_IC_INTR_MASK_M_RX_UNDER)
+
+
+//2 REG_DW_I2C_IC_RAW_INTR_STAT
+#define BIT_IC_RAW_INTR_STAT_GEN_CALL         	BIT(11)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_GEN_CALL   	11
+#define BIT_MASK_IC_RAW_INTR_STAT_GEN_CALL    	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_GEN_CALL(x) 	(((x) & BIT_MASK_IC_RAW_INTR_STAT_GEN_CALL) << BIT_SHIFT_IC_RAW_INTR_STAT_GEN_CALL)
+
+#define BIT_IC_RAW_INTR_STAT_START_DET        	BIT(10)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_START_DET  	10
+#define BIT_MASK_IC_RAW_INTR_STAT_START_DET   	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_START_DET(x)	(((x) & BIT_MASK_IC_RAW_INTR_STAT_START_DET) << BIT_SHIFT_IC_RAW_INTR_STAT_START_DET)
+
+#define BIT_IC_RAW_INTR_STAT_STOP_DET         	BIT(9)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_STOP_DET   	9
+#define BIT_MASK_IC_RAW_INTR_STAT_STOP_DET    	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_STOP_DET(x) 	(((x) & BIT_MASK_IC_RAW_INTR_STAT_STOP_DET) << BIT_SHIFT_IC_RAW_INTR_STAT_STOP_DET)
+
+#define BIT_IC_RAW_INTR_STAT_ACTIVITY         	BIT(8)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_ACTIVITY   	8
+#define BIT_MASK_IC_RAW_INTR_STAT_ACTIVITY    	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_ACTIVITY(x) 	(((x) & BIT_MASK_IC_RAW_INTR_STAT_ACTIVITY) << BIT_SHIFT_IC_RAW_INTR_STAT_ACTIVITY)
+
+#define BIT_IC_RAW_INTR_STAT_RX_DONE          	BIT(7)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_RX_DONE    	7
+#define BIT_MASK_IC_RAW_INTR_STAT_RX_DONE     	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_RX_DONE(x)  	(((x) & BIT_MASK_IC_RAW_INTR_STAT_RX_DONE) << BIT_SHIFT_IC_RAW_INTR_STAT_RX_DONE)
+
+#define BIT_IC_RAW_INTR_STAT_TX_ABRT          	BIT(6)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_TX_ABRT    	6
+#define BIT_MASK_IC_RAW_INTR_STAT_TX_ABRT     	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_TX_ABRT(x)  	(((x) & BIT_MASK_IC_RAW_INTR_STAT_TX_ABRT) << BIT_SHIFT_IC_RAW_INTR_STAT_TX_ABRT)
+
+#define BIT_IC_RAW_INTR_STAT_RD_REQ           	BIT(5)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_RD_REQ     	5
+#define BIT_MASK_IC_RAW_INTR_STAT_RD_REQ      	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_RD_REQ(x)   	(((x) & BIT_MASK_IC_RAW_INTR_STAT_RD_REQ) << BIT_SHIFT_IC_RAW_INTR_STAT_RD_REQ)
+
+#define BIT_IC_RAW_INTR_STAT_TX_EMPTY         	BIT(4)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_TX_EMPTY   	4
+#define BIT_MASK_IC_RAW_INTR_STAT_TX_EMPTY    	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_TX_EMPTY(x) 	(((x) & BIT_MASK_IC_RAW_INTR_STAT_TX_EMPTY) << BIT_SHIFT_IC_RAW_INTR_STAT_TX_EMPTY)
+
+#define BIT_IC_RAW_INTR_STAT_TX_OVER          	BIT(3)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_TX_OVER    	3
+#define BIT_MASK_IC_RAW_INTR_STAT_TX_OVER     	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_TX_OVER(x)  	(((x) & BIT_MASK_IC_RAW_INTR_STAT_TX_OVER) << BIT_SHIFT_IC_RAW_INTR_STAT_TX_OVER)
+
+#define BIT_IC_RAW_INTR_STAT_RX_FULL          	BIT(2)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_RX_FULL    	2
+#define BIT_MASK_IC_RAW_INTR_STAT_RX_FULL     	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_RX_FULL(x)  	(((x) & BIT_MASK_IC_RAW_INTR_STAT_RX_FULL) << BIT_SHIFT_IC_RAW_INTR_STAT_RX_FULL)
+
+#define BIT_IC_RAW_INTR_STAT_RX_OVER          	BIT(1)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_RX_OVER    	1
+#define BIT_MASK_IC_RAW_INTR_STAT_RX_OVER     	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_RX_OVER(x)  	(((x) & BIT_MASK_IC_RAW_INTR_STAT_RX_OVER) << BIT_SHIFT_IC_RAW_INTR_STAT_RX_OVER)
+
+#define BIT_IC_RAW_INTR_STAT_RX_UNDER         	BIT(0)
+#define BIT_SHIFT_IC_RAW_INTR_STAT_RX_UNDER   	0
+#define BIT_MASK_IC_RAW_INTR_STAT_RX_UNDER    	0x1
+#define BIT_CTRL_IC_RAW_INTR_STAT_RX_UNDER(x) 	(((x) & BIT_MASK_IC_RAW_INTR_STAT_RX_UNDER) << BIT_SHIFT_IC_RAW_INTR_STAT_RX_UNDER)
+
+
+//2 REG_DW_I2C_IC_RX_TL
+
+#define BIT_SHIFT_IC_RX_TL 0
+#define BIT_MASK_IC_RX_TL 0xff
+#define BIT_IC_RX_TL(x)                       	(((x) & BIT_MASK_IC_RX_TL) << BIT_SHIFT_IC_RX_TL)
+#define BIT_CTRL_IC_RX_TL(x)                  	(((x) & BIT_MASK_IC_RX_TL) << BIT_SHIFT_IC_RX_TL)
+#define BIT_GET_IC_RX_TL(x)                   	(((x) >> BIT_SHIFT_IC_RX_TL) & BIT_MASK_IC_RX_TL)
+
+
+//2 REG_DW_I2C_IC_TX_TL
+
+#define BIT_SHIFT_IC_TX_TL 0
+#define BIT_MASK_IC_TX_TL 0xff
+#define BIT_IC_TX_TL(x)                       	(((x) & BIT_MASK_IC_TX_TL) << BIT_SHIFT_IC_TX_TL)
+#define BIT_CTRL_IC_TX_TL(x)                  	(((x) & BIT_MASK_IC_TX_TL) << BIT_SHIFT_IC_TX_TL)
+#define BIT_GET_IC_TX_TL(x)                   	(((x) >> BIT_SHIFT_IC_TX_TL) & BIT_MASK_IC_TX_TL)
+
+
+//2 REG_DW_I2C_IC_CLR_INTR
+#define BIT_IC_CLR_INTR                       	BIT(0)
+#define BIT_SHIFT_IC_CLR_INTR                 	0
+#define BIT_MASK_IC_CLR_INTR                  	0x1
+#define BIT_CTRL_IC_CLR_INTR(x)               	(((x) & BIT_MASK_IC_CLR_INTR) << BIT_SHIFT_IC_CLR_INTR)
+
+
+//2 REG_DW_I2C_IC_CLR_RX_UNDER
+#define BIT_IC_CLR_RX_UNDER                   	BIT(0)
+#define BIT_SHIFT_IC_CLR_RX_UNDER             	0
+#define BIT_MASK_IC_CLR_RX_UNDER              	0x1
+#define BIT_CTRL_IC_CLR_RX_UNDER(x)           	(((x) & BIT_MASK_IC_CLR_RX_UNDER) << BIT_SHIFT_IC_CLR_RX_UNDER)
+
+
+//2 REG_DW_I2C_IC_CLR_RX_OVER
+#define BIT_IC_CLR_RX_OVER                    	BIT(0)
+#define BIT_SHIFT_IC_CLR_RX_OVER              	0
+#define BIT_MASK_IC_CLR_RX_OVER               	0x1
+#define BIT_CTRL_IC_CLR_RX_OVER(x)            	(((x) & BIT_MASK_IC_CLR_RX_OVER) << BIT_SHIFT_IC_CLR_RX_OVER)
+
+
+//2 REG_DW_I2C_IC_CLR_TX_OVER
+#define BIT_IC_CLR_TX_OVER                    	BIT(0)
+#define BIT_SHIFT_IC_CLR_TX_OVER              	0
+#define BIT_MASK_IC_CLR_TX_OVER               	0x1
+#define BIT_CTRL_IC_CLR_TX_OVER(x)            	(((x) & BIT_MASK_IC_CLR_TX_OVER) << BIT_SHIFT_IC_CLR_TX_OVER)
+
+
+//2 REG_DW_I2C_IC_CLR_RD_REQ
+#define BIT_IC_CLR_RD_REQ                     	BIT(0)
+#define BIT_SHIFT_IC_CLR_RD_REQ               	0
+#define BIT_MASK_IC_CLR_RD_REQ                	0x1
+#define BIT_CTRL_IC_CLR_RD_REQ(x)             	(((x) & BIT_MASK_IC_CLR_RD_REQ) << BIT_SHIFT_IC_CLR_RD_REQ)
+
+
+//2 REG_DW_I2C_IC_CLR_TX_ABRT
+#define BIT_CLR_RD_REQ                        	BIT(0)
+#define BIT_SHIFT_CLR_RD_REQ                  	0
+#define BIT_MASK_CLR_RD_REQ                   	0x1
+#define BIT_CTRL_CLR_RD_REQ(x)                	(((x) & BIT_MASK_CLR_RD_REQ) << BIT_SHIFT_CLR_RD_REQ)
+
+
+//2 REG_DW_I2C_IC_CLR_RX_DONE
+#define BIT_IC_CLR_RX_DONE                    	BIT(0)
+#define BIT_SHIFT_IC_CLR_RX_DONE              	0
+#define BIT_MASK_IC_CLR_RX_DONE               	0x1
+#define BIT_CTRL_IC_CLR_RX_DONE(x)            	(((x) & BIT_MASK_IC_CLR_RX_DONE) << BIT_SHIFT_IC_CLR_RX_DONE)
+
+
+//2 REG_DW_I2C_IC_CLR_ACTIVITY
+#define BIT_IC_CLR_ACTIVITY                   	BIT(0)
+#define BIT_SHIFT_IC_CLR_ACTIVITY             	0
+#define BIT_MASK_IC_CLR_ACTIVITY              	0x1
+#define BIT_CTRL_IC_CLR_ACTIVITY(x)           	(((x) & BIT_MASK_IC_CLR_ACTIVITY) << BIT_SHIFT_IC_CLR_ACTIVITY)
+
+
+//2 REG_DW_I2C_IC_CLR_STOP_DET
+#define BIT_IC_CLR_STOP_DET                   	BIT(0)
+#define BIT_SHIFT_IC_CLR_STOP_DET             	0
+#define BIT_MASK_IC_CLR_STOP_DET              	0x1
+#define BIT_CTRL_IC_CLR_STOP_DET(x)           	(((x) & BIT_MASK_IC_CLR_STOP_DET) << BIT_SHIFT_IC_CLR_STOP_DET)
+
+
+//2 REG_DW_I2C_IC_CLR_START_DET
+#define BIT_IC_CLR_START_DET                  	BIT(0)
+#define BIT_SHIFT_IC_CLR_START_DET            	0
+#define BIT_MASK_IC_CLR_START_DET             	0x1
+#define BIT_CTRL_IC_CLR_START_DET(x)          	(((x) & BIT_MASK_IC_CLR_START_DET) << BIT_SHIFT_IC_CLR_START_DET)
+
+
+//2 REG_DW_I2C_IC_CLR_GEN_CALL
+#define BIT_IC_CLR_GEN_CALL                   	BIT(0)
+#define BIT_SHIFT_IC_CLR_GEN_CALL             	0
+#define BIT_MASK_IC_CLR_GEN_CALL              	0x1
+#define BIT_CTRL_IC_CLR_GEN_CALL(x)           	(((x) & BIT_MASK_IC_CLR_GEN_CALL) << BIT_SHIFT_IC_CLR_GEN_CALL)
+
+
+//2 REG_DW_I2C_IC_ENABLE
+#define BIT_IC_ENABLE                         	BIT(0)
+#define BIT_SHIFT_IC_ENABLE                   	0
+#define BIT_MASK_IC_ENABLE                    	0x1
+#define BIT_CTRL_IC_ENABLE(x)                 	(((x) & BIT_MASK_IC_ENABLE) << BIT_SHIFT_IC_ENABLE)
+
+
+//2 REG_DW_I2C_IC_STATUS
+#define BIT_IC_STATUS_SLV_ACTIVITY            	BIT(6)
+#define BIT_SHIFT_IC_STATUS_SLV_ACTIVITY      	6
+#define BIT_MASK_IC_STATUS_SLV_ACTIVITY       	0x1
+#define BIT_CTRL_IC_STATUS_SLV_ACTIVITY(x)    	(((x) & BIT_MASK_IC_STATUS_SLV_ACTIVITY) << BIT_SHIFT_IC_STATUS_SLV_ACTIVITY)
+
+#define BIT_IC_STATUS_MST_ACTIVITY            	BIT(5)
+#define BIT_SHIFT_IC_STATUS_MST_ACTIVITY      	5
+#define BIT_MASK_IC_STATUS_MST_ACTIVITY       	0x1
+#define BIT_CTRL_IC_STATUS_MST_ACTIVITY(x)    	(((x) & BIT_MASK_IC_STATUS_MST_ACTIVITY) << BIT_SHIFT_IC_STATUS_MST_ACTIVITY)
+
+#define BIT_IC_STATUS_RFF                     	BIT(4)
+#define BIT_SHIFT_IC_STATUS_RFF               	4
+#define BIT_MASK_IC_STATUS_RFF                	0x1
+#define BIT_CTRL_IC_STATUS_RFF(x)             	(((x) & BIT_MASK_IC_STATUS_RFF) << BIT_SHIFT_IC_STATUS_RFF)
+
+#define BIT_IC_STATUS_RFNE                    	BIT(3)
+#define BIT_SHIFT_IC_STATUS_RFNE              	3
+#define BIT_MASK_IC_STATUS_RFNE               	0x1
+#define BIT_CTRL_IC_STATUS_RFNE(x)            	(((x) & BIT_MASK_IC_STATUS_RFNE) << BIT_SHIFT_IC_STATUS_RFNE)
+
+#define BIT_IC_STATUS_TFE                     	BIT(2)
+#define BIT_SHIFT_IC_STATUS_TFE               	2
+#define BIT_MASK_IC_STATUS_TFE                	0x1
+#define BIT_CTRL_IC_STATUS_TFE(x)             	(((x) & BIT_MASK_IC_STATUS_TFE) << BIT_SHIFT_IC_STATUS_TFE)
+
+#define BIT_IC_STATUS_TFNF                    	BIT(1)
+#define BIT_SHIFT_IC_STATUS_TFNF              	1
+#define BIT_MASK_IC_STATUS_TFNF               	0x1
+#define BIT_CTRL_IC_STATUS_TFNF(x)            	(((x) & BIT_MASK_IC_STATUS_TFNF) << BIT_SHIFT_IC_STATUS_TFNF)
+
+#define BIT_IC_STATUS_ACTIVITY                	BIT(0)
+#define BIT_SHIFT_IC_STATUS_ACTIVITY          	0
+#define BIT_MASK_IC_STATUS_ACTIVITY           	0x1
+#define BIT_CTRL_IC_STATUS_ACTIVITY(x)        	(((x) & BIT_MASK_IC_STATUS_ACTIVITY) << BIT_SHIFT_IC_STATUS_ACTIVITY)
+
+
+//2 REG_DW_I2C_IC_TXFLR
+
+#define BIT_SHIFT_IC_TXFLR 0
+#define BIT_MASK_IC_TXFLR 0x3f
+#define BIT_IC_TXFLR(x)                       	(((x) & BIT_MASK_IC_TXFLR) << BIT_SHIFT_IC_TXFLR)
+#define BIT_CTRL_IC_TXFLR(x)                  	(((x) & BIT_MASK_IC_TXFLR) << BIT_SHIFT_IC_TXFLR)
+#define BIT_GET_IC_TXFLR(x)                   	(((x) >> BIT_SHIFT_IC_TXFLR) & BIT_MASK_IC_TXFLR)
+
+
+//2 REG_DW_I2C_IC_RXFLR
+
+#define BIT_SHIFT_IC_RXFLR 0
+#define BIT_MASK_IC_RXFLR 0x1f
+#define BIT_IC_RXFLR(x)                       	(((x) & BIT_MASK_IC_RXFLR) << BIT_SHIFT_IC_RXFLR)
+#define BIT_CTRL_IC_RXFLR(x)                  	(((x) & BIT_MASK_IC_RXFLR) << BIT_SHIFT_IC_RXFLR)
+#define BIT_GET_IC_RXFLR(x)                   	(((x) >> BIT_SHIFT_IC_RXFLR) & BIT_MASK_IC_RXFLR)
+
+
+//2 REG_DW_I2C_IC_SDA_HOLD
+
+#define BIT_SHIFT_IC_SDA_HOLD 0
+#define BIT_MASK_IC_SDA_HOLD 0xffff
+#define BIT_IC_SDA_HOLD(x)                    	(((x) & BIT_MASK_IC_SDA_HOLD) << BIT_SHIFT_IC_SDA_HOLD)
+#define BIT_CTRL_IC_SDA_HOLD(x)               	(((x) & BIT_MASK_IC_SDA_HOLD) << BIT_SHIFT_IC_SDA_HOLD)
+#define BIT_GET_IC_SDA_HOLD(x)                	(((x) >> BIT_SHIFT_IC_SDA_HOLD) & BIT_MASK_IC_SDA_HOLD)
+
+
+//2 REG_DW_I2C_IC_TX_ABRT_SOURCE
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX 	BIT(15)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX	15
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST	BIT(14)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST	14
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO	BIT(13)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO	13
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO)
+
+#define BIT_IC_TX_ABRT_SOURCE_ARB_LOST        	BIT(12)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ARB_LOST  	12
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ARB_LOST   	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ARB_LOST(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ARB_LOST) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ARB_LOST)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS 	BIT(11)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS	11
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT	BIT(10)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT	10
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT	BIT(9)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT	9
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT 	BIT(8)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT	8
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET	BIT(7)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET	7
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET  	BIT(6)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET	6
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ 	BIT(5)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ	5
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK	BIT(4)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK	4
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK	BIT(3)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK	3
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK	BIT(2)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK	2
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK	BIT(1)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK	1
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK)
+
+#define BIT_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK	BIT(0)
+#define BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK	0
+#define BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK	0x1
+#define BIT_CTRL_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK(x)	(((x) & BIT_MASK_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK) << BIT_SHIFT_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK)
+
+
+//2 REG_DW_I2C_IC_SLV_DATA_NACK_ONLY
+#define BIT_IC_SLV_DATA_NACK_ONLY             	BIT(0)
+#define BIT_SHIFT_IC_SLV_DATA_NACK_ONLY       	0
+#define BIT_MASK_IC_SLV_DATA_NACK_ONLY        	0x1
+#define BIT_CTRL_IC_SLV_DATA_NACK_ONLY(x)     	(((x) & BIT_MASK_IC_SLV_DATA_NACK_ONLY) << BIT_SHIFT_IC_SLV_DATA_NACK_ONLY)
+
+
+//2 REG_DW_I2C_IC_DMA_CR
+#define BIT_IC_DMA_CR_TDMAE                   	BIT(1)
+#define BIT_SHIFT_IC_DMA_CR_TDMAE             	1
+#define BIT_MASK_IC_DMA_CR_TDMAE              	0x1
+#define BIT_CTRL_IC_DMA_CR_TDMAE(x)           	(((x) & BIT_MASK_IC_DMA_CR_TDMAE) << BIT_SHIFT_IC_DMA_CR_TDMAE)
+
+#define BIT_IC_DMA_CR_RDMAE                   	BIT(0)
+#define BIT_SHIFT_IC_DMA_CR_RDMAE             	0
+#define BIT_MASK_IC_DMA_CR_RDMAE              	0x1
+#define BIT_CTRL_IC_DMA_CR_RDMAE(x)           	(((x) & BIT_MASK_IC_DMA_CR_RDMAE) << BIT_SHIFT_IC_DMA_CR_RDMAE)
+
+
+//2 REG_DW_I2C_IC_DMA_TDLR
+
+#define BIT_SHIFT_IC_DMA_TDLR_DMATDL 0
+#define BIT_MASK_IC_DMA_TDLR_DMATDL 0x1f
+#define BIT_IC_DMA_TDLR_DMATDL(x)             	(((x) & BIT_MASK_IC_DMA_TDLR_DMATDL) << BIT_SHIFT_IC_DMA_TDLR_DMATDL)
+#define BIT_CTRL_IC_DMA_TDLR_DMATDL(x)        	(((x) & BIT_MASK_IC_DMA_TDLR_DMATDL) << BIT_SHIFT_IC_DMA_TDLR_DMATDL)
+#define BIT_GET_IC_DMA_TDLR_DMATDL(x)         	(((x) >> BIT_SHIFT_IC_DMA_TDLR_DMATDL) & BIT_MASK_IC_DMA_TDLR_DMATDL)
+
+
+//2 REG_DW_I2C_IC_DMA_RDLR
+
+#define BIT_SHIFT_IC_DMA_RDLR_DMARDL 0
+#define BIT_MASK_IC_DMA_RDLR_DMARDL 0xf
+#define BIT_IC_DMA_RDLR_DMARDL(x)             	(((x) & BIT_MASK_IC_DMA_RDLR_DMARDL) << BIT_SHIFT_IC_DMA_RDLR_DMARDL)
+#define BIT_CTRL_IC_DMA_RDLR_DMARDL(x)        	(((x) & BIT_MASK_IC_DMA_RDLR_DMARDL) << BIT_SHIFT_IC_DMA_RDLR_DMARDL)
+#define BIT_GET_IC_DMA_RDLR_DMARDL(x)         	(((x) >> BIT_SHIFT_IC_DMA_RDLR_DMARDL) & BIT_MASK_IC_DMA_RDLR_DMARDL)
+
+
+//2 REG_DW_I2C_IC_SDA_SETUP
+
+#define BIT_SHIFT_IC_SDA_SETUP 0
+#define BIT_MASK_IC_SDA_SETUP 0xff
+#define BIT_IC_SDA_SETUP(x)                   	(((x) & BIT_MASK_IC_SDA_SETUP) << BIT_SHIFT_IC_SDA_SETUP)
+#define BIT_CTRL_IC_SDA_SETUP(x)              	(((x) & BIT_MASK_IC_SDA_SETUP) << BIT_SHIFT_IC_SDA_SETUP)
+#define BIT_GET_IC_SDA_SETUP(x)               	(((x) >> BIT_SHIFT_IC_SDA_SETUP) & BIT_MASK_IC_SDA_SETUP)
+
+
+//2 REG_DW_I2C_IC_ACK_GENERAL_CALL
+#define BIT_IC_ACK_GENERAL_CALL               	BIT(0)
+#define BIT_SHIFT_IC_ACK_GENERAL_CALL         	0
+#define BIT_MASK_IC_ACK_GENERAL_CALL          	0x1
+#define BIT_CTRL_IC_ACK_GENERAL_CALL(x)       	(((x) & BIT_MASK_IC_ACK_GENERAL_CALL) << BIT_SHIFT_IC_ACK_GENERAL_CALL)
+
+
+//2 REG_DW_I2C_IC_ENABLE_STATUS
+#define BIT_IC_ENABLE_STATUS_SLV_RX_DATA_LOST 	BIT(2)
+#define BIT_SHIFT_IC_ENABLE_STATUS_SLV_RX_DATA_LOST	2
+#define BIT_MASK_IC_ENABLE_STATUS_SLV_RX_DATA_LOST	0x1
+#define BIT_CTRL_IC_ENABLE_STATUS_SLV_RX_DATA_LOST(x)	(((x) & BIT_MASK_IC_ENABLE_STATUS_SLV_RX_DATA_LOST) << BIT_SHIFT_IC_ENABLE_STATUS_SLV_RX_DATA_LOST)
+
+#define BIT_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY	BIT(1)
+#define BIT_SHIFT_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY	1
+#define BIT_MASK_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY	0x1
+#define BIT_CTRL_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY(x)	(((x) & BIT_MASK_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY) << BIT_SHIFT_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY)
+
+#define BIT_IC_ENABLE_STATUS_IC_EN            	BIT(0)
+#define BIT_SHIFT_IC_ENABLE_STATUS_IC_EN      	0
+#define BIT_MASK_IC_ENABLE_STATUS_IC_EN       	0x1
+#define BIT_CTRL_IC_ENABLE_STATUS_IC_EN(x)    	(((x) & BIT_MASK_IC_ENABLE_STATUS_IC_EN) << BIT_SHIFT_IC_ENABLE_STATUS_IC_EN)
+
+
+//2 REG_DW_I2C_IC_COMP_PARAM_1
+
+#define BIT_SHIFT_IC_COMP_PARAM_1_TX_BUFFER_DEPTH 16
+#define BIT_MASK_IC_COMP_PARAM_1_TX_BUFFER_DEPTH 0xff
+#define BIT_IC_COMP_PARAM_1_TX_BUFFER_DEPTH(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_TX_BUFFER_DEPTH) << BIT_SHIFT_IC_COMP_PARAM_1_TX_BUFFER_DEPTH)
+#define BIT_CTRL_IC_COMP_PARAM_1_TX_BUFFER_DEPTH(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_TX_BUFFER_DEPTH) << BIT_SHIFT_IC_COMP_PARAM_1_TX_BUFFER_DEPTH)
+#define BIT_GET_IC_COMP_PARAM_1_TX_BUFFER_DEPTH(x)	(((x) >> BIT_SHIFT_IC_COMP_PARAM_1_TX_BUFFER_DEPTH) & BIT_MASK_IC_COMP_PARAM_1_TX_BUFFER_DEPTH)
+
+
+#define BIT_SHIFT_IC_COMP_PARAM_1_RX_BUFFER_DEPTH 8
+#define BIT_MASK_IC_COMP_PARAM_1_RX_BUFFER_DEPTH 0xff
+#define BIT_IC_COMP_PARAM_1_RX_BUFFER_DEPTH(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_RX_BUFFER_DEPTH) << BIT_SHIFT_IC_COMP_PARAM_1_RX_BUFFER_DEPTH)
+#define BIT_CTRL_IC_COMP_PARAM_1_RX_BUFFER_DEPTH(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_RX_BUFFER_DEPTH) << BIT_SHIFT_IC_COMP_PARAM_1_RX_BUFFER_DEPTH)
+#define BIT_GET_IC_COMP_PARAM_1_RX_BUFFER_DEPTH(x)	(((x) >> BIT_SHIFT_IC_COMP_PARAM_1_RX_BUFFER_DEPTH) & BIT_MASK_IC_COMP_PARAM_1_RX_BUFFER_DEPTH)
+
+#define BIT_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS	BIT(7)
+#define BIT_SHIFT_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS	7
+#define BIT_MASK_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS	0x1
+#define BIT_CTRL_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS) << BIT_SHIFT_IC_COMP_PARAM_1_ADD_ENCODED_PARAMS)
+
+#define BIT_IC_COMP_PARAM_1_HAS_DMA           	BIT(6)
+#define BIT_SHIFT_IC_COMP_PARAM_1_HAS_DMA     	6
+#define BIT_MASK_IC_COMP_PARAM_1_HAS_DMA      	0x1
+#define BIT_CTRL_IC_COMP_PARAM_1_HAS_DMA(x)   	(((x) & BIT_MASK_IC_COMP_PARAM_1_HAS_DMA) << BIT_SHIFT_IC_COMP_PARAM_1_HAS_DMA)
+
+#define BIT_IC_COMP_PARAM_1_INTR_IO           	BIT(5)
+#define BIT_SHIFT_IC_COMP_PARAM_1_INTR_IO     	5
+#define BIT_MASK_IC_COMP_PARAM_1_INTR_IO      	0x1
+#define BIT_CTRL_IC_COMP_PARAM_1_INTR_IO(x)   	(((x) & BIT_MASK_IC_COMP_PARAM_1_INTR_IO) << BIT_SHIFT_IC_COMP_PARAM_1_INTR_IO)
+
+#define BIT_IC_COMP_PARAM_1_HC_COUNT_VALUES   	BIT(4)
+#define BIT_SHIFT_IC_COMP_PARAM_1_HC_COUNT_VALUES	4
+#define BIT_MASK_IC_COMP_PARAM_1_HC_COUNT_VALUES	0x1
+#define BIT_CTRL_IC_COMP_PARAM_1_HC_COUNT_VALUES(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_HC_COUNT_VALUES) << BIT_SHIFT_IC_COMP_PARAM_1_HC_COUNT_VALUES)
+
+
+#define BIT_SHIFT_IC_COMP_PARAM_1_MAX_SPEED_MODE 2
+#define BIT_MASK_IC_COMP_PARAM_1_MAX_SPEED_MODE 0x3
+#define BIT_IC_COMP_PARAM_1_MAX_SPEED_MODE(x) 	(((x) & BIT_MASK_IC_COMP_PARAM_1_MAX_SPEED_MODE) << BIT_SHIFT_IC_COMP_PARAM_1_MAX_SPEED_MODE)
+#define BIT_CTRL_IC_COMP_PARAM_1_MAX_SPEED_MODE(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_MAX_SPEED_MODE) << BIT_SHIFT_IC_COMP_PARAM_1_MAX_SPEED_MODE)
+#define BIT_GET_IC_COMP_PARAM_1_MAX_SPEED_MODE(x)	(((x) >> BIT_SHIFT_IC_COMP_PARAM_1_MAX_SPEED_MODE) & BIT_MASK_IC_COMP_PARAM_1_MAX_SPEED_MODE)
+
+
+#define BIT_SHIFT_IC_COMP_PARAM_1_APB_DATA_WIDTH 0
+#define BIT_MASK_IC_COMP_PARAM_1_APB_DATA_WIDTH 0x3
+#define BIT_IC_COMP_PARAM_1_APB_DATA_WIDTH(x) 	(((x) & BIT_MASK_IC_COMP_PARAM_1_APB_DATA_WIDTH) << BIT_SHIFT_IC_COMP_PARAM_1_APB_DATA_WIDTH)
+#define BIT_CTRL_IC_COMP_PARAM_1_APB_DATA_WIDTH(x)	(((x) & BIT_MASK_IC_COMP_PARAM_1_APB_DATA_WIDTH) << BIT_SHIFT_IC_COMP_PARAM_1_APB_DATA_WIDTH)
+#define BIT_GET_IC_COMP_PARAM_1_APB_DATA_WIDTH(x)	(((x) >> BIT_SHIFT_IC_COMP_PARAM_1_APB_DATA_WIDTH) & BIT_MASK_IC_COMP_PARAM_1_APB_DATA_WIDTH)
+
+
+//2 REG_DW_I2C_IC_COMP_VERSION
+
+#define BIT_SHIFT_IC_COMP_VERSION 0
+#define BIT_MASK_IC_COMP_VERSION 0xffffffffL
+#define BIT_IC_COMP_VERSION(x)                	(((x) & BIT_MASK_IC_COMP_VERSION) << BIT_SHIFT_IC_COMP_VERSION)
+#define BIT_CTRL_IC_COMP_VERSION(x)           	(((x) & BIT_MASK_IC_COMP_VERSION) << BIT_SHIFT_IC_COMP_VERSION)
+#define BIT_GET_IC_COMP_VERSION(x)            	(((x) >> BIT_SHIFT_IC_COMP_VERSION) & BIT_MASK_IC_COMP_VERSION)
+
+
+//2 REG_DW_I2C_IC_COMP_TYPE
+
+#define BIT_SHIFT_IC_COMP_TYPE 0
+#define BIT_MASK_IC_COMP_TYPE 0xffffffffL
+#define BIT_IC_COMP_TYPE(x)                   	(((x) & BIT_MASK_IC_COMP_TYPE) << BIT_SHIFT_IC_COMP_TYPE)
+#define BIT_CTRL_IC_COMP_TYPE(x)              	(((x) & BIT_MASK_IC_COMP_TYPE) << BIT_SHIFT_IC_COMP_TYPE)
+#define BIT_GET_IC_COMP_TYPE(x)               	(((x) >> BIT_SHIFT_IC_COMP_TYPE) & BIT_MASK_IC_COMP_TYPE)
+
+//======================== Register Address Definition ========================
+#define REG_DW_I2C_IC_CON 0x0000
+#define REG_DW_I2C_IC_TAR 0x0004
+#define REG_DW_I2C_IC_SAR 0x0008
+#define REG_DW_I2C_IC_HS_MADDR 0x000C
+#define REG_DW_I2C_IC_DATA_CMD 0x0010
+#define REG_DW_I2C_IC_SS_SCL_HCNT 0x0014
+#define REG_DW_I2C_IC_SS_SCL_LCNT 0x0018
+#define REG_DW_I2C_IC_FS_SCL_HCNT 0x001C
+#define REG_DW_I2C_IC_FS_SCL_LCNT 0x0020
+#define REG_DW_I2C_IC_HS_SCL_HCNT 0x0024
+#define REG_DW_I2C_IC_HS_SCL_LCNT 0x0028
+#define REG_DW_I2C_IC_INTR_STAT 0x002C
+#define REG_DW_I2C_IC_INTR_MASK 0x0030
+#define REG_DW_I2C_IC_RAW_INTR_STAT 0x0034
+#define REG_DW_I2C_IC_RX_TL 0x0038
+#define REG_DW_I2C_IC_TX_TL 0x003C
+#define REG_DW_I2C_IC_CLR_INTR 0x0040
+#define REG_DW_I2C_IC_CLR_RX_UNDER 0x0044
+#define REG_DW_I2C_IC_CLR_RX_OVER 0x0048
+#define REG_DW_I2C_IC_CLR_TX_OVER 0x004C
+#define REG_DW_I2C_IC_CLR_RD_REQ 0x0050
+#define REG_DW_I2C_IC_CLR_TX_ABRT 0x0054
+#define REG_DW_I2C_IC_CLR_RX_DONE 0x0058
+#define REG_DW_I2C_IC_CLR_ACTIVITY 0x005C
+#define REG_DW_I2C_IC_CLR_STOP_DET 0x0060
+#define REG_DW_I2C_IC_CLR_START_DET 0x0064
+#define REG_DW_I2C_IC_CLR_GEN_CALL 0x0068
+#define REG_DW_I2C_IC_ENABLE 0x006C
+#define REG_DW_I2C_IC_STATUS 0x0070
+#define REG_DW_I2C_IC_TXFLR 0x0074
+#define REG_DW_I2C_IC_RXFLR 0x0078
+#define REG_DW_I2C_IC_SDA_HOLD 0x007C
+#define REG_DW_I2C_IC_TX_ABRT_SOURCE 0x0080
+#define REG_DW_I2C_IC_SLV_DATA_NACK_ONLY 0x0084
+#define REG_DW_I2C_IC_DMA_CR 0x0088
+#define REG_DW_I2C_IC_DMA_TDLR 0x008C
+#define REG_DW_I2C_IC_DMA_RDLR 0x0090
+#define REG_DW_I2C_IC_SDA_SETUP 0x0094
+#define REG_DW_I2C_IC_ACK_GENERAL_CALL 0x0098
+#define REG_DW_I2C_IC_ENABLE_STATUS 0x009C
+#define REG_DW_I2C_IC_COMP_PARAM_1 0x00F4
+#define REG_DW_I2C_IC_COMP_VERSION 0x00F8
+#define REG_DW_I2C_IC_COMP_TYPE 0x00FC
+
+//======================================================
+// I2C related enumeration
+// I2C Address Mode
+typedef enum _I2C_ADDR_MODE_   {
+    I2C_ADDR_7BIT   =   0,
+    I2C_ADDR_10BIT  =   1,  
+}I2C_ADDR_MODE,*PI2C_ADDR_MODE;
+
+// I2C Speed Mode
+typedef enum _I2C_SPD_MODE_   {
+    I2C_SS_MODE     =   1,
+    I2C_FS_MODE     =   2,
+    I2C_HS_MODE     =   3,
+}I2C_SPD_MODE,*PI2C_SPD_MODE;
+
+//I2C Timing Parameters
+#define I2C_SS_MIN_SCL_HTIME    4000    //the unit is ns.
+#define I2C_SS_MIN_SCL_LTIME    4700    //the unit is ns.
+
+#define I2C_FS_MIN_SCL_HTIME    600     //the unit is ns.
+#define I2C_FS_MIN_SCL_LTIME    1300    //the unit is ns.
+
+#define I2C_HS_MIN_SCL_HTIME_100    60      //the unit is ns, with bus loading = 100pf
+#define I2C_HS_MIN_SCL_LTIME_100    120     //the unit is ns., with bus loading = 100pf
+
+#define I2C_HS_MIN_SCL_HTIME_400    160     //the unit is ns, with bus loading = 400pf
+#define I2C_HS_MIN_SCL_LTIME_400    320     //the unit is ns., with bus loading = 400pf
+
+
+//======================================================
+//I2C Essential functions and macros
+_LONG_CALL_ROM_ VOID HalI2CWrite32(IN u8 I2CIdx, IN u8 I2CReg, IN u32 I2CVal);
+_LONG_CALL_ROM_ u32 HalI2CRead32(IN u8 I2CIdx, IN u8 I2CReg);
+
+#define HAL_I2C_WRITE32(I2CIdx, addr, value)    HalI2CWrite32(I2CIdx,addr,value)
+#define HAL_I2C_READ32(I2CIdx, addr)            HalI2CRead32(I2CIdx,addr)
+
+// Rtl8195a I2C function prototypes
+_LONG_CALL_ HAL_Status HalI2CEnableRtl8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CInit8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CDeInit8195a(IN VOID *Data);
+_LONG_CALL_ROM_ HAL_Status HalI2CSetCLKRtl8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CMassSendRtl8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CSendRtl8195a(IN VOID *Data);
+_LONG_CALL_ u8 HalI2CReceiveRtl8195a(IN VOID *Data);
+_LONG_CALL_ROM_ HAL_Status HalI2CIntrCtrl8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CClrIntrRtl8195a(IN VOID *Data);
+_LONG_CALL_ROM_ HAL_Status HalI2CClrAllIntrRtl8195a(IN VOID *Data);
+_LONG_CALL_ HAL_Status HalI2CDMACtrl8195a(IN VOID *Data);
+_LONG_CALL_ u32 HalI2CReadRegRtl8195a(IN VOID *Data, IN u8 I2CReg);
+_LONG_CALL_ HAL_Status HalI2CWriteRegRtl8195a(IN VOID *Data, IN u8 I2CReg, IN u32 RegVal);
+
+//Rtl8195a I2C V02 function prototype
+_LONG_CALL_ HAL_Status HalI2CSendRtl8195aV02(IN  VOID *Data);
+#if  defined(CONFIG_CHIP_A_CUT) || defined(CONFIG_CHIP_B_CUT) || defined(CONFIG_CHIP_C_CUT)
+_LONG_CALL_ HAL_Status HalI2CSetCLKRtl8195aV02(IN  VOID *Data);
+#elif defined(CONFIG_CHIP_E_CUT)
+_LONG_CALL_ROM_ HAL_Status HalI2CSetCLKRtl8195aV02(IN  VOID *Data);
+#endif
+//Rtl8195a I2C V02 function prototype  END
+
+HAL_Status HalI2CInit8195a_Patch(IN VOID *Data);
+HAL_Status HalI2CSendRtl8195a_Patch(IN VOID *Data);
+HAL_Status HalI2CSetCLKRtl8195a_Patch(IN VOID *Data);
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_i2s.h

@@ -0,0 +1,617 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_I2S_H_
+#define _RTL8195A_I2S_H_
+
+
+//=============== Register Bit Field Definition ====================
+// REG_I2S_CONTROL
+#define BIT_CTLX_I2S_EN                         BIT(0)
+#define BIT_SHIFT_CTLX_I2S_EN                   0
+#define BIT_MASK_CTLX_I2S_EN                    0x1
+#define BIT_CTRL_CTLX_I2S_EN(x)                 (((x) & BIT_MASK_CTLX_I2S_EN) << BIT_SHIFT_CTLX_I2S_EN)
+
+#define BIT_SHIFT_CTLX_I2S_TRX_ACT              1
+#define BIT_MASK_CTLX_I2S_TRX_ACT               0x3
+#define BIT_CTRL_CTLX_I2S_TRX_ACT(x)            (((x) & BIT_MASK_CTLX_I2S_TRX_ACT) << BIT_SHIFT_CTLX_I2S_TRX_ACT)
+#define BIT_GET_CTLX_I2S_TRX_ACT(x)             (((x) >> BIT_SHIFT_CTLX_I2S_TRX_ACT) & BIT_MASK_CTLX_I2S_TRX_ACT)
+
+#define BIT_SHIFT_CTLX_I2S_CH_NUM               3
+#define BIT_MASK_CTLX_I2S_CH_NUM                0x3
+#define BIT_CTRL_CTLX_I2S_CH_NUM(x)             (((x) & BIT_MASK_CTLX_I2S_CH_NUM) << BIT_SHIFT_CTLX_I2S_CH_NUM)
+#define BIT_GET_CTLX_I2S_CH_NUM(x)              (((x) >> BIT_SHIFT_CTLX_I2S_CH_NUM) & BIT_MASK_CTLX_I2S_CH_NUM)
+
+#define BIT_CTLX_I2S_WL                         BIT(6)
+#define BIT_SHIFT_CTLX_I2S_WL                   6
+#define BIT_MASK_CTLX_I2S_WL                    0x1
+#define BIT_CTRL_CTLX_I2S_WL(x)                 (((x) & BIT_MASK_CTLX_I2S_WL) << BIT_SHIFT_CTLX_I2S_WL)
+
+#define BIT_CTLX_I2S_LRSWAP                     BIT(10)
+#define BIT_SHIFT_CTLX_I2S_LRSWAP               10
+#define BIT_MASK_CTLX_I2S_LRSWAP                0x1
+#define BIT_CTRL_CTLX_I2S_LRSWAP(x)             (((x) & BIT_MASK_CTLX_I2S_LRSWAP) << BIT_SHIFT_CTLX_I2S_LRSWAP)
+
+#define BIT_CTLX_I2S_SCK_INV                    BIT(11)
+#define BIT_SHIFT_CTLX_I2S_SCK_INV              11
+#define BIT_MASK_CTLX_I2S_SCK_INV               0x1
+#define BIT_CTRL_CTLX_I2S_SCK_INV(x)            (((x) & BIT_MASK_CTLX_I2S_SCK_INV) << BIT_SHIFT_CTLX_I2S_SCK_INV)
+
+#define BIT_CTLX_I2S_ENDIAN_SWAP                BIT(12)
+#define BIT_SHIFT_CTLX_I2S_ENDIAN_SWAP          12
+#define BIT_MASK_CTLX_I2S_ENDIAN_SWAP           0x1
+#define BIT_CTRL_CTLX_I2S_ENDIAN_SWAP(x)        (((x) & BIT_MASK_CTLX_I2S_ENDIAN_SWAP) << BIT_SHIFT_CTLX_I2S_ENDIAN_SWAP)
+
+#define BIT_CTLX_I2S_SLAVE_MODE                 BIT(29)
+#define BIT_SHIFT_CTLX_I2S_SLAVE_MODE           29
+#define BIT_MASK_CTLX_I2S_SLAVE_MODE            0x1
+#define BIT_CTRL_CTLX_I2S_SLAVE_MODE(x)         (((x) & BIT_MASK_CTLX_I2S_SLAVE_MODE) << BIT_SHIFT_CTLX_I2S_SLAVE_MODE)
+
+#define BIT_CTLX_I2S_CLK_SRC                    BIT(30)
+#define BIT_SHIFT_CTLX_I2S_CLK_SRC              30
+#define BIT_MASK_CTLX_I2S_CLK_SRC               0x1
+#define BIT_CTRL_CTLX_I2S_CLK_SRC(x)            (((x) & BIT_MASK_CTLX_I2S_CLK_SRC) << BIT_SHIFT_CTLX_I2S_CLK_SRC)
+
+#define BIT_CTLX_I2S_SW_RSTN                    BIT(31)
+#define BIT_SHIFT_CTLX_I2S_SW_RSTN              31
+#define BIT_MASK_CTLX_I2S_SW_RSTN               0x1
+#define BIT_CTRL_CTLX_I2S_SW_RSTN(x)            (((x) & BIT_MASK_CTLX_I2S_SW_RSTN) << BIT_SHIFT_CTLX_I2S_SW_RSTN)
+
+// REG_I2S_SETTING
+#define BIT_SHIFT_SETTING_I2S_PAGE_SZ           0
+#define BIT_MASK_SETTING_I2S_PAGE_SZ            0xFFF
+#define BIT_CTRL_SETTING_I2S_PAGE_SZ(x)         (((x) & BIT_MASK_SETTING_I2S_PAGE_SZ) << BIT_SHIFT_SETTING_I2S_PAGE_SZ)
+#define BIT_GET_SETTING_I2S_PAGE_SZ(x)          (((x) >> BIT_SHIFT_SETTING_I2S_PAGE_SZ) & BIT_MASK_SETTING_I2S_PAGE_SZ)
+
+#define BIT_SHIFT_SETTING_I2S_PAGE_NUM          12
+#define BIT_MASK_SETTING_I2S_PAGE_NUM           0x3
+#define BIT_CTRL_SETTING_I2S_PAGE_NUM(x)        (((x) & BIT_MASK_SETTING_I2S_PAGE_NUM) << BIT_SHIFT_SETTING_I2S_PAGE_NUM)
+#define BIT_GET_SETTING_I2S_PAGE_NUM(x)         (((x) >> BIT_SHIFT_SETTING_I2S_PAGE_NUM) & BIT_MASK_SETTING_I2S_PAGE_NUM)
+
+#define BIT_SHIFT_SETTING_I2S_SAMPLE_RATE       14
+#define BIT_MASK_SETTING_I2S_SAMPLE_RATE        0x7
+#define BIT_CTRL_SETTING_I2S_SAMPLE_RATE(x)     (((x) & BIT_MASK_SETTING_I2S_SAMPLE_RATE) << BIT_SHIFT_SETTING_I2S_SAMPLE_RATE)
+#define BIT_GET_SETTING_I2S_SAMPLE_RATE(x)      (((x) >> BIT_SHIFT_SETTING_I2S_SAMPLE_RATE) & BIT_MASK_SETTING_I2S_SAMPLE_RATE)
+
+// i2s trx page own bit
+#define BIT_PAGE_I2S_OWN_BIT                    BIT(31)
+#define BIT_SHIFT_PAGE_I2S_OWN_BIT              31
+#define BIT_MASK_PAGE_I2S_OWN_BIT               0x1
+#define BIT_CTRL_PAGE_I2S_OWN_BIT(x)            (((x) & BIT_MASK_PAGE_I2S_OWN_BIT) << BIT_SHIFT_PAGE_I2S_OWN_BIT)
+
+//=============== Register Address Definition ====================
+#define REG_I2S_PAGE_OWN_OFF   0x004
+
+#define REG_I2S_CTL            0x000
+#define REG_I2S_TX_PAGE_PTR    0x004
+#define REG_I2S_RX_PAGE_PTR    0x008
+#define REG_I2S_SETTING        0x00C
+
+#define REG_I2S_TX_MASK_INT    0x010
+#define REG_I2S_TX_STATUS_INT  0x014
+#define REG_I2S_RX_MASK_INT    0x018
+#define REG_I2S_RX_STATUS_INT  0x01c
+
+
+#define REG_I2S_TX_PAGE0_OWN   0x020
+#define REG_I2S_TX_PAGE1_OWN   0x024
+#define REG_I2S_TX_PAGE2_OWN   0x028
+#define REG_I2S_TX_PAGE3_OWN   0x02C
+#define REG_I2S_RX_PAGE0_OWN   0x030
+#define REG_I2S_RX_PAGE1_OWN   0x034
+#define REG_I2S_RX_PAGE2_OWN   0x038
+#define REG_I2S_RX_PAGE3_OWN   0x03C
+
+/*I2S Essential Functions and Macros*/
+VOID
+HalI2SWrite32(
+    IN  u8      I2SIdx,
+    IN  u8      I2SReg,
+    IN  u32     I2SVal
+);
+
+u32
+HalI2SRead32(
+    IN  u8      I2SIdx,
+    IN  u8      I2SReg
+);
+
+/*
+#define HAL_I2SX_READ32(I2sIndex, addr)     \
+                HAL_READ32(I2S0_REG_BASE+ (I2sIndex*I2S1_REG_OFF), addr)
+#define HAL_I2SX_WRITE32(I2sIndex, addr, value)     \
+                HAL_WRITE32((I2S0_REG_BASE+ (I2sIndex*I2S1_REG_OFF)), addr, value)
+*/
+
+#define HAL_I2S_WRITE32(I2SIdx, addr, value)    HalI2SWrite32(I2SIdx,addr,value)
+#define HAL_I2S_READ32(I2SIdx, addr)            HalI2SRead32(I2SIdx,addr)
+
+/* I2S debug output*/
+#define I2S_PREFIX      "RTL8195A[i2s]: "
+#define I2S_PREFIX_LVL  "    [i2s_DBG]: "
+
+typedef enum _I2S_DBG_LVL_ {
+    HAL_I2S_LVL         =   0x01,
+    SAL_I2S_LVL         =   0x02,
+    VERI_I2S_LVL        =   0x03,
+}I2S_DBG_LVL,*PI2S_DBG_LVL;
+
+#ifdef CONFIG_DEBUG_LOG
+#ifdef CONFIG_DEBUG_LOG_I2S_HAL
+
+    #define DBG_8195A_I2S(...)  do{ \
+        _DbgDump("\r"I2S_PREFIX __VA_ARGS__);\
+    }while(0)
+
+
+    #define I2SDBGLVL   0xFF   
+    #define DBG_8195A_I2S_LVL(LVL,...)  do{\
+            if (LVL&I2SDBGLVL){\
+                _DbgDump("\r"I2S_PREFIX_LVL __VA_ARGS__);\
+            }\
+    }while(0)
+#else
+    #define DBG_I2S_LOG_PERD    100
+    #define DBG_8195A_I2S(...)
+    #define DBG_8195A_I2S_LVL(...)
+#endif
+#else
+    #define DBG_I2S_LOG_PERD    100
+    #define DBG_8195A_I2S(...)
+    #define DBG_8195A_I2S_LVL(...)
+#endif
+
+/*
+#define REG_I2S_PAGE_OWN_OFF   0x004
+#define REG_I2S_CTL            0x000
+#define REG_I2S_TX_PAGE_PTR    0x004
+#define REG_I2S_RX_PAGE_PTR    0x008
+#define REG_I2S_SETTING        0x00C
+
+#define REG_I2S_TX_MASK_INT    0x010
+#define REG_I2S_TX_STATUS_INT  0x014
+#define REG_I2S_RX_MASK_INT    0x018
+#define REG_I2S_RX_STATUS_INT  0x01c
+
+
+
+#define REG_I2S_TX_PAGE0_OWN   0x020
+#define REG_I2S_TX_PAGE1_OWN   0x024
+#define REG_I2S_TX_PAGE2_OWN   0x028
+#define REG_I2S_TX_PAGE3_OWN   0x02C
+#define REG_I2S_RX_PAGE0_OWN   0x030
+#define REG_I2S_RX_PAGE1_OWN   0x034
+#define REG_I2S_RX_PAGE2_OWN   0x038
+#define REG_I2S_RX_PAGE3_OWN   0x03C
+*/
+/* template 
+#define BIT_SHIFT_CTLX_ 7
+#define BIT_MASK_CTLX_  0x1
+#define BIT_CTLX_(x) (((x) & BIT_MASK_CTLX_) << BIT_SHIFT_CTLX_)
+#define BIT_INV_CTLX_ (~(BIT_MASK_CTLX_ << BIT_SHIFT_CTLX_))
+*//*
+#define BIT_SHIFT_CTLX_IIS_EN 0
+#define BIT_MASK_CTLX_IIS_EN  0x1
+#define BIT_CTLX_IIS_EN(x) (((x) & BIT_MASK_CTLX_IIS_EN) << BIT_SHIFT_CTLX_IIS_EN)
+#define BIT_INV_CTLX_IIS_EN (~(BIT_MASK_CTLX_IIS_EN << BIT_SHIFT_CTLX_IIS_EN))
+
+#define BIT_SHIFT_CTLX_TRX 1
+#define BIT_MASK_CTLX_TRX 0x3
+#define BIT_CTLX_TRX(x) (((x) & BIT_MASK_CTLX_TRX) << BIT_SHIFT_CTLX_TRX)
+#define BIT_INV_CTLX_TRX (~(BIT_MASK_CTLX_TRX << BIT_SHIFT_CTLX_TRX))
+
+#define BIT_SHIFT_CTLX_CH_NUM 3
+#define BIT_MASK_CTLX_CH_NUM  0x3
+#define BIT_CTLX_CH_NUM(x) (((x) & BIT_MASK_CTLX_CH_NUM) << BIT_SHIFT_CTLX_CH_NUM)
+#define BIT_INV_CTLX_CH_NUM (~(BIT_MASK_CTLX_CH_NUM << BIT_SHIFT_CTLX_CH_NUM))
+
+#define BIT_SHIFT_CTLX_EDGE_SW 5
+#define BIT_MASK_CTLX_EDGE_SW  0x1
+#define BIT_CTLX_EDGE_SW(x) (((x) & BIT_MASK_CTLX_EDGE_SW) << BIT_SHIFT_CTLX_EDGE_SW)
+#define BIT_INV_CTLX_EDGE_SW (~(BIT_MASK_CTLX_EDGE_SW << BIT_SHIFT_CTLX_EDGE_SW))
+
+#define BIT_SHIFT_CTLX_WL 6
+#define BIT_MASK_CTLX_WL  0x1
+#define BIT_CTLX_WL(x) (((x) & BIT_MASK_CTLX_WL) << BIT_SHIFT_CTLX_WL)
+#define BIT_INV_CTLX_WL (~(BIT_MASK_CTLX_WL << BIT_SHIFT_CTLX_WL))
+
+#define BIT_SHIFT_CTLX_LOOP_BACK 7
+#define BIT_MASK_CTLX_LOOP_BACK  0x1
+#define BIT_CTLX_LOOP_BACK(x) (((x) & BIT_MASK_CTLX_LOOP_BACK) << BIT_SHIFT_CTLX_LOOP_BACK)
+#define BIT_INV_CTLX_LOOP_BACK (~(BIT_MASK_CTLX_LOOP_BACK << BIT_SHIFT_CTLX_LOOP_BACK))
+
+
+#define BIT_SHIFT_CTLX_FORMAT 8
+#define BIT_MASK_CTLX_FORMAT  0x3
+#define BIT_CTLX_FORMAT(x) (((x) & BIT_MASK_CTLX_FORMAT) << BIT_SHIFT_CTLX_FORMAT)
+#define BIT_INV_CTLX_FORMAT (~(BIT_MASK_CTLX_FORMAT << BIT_SHIFT_CTLX_FORMAT))
+
+#define BIT_SHIFT_CTLX_LRSWAP 10
+#define BIT_MASK_CTLX_LRSWAP  0x1
+#define BIT_CTLX_LRSWAP(x) (((x) & BIT_MASK_CTLX_LRSWAP) << BIT_SHIFT_CTLX_LRSWAP)
+#define BIT_INV_CTLX_LRSWAP (~(BIT_MASK_CTLX_LRSWAP << BIT_SHIFT_CTLX_LRSWAP))
+
+#define BIT_SHIFT_CTLX_SCK_INV 11
+#define BIT_MASK_CTLX_SCK_INV  0x1
+#define BIT_CTLX_SCK_INV(x) (((x) & BIT_MASK_CTLX_SCK_INV) << BIT_SHIFT_CTLX_SCK_INV)
+#define BIT_INV_CTLX_SCK_INV (~(BIT_MASK_CTLX_SCK_INV << BIT_SHIFT_CTLX_SCK_INV))
+
+#define BIT_SHIFT_CTLX_ENDIAN_SWAP 12
+#define BIT_MASK_CTLX_ENDIAN_SWAP  0x1
+#define BIT_CTLX_ENDIAN_SWAP(x) (((x) & BIT_MASK_CTLX_ENDIAN_SWAP) << BIT_SHIFT_CTLX_ENDIAN_SWAP)
+#define BIT_INV_CTLX_ENDIAN_SWAP (~(BIT_MASK_CTLX_ENDIAN_SWAP << BIT_SHIFT_CTLX_ENDIAN_SWAP))
+
+
+#define BIT_SHIFT_CTLX_DEBUG_SWITCH 15
+#define BIT_MASK_CTLX_DEBUG_SWITCH  0x3
+#define BIT_CTLX_DEBUG_SWITCH(x) (((x) & BIT_MASK_CTLX_DEBUG_SWITCH) << BIT_SHIFT_CTLX_DEBUG_SWITCH)
+#define BIT_INV_CTLX_DEBUG_SWITCH (~(BIT_MASK_CTLX_DEBUG_SWITCH << BIT_SHIFT_CTLX_DEBUG_SWITCH))
+
+#define BIT_SHIFT_CTLX_SLAVE_SEL 29
+#define BIT_MASK_CTLX_SLAVE_SEL  0x1
+#define BIT_CTLX_SLAVE_SEL(x) (((x) & BIT_MASK_CTLX_SLAVE_SEL) << BIT_SHIFT_CTLX_SLAVE_SEL)
+#define BIT_INV_CTLX_SLAVE_SEL (~(BIT_MASK_CTLX_SLAVE_SEL << BIT_SHIFT_CTLX_SLAVE_SEL))
+
+
+#define BIT_SHIFT_CTLX_CLK_SRC 30
+#define BIT_MASK_CTLX_CLK_SRC  0x1
+#define BIT_CTLX_CLK_SRC(x) (((x) & BIT_MASK_CTLX_CLK_SRC) << BIT_SHIFT_CTLX_CLK_SRC)
+#define BIT_INV_CTLX_CLK_SRC (~(BIT_MASK_CTLX_CLK_SRC << BIT_SHIFT_CTLX_CLK_SRC))
+
+
+
+#define BIT_SHIFT_CTLX_SW_RSTN 31
+#define BIT_MASK_CTLX_SW_RSTN  0x1
+#define BIT_CTLX_SW_RSTN(x) (((x) & BIT_MASK_CTLX_SW_RSTN) << BIT_SHIFT_CTLX_SW_RSTN)
+#define BIT_INV_CTLX_SW_RSTN (~(BIT_MASK_CTLX_SW_RSTN << BIT_SHIFT_CTLX_SW_RSTN))
+
+
+#define BIT_SHIFT_SETTING_PAGE_SZ 0
+#define BIT_MASK_SETTING_PAGE_SZ  0xFFF
+#define BIT_SETTING_PAGE_SZ(x) (((x) & BIT_MASK_SETTING_PAGE_SZ) << BIT_SHIFT_SETTING_PAGE_SZ)
+#define BIT_INV_SETTING_PAGE_SZ (~(BIT_MASK_SETTING_PAGE_SZ << BIT_SHIFT_SETTING_PAGE_SZ))
+
+#define BIT_SHIFT_SETTING_PAGE_NUM 12
+#define BIT_MASK_SETTING_PAGE_NUM  0x3
+#define BIT_SETTING_PAGE_NUM(x) (((x) & BIT_MASK_SETTING_PAGE_NUM) << BIT_SHIFT_SETTING_PAGE_NUM)
+#define BIT_INV_SETTING_PAGE_NUM (~(BIT_MASK_SETTING_PAGE_NUM << BIT_SHIFT_SETTING_PAGE_NUM))
+
+#define BIT_SHIFT_SETTING_SAMPLE_RATE 14
+#define BIT_MASK_SETTING_SAMPLE_RATE  0x7
+#define BIT_SETTING_SAMPLE_RATE(x) (((x) & BIT_MASK_SETTING_SAMPLE_RATE) << BIT_SHIFT_SETTING_SAMPLE_RATE)
+#define BIT_INV_SETTING_SAMPLE_RATE (~(BIT_MASK_SETTING_SAMPLE_RATE << BIT_SHIFT_SETTING_SAMPLE_RATE))
+*/
+
+typedef enum _I2S_CTL_FORMAT {
+    FormatI2s             = 0x00,
+    FormatLeftJustified   = 0x01,
+    FormatRightJustified  = 0x02
+}I2S_CTL_FORMAT, *PI2S_CTL_FORMAT;
+
+typedef enum _I2S_CTL_CHNUM {
+    ChannelStereo      = 0x00,
+    Channel5p1         = 0x01,
+    ChannelMono        = 0x02
+}I2S_CTL_CHNUM, *PI2S_CTL_CHNUM;
+
+typedef enum _I2S_CTL_TRX_ACT {
+    RxOnly             = 0x00,
+    TxOnly             = 0x01,
+    TXRX               = 0x02
+}I2S_CTL_TRX_ACT, *PI2S_CTL_TRX_ACT;
+/*
+typedef struct _I2S_CTL_REG_ {
+    I2S_CTL_FORMAT         Format;
+    I2S_CTL_CHNUM          ChNum;
+    I2S_CTL_TRX_ACT        TrxAct;
+
+    u32                    I2s_En         :1; // Bit 0
+    u32                    Rsvd1to4       :4; // Bit 1-4 is TrxAct, ChNum
+    u32                    EdgeSw         :1; // Bit 5 Edge switch
+    u32                    WordLength     :1; // Bit 6
+    u32                    LoopBack       :1; // Bit 7
+    u32                    Rsvd8to9       :2; // Bit 8-9 is Format
+    u32                    DacLrSwap      :1; // Bit 10
+    u32                    SckInv         :1; // Bit 11
+    u32                    EndianSwap     :1; // Bit 12
+    u32                    Rsvd13to14     :2; // Bit 11-14
+    u32                    DebugSwitch    :2; // Bit 15-16
+    u32                    Rsvd17to28    :12; // Bit 17-28
+    u32                    SlaveMode      :1; // Bit 29
+    u32                    SR44p1KHz      :1; // Bit 30
+    u32                    SwRstn         :1; // Bit 31
+} I2S_CTL_REG, *PI2S_CTL_REG;
+*/
+typedef enum _I2S_SETTING_PAGE_NUM {
+    I2s1Page           = 0x00,
+    I2s2Page           = 0x01,
+    I2s3Page           = 0x02,
+    I2s4Page           = 0x03
+}I2S_SETTING_PAGE_NUM, *PI2S_SETTING_PAGE_NUM;
+
+//sampling rate
+typedef enum _I2S_SETTING_SR {
+    I2sSR8K            = 0x00,
+    I2sSR16K           = 0x01,
+    I2sSR24K           = 0x02,
+    I2sSR32K           = 0x03,
+    I2sSR48K           = 0x05,
+    I2sSR44p1K         = 0x15,
+    I2sSR96K           = 0x06,
+    I2sSR88p2K         = 0x16
+}I2S_SETTING_SR, *PI2S_SETTING_SR;
+/*
+typedef struct _I2S_SETTING_REG_ {
+    I2S_SETTING_PAGE_NUM     PageNum;
+    I2S_SETTING_SR           SampleRate;
+
+    u32                      PageSize:12; // Bit 0-11
+}I2S_SETTING_REG, *PI2S_SETTING_REG;
+
+typedef enum _I2S_TX_ISR {
+    I2sTxP0OK          = 0x01,
+    I2sTxP1OK          = 0x02,
+    I2sTxP2OK          = 0x04,
+    I2sTxP3OK          = 0x08,
+    I2sTxPageUn        = 0x10,
+    I2sTxFifoEmpty     = 0x20
+}I2S_TX_ISR, *PI2S_TX_ISR;
+
+typedef enum _I2S_RX_ISR {
+    I2sRxP0OK          = 0x01,
+    I2sRxP1OK          = 0x02,
+    I2sRxP2OK          = 0x04,
+    I2sRxP3OK          = 0x08,
+    I2sRxPageUn        = 0x10,
+    I2sRxFifoFull      = 0x20
+}I2S_RX_ISR, *PI2S_RX_ISR;
+*/
+
+/* Hal I2S function prototype*/
+RTK_STATUS
+HalI2SInitRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SInitRtl8195a_Patch(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SDeInitRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2STxRtl8195a(
+    IN  VOID    *Data,
+	IN  u8      *pBuff
+);
+
+RTK_STATUS
+HalI2SRxRtl8195a(
+    IN  VOID    *Data,
+	OUT u8      *pBuff
+);
+
+RTK_STATUS
+HalI2SEnableRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SIntrCtrlRtl8195a(
+    IN  VOID    *Data
+);
+
+u32
+HalI2SReadRegRtl8195a(
+    IN  VOID    *Data,
+    IN  u8      I2SReg
+);
+
+RTK_STATUS
+HalI2SSetRateRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetWordLenRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetChNumRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetPageNumRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetPageSizeRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetDirectionRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SSetDMABufRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SClrIntrRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SClrAllIntrRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SDMACtrlRtl8195a(
+    IN  VOID    *Data
+);
+
+u8
+HalI2SGetTxPageRtl8195a(
+    IN  VOID    *Data
+);
+
+u8
+HalI2SGetRxPageRtl8195a(
+    IN  VOID    *Data
+);
+
+RTK_STATUS
+HalI2SPageSendRtl8195a(
+    IN  VOID    *Data,
+	IN  u8      PageIdx
+);
+
+#if 0
+RTK_STATUS
+HalI2SPageRecvRtl8195a(
+    IN  VOID    *Data,
+	IN u8      PageIdx
+);
+#else
+RTK_STATUS
+HalI2SPageRecvRtl8195a(
+    IN  VOID    *Data
+);
+#endif
+
+RTK_STATUS
+HalI2SClearAllOwnBitRtl8195a(
+    IN  VOID    *Data
+);
+
+
+// HAL functions Wrapper
+static __inline VOID
+HalI2SSetRate(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetRateRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetWordLen(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetWordLenRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetChNum(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetChNumRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetPageNum(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetPageNumRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetPageSize(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetPageSizeRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetDirection(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetDirectionRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SSetDMABuf(
+    IN  VOID    *Data
+)
+{
+    HalI2SSetDMABufRtl8195a(Data);
+}
+
+static __inline u8
+HalI2SGetTxPage(
+    IN  VOID    *Data
+)
+{
+    return HalI2SGetTxPageRtl8195a(Data);
+}
+
+static __inline u8
+HalI2SGetRxPage(
+    IN  VOID    *Data
+)
+{
+    return HalI2SGetRxPageRtl8195a(Data);
+}
+
+static __inline VOID
+HalI2SPageSend(
+    IN  VOID    *Data,
+	IN  u8      PageIdx
+)
+{
+    HalI2SPageSendRtl8195a(Data, PageIdx);
+}
+
+#if 0
+static __inline VOID
+HalI2SPageRecv(
+    IN  VOID    *Data,
+	IN u8      PageIdx
+)
+{
+    HalI2SPageRecvRtl8195a(Data, PageIdx);
+}
+#else
+static __inline VOID
+HalI2SPageRecv(
+    IN  VOID    *Data
+)
+{
+    HalI2SPageRecvRtl8195a(Data);
+}
+#endif
+
+static __inline VOID
+HalI2SClearAllOwnBit(
+    IN  VOID    *Data
+)
+{
+    HalI2SClearAllOwnBitRtl8195a(Data);
+}
+
+#endif /* _RTL8195A_I2S_H_ */
+
+

lib/fwlib/rtl8195a/rtl8195a_mii.h

@@ -0,0 +1,674 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_MII_H_
+#define _RTL8195A_MII_H_
+
+#include "basic_types.h"
+#include "hal_api.h"
+
+
+#define ETHERNET_REG_BASE     0x40050000
+#define ETHERNET_MODULE_BASE  ETHERNET_REG_BASE + 0x0000
+#define CPU_INTERFACE_BASE    ETHERNET_REG_BASE + 0x1300
+
+/* Ethernet Module registers */
+#define REG_RTL_MII_IDR0    0x0000  // Table 2 IDR0 (Offset 0000h-0003h, R/W)
+#define REG_RTL_MII_IDR4    0x0004  // Table 3 IDR4 (Offset 0004h-0007h, R/W)
+#define REG_RTL_MII_MAR0    0x0008  // Table 4 MAR0 (Offset 0008h-000bh, R/W)
+#define REG_RTL_MII_MAR4    0x000C  // Table 5 MAR4 (Offset 000ch-000fh, R/W)
+#define REG_RTL_MII_CR      0x0038  // Table 21 Command Register          (COM_REG, Offset 0038-003Bh, R/W)
+#define REG_RTL_MII_IMRISR  0x003C  // Table 22 + Table 23
+#define REG_RTL_MII_TCR     0x0040  // Table 24 Transmit Configuration Register (TC_REG, Offset 0040h-0043h, R/W)
+#define REG_RTL_MII_RCR     0x0044  // Table 25 Receive Configuration Register  (RC_REG, Offset 0044h-0047h, R/W)
+#define REG_RTL_MII_CTCR    0x0048  // Table 26 CPU Tag Control Register  (CPUTAG_REG, Offset 0048h-004bh, R/W)
+#define REG_RTL_MII_CONFIG  0x004C  // Table 27 Configuration Register (CONFIG_REG, Offset 004ch-004fh, R/W)
+#define REG_RTL_MII_CTCR1   0x0050  // Table 28 CPUTAG1 Register          (CPUTAG1_REG, Offset 0050h-0053h, R/W)
+#define REG_RTL_MII_MSR     0x0058  // Table 29 Media Status Register     (MS_reg: Offset 0058h – 005bh, R/W)
+#define REG_RTL_MII_MIIAR   0x005C  // Table 30 MII Access Register (MIIA_REG, Offset 005c-005fh, R/W)
+#define REG_RTL_MII_VR      0x0064  // Table 32 VLAN Register (VLAN_REG, Offset 0064-0067h, R/W)
+#define REG_RTL_MII_IMR0    0x00D0  // Table 50 IMR0_REG (IMR0_REG, Offset D0h-D3h)
+#define REG_RTL_MII_IMR1    0x00D4  // Table 51 IMR1_REG (IMR1_REG, Offset d4h-d7h)
+#define REG_RTL_MII_ISR1    0x00D8  // Table 52 ISR1 Register (ISR1_REG, Offset D8h-DBh)
+#define REG_RTL_MII_INTR    0x00DC  // Table 53 Interrupt routing register (INTR_REG, Offset DCh-DFh)
+#define REG_RTL_MII_CCR     0x00E4  // Table xx Clock Control Register (CLKCTL_REG, Offset E4h-E7h)
+
+/* CPU Interface registers */
+#define REG_RTL_MII_TXFDP1  0x1300  // Table 55 TxFDP1 register (TXFDP1_REG, offset 1300h-1303h)
+#define REG_RTL_MII_TXCDO1  0x1304  // Table 56 TxCDO1 register (TXCDO1_REG, offset 1304h-1305h)
+#define REG_RTL_MII_TXFDP2  0x1310  // Table 57 TxFDP2 register (TXFDP2_REG, offset 1310h-1313h)
+#define REG_RTL_MII_TXCDO2  0x1314  // Table 58 TxCDO2 register (TXCDO2_REG, offset 1314h-1315h)
+#define REG_RTL_MII_TXFDP3  0x1320  // Table 59 TxFDP3 register (TXFDP3_REG, offset 1320h-1323h)
+#define REG_RTL_MII_TXCDO3  0x1324  // Table 60 TxCDO3 register (TXCDO3_REG, offset 1324h-1325h)
+#define REG_RTL_MII_TXFDP4  0x1330  // Table 61 TxFDP4 register (TXFDP4_REG, offset 1330h-1333h)
+#define REG_RTL_MII_TXCDO4  0x1334  // Table 62 TxCDO4 register (TXCDO4_REG, offset 1334h-1335h)
+#define REG_RTL_MII_TXFDP5  0x1340  // Table 63 TxFDP5 register (TXFDP5_REG, offset 1340h-1343h)
+#define REG_RTL_MII_TXCDO5  0x1344  // Table 64 TxCDO5 register (TXCDO5_REG, offset 1344h-1345h)
+#define REG_RTL_MII_RXFDP2  0x1390  // Table 66 RxFDP2 register (RXFDP#_REG, offset 1390h-1393h)
+#define REG_RTL_MII_RXFDP1  0x13F0  // Table 71 RxFDP1 register (RXFDP1_REG, offset 13F0h-13F3h)
+#define REG_RTL_MII_RXRS1   0x13F6  // Table 73 Rx Ring Size1 register (RX_RS1_REG, offset 13F6h-13F7h)
+
+#define REG_RTL_MII_RX_PSE1   0x142C  // Table 77 Rx_Pse_Des_Thres_1_h (RX_PSE1_REG, Offset 142ch)
+#define REG_RTL_MII_ETNRXCPU1 0x1430  // Table 79 EhtrntRxCPU_Des_Num1 (ETNRXCPU1_REG, Offset 1430h-1433h)
+#define REG_RTL_MII_IOCMD     0x1434  // Table 80 Ethernet_IO_CMD (ETN_IO_CMD_REG, Offset 1434h-1437h)
+#define REG_RTL_MII_IOCMD1    0x1438  // Table 81 Ethernet_IO_CMD1 (IO_CMD1_REG: Offset 1438h-143bh)
+
+
+#define HAL_MII_READ32(addr)         \
+    HAL_READ32(ETHERNET_REG_BASE, addr)
+#define HAL_MII_WRITE32(addr, value) \
+    HAL_WRITE32(ETHERNET_REG_BASE, addr, value)
+#define HAL_MII_READ16(addr)         \
+    HAL_READ16(ETHERNET_REG_BASE, addr)
+#define HAL_MII_WRITE16(addr, value) \
+    HAL_WRITE16(ETHERNET_REG_BASE, addr, value)
+#define HAL_MII_READ8(addr)          \
+    HAL_READ8(ETHERNET_REG_BASE, addr)
+#define HAL_MII_WRITE8(addr, value)  \
+    HAL_WRITE8(ETHERNET_REG_BASE, addr, value)
+
+#define  CMD_CONFIG  0x00081000
+
+//2014-04-29 yclin (disable [27] r_en_precise_dma)
+// #define CMD1_CONFIG  0x39000000
+#define CMD1_CONFIG  0x31000000
+
+// #define MAX_RX_DESC_SIZE  6
+#define MAX_RX_DESC_SIZE  1
+#define MAX_TX_DESC_SIZE  5
+
+// 0058h
+#define BIT_SHIFT_MSR_FORCE_SPEED_SELECT    16
+#define BIT_MASK_MSR_FORCE_SPEED_SELECT     0x3
+#define BIT_MSR_FORCE_SPEED_SELECT(x)(((x) & BIT_MASK_MSR_FORCE_SPEED_SELECT) << BIT_SHIFT_MSR_FORCE_SPEED_SELECT)
+#define BIT_INVC_MSR_FORCE_SPEED_SELECT (~(BIT_MASK_MSR_FORCE_SPEED_SELECT << BIT_SHIFT_MSR_FORCE_SPEED_SELECT))
+
+#define BIT_SHIFT_MSR_FORCE_SPEED_MODE_ENABLE    10
+#define BIT_MASK_MSR_FORCE_SPEED_MODE_ENABLE     0x1
+#define BIT_MSR_FORCE_SPEED_MODE_ENABLE(x)(((x) & BIT_MASK_MSR_FORCE_SPEED_MODE_ENABLE) << BIT_SHIFT_MSR_FORCE_SPEED_MODE_ENABLE)
+#define BIT_INVC_MSR_FORCE_SPEED_MODE_ENABLE (~(BIT_MASK_MSR_FORCE_SPEED_MODE_ENABLE << BIT_SHIFT_MSR_FORCE_SPEED_MODE_ENABLE))
+
+// 1434h
+#define BIT_SHIFT_IOCMD_RXENABLE      5
+#define BIT_MASK_IOCMD_RXENABLE       0x1
+#define BIT_IOCMD_RXENABLE(x)(((x) & BIT_MASK_IOCMD_RXENABLE) << BIT_SHIFT_IOCMD_RXENABLE)
+#define BIT_INVC_IOCMD_RXENABLE (~(BIT_MASK_IOCMD_RXENABLE << BIT_SHIFT_IOCMD_RXENABLE))
+
+#define BIT_SHIFT_IOCMD_TXENABLE      4
+#define BIT_MASK_IOCMD_TXENABLE       0x1
+#define BIT_IOCMD_TXENABLE(x)(((x) & BIT_MASK_IOCMD_TXENABLE) << BIT_SHIFT_IOCMD_TXENABLE)
+#define BIT_INVC_IOCMD_TXENABLE (~(BIT_MASK_IOCMD_TXENABLE << BIT_SHIFT_IOCMD_TXENABLE))
+
+#define BIT_SHIFT_IOCMD_FIRST_DMATX_ENABLE      0
+#define BIT_MASK_IOCMD_FIRST_DMATX_ENABLE       0x1
+#define BIT_IOCMD_FIRST_DMATX_ENABLE(x)(((x) & BIT_MASK_IOCMD_FIRST_DMATX_ENABLE) << BIT_SHIFT_IOCMD_FIRST_DMATX_ENABLE)
+#define BIT_INVC_IOCMD_FIRST_DMATX_ENABLE (~(BIT_MASK_IOCMD_FIRST_DMATX_ENABLE << BIT_SHIFT_IOCMD_FIRST_DMATX_ENABLE))
+
+// 1438h
+#define BIT_SHIFT_IOCMD1_FIRST_DMARX_ENABLE    16
+#define BIT_MASK_IOCMD1_FIRST_DMARX_ENABLE     0x1
+#define BIT_IOCMD1_FIRST_DMARX_ENABLE(x)(((x) & BIT_MASK_IOCMD1_FIRST_DMARX_ENABLE) << BIT_SHIFT_IOCMD1_FIRST_DMARX_ENABLE)
+#define BIT_INVC_IOCMD1_FIRST_DMARX_ENABLE (~(BIT_MASK_IOCMD1_FIRST_DMARX_ENABLE << BIT_SHIFT_IOCMD1_FIRST_DMARX_ENABLE))
+
+
+/**
+ * 1.4.1.7 Tx command descriptor used in RL6266
+ *   5 dobule words
+ */
+typedef struct _TX_INFO_ {
+    union {
+        struct {
+            u32 own:1;          //31
+            u32 eor:1;          //30
+            u32 fs:1;           //29
+            u32 ls:1;           //28
+            u32 ipcs:1;         //27
+            u32 l4cs:1;         //26
+            u32 keep:1;         //25
+            u32 blu:1;          //24
+            u32 crc:1;          //23
+            u32 vsel:1;         //22
+            u32 dislrn:1;       //21
+            u32 cputag_ipcs:1;  //20
+            u32 cputag_l4cs:1;  //19
+            u32 cputag_psel:1;  //18
+            u32 rsvd:1;         //17
+            u32 data_length:17; //0~16
+        } bit;
+        u32 dw; //double word
+    } opts1;
+
+    u32 addr;
+
+    union {
+        struct {
+            u32 cputag:1;          //31
+            u32 aspri:1;           //30
+            u32 cputag_pri:3;      //27~29
+            u32 tx_vlan_action:2;  //25~26
+            u32 tx_pppoe_action:2; //23~24
+            u32 tx_pppoe_idx:3;    //20~22
+            u32 efid:1;            //19
+            u32 enhance_fid:3;     //16~18
+            u32 vidl:8;            // 8~15
+            u32 prio:3;            // 5~7
+            u32 cfi:1;             // 4
+            u32 vidh:4;            // 0~3
+        } bit;
+        u32 dw; //double word
+    } opts2;
+
+    union {
+        struct {
+            u32 extspa:3;           //29~31
+            u32 tx_portmask:6;      //23~28
+            u32 tx_dst_stream_id:7; //16~22
+            u32 rsvd:14;            // 2~15
+            u32 l34keep:1;          // 1
+            u32 ptp:1;              // 0
+        } bit;
+        u32 dw; //double word
+    } opts3;
+
+    union {
+        struct {
+            u32 lgsen:1;  //31
+            u32 lgmss:11; //20~30
+            u32 rsvd:20;  // 0~19
+        } bit;
+        u32 dw; //double word
+    } opts4;
+
+} TX_INFO, *PTX_INFO;
+
+typedef struct _RX_INFO_ {
+    union{
+        struct{
+            u32 own:1;          //31
+            u32 eor:1;          //30
+            u32 fs:1;           //29
+            u32 ls:1;           //28
+            u32 crcerr:1;       //27
+            u32 ipv4csf:1;      //26
+            u32 l4csf:1;        //25
+            u32 rcdf:1;         //24
+            u32 ipfrag:1;       //23
+            u32 pppoetag:1;     //22
+            u32 rwt:1;          //21
+            u32 pkttype:4;      //20-17
+            u32 l3routing:1;    //16
+            u32 origformat:1;   //15
+            u32 pctrl:1;        //14
+#ifdef CONFIG_RG_JUMBO_FRAME
+            u32 data_length:14; //13~0
+#else
+            u32 rsvd:2;         //13~12
+            u32 data_length:12; //11~0
+#endif
+        }bit;
+        u32 dw; //double word
+    }opts1;
+
+    u32 addr;
+
+    union{
+        struct{
+            u32 cputag:1;               //31
+            u32 ptp_in_cpu_tag_exist:1; //30
+            u32 svlan_tag_exist:1;      //29
+            u32 rsvd_2:2;               //27~28
+            u32 pon_stream_id:7;        //20~26
+            u32 rsvd_1:3;               //17~19
+            u32 ctagva:1;               //16
+            u32 cvlan_tag:16;           //15~0
+        }bit;
+        u32 dw; //double word
+    }opts2;
+
+    union{
+        struct{
+            u32 src_port_num:5;      //27~31
+            u32 dst_port_mask:6;     //21~26
+            u32 reason:8;            //13~20
+            u32 internal_priority:3; //10~12
+            u32 ext_port_ttl_1:5;    //5~9
+            u32 rsvd:5;              //4~0
+        }bit;
+        u32 dw; //double word
+    }opts3;
+} RX_INFO, *PRX_INFO;
+
+/**
+ * GMAC_STATUS_REGS
+ */
+// TX/RX Descriptor Common
+#define BIT_SHIFT_GMAC_DESCOWN        31
+#define BIT_MASK_GMAC_DESCOWN        0x1
+#define BIT_GMAC_DESCOWN(x)(((x) & BIT_MASK_GMAC_DESCOWN) << BIT_SHIFT_GMAC_DESCOWN)
+#define BIT_INVC_GMAC_DESCOWN (~(BIT_MASK_GMAC_DESCOWN << BIT_SHIFT_GMAC_DESCOWN))
+
+#define BIT_SHIFT_GMAC_RINGEND        30
+#define BIT_MASK_GMAC_RINGEND        0x1
+#define BIT_GMAC_RINGEND(x)(((x) & BIT_MASK_GMAC_RINGEND) << BIT_SHIFT_GMAC_RINGEND)
+#define BIT_INVC_GMAC_RINGEND (~(BIT_MASK_GMAC_RINGEND << BIT_SHIFT_GMAC_RINGEND))
+
+#define BIT_SHIFT_GMAC_FIRSTFRAG      29
+#define BIT_MASK_GMAC_FIRSTFRAG      0x1
+#define BIT_GMAC_FIRSTFRAG(x)(((x) & BIT_MASK_GMAC_FIRSTFRAG) << BIT_SHIFT_GMAC_FIRSTFRAG)
+#define BIT_INVC_GMAC_FIRSTFRAG (~(BIT_MASK_GMAC_FIRSTFRAG << BIT_SHIFT_GMAC_FIRSTFRAG))
+
+#define BIT_SHIFT_GMAC_LASTFRAG       28
+#define BIT_MASK_GMAC_LASTFRAG       0x1
+#define BIT_GMAC_LASTFRAG(x)(((x) & BIT_MASK_GMAC_LASTFRAG) << BIT_SHIFT_GMAC_LASTFRAG)
+#define BIT_INVC_GMAC_LASTFRAG (~(BIT_MASK_GMAC_LASTFRAG << BIT_SHIFT_GMAC_LASTFRAG))
+
+// TX Descriptor opts1
+#define BIT_SHIFT_GMAC_IPCS           27
+#define BIT_MASK_GMAC_IPCS           0x1
+#define BIT_GMAC_IPCS(x)(((x) & BIT_MASK_GMAC_IPCS) << BIT_SHIFT_GMAC_IPCS)
+#define BIT_INVC_GMAC_IPCS (~(BIT_MASK_GMAC_IPCS << BIT_SHIFT_GMAC_IPCS))
+
+#define BIT_SHIFT_GMAC_L4CS           26
+#define BIT_MASK_GMAC_L4CS           0x1
+#define BIT_GMAC_L4CS(x)(((x) & BIT_MASK_GMAC_L4CS) << BIT_SHIFT_GMAC_L4CS)
+#define BIT_INVC_GMAC_L4CS (~(BIT_MASK_GMAC_L4CS << BIT_SHIFT_GMAC_L4CS))
+
+#define BIT_SHIFT_GMAC_KEEP           25
+#define BIT_MASK_GMAC_KEEP           0x1
+#define BIT_GMAC_KEEP(x)(((x) & BIT_MASK_GMAC_KEEP) << BIT_SHIFT_GMAC_KEEP)
+#define BIT_INVC_GMAC_KEEP (~(BIT_MASK_GMAC_KEEP << BIT_SHIFT_GMAC_KEEP))
+
+#define BIT_SHIFT_GMAC_BLU            24
+#define BIT_MASK_GMAC_BLU            0x1
+#define BIT_GMAC_BLU(x)(((x) & BIT_MASK_GMAC_BLU) << BIT_SHIFT_GMAC_BLU)
+#define BIT_INVC_GMAC_BLU (~(BIT_MASK_GMAC_BLU << BIT_SHIFT_GMAC_BLU))
+
+#define BIT_SHIFT_GMAC_TXCRC          23
+#define BIT_MASK_GMAC_TXCRC          0x1
+#define BIT_GMAC_TXCRC(x)(((x) & BIT_MASK_GMAC_TXCRC) << BIT_SHIFT_GMAC_TXCRC)
+#define BIT_INVC_GMAC_TXCRC (~(BIT_MASK_GMAC_TXCRC << BIT_SHIFT_GMAC_TXCRC))
+
+#define BIT_SHIFT_GMAC_VSEL           22
+#define BIT_MASK_GMAC_VSEL           0x1
+#define BIT_GMAC_VSEL(x)(((x) & BIT_MASK_GMAC_VSEL) << BIT_SHIFT_GMAC_VSEL)
+#define BIT_INVC_GMAC_VSEL (~(BIT_MASK_GMAC_VSEL << BIT_SHIFT_GMAC_VSEL))
+
+#define BIT_SHIFT_GMAC_DISLRN         21
+#define BIT_MASK_GMAC_DISLRN         0x1
+#define BIT_GMAC_DISLRN(x)(((x) & BIT_MASK_GMAC_DISLRN) << BIT_SHIFT_GMAC_DISLRN)
+#define BIT_INVC_GMAC_DISLRN (~(BIT_MASK_GMAC_DISLRN << BIT_SHIFT_GMAC_DISLRN))
+
+#define BIT_SHIFT_GMAC_CPUTAG_IPCS    20
+#define BIT_MASK_GMAC_CPUTAG_IPCS    0x1
+#define BIT_GMAC_CPUTAG_IPCS(x)(((x) & BIT_MASK_GMAC_CPUTAG_IPCS) << BIT_SHIFT_GMAC_CPUTAG_IPCS)
+#define BIT_INVC_GMAC_CPUTAG_IPCS (~(BIT_MASK_GMAC_CPUTAG_IPCS << BIT_SHIFT_GMAC_CPUTAG_IPCS))
+
+#define BIT_SHIFT_GMAC_CPUTAG_L4CS    19
+#define BIT_MASK_GMAC_CPUTAG_L4CS    0x1
+#define BIT_GMAC_CPUTAG_L4CS(x)(((x) & BIT_MASK_GMAC_CPUTAG_L4CS) << BIT_SHIFT_GMAC_CPUTAG_L4CS)
+#define BIT_INVC_GMAC_CPUTAG_L4CS (~(BIT_MASK_GMAC_CPUTAG_L4CS << BIT_SHIFT_GMAC_CPUTAG_L4CS))
+
+#define BIT_SHIFT_GMAC_CPUTAG_PSEL    18
+#define BIT_MASK_GMAC_CPUTAG_PSEL    0x1
+#define BIT_GMAC_CPUTAG_PSEL(x)(((x) & BIT_MASK_GMAC_CPUTAG_PSEL) << BIT_SHIFT_GMAC_CPUTAG_PSEL)
+#define BIT_INVC_GMAC_CPUTAG_PSEL (~(BIT_MASK_GMAC_CPUTAG_PSEL << BIT_SHIFT_GMAC_CPUTAG_PSEL))
+
+
+#if 0
+enum RE8670_STATUS_REGS
+{
+    /*TX/RX share */
+    DescOwn     = (1 << 31), /* Descriptor is owned by NIC */
+    RingEnd     = (1 << 30), /* End of descriptor ring */
+    FirstFrag       = (1 << 29), /* First segment of a packet */
+    LastFrag        = (1 << 28), /* Final segment of a packet */
+
+    /*Tx descriptor opt1*/
+    IPCS        = (1 << 27),
+    L4CS        = (1 << 26),
+    KEEP        = (1 << 25),
+    BLU         = (1 << 24),
+    TxCRC       = (1 << 23),
+    VSEL        = (1 << 22),
+    DisLrn      = (1 << 21),
+    CPUTag_ipcs     = (1 << 20),
+    CPUTag_l4cs = (1 << 19),
+
+    /*Tx descriptor opt2*/
+    CPUTag      = (1 << 31),
+    aspri       = (1 << 30),
+    CPRI        = (1 << 27),
+    TxVLAN_int  = (0 << 25),  //intact
+    TxVLAN_ins  = (1 << 25),  //insert
+    TxVLAN_rm   = (2 << 25),  //remove
+    TxVLAN_re   = (3 << 25),  //remark
+    //TxPPPoEAct    = (1 << 23),
+    TxPPPoEAct  = 23,
+    //TxPPPoEIdx    = (1 << 20),
+    TxPPPoEIdx  = 20,
+    Efid            = (1 << 19),
+    //Enhan_Fid = (1 << 16),
+    Enhan_Fid   = 16,
+    /*Tx descriptor opt3*/
+    SrcExtPort  = 29,
+    TxDesPortM  = 23,
+    TxDesStrID  = 16,
+    TxDesVCM    = 0,
+    /*Tx descriptor opt4*/
+    /*Rx descriptor  opt1*/
+    CRCErr  = (1 << 27),
+    IPV4CSF     = (1 << 26),
+    L4CSF       = (1 << 25),
+    RCDF        = (1 << 24),
+    IP_FRAG     = (1 << 23),
+    PPPoE_tag   = (1 << 22),
+    RWT         = (1 << 21),
+    PktType     = (1 << 17),
+    RxProtoIP   = 1,
+    RxProtoPPTP = 2,
+    RxProtoICMP = 3,
+    RxProtoIGMP = 4,
+    RxProtoTCP  = 5,   
+    RxProtoUDP  = 6,
+    RxProtoIPv6 = 7,
+    RxProtoICMPv6   = 8,
+    RxProtoTCPv6    = 9,
+    RxProtoUDPv6    = 10,
+    L3route     = (1 << 16),
+    OrigFormat  = (1 << 15),
+    PCTRL       = (1 << 14),
+    /*Rx descriptor opt2*/
+    PTPinCPU    = (1 << 30),
+    SVlanTag        = (1 << 29),
+    /*Rx descriptor opt3*/
+    SrcPort     = (1 << 27),
+    DesPortM    = (1 << 21),
+    Reason      = (1 << 13),
+    IntPriority = (1 << 10),
+    ExtPortTTL  = (1 << 5),
+};
+
+enum _DescStatusBit {
+    DescOwn     = (1 << 31), /* Descriptor is owned by NIC */
+    RingEnd     = (1 << 30), /* End of descriptor ring */
+    FirstFrag   = (1 << 29), /* First segment of a packet */
+    LastFrag    = (1 << 28), /* Final segment of a packet */
+
+    /* Tx private */
+    LargeSend   = (1 << 27), /* TCP Large Send Offload (TSO) */
+    MSSShift    = 16,        /* MSS value position */
+    MSSMask     = 0xfff,     /* MSS value + LargeSend bit: 12 bits */
+    IPCS        = (1 << 18), /* Calculate IP checksum */
+    UDPCS       = (1 << 17), /* Calculate UDP/IP checksum */
+    TCPCS       = (1 << 16), /* Calculate TCP/IP checksum */
+    TxVlanTag   = (1 << 17), /* Add VLAN tag */
+
+    /* Rx private */
+    PID1        = (1 << 18), /* Protocol ID bit 1/2 */
+    PID0        = (1 << 17), /* Protocol ID bit 2/2 */
+
+#define RxProtoUDP  (PID1)
+#define RxProtoTCP  (PID0)
+#define RxProtoIP   (PID1 | PID0)
+#define RxProtoMask RxProtoIP
+
+    IPFail      = (1 << 16), /* IP checksum failed */
+    UDPFail     = (1 << 15), /* UDP/IP checksum failed */
+    TCPFail     = (1 << 14), /* TCP/IP checksum failed */
+    RxVlanTag   = (1 << 16), /* VLAN tag available */
+};
+#endif
+
+typedef struct _PHY_MODE_INFO_ {
+    u8 PhyAddress;
+    u8 PhyMode;
+    u8 PhyInterface;
+} PHY_MODE_INFO, *PPHY_MODE_INFO;
+
+typedef enum _PHY_MODE_SWITCH_ {
+    PHY_MODE_DISABLE = 0,
+    PHY_MODE_ENABLE  = 1
+} PHY_MODE_SWITCH, *PPHY_MODE_SWITCH;
+
+typedef enum _PHY_INTERFACE_SELECT_ {
+    PHY_INTERFACE_ONE_WORKS  = 0,
+    PHY_INTERFACE_ZERO_WORKS = 1
+} PHY_INTERFACE_SELECT, *PPHY_INTERFACE_SELECT;
+
+typedef enum _GMAC_MSR_FORCE_SPEED_ {
+    FORCE_SPD_100M = 0,
+    FORCE_SPD_10M  = 1,
+    FORCE_SPD_GIGA = 2,
+    NO_FORCE_SPD   = 3
+}GMAC_MSR_FORCE_SPEED, *PGMAC_MSR_FORCE_SPEED;
+
+// typedef enum _GMAC_INTERRUPT_MASK_ {
+//     GMAC_IMR_ROK      = BIT0,
+//     GMAC_IMR_CNT_WRAP = BIT1,
+//     GMAC_IMR_RER_RUNT = BIT2,
+//     // BIT3 Reserved
+//     GMAC_IMR_RER_OVF  = BIT4,
+//     GMAC_IMR_RDU      = BIT5,
+//     GMAC_IMR_TOK_TI   = BIT6,
+//     GMAC_IMR_TER      = BIT7,
+//     GMAC_IMR_LINKCHG  = BIT8,
+//     GMAC_IMR_TDU      = BIT9,
+//     GMAC_IMR_SWINT    = BIT10,
+//     GMAC_IMR_RDU2     = BIT11,
+//     GMAC_IMR_RDU3     = BIT12,
+//     GMAC_IMR_RDU4     = BIT13,
+//     GMAC_IMR_RDU5     = BIT14,
+//     GMAC_IMR_RDU6     = BIT15,
+// } GMAC_INTERRUPT_MASK, *PGMAC_INTERRUPT_MASK;
+
+typedef enum _GMAC_INTERRUPT_MASK_ {
+    GMAC_IMR_ROK      = BIT16,
+    GMAC_IMR_CNT_WRAP = BIT17,
+    GMAC_IMR_RER_RUNT = BIT18,
+    // BIT19 Reserved
+    GMAC_IMR_RER_OVF  = BIT20,
+    GMAC_IMR_RDU      = BIT21,
+    GMAC_IMR_TOK_TI   = BIT22,
+    GMAC_IMR_TER      = BIT23,
+    GMAC_IMR_LINKCHG  = BIT24,
+    GMAC_IMR_TDU      = BIT25,
+    GMAC_IMR_SWINT    = BIT26,
+    GMAC_IMR_RDU2     = BIT27,
+    GMAC_IMR_RDU3     = BIT28,
+    GMAC_IMR_RDU4     = BIT29,
+    GMAC_IMR_RDU5     = BIT30,
+    GMAC_IMR_RDU6     = BIT31,
+} GMAC_INTERRUPT_MASK, *PGMAC_INTERRUPT_MASK;
+
+typedef enum _GMAC_INTERRUPT_STATUS_ {
+    GMAC_ISR_ROK      = BIT0,
+    GMAC_ISR_CNT_WRAP = BIT1,
+    GMAC_ISR_RER_RUNT = BIT2,
+    // BIT3 Reserved
+    GMAC_ISR_RER_OVF  = BIT4,
+    GMAC_ISR_RDU      = BIT5,
+    GMAC_ISR_TOK_TI   = BIT6,
+    GMAC_ISR_TER      = BIT7,
+    GMAC_ISR_LINKCHG  = BIT8,
+    GMAC_ISR_TDU      = BIT9,
+    GMAC_ISR_SWINT    = BIT10,
+    GMAC_ISR_RDU2     = BIT11,
+    GMAC_ISR_RDU3     = BIT12,
+    GMAC_ISR_RDU4     = BIT13,
+    GMAC_ISR_RDU5     = BIT14,
+    GMAC_ISR_RDU6     = BIT15,
+} GMAC_INTERRUPT_STATUS, *PGMAC_INTERRUPT_STATUS;
+
+typedef enum _GMAC_TX_VLAN_ACTION_ {
+    INTACT			= 0,
+    INSERT_VLAN_HDR = 1,
+    REMOVE_VLAN_HDR = 2,
+    REMARKING_VID   = 3
+}GMAC_TX_VLAN_ACTION, *PGMAC_TX_VLAN_ACTION;
+
+typedef enum _GMAC_RX_PACKET_TYPE_ {
+    TYPE_ETHERNET	= 0,
+    TYPE_IPV4		= 1,
+    TYPE_IPV4_PPTP	= 2,
+    TYPE_IPV4_ICMP	= 3,
+	TYPE_IPV4_IGMP	= 4,
+	TYPE_IPV4_TCP	= 5,
+	TYPE_IPV4_UDP	= 6,
+	TYPE_IPV6		= 7,
+	TYPE_ICMPV6		= 8,
+	TYPE_IPV6_TCP	= 9,
+	TYPE_IPV6_UDP	= 10	
+}GMAC_RX_PACKET_TYPE, *PGMAC_RX_PACKET_TYPE;
+
+
+/*
+
+// Memory Map of DW_apb_ssi
+#define REG_DW_SSI_CTRLR0          0x00  // 16 bits
+#define REG_DW_SSI_CTRLR1          0x04  // 16 bits
+#define REG_DW_SSI_SSIENR          0x08  //  1 bit
+#define REG_DW_SSI_RX_SAMPLE_DLY   0xF0  //  8 bits
+#define REG_DW_SSI_RSVD_0          0xF4  // 32 bits
+#define REG_DW_SSI_RSVD_1          0xF8  // 32 bits
+#define REG_DW_SSI_RSVD_2          0xFC  // 32 bits
+
+// CTRLR0          0x00  // 16 bits, 6.2.1
+// DFS Reset Value: 0x7
+#define BIT_SHIFT_CTRLR0_DFS       0
+#define BIT_MASK_CTRLR0_DFS        0xF
+#define BIT_CTRLR0_DFS(x)(((x) & BIT_MASK_CTRLR0_DFS) << BIT_SHIFT_CTRLR0_DFS)
+#define BIT_INVC_CTRLR0_DFS (~(BIT_MASK_CTRLR0_DFS << BIT_SHIFT_CTRLR0_DFS))
+
+#define BIT_SHIFT_CTRLR0_FRF       4
+#define BIT_MASK_CTRLR0_FRF        0x3
+#define BIT_CTRLR0_FRF(x)(((x) & BIT_MASK_CTRLR0_FRF) << BIT_SHIFT_CTRLR0_FRF)
+#define BIT_INVC_CTRLR0_FRF (~(BIT_MASK_CTRLR0_FRF << BIT_SHIFT_CTRLR0_FRF))
+
+#define BIT_SHIFT_CTRLR0_SCPH      6
+#define BIT_MASK_CTRLR0_SCPH       0x1
+#define BIT_CTRLR0_SCPH(x)(((x) & BIT_MASK_CTRLR0_SCPH) << BIT_SHIFT_CTRLR0_SCPH)
+#define BIT_INVC_CTRLR0_SCPH (~(BIT_MASK_CTRLR0_SCPH << BIT_SHIFT_CTRLR0_SCPH))
+
+// CTRLR1          0x04  // 16 bits
+#define BIT_SHIFT_CTRLR1_NDF    0
+#define BIT_MASK_CTRLR1_NDF     0xFFFF
+#define BIT_CTRLR1_NDF(x)(((x) & BIT_MASK_CTRLR1_NDF) << BIT_SHIFT_CTRLR1_NDF)
+#define BIT_INVC_CTRLR1_NDF (~(BIT_MASK_CTRLR1_NDF << BIT_SHIFT_CTRLR1_NDF))
+
+// TXFLTR          0x18        // Variable Length
+#define BIT_SHIFT_TXFTLR_TFT    0
+#define BIT_MASK_TXFTLR_TFT     0x3F  // (TX_ABW-1):0
+#define BIT_TXFTLR_TFT(x)(((x) & BIT_MASK_TXFTLR_TFT) << BIT_SHIFT_TXFTLR_TFT)
+#define BIT_INVC_TXFTLR_TFT (~(BIT_MASK_TXFTLR_TFT << BIT_SHIFT_TXFTLR_TFT))
+
+// TXFLR           0x20  // see     [READ ONLY]
+#define BIT_MASK_TXFLR_TXTFL    0x7F  // (TX_ABW):0
+
+// RXFLR           0x24  // see     [READ ONLY]
+#define BIT_MASK_RXFLR_RXTFL    0x7F  // (RX_ABW):0
+
+// SR              0x28  //  7 bits [READ ONLY]
+#define BIT_SR_BUSY  BIT0
+#define BIT_SR_TFNF  BIT1
+#define BIT_SR_TFE   BIT2
+#define BIT_SR_RFNE  BIT3
+#define BIT_SR_RFF   BIT4
+#define BIT_SR_TXE   BIT5
+#define BIT_SR_DCOL  BIT6
+
+#define BIT_IMR_TXEIM  BIT0
+#define BIT_IMR_TXOIM  BIT1
+#define BIT_IMR_RXUIM  BIT2
+#define BIT_IMR_RXOIM  BIT3
+#define BIT_IMR_RXFIM  BIT4
+#define BIT_IMR_MSTIM  BIT5
+
+// ISR             0x30  //  6 bits [READ ONLY]
+#define BIT_ISR_TXEIS  BIT0
+#define BIT_ISR_TXOIS  BIT1
+#define BIT_ISR_RXUIS  BIT2
+#define BIT_ISR_RXOIS  BIT3
+#define BIT_ISR_RXFIS  BIT4
+#define BIT_ISR_MSTIS  BIT5
+
+*/
+
+BOOL
+HalMiiGmacInitRtl8195a(
+        IN VOID *Data
+        );
+
+BOOL
+HalMiiInitRtl8195a(
+        IN VOID *Data
+        );
+
+BOOL
+HalMiiGmacResetRtl8195a(
+        IN VOID *Data
+        );
+
+BOOL
+HalMiiGmacEnablePhyModeRtl8195a(
+        IN VOID *Data
+        );
+
+u32
+HalMiiGmacXmitRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacCleanTxRingRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacFillTxInfoRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacFillRxInfoRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacTxRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacRxRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacSetDefaultEthIoCmdRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalMiiGmacInitIrqRtl8195a(
+        IN VOID *Data
+        );
+
+u32
+HalMiiGmacGetInterruptStatusRtl8195a(
+		VOID
+        );
+
+VOID
+HalMiiGmacClearInterruptStatusRtl8195a(
+        u32 IsrStatus
+        );
+
+#endif
+

lib/fwlib/rtl8195a/rtl8195a_nfc.h

@@ -0,0 +1,153 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_NFC_H_
+#define _RTL8195A_NFC_H_
+
+#include "hal_api.h"
+//#include "osdep_api.h"
+#ifdef CONFIG_NFC_VERIFY
+#include "../test/nfc/rtl8195a_nfc_test.h"
+#endif
+
+#if CONFIG_NFC_NORMAL
+//===================== Register Bit Field Definition =====================
+// TODO:
+//===================== Register Address Definition =====================
+//TODO:
+//#include "osdep_api.h"
+#define N2A_Q_LENGTH 10
+#define N2ARLENGTH    4
+//#define NFCTAGLENGTH 36 // maximum 36*4=144 bytes
+#define NFCTAG_BASE  0x7F000
+#define NFCTAG_PAGESIZE 256
+#define NFCTAG_MAXPAGEIDX 16//(4*(1024/NFCTAG_PAGESIZE))
+#define A2NWCLENGTH    4
+
+#define FLASHAPPLENGTH 31
+#define FLASHAPP_BASE  0x7E000
+#define FLASH_PAGESIZE 128
+#define FLASH_MAXPAGEIDX 32//(4*(1024/FLASH_PAGESIZE))
+
+typedef struct _A2N_CATCH_W_ {
+    //u8          Vaild;
+    u8          A2NCatchRPage;
+    u32         A2NCatchWData[A2NWCLENGTH];
+}A2N_CATCH_W_QUEUE, *PA2N_CATCH_W_QUEUE;
+
+typedef struct _A2N_MAILBOX_Q_ {
+    u8          Length;
+    u8          Response;
+    u32         Content[A2NWCLENGTH+1];
+}A2N_MAILBOX_Q,*PA2N_MAILBOX_Q;
+
+typedef struct _N2A_CATCH_R_ {
+    u8          Vaild;
+    u8          N2ACatchRPage;
+    u32         N2ACatchRData[N2ARLENGTH];
+}N2A_CATCH_R_QUEUE, *PN2A_CATCH_R_QUEUE;
+
+
+typedef struct _N2A_R_ {
+    u8          Vaild;
+    u8          N2ARPage;
+}N2A_R_QUEUE, *PN2A_R_QUEUE;
+
+typedef struct _N2A_W_ {
+    u8          Vaild;
+    u8          N2AWPage;
+    u32         N2AWData;
+}N2A_W_QUEUE, *PN2A_W_QUEUE;
+
+typedef struct _NFC_ADAPTER_ {
+    u8          Function;
+    u32         NFCIsr;
+    u8          N2ABoxOpen;
+    u8          A2NSeq;
+    //u8          NFCTagFlashWIdx;
+    //u8          NFCTagFlashRIdx;
+//    u32         NFCTag[NFCTAGLENGTH];
+#if !TASK_SCHEDULER_DISABLED
+    void *       VeriSema;
+#else
+    u32         VeriSema;
+#endif  
+#ifdef PLATFORM_FREERTOS
+    void * NFCTask;
+#else
+    u32         NFCTask;
+#endif
+#ifdef CONFIG_NFC_VERIFY
+    //N2A Write Tag
+    u8          N2AWQRIdx;
+    u8          N2AWQWIdx;
+    N2A_W_QUEUE N2AWQ[N2A_Q_LENGTH];
+    //N2A Read Tag
+    u8          N2ARQRIdx;
+    u8          N2ARQWIdx;
+    N2A_R_QUEUE N2ARQ[N2A_Q_LENGTH];
+    //N2A Read Catch
+    u8          N2ARCRIdx;
+    u8          N2ARCWIdx;
+    N2A_CATCH_R_QUEUE N2ACatchR[N2A_Q_LENGTH];
+#endif
+    //A2N Write Catch
+    //u8          A2NWCRIdx;
+    //u8          A2NWCWIdx;
+    //A2N_CATCH_W_QUEUE A2NCatchW[N2A_Q_LENGTH];
+
+    //A2N Write mailbox queue
+    u8          A2NWMailBox;
+    u8          A2NWQRIdx;
+    u8          A2NWQWIdx;          
+    A2N_MAILBOX_Q A2NMAILQ[N2A_Q_LENGTH];
+
+    u8          TaskStop;
+    void        *nfc_obj;
+}NFC_ADAPTER, *PNFC_ADAPTER;
+
+typedef enum _N2A_CMD_ {
+    TAG_READ            = 0,
+    TAG_WRITE           = 1,
+    CATCH_READ_DATA     = 2,
+    NFC_R_PRESENT       = 4,
+    N2A_MAILBOX_STATE   = 5,
+    EXT_CLK_REQ         = 6,
+    MAX_N2ACMD
+} N2A_CMD, *PN2A_CMD;
+
+typedef enum _A2N_CMD_ {
+    TAG_READ_DATA       = 0,
+    CATCH_READ          = 2,
+    CATCH_WRITE         = 3,
+    A2N_MAILBOX_STATE   = 4,
+    CONFIRM_N2A_BOX_STATE = 5,
+    EXT_CLK_RSP         = 6,
+    MAX_A2NCMD
+} A2N_CMD, *PA2N_CMD;
+
+// Callback event defination
+typedef enum _NFC_HAL_EVENT_ {
+    NFC_HAL_READER_PRESENT = (1<<0),
+    NFC_HAL_READ = (1<<1),
+    NFC_HAL_WRITE = (1<<2),
+    NFC_HAL_ERR = (1<<3),
+    NFC_HAL_CACHE_RD = (1<<4)    
+}NFC_CB_EVENT, *PNFC_CB_EVENT;
+
+VOID A2NWriteCatch(IN VOID *pNFCAdapte, IN u8 N2AWPage,
+    IN u8 Length, IN u32 *WData);
+VOID A2NReadCatch(IN VOID *pNFCAdapte, IN u8   A2NRPage);
+VOID HalNFCDmemInit(IN u32 *pTagData, IN u32 TagLen);
+VOID HalNFCInit(PNFC_ADAPTER pNFCAdp);
+VOID HalNFCDeinit(PNFC_ADAPTER pNFCAdp);
+VOID HalNFCFwDownload(VOID);
+#endif  //CONFIG_NFC_NORMAL
+#endif  // #ifndef _RTL8195A_NFC_H_

lib/fwlib/rtl8195a/rtl8195a_pcm.h

@@ -0,0 +1,449 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_PCM_H_
+#define _RTL8195A_PCM_H_
+
+#include "basic_types.h"
+#include "hal_api.h"
+
+#define HAL_PCMX_READ32(PcmIndex, addr)     \
+                HAL_READ32(PCM0_REG_BASE+ (PcmIndex*PCM1_REG_OFF), addr)
+#define HAL_PCMX_WRITE32(PcmIndex, addr, value)     \
+                HAL_WRITE32((PCM0_REG_BASE+ (PcmIndex*PCM1_REG_OFF)), addr, value)
+
+#define REG_PCM_TRXBSA_OFF     0x004
+#define REG_PCM_CTL            0x000
+#define REG_PCM_CHCNR03        0x004
+#define REG_PCM_TSR03          0x008
+#define REG_PCM_BSIZE03        0x00C
+
+#define REG_PCM_CH0TXBSA       0x010
+#define REG_PCM_CH1TXBSA       0x014
+#define REG_PCM_CH2TXBSA       0x018
+#define REG_PCM_CH3TXBSA       0x01c
+#define REG_PCM_CH0RXBSA       0x020
+#define REG_PCM_CH1RXBSA       0x024
+#define REG_PCM_CH2RXBSA       0x028
+#define REG_PCM_CH3RXBSA       0x02c
+
+#define REG_PCM_IMR03          0x030
+#define REG_PCM_ISR03          0x034
+
+#define REG_PCM_CHCNR47        0x038
+#define REG_PCM_TSR47          0x03c
+#define REG_PCM_BSIZE47        0x040
+#define REG_PCM_CH4TXBSA       0x044
+#define REG_PCM_CH5TXBSA       0x048
+#define REG_PCM_CH6TXBSA       0x04c
+#define REG_PCM_CH7TXBSA       0x050
+#define REG_PCM_CH4RXBSA       0x054
+#define REG_PCM_CH5RXBSA       0x058
+#define REG_PCM_CH6RXBSA       0x05c
+#define REG_PCM_CH7RXBSA       0x060
+
+#define REG_PCM_IMR47          0x064
+#define REG_PCM_ISR47          0x068
+
+#define REG_PCM_CHCNR811       0x06c
+#define REG_PCM_TSR811         0x070
+#define REG_PCM_BSIZE811       0x074
+#define REG_PCM_CH8TXBSA       0x078
+#define REG_PCM_CH9TXBSA       0x07c
+#define REG_PCM_CH10TXBSA      0x080
+#define REG_PCM_CH11TXBSA      0x084
+#define REG_PCM_CH8RXBSA       0x088
+#define REG_PCM_CH9RXBSA       0x08c
+#define REG_PCM_CH10RXBSA      0x090
+#define REG_PCM_CH11RXBSA      0x094
+
+#define REG_PCM_IMR811         0x098
+#define REG_PCM_ISR811         0x09c
+
+#define REG_PCM_CHCNR1215      0x0a0
+#define REG_PCM_TSR1215        0x0a4
+#define REG_PCM_BSIZE1215      0x0a8
+#define REG_PCM_CH12TXBSA      0x0ac
+#define REG_PCM_CH13TXBSA      0x0b0
+#define REG_PCM_CH14TXBSA      0x0b4
+#define REG_PCM_CH15TXBSA      0x0b8
+#define REG_PCM_CH12RXBSA      0x0bc
+#define REG_PCM_CH13RXBSA      0x0c0
+#define REG_PCM_CH14RXBSA      0x0c4
+#define REG_PCM_CH15RXBSA      0x0c8
+
+#define REG_PCM_IMR1215        0x0cc
+#define REG_PCM_ISR1215        0x0d0
+
+#define REG_PCM_INTMAP         0x0d4
+#define REG_PCM_WTSR03         0x0d8
+#define REG_PCM_WTSR47         0x0dc
+
+#define REG_PCM_RX_BUFOW       0x0e0
+
+/* template 
+#define BIT_SHIFT_CTLX_ 7
+#define BIT_MASK_CTLX_  0x1
+#define BIT_CTLX_(x) (((x) & BIT_MASK_CTLX_) << BIT_SHIFT_CTLX_)
+#define BIT_INV_CTLX_ (~(BIT_MASK_CTLX_ << BIT_SHIFT_CTLX_))
+*/
+#define BIT_SHIFT_CTLX_SLAVE_SEL 8
+#define BIT_MASK_CTLX_SLAVE_SEL  0x1
+#define BIT_CTLX_SLAVE_SEL(x) (((x) & BIT_MASK_CTLX_SLAVE_SEL) << BIT_SHIFT_CTLX_SLAVE_SEL)
+#define BIT_INV_CTLX_SLAVE_SEL (~(BIT_MASK_CTLX_SLAVE_SEL << BIT_SHIFT_CTLX_SLAVE_SEL))
+
+#define BIT_SHIFT_CTLX_FSINV 9
+#define BIT_MASK_CTLX_FSINV 0x1
+#define BIT_CTLX_FSINV(x) (((x) & BIT_MASK_CTLX_FSINV) << BIT_SHIFT_CTLX_FSINV)
+#define BIT_INV_CTLX_FSINV (~(BIT_MASK_CTLX_FSINV << BIT_SHIFT_CTLX_FSINV))
+
+#define BIT_SHIFT_CTLX_PCM_EN 12
+#define BIT_MASK_CTLX_PCM_EN  0x1
+#define BIT_CTLX_PCM_EN(x) (((x) & BIT_MASK_CTLX_PCM_EN) << BIT_SHIFT_CTLX_PCM_EN)
+#define BIT_INV_CTLX_PCM_EN (~(BIT_MASK_CTLX_PCM_EN << BIT_SHIFT_CTLX_PCM_EN))
+
+#define BIT_SHIFT_CTLX_LINEARMODE 13
+#define BIT_MASK_CTLX_LINEARMODE  0x1
+#define BIT_CTLX_LINEARMODE(x) (((x) & BIT_MASK_CTLX_LINEARMODE) << BIT_SHIFT_CTLX_LINEARMODE)
+#define BIT_INV_CTLX_LINEARMODE (~(BIT_MASK_CTLX_LINEARMODE << BIT_SHIFT_CTLX_LINEARMODE))
+
+#define BIT_SHIFT_CTLX_LOOP_BACK 14
+#define BIT_MASK_CTLX_LOOP_BACK  0x1
+#define BIT_CTLX_LOOP_BACK(x) (((x) & BIT_MASK_CTLX_LOOP_BACK) << BIT_SHIFT_CTLX_LOOP_BACK)
+#define BIT_INV_CTLX_LOOP_BACK (~(BIT_MASK_CTLX_LOOP_BACK << BIT_SHIFT_CTLX_LOOP_BACK))
+
+#define BIT_SHIFT_CTLX_ENDIAN_SWAP 17
+#define BIT_MASK_CTLX_ENDIAN_SWAP  0x1
+#define BIT_CTLX_ENDIAN_SWAP(x) (((x) & BIT_MASK_CTLX_ENDIAN_SWAP) << BIT_SHIFT_CTLX_ENDIAN_SWAP)
+#define BIT_INV_CTLX_ENDIAN_SWAP (~(BIT_MASK_CTLX_ENDIAN_SWAP << BIT_SHIFT_CTLX_ENDIAN_SWAP))
+
+#define BIT_SHIFT_CHCNR03_CH0RE 24
+#define BIT_MASK_CHCNR03_CH0RE  0x1
+#define BIT_CHCNR03_CH0RE(x) (((x) & BIT_MASK_CHCNR03_CH0RE) << BIT_SHIFT_CHCNR03_CH0RE)
+#define BIT_INV_CHCNR03_CH0RE (~(BIT_MASK_CHCNR03_CH0RE << BIT_SHIFT_CHCNR03_CH0RE))
+
+#define BIT_SHIFT_CHCNR03_CH0TE 25
+#define BIT_MASK_CHCNR03_CH0TE  0x1
+#define BIT_CHCNR03_CH0TE(x) (((x) & BIT_MASK_CHCNR03_CH0TE) << BIT_SHIFT_CHCNR03_CH0TE)
+#define BIT_INV_CHCNR03_CH0TE (~(BIT_MASK_CHCNR03_CH0TE << BIT_SHIFT_CHCNR03_CH0TE))
+
+#define BIT_SHIFT_CHCNR03_CH1RE 16
+#define BIT_MASK_CHCNR03_CH1RE  0x1
+#define BIT_CHCNR03_CH1RE(x) (((x) & BIT_MASK_CHCNR03_CH1RE) << BIT_SHIFT_CHCNR03_CH1RE)
+#define BIT_INV_CHCNR03_CH1RE (~(BIT_MASK_CHCNR03_CH1RE << BIT_SHIFT_CHCNR03_CH1RE))
+
+#define BIT_SHIFT_CHCNR03_CH1TE 17
+#define BIT_MASK_CHCNR03_CH1TE  0x1
+#define BIT_CHCNR03_CH1TE(x) (((x) & BIT_MASK_CHCNR03_CH1TE) << BIT_SHIFT_CHCNR03_CH1TE)
+#define BIT_INV_CHCNR03_CH1TE (~(BIT_MASK_CHCNR03_CH1TE << BIT_SHIFT_CHCNR03_CH1TE))
+
+#define BIT_SHIFT_CHCNR03_CH2RE 8
+#define BIT_MASK_CHCNR03_CH2RE  0x1
+#define BIT_CHCNR03_CH2RE(x) (((x) & BIT_MASK_CHCNR03_CH2RE) << BIT_SHIFT_CHCNR03_CH2RE)
+#define BIT_INV_CHCNR03_CH2RE (~(BIT_MASK_CHCNR03_CH2RE << BIT_SHIFT_CHCNR03_CH2RE))
+
+#define BIT_SHIFT_CHCNR03_CH2TE 9
+#define BIT_MASK_CHCNR03_CH2TE  0x1
+#define BIT_CHCNR03_CH2TE(x) (((x) & BIT_MASK_CHCNR03_CH2TE) << BIT_SHIFT_CHCNR03_CH2TE)
+#define BIT_INV_CHCNR03_CH2TE (~(BIT_MASK_CHCNR03_CH2TE << BIT_SHIFT_CHCNR03_CH2TE))
+
+#define BIT_SHIFT_CHCNR03_CH3RE 0
+#define BIT_MASK_CHCNR03_CH3RE  0x1
+#define BIT_CHCNR03_CH3RE(x) (((x) & BIT_MASK_CHCNR03_CH3RE) << BIT_SHIFT_CHCNR03_CH3RE)
+#define BIT_INV_CHCNR03_CH3RE (~(BIT_MASK_CHCNR03_CH3RE << BIT_SHIFT_CHCNR03_CH3RE))
+
+#define BIT_SHIFT_CHCNR03_CH3TE 1
+#define BIT_MASK_CHCNR03_CH3TE  0x1
+#define BIT_CHCNR03_CH3TE(x) (((x) & BIT_MASK_CHCNR03_CH3TE) << BIT_SHIFT_CHCNR03_CH3TE)
+#define BIT_INV_CHCNR03_CH3TE (~(BIT_MASK_CHCNR03_CH3TE << BIT_SHIFT_CHCNR03_CH3TE))
+
+#define BIT_SHIFT_CHCNR03_CH0MUA 26
+#define BIT_MASK_CHCNR03_CH0MUA  0x1
+#define BIT_CHCNR03_CH0MUA(x) (((x) & BIT_MASK_CHCNR03_CH0MUA) << BIT_SHIFT_CHCNR03_CH0MUA)
+#define BIT_INV_CHCNR03_CH0MUA (~(BIT_MASK_CHCNR03_CH0MUA << BIT_SHIFT_CHCNR03_CH0MUA))
+
+#define BIT_SHIFT_CHCNR03_CH0BAND 27
+#define BIT_MASK_CHCNR03_CH0BAND  0x1
+#define BIT_CHCNR03_CH0BAND(x) (((x) & BIT_MASK_CHCNR03_CH0BAND) << BIT_SHIFT_CHCNR03_CH0BAND)
+#define BIT_INV_CHCNR03_CH0BAND (~(BIT_MASK_CHCNR03_CH0BAND << BIT_SHIFT_CHCNR03_CH0BAND))
+
+#define BIT_SHIFT_TSR03_CH0TSA 24
+#define BIT_MASK_TSR03_CH0TSA  0x1F
+#define BIT_TSR03_CH0TSA(x) (((x) & BIT_MASK_TSR03_CH0TSA) << BIT_SHIFT_TSR03_CH0TSA)
+#define BIT_INV_TSR03_CH0TSA (~(BIT_MASK_TSR03_CH0TSA << BIT_SHIFT_TSR03_CH0TSA))
+
+#define BIT_SHIFT_BSIZE03_CH0BSIZE 24
+#define BIT_MASK_BSIZE03_CH0BSIZE  0xFF
+#define BIT_BSIZE03_CH0BSIZE(x) (((x) & BIT_MASK_BSIZE03_CH0BSIZE) << BIT_SHIFT_BSIZE03_CH0BSIZE)
+#define BIT_INV_BSIZE03_CH0BSIZE (~(BIT_MASK_BSIZE03_CH0BSIZE << BIT_SHIFT_BSIZE03_CH0BSIZE))
+
+typedef struct _PCM_CTL_REG_ {
+    u32                    FCNT           :8; // Bit 0-7
+    u32                    SlaveMode      :1; // Bit 8
+    u32                    FsInv          :1; // Bit 9 
+    u32                    Rsvd10to11     :1; // Bit 10-11
+    u32                    Pcm_En         :1; // Bit 12
+    u32                    LinearMode     :1; // Bit 13
+    u32                    LoopBack       :1; // Bit 14
+    u32                    Rsvd15to16     :2; // Bit 15-16
+    u32                    EndianSwap     :1; // Bit 17
+    u32                    Rsvd18to31    :14; // Bit 18-31
+} PCM_CTL_REG, *PPCM_CTL_REG;
+
+
+
+typedef struct _PCM_CHCNR03_REG_ {
+    u32                      CH3RE     :1; // Bit 0
+    u32                      CH3TE     :1; // Bit 1
+    u32                      CH3MuA    :1; // Bit 2
+    u32                      CH3Band   :1; // Bit 3
+    u32                      CH3SlicSel:4; // Bit 4-7
+    u32                      CH2RE     :1; // Bit 8
+    u32                      CH2TE     :1; // Bit 9
+    u32                      CH2MuA    :1; // Bit 10
+    u32                      CH2Band   :1; // Bit 11
+    u32                      CH2SlicSel:4; // Bit 12-15
+    u32                      CH1RE     :1; // Bit 16
+    u32                      CH1TE     :1; // Bit 17
+    u32                      CH1MuA    :1; // Bit 18
+    u32                      CH1Band   :1; // Bit 19
+    u32                      CH1SlicSel:4; // Bit 20-23
+    u32                      CH0RE     :1; // Bit 24
+    u32                      CH0TE     :1; // Bit 25
+    u32                      CH0MuA    :1; // Bit 26
+    u32                      CH0Band   :1; // Bit 27
+    u32                      CH0SlicSel:4; // Bit 28-31
+}PCM_CHCNR03_REG, *PPCM_CHCNR03_REG;
+
+typedef struct _PCM_TSR03_REG_ {
+    u32                      CH3TSA    :5; // Bit 0-4
+    u32                      Rsvd5to7  :3; // Bit 5-7
+    u32                      CH2TSA    :5; // Bit 8-12
+    u32                      Rsvd13to15:3; // Bit 13-15
+    u32                      CH1TSA    :5; // Bit 16-20
+    u32                      Rsvd21to23:3; // Bit 21-23
+    u32                      CH0TSA    :5; // Bit 24-28
+    u32                      Rsvd29to31:3; // Bit 29-31
+}PCM_TSR03_REG, *PPCM_TSR03_REG;
+
+typedef struct _PCM_BSIZE03_REG_ {
+    u32                      CH3BSize  :8; // Bit 0-7
+    u32                      CH2BSize  :8; // Bit 8-15
+    u32                      CH1BSize  :8; // Bit 16-23
+    u32                      CH0BSize  :8; // Bit 24-31
+}PCM_BSIZE03_REG, *PPCM_BSIZE03_REG;
+
+typedef struct _PCM_ISR03_REG_ {
+    u32                      CH3RXP1UA :1; // Bit 0
+    u32                      CH3RXP0UA :1; // Bit 1
+    u32                      CH3TXP1UA :1; // Bit 2
+    u32                      CH3TXP0UA :1; // Bit 3
+    u32                      CH3RXP1IP :1; // Bit 4
+    u32                      CH3RXP0IP :1; // Bit 5
+    u32                      CH3TXP1IP :1; // Bit 6
+    u32                      CH3TXP0IP :1; // Bit 7
+    u32                      CH2RXP1UA :1; // Bit 8
+    u32                      CH2RXP0UA :1; // Bit 9
+    u32                      CH2TXP1UA :1; // Bit 10
+    u32                      CH2TXP0UA :1; // Bit 11
+    u32                      CH2RXP1IP :1; // Bit 12
+    u32                      CH2RXP0IP :1; // Bit 13
+    u32                      CH2TXP1IP :1; // Bit 14
+    u32                      CH2TXP0IP :1; // Bit 15
+    u32                      CH1RXP1UA :1; // Bit 16
+    u32                      CH1RXP0UA :1; // Bit 17
+    u32                      CH1TXP1UA :1; // Bit 18
+    u32                      CH1TXP0UA :1; // Bit 19
+    u32                      CH1RXP1IP :1; // Bit 20
+    u32                      CH1RXP0IP :1; // Bit 21
+    u32                      CH1TXP1IP :1; // Bit 22
+    u32                      CH1TXP0IP :1; // Bit 23
+    u32                      CH0RXP1UA :1; // Bit 24
+    u32                      CH0RXP0UA :1; // Bit 25
+    u32                      CH0TXP1UA :1; // Bit 26
+    u32                      CH0TXP0UA :1; // Bit 27
+    u32                      CH0RXP1IP :1; // Bit 28
+    u32                      CH0RXP0IP :1; // Bit 29
+    u32                      CH0TXP1IP :1; // Bit 30
+    u32                      CH0TXP0IP :1; // Bit 31
+}PCM_ISR03_REG, *PPCM_ISR03_REG;
+
+typedef enum _PCM_ISR015 {
+    PcmCh3P1RBU          = 0x00000001, //ch0-3
+    PcmCh3P0RBU          = 0x00000002,
+    PcmCh3P1TBU          = 0x00000004,
+    PcmCh3P0TBU          = 0x00000008,
+    PcmCh3P1ROK          = 0x00000010,
+    PcmCh3P0ROK          = 0x00000020,
+    PcmCh3P1TOK          = 0x00000040,
+    PcmCh3P0TOK          = 0x00000080,
+    PcmCh2P1RBU          = 0x00000100,
+    PcmCh2P0RBU          = 0x00000200,
+    PcmCh2P1TBU          = 0x00000400,
+    PcmCh2P0TBU          = 0x00000800,
+    PcmCh2P1ROK          = 0x00001000,
+    PcmCh2P0ROK          = 0x00002000,
+    PcmCh2P1TOK          = 0x00004000,
+    PcmCh2P0TOK          = 0x00008000,
+    PcmCh1P1RBU          = 0x00010000,
+    PcmCh1P0RBU          = 0x00020000,
+    PcmCh1P1TBU          = 0x00040000,
+    PcmCh1P0TBU          = 0x00080000,
+    PcmCh1P1ROK          = 0x00100000,
+    PcmCh1P0ROK          = 0x00200000,
+    PcmCh1P1TOK          = 0x00400000,
+    PcmCh1P0TOK          = 0x00800000,
+    PcmCh0P1RBU          = 0x01000000,
+    PcmCh0P0RBU          = 0x02000000,
+    PcmCh0P1TBU          = 0x04000000,
+    PcmCh0P0TBU          = 0x08000000,
+    PcmCh0P1ROK          = 0x10000000,
+    PcmCh0P0ROK          = 0x20000000,
+    PcmCh0P1TOK          = 0x40000000,
+    PcmCh0P0TOK          = 0x80000000,
+
+    PcmCh7P1RBU          = 0x00000001, //ch4-7
+    PcmCh7P0RBU          = 0x00000002,
+    PcmCh7P1TBU          = 0x00000004,
+    PcmCh7P0TBU          = 0x00000008,
+    PcmCh7P1ROK          = 0x00000010,
+    PcmCh7P0ROK          = 0x00000020,
+    PcmCh7P1TOK          = 0x00000040,
+    PcmCh7P0TOK          = 0x00000080,
+    PcmCh6P1RBU          = 0x00000100,
+    PcmCh6P0RBU          = 0x00000200,
+    PcmCh6P1TBU          = 0x00000400,
+    PcmCh6P0TBU          = 0x00000800,
+    PcmCh6P1ROK          = 0x00001000,
+    PcmCh6P0ROK          = 0x00002000,
+    PcmCh6P1TOK          = 0x00004000,
+    PcmCh6P0TOK          = 0x00008000,
+    PcmCh5P1RBU          = 0x00010000,
+    PcmCh5P0RBU          = 0x00020000,
+    PcmCh5P1TBU          = 0x00040000,
+    PcmCh5P0TBU          = 0x00080000,
+    PcmCh5P1ROK          = 0x00100000,
+    PcmCh5P0ROK          = 0x00200000,
+    PcmCh5P1TOK          = 0x00400000,
+    PcmCh5P0TOK          = 0x00800000,
+    PcmCh4P1RBU          = 0x01000000,
+    PcmCh4P0RBU          = 0x02000000,
+    PcmCh4P1TBU          = 0x04000000,
+    PcmCh4P0TBU          = 0x08000000,
+    PcmCh4P1ROK          = 0x10000000,
+    PcmCh4P0ROK          = 0x20000000,
+    PcmCh4P1TOK          = 0x40000000,
+    PcmCh4P0TOK          = 0x80000000,
+
+    PcmCh11P1RBU         = 0x00000001, //ch8-11
+    PcmCh11P0RBU         = 0x00000002,
+    PcmCh11P1TBU         = 0x00000004,
+    PcmCh11P0TBU         = 0x00000008,
+    PcmCh11P1ROK         = 0x00000010,
+    PcmCh11P0ROK         = 0x00000020,
+    PcmCh11P1TOK         = 0x00000040,
+    PcmCh11P0TOK         = 0x00000080,
+    PcmCh10P1RBU         = 0x00000100,
+    PcmCh10P0RBU         = 0x00000200,
+    PcmCh10P1TBU         = 0x00000400,
+    PcmCh10P0TBU         = 0x00000800,
+    PcmCh10P1ROK         = 0x00001000,
+    PcmCh10P0ROK         = 0x00002000,
+    PcmCh10P1TOK         = 0x00004000,
+    PcmCh10P0TOK         = 0x00008000,
+    PcmCh9P1RBU          = 0x00010000,
+    PcmCh9P0RBU          = 0x00020000,
+    PcmCh9P1TBU          = 0x00040000,
+    PcmCh9P0TBU          = 0x00080000,
+    PcmCh9P1ROK          = 0x00100000,
+    PcmCh9P0ROK          = 0x00200000,
+    PcmCh9P1TOK          = 0x00400000,
+    PcmCh9P0TOK          = 0x00800000,
+    PcmCh8P1RBU          = 0x01000000,
+    PcmCh8P0RBU          = 0x02000000,
+    PcmCh8P1TBU          = 0x04000000,
+    PcmCh8P0TBU          = 0x08000000,
+    PcmCh8P1ROK          = 0x10000000,
+    PcmCh8P0ROK          = 0x20000000,
+    PcmCh8P1TOK          = 0x40000000,
+    PcmCh8P0TOK          = 0x80000000,
+
+    PcmCh15P1RBU         = 0x00000001, //ch12-15
+    PcmCh15P0RBU         = 0x00000002,
+    PcmCh15P1TBU         = 0x00000004,
+    PcmCh15P0TBU         = 0x00000008,
+    PcmCh15P1ROK         = 0x00000010,
+    PcmCh15P0ROK         = 0x00000020,
+    PcmCh15P1TOK         = 0x00000040,
+    PcmCh15P0TOK         = 0x00000080,
+    PcmCh14P1RBU         = 0x00000100,
+    PcmCh14P0RBU         = 0x00000200,
+    PcmCh14P1TBU         = 0x00000400,
+    PcmCh14P0TBU         = 0x00000800,
+    PcmCh14P1ROK         = 0x00001000,
+    PcmCh14P0ROK         = 0x00002000,
+    PcmCh14P1TOK         = 0x00004000,
+    PcmCh14P0TOK         = 0x00008000,
+    PcmCh13P1RBU         = 0x00010000,
+    PcmCh13P0RBU         = 0x00020000,
+    PcmCh13P1TBU         = 0x00040000,
+    PcmCh13P0TBU         = 0x00080000,
+    PcmCh13P1ROK         = 0x00100000,
+    PcmCh13P0ROK         = 0x00200000,
+    PcmCh13P1TOK         = 0x00400000,
+    PcmCh13P0TOK         = 0x00800000,
+    PcmCh12P1RBU         = 0x01000000,
+    PcmCh12P0RBU         = 0x02000000,
+    PcmCh12P1TBU         = 0x04000000,
+    PcmCh12P0TBU         = 0x08000000,
+    PcmCh12P1ROK         = 0x10000000,
+    PcmCh12P0ROK         = 0x20000000,
+    PcmCh12P1TOK         = 0x40000000,
+    PcmCh12P0TOK         = 0x80000000
+}PCM_ISR015, *PPCM_ISR015;
+
+VOID
+HalPcmOnOffRtl8195a(
+    IN  VOID              *Data
+);
+
+BOOL
+HalPcmInitRtl8195a(
+    IN  VOID		  *Data
+);
+
+BOOL
+HalPcmSettingRtl8195a(
+    IN  VOID		  *Data
+);
+
+BOOL
+HalPcmEnRtl8195a(
+    IN  VOID		  *Data
+);
+
+BOOL
+HalPcmIsrEnAndDisRtl8195a(
+    IN  VOID		  *Data
+);
+
+BOOL
+HalPcmDumpRegRtl8195a(
+    IN  VOID		  *Data
+);
+
+BOOL
+HalPcmRtl8195a(
+    IN  VOID		  *Data
+);
+
+#endif /* _RTL8195A_PCM_H_ */
+
+

lib/fwlib/rtl8195a/rtl8195a_pwm.h

@@ -0,0 +1,37 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_PWM_H_
+#define _RTL8195A_PWM_H_
+
+extern void
+HAL_Pwm_SetDuty_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt,
+    u32 period,
+    u32 pulse_width
+);
+
+extern HAL_Status 
+HAL_Pwm_Init_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+);
+
+extern void 
+HAL_Pwm_Enable_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+);
+
+extern void 
+HAL_Pwm_Disable_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+);
+
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_sdio_host.h

@@ -0,0 +1,295 @@
+	/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_SDIO_HOST_H_
+#define _RTL8195A_SDIO_HOST_H_
+
+#include "hal_api.h"
+#include "osdep_api.h"
+
+
+
+
+#ifdef CONFIG_SDIO_HOST_VERIFY
+
+#define HAL_MMC_HOST_READ32(addr)            			HAL_READ32(SDIO_HOST_REG_BASE, addr)
+#define HAL_MMC_HOST_WRITE32(addr, value)    			HAL_WRITE32(SDIO_HOST_REG_BASE, addr, value)
+#define HAL_MMC_HOST_READ16(addr)						HAL_READ16(SDIO_HOST_REG_BASE, addr)
+#define HAL_MMC_HOST_WRITE16(addr, value)    			HAL_WRITE16(SDIO_HOST_REG_BASE, addr, value)
+#define HAL_MMC_HOST_READ8(addr)						HAL_READ8(SDIO_HOST_REG_BASE, addr)
+#define HAL_MMC_HOST_WRITE8(addr, value)    			HAL_WRITE8(SDIO_HOST_REG_BASE, addr, value)
+
+/* RTL8195A Register */
+// REG_SOC_HCI_COM_FUNC_EN (0x214)
+#define SD_DEVICE_IP_ON_BLK					BIT0
+#define SD_DEVICE_IP_OFF_BLK				BIT1
+#define SD_HOST_IP_BLK						BIT2
+
+// REG_PESOC_HCI_CLK_CTRL0 (0x240)
+#define SD_HOST_CLKEN_IN_CPU_RUN_MODE		BIT2
+
+// REG_HCI_PINMUX_CTRL (0x2A0)
+#define SD_DEVICE_MODE_PINMUX_EN			BIT0
+#define SD_HOST_MODE_PINMUX_EN				BIT1
+
+// 0x40059000
+#define SD_HOST_CARD_DETECT_CIRCUIT			BIT10
+
+
+	
+/* SD Host Register */
+#define REG_SDMA_SYS_ADDR_ARG				0x00 // 4byte
+#define REG_BLOCK_SIZE						0x04 // 2byte
+#define REG_BLOCK_COUNT						0x06 // 2byte
+#define REG_ARGUMENT1						0x08 // 4byte
+#define REG_TRANSFER_MODE					0x0C // 2byte
+#define REG_COMMAND							0x0E // 2byte
+#define REG_RESPONSE0						0x10 // 4byte
+#define REG_RESPONSE2						0x14 // 4byte
+#define REG_RESPONSE4						0x18 // 4byte
+#define REG_RESPONSE6						0x1C // 4byte
+#define REG_BUFFER_DATA_PORT				0x20 // 4byte
+#define REG_PRESENT_STATE					0x24 // 4byte
+#define REG_HOST_CONTROL1					0x28 // 1byte
+#define REG_POWER_CONTROL					0x29 // 1byte
+#define REG_BLOCK_GAP_CONTROL				0x2A // 1byte
+#define REG_WAKEUP_CONTROL					0x2B // 1byte
+#define REG_CLOCK_CONTROL					0x2C // 2byte
+#define REG_TIMEOUT_CONTROL					0x2E // 1byte
+#define REG_SW_RESET						0x2F // 1byte
+#define REG_NORMAL_INT_STATUS				0x30 // 2byte
+#define REG_ERROR_INT_STATUS				0x32 // 2byte
+#define REG_NORMAL_INT_STATUS_ENABLE		0x34 // 2byte
+#define	REG_ERROR_INT_STATUS_ENABLE			0x36 // 2byte
+#define REG_NORMAL_INT_SIGNAL_ENABLE		0x38 // 2byte
+#define REG_ERROR_INT_SIGNAL_ENABLE			0x3A // 2byte
+#define REG_CAPABILITIES					0x40 // 8byte
+#define REG_ADMA_ADDRESS					0x58 // 8byte
+
+// Transfer Mode (0x0C)
+#define BIT_DMA_EN							BIT0
+#define BIT_BLK_CNT_EN						BIT1
+#define BIT_AUTO_CMD12_EN					BIT2
+#define BIT_AUTO_CMD23_EN					BIT3
+#define BIT_READ_TRANS						BIT4
+#define BIT_MULTI_BLK						BIT5
+
+// Present State (0x24)
+#define BIT_CMD_INHIBIT_CMD					BIT0
+#define BIT_CMD_INHIBIT_DAT					BIT1
+#define BIT_CARD_INSERTED					BIT16
+#define BIT_WRITE_PROTECT_SWITCH_PIN		BIT19
+
+// Power Control (0x29)
+#define BIT_POWER_33						0xE
+#define BIT_POWER_30						0xC
+#define BIT_POWER_18						0xA
+
+// Clock Control (0x2C)
+#define BIT_INTERNAL_CLK_EN					BIT0
+#define BIT_INTERNAL_CLK_STABLE				BIT1
+#define BIT_SD_CLK_EN						BIT2
+
+// Software Reset (0x2F)
+#define BIT_SW_RESET_ALL					BIT0
+#define BIT_SW_RESET_CMD_LINE				BIT1
+#define BIT_SW_RESET_DAT_LINE				BIT2
+	
+// Norma Interrupt Status (0x30)
+#define BIT_COMMAND_COMPLETE				BIT0
+#define BIT_TRANSFER_COMPLETE				BIT1
+#define BIT_BLOCK_GAP_EVENT					BIT2
+#define BIT_DMA_INT							BIT3
+#define BIT_BUFFER_WRITE_RDY				BIT4
+#define BIT_BUFFER_READ_RDY					BIT5
+#define BIT_CARD_INSERTION					BIT6
+#define BIT_CARD_REMOVAL					BIT7
+#define BIT_CARD_INT						BIT8
+#define BIT_ERROR_INT						BIT15
+
+// Error Interrupt Status (0x32)
+#define BIT_DATA_TIME_OUT_ERROR				BIT4
+#define BIT_DATA_CRC_ERROR					BIT5
+#define BIT_ADMA_ERROR						BIT9
+
+// Capabilities (0x40)
+#define BIT_VDD_33							BIT24
+#define BIT_VDD_30							BIT25
+#define BIT_VDD_18							BIT26
+
+
+#define ENABLE								1
+#define DISABLE 							0
+
+#define ADMA_DESC_NUM						50
+
+#define BUFFER_UNIT_SIZE					512
+	
+typedef enum _MMC_HOST_TEST_FUNC_ {
+	MMC_HOST_TEST_HW_INIT,			// 0
+	MMC_HOST_TEST_CARD_INIT,		// 1
+	MMC_HOST_TEST_SEND_CMD, 		// 2
+	MMC_HOST_TEST_DEBUG,			// 3
+	MMC_HOST_TEST_SW_RESET,			// 4
+	MMC_HOST_TEST_READ_SINGLE,		// 5
+	MMC_HOST_TEST_WRITE_SINGLE,		// 6
+	MMC_HOST_TEST_READ_MULTI,		// 7
+	MMC_HOST_TEST_WRITE_MULTI,		// 8
+	MMC_HOST_TEST_SINGLE_LONGRUN,	// 9
+	MMC_HOST_TEST_MULTI_LONGRUN,	// 10
+	MMC_HOST_TEST_CARD_DETECTION,	// 11
+	MMC_HOST_TEST_WRITE_PROTECT,	// 12
+	MMC_HOST_TEST_REGISTER_RW		// 13
+}MMC_HOST_TEST_FUNC;
+	
+typedef enum _RESPONSE_TYPE_ {
+	No_Response,					// 00b
+	Response_136,					// 01b
+	Response_48,					// 10b
+	Response_48_Busy				// 11b
+}RESPONSE_TYPE;
+	
+typedef enum _COMMAND_TYPE_ {
+	Normal, 						// 00b
+	Suspend,						// 01b
+	Resume, 						// 10b
+	Abort							// 11b
+}COMMAND_TYPE;
+	
+typedef enum _DATA_PRESENT_ {
+	No_Data_Present,				// 00b
+	Data_Present,					// 01b
+}DATA_PRESENT;
+
+typedef enum _SUPPLY_VOLTAGE_ {
+	MMC_VDD_27_28	= BIT15,
+	MMC_VDD_28_29	= BIT16,
+	MMC_VDD_29_30	= BIT17,
+	MMC_VDD_30_31	= BIT18,
+	MMC_VDD_31_32	= BIT19,
+	MMC_VDD_32_33	= BIT20,
+	MMC_VDD_33_34	= BIT21,
+	MMC_VDD_34_35	= BIT22,
+	MMC_VDD_35_36	= BIT23,
+}SUPPLY_VOLTAGE;
+	
+typedef enum _COMMAND_INDEX_ {
+	GO_IDLE_STATE			= 0,
+	ALL_SEND_CID			= 2,
+	SEND_RELATIVE_ADDR		= 3,
+	SET_BUS_WIDTH			= 6,
+	SELECT_CARD				= 7,
+	SEND_IF_COND			= 8,
+	SEND_CSD				= 9,
+	STOP_TRANSMISSION		= 12,
+	SEND_STATUS				= 13,
+	READ_SINGLE_BLOCK   	= 17,
+	READ_MULTIPLE_BLOCK 	= 18,
+	WRITE_BLOCK				= 24,
+	WRITE_MULTIPLE_BLOCK	= 25,
+	SD_SEND_OP_COND 		= 41,
+	APP_CMD					= 55,
+}COMMAND_INDEX;
+
+typedef enum _TRANSFER_CONFIG_ {
+	Read_Data				= 0,
+	Write_Data				= 1,
+	Single_Block			= 0,
+	Multiple_Block			= 1,
+}TRANSFER_CONFIG;
+
+typedef enum _ERROR_STATUS_ {
+	General_Error,					// 0
+	CRC_Error,						// 1	
+	TIME_OUT_ERROR,					// 2
+	CRC_Error_NeedCMD12,			// 3
+	Transfer_OK						// 4
+}ERROR_STATUS;
+
+typedef enum _CARD_CURRENT_STATE_ {
+	IDLE_STATE,
+	READY_STATE,
+	IDENT_STATE,
+	STBY_STATE,
+	TRAN_STATE,
+	DATA_STATE,
+	RCV_STATE,
+	PRG_STATE,
+	DIS_STATE,
+	UNKNOWN_STATE
+}CARD_CURRENT_STATE;
+
+typedef struct _COMMAND_FORMAT_
+{
+	u16 Resp_Type:2;
+	u16 Rsvd0:1;
+	u16 CMD_CRC_Chk:1;
+	u16 CMD_Idx_Chk:1;
+	u16 Data_Present:1;
+	u16 CMD_Type:2;
+	u16 CMD_Idx:6;
+	u16 Rsvd1:2;
+}COMMAND_FORMAT, *PCOMMAND_FPRMAT;
+
+typedef struct _MMC_COMMAND
+{
+	COMMAND_FORMAT	Cmd_Format;
+	u32 Arg;
+}MMC_COMMAND;
+
+typedef struct _MMC_HOST_
+{
+	u32 OCR_Avail;
+	u32 Resp[4];
+	u32 CID[4];
+	u32 RCA;
+}MMC_HOST, *PMMC_HOST;
+
+typedef struct _ADMA_ATTR_
+{
+	u16 Valid:1;
+	u16 End:1;
+	u16 Int:1;
+	u16 Rsvd1:1;
+	u16 Act1:1;
+	u16 Act2:1;
+	u16 Rsvd2:10;
+}ADMA_ATTR, *PADMA_ATTR;
+// 24 bytes
+typedef struct _ADMA_DESC_TABLE_
+{
+	// 1st buffer desc
+	ADMA_ATTR Attribute1;
+	u16	Length1;
+	u32 Address1;
+	// 2nd buffer desc
+	ADMA_ATTR Attribute2;
+	u16	Length2;
+	u32 Address2;
+	// 3rd buffer desc
+	ADMA_ATTR Attribute3;
+	u16	Length3;
+	u32 Address3;
+}ADMA_DESC_TABLE, *PADMA_DESC_TABLE;
+// 1024 bytes
+typedef struct _ADMA_BUFFER_
+{
+	u8 Data1[512];  /* 1st buffer */
+	u8 Data2[512];  /* 2nd buffer */
+}ADMA_BUFFER, *PADMA_BUFFER;
+
+
+VOID
+SdHostTestApp(
+    IN  u8      *argv[]
+);
+#endif	// end of "#ifdef CONFIG_SDIO_HOST_VERIFY"
+
+#endif	/* #ifndef _RTL8195A_SDIO_HOST_H_ */

lib/fwlib/rtl8195a/rtl8195a_sdr.h

@@ -0,0 +1,379 @@
+#ifndef _RTL8195A_SDR_H
+#define _RTL8195A_SDR_H
+
+#define MS_0_CTRL_BASE            BSP_MS_I_DRAMC_0_BASE
+#define MS_0_CTRL_PHY_BASE        (BSP_MS_I_DRAMC_0_BASE)
+#define MS_0_WRAP_BASE            (MS_0_CTRL_BASE + 0x200)
+
+#define MS_1_CTRL_BASE            BSP_MS_I_DRAMC_1_BASE
+#define MS_1_CTRL_PHY_BASE        (BSP_MS_I_DRAMC_1_BASE)
+#define MS_1_WRAP_BASE            (MS_1_CTRL_BASE + 0x200)
+
+#define MS_PCTL_CCR_OFFSET        0x000
+#define MS_PCTL_DCR_OFFSET        0x004
+#define MS_PCTL_IOCR_OFFSET       0x008
+#define MS_PCTL_CSR_OFFSET        0x00c
+#define MS_PCTL_DRR_OFFSET        0x010
+#define MS_PCTL_TPR0_OFFSET       0x014
+#define MS_PCTL_TPR1_OFFSET       0x018
+#define MS_PCTL_TPR2_OFFSET       0x01c
+#define MS_PCTL_MR_OFFSET         0x020
+#define MS_PCTL_EMR1_OFFSET       0x024
+#define MS_PCTL_EMR2_OFFSET       0x028
+#define MS_PCTL_EMR3_OFFSET       0x02c
+#define MS_PCTL_CSR2_OFFSET       0x030       
+#define MS_PCTL_SRST_OFFSET       0x034      
+#define MS_PCTL_DTR2_OFFSET       0x038
+#define MS_PCTL_DTR3_OFFSET       0x03c
+#define MS_PCTL_GDLLCR_OFFSET     0x040
+#define MS_PCTL_DLLCR0_OFFSET     0x044
+#define MS_PCTL_DLLCR1_OFFSET     0x048
+#define MS_PCTL_DLLCR2_OFFSET     0x04c
+#define MS_PCTL_DLLCR3_OFFSET     0x050
+#define MS_PCTL_DLLCR4_OFFSET     0x054
+#define MS_PCTL_DLLCR5_OFFSET     0x058
+#define MS_PCTL_DLLCR6_OFFSET     0x05c
+#define MS_PCTL_DLLCR7_OFFSET     0x060
+#define MS_PCTL_DLLCR8_OFFSET     0x064
+#define MS_PCTL_DQTR0_OFFSET      0x068
+#define MS_PCTL_DQTR1_OFFSET      0x06c
+#define MS_PCTL_DQTR2_OFFSET      0x070
+#define MS_PCTL_DQTR3_OFFSET      0x074
+#define MS_PCTL_DQTR4_OFFSET      0x078
+#define MS_PCTL_DQTR5_OFFSET      0x07c
+#define MS_PCTL_DQTR6_OFFSET      0x080
+#define MS_PCTL_DQTR7_OFFSET      0x084
+#define MS_PCTL_DQSTR_OFFSET      0x088
+#define MS_PCTL_DQSBTR_OFFSET     0x08c
+#define MS_PCTL_ODTCR_OFFSET      0x090
+#define MS_PCTL_DTR0_OFFSET       0x094
+#define MS_PCTL_DTR1_OFFSET       0x098
+#define MS_PCTL_DTAR_OFFSET       0x09c
+#define MS_PCTL_ZQCR0_OFFSET      0x0a0
+#define MS_PCTL_ZQCR1_OFFSET      0x0a4
+#define MS_PCTL_ZQSR_OFFSET       0x0a8
+#define MS_PCTL_RSLR0_OFFSET      0x0ac
+#define MS_PCTL_RSLR1_OFFSET      0x0b0
+#define MS_PCTL_RSLR2_OFFSET      0x0b4
+#define MS_PCTL_RSLR3_OFFSET      0x0b8
+#define MS_PCTL_RDGR0_OFFSET      0x0bc
+#define MS_PCTL_RDGR1_OFFSET      0x0c0
+#define MS_PCTL_RDGR2_OFFSET      0x0c4
+#define MS_PCTL_RDGR3_OFFSET      0x0c8
+#define MS_PCTL_MXSL_OFFSET       0x0cc       
+
+#define MS_PCTL_BCR_OFFSET        0x0d0
+#define MS_PCTL_BALR0_OFFSET      0x0d4
+#define MS_PCTL_BALR1_OFFSET      0x0d8
+#define MS_PCTL_BDR0_OFFSET       0x0dc
+#define MS_PCTL_BDR1_OFFSET       0x0e0
+#define MS_PCTL_BBR_OFFSET        0x0e4
+#define MS_PCTL_BSR_OFFSET        0x0e8
+#define MS_PCTL_BYR_OFFSET        0x0ec
+#define MS_PCTL_BFA_OFFSET        0x0f0
+#define MS_PCTL_IDR_OFFSET        0x0f8
+#define MS_PCTL_ERR_OFFSET        0x0fc
+
+#define MS_WRAP_SCR_OFFSET        0x224
+#define MS_WRAP_QCR_OFFSET        0x230
+#define MS_WRAP_PCR_OFFSET        0x234
+#define MS_WRAP_QTR0_OFFSET       0x240
+#define MS_WRAP_QTR1_OFFSET       0x244
+#define MS_WRAP_QTR2_OFFSET       0x248
+#define MS_WRAP_QTR3_OFFSET       0x24c
+#define MS_WRAP_QTR4_OFFSET       0x250
+#define MS_WRAP_QTR5_OFFSET       0x254
+#define MS_WRAP_QTR6_OFFSET       0x258
+#define MS_WRAP_QTR7_OFFSET       0x25c
+#define MS_WRAP_QTR8_OFFSET       0x260
+#define MS_WRAP_QTR9_OFFSET       0x264
+#define MS_WRAP_QTR10_OFFSET      0x268
+#define MS_WRAP_QTR11_OFFSET      0x26c
+#define MS_WRAP_QTR12_OFFSET      0x270
+#define MS_WRAP_QTR13_OFFSET      0x274
+#define MS_WRAP_QTR14_OFFSET      0x278
+#define MS_WRAP_QTR15_OFFSET      0x27c
+
+#define MS_PHY_DLY0               0x100  
+#define MS_PHY_DLY1_RST           0x104  
+#define MS_PHY_DLY_CLK            0x108  
+#define MS_PHY_DLY_ST             0x10c  
+#define MS_PHY_DLY_NUM            0x100 
+
+#define PCTL_CCR_INIT_BFO          0
+#define PCTL_CCR_INIT_BFW          1
+#define PCTL_CCR_DTT_BFO           1
+#define PCTL_CCR_DTT_BFW           1
+#define PCTL_CCR_BTT_BFO           2
+#define PCTL_CCR_BTT_BFW           1
+#define PCTL_CCR_DPIT_BFO          3 
+#define PCTL_CCR_DPIT_BFW          1
+#define PCTL_CCR_FLUSH_FIFO_BFO    8 
+#define PCTL_CCR_FLUSH_FIFO_BFW    1
+
+#define PCTL_DCR_DDR3_BFO          0
+#define PCTL_DCR_DDR3_BFW          1
+#define PCTL_DCR_SDR_BFO           1
+#define PCTL_DCR_SDR_BFW           1
+#define PCTL_DCR_DQ32_BFO          4
+#define PCTL_DCR_DQ32_BFW          1
+#define PCTL_DCR_DFI_RATE_BFO      8
+#define PCTL_DCR_DFI_RATE_BFW      3
+
+#define PCTL_IOCR_RD_PIPE_BFO      8
+#define PCTL_IOCR_RD_PIPE_BFW      4
+#define PCTL_IOCR_TPHY_WD_BFO      12
+#define PCTL_IOCR_TPHY_WD_BFW      5
+#define PCTL_IOCR_TPHY_WL_BFO      17
+#define PCTL_IOCR_TPHY_WL_BFW      3
+#define PCTL_IOCR_TPHY_RD_EN_BFO   20
+#define PCTL_IOCR_TPHY_RD_EN_BFW   5
+
+#define PCTL_CSR_MEM_IDLE_BFO      8
+#define PCTL_CSR_MEM_IDLE_BFW      1
+#define PCTL_CSR_DT_IDLE_BFO       9 
+#define PCTL_CSR_DT_IDLE_BFW       1
+#define PCTL_CSR_BIST_IDLE_BFO     10
+#define PCTL_CSR_BIST_IDLE_BFW     1
+#define PCTL_CSR_DT_FAIL_BFO       11
+#define PCTL_CSR_DT_FAIL_BFW       1
+#define PCTL_CSR_BT_FAIL_BFO       12
+#define PCTL_CSR_BT_FAIL_BFW       1
+
+#define PCTL_DRR_TRFC_BFO          0
+#define PCTL_DRR_TRFC_BFW          7
+#define PCTL_DRR_TREF_BFO          8 
+#define PCTL_DRR_TREF_BFW          24
+#define PCTL_DRR_REF_NUM_BFO       24
+#define PCTL_DRR_REF_NUM_BFW       4
+#define PCTL_DRR_REF_DIS_BFO       28
+#define PCTL_DRR_REF_DIS_BFW       1
+
+#define PCTL_TPR0_TRP_BFO          0
+#define PCTL_TPR0_TRP_BFW          4
+#define PCTL_TPR0_TRAS_BFO         4 
+#define PCTL_TPR0_TRAS_BFW         5 
+#define PCTL_TPR0_TWR_BFO          9 
+#define PCTL_TPR0_TWR_BFW          4
+#define PCTL_TPR0_TRTP_BFO         13
+#define PCTL_TPR0_TRTP_BFW         3
+
+#define PCTL_TPR1_TRRD_BFO         0
+#define PCTL_TPR1_TRRD_BFW         4
+#define PCTL_TPR1_TRC_BFO          4 
+#define PCTL_TPR1_TRC_BFW          6 
+#define PCTL_TPR1_TRCD_BFO         10
+#define PCTL_TPR1_TRCD_BFW         4
+#define PCTL_TPR1_TCCD_BFO         14
+#define PCTL_TPR1_TCCD_BFW         3
+#define PCTL_TPR1_TWTR_BFO         17
+#define PCTL_TPR1_TWTR_BFW         3
+#define PCTL_TPR1_TRTW_BFO         20
+#define PCTL_TPR1_TRTW_BFW         4
+
+#define PCTL_TPR2_INIT_REF_NUM_BFO 0
+#define PCTL_TPR2_INIT_REF_NUM_BFW 4
+#define PCTL_TPR2_INIT_NS_EN_BFO   4 
+#define PCTL_TPR2_INIT_NS_EN_BFW   1 
+#define PCTL_TPR2_TMRD_BFO         5 
+#define PCTL_TPR2_TMRD_BFW         2
+
+#define PCTL_MR_BL_BFO             0 
+#define PCTL_MR_BL_BFW             3
+#define PCTL_MR_BT_BFO             3 
+#define PCTL_MR_BT_BFW             1
+#define PCTL_MR_CAS_BFO            4 
+#define PCTL_MR_CAS_BFW            3
+#define PCTL_MR_OP_BFO             8 
+#define PCTL_MR_OP_BFW             12
+
+#define PCTL_EMR1_ADDLAT_BFO       3 
+#define PCTL_EMR1_ADDLAT_BFW       3
+
+#define PCTL_CMD_DPIN_RSTN_BFO     0 
+#define PCTL_CMD_DPIN_RSTN_BFW     1
+#define PCTL_CMD_DPIN_CKE_BFO      1 
+#define PCTL_CMD_DPIN_CKE_BFW      1
+#define PCTL_CMD_DPIN_ODT_BFO      2 
+#define PCTL_CMD_DPIN_ODT_BFW      1 
+
+#define PCTL_BCR_STOP_BFO          0 
+#define PCTL_BCR_STOP_BFW          1
+#define PCTL_BCR_CMP_BFO           1 
+#define PCTL_BCR_CMP_BFW           1
+#define PCTL_BCR_LOOP_BFO          2 
+#define PCTL_BCR_LOOP_BFW          1 
+#define PCTL_BCR_DIS_MASK_BFO      3 
+#define PCTL_BCR_DIS_MASK_BFW      1
+#define PCTL_BCR_AT_STOP_BFO       4 
+#define PCTL_BCR_AT_STOP_BFW       1
+#define PCTL_BCR_FLUSH_CMD_BFO     8 
+#define PCTL_BCR_FLUSH_CMD_BFW     1
+#define PCTL_BCR_FLUSH_WD_BFO      9 
+#define PCTL_BCR_FLUSH_WD_BFW      1
+#define PCTL_BCR_FLUSH_RGD_BFO     10
+#define PCTL_BCR_FLUSH_RGD_BFW     1
+#define PCTL_BCR_FLUSH_RD_BFO      11
+#define PCTL_BCR_FLUSH_RD_BFW      1
+#define PCTL_BCR_FLUSH_RD_EXPC_BFO 16
+#define PCTL_BCR_FLUSH_RD_EXPC_BFW 14
+
+#define PCTL_BST_ERR_FST_TH_BFO    0 
+#define PCTL_BST_ERR_FST_TH_BFW    12
+#define PCTL_BST_ERR_CNT_BFO       16
+#define PCTL_BST_ERR_CNT_BFW       14
+
+#define PCTL_BSRAM0_CMD_LEVEL_BFO  0 
+#define PCTL_BSRAM0_CMD_LEVEL_BFW  12
+#define PCTL_BSRAM0_WD_LEVEL_BFO   16
+#define PCTL_BSRAM0_WD_LEVEL_BFW   14
+
+#define PCTL_BSRAM1_RG_LEVEL_BFO   0 
+#define PCTL_BSRAM1_RG_LEVEL_BFW   14
+#define PCTL_BSRAM1_RD_LEVEL_BFO   16
+#define PCTL_BSRAM1_RD_LEVEL_BFW   14
+
+#define WRAP_MISC_PAGE_SIZE_BFO    0 
+#define WRAP_MISC_PAGE_SIZE_BFW    4
+#define WRAP_MISC_BANK_SIZE_BFO    4 
+#define WRAP_MISC_BANK_SIZE_BFW    2
+#define WRAP_MISC_BST_SIZE_BFO     6 
+#define WRAP_MISC_BST_SIZE_BFW     2 
+#define WRAP_MISC_DDR_PARAL_BFO    8 
+#define WRAP_MISC_DDR_PARAL_BFW    1
+
+struct ms_rxi310_portmap {
+  volatile unsigned int ccr;           /* 0x000 */
+  volatile unsigned int dcr;           /* 0x004 */
+  volatile unsigned int iocr;          /* 0x008 */
+  volatile unsigned int csr;           /* 0x00c */
+  volatile unsigned int drr;           /* 0x010 */
+  volatile unsigned int tpr0;          /* 0x014 */
+  volatile unsigned int tpr1;          /* 0x018 */
+  volatile unsigned int tpr2;          /* 0x01c */
+  volatile unsigned int mr;            /* 0x020 */
+  volatile unsigned int emr1;          /* 0x024 */
+  volatile unsigned int emr2;          /* 0x028 */
+  volatile unsigned int emr3;          /* 0x02c */
+  volatile unsigned int cdpin;         /* 0x030 */
+  volatile unsigned int tdpin;         /* 0x034 */
+  volatile unsigned int dtr2;          /* 0x038 */
+  volatile unsigned int dtr3;          /* 0x03c */
+  volatile unsigned int gdllcr;        /* 0x040 */
+  volatile unsigned int dllcr0;        /* 0x044 */
+  volatile unsigned int dllcr1;        /* 0x048 */
+  volatile unsigned int dllcr2;        /* 0x04c */
+  volatile unsigned int dllcr3;        /* 0x050 */
+  volatile unsigned int dllcr4;        /* 0x054 */
+  volatile unsigned int dllcr5;        /* 0x058 */
+  volatile unsigned int dllcr6;        /* 0x05c */
+  volatile unsigned int dllcr7;        /* 0x060 */
+  volatile unsigned int dllcr8;        /* 0x064 */
+  volatile unsigned int dqtr0;         /* 0x068 */
+  volatile unsigned int dqtr1;         /* 0x06c */
+  volatile unsigned int dqtr2;         /* 0x070 */
+  volatile unsigned int dqtr3;         /* 0x074 */
+  volatile unsigned int dqtr4;         /* 0x078 */
+  volatile unsigned int dqtr5;         /* 0x07c */
+  volatile unsigned int dqtr6;         /* 0x080 */
+  volatile unsigned int dqtr7;         /* 0x084 */
+  volatile unsigned int dqstr;         /* 0x088 */
+  volatile unsigned int dqsbtr;        /* 0x08c */
+  volatile unsigned int odtcr;         /* 0x090 */
+  volatile unsigned int dtr0;          /* 0x094 */
+  volatile unsigned int dtr1;          /* 0x098 */
+  volatile unsigned int dtar;          /* 0x09c */
+  volatile unsigned int zqcr0;         /* 0x0a0 */
+  volatile unsigned int zqcr1;         /* 0x0a4 */
+  volatile unsigned int zqsr;          /* 0x0a8 */
+  volatile unsigned int rslr0;         /* 0x0ac */
+  volatile unsigned int rslr1;         /* 0x0b0 */
+  volatile unsigned int rslr2;         /* 0x0b4 */
+  volatile unsigned int rslr3;         /* 0x0b8 */
+  volatile unsigned int rdgr0;         /* 0x0bc */
+  volatile unsigned int rdgr1;         /* 0x0c0 */
+  volatile unsigned int rdgr2;         /* 0x0c4 */
+  volatile unsigned int rdgr3;         /* 0x0c8 */
+  volatile unsigned int mxsl;          /* 0x0cc */
+  volatile unsigned int bcr;           /* 0x0d0 */
+  volatile unsigned int bst;           /* 0x0d4 */
+  volatile unsigned int bsram0;        /* 0x0d8 */
+  volatile unsigned int bsram1;        /* 0x0dc */
+  volatile unsigned int bdr1;          /* 0x0e0 */
+  volatile unsigned int bbr;           /* 0x0e4 */
+  volatile unsigned int bsr;           /* 0x0e8 */
+  volatile unsigned int byr;           /* 0x0ec */
+  volatile unsigned int bfa;           /* 0x0f0 */
+  volatile unsigned int pctl_svn;      /* 0x0f4 */
+  volatile unsigned int pctl_idr;      /* 0x0f8 */
+  volatile unsigned int err;           /* 0x0fc */
+
+  // SDR_PHY CONTROL REGISTER
+  volatile unsigned int phy_dly0;      /* 0x100 */
+  volatile unsigned int phy_dly1_rst;  /* 0x104 */
+  volatile unsigned int phy_dly_clk;   /* 0x108 */
+  volatile unsigned int phy_dly_st;    /* 0x10c */
+  volatile unsigned int phy_dly_num;   /* 0x110 */
+  volatile unsigned int reserved0[68];
+
+  // WRAP CONTROL REGISTER
+  volatile unsigned int misc;          /* 0x224 */
+  volatile unsigned int cq_ver;        /* 0x228 */
+  volatile unsigned int cq_mon;        /* 0x22c */
+  volatile unsigned int wq_ver;        /* 0x230 */
+  volatile unsigned int wq_mon;        /* 0x234 */
+  volatile unsigned int rq_ver;        /* 0x240 */
+  volatile unsigned int rq_mon;        /* 0x244 */
+  volatile unsigned int reserved1[22];          
+  volatile unsigned int wwrap_idr;     /* 0x2a0 */
+  volatile unsigned int wrap_svn;      /* 0x2a4 */
+
+}; //ms_rxi310_portmap
+
+#define QFIFO_CMD_BANK_BFO             (35 - QFIFO_CMD_WRRD_BFO) // [38:35]
+#define QFIFO_CMD_BANK_BFW              4                 
+#define QFIFO_CMD_PAGE_BFO             (20 - QFIFO_CMD_WRRD_BFO) // [34:20]
+#define QFIFO_CMD_PAGE_BFW              15 
+#define QFIFO_CMD_COLU_BFO             (7  - QFIFO_CMD_WRRD_BFO) // [19: 7]
+#define QFIFO_CMD_COLU_BFW              13 // [19: 7]
+#define QFIFO_BST_LEN_BFO              (3  - QFIFO_CMD_WRRD_BFO) // [6:3]
+#define QFIFO_BST_LEN_BFW               4  // [6:3]
+#define QFIFO_CMD_WRRD_BFO              2                        // [2], remove bit[1:0]
+#define QFIFO_CMD_WRRD_BFW              1  // [2], remove bit[1:0]
+
+//====================================================//
+
+#define REG_SDR_CCR                 0x00
+#define REG_SDR_DCR                 0x04
+#define REG_SDR_IOCR                0x08
+#define REG_SDR_CSR                 0x0C
+#define REG_SDR_DRR                 0x10
+#define REG_SDR_TPR0                0x14
+#define REG_SDR_TPR1                0x18
+#define REG_SDR_TPR2                0x1C
+#define REG_SDR_MR                  0x20
+#define REG_SDR_EMR1                0x24
+#define REG_SDR_EMR2                0x28
+#define REG_SDR_EMR3                0x2C
+#define REG_SDR_CMD_DPIN            0x30
+#define REG_SDR_TIE_DPIN            0x34
+#define REG_SDR_BCR                 0xD0
+#define REG_SDR_BST                 0xD4
+#define REG_SDR_BSRAM0              0xD8
+#define REG_SDR_BSRAM1              0xDC
+#define REG_SDR_PCTL_SVN_ID         0xF4
+#define REG_SDR_PCTL_IDR            0xF8
+#define REG_SDR_DLY0                0x100
+
+#define REG_SDR_DLY1                0x104
+#define REG_SDR_DCM_RST             0x104
+
+#define REG_SDR_DLY_CLK_PHA         0x108
+#define REG_SDR_DLY_ST              0x10C
+
+#define REG_SDR_MISC                0x224
+#define REG_SDR_OCP_WRAP_IDR        0x2A0
+#define REG_SDR_OCP_WRAP_VERSION    0x2A4
+
+
+#endif  // end of "#ifndef _RTL8195A_SDR_H"

lib/fwlib/rtl8195a/rtl8195a_spi_flash.h

@@ -0,0 +1,990 @@
+#ifndef _RTL8195A_SPI_FLASH_H
+#define _RTL8195A_SPI_FLASH_H
+
+#define CPU_OPT_WIDTH 0x1F
+
+//2 REG_NOT_VALID
+
+//2 REG_SPIC_CTRLR0
+
+#define BIT_SHIFT_CK_MTIMES 23
+#define BIT_MASK_CK_MTIMES 0x1f
+#define BIT_CK_MTIMES(x)                      	(((x) & BIT_MASK_CK_MTIMES) << BIT_SHIFT_CK_MTIMES)
+#define BIT_CTRL_CK_MTIMES(x)                 	(((x) & BIT_MASK_CK_MTIMES) << BIT_SHIFT_CK_MTIMES)
+#define BIT_GET_CK_MTIMES(x)                  	(((x) >> BIT_SHIFT_CK_MTIMES) & BIT_MASK_CK_MTIMES)
+
+#define BIT_FAST_RD                           	BIT(22)
+#define BIT_SHIFT_FAST_RD                     	22
+#define BIT_MASK_FAST_RD                      	0x1
+#define BIT_CTRL_FAST_RD(x)                   	(((x) & BIT_MASK_FAST_RD) << BIT_SHIFT_FAST_RD)
+
+
+#define BIT_SHIFT_CMD_CH 20
+#define BIT_MASK_CMD_CH 0x3
+#define BIT_CMD_CH(x)                         	(((x) & BIT_MASK_CMD_CH) << BIT_SHIFT_CMD_CH)
+#define BIT_CTRL_CMD_CH(x)                    	(((x) & BIT_MASK_CMD_CH) << BIT_SHIFT_CMD_CH)
+#define BIT_GET_CMD_CH(x)                     	(((x) >> BIT_SHIFT_CMD_CH) & BIT_MASK_CMD_CH)
+
+
+#define BIT_SHIFT_DATA_CH 18
+#define BIT_MASK_DATA_CH 0x3
+#define BIT_DATA_CH(x)                        	(((x) & BIT_MASK_DATA_CH) << BIT_SHIFT_DATA_CH)
+#define BIT_CTRL_DATA_CH(x)                   	(((x) & BIT_MASK_DATA_CH) << BIT_SHIFT_DATA_CH)
+#define BIT_GET_DATA_CH(x)                    	(((x) >> BIT_SHIFT_DATA_CH) & BIT_MASK_DATA_CH)
+
+
+#define BIT_SHIFT_ADDR_CH 16
+#define BIT_MASK_ADDR_CH 0x3
+#define BIT_ADDR_CH(x)                        	(((x) & BIT_MASK_ADDR_CH) << BIT_SHIFT_ADDR_CH)
+#define BIT_CTRL_ADDR_CH(x)                   	(((x) & BIT_MASK_ADDR_CH) << BIT_SHIFT_ADDR_CH)
+#define BIT_GET_ADDR_CH(x)                    	(((x) >> BIT_SHIFT_ADDR_CH) & BIT_MASK_ADDR_CH)
+
+
+#define BIT_SHIFT_TMOD 8
+#define BIT_MASK_TMOD 0x3
+#define BIT_TMOD(x)                           	(((x) & BIT_MASK_TMOD) << BIT_SHIFT_TMOD)
+#define BIT_CTRL_TMOD(x)                      	(((x) & BIT_MASK_TMOD) << BIT_SHIFT_TMOD)
+#define BIT_GET_TMOD(x)                       	(((x) >> BIT_SHIFT_TMOD) & BIT_MASK_TMOD)
+
+#define BIT_SCPOL                             	BIT(7)
+#define BIT_SHIFT_SCPOL                       	7
+#define BIT_MASK_SCPOL                        	0x1
+#define BIT_CTRL_SCPOL(x)                     	(((x) & BIT_MASK_SCPOL) << BIT_SHIFT_SCPOL)
+
+#define BIT_SCPH                              	BIT(6)
+#define BIT_SHIFT_SCPH                        	6
+#define BIT_MASK_SCPH                         	0x1
+#define BIT_CTRL_SCPH(x)                      	(((x) & BIT_MASK_SCPH) << BIT_SHIFT_SCPH)
+
+//2 REG_SPIC_CTRLR1
+
+#define BIT_SHIFT_NDF 0
+#define BIT_MASK_NDF 0xfff
+#define BIT_NDF(x)                            	(((x) & BIT_MASK_NDF) << BIT_SHIFT_NDF)
+#define BIT_CTRL_NDF(x)                       	(((x) & BIT_MASK_NDF) << BIT_SHIFT_NDF)
+#define BIT_GET_NDF(x)                        	(((x) >> BIT_SHIFT_NDF) & BIT_MASK_NDF)
+
+
+//2 REG_SPIC_SSIENR
+#define BIT_ATCK_CMD                          	BIT(1)
+#define BIT_SHIFT_ATCK_CMD                    	1
+#define BIT_MASK_ATCK_CMD                     	0x1
+#define BIT_CTRL_ATCK_CMD(x)                  	(((x) & BIT_MASK_ATCK_CMD) << BIT_SHIFT_ATCK_CMD)
+
+#define BIT_SPIC_EN                           	BIT(0)
+#define BIT_SHIFT_SPIC_EN                     	0
+#define BIT_MASK_SPIC_EN                      	0x1
+#define BIT_CTRL_SPIC_EN(x)                   	(((x) & BIT_MASK_SPIC_EN) << BIT_SHIFT_SPIC_EN)
+
+//2 REG_SPIC_MWCR
+
+//2 REG_SPIC_SER
+#define BIT_SER                               	BIT(0)
+#define BIT_SHIFT_SER                         	0
+#define BIT_MASK_SER                          	0x1
+#define BIT_CTRL_SER(x)                       	(((x) & BIT_MASK_SER) << BIT_SHIFT_SER)
+
+//2 REG_SPIC_BAUDR
+
+#define BIT_SHIFT_SCKDV 0
+#define BIT_MASK_SCKDV 0xffff
+#define BIT_SCKDV(x)                          	(((x) & BIT_MASK_SCKDV) << BIT_SHIFT_SCKDV)
+#define BIT_CTRL_SCKDV(x)                     	(((x) & BIT_MASK_SCKDV) << BIT_SHIFT_SCKDV)
+#define BIT_GET_SCKDV(x)                      	(((x) >> BIT_SHIFT_SCKDV) & BIT_MASK_SCKDV)
+
+
+//2 REG_SPIC_TXFTLR
+
+#define BIT_SHIFT_TFT 0
+#define BIT_MASK_TFT 0x1f
+#define BIT_TFT(x)                            	(((x) & BIT_MASK_TFT) << BIT_SHIFT_TFT)
+#define BIT_CTRL_TFT(x)                       	(((x) & BIT_MASK_TFT) << BIT_SHIFT_TFT)
+#define BIT_GET_TFT(x)                        	(((x) >> BIT_SHIFT_TFT) & BIT_MASK_TFT)
+
+
+//2 REG_SPIC_RXFTLR
+
+#define BIT_SHIFT_RFT 0
+#define BIT_MASK_RFT 0x1f
+#define BIT_RFT(x)                            	(((x) & BIT_MASK_RFT) << BIT_SHIFT_RFT)
+#define BIT_CTRL_RFT(x)                       	(((x) & BIT_MASK_RFT) << BIT_SHIFT_RFT)
+#define BIT_GET_RFT(x)                        	(((x) >> BIT_SHIFT_RFT) & BIT_MASK_RFT)
+
+
+//2 REG_SPIC_TXFLR
+
+#define BIT_SHIFT_TXFL 0
+#define BIT_MASK_TXFL 0x3f
+#define BIT_TXFL(x)                           	(((x) & BIT_MASK_TXFL) << BIT_SHIFT_TXFL)
+#define BIT_CTRL_TXFL(x)                      	(((x) & BIT_MASK_TXFL) << BIT_SHIFT_TXFL)
+#define BIT_GET_TXFL(x)                       	(((x) >> BIT_SHIFT_TXFL) & BIT_MASK_TXFL)
+
+
+//2 REG_SPIC_RXFLR
+
+#define BIT_SHIFT_RXFL 0
+#define BIT_MASK_RXFL 0x3f
+#define BIT_RXFL(x)                           	(((x) & BIT_MASK_RXFL) << BIT_SHIFT_RXFL)
+#define BIT_CTRL_RXFL(x)                      	(((x) & BIT_MASK_RXFL) << BIT_SHIFT_RXFL)
+#define BIT_GET_RXFL(x)                       	(((x) >> BIT_SHIFT_RXFL) & BIT_MASK_RXFL)
+
+
+//2 REG_SPIC_SR
+#define BIT_TXE                               	BIT(5)
+#define BIT_SHIFT_TXE                         	5
+#define BIT_MASK_TXE                          	0x1
+#define BIT_CTRL_TXE(x)                       	(((x) & BIT_MASK_TXE) << BIT_SHIFT_TXE)
+
+#define BIT_RFF                               	BIT(4)
+#define BIT_SHIFT_RFF                         	4
+#define BIT_MASK_RFF                          	0x1
+#define BIT_CTRL_RFF(x)                       	(((x) & BIT_MASK_RFF) << BIT_SHIFT_RFF)
+
+#define BIT_RFNE                              	BIT(3)
+#define BIT_SHIFT_RFNE                        	3
+#define BIT_MASK_RFNE                         	0x1
+#define BIT_CTRL_RFNE(x)                      	(((x) & BIT_MASK_RFNE) << BIT_SHIFT_RFNE)
+
+#define BIT_TFE                               	BIT(2)
+#define BIT_SHIFT_TFE                         	2
+#define BIT_MASK_TFE                          	0x1
+#define BIT_CTRL_TFE(x)                       	(((x) & BIT_MASK_TFE) << BIT_SHIFT_TFE)
+
+#define BIT_TFNF                              	BIT(1)
+#define BIT_SHIFT_TFNF                        	1
+#define BIT_MASK_TFNF                         	0x1
+#define BIT_CTRL_TFNF(x)                      	(((x) & BIT_MASK_TFNF) << BIT_SHIFT_TFNF)
+
+#define BIT_BUSY                              	BIT(0)
+#define BIT_SHIFT_BUSY                        	0
+#define BIT_MASK_BUSY                         	0x1
+#define BIT_CTRL_BUSY(x)                      	(((x) & BIT_MASK_BUSY) << BIT_SHIFT_BUSY)
+
+//2 REG_SPIC_IMR
+#define BIT_TXSIM                             	BIT(9)
+#define BIT_SHIFT_TXSIM                       	9
+#define BIT_MASK_TXSIM                        	0x1
+#define BIT_CTRL_TXSIM(x)                     	(((x) & BIT_MASK_TXSIM) << BIT_SHIFT_TXSIM)
+
+#define BIT_ACEIM                             	BIT(8)
+#define BIT_SHIFT_ACEIM                       	8
+#define BIT_MASK_ACEIM                        	0x1
+#define BIT_CTRL_ACEIM(x)                     	(((x) & BIT_MASK_ACEIM) << BIT_SHIFT_ACEIM)
+
+#define BIT_BYEIM                             	BIT(7)
+#define BIT_SHIFT_BYEIM                       	7
+#define BIT_MASK_BYEIM                        	0x1
+#define BIT_CTRL_BYEIM(x)                     	(((x) & BIT_MASK_BYEIM) << BIT_SHIFT_BYEIM)
+
+#define BIT_WBEIM                             	BIT(6)
+#define BIT_SHIFT_WBEIM                       	6
+#define BIT_MASK_WBEIM                        	0x1
+#define BIT_CTRL_WBEIM(x)                     	(((x) & BIT_MASK_WBEIM) << BIT_SHIFT_WBEIM)
+
+#define BIT_FSEIM                             	BIT(5)
+#define BIT_SHIFT_FSEIM                       	5
+#define BIT_MASK_FSEIM                        	0x1
+#define BIT_CTRL_FSEIM(x)                     	(((x) & BIT_MASK_FSEIM) << BIT_SHIFT_FSEIM)
+
+#define BIT_RXFIM                             	BIT(4)
+#define BIT_SHIFT_RXFIM                       	4
+#define BIT_MASK_RXFIM                        	0x1
+#define BIT_CTRL_RXFIM(x)                     	(((x) & BIT_MASK_RXFIM) << BIT_SHIFT_RXFIM)
+
+#define BIT_RXOIM                             	BIT(3)
+#define BIT_SHIFT_RXOIM                       	3
+#define BIT_MASK_RXOIM                        	0x1
+#define BIT_CTRL_RXOIM(x)                     	(((x) & BIT_MASK_RXOIM) << BIT_SHIFT_RXOIM)
+
+#define BIT_RXUIM                             	BIT(2)
+#define BIT_SHIFT_RXUIM                       	2
+#define BIT_MASK_RXUIM                        	0x1
+#define BIT_CTRL_RXUIM(x)                     	(((x) & BIT_MASK_RXUIM) << BIT_SHIFT_RXUIM)
+
+#define BIT_TXOIM                             	BIT(1)
+#define BIT_SHIFT_TXOIM                       	1
+#define BIT_MASK_TXOIM                        	0x1
+#define BIT_CTRL_TXOIM(x)                     	(((x) & BIT_MASK_TXOIM) << BIT_SHIFT_TXOIM)
+
+#define BIT_TXEIM                             	BIT(0)
+#define BIT_SHIFT_TXEIM                       	0
+#define BIT_MASK_TXEIM                        	0x1
+#define BIT_CTRL_TXEIM(x)                     	(((x) & BIT_MASK_TXEIM) << BIT_SHIFT_TXEIM)
+
+//2 REG_SPIC_ISR
+#define BIT_TXSIS                             	BIT(9)
+#define BIT_SHIFT_TXSIS                       	9
+#define BIT_MASK_TXSIS                        	0x1
+#define BIT_CTRL_TXSIS(x)                     	(((x) & BIT_MASK_TXSIS) << BIT_SHIFT_TXSIS)
+
+#define BIT_ACEIS                             	BIT(8)
+#define BIT_SHIFT_ACEIS                       	8
+#define BIT_MASK_ACEIS                        	0x1
+#define BIT_CTRL_ACEIS(x)                     	(((x) & BIT_MASK_ACEIS) << BIT_SHIFT_ACEIS)
+
+#define BIT_BYEIS                             	BIT(7)
+#define BIT_SHIFT_BYEIS                       	7
+#define BIT_MASK_BYEIS                        	0x1
+#define BIT_CTRL_BYEIS(x)                     	(((x) & BIT_MASK_BYEIS) << BIT_SHIFT_BYEIS)
+
+#define BIT_WBEIS                             	BIT(6)
+#define BIT_SHIFT_WBEIS                       	6
+#define BIT_MASK_WBEIS                        	0x1
+#define BIT_CTRL_WBEIS(x)                     	(((x) & BIT_MASK_WBEIS) << BIT_SHIFT_WBEIS)
+
+#define BIT_FSEIS                             	BIT(5)
+#define BIT_SHIFT_FSEIS                       	5
+#define BIT_MASK_FSEIS                        	0x1
+#define BIT_CTRL_FSEIS(x)                     	(((x) & BIT_MASK_FSEIS) << BIT_SHIFT_FSEIS)
+
+#define BIT_RXFIS                             	BIT(4)
+#define BIT_SHIFT_RXFIS                       	4
+#define BIT_MASK_RXFIS                        	0x1
+#define BIT_CTRL_RXFIS(x)                     	(((x) & BIT_MASK_RXFIS) << BIT_SHIFT_RXFIS)
+
+#define BIT_RXOIS                             	BIT(3)
+#define BIT_SHIFT_RXOIS                       	3
+#define BIT_MASK_RXOIS                        	0x1
+#define BIT_CTRL_RXOIS(x)                     	(((x) & BIT_MASK_RXOIS) << BIT_SHIFT_RXOIS)
+
+#define BIT_RXUIS                             	BIT(2)
+#define BIT_SHIFT_RXUIS                       	2
+#define BIT_MASK_RXUIS                        	0x1
+#define BIT_CTRL_RXUIS(x)                     	(((x) & BIT_MASK_RXUIS) << BIT_SHIFT_RXUIS)
+
+#define BIT_TXOIS                             	BIT(1)
+#define BIT_SHIFT_TXOIS                       	1
+#define BIT_MASK_TXOIS                        	0x1
+#define BIT_CTRL_TXOIS(x)                     	(((x) & BIT_MASK_TXOIS) << BIT_SHIFT_TXOIS)
+
+#define BIT_TXEIS                             	BIT(0)
+#define BIT_SHIFT_TXEIS                       	0
+#define BIT_MASK_TXEIS                        	0x1
+#define BIT_CTRL_TXEIS(x)                     	(((x) & BIT_MASK_TXEIS) << BIT_SHIFT_TXEIS)
+
+//2 REG_SPIC_RISR
+#define BIT_ACEIR                             	BIT(8)
+#define BIT_SHIFT_ACEIR                       	8
+#define BIT_MASK_ACEIR                        	0x1
+#define BIT_CTRL_ACEIR(x)                     	(((x) & BIT_MASK_ACEIR) << BIT_SHIFT_ACEIR)
+
+#define BIT_BYEIR                             	BIT(7)
+#define BIT_SHIFT_BYEIR                       	7
+#define BIT_MASK_BYEIR                        	0x1
+#define BIT_CTRL_BYEIR(x)                     	(((x) & BIT_MASK_BYEIR) << BIT_SHIFT_BYEIR)
+
+#define BIT_WBEIR                             	BIT(6)
+#define BIT_SHIFT_WBEIR                       	6
+#define BIT_MASK_WBEIR                        	0x1
+#define BIT_CTRL_WBEIR(x)                     	(((x) & BIT_MASK_WBEIR) << BIT_SHIFT_WBEIR)
+
+#define BIT_FSEIR                             	BIT(5)
+#define BIT_SHIFT_FSEIR                       	5
+#define BIT_MASK_FSEIR                        	0x1
+#define BIT_CTRL_FSEIR(x)                     	(((x) & BIT_MASK_FSEIR) << BIT_SHIFT_FSEIR)
+
+#define BIT_RXFIR                             	BIT(4)
+#define BIT_SHIFT_RXFIR                       	4
+#define BIT_MASK_RXFIR                        	0x1
+#define BIT_CTRL_RXFIR(x)                     	(((x) & BIT_MASK_RXFIR) << BIT_SHIFT_RXFIR)
+
+#define BIT_RXOIR                             	BIT(3)
+#define BIT_SHIFT_RXOIR                       	3
+#define BIT_MASK_RXOIR                        	0x1
+#define BIT_CTRL_RXOIR(x)                     	(((x) & BIT_MASK_RXOIR) << BIT_SHIFT_RXOIR)
+
+#define BIT_RXUIR                             	BIT(2)
+#define BIT_SHIFT_RXUIR                       	2
+#define BIT_MASK_RXUIR                        	0x1
+#define BIT_CTRL_RXUIR(x)                     	(((x) & BIT_MASK_RXUIR) << BIT_SHIFT_RXUIR)
+
+#define BIT_TXOIR                             	BIT(1)
+#define BIT_SHIFT_TXOIR                       	1
+#define BIT_MASK_TXOIR                        	0x1
+#define BIT_CTRL_TXOIR(x)                     	(((x) & BIT_MASK_TXOIR) << BIT_SHIFT_TXOIR)
+
+#define BIT_TXEIR                             	BIT(0)
+#define BIT_SHIFT_TXEIR                       	0
+#define BIT_MASK_TXEIR                        	0x1
+#define BIT_CTRL_TXEIR(x)                     	(((x) & BIT_MASK_TXEIR) << BIT_SHIFT_TXEIR)
+
+//2 REG_SPIC_TXOICR
+#define BIT_TXOICR                            	BIT(0)
+#define BIT_SHIFT_TXOICR                      	0
+#define BIT_MASK_TXOICR                       	0x1
+#define BIT_CTRL_TXOICR(x)                    	(((x) & BIT_MASK_TXOICR) << BIT_SHIFT_TXOICR)
+
+//2 REG_SPIC_RXOICR
+#define BIT_RXOCIR                            	BIT(0)
+#define BIT_SHIFT_RXOCIR                      	0
+#define BIT_MASK_RXOCIR                       	0x1
+#define BIT_CTRL_RXOCIR(x)                    	(((x) & BIT_MASK_RXOCIR) << BIT_SHIFT_RXOCIR)
+
+//2 REG_SPC_RXUICR
+#define BIT_RXUICR                            	BIT(0)
+#define BIT_SHIFT_RXUICR                      	0
+#define BIT_MASK_RXUICR                       	0x1
+#define BIT_CTRL_RXUICR(x)                    	(((x) & BIT_MASK_RXUICR) << BIT_SHIFT_RXUICR)
+
+//2 REG_SPIC_MSTICR
+#define BIT_MSTICR                            	BIT(0)
+#define BIT_SHIFT_MSTICR                      	0
+#define BIT_MASK_MSTICR                       	0x1
+#define BIT_CTRL_MSTICR(x)                    	(((x) & BIT_MASK_MSTICR) << BIT_SHIFT_MSTICR)
+
+//2 REG_SPIC_ICR
+
+#define BIT_SHIFT_ICR 0
+#define BIT_MASK_ICR 0xff
+#define BIT_ICR(x)                            	(((x) & BIT_MASK_ICR) << BIT_SHIFT_ICR)
+#define BIT_CTRL_ICR(x)                       	(((x) & BIT_MASK_ICR) << BIT_SHIFT_ICR)
+#define BIT_GET_ICR(x)                        	(((x) >> BIT_SHIFT_ICR) & BIT_MASK_ICR)
+
+
+//2 REG_SPIC_DMACR
+
+//2 REG_SPIC_DMATDLR0
+
+//2 REG_SPIC_DMATDLR1
+
+//2 REG_SPIC_IDR
+
+#define BIT_SHIFT_IDCODE 0
+#define BIT_MASK_IDCODE 0xffffffffL
+#define BIT_IDCODE(x)                         	(((x) & BIT_MASK_IDCODE) << BIT_SHIFT_IDCODE)
+#define BIT_CTRL_IDCODE(x)                    	(((x) & BIT_MASK_IDCODE) << BIT_SHIFT_IDCODE)
+#define BIT_GET_IDCODE(x)                     	(((x) >> BIT_SHIFT_IDCODE) & BIT_MASK_IDCODE)
+
+
+//2 REG_SPIC_VERSION
+
+#define BIT_SHIFT_SPIC_VERSION 0
+#define BIT_MASK_SPIC_VERSION 0xffffffffL
+#define BIT_SPIC_VERSION(x)                   	(((x) & BIT_MASK_SPIC_VERSION) << BIT_SHIFT_SPIC_VERSION)
+#define BIT_CTRL_SPIC_VERSION(x)              	(((x) & BIT_MASK_SPIC_VERSION) << BIT_SHIFT_SPIC_VERSION)
+#define BIT_GET_SPIC_VERSION(x)               	(((x) >> BIT_SHIFT_SPIC_VERSION) & BIT_MASK_SPIC_VERSION)
+
+
+//2 REG_SPIC_DR0
+
+#define BIT_SHIFT_DR0 0
+#define BIT_MASK_DR0 0xffffffffL
+#define BIT_DR0(x)                            	(((x) & BIT_MASK_DR0) << BIT_SHIFT_DR0)
+#define BIT_CTRL_DR0(x)                       	(((x) & BIT_MASK_DR0) << BIT_SHIFT_DR0)
+#define BIT_GET_DR0(x)                        	(((x) >> BIT_SHIFT_DR0) & BIT_MASK_DR0)
+
+
+//2 REG_SPIC_DR1
+
+#define BIT_SHIFT_DR1 0
+#define BIT_MASK_DR1 0xffffffffL
+#define BIT_DR1(x)                            	(((x) & BIT_MASK_DR1) << BIT_SHIFT_DR1)
+#define BIT_CTRL_DR1(x)                       	(((x) & BIT_MASK_DR1) << BIT_SHIFT_DR1)
+#define BIT_GET_DR1(x)                        	(((x) >> BIT_SHIFT_DR1) & BIT_MASK_DR1)
+
+
+//2 REG_SPIC_DR2
+
+#define BIT_SHIFT_DR2 0
+#define BIT_MASK_DR2 0xffffffffL
+#define BIT_DR2(x)                            	(((x) & BIT_MASK_DR2) << BIT_SHIFT_DR2)
+#define BIT_CTRL_DR2(x)                       	(((x) & BIT_MASK_DR2) << BIT_SHIFT_DR2)
+#define BIT_GET_DR2(x)                        	(((x) >> BIT_SHIFT_DR2) & BIT_MASK_DR2)
+
+
+//2 REG_SPIC_DR3
+
+#define BIT_SHIFT_DR3 0
+#define BIT_MASK_DR3 0xffffffffL
+#define BIT_DR3(x)                            	(((x) & BIT_MASK_DR3) << BIT_SHIFT_DR3)
+#define BIT_CTRL_DR3(x)                       	(((x) & BIT_MASK_DR3) << BIT_SHIFT_DR3)
+#define BIT_GET_DR3(x)                        	(((x) >> BIT_SHIFT_DR3) & BIT_MASK_DR3)
+
+
+//2 REG_SPIC_DR4
+
+#define BIT_SHIFT_DR4 0
+#define BIT_MASK_DR4 0xffffffffL
+#define BIT_DR4(x)                            	(((x) & BIT_MASK_DR4) << BIT_SHIFT_DR4)
+#define BIT_CTRL_DR4(x)                       	(((x) & BIT_MASK_DR4) << BIT_SHIFT_DR4)
+#define BIT_GET_DR4(x)                        	(((x) >> BIT_SHIFT_DR4) & BIT_MASK_DR4)
+
+
+//2 REG_SPIC_DR5
+
+#define BIT_SHIFT_DR5 0
+#define BIT_MASK_DR5 0xffffffffL
+#define BIT_DR5(x)                            	(((x) & BIT_MASK_DR5) << BIT_SHIFT_DR5)
+#define BIT_CTRL_DR5(x)                       	(((x) & BIT_MASK_DR5) << BIT_SHIFT_DR5)
+#define BIT_GET_DR5(x)                        	(((x) >> BIT_SHIFT_DR5) & BIT_MASK_DR5)
+
+
+//2 REG_SPIC_DR6
+
+#define BIT_SHIFT_DR6 0
+#define BIT_MASK_DR6 0xffffffffL
+#define BIT_DR6(x)                            	(((x) & BIT_MASK_DR6) << BIT_SHIFT_DR6)
+#define BIT_CTRL_DR6(x)                       	(((x) & BIT_MASK_DR6) << BIT_SHIFT_DR6)
+#define BIT_GET_DR6(x)                        	(((x) >> BIT_SHIFT_DR6) & BIT_MASK_DR6)
+
+
+//2 REG_SPIC_DR7
+
+#define BIT_SHIFT_DR7 0
+#define BIT_MASK_DR7 0xffffffffL
+#define BIT_DR7(x)                            	(((x) & BIT_MASK_DR7) << BIT_SHIFT_DR7)
+#define BIT_CTRL_DR7(x)                       	(((x) & BIT_MASK_DR7) << BIT_SHIFT_DR7)
+#define BIT_GET_DR7(x)                        	(((x) >> BIT_SHIFT_DR7) & BIT_MASK_DR7)
+
+
+//2 REG_SPIC_DR8
+
+#define BIT_SHIFT_DR8 0
+#define BIT_MASK_DR8 0xffffffffL
+#define BIT_DR8(x)                            	(((x) & BIT_MASK_DR8) << BIT_SHIFT_DR8)
+#define BIT_CTRL_DR8(x)                       	(((x) & BIT_MASK_DR8) << BIT_SHIFT_DR8)
+#define BIT_GET_DR8(x)                        	(((x) >> BIT_SHIFT_DR8) & BIT_MASK_DR8)
+
+
+//2 REG_SPIC_DR9
+
+#define BIT_SHIFT_DR9 0
+#define BIT_MASK_DR9 0xffffffffL
+#define BIT_DR9(x)                            	(((x) & BIT_MASK_DR9) << BIT_SHIFT_DR9)
+#define BIT_CTRL_DR9(x)                       	(((x) & BIT_MASK_DR9) << BIT_SHIFT_DR9)
+#define BIT_GET_DR9(x)                        	(((x) >> BIT_SHIFT_DR9) & BIT_MASK_DR9)
+
+
+//2 REG_SPIC_DR10
+
+#define BIT_SHIFT_DR10 0
+#define BIT_MASK_DR10 0xffffffffL
+#define BIT_DR10(x)                           	(((x) & BIT_MASK_DR10) << BIT_SHIFT_DR10)
+#define BIT_CTRL_DR10(x)                      	(((x) & BIT_MASK_DR10) << BIT_SHIFT_DR10)
+#define BIT_GET_DR10(x)                       	(((x) >> BIT_SHIFT_DR10) & BIT_MASK_DR10)
+
+
+//2 REG_SPIC_DR11
+
+#define BIT_SHIFT_DR11 0
+#define BIT_MASK_DR11 0xffffffffL
+#define BIT_DR11(x)                           	(((x) & BIT_MASK_DR11) << BIT_SHIFT_DR11)
+#define BIT_CTRL_DR11(x)                      	(((x) & BIT_MASK_DR11) << BIT_SHIFT_DR11)
+#define BIT_GET_DR11(x)                       	(((x) >> BIT_SHIFT_DR11) & BIT_MASK_DR11)
+
+
+//2 REG_SPIC_DR12
+
+#define BIT_SHIFT_DR12 0
+#define BIT_MASK_DR12 0xffffffffL
+#define BIT_DR12(x)                           	(((x) & BIT_MASK_DR12) << BIT_SHIFT_DR12)
+#define BIT_CTRL_DR12(x)                      	(((x) & BIT_MASK_DR12) << BIT_SHIFT_DR12)
+#define BIT_GET_DR12(x)                       	(((x) >> BIT_SHIFT_DR12) & BIT_MASK_DR12)
+
+
+//2 REG_SPIC_DR13
+
+#define BIT_SHIFT_DR13 0
+#define BIT_MASK_DR13 0xffffffffL
+#define BIT_DR13(x)                           	(((x) & BIT_MASK_DR13) << BIT_SHIFT_DR13)
+#define BIT_CTRL_DR13(x)                      	(((x) & BIT_MASK_DR13) << BIT_SHIFT_DR13)
+#define BIT_GET_DR13(x)                       	(((x) >> BIT_SHIFT_DR13) & BIT_MASK_DR13)
+
+
+//2 REG_SPIC_DR14
+
+#define BIT_SHIFT_DR14 0
+#define BIT_MASK_DR14 0xffffffffL
+#define BIT_DR14(x)                           	(((x) & BIT_MASK_DR14) << BIT_SHIFT_DR14)
+#define BIT_CTRL_DR14(x)                      	(((x) & BIT_MASK_DR14) << BIT_SHIFT_DR14)
+#define BIT_GET_DR14(x)                       	(((x) >> BIT_SHIFT_DR14) & BIT_MASK_DR14)
+
+
+//2 REG_SPIC_DR15
+
+#define BIT_SHIFT_DR15 0
+#define BIT_MASK_DR15 0xffffffffL
+#define BIT_DR15(x)                           	(((x) & BIT_MASK_DR15) << BIT_SHIFT_DR15)
+#define BIT_CTRL_DR15(x)                      	(((x) & BIT_MASK_DR15) << BIT_SHIFT_DR15)
+#define BIT_GET_DR15(x)                       	(((x) >> BIT_SHIFT_DR15) & BIT_MASK_DR15)
+
+
+//2 REG_SPIC_DR16
+
+#define BIT_SHIFT_DR16 0
+#define BIT_MASK_DR16 0xffffffffL
+#define BIT_DR16(x)                           	(((x) & BIT_MASK_DR16) << BIT_SHIFT_DR16)
+#define BIT_CTRL_DR16(x)                      	(((x) & BIT_MASK_DR16) << BIT_SHIFT_DR16)
+#define BIT_GET_DR16(x)                       	(((x) >> BIT_SHIFT_DR16) & BIT_MASK_DR16)
+
+
+//2 REG_SPIC_DR17
+
+#define BIT_SHIFT_DR17 0
+#define BIT_MASK_DR17 0xffffffffL
+#define BIT_DR17(x)                           	(((x) & BIT_MASK_DR17) << BIT_SHIFT_DR17)
+#define BIT_CTRL_DR17(x)                      	(((x) & BIT_MASK_DR17) << BIT_SHIFT_DR17)
+#define BIT_GET_DR17(x)                       	(((x) >> BIT_SHIFT_DR17) & BIT_MASK_DR17)
+
+
+//2 REG_SPIC_DR18
+
+#define BIT_SHIFT_DR18 0
+#define BIT_MASK_DR18 0xffffffffL
+#define BIT_DR18(x)                           	(((x) & BIT_MASK_DR18) << BIT_SHIFT_DR18)
+#define BIT_CTRL_DR18(x)                      	(((x) & BIT_MASK_DR18) << BIT_SHIFT_DR18)
+#define BIT_GET_DR18(x)                       	(((x) >> BIT_SHIFT_DR18) & BIT_MASK_DR18)
+
+
+//2 REG_SPIC_DR19
+
+#define BIT_SHIFT_DR19 0
+#define BIT_MASK_DR19 0xffffffffL
+#define BIT_DR19(x)                           	(((x) & BIT_MASK_DR19) << BIT_SHIFT_DR19)
+#define BIT_CTRL_DR19(x)                      	(((x) & BIT_MASK_DR19) << BIT_SHIFT_DR19)
+#define BIT_GET_DR19(x)                       	(((x) >> BIT_SHIFT_DR19) & BIT_MASK_DR19)
+
+
+//2 REG_SPIC_DR20
+
+#define BIT_SHIFT_DR20 0
+#define BIT_MASK_DR20 0xffffffffL
+#define BIT_DR20(x)                           	(((x) & BIT_MASK_DR20) << BIT_SHIFT_DR20)
+#define BIT_CTRL_DR20(x)                      	(((x) & BIT_MASK_DR20) << BIT_SHIFT_DR20)
+#define BIT_GET_DR20(x)                       	(((x) >> BIT_SHIFT_DR20) & BIT_MASK_DR20)
+
+
+//2 REG_SPIC_DR21
+
+#define BIT_SHIFT_DR21 0
+#define BIT_MASK_DR21 0xffffffffL
+#define BIT_DR21(x)                           	(((x) & BIT_MASK_DR21) << BIT_SHIFT_DR21)
+#define BIT_CTRL_DR21(x)                      	(((x) & BIT_MASK_DR21) << BIT_SHIFT_DR21)
+#define BIT_GET_DR21(x)                       	(((x) >> BIT_SHIFT_DR21) & BIT_MASK_DR21)
+
+
+//2 REG_SPIC_DR22
+
+#define BIT_SHIFT_DR22 0
+#define BIT_MASK_DR22 0xffffffffL
+#define BIT_DR22(x)                           	(((x) & BIT_MASK_DR22) << BIT_SHIFT_DR22)
+#define BIT_CTRL_DR22(x)                      	(((x) & BIT_MASK_DR22) << BIT_SHIFT_DR22)
+#define BIT_GET_DR22(x)                       	(((x) >> BIT_SHIFT_DR22) & BIT_MASK_DR22)
+
+
+//2 REG_SPIC_DR23
+
+#define BIT_SHIFT_DR23 0
+#define BIT_MASK_DR23 0xffffffffL
+#define BIT_DR23(x)                           	(((x) & BIT_MASK_DR23) << BIT_SHIFT_DR23)
+#define BIT_CTRL_DR23(x)                      	(((x) & BIT_MASK_DR23) << BIT_SHIFT_DR23)
+#define BIT_GET_DR23(x)                       	(((x) >> BIT_SHIFT_DR23) & BIT_MASK_DR23)
+
+
+//2 REG_SPIC_DR24
+
+#define BIT_SHIFT_DR24 0
+#define BIT_MASK_DR24 0xffffffffL
+#define BIT_DR24(x)                           	(((x) & BIT_MASK_DR24) << BIT_SHIFT_DR24)
+#define BIT_CTRL_DR24(x)                      	(((x) & BIT_MASK_DR24) << BIT_SHIFT_DR24)
+#define BIT_GET_DR24(x)                       	(((x) >> BIT_SHIFT_DR24) & BIT_MASK_DR24)
+
+
+//2 REG_SPIC_DR25
+
+#define BIT_SHIFT_DR25 0
+#define BIT_MASK_DR25 0xffffffffL
+#define BIT_DR25(x)                           	(((x) & BIT_MASK_DR25) << BIT_SHIFT_DR25)
+#define BIT_CTRL_DR25(x)                      	(((x) & BIT_MASK_DR25) << BIT_SHIFT_DR25)
+#define BIT_GET_DR25(x)                       	(((x) >> BIT_SHIFT_DR25) & BIT_MASK_DR25)
+
+
+//2 REG_SPIC_DR26
+
+#define BIT_SHIFT_DR26 0
+#define BIT_MASK_DR26 0xffffffffL
+#define BIT_DR26(x)                           	(((x) & BIT_MASK_DR26) << BIT_SHIFT_DR26)
+#define BIT_CTRL_DR26(x)                      	(((x) & BIT_MASK_DR26) << BIT_SHIFT_DR26)
+#define BIT_GET_DR26(x)                       	(((x) >> BIT_SHIFT_DR26) & BIT_MASK_DR26)
+
+
+//2 REG_SPIC_DR27
+
+#define BIT_SHIFT_DR27 0
+#define BIT_MASK_DR27 0xffffffffL
+#define BIT_DR27(x)                           	(((x) & BIT_MASK_DR27) << BIT_SHIFT_DR27)
+#define BIT_CTRL_DR27(x)                      	(((x) & BIT_MASK_DR27) << BIT_SHIFT_DR27)
+#define BIT_GET_DR27(x)                       	(((x) >> BIT_SHIFT_DR27) & BIT_MASK_DR27)
+
+
+//2 REG_SPIC_DR28
+
+#define BIT_SHIFT_DR28 0
+#define BIT_MASK_DR28 0xffffffffL
+#define BIT_DR28(x)                           	(((x) & BIT_MASK_DR28) << BIT_SHIFT_DR28)
+#define BIT_CTRL_DR28(x)                      	(((x) & BIT_MASK_DR28) << BIT_SHIFT_DR28)
+#define BIT_GET_DR28(x)                       	(((x) >> BIT_SHIFT_DR28) & BIT_MASK_DR28)
+
+
+//2 REG_SPIC_DR29
+
+#define BIT_SHIFT_DR29 0
+#define BIT_MASK_DR29 0xffffffffL
+#define BIT_DR29(x)                           	(((x) & BIT_MASK_DR29) << BIT_SHIFT_DR29)
+#define BIT_CTRL_DR29(x)                      	(((x) & BIT_MASK_DR29) << BIT_SHIFT_DR29)
+#define BIT_GET_DR29(x)                       	(((x) >> BIT_SHIFT_DR29) & BIT_MASK_DR29)
+
+
+//2 REG_SPIC_DR30
+
+#define BIT_SHIFT_DR30 0
+#define BIT_MASK_DR30 0xffffffffL
+#define BIT_DR30(x)                           	(((x) & BIT_MASK_DR30) << BIT_SHIFT_DR30)
+#define BIT_CTRL_DR30(x)                      	(((x) & BIT_MASK_DR30) << BIT_SHIFT_DR30)
+#define BIT_GET_DR30(x)                       	(((x) >> BIT_SHIFT_DR30) & BIT_MASK_DR30)
+
+
+//2 REG_SPIC_DR31
+
+#define BIT_SHIFT_DR31 0
+#define BIT_MASK_DR31 0xffffffffL
+#define BIT_DR31(x)                           	(((x) & BIT_MASK_DR31) << BIT_SHIFT_DR31)
+#define BIT_CTRL_DR31(x)                      	(((x) & BIT_MASK_DR31) << BIT_SHIFT_DR31)
+#define BIT_GET_DR31(x)                       	(((x) >> BIT_SHIFT_DR31) & BIT_MASK_DR31)
+
+
+//2 REG_SPIC_READ_FAST_SINGLE
+
+#define BIT_SHIFT_FRD_CMD 0
+#define BIT_MASK_FRD_CMD 0xff
+#define BIT_FRD_CMD(x)                        	(((x) & BIT_MASK_FRD_CMD) << BIT_SHIFT_FRD_CMD)
+#define BIT_CTRL_FRD_CMD(x)                   	(((x) & BIT_MASK_FRD_CMD) << BIT_SHIFT_FRD_CMD)
+#define BIT_GET_FRD_CMD(x)                    	(((x) >> BIT_SHIFT_FRD_CMD) & BIT_MASK_FRD_CMD)
+
+
+//2 REG_SPIC_READ_DUAL_DATA
+
+#define BIT_SHIFT_RD_DUAL_O_CMD 0
+#define BIT_MASK_RD_DUAL_O_CMD 0xff
+#define BIT_RD_DUAL_O_CMD(x)                  	(((x) & BIT_MASK_RD_DUAL_O_CMD) << BIT_SHIFT_RD_DUAL_O_CMD)
+#define BIT_CTRL_RD_DUAL_O_CMD(x)             	(((x) & BIT_MASK_RD_DUAL_O_CMD) << BIT_SHIFT_RD_DUAL_O_CMD)
+#define BIT_GET_RD_DUAL_O_CMD(x)              	(((x) >> BIT_SHIFT_RD_DUAL_O_CMD) & BIT_MASK_RD_DUAL_O_CMD)
+
+
+//2 REG_SPIC_READ_DUAL_ADDR_DATA
+
+#define BIT_SHIFT_RD_DUAL_IO_CMD 0
+#define BIT_MASK_RD_DUAL_IO_CMD 0xff
+#define BIT_RD_DUAL_IO_CMD(x)                 	(((x) & BIT_MASK_RD_DUAL_IO_CMD) << BIT_SHIFT_RD_DUAL_IO_CMD)
+#define BIT_CTRL_RD_DUAL_IO_CMD(x)            	(((x) & BIT_MASK_RD_DUAL_IO_CMD) << BIT_SHIFT_RD_DUAL_IO_CMD)
+#define BIT_GET_RD_DUAL_IO_CMD(x)             	(((x) >> BIT_SHIFT_RD_DUAL_IO_CMD) & BIT_MASK_RD_DUAL_IO_CMD)
+
+
+//2 REG_SPIC_READ_QUAD_DATA
+
+#define BIT_SHIFT_RD_QUAD_O_CMD 0
+#define BIT_MASK_RD_QUAD_O_CMD 0xff
+#define BIT_RD_QUAD_O_CMD(x)                  	(((x) & BIT_MASK_RD_QUAD_O_CMD) << BIT_SHIFT_RD_QUAD_O_CMD)
+#define BIT_CTRL_RD_QUAD_O_CMD(x)             	(((x) & BIT_MASK_RD_QUAD_O_CMD) << BIT_SHIFT_RD_QUAD_O_CMD)
+#define BIT_GET_RD_QUAD_O_CMD(x)              	(((x) >> BIT_SHIFT_RD_QUAD_O_CMD) & BIT_MASK_RD_QUAD_O_CMD)
+
+
+//2 REG_SPIC_READ_QUAD_ADDR_DATA
+
+#define BIT_SHIFT_RD_QUAD_IO_CMD 0
+#define BIT_MASK_RD_QUAD_IO_CMD 0xff
+#define BIT_RD_QUAD_IO_CMD(x)                 	(((x) & BIT_MASK_RD_QUAD_IO_CMD) << BIT_SHIFT_RD_QUAD_IO_CMD)
+#define BIT_CTRL_RD_QUAD_IO_CMD(x)            	(((x) & BIT_MASK_RD_QUAD_IO_CMD) << BIT_SHIFT_RD_QUAD_IO_CMD)
+#define BIT_GET_RD_QUAD_IO_CMD(x)             	(((x) >> BIT_SHIFT_RD_QUAD_IO_CMD) & BIT_MASK_RD_QUAD_IO_CMD)
+
+
+//2 REG_SPIC_WRITE_SIGNLE
+
+#define BIT_SHIFT_WR_CMD 0
+#define BIT_MASK_WR_CMD 0xff
+#define BIT_WR_CMD(x)                         	(((x) & BIT_MASK_WR_CMD) << BIT_SHIFT_WR_CMD)
+#define BIT_CTRL_WR_CMD(x)                    	(((x) & BIT_MASK_WR_CMD) << BIT_SHIFT_WR_CMD)
+#define BIT_GET_WR_CMD(x)                     	(((x) >> BIT_SHIFT_WR_CMD) & BIT_MASK_WR_CMD)
+
+
+//2 REG_SPIC_WRITE_DUAL_DATA
+
+#define BIT_SHIFT_WR_DUAL_I_CMD 0
+#define BIT_MASK_WR_DUAL_I_CMD 0xff
+#define BIT_WR_DUAL_I_CMD(x)                  	(((x) & BIT_MASK_WR_DUAL_I_CMD) << BIT_SHIFT_WR_DUAL_I_CMD)
+#define BIT_CTRL_WR_DUAL_I_CMD(x)             	(((x) & BIT_MASK_WR_DUAL_I_CMD) << BIT_SHIFT_WR_DUAL_I_CMD)
+#define BIT_GET_WR_DUAL_I_CMD(x)              	(((x) >> BIT_SHIFT_WR_DUAL_I_CMD) & BIT_MASK_WR_DUAL_I_CMD)
+
+
+//2 REG_SPIC_WRITE_DUAL_ADDR_DATA
+
+#define BIT_SHIFT_WR_DUAL_II_CMD 0
+#define BIT_MASK_WR_DUAL_II_CMD 0xff
+#define BIT_WR_DUAL_II_CMD(x)                 	(((x) & BIT_MASK_WR_DUAL_II_CMD) << BIT_SHIFT_WR_DUAL_II_CMD)
+#define BIT_CTRL_WR_DUAL_II_CMD(x)            	(((x) & BIT_MASK_WR_DUAL_II_CMD) << BIT_SHIFT_WR_DUAL_II_CMD)
+#define BIT_GET_WR_DUAL_II_CMD(x)             	(((x) >> BIT_SHIFT_WR_DUAL_II_CMD) & BIT_MASK_WR_DUAL_II_CMD)
+
+
+//2 REG_SPIC_WRITE_QUAD_DATA
+
+#define BIT_SHIFT_WR_QUAD_I_CMD 0
+#define BIT_MASK_WR_QUAD_I_CMD 0xff
+#define BIT_WR_QUAD_I_CMD(x)                  	(((x) & BIT_MASK_WR_QUAD_I_CMD) << BIT_SHIFT_WR_QUAD_I_CMD)
+#define BIT_CTRL_WR_QUAD_I_CMD(x)             	(((x) & BIT_MASK_WR_QUAD_I_CMD) << BIT_SHIFT_WR_QUAD_I_CMD)
+#define BIT_GET_WR_QUAD_I_CMD(x)              	(((x) >> BIT_SHIFT_WR_QUAD_I_CMD) & BIT_MASK_WR_QUAD_I_CMD)
+
+
+//2 REG_SPIC_WRITE_QUAD_ADDR_DATA
+
+#define BIT_SHIFT_WR_QUAD_II_CMD 0
+#define BIT_MASK_WR_QUAD_II_CMD 0xff
+#define BIT_WR_QUAD_II_CMD(x)                 	(((x) & BIT_MASK_WR_QUAD_II_CMD) << BIT_SHIFT_WR_QUAD_II_CMD)
+#define BIT_CTRL_WR_QUAD_II_CMD(x)            	(((x) & BIT_MASK_WR_QUAD_II_CMD) << BIT_SHIFT_WR_QUAD_II_CMD)
+#define BIT_GET_WR_QUAD_II_CMD(x)             	(((x) >> BIT_SHIFT_WR_QUAD_II_CMD) & BIT_MASK_WR_QUAD_II_CMD)
+
+
+//2 REG_SPIC_WRITE_ENABLE
+
+#define BIT_SHIFT_WR_EN_CMD 0
+#define BIT_MASK_WR_EN_CMD 0xff
+#define BIT_WR_EN_CMD(x)                      	(((x) & BIT_MASK_WR_EN_CMD) << BIT_SHIFT_WR_EN_CMD)
+#define BIT_CTRL_WR_EN_CMD(x)                 	(((x) & BIT_MASK_WR_EN_CMD) << BIT_SHIFT_WR_EN_CMD)
+#define BIT_GET_WR_EN_CMD(x)                  	(((x) >> BIT_SHIFT_WR_EN_CMD) & BIT_MASK_WR_EN_CMD)
+
+
+//2 REG_SPIC_READ_STATUS
+
+#define BIT_SHIFT_RD_ST_CMD 0
+#define BIT_MASK_RD_ST_CMD 0xff
+#define BIT_RD_ST_CMD(x)                      	(((x) & BIT_MASK_RD_ST_CMD) << BIT_SHIFT_RD_ST_CMD)
+#define BIT_CTRL_RD_ST_CMD(x)                 	(((x) & BIT_MASK_RD_ST_CMD) << BIT_SHIFT_RD_ST_CMD)
+#define BIT_GET_RD_ST_CMD(x)                  	(((x) >> BIT_SHIFT_RD_ST_CMD) & BIT_MASK_RD_ST_CMD)
+
+
+//2 REG_SPIC_CTRLR2
+
+#define BIT_SHIFT_FIFO_ENTRY 4
+#define BIT_MASK_FIFO_ENTRY 0xf
+#define BIT_FIFO_ENTRY(x)                     	(((x) & BIT_MASK_FIFO_ENTRY) << BIT_SHIFT_FIFO_ENTRY)
+#define BIT_CTRL_FIFO_ENTRY(x)                	(((x) & BIT_MASK_FIFO_ENTRY) << BIT_SHIFT_FIFO_ENTRY)
+#define BIT_GET_FIFO_ENTRY(x)                 	(((x) >> BIT_SHIFT_FIFO_ENTRY) & BIT_MASK_FIFO_ENTRY)
+
+#define BIT_WR_SEQ                            	BIT(3)
+#define BIT_SHIFT_WR_SEQ                      	3
+#define BIT_MASK_WR_SEQ                       	0x1
+#define BIT_CTRL_WR_SEQ(x)                    	(((x) & BIT_MASK_WR_SEQ) << BIT_SHIFT_WR_SEQ)
+
+#define BIT_WPN_DNUM                          	BIT(2)
+#define BIT_SHIFT_WPN_DNUM                    	2
+#define BIT_MASK_WPN_DNUM                     	0x1
+#define BIT_CTRL_WPN_DNUM(x)                  	(((x) & BIT_MASK_WPN_DNUM) << BIT_SHIFT_WPN_DNUM)
+
+#define BIT_WPN_SET                           	BIT(1)
+#define BIT_SHIFT_WPN_SET                     	1
+#define BIT_MASK_WPN_SET                      	0x1
+#define BIT_CTRL_WPN_SET(x)                   	(((x) & BIT_MASK_WPN_SET) << BIT_SHIFT_WPN_SET)
+
+#define BIT_SO_DUM                            	BIT(0)
+#define BIT_SHIFT_SO_DUM                      	0
+#define BIT_MASK_SO_DUM                       	0x1
+#define BIT_CTRL_SO_DUM(x)                    	(((x) & BIT_MASK_SO_DUM) << BIT_SHIFT_SO_DUM)
+
+//2 REG_SPIC_FBAUDR
+
+#define BIT_SHIFT_FSCKDV 0
+#define BIT_MASK_FSCKDV 0xfff
+#define BIT_FSCKDV(x)                         	(((x) & BIT_MASK_FSCKDV) << BIT_SHIFT_FSCKDV)
+#define BIT_CTRL_FSCKDV(x)                    	(((x) & BIT_MASK_FSCKDV) << BIT_SHIFT_FSCKDV)
+#define BIT_GET_FSCKDV(x)                     	(((x) >> BIT_SHIFT_FSCKDV) & BIT_MASK_FSCKDV)
+
+
+//2 REG_SPIC_ADDR_LENGTH
+
+#define BIT_SHIFT_ADDR_PHASE_LENGTH 0
+#define BIT_MASK_ADDR_PHASE_LENGTH 0x3
+#define BIT_ADDR_PHASE_LENGTH(x)              	(((x) & BIT_MASK_ADDR_PHASE_LENGTH) << BIT_SHIFT_ADDR_PHASE_LENGTH)
+#define BIT_CTRL_ADDR_PHASE_LENGTH(x)         	(((x) & BIT_MASK_ADDR_PHASE_LENGTH) << BIT_SHIFT_ADDR_PHASE_LENGTH)
+#define BIT_GET_ADDR_PHASE_LENGTH(x)          	(((x) >> BIT_SHIFT_ADDR_PHASE_LENGTH) & BIT_MASK_ADDR_PHASE_LENGTH)
+
+
+//2 REG_SPIC_AUTO_LENGTH
+
+#define BIT_SHIFT_CS_H_WR_DUM_LEN 28
+#define BIT_MASK_CS_H_WR_DUM_LEN 0xf
+#define BIT_CS_H_WR_DUM_LEN(x)                	(((x) & BIT_MASK_CS_H_WR_DUM_LEN) << BIT_SHIFT_CS_H_WR_DUM_LEN)
+#define BIT_CTRL_CS_H_WR_DUM_LEN(x)           	(((x) & BIT_MASK_CS_H_WR_DUM_LEN) << BIT_SHIFT_CS_H_WR_DUM_LEN)
+#define BIT_GET_CS_H_WR_DUM_LEN(x)            	(((x) >> BIT_SHIFT_CS_H_WR_DUM_LEN) & BIT_MASK_CS_H_WR_DUM_LEN)
+
+
+#define BIT_SHIFT_CS_H_RD_DUM_LEN 26
+#define BIT_MASK_CS_H_RD_DUM_LEN 0x3
+#define BIT_CS_H_RD_DUM_LEN(x)                	(((x) & BIT_MASK_CS_H_RD_DUM_LEN) << BIT_SHIFT_CS_H_RD_DUM_LEN)
+#define BIT_CTRL_CS_H_RD_DUM_LEN(x)           	(((x) & BIT_MASK_CS_H_RD_DUM_LEN) << BIT_SHIFT_CS_H_RD_DUM_LEN)
+#define BIT_GET_CS_H_RD_DUM_LEN(x)            	(((x) >> BIT_SHIFT_CS_H_RD_DUM_LEN) & BIT_MASK_CS_H_RD_DUM_LEN)
+
+
+#define BIT_SHIFT_AUTO_DUM_LEN 18
+#define BIT_MASK_AUTO_DUM_LEN 0xff
+#define BIT_AUTO_DUM_LEN(x)                   	(((x) & BIT_MASK_AUTO_DUM_LEN) << BIT_SHIFT_AUTO_DUM_LEN)
+#define BIT_CTRL_AUTO_DUM_LEN(x)              	(((x) & BIT_MASK_AUTO_DUM_LEN) << BIT_SHIFT_AUTO_DUM_LEN)
+#define BIT_GET_AUTO_DUM_LEN(x)               	(((x) >> BIT_SHIFT_AUTO_DUM_LEN) & BIT_MASK_AUTO_DUM_LEN)
+
+
+#define BIT_SHIFT_AUTO_ADDR__LENGTH 16
+#define BIT_MASK_AUTO_ADDR__LENGTH 0x3
+#define BIT_AUTO_ADDR__LENGTH(x)              	(((x) & BIT_MASK_AUTO_ADDR__LENGTH) << BIT_SHIFT_AUTO_ADDR__LENGTH)
+#define BIT_CTRL_AUTO_ADDR__LENGTH(x)         	(((x) & BIT_MASK_AUTO_ADDR__LENGTH) << BIT_SHIFT_AUTO_ADDR__LENGTH)
+#define BIT_GET_AUTO_ADDR__LENGTH(x)          	(((x) >> BIT_SHIFT_AUTO_ADDR__LENGTH) & BIT_MASK_AUTO_ADDR__LENGTH)
+
+
+#define BIT_SHIFT_RD_DUMMY_LENGTH 0
+#define BIT_MASK_RD_DUMMY_LENGTH 0xffff
+#define BIT_RD_DUMMY_LENGTH(x)                	(((x) & BIT_MASK_RD_DUMMY_LENGTH) << BIT_SHIFT_RD_DUMMY_LENGTH)
+#define BIT_CTRL_RD_DUMMY_LENGTH(x)           	(((x) & BIT_MASK_RD_DUMMY_LENGTH) << BIT_SHIFT_RD_DUMMY_LENGTH)
+#define BIT_GET_RD_DUMMY_LENGTH(x)            	(((x) >> BIT_SHIFT_RD_DUMMY_LENGTH) & BIT_MASK_RD_DUMMY_LENGTH)
+
+
+//2 REG_SPIC_VALID_CMD
+#define BIT_WR_BLOCKING                       	BIT(9)
+#define BIT_SHIFT_WR_BLOCKING                 	9
+#define BIT_MASK_WR_BLOCKING                  	0x1
+#define BIT_CTRL_WR_BLOCKING(x)               	(((x) & BIT_MASK_WR_BLOCKING) << BIT_SHIFT_WR_BLOCKING)
+
+#define BIT_WR_QUAD_II                        	BIT(8)
+#define BIT_SHIFT_WR_QUAD_II                  	8
+#define BIT_MASK_WR_QUAD_II                   	0x1
+#define BIT_CTRL_WR_QUAD_II(x)                	(((x) & BIT_MASK_WR_QUAD_II) << BIT_SHIFT_WR_QUAD_II)
+
+#define BIT_WR_QUAD_I                         	BIT(7)
+#define BIT_SHIFT_WR_QUAD_I                   	7
+#define BIT_MASK_WR_QUAD_I                    	0x1
+#define BIT_CTRL_WR_QUAD_I(x)                 	(((x) & BIT_MASK_WR_QUAD_I) << BIT_SHIFT_WR_QUAD_I)
+
+#define BIT_WR_DUAL_II                        	BIT(6)
+#define BIT_SHIFT_WR_DUAL_II                  	6
+#define BIT_MASK_WR_DUAL_II                   	0x1
+#define BIT_CTRL_WR_DUAL_II(x)                	(((x) & BIT_MASK_WR_DUAL_II) << BIT_SHIFT_WR_DUAL_II)
+
+#define BIT_WR_DUAL_I                         	BIT(5)
+#define BIT_SHIFT_WR_DUAL_I                   	5
+#define BIT_MASK_WR_DUAL_I                    	0x1
+#define BIT_CTRL_WR_DUAL_I(x)                 	(((x) & BIT_MASK_WR_DUAL_I) << BIT_SHIFT_WR_DUAL_I)
+
+#define BIT_RD_QUAD_IO                        	BIT(4)
+#define BIT_SHIFT_RD_QUAD_IO                  	4
+#define BIT_MASK_RD_QUAD_IO                   	0x1
+#define BIT_CTRL_RD_QUAD_IO(x)                	(((x) & BIT_MASK_RD_QUAD_IO) << BIT_SHIFT_RD_QUAD_IO)
+
+#define BIT_RD_QUAD_O                         	BIT(3)
+#define BIT_SHIFT_RD_QUAD_O                   	3
+#define BIT_MASK_RD_QUAD_O                    	0x1
+#define BIT_CTRL_RD_QUAD_O(x)                 	(((x) & BIT_MASK_RD_QUAD_O) << BIT_SHIFT_RD_QUAD_O)
+
+#define BIT_RD_DUAL_IO                        	BIT(2)
+#define BIT_SHIFT_RD_DUAL_IO                  	2
+#define BIT_MASK_RD_DUAL_IO                   	0x1
+#define BIT_CTRL_RD_DUAL_IO(x)                	(((x) & BIT_MASK_RD_DUAL_IO) << BIT_SHIFT_RD_DUAL_IO)
+
+#define BIT_RD_DUAL_I                         	BIT(1)
+#define BIT_SHIFT_RD_DUAL_I                   	1
+#define BIT_MASK_RD_DUAL_I                    	0x1
+#define BIT_CTRL_RD_DUAL_I(x)                 	(((x) & BIT_MASK_RD_DUAL_I) << BIT_SHIFT_RD_DUAL_I)
+
+#define BIT_FRD_SINGEL                        	BIT(0)
+#define BIT_SHIFT_FRD_SINGEL                  	0
+#define BIT_MASK_FRD_SINGEL                   	0x1
+#define BIT_CTRL_FRD_SINGEL(x)                	(((x) & BIT_MASK_FRD_SINGEL) << BIT_SHIFT_FRD_SINGEL)
+
+//2 REG_SPIC_FLASE_SIZE
+
+#define BIT_SHIFT_FLASE_SIZE 0
+#define BIT_MASK_FLASE_SIZE 0xf
+#define BIT_FLASE_SIZE(x)                     	(((x) & BIT_MASK_FLASE_SIZE) << BIT_SHIFT_FLASE_SIZE)
+#define BIT_CTRL_FLASE_SIZE(x)                	(((x) & BIT_MASK_FLASE_SIZE) << BIT_SHIFT_FLASE_SIZE)
+#define BIT_GET_FLASE_SIZE(x)                 	(((x) >> BIT_SHIFT_FLASE_SIZE) & BIT_MASK_FLASE_SIZE)
+
+
+//2 REG_SPIC_FLUSH_FIFO
+#define BIT_FLUSH_FIFO                        	BIT(0)
+#define BIT_SHIFT_FLUSH_FIFO                  	0
+#define BIT_MASK_FLUSH_FIFO                   	0x1
+#define BIT_CTRL_FLUSH_FIFO(x)                	(((x) & BIT_MASK_FLUSH_FIFO) << BIT_SHIFT_FLUSH_FIFO)
+
+//=================== Register Address Definition ============================//
+#define REG_SPIC_CTRLR0 0x0000//O
+#define REG_SPIC_CTRLR1 0x0004//O
+#define REG_SPIC_SSIENR 0x0008//O
+#define REG_SPIC_MWCR 0x000C
+#define REG_SPIC_SER 0x0010//O
+#define REG_SPIC_BAUDR 0x0014//O
+#define REG_SPIC_TXFTLR 0x0018
+#define REG_SPIC_RXFTLR 0x001C//O
+#define REG_SPIC_TXFLR 0x0020//O
+#define REG_SPIC_RXFLR 0x0024
+#define REG_SPIC_SR 0x0028
+#define REG_SPIC_IMR 0x002C//O
+#define REG_SPIC_ISR 0x0030
+#define REG_SPIC_RISR 0x0034
+#define REG_SPIC_TXOICR 0x0038
+#define REG_SPIC_RXOICR 0x003C
+#define REG_SPC_RXUICR 0x0040
+#define REG_SPIC_MSTICR 0x0044
+#define REG_SPIC_ICR 0x0048
+#define REG_SPIC_DMACR 0x004C
+#define REG_SPIC_DMATDLR0 0x0050
+#define REG_SPIC_DMATDLR1 0x0054
+#define REG_SPIC_IDR 0x0058
+#define REG_SPIC_VERSION 0x005C
+#define REG_SPIC_DR0 0x0060
+#define REG_SPIC_DR1 0x0064
+#define REG_SPIC_DR2 0x0068
+#define REG_SPIC_DR3 0x006C
+#define REG_SPIC_DR4 0x0070
+#define REG_SPIC_DR5 0x0074
+#define REG_SPIC_DR6 0x0078
+#define REG_SPIC_DR7 0x007C
+#define REG_SPIC_DR8 0x0080
+#define REG_SPIC_DR9 0x0084
+#define REG_SPIC_DR10 0x0088
+#define REG_SPIC_DR11 0x008C
+#define REG_SPIC_DR12 0x0090
+#define REG_SPIC_DR13 0x0094
+#define REG_SPIC_DR14 0x0098
+#define REG_SPIC_DR15 0x009C
+#define REG_SPIC_DR16 0x00A0
+#define REG_SPIC_DR17 0x00A4
+#define REG_SPIC_DR18 0x00A8
+#define REG_SPIC_DR19 0x00AC
+#define REG_SPIC_DR20 0x00B0
+#define REG_SPIC_DR21 0x00B4
+#define REG_SPIC_DR22 0x00B8
+#define REG_SPIC_DR23 0x00BC
+#define REG_SPIC_DR24 0x00C0
+#define REG_SPIC_DR25 0x00C4
+#define REG_SPIC_DR26 0x00C8
+#define REG_SPIC_DR27 0x00CC
+#define REG_SPIC_DR28 0x00D0
+#define REG_SPIC_DR29 0x00D4
+#define REG_SPIC_DR30 0x00D8
+#define REG_SPIC_DR31 0x00DC
+#define REG_SPIC_READ_FAST_SINGLE 0x00E0//O
+#define REG_SPIC_READ_DUAL_DATA 0x00E4//O
+#define REG_SPIC_READ_DUAL_ADDR_DATA 0x00E8//O
+#define REG_SPIC_READ_QUAD_DATA 0x00EC//O
+#define REG_SPIC_READ_QUAD_ADDR_DATA 0x00F0//O
+#define REG_SPIC_WRITE_SIGNLE 0x00F4//O
+#define REG_SPIC_WRITE_DUAL_DATA 0x00F8//O
+#define REG_SPIC_WRITE_DUAL_ADDR_DATA 0x00FC//O
+#define REG_SPIC_WRITE_QUAD_DATA 0x0100//O
+#define REG_SPIC_WRITE_QUAD_ADDR_DATA 0x0104//O
+#define REG_SPIC_WRITE_ENABLE 0x0108//O
+#define REG_SPIC_READ_STATUS 0x010C//O
+#define REG_SPIC_CTRLR2 0x0110//O
+#define REG_SPIC_FBAUDR 0x0114//O
+#define REG_SPIC_ADDR_LENGTH 0x0118//O
+#define REG_SPIC_AUTO_LENGTH 0x011C//O
+#define REG_SPIC_VALID_CMD 0x0120//O
+#define REG_SPIC_FLASE_SIZE 0x0124//O
+#define REG_SPIC_FLUSH_FIFO 0x0128//O
+
+#endif  // end of "#ifndef _RTL8195A_SPI_FLASH_H"

lib/fwlib/rtl8195a/rtl8195a_ssi.h

@@ -0,0 +1,498 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_SSI_H_
+#define _RTL8195A_SSI_H_
+
+#define SSI_DUMMY_DATA      0x00        // for master mode, we need to push a Dummy data to TX FIFO for read
+
+#define SSI_CLK_SPI1        (PLATFORM_CLOCK/2)
+#define SSI_CLK_SPI0_2      (PLATFORM_CLOCK/4)
+
+/* Parameters of DW_apb_ssi for RTL8195A */
+#define SSI_TX_FIFO_DEPTH  64
+#define TX_ABW              6  // 1-8, log2(SSI_TX_FIFO_DEPTH)
+#define SSI_RX_FIFO_DEPTH  64
+#define RX_ABW              6  // 1-8, log2(SSI_RX_FIFO_DEPTH)
+
+#define SSI0_REG_BASE  0x40042000
+#define SSI1_REG_BASE  0x40042400
+#define SSI2_REG_BASE  0x40042800
+
+/* Memory Map of DW_apb_ssi */
+#define REG_DW_SSI_CTRLR0          0x00  // 16 bits
+#define REG_DW_SSI_CTRLR1          0x04  // 16 bits
+#define REG_DW_SSI_SSIENR          0x08  //  1 bit
+#define REG_DW_SSI_MWCR            0x0C  //  3 bits
+#define REG_DW_SSI_SER             0x10  //
+#define REG_DW_SSI_BAUDR           0x14  // 16 bits
+#define REG_DW_SSI_TXFTLR          0x18  //  TX_ABW
+#define REG_DW_SSI_RXFTLR          0x1C  //  RX_ABW
+#define REG_DW_SSI_TXFLR           0x20  //
+#define REG_DW_SSI_RXFLR           0x24  //
+#define REG_DW_SSI_SR              0x28  //  7 bits
+#define REG_DW_SSI_IMR             0x2C  //
+#define REG_DW_SSI_ISR             0x30  //  6 bits
+#define REG_DW_SSI_RISR            0x34  //  6 bits
+#define REG_DW_SSI_TXOICR          0x38  //  1 bits
+#define REG_DW_SSI_RXOICR          0x3C  //  1 bits
+#define REG_DW_SSI_RXUICR          0x40  //  1 bits
+#define REG_DW_SSI_MSTICR          0x44  //  1 bits
+#define REG_DW_SSI_ICR             0x48  //  1 bits
+#define REG_DW_SSI_DMACR           0x4C  //  2 bits
+#define REG_DW_SSI_DMATDLR         0x50  //  TX_ABW
+#define REG_DW_SSI_DMARDLR         0x54  //  RX_ABW
+#define REG_DW_SSI_IDR             0x58  // 32 bits
+#define REG_DW_SSI_COMP_VERSION    0x5C  // 32 bits
+#define REG_DW_SSI_DR              0x60  // 16 bits 0x60-0xEC
+#define REG_DW_SSI_RX_SAMPLE_DLY   0xF0  //  8 bits
+#define REG_DW_SSI_RSVD_0          0xF4  // 32 bits
+#define REG_DW_SSI_RSVD_1          0xF8  // 32 bits
+#define REG_DW_SSI_RSVD_2          0xFC  // 32 bits
+
+// CTRLR0          0x00  // 16 bits, 6.2.1
+// DFS Reset Value: 0x7
+#define BIT_SHIFT_CTRLR0_DFS       0
+#define BIT_MASK_CTRLR0_DFS        0xF
+#define BIT_CTRLR0_DFS(x)(((x) & BIT_MASK_CTRLR0_DFS) << BIT_SHIFT_CTRLR0_DFS)
+#define BIT_INVC_CTRLR0_DFS (~(BIT_MASK_CTRLR0_DFS << BIT_SHIFT_CTRLR0_DFS))
+
+#define BIT_SHIFT_CTRLR0_FRF       4
+#define BIT_MASK_CTRLR0_FRF        0x3
+#define BIT_CTRLR0_FRF(x)(((x) & BIT_MASK_CTRLR0_FRF) << BIT_SHIFT_CTRLR0_FRF)
+#define BIT_INVC_CTRLR0_FRF (~(BIT_MASK_CTRLR0_FRF << BIT_SHIFT_CTRLR0_FRF))
+
+#define BIT_SHIFT_CTRLR0_SCPH      6
+#define BIT_MASK_CTRLR0_SCPH       0x1
+#define BIT_CTRLR0_SCPH(x)(((x) & BIT_MASK_CTRLR0_SCPH) << BIT_SHIFT_CTRLR0_SCPH)
+#define BIT_INVC_CTRLR0_SCPH (~(BIT_MASK_CTRLR0_SCPH << BIT_SHIFT_CTRLR0_SCPH))
+
+#define BIT_SHIFT_CTRLR0_SCPOL     7
+#define BIT_MASK_CTRLR0_SCPOL      0x1
+#define BIT_CTRLR0_SCPOL(x)(((x) & BIT_MASK_CTRLR0_SCPOL) << BIT_SHIFT_CTRLR0_SCPOL)
+#define BIT_INVC_CTRLR0_SCPOL (~(BIT_MASK_CTRLR0_SCPOL << BIT_SHIFT_CTRLR0_SCPOL))
+
+#define BIT_SHIFT_CTRLR0_TMOD      8
+#define BIT_MASK_CTRLR0_TMOD       0x3
+#define BIT_CTRLR0_TMOD(x)(((x) & BIT_MASK_CTRLR0_TMOD) << BIT_SHIFT_CTRLR0_TMOD)
+#define BIT_INVC_CTRLR0_TMOD (~(BIT_MASK_CTRLR0_TMOD << BIT_SHIFT_CTRLR0_TMOD))
+
+#define BIT_SHIFT_CTRLR0_SLV_OE    10
+#define BIT_MASK_CTRLR0_SLV_OE     0x1
+#define BIT_CTRLR0_SLV_OE(x)(((x) & BIT_MASK_CTRLR0_SLV_OE) << BIT_SHIFT_CTRLR0_SLV_OE)
+#define BIT_INVC_CTRLR0_SLV_OE (~(BIT_MASK_CTRLR0_SLV_OE << BIT_SHIFT_CTRLR0_SLV_OE))
+
+#define BIT_SHIFT_CTRLR0_SRL       11
+#define BIT_MASK_CTRLR0_SRL        0x1
+#define BIT_CTRLR0_SRL(x)(((x) & BIT_MASK_CTRLR0_SRL) << BIT_SHIFT_CTRLR0_SRL)
+#define BIT_INVC_CTRLR0_SRL (~(BIT_MASK_CTRLR0_SRL << BIT_SHIFT_CTRLR0_SRL))
+
+#define BIT_SHIFT_CTRLR0_CFS       12
+#define BIT_MASK_CTRLR0_CFS        0xF
+#define BIT_CTRLR0_CFS(x)(((x) & BIT_MASK_CTRLR0_CFS) << BIT_SHIFT_CTRLR0_CFS)
+#define BIT_INVC_CTRLR0_CFS (~(BIT_MASK_CTRLR0_CFS << BIT_SHIFT_CTRLR0_CFS))
+
+// CTRLR1          0x04  // 16 bits
+#define BIT_SHIFT_CTRLR1_NDF    0
+#define BIT_MASK_CTRLR1_NDF     0xFFFF
+#define BIT_CTRLR1_NDF(x)(((x) & BIT_MASK_CTRLR1_NDF) << BIT_SHIFT_CTRLR1_NDF)
+#define BIT_INVC_CTRLR1_NDF (~(BIT_MASK_CTRLR1_NDF << BIT_SHIFT_CTRLR1_NDF))
+
+// SSIENR          0x08  //  1 bit
+#define BIT_SHIFT_SSIENR_SSI_EN    0
+#define BIT_MASK_SSIENR_SSI_EN     0x1
+#define BIT_SSIENR_SSI_EN(x)(((x) & BIT_MASK_SSIENR_SSI_EN) << BIT_SHIFT_SSIENR_SSI_EN)
+#define BIT_INVC_SSIENR_SSI_EN (~(BIT_MASK_SSIENR_SSI_EN << BIT_SHIFT_SSIENR_SSI_EN))
+
+// MWCR            0x0c  //  3 bits
+#define BIT_SHIFT_MWCR_MWMOD    0
+#define BIT_MASK_MWCR_MWMOD     0x1
+#define BIT_MWCR_MWMOD(x)(((x) & BIT_MASK_MWCR_MWMOD) << BIT_SHIFT_MWCR_MWMOD)
+#define BIT_INVC_MWCR_MWMOD (~(BIT_MASK_MWCR_MWMOD << BIT_SHIFT_MWCR_MWMOD))
+
+#define BIT_SHIFT_MWCR_MDD      1
+#define BIT_MASK_MWCR_MDD       0x1
+#define BIT_MWCR_MDD(x)(((x) & BIT_MASK_MWCR_MDD) << BIT_SHIFT_MWCR_MDD)
+#define BIT_INVC_MWCR_MDD (~(BIT_MASK_MWCR_MDD << BIT_SHIFT_MWCR_MDD))
+
+#define BIT_SHIFT_MWCR_MHS      2
+#define BIT_MASK_MWCR_MHS       0x1
+#define BIT_MWCR_MHS(x)(((x) & BIT_MASK_MWCR_MHS) << BIT_SHIFT_MWCR_MHS)
+#define BIT_INVC_MWCR_MHS (~(BIT_MASK_MWCR_MHS << BIT_SHIFT_MWCR_MHS))
+
+// SER             0x10   // Variable Length
+#define BIT_SHIFT_SER_SER    0
+#define BIT_MASK_SER_SER     0xFF
+#define BIT_SER_SER(x)(((x) & BIT_MASK_SER_SER) << BIT_SHIFT_SER_SER)
+#define BIT_INVC_SER_SER (~(BIT_MASK_SER_SER << BIT_SHIFT_SER_SER))
+
+// BAUDR           0x14  // 16 bits
+#define BIT_SHIFT_BAUDR_SCKDV    0
+#define BIT_MASK_BAUDR_SCKDV     0xFFFF
+#define BIT_BAUDR_SCKDV(x)(((x) & BIT_MASK_BAUDR_SCKDV) << BIT_SHIFT_BAUDR_SCKDV)
+#define BIT_INVC_BAUDR_SCKDV (~(BIT_MASK_BAUDR_SCKDV << BIT_SHIFT_BAUDR_SCKDV))
+
+// TXFLTR          0x18        // Variable Length
+#define BIT_SHIFT_TXFTLR_TFT    0
+#define BIT_MASK_TXFTLR_TFT     0x3F  // (TX_ABW-1):0
+#define BIT_TXFTLR_TFT(x)(((x) & BIT_MASK_TXFTLR_TFT) << BIT_SHIFT_TXFTLR_TFT)
+#define BIT_INVC_TXFTLR_TFT (~(BIT_MASK_TXFTLR_TFT << BIT_SHIFT_TXFTLR_TFT))
+
+// RXFLTR          0x1c        // Variable Length
+#define BIT_SHIFT_RXFTLR_RFT    0
+#define BIT_MASK_RXFTLR_RFT     0x3F  // (RX_ABW-1):0
+#define BIT_RXFTLR_RFT(x)(((x) & BIT_MASK_RXFTLR_RFT) << BIT_SHIFT_RXFTLR_RFT)
+#define BIT_INVC_RXFTLR_RFT (~(BIT_MASK_RXFTLR_RFT << BIT_SHIFT_RXFTLR_RFT))
+
+// TXFLR           0x20  // see     [READ ONLY]
+#define BIT_MASK_TXFLR_TXTFL    0x7F  // (TX_ABW):0
+
+// RXFLR           0x24  // see     [READ ONLY]
+#define BIT_MASK_RXFLR_RXTFL    0x7F  // (RX_ABW):0
+
+// SR              0x28  //  7 bits [READ ONLY]
+#define BIT_SR_BUSY  BIT0
+#define BIT_SR_TFNF  BIT1
+#define BIT_SR_TFE   BIT2
+#define BIT_SR_RFNE  BIT3
+#define BIT_SR_RFF   BIT4
+#define BIT_SR_TXE   BIT5
+#define BIT_SR_DCOL  BIT6
+
+// IMR             0x2c  // see
+#define BIT_SHIFT_IMR_TXEIM    0
+#define BIT_MASK_IMR_TXEIM     0x1
+// #define BIT_IMR_TXEIM(x)(((x) & BIT_MASK_IMR_TXEIM) << BIT_SHIFT_IMR_TXEIM)
+#define BIT_INVC_IMR_TXEIM (~(BIT_MASK_IMR_TXEIM << BIT_SHIFT_IMR_TXEIM))
+
+#define BIT_SHIFT_IMR_TXOIM    1
+#define BIT_MASK_IMR_TXOIM     0x1
+// #define BIT_IMR_TXOIM(x)(((x) & BIT_MASK_IMR_TXOIM) << BIT_SHIFT_IMR_TXOIM)
+#define BIT_INVC_IMR_TXOIM (~(BIT_MASK_IMR_TXOIM << BIT_SHIFT_IMR_TXOIM))
+
+#define BIT_SHIFT_IMR_RXUIM    2
+#define BIT_MASK_IMR_RXUIM     0x1
+// #define BIT_IMR_RXUIM(x)(((x) & BIT_MASK_IMR_RXUIM) << BIT_SHIFT_IMR_RXUIM)
+#define BIT_INVC_IMR_RXUIM (~(BIT_MASK_IMR_RXUIM << BIT_SHIFT_IMR_RXUIM))
+
+#define BIT_SHIFT_IMR_RXOIM    3
+#define BIT_MASK_IMR_RXOIM     0x1
+// #define BIT_IMR_RXOIM(x)(((x) & BIT_MASK_IMR_RXOIM) << BIT_SHIFT_IMR_RXOIM)
+#define BIT_INVC_IMR_RXOIM (~(BIT_MASK_IMR_RXOIM << BIT_SHIFT_IMR_RXOIM))
+
+#define BIT_SHIFT_IMR_RXFIM    4
+#define BIT_MASK_IMR_RXFIM     0x1
+// #define BIT_IMR_RXFIM(x)(((x) & BIT_MASK_IMR_RXFIM) << BIT_SHIFT_IMR_RXFIM)
+#define BIT_INVC_IMR_RXFIM (~(BIT_MASK_IMR_RXFIM << BIT_SHIFT_IMR_RXFIM))
+
+#define BIT_SHIFT_IMR_MSTIM    5
+#define BIT_MASK_IMR_MSTIM     0x1
+// #define BIT_IMR_MSTIM(x)(((x) & BIT_MASK_IMR_MSTIM) << BIT_SHIFT_IMR_MSTIM)
+#define BIT_INVC_IMR_MSTIM (~(BIT_MASK_IMR_MSTIM << BIT_SHIFT_IMR_MSTIM))
+
+#define BIT_IMR_TXEIM  BIT0
+#define BIT_IMR_TXOIM  BIT1
+#define BIT_IMR_RXUIM  BIT2
+#define BIT_IMR_RXOIM  BIT3
+#define BIT_IMR_RXFIM  BIT4
+#define BIT_IMR_MSTIM  BIT5
+
+// ISR             0x30  //  6 bits [READ ONLY]
+#define BIT_ISR_TXEIS  BIT0
+#define BIT_ISR_TXOIS  BIT1
+#define BIT_ISR_RXUIS  BIT2
+#define BIT_ISR_RXOIS  BIT3
+#define BIT_ISR_RXFIS  BIT4
+#define BIT_ISR_MSTIS  BIT5
+
+// RISR            0x34  //  6 bits [READ ONLY]
+#define BIT_RISR_TXEIR  BIT0
+#define BIT_RISR_TXOIR  BIT1
+#define BIT_RISR_RXUIR  BIT2
+#define BIT_RISR_RXOIR  BIT3
+#define BIT_RISR_RXFIR  BIT4
+#define BIT_RISR_MSTIR  BIT5
+
+// TXOICR          0x38  //  1 bits [READ ONLY]
+// RXOICR          0x3c  //  1 bits [READ ONLY]
+// RXUICR          0x40  //  1 bits [READ ONLY]
+// MSTICR          0x44  //  1 bits [READ ONLY]
+// ICR             0x48  //  1 bits [READ ONLY]
+
+// DMACR           0x4c  //  2 bits
+#define BIT_SHIFT_DMACR_RDMAE    0
+#define BIT_MASK_DMACR_RDMAE     0x1
+#define BIT_DMACR_RDMAE(x)(((x) & BIT_MASK_DMACR_RDMAE) << BIT_SHIFT_DMACR_RDMAE)
+#define BIT_INVC_DMACR_RDMAE (~(BIT_MASK_DMACR_RDMAE << BIT_SHIFT_DMACR_RDMAE))
+
+#define BIT_SHIFT_DMACR_TDMAE    1
+#define BIT_MASK_DMACR_TDMAE     0x1
+#define BIT_DMACR_TDMAE(x)(((x) & BIT_MASK_DMACR_TDMAE) << BIT_SHIFT_DMACR_TDMAE)
+#define BIT_INVC_DMACR_TDMAE (~(BIT_MASK_DMACR_TDMAE << BIT_SHIFT_DMACR_TDMAE))
+
+// DMATDLR         0x50
+#define BIT_SHIFT_DMATDLR_DMATDL    0
+#define BIT_MASK_DMATDLR_DMATDL     0x3F  // (TX_ABW-1):0
+#define BIT_DMATDLR_DMATDL(x)(((x) & BIT_MASK_DMATDLR_DMATDL) << BIT_SHIFT_DMATDLR_DMATDL)
+#define BIT_INVC_DMATDLR_DMATDL (~(BIT_MASK_DMATDLR_DMATDL << BIT_SHIFT_DMATDLR_DMATDL))
+
+// DMARDLR         0x54
+#define BIT_SHIFT_DMARDLR_DMARDL    0
+#define BIT_MASK_DMARDLR_DMARDL     0x3F  // (RX_ABW-1):0
+#define BIT_DMARDLR_DMARDL(x)(((x) & BIT_MASK_DMARDLR_DMARDL) << BIT_SHIFT_DMARDLR_DMARDL)
+#define BIT_INVC_DMARDLR_DMARDL (~(BIT_MASK_DMARDLR_DMARDL << BIT_SHIFT_DMARDLR_DMARDL))
+
+// IDR             0x58  // 32 bits [READ ONLY]
+// COMP_VERSION    0x5c  // 32 bits [READ ONLY]
+
+// DR              0x60  // 16 bits 0x60-0xEC
+#define BIT_SHIFT_DR_DR    0
+#define BIT_MASK_DR_DR     0xFFFF
+#define BIT_DR_DR(x)(((x) & BIT_MASK_DR_DR) << BIT_SHIFT_DR_DR)
+#define BIT_INVC_DR_DR (~(BIT_MASK_DR_DR << BIT_SHIFT_DR_DR))
+
+// RX_SAMPLE_DLY   0xF0  //  8 bits
+#define BIT_SHIFT_RX_SAMPLE_DLY_RSD    0
+#define BIT_MASK_RX_SAMPLE_DLY_RSD     0xFFFF
+#define BIT_RX_SAMPLE_DLY_RSD(x)(((x) & BIT_MASK_RX_SAMPLE_DLY_RSD) << BIT_SHIFT_RX_SAMPLE_DLY_RSD)
+#define BIT_INVC_RX_SAMPLE_DLY_RSD (~(BIT_MASK_RX_SAMPLE_DLY_RSD << BIT_SHIFT_RX_SAMPLE_DLY_RSD))
+
+// RSVD_0          0xF4  // 32 bits
+// RSVD_1          0xF8  // 32 bits
+// RSVD_2          0xFC  // 32 bits
+
+// SSI0 Pinmux
+#define BIT_SHIFT_SSI0_PIN_EN    0
+#define BIT_MASK_SSI0_PIN_EN     0x1
+#define BIT_SSI0_PIN_EN(x)(((x) & BIT_MASK_SSI0_PIN_EN) << BIT_SHIFT_SSI0_PIN_EN)
+#define BIT_INVC_SSI0_PIN_EN (~(BIT_MASK_SSI0_PIN_EN << BIT_SHIFT_SSI0_PIN_EN))
+
+#define BIT_SHIFT_SSI0_PIN_SEL    1
+#define BIT_MASK_SSI0_PIN_SEL     0x7
+#define BIT_SSI0_PIN_SEL(x)(((x) & BIT_MASK_SSI0_PIN_SEL) << BIT_SHIFT_SSI0_PIN_SEL)
+#define BIT_INVC_SSI0_PIN_SEL (~(BIT_MASK_SSI0_PIN_SEL << BIT_SHIFT_SSI0_PIN_SEL))
+
+// SSI1 Pinmux
+#define BIT_SHIFT_SSI1_PIN_EN    4
+#define BIT_MASK_SSI1_PIN_EN     0x1
+#define BIT_SSI1_PIN_EN(x)(((x) & BIT_MASK_SSI1_PIN_EN) << BIT_SHIFT_SSI1_PIN_EN)
+#define BIT_INVC_SSI1_PIN_EN (~(BIT_MASK_SSI1_PIN_EN << BIT_SHIFT_SSI1_PIN_EN))
+
+#define BIT_SHIFT_SSI1_PIN_SEL    5
+#define BIT_MASK_SSI1_PIN_SEL     0x7
+#define BIT_SSI1_PIN_SEL(x)(((x) & BIT_MASK_SSI1_PIN_SEL) << BIT_SHIFT_SSI1_PIN_SEL)
+#define BIT_INVC_SSI1_PIN_SEL (~(BIT_MASK_SSI1_PIN_SEL << BIT_SHIFT_SSI1_PIN_SEL))
+
+// SSI2 Pinmux
+#define BIT_SHIFT_SSI2_PIN_EN    8
+#define BIT_MASK_SSI2_PIN_EN     0x1
+#define BIT_SSI2_PIN_EN(x)(((x) & BIT_MASK_SSI2_PIN_EN) << BIT_SHIFT_SSI2_PIN_EN)
+#define BIT_INVC_SSI2_PIN_EN (~(BIT_MASK_SSI2_PIN_EN << BIT_SHIFT_SSI2_PIN_EN))
+
+#define BIT_SHIFT_SSI2_PIN_SEL    9
+#define BIT_MASK_SSI2_PIN_SEL     0x7
+#define BIT_SSI2_PIN_SEL(x)(((x) & BIT_MASK_SSI2_PIN_SEL) << BIT_SHIFT_SSI2_PIN_SEL)
+#define BIT_INVC_SSI2_PIN_SEL (~(BIT_MASK_SSI2_PIN_SEL << BIT_SHIFT_SSI2_PIN_SEL))
+
+// SSI0 Multiple Chip Selection (Pinmux Select is controlled by BIT_SSI0_PIN_SEL)
+#define BIT_SHIFT_SSI0_MULTI_CS_EN    28
+#define BIT_MASK_SSI0_MULTI_CS_EN     0x1
+#define BIT_SSI0_MULTI_CS_EN(x)(((x) & BIT_MASK_SSI0_MULTI_CS_EN) << BIT_SHIFT_SSI0_MULTI_CS_EN)
+#define BIT_INVC_SSI0_MULTI_CS_EN (~(BIT_MASK_SSI0_MULTI_CS_EN << BIT_SHIFT_SSI0_MULTI_CS_EN))
+
+
+#define HAL_SSI_READ32(SsiIndex, addr)         \
+    HAL_READ32(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr)
+#define HAL_SSI_WRITE32(SsiIndex, addr, value) \
+    HAL_WRITE32(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr, value)
+#define HAL_SSI_READ16(SsiIndex, addr)         \
+    HAL_READ16(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr)
+#define HAL_SSI_WRITE16(SsiIndex, addr, value) \
+    HAL_WRITE16(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr, value)
+#define HAL_SSI_READ8(SsiIndex, addr)          \
+    HAL_READ8(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr)
+#define HAL_SSI_WRITE8(SsiIndex, addr, value)  \
+    HAL_WRITE8(SPI0_REG_BASE+ (SsiIndex*SSI_REG_OFF), addr, value)
+
+
+// SSI Pinmux Select
+typedef enum _SSI0_PINMUX_SELECT_ {
+    SSI0_MUX_TO_GPIOE = S0,
+    SSI0_MUX_TO_GPIOC = S1
+}SSI0_PINMUX_SELECT, *PSSI0_PINMUX_SELECT;
+
+typedef enum _SSI1_PINMUX_SELECT_ {
+    SSI1_MUX_TO_GPIOA = S0,
+    SSI1_MUX_TO_GPIOB = S1,
+    SSI1_MUX_TO_GPIOD = S2
+}SSI1_PINMUX_SELECT, *PSSI1_PINMUX_SELECT;
+
+typedef enum _SSI2_PINMUX_SELECT_ {
+    SSI2_MUX_TO_GPIOG = S0,
+    SSI2_MUX_TO_GPIOE = S1,
+    SSI2_MUX_TO_GPIOD = S2
+}SSI2_PINMUX_SELECT, *PSSI2_PINMUX_SELECT;
+
+typedef enum _SSI0_MULTI_CS_PINMUX_SELECT_ {
+    SSI0_CS_MUX_TO_GPIOE    = S0,
+    SSI0_CS_MUX_TO_GPIOC    = S1
+}SSI0_MULTI_CS_PINMUX_SELECT, *PSSI0_MULTI_CS_PINMUX_SELECT;
+
+typedef enum _SSI_CTRLR0_TMOD_ {
+    TMOD_TR       = 0,
+    TMOD_TO       = 1,
+    TMOD_RO       = 2,
+    TMOD_EEPROM_R = 3
+}SSI_CTRLR0_TMOD, *PSSI_CTRLR0_TMOD;
+
+typedef enum _SSI_CTRLR0_SCPOL_ {
+    SCPOL_INACTIVE_IS_LOW  = 0,
+    SCPOL_INACTIVE_IS_HIGH = 1
+}SSI_CTRLR0_SCPOL, *PSSI_CTRLR0_SCPOL;
+
+typedef enum _SSI_CTRLR0_SCPH_ {
+    SCPH_TOGGLES_IN_MIDDLE = 0,
+    SCPH_TOGGLES_AT_START  = 1
+}SSI_CTRLR0_SCPH, *PSSI_CTRLR0_SCPH;
+
+typedef enum _SSI_CTRLR0_DFS_ {
+    DFS_4_BITS   = 3,
+    DFS_5_BITS   = 4,
+    DFS_6_BITS   = 5,
+    DFS_7_BITS   = 6,
+    DFS_8_BITS   = 7,
+    DFS_9_BITS   = 8,
+    DFS_10_BITS  = 9,
+    DFS_11_BITS  = 10,
+    DFS_12_BITS  = 11,
+    DFS_13_BITS  = 12,
+    DFS_14_BITS  = 13,
+    DFS_15_BITS  = 14,
+    DFS_16_BITS  = 15,
+}SSI_CTRLR0_DFS, *PSSI_CTRLR0_DFS;
+
+typedef enum _SSI_CTRLR0_CFS_ {
+    CFS_1_BIT    = 0,
+    CFS_2_BITS   = 1,
+    CFS_3_BITS   = 2,
+    CFS_4_BITS   = 3,
+    CFS_5_BITS   = 4,
+    CFS_6_BITS   = 5,
+    CFS_7_BITS   = 6,
+    CFS_8_BITS   = 7,
+    CFS_9_BITS   = 8,
+    CFS_10_BITS  = 9,
+    CFS_11_BITS  = 10,
+    CFS_12_BITS  = 11,
+    CFS_13_BITS  = 12,
+    CFS_14_BITS  = 13,
+    CFS_15_BITS  = 14,
+    CFS_16_BITS  = 15
+}SSI_CTRLR0_CFS, *PSSI_CTRLR0_CFS;
+
+typedef enum _SSI_CTRLR0_SLV_OE_ {
+    SLV_TXD_ENABLE  = 0,
+    SLV_TXD_DISABLE = 1
+}SSI_CTRLR0_SLV_OE, *PSSI_CTRLR0_SLV_OE;
+
+typedef enum _SSI_ROLE_SELECT_ {
+    SSI_SLAVE  = 0,
+    SSI_MASTER = 1
+}SSI_ROLE_SELECT, *PSSI_ROLE_SELECT;
+
+typedef enum _SSI_FRAME_FORMAT_ {
+    FRF_MOTOROLA_SPI = 0,
+    FRF_TI_SSP       = 1,
+    FRF_NS_MICROWIRE = 2,
+    FRF_RSVD         = 3
+}SSI_FRAME_FORMAT, *PSSI_FRAME_FORMAT;
+
+typedef enum _SSI_DMACR_ENABLE_ {
+    SSI_NODMA        = 0,
+    SSI_RXDMA_ENABLE = 1,
+    SSI_TXDMA_ENABLE = 2,
+    SSI_TRDMA_ENABLE = 3
+}SSI_DMACR_ENABLE, *PSSI_DMACR_ENABLE;
+
+typedef enum _SSI_MWCR_HANDSHAKE_ {
+    MW_HANDSHAKE_DISABLE = 0,
+    MW_HANDSHAKE_ENABLE  = 1
+}SSI_MWCR_HANDSHAKE, *PSSI_MWCR_HANDSHAKE;
+
+typedef enum _SSI_MWCR_DIRECTION_ {
+    MW_DIRECTION_SLAVE_TO_MASTER = 0,
+    MW_DIRECTION_MASTER_TO_SLAVE = 1
+}SSI_MWCR_DIRECTION, *PSSI_MWCR_DIRECTION;
+
+typedef enum _SSI_MWCR_TMOD_ {
+    MW_TMOD_NONSEQUENTIAL = 0,
+    MW_TMOD_SEQUENTIAL    = 1
+}SSI_MWCR_TMOD, *PSSI_MWCR_TMOD;
+
+typedef enum _SSI_DATA_TRANSFER_MECHANISM_ {
+    SSI_DTM_BASIC,
+    SSI_DTM_INTERRUPT,
+    SSI_DTM_DMA
+}SSI_DATA_TRANSFER_MECHANISM, *PSSI_DATA_TRANSFER_MECHANISM;
+
+
+_LONG_CALL_ HAL_Status HalSsiPinmuxEnableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiEnableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiDisableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiInitRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiSetSclkPolarityRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiSetSclkPhaseRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiWriteRtl8195a(VOID *Adaptor, u32 value);
+_LONG_CALL_ HAL_Status HalSsiLoadSettingRtl8195a(VOID *Adaptor, VOID *Setting);
+_LONG_CALL_ HAL_Status HalSsiSetInterruptMaskRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiSetDeviceRoleRtl8195a(VOID *Adaptor, u32 Role);
+_LONG_CALL_ HAL_Status HalSsiInterruptEnableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiInterruptDisableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiReadInterruptRtl8195a(VOID *Adaptor, VOID *RxData, u32 Length);
+_LONG_CALL_ HAL_Status HalSsiSetRxFifoThresholdLevelRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiSetTxFifoThresholdLevelRtl8195a(VOID *Adaptor);
+_LONG_CALL_ HAL_Status HalSsiWriteInterruptRtl8195a(VOID *Adaptor, VOID *TxData, u32 Length);
+_LONG_CALL_ HAL_Status HalSsiSetSlaveEnableRegisterRtl8195a(VOID *Adaptor, u32 SlaveIndex);
+_LONG_CALL_ u32 HalSsiBusyRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiWriteableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiReadableRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetInterruptMaskRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetRxFifoLevelRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetTxFifoLevelRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetStatusRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetInterruptStatusRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiReadRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetRawInterruptStatusRtl8195a(VOID *Adaptor);
+_LONG_CALL_ u32 HalSsiGetSlaveEnableRegisterRtl8195a(VOID *Adaptor);
+
+_LONG_CALL_ VOID _SsiReadInterrupt(VOID *Adaptor);
+_LONG_CALL_ VOID _SsiWriteInterrupt(VOID *Adaptor);
+_LONG_CALL_ u32  _SsiIrqHandle(VOID *Adaptor);
+
+// ROM code patch
+VOID _SsiReadInterruptRtl8195a(VOID *Adapter);
+VOID _SsiWriteInterruptRtl8195a(VOID *Adapter);
+HAL_Status HalSsiInitRtl8195a_Patch(VOID *Adaptor);
+HAL_Status HalSsiPinmuxEnableRtl8195a_Patch(VOID *Adaptor);
+HAL_Status HalSsiPinmuxDisableRtl8195a(VOID *Adaptor);
+HAL_Status HalSsiDeInitRtl8195a(VOID * Adapter);
+HAL_Status HalSsiClockOffRtl8195a(VOID * Adapter);
+HAL_Status HalSsiClockOnRtl8195a(VOID * Adapter);
+VOID HalSsiSetSclkRtl8195a(VOID *Adapter, u32 ClkRate);
+HAL_Status HalSsiIntReadRtl8195a(VOID *Adapter, VOID *RxData, u32 Length);
+HAL_Status HalSsiIntWriteRtl8195a(VOID *Adapter, u8 *pTxData, u32 Length);
+#ifdef CONFIG_GDMA_EN
+VOID HalSsiTxGdmaLoadDefRtl8195a(VOID *Adapter);
+VOID HalSsiRxGdmaLoadDefRtl8195a(VOID *Adapter);
+VOID HalSsiDmaInitRtl8195a(VOID *Adapter);
+HAL_Status HalSsiDmaSendRtl8195a(VOID *Adapter, u8 *pTxData, u32 Length);
+HAL_Status HalSsiDmaRecvRtl8195a(VOID *Adapter, u8 *pRxData, u32 Length);
+#endif  // end of "#ifdef CONFIG_GDMA_EN"
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_timer.h

@@ -0,0 +1,222 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_TIMER_H_
+#define _RTL8195A_TIMER_H_
+
+
+#define TIMER_TICK_US               31
+
+#define TIMER_LOAD_COUNT_OFF        0x00
+#define TIMER_CURRENT_VAL_OFF       0x04
+#define TIMER_CTL_REG_OFF           0x08
+#define TIMER_EOI_OFF               0x0c
+#define TIMER_INT_STATUS_OFF        0x10
+#define TIMER_INTERVAL              0x14
+#define TIMERS_INT_STATUS_OFF       0xa0
+#define TIMERS_EOI_OFF              0xa4
+#define TIMERS_RAW_INT_STATUS_OFF   0xa8
+#define TIMERS_COMP_VER_OFF         0xac
+
+#define MAX_TIMER_VECTOR_TABLE_NUM                  6
+
+#define HAL_TIMER_READ32(addr)            (*((volatile u32*)(TIMER_REG_BASE + addr)))//HAL_READ32(TIMER_REG_BASE, addr)
+#define HAL_TIMER_WRITE32(addr, value)    ((*((volatile u32*)(TIMER_REG_BASE + addr))) = value)//HAL_WRITE32(TIMER_REG_BASE, addr, value)
+#define HAL_TIMER_READ16(addr)            (*((volatile u16*)(TIMER_REG_BASE + addr)))//HAL_READ16(TIMER_REG_BASE, addr)
+#define HAL_TIMER_WRITE16(addr, value)    ((*((volatile u16*)(TIMER_REG_BASE + addr))) = value)//HAL_WRITE16(TIMER_REG_BASE, addr, value)
+#define HAL_TIMER_READ8(addr)             (*((volatile u8*)(TIMER_REG_BASE + addr)))//HAL_READ8(TIMER_REG_BASE, addr)
+#define HAL_TIMER_WRITE8(addr, value)     ((*((volatile u8*)(TIMER_REG_BASE + addr))) = value)//HAL_WRITE8(TIMER_REG_BASE, addr, value)
+
+_LONG_CALL_ u32
+HalGetTimerIdRtl8195a(
+    IN  u32     *TimerID
+);
+
+_LONG_CALL_ BOOL
+HalTimerInitRtl8195a(
+    IN  VOID    *Data
+);
+
+_LONG_CALL_ u32
+HalTimerReadCountRtl8195a(
+    IN  u32     TimerId
+);
+
+_LONG_CALL_ VOID
+HalTimerIrqClearRtl8195a(
+    IN  u32 TimerId
+);
+
+_LONG_CALL_ VOID
+HalTimerDisRtl8195a(
+    IN  u32 TimerId
+);
+
+_LONG_CALL_ VOID
+HalTimerEnRtl8195a(
+    IN  u32 TimerId
+);
+
+_LONG_CALL_ VOID
+HalTimerDumpRegRtl8195a(
+    IN  u32 TimerId
+);
+
+// ROM Code patch
+HAL_Status
+HalTimerInitRtl8195a_Patch(
+    IN  VOID    *Data
+);
+
+u32
+HalTimerReadCountRtl8195a_Patch(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerReLoadRtl8195a_Patch(
+    IN  u32 TimerId,
+    IN  u32 LoadUs
+);
+
+u32
+HalTimerReadCountRtl8195a_Patch(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerIrqEnRtl8195a(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerIrqDisRtl8195a(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerEnRtl8195a_Patch(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerDisRtl8195a_Patch(
+    IN  u32 TimerId
+);
+
+VOID
+HalTimerDeInitRtl8195a_Patch(
+    IN  VOID    *Data
+);
+
+#ifdef CONFIG_CHIP_C_CUT
+
+__weak _LONG_CALL_
+VOID
+HalTimerIrq2To7HandleV02(
+    IN  VOID    *Data
+);
+
+__weak _LONG_CALL_
+HAL_Status
+HalTimerIrqRegisterRtl8195aV02(
+    IN  VOID    *Data
+);
+
+__weak _LONG_CALL_
+HAL_Status
+HalTimerInitRtl8195aV02(
+    IN  VOID    *Data
+);
+
+__weak _LONG_CALL_
+u32
+HalTimerReadCountRtl8195aV02(
+    IN  u32 TimerId
+);
+
+__weak _LONG_CALL_
+VOID
+HalTimerReLoadRtl8195aV02(
+    IN  u32 TimerId,
+    IN  u32 LoadUs
+);
+
+__weak _LONG_CALL_
+HAL_Status
+HalTimerIrqUnRegisterRtl8195aV02(
+    IN  VOID    *Data
+);
+
+__weak _LONG_CALL_
+VOID
+HalTimerDeInitRtl8195aV02(
+    IN  VOID    *Data
+);
+
+#endif  // end of "#ifdef CONFIG_CHIP_C_CUT"
+
+// HAL functions wrapper
+static __inline HAL_Status
+HalTimerInit(
+    IN  VOID    *Data
+)
+{
+    return (HalTimerInitRtl8195a_Patch(Data));
+}
+
+static __inline VOID
+HalTimerEnable(
+    IN  u32 TimerId
+)
+{
+    HalTimerIrqEnRtl8195a(TimerId);
+    HalTimerEnRtl8195a_Patch(TimerId);
+}
+
+static __inline VOID
+HalTimerDisable(
+    IN  u32 TimerId
+)
+{
+    HalTimerDisRtl8195a_Patch(TimerId);
+}
+
+static __inline VOID
+HalTimerReLoad(
+    IN  u32 TimerId,
+    IN  u32 LoadUs
+)
+{
+    HalTimerReLoadRtl8195a_Patch(TimerId, LoadUs);
+}
+
+#ifndef CONFIG_CHIP_C_CUT
+
+static __inline VOID
+HalTimerDeInit(
+    IN  VOID    *Data
+)
+{
+    HalTimerDeInitRtl8195a_Patch(Data);
+}
+
+#else
+
+static __inline VOID
+HalTimerDeInit(
+    IN  VOID    *Data
+)
+{
+    HalTimerDeInitRtl8195aV02(Data);
+}
+
+#endif      // end of "#ifndef CONFIG_CHIP_C_CUT"
+
+#endif //_RTL8195A_TIMER_H_

lib/fwlib/rtl8195a/rtl8195a_uart.h

@@ -0,0 +1,532 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#ifndef _RTL8195A_UART_H_
+#define _RTL8195A_UART_H_
+
+#define MAX_UART_INDEX      2
+
+#define RUART_DLL_OFF                   0x00
+#define RUART_DLM_OFF                   0x04    //RW, DLAB = 1
+#define RUART_INTERRUPT_EN_REG_OFF      0x04
+#define RUART_IER_ERBI                  0x01    //BIT0, Enable Received Data Available Interrupt (rx trigger)
+#define RUART_IER_ETBEI                 (1<<1)  //BIT1, Enable Transmitter FIFO Empty Interrupt (tx fifo empty)
+#define RUART_IER_ELSI                  (1<<2)  //BIT2, Enable Receiver Line Status Interrupt (receiver line status)
+#define RUART_IER_EDSSI                 (1<<3)  //BIT3, Enable Modem Status Interrupt (modem status transition)
+
+#define RUART_INT_ID_REG_OFF            0x08    //[R]
+#define RUART_IIR_INT_PEND              0x01
+#define RUART_IIR_INT_ID                (0x07<<1) //011(3), 010(2), 110(6), 001(1), 000(0)
+#define RUART_FIFO_CTL_REG_OFF          0x08    //[W]
+#define RUART_FIFO_CTL_REG_CLEAR_RXFIFO (1<<1)  //BIT1, 0x02, Write 1 clear
+#define RUART_FIFO_CTL_REG_CLEAR_TXFIFO (1<<2)  //BIT2, 0x04, Write 1 clear
+#define RUART_FIFO_CTL_REG_DMA_ENABLE   0x08    //BIT3
+
+#define FIFO_CTL_DEFAULT_WITH_FIFO_DMA  0xC9
+#define FIFO_CTL_DEFAULT_WITH_FIFO      0xC1
+
+#define RUART_MODEM_CTL_REG_OFF         0x10
+#define RUART_MCR_RTS                   BIT1
+#define RUART_MCL_AUTOFLOW_ENABLE       (1<<5)  //BIT5, 0x20
+
+#define RUART_LINE_CTL_REG_OFF          0x0C
+#define RUART_LINE_CTL_REG_DLAB_ENABLE  (1<<7)  //BIT7, 0x80
+
+#define RUART_LINE_STATUS_REG_OFF       0x14
+#define RUART_LINE_STATUS_REG_DR        0x01    //BIT0, Data Ready indicator
+#define RUART_LINE_STATUS_ERR_OVERRUN   (1<<1)  //BIT1, Over Run
+#define RUART_LINE_STATUS_ERR_PARITY    (1<<2)  //BIT2, Parity error
+#define RUART_LINE_STATUS_ERR_FRAMING   (1<<3)  //BIT3, Framing error
+#define RUART_LINE_STATUS_ERR_BREAK     (1<<4)  //BIT4, Break interrupt error
+#define RUART_LINE_STATUS_REG_THRE      (1<<5)  //BIT5, 0x20, Transmit Holding Register Empty Interrupt enable
+#define RUART_LINE_STATUS_REG_TEMT      (1<<6)  //BIT6, 0x40, Transmitter Empty indicator(bit)
+#define RUART_LINE_STATUS_ERR_RXFIFO    (1<<7)  //BIT7, RX FIFO error
+#define RUART_LINE_STATUS_ERR           (RUART_LINE_STATUS_ERR_OVERRUN|RUART_LINE_STATUS_ERR_PARITY| \
+                                        RUART_LINE_STATUS_ERR_FRAMING|RUART_LINE_STATUS_ERR_BREAK| \
+                                        RUART_LINE_STATUS_ERR_RXFIFO)      //Line status error
+
+#define RUART_MODEM_STATUS_REG_OFF      0x18    //Modem Status Register
+#define RUART_SCRATCH_PAD_REG_OFF       0x1C    //Scratch Pad Register
+#define RUART_SP_REG_RXBREAK_INT_STATUS (1<<7)  //BIT7, 0x80, Write 1 clear
+#define RUART_SP_REG_DBG_SEL            (0x0F<<8) //[11:8], Debug port selection
+#define RUART_SP_REG_XFACTOR_ADJ        (0x7FF<<16)  //[26:16]
+
+#define RUART_STS_REG_OFF               0x20
+#define RUART_STS_REG_RESET_RCV         (1<<3)  //BIT3, 0x08, Reset Uart Receiver
+#define RUART_STS_REG_XFACTOR           0xF<<4
+
+#define RUART_REV_BUF_REG_OFF           0x24  //Receiver Buffer Register
+#define RUART_TRAN_HOLD_REG_OFF         0x24  //Transmitter Holding Register
+
+#define RUART_MISC_CTL_REG_OFF          0x28
+#define RUART_TXDMA_BURSTSIZE_MASK      0xF8    //7:3
+#define RUART_RXDMA_BURSTSIZE_MASK      0x1F00  //12:8
+
+#define RUART_DEBUG_REG_OFF             0x3C
+
+// RUART_LINE_CTL_REG_OFF (0x0C)
+#define BIT_SHIFT_LCR_WLS             0     // word length select: 0: 7 bits, 1: 8bits
+#define BIT_MASK_LCR_WLS_8BITS        0x1
+#define BIT_LCR_WLS(x)(((x) & BIT_MASK_LCR_WLS_8BITS) << BIT_SHIFT_LCR_WLS)
+#define BIT_CLR_LCR_WLS (~(BIT_MASK_LCR_WLS_8BITS << BIT_SHIFT_LCR_WLS))
+
+#define BIT_SHIFT_LCR_STB             2     // Stop bit select: 0: no stop bit, 1: 1 stop bit
+#define BIT_MASK_LCR_STB_EN           0x1
+#define BIT_LCR_STB_EN(x)(((x) & BIT_MASK_LCR_STB_EN) << BIT_SHIFT_LCR_STB)
+#define BIT_INVC_LCR_STB_EN (~(BIT_MASK_LCR_STB_EN << BIT_SHIFT_LCR_STB))
+
+#define BIT_SHIFT_LCR_PARITY_EN       3
+#define BIT_MASK_LCR_PARITY_EN        0x1
+#define BIT_LCR_PARITY_EN(x)(((x) & BIT_MASK_LCR_PARITY_EN) << BIT_SHIFT_LCR_PARITY_EN)
+#define BIT_INVC_LCR_PARITY_EN (~(BIT_MASK_LCR_PARITY_EN << BIT_SHIFT_LCR_PARITY_EN))
+
+#define BIT_SHIFT_LCR_PARITY_TYPE       4
+#define BIT_MASK_LCR_PARITY_TYPE        0x1
+#define BIT_LCR_PARITY_TYPE(x)(((x) & BIT_MASK_LCR_PARITY_TYPE) << BIT_SHIFT_LCR_PARITY_TYPE)
+#define BIT_INVC_LCR_PARITY_TYPE (~(BIT_MASK_LCR_PARITY_TYPE << BIT_SHIFT_LCR_PARITY_TYPE))
+
+#define BIT_SHIFT_LCR_STICK_PARITY_EN       5
+#define BIT_MASK_LCR_STICK_PARITY_EN        0x1
+#define BIT_LCR_STICK_PARITY_EN(x)(((x) & BIT_MASK_LCR_STICK_PARITY_EN) << BIT_SHIFT_LCR_STICK_PARITY_EN)
+#define BIT_INVC_LCR_STICK_PARITY_EN (~(BIT_MASK_LCR_STICK_PARITY_EN << BIT_SHIFT_LCR_STICK_PARITY_EN))
+
+#define BIT_SHIFT_LCR_BREAK_CTRL       6
+#define BIT_MASK_LCR_BREAK_CTRL        0x1
+#define BIT_UART_LCR_BREAK_CTRL        ((BIT_MASK_LCR_BREAK_CTRL) << BIT_SHIFT_LCR_BREAK_CTRL)
+
+#define RUART_BAUD_RATE_2400     2400
+#define RUART_BAUD_RATE_4800     4800
+#define RUART_BAUD_RATE_9600     9600
+#define RUART_BAUD_RATE_19200    19200
+#define RUART_BAUD_RATE_38400    38400
+#define RUART_BAUD_RATE_57600    57600
+#define RUART_BAUD_RATE_115200   115200
+#define RUART_BAUD_RATE_921600   921600
+#define RUART_BAUD_RATE_1152000  1152000
+
+#define HAL_RUART_READ32(UartIndex, addr)    \
+    HAL_READ32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
+#define HAL_RUART_WRITE32(UartIndex, addr, value)    \
+    HAL_WRITE32(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
+#define HAL_RUART_READ16(UartIndex, addr)    \
+    HAL_READ16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
+#define HAL_RUART_WRITE16(UartIndex, addr, value)    \
+    HAL_WRITE16(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
+#define HAL_RUART_READ8(UartIndex, addr)    \
+    HAL_READ8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr)
+#define HAL_RUART_WRITE8(UartIndex, addr, value)    \
+    HAL_WRITE8(UART0_REG_BASE+ (UartIndex*RUART_REG_OFF), addr, value)
+
+#define UART_OVSR_POOL_MIN      1000
+#define UART_OVSR_POOL_MAX      2090
+#define DIVISOR_RESOLUTION      10
+#define JITTER_LIMIT            100
+#define UART_SCLK               (200000000*5/12)
+
+typedef struct _RUART_SPEED_SETTING_ {
+    u32 BaudRate;
+    u32 Ovsr;
+    u32 Div;
+    u16 Ovsr_adj;
+    u8 Ovsr_adj_max_bits;  // 9: No parity, 10: with Parity
+    u8 Ovsr_adj_bits;
+    u16 *Ovsr_adj_map;
+    u32 max_err;        // 10 ~ 100: 30
+    u32 Ovsr_min;       // 10 ~ 20: 1000
+    u32 Ovsr_max;       // 10 ~ 20: 2000
+    u32 divisor_resolution; // 1 ~ 20: 10
+    u32 jitter_lim;     // 50 ~ 100: 100
+    u32 sclk;           // 83.33333 MHz
+}RUART_SPEED_SETTING, *PRUART_SPEED_SETTING;
+
+typedef enum _UART_RXFIFO_TRIGGER_LEVEL_ {
+    OneByte       = 0x00,
+    FourBytes     = 0x01,
+    EightBytes    = 0x10,
+    FourteenBytes = 0x11
+}UART_RXFIFO_TRIGGER_LEVEL, *PUART_RXFIFO_TRIGGER_LEVEL;
+
+typedef enum _RUART0_PINMUX_SELECT_ {
+    RUART0_MUX_TO_GPIOC = S0,
+    RUART0_MUX_TO_GPIOE = S1,
+    RUART0_MUX_TO_GPIOA = S2
+}RUART0_PINMUX_SELECT, *PRUART0_PINMUX_SELECT;
+
+typedef enum _RUART1_PINMUX_SELECT_ {
+    RUART1_MUX_TO_GPIOD = S0,
+    RUART1_MUX_TO_GPIOE = S1,
+    RUART1_MUX_TO_GPIOB = S2
+}RUART1_PINMUX_SELECT, *PRUART1_PINMUX_SELECT;
+
+typedef enum _RUART2_PINMUX_SELECT_ {
+    RUART2_MUX_TO_GPIOA = S0,
+    RUART2_MUX_TO_GPIOC = S1,
+    RUART2_MUX_TO_GPIOD = S2
+}RUART2_PINMUX_SELECT, *PRUART2_PINMUX_SELECT;
+
+typedef enum _RUART_FLOW_CONTROL_ {
+    AUTOFLOW_DISABLE = 0,
+    AUTOFLOW_ENABLE  = 1
+}RUART_FLOW_CONTROL, *PRUART_FLOW_CONTROL;
+
+typedef enum _RUART_WORD_LEN_SEL_ {
+	RUART_WLS_7BITS = 0,
+    RUART_WLS_8BITS = 1
+}RUART_WORD_LEN_SEL, *PRUART_WORD_LEN_SEL;
+
+typedef enum _RUART_STOP_BITS_ {
+    RUART_STOP_BIT_1 = 0,
+    RUART_STOP_BIT_2 = 1
+}RUART_STOP_BITS, *PRUART_STOP_BITS;
+
+typedef enum _RUART_PARITY_CONTROL_ {
+	RUART_PARITY_DISABLE = 0,
+	RUART_PARITY_ENABLE  = 1
+}RUART_PARITY_CONTROL, *PRUART_PARITY_CONTROL;
+
+typedef enum _RUART_PARITY_TYPE_ {
+	RUART_ODD_PARITY  = 0,
+	RUART_EVEN_PARITY = 1
+}RUART_PARITY_TYPE, *PRUART_PARITY_TYPE;
+
+typedef enum _RUART_STICK_PARITY_CONTROL_ {
+    RUART_STICK_PARITY_DISABLE = 0,
+    RUART_STICK_PARITY_ENABLE  = 1
+}RUART_STICK_PARITY_CONTROL, *PRUART_STICK_PARITY_CONTROL;
+
+typedef enum _UART_INT_ID_ {
+    ModemStatus           = 0,
+    TxFifoEmpty           = 1,
+    ReceiverDataAvailable = 2,
+    ReceivLineStatus      = 3,
+    TimeoutIndication     = 6
+}UART_INT_ID, *PUART_INT_ID;
+
+typedef enum _HAL_UART_State_
+{
+  HAL_UART_STATE_NULL              = 0x00,    // UART hardware not been initial yet
+  HAL_UART_STATE_READY             = 0x10,    // UART is initialed, ready to use
+  HAL_UART_STATE_BUSY              = 0x20,    // UART hardware is busy on configuration
+  HAL_UART_STATE_BUSY_TX           = 0x21,    // UART is buzy on TX
+  HAL_UART_STATE_BUSY_RX           = 0x22,    // UART is busy on RX
+  HAL_UART_STATE_BUSY_TX_RX        = 0x23,    // UART is busy on TX an RX
+  HAL_UART_STATE_TIMEOUT           = 0x30,    // Transfer timeout
+  HAL_UART_STATE_ERROR             = 0x40     // UART Error
+}HAL_UART_State, *PHAL_UART_State;
+
+typedef enum _HAL_UART_Status_
+{
+  HAL_UART_STATUS_OK               = 0x00,    // Transfer OK
+  HAL_UART_STATUS_TIMEOUT          = 0x01,    // Transfer Timeout
+  HAL_UART_STATUS_ERR_OVERRUN      = 0x02,    // RX Over run
+  HAL_UART_STATUS_ERR_PARITY       = 0x04,    // Parity error
+  HAL_UART_STATUS_ERR_FRAM         = 0x08,    // Framing Error
+  HAL_UART_STATUS_ERR_BREAK        = 0x10,    // Break Interrupt
+  HAL_UART_STATUS_ERR_PARA         = 0x20,    // Parameter error
+  HAL_UART_STATUS_ERR_RXFIFO       = 0x80,    // RX FIFO error
+}HAL_UART_Status, *PHAL_UART_Status;
+
+u32
+HalRuartGetDebugValueRtl8195a(
+        IN VOID* Data,
+        IN u32    DbgSel
+        );
+
+#if 0
+u32
+FindElementIndex(
+        u32 Element,
+        u32* Array
+        );
+#endif
+
+VOID
+RuartResetRxFifoRtl8195a(
+        IN u8 UartIndex
+        );
+#if 0
+VOID
+RuartBusDomainEnableRtl8195a(
+        IN u8 UartIndex
+        );
+#endif
+
+HAL_Status
+HalRuartResetRxFifoRtl8195a(
+        IN VOID *Data
+        );
+
+HAL_Status
+HalRuartInitRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartDeInitRtl8195a(
+        IN VOID *Data  ///< RUART Adapter
+        );
+
+HAL_Status
+HalRuartPutCRtl8195a(
+        IN VOID *Data,
+        IN u8 TxData
+        );
+
+u32
+HalRuartSendRtl8195a(
+        IN VOID *Data,
+        IN u8 *pTxData,
+        IN u32 Length,
+        IN u32 Timeout
+        );
+
+HAL_Status
+HalRuartIntSendRtl8195a(
+        IN VOID *Data,      // PHAL_RUART_ADAPTER
+        IN u8 *pTxData,     // the Buffer to be send
+        IN u32 Length       // the length of data to be send
+        );
+
+HAL_Status
+HalRuartDmaSendRtl8195a(
+        IN VOID *Data,      // PHAL_RUART_ADAPTER
+        IN u8 *pTxData,     // the Buffer to be send
+        IN u32 Length      // the length of data to be send
+);
+
+HAL_Status
+HalRuartStopSendRtl8195a(
+        IN VOID *Data      // PHAL_RUART_ADAPTER
+);
+
+HAL_Status
+HalRuartGetCRtl8195a(
+        IN VOID *Data,
+        OUT u8  *pRxByte        
+        );
+
+u32
+HalRuartRecvRtl8195a(
+        IN VOID *Data,
+        IN u8  *pRxData,
+        IN u32 Length,
+        IN u32 Timeout
+        );
+
+HAL_Status
+HalRuartIntRecvRtl8195a(
+        IN VOID *Data,  ///< RUART Adapter
+        IN u8  *pRxData,  ///< Rx buffer
+        IN u32 Length      // buffer length
+        );
+
+HAL_Status
+HalRuartDmaRecvRtl8195a(
+        IN VOID *Data,  ///< RUART Adapter
+        IN u8  *pRxData,  ///< Rx buffer
+        IN u32 Length      // buffer length
+        );
+
+HAL_Status
+HalRuartStopRecvRtl8195a(
+        IN VOID *Data      // PHAL_RUART_ADAPTER
+);
+
+u8
+HalRuartGetIMRRtl8195a(
+        IN VOID *Data
+        );
+
+_LONG_CALL_ VOID
+HalRuartSetIMRRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartDmaInitRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartRTSCtrlRtl8195a(
+        IN VOID *Data,
+        IN BOOLEAN RtsCtrl
+        );
+
+VOID
+HalRuartRegIrqRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartIntEnableRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartIntDisableRtl8195a(
+        IN VOID *Data
+        );
+
+VOID
+HalRuartAdapterLoadDefRtl8195a(
+        IN VOID *pAdp,
+        IN u8 UartIdx
+);
+
+VOID
+HalRuartTxGdmaLoadDefRtl8195a(
+        IN VOID *pAdp,
+        IN VOID *pCfg
+);
+
+VOID
+HalRuartRxGdmaLoadDefRtl8195a(
+        IN VOID *pAdp,
+        IN VOID *pCfg
+);
+
+_LONG_CALL_  HAL_Status HalRuartIntSendRtl8195aV02(
+    IN VOID *Data,      // PHAL_RUART_ADAPTER
+    IN u8 *pTxData,     // the Buffer to be send
+    IN u32 Length      // the length of data to be send
+);
+
+_LONG_CALL_  HAL_Status
+HalRuartIntRecvRtl8195aV02(
+    IN VOID *Data,  ///< RUART Adapter
+    IN u8  *pRxData,  ///< Rx buffer
+    IN u32 Length      // buffer length
+);
+
+_LONG_CALL_ s32
+FindElementIndex_v02(
+        u32 Element,  ///< RUART Baudrate
+        u32* Array,    ///< Pre-defined Baudrate Array
+        u32 ElementNo
+);
+
+_LONG_CALL_ HAL_Status HalRuartInitRtl8195a_v02(IN VOID *Data);
+
+// New added function 2015/04/20
+HAL_Status
+HalRuartResetTxFifoRtl8195a(
+        IN VOID *Data  ///< RUART Adapter
+        );
+
+HAL_Status 
+HalRuartSetBaudRateRtl8195a(
+        IN VOID *Data
+        );
+
+HAL_Status 
+HalRuartEnableRtl8195a(
+    IN VOID *Data
+);
+
+HAL_Status 
+HalRuartDisableRtl8195a(
+    IN VOID *Data
+);
+
+HAL_Status 
+HalRuartFlowCtrlRtl8195a(
+    IN VOID *Data
+);
+
+HAL_Status
+HalRuartDmaSendRtl8195a_Patch(
+    IN VOID *Data,
+    IN u8 *pTxData,
+    IN u32 Length
+);
+
+HAL_Status
+RuartIsTimeout (
+    u32 StartCount,
+    u32 TimeoutCnt
+);
+
+HAL_Status
+HalRuartStopRecvRtl8195a_Patch(
+        IN VOID *Data
+);
+
+HAL_Status
+HalRuartStopSendRtl8195a_Patch(
+        IN VOID *Data
+);
+
+VOID
+HalRuartEnterCriticalRtl8195a(
+        IN VOID *Data
+);
+
+VOID
+HalRuartExitCriticalRtl8195a(
+        IN VOID *Data
+);
+
+#if CONFIG_CHIP_E_CUT
+_LONG_CALL_ HAL_Status 
+HalRuartSetBaudRateRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ HAL_Status 
+HalRuartInitRtl8195a_V04(
+    IN VOID *Data  ///< RUART Adapter
+);
+
+_LONG_CALL_ HAL_Status 
+HalRuartEnableRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ HAL_Status 
+HalRuartDisableRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ HAL_Status 
+HalRuartFlowCtrlRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ HAL_Status
+HalRuartDmaSendRtl8195a_V04(
+    IN VOID *Data,
+    IN u8 *pTxData,
+    IN u32 Length
+);
+
+_LONG_CALL_ HAL_Status
+HalRuartStopRecvRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ HAL_Status
+HalRuartStopSendRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ VOID
+HalRuartEnterCriticalRtl8195a_V04(
+    IN VOID *Data
+);
+
+_LONG_CALL_ VOID
+HalRuartExitCriticalRtl8195a_V04(
+    IN VOID *Data
+);
+
+#endif  // #if CONFIG_CHIP_E_CUT
+
+#endif

lib/fwlib/rtl8195a/rtl8195a_wdt.h

@@ -0,0 +1,86 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2014 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_WDT_H_
+#define _RTL8195A_WDT_H_
+
+#define WDGTIMERELY  (10*1024)  //us
+
+typedef struct _WDG_REG_ {
+    u16     WdgScalar;
+    u8      WdgEnByte;
+    u8      WdgClear:1;
+    u8      WdgCunLimit:4;
+    u8      Rsvd:1;
+    u8      WdgMode:1;
+    u8      WdgToISR:1;
+}WDG_REG, *PWDG_REG;
+
+typedef struct _WDG_ADAPTER_ {
+
+    WDG_REG             Ctrl;
+    IRQ_HANDLE          IrqHandle;
+    TIMER_ADAPTER       WdgGTimer;
+    VOID (*UserCallback)(u32 callback_id);    // User callback function
+    u32                 callback_id;
+}WDG_ADAPTER, *PWDG_ADAPTER;
+
+typedef enum _WDG_CNTLMT_ {
+    CNT1H    = 0,
+    CNT3H    = 1,
+    CNT7H    = 2,
+    CNTFH    = 3,
+    CNT1FH   = 4,
+    CNT3FH   = 5,
+    CNT7FH   = 6,
+    CNTFFH   = 7,
+    CNT1FFH  = 8,
+    CNT3FFH  = 9,
+    CNT7FFH  = 10,
+    CNTFFFH  = 11
+}WDG_CNTLMT, *PWDG_CNTLMT;
+
+
+typedef enum _WDG_MODE_ {
+    INT_MODE    = 0,
+    RESET_MODE  = 1
+}WDG_MODE, *PWDG_MODE;
+
+extern VOID
+WDGInitial(
+    IN  u32 Period
+);
+
+extern VOID
+WDGIrqInitial(
+    VOID
+);
+
+extern VOID
+WDGIrqInitial(
+    VOID
+);
+
+extern VOID
+WDGStop(
+    VOID
+);
+
+extern VOID
+WDGRefresh(
+    VOID
+);
+
+extern VOID
+WDGIrqCallBackReg(
+    IN VOID *CallBack,
+    IN u32   Id
+);
+
+#endif //_RTL8195A_WDT_H_

lib/fwlib/rtl8195a/src/rtl8195a_adc.c

@@ -0,0 +1,387 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "platform_autoconf.h" 
+#include "diag.h"
+#include "rtl8195a_adc.h"
+#include "hal_adc.h"
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CInit8195a
+//
+// Description:
+//		To initialize I2C module by using the given data.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the DeInit process.
+//          _EXIT_SUCCESS if the initialization succeeded.
+//          _EXIT_FAILURE if the initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-02.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalADCInit8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_ADC_INIT_DAT   pHalAdcInitData     =   (PHAL_ADC_INIT_DAT)Data;
+    u32 AdcTempDat;
+    u8  AdcTempIdx  =   pHalAdcInitData->ADCIdx;
+
+    /* Enable ADC power cut */
+/*
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_POWER);
+    AdcTempDat  |=  BIT_ADC_PWR_AUTO;
+    HAL_ADC_WRITE32(REG_ADC_POWER, AdcTempDat);
+*/
+    
+    /* ADC Control register set-up*/
+    AdcTempDat  = 0;
+    AdcTempDat  |= (BIT_CTRL_ADC_COMP_ONLY(pHalAdcInitData->ADCCompOnly)    |
+                    BIT_CTRL_ADC_ONESHOT(pHalAdcInitData->ADCOneShotEn)     |
+                    BIT_CTRL_ADC_OVERWRITE(pHalAdcInitData->ADCOverWREn)    |
+                    BIT_CTRL_ADC_ENDIAN(pHalAdcInitData->ADCEndian)         |
+                    BIT_CTRL_ADC_BURST_SIZE(pHalAdcInitData->ADCBurstSz)    |
+                    BIT_CTRL_ADC_THRESHOLD(pHalAdcInitData->ADCOneShotTD)   |
+                    BIT_CTRL_ADC_DBG_SEL(pHalAdcInitData->ADCDbgSel));
+    HAL_ADC_WRITE32(REG_ADC_CONTROL,AdcTempDat);
+
+    DBG_8195A_ADC_LVL(HAL_ADC_LVL,"REG_ADC_CONTROL:%x\n", HAL_ADC_READ32(REG_ADC_CONTROL));
+    
+    /* ADC compare value and compare method setting*/    
+    switch (AdcTempIdx) {
+        case ADC0_SEL:
+            AdcTempDat  =   HAL_ADC_READ32(REG_ADC_COMP_VALUE_L);
+            AdcTempDat  &=  ~(BIT_ADC_COMP_TH_0(0xFFFF));
+            AdcTempDat  |=  BIT_CTRL_ADC_COMP_TH_0(pHalAdcInitData->ADCCompTD);
+            HAL_ADC_WRITE32(REG_ADC_COMP_VALUE_L, AdcTempDat);
+            break;
+            
+        case ADC1_SEL:
+            AdcTempDat  =   HAL_ADC_READ32(REG_ADC_COMP_VALUE_L);
+            AdcTempDat  &=  ~(BIT_ADC_COMP_TH_1(0xFFFF));
+            AdcTempDat  |=  BIT_CTRL_ADC_COMP_TH_1(pHalAdcInitData->ADCCompTD);
+            HAL_ADC_WRITE32(REG_ADC_COMP_VALUE_L, AdcTempDat);
+            break;
+            
+        case ADC2_SEL:
+            AdcTempDat  =   HAL_ADC_READ32(REG_ADC_COMP_VALUE_H);
+            AdcTempDat  &=  ~(BIT_ADC_COMP_TH_2(0xFFFF));
+            AdcTempDat  |=  BIT_CTRL_ADC_COMP_TH_2(pHalAdcInitData->ADCCompTD);
+            HAL_ADC_WRITE32(REG_ADC_COMP_VALUE_H, AdcTempDat);
+            break;
+            
+        case ADC3_SEL:
+            AdcTempDat  =   HAL_ADC_READ32(REG_ADC_COMP_VALUE_H);
+            AdcTempDat  &=  ~(BIT_ADC_COMP_TH_3(0xFFFF));
+            AdcTempDat  |=  BIT_CTRL_ADC_COMP_TH_3(pHalAdcInitData->ADCCompTD);
+            HAL_ADC_WRITE32(REG_ADC_COMP_VALUE_H, AdcTempDat);
+            break;
+        default:
+            return _EXIT_FAILURE;
+    }
+
+    /* ADC compare mode setting */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_COMP_SET);
+    AdcTempDat  &=  (~(0x01 << pHalAdcInitData->ADCIdx));
+    AdcTempDat  |=  (BIT_CTRL_ADC_COMP_0_EN(pHalAdcInitData->ADCCompCtrl) << 
+                                                    pHalAdcInitData->ADCIdx);
+    HAL_ADC_WRITE32(REG_ADC_COMP_SET, AdcTempDat);
+
+    /* ADC audio mode set-up */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD0);
+    AdcTempDat  &=  ~(BIT_ADC_AUDIO_EN);
+    AdcTempDat  |=  BIT_CTRL_ADC_AUDIO_EN(pHalAdcInitData->ADCAudioEn);
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD0, AdcTempDat);
+
+    /* ADC enable manually setting */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD0);
+    AdcTempDat  &=  ~(BIT_ADC_EN_MANUAL);
+    AdcTempDat  |=  BIT_CTRL_ADC_EN_MANUAL(pHalAdcInitData->ADCEnManul);
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD0, AdcTempDat);
+
+
+    /* ADC analog parameter 0 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD0);
+    DBG_ADC_INFO("AD0:%x\n", AdcTempDat);
+    //AdcTempDat  |= (BIT0);
+    if (pHalAdcInitData->ADCInInput == 1){
+        AdcTempDat  &= (~BIT14);
+    }
+    else {
+        AdcTempDat  |= (BIT14);
+    }
+    AdcTempDat  &= (~(BIT3|BIT2));
+        
+    /* Adjust VCM for C-Cut*/
+#ifdef CONFIG_CHIP_C_CUT
+    AdcTempDat  |= (BIT22);
+#endif
+    
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD0, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD0);
+    DBG_ADC_INFO("AD0:%x\n", AdcTempDat);
+
+    /* ADC analog parameter 1 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD1);
+    AdcTempDat  &= (~BIT1);
+    AdcTempDat  |= (BIT2|BIT0);
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD1, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD1);
+    DBG_ADC_INFO("AD1:%x\n", AdcTempDat);
+        
+    /* ADC analog parameter 2 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD2);
+    DBG_ADC_INFO("AD2:%x\n", AdcTempDat);
+    AdcTempDat  = 0x67884400;
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD2, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD2);
+    DBG_ADC_INFO("AD2:%x\n", AdcTempDat);
+
+    /* ADC analog parameter 3 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD3);
+    DBG_ADC_INFO("AD3:%x\n", AdcTempDat);
+    AdcTempDat  =  0x77780039;
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD3, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD3);
+    DBG_ADC_INFO("AD3:%x\n", AdcTempDat);
+
+    /* ADC analog parameter 4 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD4);
+    DBG_ADC_INFO("AD4:%x\n", AdcTempDat);
+    AdcTempDat  =  0x0004d501;
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD4, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD4);
+    DBG_ADC_INFO("AD4:%x\n", AdcTempDat);
+
+    /* ADC analog parameter 5 */
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD5);
+    DBG_ADC_INFO("AD5:%x\n", AdcTempDat);
+    AdcTempDat  =  0x1E010800;
+    HAL_ADC_WRITE32(REG_ADC_ANAPAR_AD5, AdcTempDat);
+    AdcTempDat  =   HAL_ADC_READ32(REG_ADC_ANAPAR_AD5);
+    DBG_ADC_INFO("AD5:%x\n", AdcTempDat);
+
+    return _EXIT_SUCCESS;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CInit8195a
+//
+// Description:
+//		To initialize I2C module by using the given data.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the DeInit process.
+//          _EXIT_SUCCESS if the initialization succeeded.
+//          _EXIT_FAILURE if the initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-02.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalADCDeInit8195a(
+    IN  VOID    *Data
+)
+{
+    u32 AdcTempDat;
+
+    AdcTempDat      =   HAL_ADC_READ32(REG_ADC_POWER);
+    AdcTempDat      &=  ~(BIT_ADC_PWR_AUTO);
+    HAL_ADC_WRITE32(REG_ADC_POWER, AdcTempDat);
+
+    return _EXIT_SUCCESS;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CIntrCtrl8195a
+//
+// Description:
+//		Modify the I2C interrupt mask according to the given value
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the enable process.
+//          _EXIT_SUCCESS if the de-initialization succeeded.
+//          _EXIT_FAILURE if the de-initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalADCEnableRtl8195a(
+    IN  VOID    *Data
+){
+    PHAL_ADC_INIT_DAT   pHalAdcInitData     =   (PHAL_ADC_INIT_DAT)Data;
+    u32 AdcTempDat;
+	DBG_ADC_INFO("HalADCEnableRtl8195a\n");
+    
+    AdcTempDat      =   HAL_ADC_READ32(REG_ADC_POWER);
+	
+    AdcTempDat      &=  (~BIT_ADC_PWR_AUTO);
+    AdcTempDat      |= 0x02;
+    HAL_ADC_WRITE32(REG_ADC_POWER, AdcTempDat);
+	AdcTempDat      |= 0x04;
+    HAL_ADC_WRITE32(REG_ADC_POWER, AdcTempDat);
+	AdcTempDat      &= (~0x08);
+    HAL_ADC_WRITE32(REG_ADC_POWER, AdcTempDat);
+	
+	AdcTempDat  = (u32)HAL_ADC_READ32(REG_ADC_POWER);
+	DBG_ADC_INFO("HalADCEnableRtl8195a, power reg:%x\n",AdcTempDat);
+    return _EXIT_SUCCESS;
+}
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CIntrCtrl8195a
+//
+// Description:
+//		Modify the I2C interrupt mask according to the given value
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the enable process.
+//          _EXIT_SUCCESS if the de-initialization succeeded.
+//          _EXIT_FAILURE if the de-initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalADCIntrCtrl8195a(
+    IN  VOID    *Data
+){
+    PHAL_ADC_INIT_DAT   pHalAdcInitData     =   (PHAL_ADC_INIT_DAT)Data;
+    
+    HAL_ADC_WRITE32(REG_ADC_INTR_EN, pHalAdcInitData->ADCIntrMSK);
+
+    return _EXIT_SUCCESS;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CReceiveRtl8195a
+//
+// Description:
+//		Directly read one data byte a I2C data fifo.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The first data fifo content.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+u32
+HalADCReceiveRtl8195a(
+    IN  VOID    *Data
+){
+    u32 AdcTempDat;
+
+    AdcTempDat = HAL_ADC_READ32(REG_ADC_FIFO_READ);
+    
+    return (AdcTempDat);
+}
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CReadRegRtl8195a
+//
+// Description:
+//		Directly read a I2C register according to the register offset.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//		[in] I2CReg -
+//			The I2C register offset.
+//
+// Return:
+//		The register content in u32 format.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+u32
+HalADCReadRegRtl8195a(
+        IN  VOID    *Data,
+        IN  u8      I2CReg
+){
+    u32 AdcTempDat;
+
+    AdcTempDat  =   HAL_ADC_READ32(I2CReg);
+    return (AdcTempDat);
+}
+

lib/fwlib/rtl8195a/src/rtl8195a_dac.c

@@ -0,0 +1,269 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h" 
+#include "rtl8195a_dac.h"
+#include "hal_dac.h"
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalDACInit8195a
+//
+// Description:
+//		To initialize DAC module by using the given data.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The DAC parameter data struct.
+//
+// Return:
+//		The status of the DeInit process.
+//          _EXIT_SUCCESS if the initialization succeeded.
+//          _EXIT_FAILURE if the initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-15.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalDACInit8195a(
+    IN  VOID    *Data
+){
+    PHAL_DAC_INIT_DAT   pHalDacInitData = (PHAL_DAC_INIT_DAT)Data;
+    u32 DacTempDat;
+    u8  DacTempIdx      = pHalDacInitData->DACIdx;
+    
+    /* Enable DAC power cut */
+    DacTempDat  = HAL_DAC_READ32(0, REG_DAC_PWR_CTRL);
+    DacTempDat  |= BIT_DAC_PWR_AUTO;
+    
+    HAL_DAC_WRITE32(0, REG_DAC_PWR_CTRL, DacTempDat);
+
+    /* Disable DAC module first */
+    HAL_DAC_WRITE32(DacTempIdx, REG_DAC_CTRL, 0);
+
+    /* Setup DAC module */
+    DacTempDat  = 0;
+    DacTempDat  |= (BIT_CTRL_DAC_SPEED(pHalDacInitData->DACDataRate)            |
+                    BIT_CTRL_DAC_ENDIAN(pHalDacInitData->DACEndian)             |
+                    BIT_CTRL_DAC_FILTER_SETTLE(pHalDacInitData->DACFilterSet)   |
+                    BIT_CTRL_DAC_BURST_SIZE(pHalDacInitData->DACBurstSz)        |
+                    BIT_CTRL_DAC_DBG_SEL(pHalDacInitData->DACDbgSel)            |
+                    BIT_CTRL_DAC_DSC_DBG_SEL(pHalDacInitData->DACDscDbgSel)     |
+                    BIT_CTRL_DAC_BYPASS_DSC(pHalDacInitData->DACBPDsc)          |
+                    BIT_CTRL_DAC_DELTA_SIGMA(pHalDacInitData->DACDeltaSig));
+                    
+    HAL_DAC_WRITE32(DacTempIdx, REG_DAC_CTRL, DacTempDat);
+    
+    return _EXIT_SUCCESS;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CInit8195a
+//
+// Description:
+//		To initialize I2C module by using the given data.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the DeInit process.
+//          _EXIT_SUCCESS if the initialization succeeded.
+//          _EXIT_FAILURE if the initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-02.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalDACDeInit8195a(
+    IN  VOID    *Data
+){
+    PHAL_DAC_INIT_DAT   pHalDacInitData = (PHAL_DAC_INIT_DAT)Data;
+    u32 DacTempDat;
+
+    DacTempDat = HAL_DAC_READ32(pHalDacInitData->DACIdx, REG_DAC_CTRL);
+    DacTempDat &= (~BIT_DAC_FIFO_EN);
+    HAL_DAC_WRITE32(pHalDacInitData->DACIdx, REG_DAC_CTRL ,DacTempDat);
+    
+    return _EXIT_SUCCESS;
+}
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CIntrCtrl8195a
+//
+// Description:
+//		Modify the I2C interrupt mask according to the given value
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the enable process.
+//          _EXIT_SUCCESS if the de-initialization succeeded.
+//          _EXIT_FAILURE if the de-initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalDACEnableRtl8195a(
+    IN  VOID    *Data
+){
+    PHAL_DAC_INIT_DAT   pHalDacInitData = (PHAL_DAC_INIT_DAT)Data;
+    u32 DacTempDat;
+    u8  DacTempIdx      = pHalDacInitData->DACIdx;
+    
+    DacTempDat  = HAL_DAC_READ32(DacTempIdx, REG_DAC_CTRL);
+    DacTempDat  &= (~BIT_DAC_FIFO_EN);
+
+    DacTempDat  |= BIT_CTRL_DAC_FIFO_EN(pHalDacInitData->DACEn);
+    HAL_DAC_WRITE32(DacTempIdx, REG_DAC_CTRL, DacTempDat);
+
+    return _EXIT_SUCCESS;
+}
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CIntrCtrl8195a
+//
+// Description:
+//		Modify the I2C interrupt mask according to the given value
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the enable process.
+//          _EXIT_SUCCESS if the de-initialization succeeded.
+//          _EXIT_FAILURE if the de-initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+RTK_STATUS
+HalDACIntrCtrl8195a(
+    IN  VOID    *Data
+){
+    PHAL_DAC_INIT_DAT   pHalDacInitData = (PHAL_DAC_INIT_DAT)Data;
+
+    HAL_DAC_WRITE32(pHalDacInitData->DACIdx, REG_DAC_INTR_CTRL, pHalDacInitData->DACIntrMSK);
+    
+    return _EXIT_SUCCESS;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CReceiveRtl8195a
+//
+// Description:
+//		Directly read one data byte a I2C data fifo.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The first data fifo content.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+u8
+HalDACSendRtl8195a(
+    IN  VOID    *Data
+){
+
+
+    return (0);
+}
+
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalDACReadRegRtl8195a
+//
+// Description:
+//		
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The DAC parameter data struct.
+//		[in] I2CReg -
+//			The DAC register offset.
+//
+// Return:
+//		The DAC register content in u32 format.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-15.
+//
+//---------------------------------------------------------------------------------------------------
+u32
+HalDACReadRegRtl8195a(
+        IN  VOID    *Data,
+        IN  u8      I2CReg
+){
+    PHAL_DAC_INIT_DAT   pHalDacInitData = (PHAL_DAC_INIT_DAT)Data;
+
+    //DBG_8195A_DAC("dac read reg idx:%x\n",pHalDacInitData->DACIdx);
+    //DBG_8195A_DAC("dac read reg offset:%x\n",I2CReg);
+
+    return (u32)HAL_DAC_READ32(pHalDacInitData->DACIdx, I2CReg);
+}
+

lib/fwlib/rtl8195a/src/rtl8195a_gdma.c

@@ -0,0 +1,291 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h" 
+#include "rtl8195a_gdma.h"
+#include "hal_gdma.h"
+
+#ifndef CONFIG_CHIP_E_CUT
+BOOL
+HalGdmaChBlockSetingRtl8195a(
+    IN  VOID     *Data
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    PGDMA_CH_LLI_ELE pLliEle;
+    struct GDMA_CH_LLI *pGdmaChLli;
+    struct BLOCK_SIZE_LIST *pGdmaChBkLi;
+    u32 MultiBlockCount = pHalGdmaAdapter->MaxMuliBlock;
+    u32 CtlxLow, CtlxUp, CfgxLow, CfgxUp;
+    u8  GdmaIndex = pHalGdmaAdapter->GdmaIndex;
+    u8  ChNum = pHalGdmaAdapter->ChNum;
+    u32 ChEn = pHalGdmaAdapter->ChEn;
+    u8  GdmaChIsrBitmap = (ChEn & 0xFF);
+    u8  PendingIsrIndex;
+
+
+    pLliEle = pHalGdmaAdapter->pLlix->pLliEle;
+    pGdmaChLli = pHalGdmaAdapter->pLlix->pNextLli;
+    pGdmaChBkLi = pHalGdmaAdapter->pBlockSizeList;
+
+
+    //4 1) Check chanel is avaliable
+    if (HAL_GDMAX_READ32(GdmaIndex, REG_GDMA_CH_EN) & ChEn) {
+        //4 Disable Channel
+        DBG_GDMA_WARN("Channel had used; Disable Channel!!!!\n");
+
+        HalGdmaChDisRtl8195a(Data);
+
+    }
+
+    //4 2) Check if there are the pending isr; TFR, Block, Src Tran, Dst Tran,  Error
+    for (PendingIsrIndex=0; PendingIsrIndex<5;PendingIsrIndex++) {
+
+        u32 PendRaw, PendStstus;
+        PendRaw = HAL_GDMAX_READ32(GdmaIndex, 
+                                        (REG_GDMA_RAW_INT_BASE + PendingIsrIndex*8));
+        PendStstus = HAL_GDMAX_READ32(GdmaIndex, 
+                                        (REG_GDMA_STATUS_INT_BASE + PendingIsrIndex*8));
+
+        if ((PendRaw & GdmaChIsrBitmap) || (PendStstus & GdmaChIsrBitmap)) {
+            //4 Clear Pending Isr
+            HAL_GDMAX_WRITE32(GdmaIndex,
+                              (REG_GDMA_CLEAR_INT_BASE + PendingIsrIndex*8), 
+                              (PendStstus & (GdmaChIsrBitmap))
+                              );
+            
+        } 
+    }
+
+        //4 Fill in SARx register
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_SAR + ChNum*REG_GDMA_CH_OFF), 
+                      (pHalGdmaAdapter->ChSar)
+                      );
+    
+    
+        //4 Fill in DARx register
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_DAR + ChNum*REG_GDMA_CH_OFF), 
+                      (pHalGdmaAdapter->ChDar)
+                      );
+
+    
+
+    //4 3) Process CTLx
+    CtlxLow = HAL_GDMAX_READ32(GdmaIndex,
+                               (REG_GDMA_CH_CTL + ChNum*REG_GDMA_CH_OFF));
+
+        //4 Clear Config low register bits
+    CtlxLow &= (BIT_INVC_CTLX_LO_INT_EN &
+                BIT_INVC_CTLX_LO_DST_TR_WIDTH &
+                BIT_INVC_CTLX_LO_SRC_TR_WIDTH &
+                BIT_INVC_CTLX_LO_DINC &
+                BIT_INVC_CTLX_LO_SINC &
+                BIT_INVC_CTLX_LO_DEST_MSIZE &
+                BIT_INVC_CTLX_LO_SRC_MSIZE &
+                BIT_INVC_CTLX_LO_TT_FC &
+                BIT_INVC_CTLX_LO_LLP_DST_EN &
+                BIT_INVC_CTLX_LO_LLP_SRC_EN);
+
+    CtlxUp = HAL_GDMAX_READ32(GdmaIndex,
+                               (REG_GDMA_CH_CTL + ChNum*REG_GDMA_CH_OFF + 4));
+
+        //4 Clear Config upper register bits
+    CtlxUp &= (BIT_INVC_CTLX_UP_BLOCK_BS &
+               BIT_INVC_CTLX_UP_DONE);
+
+
+    CtlxLow = BIT_CTLX_LO_INT_EN(pHalGdmaAdapter->GdmaCtl.IntEn) |
+              BIT_CTLX_LO_DST_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.DstTrWidth) |
+              BIT_CTLX_LO_SRC_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.SrcTrWidth) |
+              BIT_CTLX_LO_DINC(pHalGdmaAdapter->GdmaCtl.Dinc) |
+              BIT_CTLX_LO_SINC(pHalGdmaAdapter->GdmaCtl.Sinc) |
+              BIT_CTLX_LO_DEST_MSIZE(pHalGdmaAdapter->GdmaCtl.DestMsize) |
+              BIT_CTLX_LO_SRC_MSIZE(pHalGdmaAdapter->GdmaCtl.SrcMsize) |
+              BIT_CTLX_LO_TT_FC(pHalGdmaAdapter->GdmaCtl.TtFc) |
+              BIT_CTLX_LO_LLP_DST_EN(pHalGdmaAdapter->GdmaCtl.LlpDstEn) |
+              BIT_CTLX_LO_LLP_SRC_EN(pHalGdmaAdapter->GdmaCtl.LlpSrcEn) |
+              CtlxLow;
+    
+    CtlxUp = BIT_CTLX_UP_BLOCK_BS(pGdmaChBkLi->BlockSize) |
+             BIT_CTLX_UP_DONE(pHalGdmaAdapter->GdmaCtl.Done) |
+             CtlxUp;
+
+        //4 Fill in CTLx register
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_CTL + ChNum*REG_GDMA_CH_OFF), 
+                      CtlxLow
+                      );
+    
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_CTL + ChNum*REG_GDMA_CH_OFF +4), 
+                      CtlxUp
+                      );
+   
+    //4 4) Program CFGx
+    
+    CfgxLow = HAL_GDMAX_READ32(GdmaIndex,
+                              (REG_GDMA_CH_CFG + ChNum*REG_GDMA_CH_OFF));
+
+    CfgxLow &= (BIT_INVC_CFGX_LO_CH_PRIOR &
+                BIT_INVC_CFGX_LO_CH_SUSP &
+                BIT_INVC_CFGX_LO_HS_SEL_DST &
+                BIT_INVC_CFGX_LO_HS_SEL_SRC &
+                BIT_INVC_CFGX_LO_LOCK_CH_L &
+                BIT_INVC_CFGX_LO_LOCK_B_L &
+                BIT_INVC_CFGX_LO_LOCK_CH &
+                BIT_INVC_CFGX_LO_LOCK_B &
+                BIT_INVC_CFGX_LO_RELOAD_SRC &
+                BIT_INVC_CFGX_LO_RELOAD_DST);
+
+    CfgxUp = HAL_GDMAX_READ32(GdmaIndex,
+                              (REG_GDMA_CH_CFG + ChNum*REG_GDMA_CH_OFF + 4));
+
+    CfgxUp &= (BIT_INVC_CFGX_UP_FIFO_MODE &
+               BIT_INVC_CFGX_UP_DS_UPD_EN &
+               BIT_INVC_CFGX_UP_SS_UPD_EN &
+               BIT_INVC_CFGX_UP_SRC_PER &
+               BIT_INVC_CFGX_UP_DEST_PER);
+
+    CfgxLow = BIT_CFGX_LO_CH_PRIOR(pHalGdmaAdapter->GdmaCfg.ChPrior) |
+              BIT_CFGX_LO_CH_SUSP(pHalGdmaAdapter->GdmaCfg.ChSusp) |
+              BIT_CFGX_LO_HS_SEL_DST(pHalGdmaAdapter->GdmaCfg.HsSelDst) |
+              BIT_CFGX_LO_HS_SEL_SRC(pHalGdmaAdapter->GdmaCfg.HsSelSrc) |
+              BIT_CFGX_LO_LOCK_CH_L(pHalGdmaAdapter->GdmaCfg.LockChL) |
+              BIT_CFGX_LO_LOCK_B_L(pHalGdmaAdapter->GdmaCfg.LockBL) |
+              BIT_CFGX_LO_LOCK_CH(pHalGdmaAdapter->GdmaCfg.LockCh) |
+              BIT_CFGX_LO_LOCK_B(pHalGdmaAdapter->GdmaCfg.LockB) |
+              BIT_CFGX_LO_RELOAD_SRC(pHalGdmaAdapter->GdmaCfg.ReloadSrc) |
+              BIT_CFGX_LO_RELOAD_DST(pHalGdmaAdapter->GdmaCfg.ReloadDst) |
+              CfgxLow;
+
+    CfgxUp = BIT_CFGX_UP_FIFO_MODE(pHalGdmaAdapter->GdmaCfg.FifoMode) |
+             BIT_CFGX_UP_DS_UPD_EN(pHalGdmaAdapter->GdmaCfg.DsUpdEn) |
+             BIT_CFGX_UP_SS_UPD_EN(pHalGdmaAdapter->GdmaCfg.SsUpdEn) |
+             BIT_CFGX_UP_SRC_PER(pHalGdmaAdapter->GdmaCfg.SrcPer) |
+             BIT_CFGX_UP_DEST_PER(pHalGdmaAdapter->GdmaCfg.DestPer) |
+             CfgxUp;
+
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_CFG + ChNum*REG_GDMA_CH_OFF), 
+                      CfgxLow
+                      );
+    
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_CFG + ChNum*REG_GDMA_CH_OFF +4), 
+                      CfgxUp
+                      );
+    
+    
+
+    //4 Check 4 Bytes Alignment
+    if ((u32)(pLliEle) & 0x3) {
+        DBG_GDMA_WARN("LLi Addr: 0x%x not 4 bytes alignment!!!!\n", 
+                        pHalGdmaAdapter->pLli);
+        return _FALSE;
+    }
+    
+    HAL_GDMAX_WRITE32(GdmaIndex,
+                      (REG_GDMA_CH_LLP + ChNum*REG_GDMA_CH_OFF), 
+                      pLliEle
+                      );
+
+    //4 Update the first llp0
+    pLliEle->CtlxLow = CtlxLow;
+    pLliEle->CtlxUp = CtlxUp;
+    pLliEle->Llpx = (u32)pGdmaChLli->pLliEle;
+    DBG_GDMA_INFO("Block Count %d\n", MultiBlockCount);
+
+    pGdmaChBkLi = pGdmaChBkLi->pNextBlockSiz;
+
+    while (MultiBlockCount > 1) {
+        MultiBlockCount--;
+        DBG_GDMA_INFO("Block Count %d\n", MultiBlockCount);
+        pLliEle = pGdmaChLli->pLliEle;
+
+        if (NULL == pLliEle) {
+            DBG_GDMA_ERR("pLliEle Null Point!!!!!\n");
+            return _FALSE;
+        }
+
+        //4 Clear the last element llp enable bit
+        if (1 == MultiBlockCount) {
+            if (((pHalGdmaAdapter->Rsvd4to7) & 0x01) == 1){
+                CtlxLow &= (BIT_INVC_CTLX_LO_LLP_DST_EN &
+                       BIT_INVC_CTLX_LO_LLP_SRC_EN);
+            }            
+        }
+        //4 Update block size for transfer
+        CtlxUp &= (BIT_INVC_CTLX_UP_BLOCK_BS);
+        CtlxUp |= BIT_CTLX_UP_BLOCK_BS(pGdmaChBkLi->BlockSize);
+
+        //4 Update tje Lli and Block size list point to next llp
+        pGdmaChLli = pGdmaChLli->pNextLli;
+        pGdmaChBkLi = pGdmaChBkLi->pNextBlockSiz;
+
+        //4 Updatethe Llpx context
+        pLliEle->CtlxLow = CtlxLow;
+        pLliEle->CtlxUp = CtlxUp;        
+        pLliEle->Llpx = (u32)(pGdmaChLli->pLliEle);
+        
+    }
+
+    return _TRUE;
+}
+
+u32
+HalGdmaQueryDArRtl8195a(
+    IN  VOID     *Data
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    u8  GdmaIndex = pHalGdmaAdapter->GdmaIndex;
+    u8  ChNum = pHalGdmaAdapter->ChNum;
+    u32 dar;
+    
+    dar = HAL_GDMAX_READ32(GdmaIndex,
+                               (REG_GDMA_CH_DAR + ChNum*REG_GDMA_CH_OFF));
+
+    return dar;
+}
+
+u32
+HalGdmaQuerySArRtl8195a(
+    IN  VOID     *Data
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    u8  GdmaIndex = pHalGdmaAdapter->GdmaIndex;
+    u8  ChNum = pHalGdmaAdapter->ChNum;
+    u32 dar;
+    
+    dar = HAL_GDMAX_READ32(GdmaIndex,
+                               (REG_GDMA_CH_SAR + ChNum*REG_GDMA_CH_OFF));
+
+    return dar;
+}
+
+BOOL
+HalGdmaQueryChEnRtl8195a (
+    IN  VOID              *Data
+)
+{
+    
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = Data;
+
+    if (HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, REG_GDMA_CH_EN) & (pHalGdmaAdapter->ChEn)) {
+        return 1;
+    } else {
+        return 0;
+    }    
+}
+
+#endif

lib/fwlib/rtl8195a/src/rtl8195a_gpio.c

@@ -0,0 +1,53 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+#include "hal_gpio.h"
+#include "rtl8195a_gpio.h"
+#include "gpio_irq_api.h"
+
+extern PHAL_GPIO_ADAPTER _pHAL_Gpio_Adapter;
+
+/**
+  * @brief  Clear the pending interrupt of a specified pin
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval None
+  */
+HAL_Status
+HAL_GPIO_ClearISR_8195a(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    u8 port_num;
+    u8 pin_num;
+    HAL_GPIO_PIN_MODE pin_mode;
+
+    port_num = HAL_GPIO_GET_PORT_BY_NAME(GPIO_Pin->pin_name);
+    pin_num = HAL_GPIO_GET_PIN_BY_NAME(GPIO_Pin->pin_name);
+    pin_mode = GPIO_Pin->pin_mode;
+
+    if ((pin_mode & HAL_GPIO_PIN_INT_MODE)==0 || (port_num != GPIO_PORT_A)) {
+        DBG_GPIO_WARN("HAL_GPIO_ClearISR_8195a: This pin(%x:%x) is'nt an interrupt pin\n", GPIO_Pin->pin_name, GPIO_Pin->pin_mode);
+        return HAL_ERR_PARA;
+    }
+
+    if (GPIO_Lock() != HAL_OK) {
+        return HAL_BUSY;
+    }
+
+    // Clear pending interrupt before unmask it
+    HAL_WRITE32(GPIO_REG_BASE, GPIO_PORTA_EOI, (1<<pin_num));
+
+    GPIO_UnLock();
+    return HAL_OK;
+    
+}
+

lib/fwlib/rtl8195a/src/rtl8195a_i2c.c

@@ -0,0 +1,408 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+
+/* Used only for A~C Version */
+#ifndef CONFIG_CHIP_E_CUT
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CSendRtl8195a
+//
+// Description:
+//		Send one byte to the I2C internal fifo, it will generate START and STOP bit 
+//         automatically.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		_EXIT_SUCCESS if the sending succeeded.
+//		_EXIT_FAILURE if the sending failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+HAL_Status
+HalI2CSendRtl8195a_Patch(
+    IN  VOID    *Data
+){
+    PHAL_I2C_INIT_DAT pHalI2CInitData = (PHAL_I2C_INIT_DAT)Data;
+    u8  I2CIdx  = pHalI2CInitData->I2CIdx;
+    u8  *pDat   = pHalI2CInitData->I2CRWData;
+    u8  I2CCmd  = pHalI2CInitData->I2CCmd;
+    u8  I2CStop = pHalI2CInitData->I2CStop;
+    u8  I2CReSTR= pHalI2CInitData->I2CReSTR;
+ 
+    DBG_I2C_INFO("HalI2CSendRtl8195a\n");
+    DBG_I2C_INFO("I2C Index: %x\n",I2CIdx);
+
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_DATA_CMD, 
+                    *(pDat) |
+                    BIT_CTRL_IC_DATA_CMD_RESTART(I2CReSTR)|
+                    BIT_CTRL_IC_DATA_CMD_CMD(I2CCmd) |
+                    BIT_CTRL_IC_DATA_CMD_STOP(I2CStop));
+    
+    return (HAL_OK);
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CInit8195a
+//
+// Description:
+//		To initialize I2C module by using the given data.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the DeInit process.
+//          _EXIT_SUCCESS if the initialization succeeded.
+//          _EXIT_FAILURE if the initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-04-02.
+//
+//---------------------------------------------------------------------------------------------------
+HAL_Status
+HalI2CInit8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2C_INIT_DAT pHalI2CInitData = (PHAL_I2C_INIT_DAT)Data;
+
+    u8  Master;
+    u8  I2CIdx;
+    u8  SpdMd;
+    u8  AddrMd;
+    u8  ReSTR;
+    u8  StartByte;
+    u8  Specical;
+    u8  GC;
+    u16 I2CAckAddr;
+    u16 SdaHd;
+    u8  SdaSetup;
+    u8  RXTL;
+    u8  TXTL;
+    u8  SlvNoAck;
+    u32 INTRMsk;
+    u8  TxDMARqLv;
+    u8  RxDMARqLv;
+    
+    /* Get the I2C parameters*/
+    I2CIdx      = pHalI2CInitData->I2CIdx;
+    SpdMd       = pHalI2CInitData->I2CSpdMod;
+    AddrMd      = pHalI2CInitData->I2CAddrMod;
+    I2CAckAddr  = pHalI2CInitData->I2CAckAddr;
+    Master      = pHalI2CInitData->I2CMaster;
+    SdaHd       = pHalI2CInitData->I2CSdaHd;
+    SdaSetup    = pHalI2CInitData->I2CSetup;
+    
+    ReSTR       = pHalI2CInitData->I2CReSTR;
+    GC          = pHalI2CInitData->I2CGC;
+    StartByte   = pHalI2CInitData->I2CStartB;
+    SlvNoAck    = pHalI2CInitData->I2CSlvNoAck;
+    
+    RXTL        = pHalI2CInitData->I2CRXTL;
+    TXTL        = pHalI2CInitData->I2CTXTL;
+
+    TxDMARqLv   = pHalI2CInitData->I2CTxDMARqLv;
+    RxDMARqLv   = pHalI2CInitData->I2CRxDMARqLv;
+    
+    /* Disable the IC first */
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_ENABLE,BIT_CTRL_IC_ENABLE(0));
+
+    /* Master case*/
+    if (Master) {
+        /*RESTART MUST be set in these condition in Master mode. 
+               But it might be NOT compatible in old slaves.*/
+        if ((AddrMd == I2C_ADDR_10BIT) || (SpdMd == I2C_HS_MODE))
+            ReSTR = 1;
+            
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_CON, 
+                            (BIT_CTRL_IC_CON_IC_SLAVE_DISABLE(1) |
+                             BIT_CTRL_IC_CON_IC_RESTART_EN(ReSTR) |
+                             BIT_CTRL_IC_CON_IC_10BITADDR_MASTER(AddrMd) |
+                             BIT_CTRL_IC_CON_SPEED(SpdMd) |                            
+                             BIT_CTRL_IC_CON_MASTER_MODE(Master)));
+    
+        DBG_I2C_INFO("Init master, IC_CON%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_CON, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_CON));
+
+
+        /* To set target addr.*/
+        Specical = 0;
+        if ((GC!=0) || (StartByte!=0))
+            Specical = 1;
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_TAR,
+                            (BIT_CTRL_IC_TAR_IC_10BITADDR_MASTER(AddrMd) |
+                             BIT_CTRL_IC_TAR_SPECIAL(Specical)           |
+                             BIT_CTRL_IC_TAR_GC_OR_START(StartByte)      |
+                             BIT_CTRL_IC_TAR(I2CAckAddr)));
+
+        /* To Set I2C clock*/
+        HalI2CSetCLKRtl8195a_Patch(pHalI2CInitData);
+        
+
+        DBG_I2C_INFO("Init master, IC_TAR%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_TAR, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_TAR));
+
+    }    /*if (Master)*/
+    else {         
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_CON,
+                            BIT_CTRL_IC_CON_IC_10BITADDR_SLAVE(AddrMd) |
+                            BIT_CTRL_IC_CON_IC_SLAVE_DISABLE(Master) |
+                            BIT_CTRL_IC_CON_SPEED(SpdMd)|
+                            BIT_CTRL_IC_CON_MASTER_MODE(Master));
+
+        DBG_I2C_INFO("Init slave, IC_CON%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_CON, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_CON));
+
+
+        /* To set  slave addr. */
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SAR,BIT_CTRL_IC_SAR(I2CAckAddr));
+
+        DBG_I2C_INFO("Init slave, IC_SAR%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_SAR, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_SAR));
+
+
+        /* To set slave no ack */
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SLV_DATA_NACK_ONLY,BIT_CTRL_IC_SLV_DATA_NACK_ONLY(SlvNoAck));
+        
+        /* Set ack general call. */
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_ACK_GENERAL_CALL,BIT_CTRL_IC_ACK_GENERAL_CALL(pHalI2CInitData->I2CSlvAckGC));
+
+        
+
+        DBG_I2C_INFO("Init slave, I2C_IC_ACK_GC%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_ACK_GENERAL_CALL, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_ACK_GENERAL_CALL));
+
+        /* to set SDA hold time */
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SDA_HOLD,BIT_CTRL_IC_SDA_HOLD(SdaHd));
+        //4 
+        /* to set SDA setup time */
+        HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SDA_SETUP,BIT_CTRL_IC_SDA_SETUP(SdaSetup));
+    }
+
+    /* To set TX_Empty Level */
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_TX_TL,TXTL);
+    
+    /* To set RX_Full Level */
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_RX_TL,RXTL);
+
+    /* To set TX/RX FIFO level */
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_DMA_TDLR,TxDMARqLv);
+    HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_DMA_RDLR,RxDMARqLv);
+    
+
+    DBG_I2C_INFO("Init i2c dev, I2C_IC_DMA_TDLR%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_DMA_TDLR, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_DMA_TDLR));
+    DBG_I2C_INFO("Init i2c dev, I2C_IC_DMA_RDLR%d[%2x]: %x\n", I2CIdx, REG_DW_I2C_IC_DMA_RDLR, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_DMA_RDLR));
+
+
+    /*I2C Clear all interrupts first*/
+    HalI2CClrAllIntrRtl8195a(pHalI2CInitData);
+
+    /*I2C Disable all interrupts first*/
+    INTRMsk = pHalI2CInitData->I2CIntrMSK;
+    pHalI2CInitData->I2CIntrMSK = 0;
+    HalI2CIntrCtrl8195a(pHalI2CInitData);
+    pHalI2CInitData->I2CIntrMSK = INTRMsk;
+    
+    return HAL_OK;
+}
+
+//---------------------------------------------------------------------------------------------------
+//Function Name:
+//		HalI2CSetCLKRtl8195a
+//
+// Description:
+//		To set I2C bus clock rate.
+//
+// Arguments:
+//		[in] VOID    *Data -
+//			The I2C parameter data struct.
+//
+// Return:
+//		The status of the enable process.
+//          _EXIT_SUCCESS if the de-initialization succeeded.
+//          _EXIT_FAILURE if the de-initialization failed.
+//
+// Note:
+//		None
+//
+// See Also:
+//		NA
+//
+// Author:
+// 		By Jason Deng, 2014-02-18.
+//
+//---------------------------------------------------------------------------------------------------
+HAL_Status
+HalI2CSetCLKRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2C_INIT_DAT pHalI2CInitData = (PHAL_I2C_INIT_DAT)Data;
+    u8  SpdMd = pHalI2CInitData->I2CSpdMod;
+    u32 I2CClk = pHalI2CInitData->I2CClk;
+    u8  I2CIdx = pHalI2CInitData->I2CIdx;
+    u32 ICHLcnt;
+    u32 ICHtime;
+    u32 ICLtime;
+
+    /* Get the IC-Clk setting first for the following process*/
+#ifdef CONFIG_FPGA
+    u32 IcClk = SYSTEM_CLK/1000000;
+#else
+    u32 IcClk;
+    u32 ClkSELTmp = 0;
+    u32 CpuClkTmp = 0;
+    
+    #if defined(CONFIG_CHIP_A_CUT)
+        CpuClkTmp = StartupHalGetCpuClk();
+    #elif  (defined(CONFIG_CHIP_B_CUT) || defined(CONFIG_CHIP_C_CUT))
+        CpuClkTmp = HalGetCpuClk();
+    #endif
+    
+    DBG_I2C_INFO("%s, CPU Clk:%x\n",__func__, CpuClkTmp);
+    
+    ClkSELTmp = HAL_READ32(PERI_ON_BASE, REG_PESOC_CLK_SEL);
+    ClkSELTmp &= (~(BIT_PESOC_PERI_SCLK_SEL(3)));
+    HAL_WRITE32(PERI_ON_BASE,REG_PESOC_CLK_SEL,ClkSELTmp);
+    IcClk = (CpuClkTmp/1000000)>>1;
+
+#if 0    
+    if ((I2CClk > 0) && (I2CClk <= 400)) {
+        ClkSELTmp &= (~(BIT_PESOC_PERI_SCLK_SEL(3)));
+        HAL_WRITE32(PERI_ON_BASE,REG_PESOC_CLK_SEL,ClkSELTmp);
+        IcClk = ClkSELTmp/1000000;     /*actually it's 12.5MHz*/
+    }
+    else {
+        ClkSELTmp &= (~(BIT_PESOC_PERI_SCLK_SEL(3)));
+        HAL_WRITE32(PERI_ON_BASE,REG_PESOC_CLK_SEL,ClkSELTmp);
+        IcClk = 100;    
+    }
+#endif
+#endif
+
+    switch (SpdMd)  
+    {
+        case I2C_SS_MODE:
+        {
+            ICHtime = ((1000000/I2CClk)*I2C_SS_MIN_SCL_HTIME)/(I2C_SS_MIN_SCL_HTIME+I2C_SS_MIN_SCL_LTIME);
+            ICLtime = ((1000000/I2CClk)*I2C_SS_MIN_SCL_LTIME)/(I2C_SS_MIN_SCL_HTIME+I2C_SS_MIN_SCL_LTIME);
+            
+            ICHLcnt = (ICHtime * IcClk)/1000;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SS_SCL_HCNT,ICHLcnt);
+            
+
+            DBG_I2C_INFO("IC_SS_SCL_HCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_SS_SCL_HCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_SS_SCL_HCNT));
+
+
+            ICHLcnt = (ICLtime * IcClk)/1000;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SS_SCL_LCNT,ICHLcnt);
+
+
+            DBG_I2C_INFO("IC_SS_SCL_LCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_SS_SCL_LCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_SS_SCL_LCNT));
+
+            break;
+        }
+        
+        case I2C_FS_MODE:
+        {
+            ICHtime = ((1000000/I2CClk)*I2C_FS_MIN_SCL_HTIME)/(I2C_FS_MIN_SCL_HTIME+I2C_FS_MIN_SCL_LTIME);
+            ICLtime = ((1000000/I2CClk)*I2C_FS_MIN_SCL_LTIME)/(I2C_FS_MIN_SCL_HTIME+I2C_FS_MIN_SCL_LTIME);
+            
+            ICHLcnt = (ICHtime * IcClk)/1000;
+            if (ICHLcnt>4)/*this part is according to the fine-tune result*/
+                ICHLcnt -= 4;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_FS_SCL_HCNT,ICHLcnt);
+            
+
+            DBG_I2C_INFO("IC_FS_SCL_HCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_FS_SCL_HCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_FS_SCL_HCNT));
+
+            
+            ICHLcnt = (ICLtime * IcClk)/1000;
+            if (ICHLcnt>3)/*this part is according to the fine-tune result*/
+                ICHLcnt -= 3;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_FS_SCL_LCNT,ICHLcnt);
+            
+
+            DBG_I2C_INFO("IC_FS_SCL_LCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_FS_SCL_LCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_FS_SCL_LCNT));
+
+            break;
+        }
+
+        case I2C_HS_MODE:
+        {
+            ICHLcnt = 400;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SS_SCL_HCNT,ICHLcnt);
+            
+            ICHLcnt = 470;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_SS_SCL_LCNT,ICHLcnt);
+            
+            ICHLcnt = 60;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_FS_SCL_HCNT,ICHLcnt);
+            
+            ICHLcnt = 130;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_FS_SCL_LCNT,ICHLcnt);
+
+            ICHtime = ((1000000/I2CClk)*I2C_HS_MIN_SCL_HTIME_100)/(I2C_HS_MIN_SCL_HTIME_100+I2C_HS_MIN_SCL_LTIME_100);
+            ICLtime = ((1000000/I2CClk)*I2C_HS_MIN_SCL_LTIME_100)/(I2C_HS_MIN_SCL_HTIME_100+I2C_HS_MIN_SCL_LTIME_100);
+
+            
+            DBG_I2C_INFO("ICHtime:%x\n",ICHtime);
+            DBG_I2C_INFO("ICLtime:%x\n",ICLtime);
+
+
+            ICHLcnt = (ICHtime * IcClk)/1000;
+            if (ICHLcnt>8)/*this part is according to the fine-tune result*/
+                ICHLcnt -= 3;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_HS_SCL_HCNT,ICHLcnt);
+            
+            
+            DBG_I2C_INFO("IC_HS_SCL_HCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_HS_SCL_HCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_HS_SCL_HCNT));
+
+
+            ICHLcnt = (ICLtime * IcClk)/1000;
+            if (ICHLcnt>6)/*this part is according to the fine-tune result*/
+                ICHLcnt -= 6;
+            HAL_I2C_WRITE32(I2CIdx,REG_DW_I2C_IC_HS_SCL_LCNT,ICHLcnt);
+            
+
+            DBG_I2C_INFO("IC_HS_SCL_LCNT%d[%2x]: %x\n", I2CIdx,
+                        REG_DW_I2C_IC_HS_SCL_LCNT, HAL_I2C_READ32(I2CIdx,REG_DW_I2C_IC_HS_SCL_LCNT));
+
+
+            break;
+        }    
+
+        default:
+            break;
+    }
+
+    return HAL_OK;
+}
+#endif

lib/fwlib/rtl8195a/src/rtl8195a_i2s.c

@@ -0,0 +1,395 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h" 
+#include "rtl8195a_i2s.h"
+#include "hal_i2s.h"
+
+extern void *
+_memset( void *s, int c, SIZE_T n );
+
+RTK_STATUS
+HalI2SInitRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+
+    u8  I2SIdx;
+    //u8  I2SEn;
+    u8  I2SMaster;
+    u8  I2SWordLen;
+    u8  I2SChNum;
+    u8  I2SPageNum;
+    u16 I2SPageSize;
+    u16 I2SRate;
+    u32 I2STxIntrMSK;
+    u32 I2SRxIntrMSK;
+    u8  I2STRxAct;
+    u8  *I2STxData;
+    u8  *I2SRxData;
+
+    u32 Tmp;
+
+    I2SIdx         = pHalI2SInitData->I2SIdx;
+    //I2SEn          = pHalI2SInitData->I2SEn;
+    I2SMaster      = pHalI2SInitData->I2SMaster;
+    I2SWordLen     = pHalI2SInitData->I2SWordLen;
+    I2SChNum       = pHalI2SInitData->I2SChNum;
+    I2SPageNum     = pHalI2SInitData->I2SPageNum;
+    I2SPageSize    = pHalI2SInitData->I2SPageSize;
+    I2SRate        = pHalI2SInitData->I2SRate;
+    I2STRxAct      = pHalI2SInitData->I2STRxAct;
+    I2STxData      = pHalI2SInitData->I2STxData;
+    I2SRxData      = pHalI2SInitData->I2SRxData;
+
+
+    /* Disable the I2S first, and reset to default */
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, BIT_CTRL_CTLX_I2S_EN(0) | 
+                                         BIT_CTRL_CTLX_I2S_SW_RSTN(1));
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, BIT_CTRL_CTLX_I2S_EN(0) | 
+                                         BIT_CTRL_CTLX_I2S_SW_RSTN(0));
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, BIT_CTRL_CTLX_I2S_EN(0) | 
+                                         BIT_CTRL_CTLX_I2S_SW_RSTN(1));
+
+    Tmp = HAL_I2S_READ32(I2SIdx, REG_I2S_CTL);
+    Tmp |= BIT_CTRL_CTLX_I2S_ENDIAN_SWAP(1);
+
+    if (I2SRate&0x10) 
+    {
+        Tmp |= BIT_CTRL_CTLX_I2S_CLK_SRC(1);
+    }
+
+    Tmp |= (BIT_CTRL_CTLX_I2S_WL(I2SWordLen) | BIT_CTRL_CTLX_I2S_CH_NUM(I2SChNum) |
+            BIT_CTRL_CTLX_I2S_SLAVE_MODE(I2SMaster) | BIT_CTRL_CTLX_I2S_TRX_ACT(I2STRxAct));
+    /* set 44.1khz clock source, word length, channel number, master or slave, trx act */
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, Tmp);
+
+    Tmp = BIT_CTRL_SETTING_I2S_PAGE_SZ(I2SPageSize) | BIT_CTRL_SETTING_I2S_PAGE_NUM(I2SPageNum) |
+          BIT_CTRL_SETTING_I2S_SAMPLE_RATE(I2SRate);
+    /* set page size, page number, sample rate */
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_SETTING, Tmp);
+
+    /* need tx rx buffer? need rx page own bit */
+    if (I2STxData != NULL) {
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_TX_PAGE_PTR, (u32)I2STxData);
+    }
+
+    if (I2SRxData != NULL) {
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_RX_PAGE_PTR, (u32)I2SRxData);
+    }
+
+	pHalI2SInitData->I2STxIdx = 0;
+	pHalI2SInitData->I2SRxIdx = 0;
+    pHalI2SInitData->I2SHWTxIdx = 0;
+    pHalI2SInitData->I2SHWRxIdx = 0;
+    /* I2S Clear all interrupts first */
+    HalI2SClrAllIntrRtl8195a(pHalI2SInitData);
+
+    /* I2S Disable all interrupts first */
+    I2STxIntrMSK   = pHalI2SInitData->I2STxIntrMSK;
+    I2SRxIntrMSK   = pHalI2SInitData->I2SRxIntrMSK;
+    pHalI2SInitData->I2STxIntrMSK = 0;
+    pHalI2SInitData->I2SRxIntrMSK = 0;
+    HalI2SIntrCtrlRtl8195a(pHalI2SInitData);
+    pHalI2SInitData->I2STxIntrMSK = I2STxIntrMSK;
+    pHalI2SInitData->I2SRxIntrMSK = I2SRxIntrMSK;
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetRateRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_CTL);    
+    reg_value &= ~(BIT_MASK_CTLX_I2S_CLK_SRC << BIT_SHIFT_CTLX_I2S_CLK_SRC);
+    if (pHalI2SInitData->I2SRate&0x10) 
+    {
+        reg_value |= BIT_CTRL_CTLX_I2S_CLK_SRC(1);
+    }
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, reg_value);
+    
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_SETTING);
+    reg_value &= ~(BIT_MASK_SETTING_I2S_SAMPLE_RATE << BIT_SHIFT_SETTING_I2S_SAMPLE_RATE);
+    reg_value |= BIT_CTRL_SETTING_I2S_SAMPLE_RATE(pHalI2SInitData->I2SRate);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_SETTING, reg_value);
+    
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetWordLenRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_CTL);
+    reg_value &= ~(BIT_MASK_CTLX_I2S_WL << BIT_SHIFT_CTLX_I2S_WL);
+    reg_value |= BIT_CTRL_CTLX_I2S_WL(pHalI2SInitData->I2SWordLen);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, reg_value);
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetChNumRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_CTL);
+    reg_value &= ~(BIT_MASK_CTLX_I2S_CH_NUM << BIT_SHIFT_CTLX_I2S_CH_NUM);
+    reg_value |= BIT_CTRL_CTLX_I2S_CH_NUM(pHalI2SInitData->I2SChNum);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, reg_value);
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetPageNumRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_SETTING);
+    reg_value &= ~(BIT_MASK_SETTING_I2S_PAGE_NUM << BIT_SHIFT_SETTING_I2S_PAGE_NUM);
+    reg_value |= BIT_CTRL_SETTING_I2S_PAGE_NUM(pHalI2SInitData->I2SPageNum);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_SETTING, reg_value);
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetPageSizeRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_SETTING);
+    reg_value &= ~(BIT_MASK_SETTING_I2S_PAGE_SZ << BIT_SHIFT_SETTING_I2S_PAGE_SZ);
+    reg_value |= BIT_CTRL_SETTING_I2S_PAGE_SZ(pHalI2SInitData->I2SPageSize);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_SETTING, reg_value);
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetDirectionRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_CTL);
+    reg_value &= ~(BIT_MASK_CTLX_I2S_TRX_ACT << BIT_SHIFT_CTLX_I2S_TRX_ACT);
+    reg_value |= BIT_CTRL_CTLX_I2S_TRX_ACT(pHalI2SInitData->I2STRxAct);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_CTL, reg_value);
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SSetDMABufRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8 I2SIdx;
+    u32 reg_value;
+    u32 page_num;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    reg_value = HAL_I2S_READ32(I2SIdx, REG_I2S_SETTING);
+    reg_value &= ~(BIT_MASK_SETTING_I2S_PAGE_SZ << BIT_SHIFT_SETTING_I2S_PAGE_SZ);
+    reg_value &= ~(BIT_MASK_SETTING_I2S_PAGE_NUM << BIT_SHIFT_SETTING_I2S_PAGE_NUM);
+    reg_value |= BIT_CTRL_SETTING_I2S_PAGE_SZ(pHalI2SInitData->I2SPageSize);
+    reg_value |= BIT_CTRL_SETTING_I2S_PAGE_NUM(pHalI2SInitData->I2SPageNum);
+    HAL_I2S_WRITE32(I2SIdx, REG_I2S_SETTING, reg_value);
+
+    page_num = pHalI2SInitData->I2SPageNum + 1;
+    if (pHalI2SInitData->I2STxData) {
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_TX_PAGE_PTR, (uint32_t)pHalI2SInitData->I2STxData);
+        pHalI2SInitData->I2STxIntrMSK  = (1<<page_num) - 1;
+    } else {
+        pHalI2SInitData->I2STxIntrMSK = 0;
+    }
+
+    if (pHalI2SInitData->I2SRxData) {
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_RX_PAGE_PTR, (uint32_t)pHalI2SInitData->I2SRxData);
+        pHalI2SInitData->I2SRxIntrMSK  = (1<<page_num) - 1;
+    } else {
+        pHalI2SInitData->I2SRxIntrMSK  = 0;
+        
+    }
+
+    // According to the page number to modify the ISR mask
+    HalI2SIntrCtrlRtl8195a(pHalI2SInitData);
+
+    return _EXIT_SUCCESS;
+}
+
+u8
+HalI2SGetTxPageRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+
+    u8  I2SIdx;
+	u16 I2STxIdx = pHalI2SInitData->I2STxIdx;
+    u32 reg;
+    
+    I2SIdx = pHalI2SInitData->I2SIdx;
+    
+	reg = HAL_I2S_READ32(I2SIdx, REG_I2S_TX_PAGE0_OWN+(I2STxIdx<<2));
+    if ((reg & (1<<31)) == 0) {
+        return I2STxIdx;
+    } else {
+        return 0xFF;
+    }
+}
+
+u8
+HalI2SGetRxPageRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+
+    u8  I2SIdx;
+	u16 I2SRxIdx = pHalI2SInitData->I2SRxIdx;
+    u32 reg;
+    
+    I2SIdx = pHalI2SInitData->I2SIdx;
+    
+	reg = HAL_I2S_READ32(I2SIdx, REG_I2S_RX_PAGE0_OWN+(I2SRxIdx << 2));
+    if ((reg & (1<<31)) == 0) {
+        return I2SRxIdx;
+    } else {
+        return 0xFF;
+    }
+}
+
+RTK_STATUS
+HalI2SPageSendRtl8195a(
+    IN  VOID    *Data,
+	IN  u8      PageIdx
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+	u16 I2STxIdx = pHalI2SInitData->I2STxIdx;
+	u8  I2SPageNum = pHalI2SInitData->I2SPageNum;
+    u8  I2SIdx;
+
+    if (I2STxIdx != PageIdx) {
+        DBG_I2S_ERR("HalI2SPageSendRtl8195a: UnExpected Page Index. TxPage=%d, Expected:%d\r\n", 
+            PageIdx, I2STxIdx);
+    }
+    
+    I2SIdx = pHalI2SInitData->I2SIdx;
+    
+	HAL_I2S_WRITE32(I2SIdx, REG_I2S_TX_PAGE0_OWN+4*PageIdx, 1<<31);
+    I2STxIdx = PageIdx+1;
+    if (I2STxIdx > I2SPageNum) {
+        I2STxIdx = 0;
+    }
+    pHalI2SInitData->I2STxIdx = I2STxIdx;
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SPageRecvRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+	u16 I2SRxIdx = pHalI2SInitData->I2SRxIdx;
+	u8  I2SPageNum = pHalI2SInitData->I2SPageNum;
+    u32 reg;
+    u8  I2SIdx;
+
+    I2SIdx = pHalI2SInitData->I2SIdx;
+	reg = HAL_I2S_READ32(I2SIdx, REG_I2S_RX_PAGE0_OWN+(I2SRxIdx << 2));
+    if ((reg & (1<<31)) != 0) {
+        DBG_I2S_ERR("HalI2SPageRecvRtl8195a: No Idle Rx Page\r\n");
+        return _EXIT_FAILURE;
+    }
+
+	HAL_I2S_WRITE32(I2SIdx, REG_I2S_RX_PAGE0_OWN+(I2SRxIdx<<2), 1<<31);
+    I2SRxIdx += 1;
+    if (I2SRxIdx > I2SPageNum) {
+        I2SRxIdx = 0;
+    }
+    pHalI2SInitData->I2SRxIdx = I2SRxIdx;
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SClearAllOwnBitRtl8195a(
+    IN  VOID    *Data
+)
+{
+    PHAL_I2S_INIT_DAT pHalI2SInitData = (PHAL_I2S_INIT_DAT)Data;
+    u8  I2SIdx;
+    u32 i;
+    
+    I2SIdx = pHalI2SInitData->I2SIdx;
+
+    for (i=0;i<4;i++) {
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_TX_PAGE0_OWN+(i<<2), 0);
+        HAL_I2S_WRITE32(I2SIdx, REG_I2S_RX_PAGE0_OWN+(i<<2), 0);
+    }
+
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+HalI2SDMACtrlRtl8195a(
+    IN  VOID    *Data
+)
+{
+
+    return _EXIT_SUCCESS;
+}
+
+

lib/fwlib/rtl8195a/src/rtl8195a_mii.c

@@ -0,0 +1,325 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "rtl8195a_mii.h"
+#include "hal_mii.h"
+
+
+
+VOID MiiIrqHandle (IN VOID *Data);
+
+VOID MiiIrqHandle (IN VOID *Data) {
+    u32 RegValue = HalMiiGmacGetInterruptStatusRtl8195a();
+#ifdef CONFIG_MII_VERIFY
+	extern volatile u8 isRxOK;
+	extern volatile u8 isTxOK;
+	extern volatile u8 RxIntCnt;
+	
+
+//	DBG_8195A("ISR = 0x%08X\n", RegValue);
+	if(RegValue & GMAC_ISR_ROK) {
+		HalMiiGmacClearInterruptStatusRtl8195a(0x00410001);
+		isRxOK = 1;
+		RxIntCnt++;
+	}
+
+	if(RegValue & GMAC_ISR_TOK_TI) {
+		HalMiiGmacClearInterruptStatusRtl8195a(0x00410040);
+		isTxOK = 1;
+    }
+#else
+
+#endif
+}
+
+
+VOID
+ConfigDebugPort_E4(u32 DebugSelect) {
+    u32 RegValue;
+
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_CCR);
+    RegValue |= DebugSelect << 2;
+    HAL_MII_WRITE32(REG_RTL_MII_CCR, RegValue);
+}
+
+
+/**
+ * MII Initialize.
+ *
+ * MII Initialize.
+ *
+ * Initialization Steps:
+ *   I. Rtl8195A Board Configurations:
+ *     1. MII Function Enable & AHB mux
+ *
+ * @return runtime status value.
+ */
+BOOL
+HalMiiGmacInitRtl8195a(
+        IN VOID *Data
+        )
+{
+	u32 RegValue;
+
+
+	/* 1. enable MII Pinmux & disable SDIO Host/Device mode Pinmux */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_HCI_PINMUX_CTRL);
+	RegValue |= BIT24;
+	RegValue &= ~(BIT0 | BIT1); // Important!
+	HAL_WRITE32(PERI_ON_BASE, REG_HCI_PINMUX_CTRL, RegValue);
+
+	/* 2. enable MII IP block (214, 12) */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_SOC_HCI_COM_FUNC_EN);
+	RegValue |= BIT12;
+	HAL_WRITE32(PERI_ON_BASE, REG_SOC_HCI_COM_FUNC_EN, RegValue);
+
+	/* 3. Lexra2AHB Function Enable (304, 11) */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_PESOC_SOC_CTRL);
+	RegValue |= BIT11;
+	HAL_WRITE32(PERI_ON_BASE, REG_PESOC_SOC_CTRL, RegValue);
+
+	/* 4. enable MII bus clock (240, 24|25) */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_PESOC_HCI_CLK_CTRL0);
+	RegValue |= (BIT24 | BIT25);
+	HAL_WRITE32(PERI_ON_BASE, REG_PESOC_HCI_CLK_CTRL0, RegValue);
+
+	/* 5. */
+	RegValue = HAL_READ32(SYSTEM_CTRL_BASE, 0x74) & 0xFFFFC7FF;
+	HAL_WRITE32(SYSTEM_CTRL_BASE, 0x74, (RegValue | 0x00003000));
+
+	/* 6. AHB mux: select MII (214, 13) */
+    	RegValue = HAL_READ32(PERI_ON_BASE, REG_SOC_HCI_COM_FUNC_EN);
+	RegValue |= BIT13;
+	HAL_WRITE32(PERI_ON_BASE, REG_SOC_HCI_COM_FUNC_EN, RegValue);
+
+	/* 7. Vendor Register Clock Enable (230, 6|7) */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_PESOC_CLK_CTRL);
+	RegValue |= (BIT6 | BIT7);
+	HAL_WRITE32(PERI_ON_BASE, REG_PESOC_CLK_CTRL, RegValue);
+
+	/* 8. Enable GMAC Lexra Timeout (090, 16|17|18) */
+	RegValue = HAL_READ32(VENDOR_REG_BASE, 0x0090);
+	RegValue |= (BIT16 | BIT17 | BIT18);
+	HAL_WRITE32(VENDOR_REG_BASE, 0x0090, RegValue);
+
+	/* 9. Endian Swap Control (304, 12|13) */
+	RegValue = HAL_READ32(PERI_ON_BASE, REG_PESOC_SOC_CTRL);
+	RegValue |= (BIT12 | BIT13);
+	HAL_WRITE32(PERI_ON_BASE, REG_PESOC_SOC_CTRL, RegValue);
+
+	return _TRUE;
+}
+
+
+BOOL
+HalMiiInitRtl8195a(
+        IN VOID *Data
+        )
+{
+    return _TRUE;
+}
+
+
+BOOL
+HalMiiGmacResetRtl8195a(
+        IN VOID *Data
+        )
+{
+	HAL_MII_WRITE32(REG_RTL_MII_CR, (HAL_MII_READ32(REG_RTL_MII_CR) | BIT0));
+
+    return _TRUE;
+}
+
+
+BOOL
+HalMiiGmacEnablePhyModeRtl8195a(
+        IN VOID *Data
+        )
+{
+    return _TRUE;
+}
+
+
+u32
+HalMiiGmacXmitRtl8195a(
+        IN VOID *Data
+        )
+{
+    return 0;
+}
+
+
+VOID
+HalMiiGmacCleanTxRingRtl8195a(
+        IN VOID *Data
+        )
+{
+}
+
+
+VOID
+HalMiiGmacFillTxInfoRtl8195a(
+        IN VOID *Data
+        )
+{
+    PMII_ADAPTER pMiiAdapter = (PMII_ADAPTER) Data;
+    PTX_INFO pTx_Info = pMiiAdapter->pTx_Info;
+    VOID* TxBuffer  = pMiiAdapter->TxBuffer;
+
+
+    pTx_Info->opts1.dw = 0xBC8001FE;
+    /* pTx_Info->opts1.dw = 0xBC800080; // size: 128 */
+
+    pTx_Info->addr     = (u32)TxBuffer;
+    pTx_Info->opts2.dw = 0x0400279F;
+    pTx_Info->opts3.dw = 0x00000000;
+    /* pTx_Info->opts4.dw = 0x57800000; */
+    pTx_Info->opts4.dw = 0x1FE00000;
+
+    HAL_MII_WRITE32(REG_RTL_MII_TXFDP1, pTx_Info);
+}
+
+
+VOID
+HalMiiGmacFillRxInfoRtl8195a(
+        IN VOID *Data
+        )
+{
+    PMII_ADAPTER pMiiAdapter = (PMII_ADAPTER) Data;
+    PRX_INFO pRx_Info = pMiiAdapter->pRx_Info;
+    VOID* RxBuffer    = pMiiAdapter->RxBuffer;
+
+
+    /* pRx_Info->opts1.dw = 0x80000200; //Data Length: 4095(FFF), 512(200) */
+    pRx_Info->opts1.dw = 0x800001FC; //Data Length: 4095(FFF), 512(200)
+    /* pRx_Info->opts1.dw = 0x8000007F; */
+
+    pRx_Info->addr     = (u32)RxBuffer;
+    pRx_Info->opts2.dw = 0x00000000;
+    pRx_Info->opts3.dw = 0x00000000;
+
+    HAL_MII_WRITE32(REG_RTL_MII_RXFDP1, pRx_Info);
+}
+
+
+VOID
+HalMiiGmacTxRtl8195a(
+        IN VOID *Data
+        )
+{
+    u32 RegValue;
+
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD);
+    RegValue |= BIT_IOCMD_TXENABLE(1);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD, RegValue);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD);
+    RegValue |= BIT_IOCMD_FIRST_DMATX_ENABLE(1);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD, RegValue);
+}
+
+
+VOID
+HalMiiGmacRxRtl8195a(
+        IN VOID *Data
+        )
+{
+    u32 RegValue;
+
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_TCR);
+
+    HAL_MII_WRITE32(REG_RTL_MII_TCR, 0x00000D00);  // loopback R2T mode
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_RCR);
+    HAL_MII_WRITE32(REG_RTL_MII_RCR, 0x0000007F);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_ETNRXCPU1);
+    HAL_MII_WRITE32(REG_RTL_MII_ETNRXCPU1, 0x1F0A0F00);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_RX_PSE1);
+    HAL_MII_WRITE32(REG_RTL_MII_RX_PSE1, 0x00000022);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD1);
+    RegValue |= BIT_IOCMD1_FIRST_DMARX_ENABLE(1);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD1, RegValue);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD);
+    RegValue |= BIT_IOCMD_RXENABLE(1);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD, RegValue);
+}
+
+
+VOID
+HalMiiGmacSetDefaultEthIoCmdRtl8195a(
+        IN VOID *Data
+        )
+{
+    u32 RegValue;
+
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD, CMD_CONFIG);
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD1);
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD1, CMD1_CONFIG);
+
+    //2014-04-29 yclin (disable 0x40051438[27] r_en_precise_dma) {
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IOCMD1);
+    RegValue = RegValue & 0xF7FFFFFF;
+    HAL_MII_WRITE32(REG_RTL_MII_IOCMD1, RegValue);
+    // }
+}
+
+
+VOID
+HalMiiGmacInitIrqRtl8195a(
+		IN VOID *Data
+		)
+{
+	IRQ_HANDLE	MiiIrqHandle_Master;
+	PMII_ADAPTER pMiiAdapter = (PMII_ADAPTER) Data;
+
+
+	MiiIrqHandle_Master.Data	 = (u32) (pMiiAdapter);
+	MiiIrqHandle_Master.IrqNum	 = GMAC_IRQ;
+	MiiIrqHandle_Master.IrqFun	 = (IRQ_FUN) MiiIrqHandle;
+	MiiIrqHandle_Master.Priority = 0;
+	InterruptRegister(&MiiIrqHandle_Master);
+	InterruptEn(&MiiIrqHandle_Master);
+}
+
+
+u32
+HalMiiGmacGetInterruptStatusRtl8195a(
+        VOID
+        )
+{
+    u32 RegValue;
+
+
+    RegValue = HAL_MII_READ32(REG_RTL_MII_IMRISR);
+
+    return RegValue;
+}
+
+
+VOID
+HalMiiGmacClearInterruptStatusRtl8195a(
+        u32 IsrStatus
+        )
+{
+    HAL_MII_WRITE32(REG_RTL_MII_IMRISR, IsrStatus);
+}
+
+

lib/fwlib/rtl8195a/src/rtl8195a_pcm.c

@@ -0,0 +1,360 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "platform_autoconf.h" 
+#include "diag.h"
+#include "rtl8195a_pcm.h"
+#include "hal_pcm.h"
+
+extern void *
+_memset( void *s, int c, SIZE_T n );
+
+VOID
+HalPcmOnOffRtl8195a (
+    IN  VOID              *Data
+)
+{
+    PHAL_PCM_ADAPTER pHalPcmAdapter = (PHAL_PCM_ADAPTER) Data;
+    //todo on off pcm
+
+}
+
+//default sampling rate 8khz, linear,  10ms frame size, time slot 0 , tx+rx
+//          master mode, enable endian swap
+// Question: need local tx/rx page?
+BOOL
+HalPcmInitRtl8195a(
+    IN  VOID     *Data
+)
+{
+
+    PHAL_PCM_ADAPTER pHalPcmAdapter = (PHAL_PCM_ADAPTER) Data;
+    _memset((void *)pHalPcmAdapter, 0, sizeof(HAL_PCM_ADAPTER));
+
+    //4 1) Initial PcmChCNR03 Register
+    pHalPcmAdapter->PcmChCNR03.CH0MuA      = 0;
+    pHalPcmAdapter->PcmChCNR03.CH0Band     = 0;
+
+
+    //4 1) Initial PcmTSR03 Register
+    pHalPcmAdapter->PcmTSR03.CH0TSA      = 0; 
+
+    //4 1) Initial PcmBSize03 Register
+    pHalPcmAdapter->PcmBSize03.CH0BSize    = 39; // 40word= 8khz*0.01s*1ch*2byte/4byte
+
+
+    //4 2) Initial Ctl Register
+
+    pHalPcmAdapter->PcmCtl.Pcm_En      = 1;
+    pHalPcmAdapter->PcmCtl.SlaveMode   = 0;
+    pHalPcmAdapter->PcmCtl.FsInv       = 0;
+    pHalPcmAdapter->PcmCtl.LinearMode  = 0;
+    pHalPcmAdapter->PcmCtl.LoopBack    = 0;
+    pHalPcmAdapter->PcmCtl.EndianSwap  = 1;
+
+    return _TRUE;        
+}
+
+
+BOOL
+HalPcmSettingRtl8195a(
+    IN  VOID     *Data
+)
+{
+
+    PHAL_PCM_ADAPTER pHalPcmAdapter = (PHAL_PCM_ADAPTER) Data;
+    u8  PcmIndex = pHalPcmAdapter->PcmIndex;
+    u8  PcmCh = pHalPcmAdapter->PcmCh;
+    u32 RegCtl, RegChCNR03, RegTSR03, RegBSize03;
+    u32 Isr03;
+    
+    PcmCh=0;
+    //4 1) Check Pcm index is avaliable
+    if (HAL_PCMX_READ32(PcmIndex, REG_PCM_CHCNR03) & (BIT24|BIT25)) {
+        //4 Pcm index is running, stop first
+        DBG_8195A_DMA("Error, PCM %d ch%d is running; stop first!\n", PcmIndex, PcmCh);
+
+        return _FALSE;
+    }
+
+    //4 2) Check if there are the pending isr
+
+
+        Isr03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_ISR03);
+	Isr03 &= 0xff000000;
+            //4 Clear Pending Isr
+        HAL_PCMX_WRITE32(PcmIndex, REG_PCM_ISR03, Isr03);
+        //} 
+
+
+    //4 3) Process RegCtl 
+    RegCtl = HAL_PCMX_READ32(PcmIndex, REG_PCM_CTL);
+
+        //4 Clear Ctl register bits
+    RegCtl &= ( BIT_INV_CTLX_SLAVE_SEL &
+                BIT_INV_CTLX_FSINV &
+                BIT_INV_CTLX_PCM_EN &
+                BIT_INV_CTLX_LINEARMODE &
+                BIT_INV_CTLX_LOOP_BACK &
+                BIT_INV_CTLX_ENDIAN_SWAP);
+
+    RegCtl =  BIT_CTLX_SLAVE_SEL(pHalPcmAdapter->PcmCtl.SlaveMode) |
+              BIT_CTLX_FSINV(pHalPcmAdapter->PcmCtl.FsInv) |
+              BIT_CTLX_PCM_EN(pHalPcmAdapter->PcmCtl.Pcm_En) |
+              BIT_CTLX_LINEARMODE(pHalPcmAdapter->PcmCtl.LinearMode) |
+              BIT_CTLX_LOOP_BACK(pHalPcmAdapter->PcmCtl.LoopBack) |
+              BIT_CTLX_ENDIAN_SWAP(pHalPcmAdapter->PcmCtl.EndianSwap) |
+              RegCtl; 
+
+    HAL_PCMX_WRITE32(PcmIndex, REG_PCM_CTL, RegCtl);
+        //4 4) Program ChCNR03 Register
+        
+        RegChCNR03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_CHCNR03);
+
+        RegChCNR03 &= (BIT_INV_CHCNR03_CH0RE &
+                    BIT_INV_CHCNR03_CH0TE &
+                    BIT_INV_CHCNR03_CH0MUA &
+                    BIT_INV_CHCNR03_CH0BAND);
+
+        RegChCNR03 = BIT_CHCNR03_CH0RE(pHalPcmAdapter->PcmChCNR03.CH0RE) |
+                     BIT_CHCNR03_CH0TE(pHalPcmAdapter->PcmChCNR03.CH0TE) |
+                     BIT_CHCNR03_CH0MUA(pHalPcmAdapter->PcmChCNR03.CH0MuA) |
+                     BIT_CHCNR03_CH0BAND(pHalPcmAdapter->PcmChCNR03.CH0Band) |
+                     RegChCNR03;
+        
+        DBG_8195A_DMA("RegChCNR03 data:0x%x\n", RegChCNR03);
+
+        HAL_PCMX_WRITE32(PcmIndex, REG_PCM_CHCNR03, RegChCNR03);
+        // time slot
+        RegTSR03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_TSR03);
+
+        RegTSR03 &= (BIT_INV_TSR03_CH0TSA);
+        RegTSR03 = BIT_TSR03_CH0TSA(pHalPcmAdapter->PcmTSR03.CH0TSA) |
+                     RegTSR03;
+        
+        DBG_8195A_DMA("RegTSR03 data:0x%x\n", RegTSR03);
+
+        HAL_PCMX_WRITE32(PcmIndex, REG_PCM_TSR03, RegTSR03);
+
+        // buffer size
+        RegBSize03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_BSIZE03);
+
+        RegBSize03 &= (BIT_INV_BSIZE03_CH0BSIZE);
+        RegBSize03 = BIT_BSIZE03_CH0BSIZE(pHalPcmAdapter->PcmBSize03.CH0BSize) |
+                     RegBSize03;
+        
+        DBG_8195A_DMA("RegBSize03 data:0x%x\n", RegBSize03);
+
+        HAL_PCMX_WRITE32(PcmIndex, REG_PCM_BSIZE03, RegBSize03);
+
+
+
+
+    return _TRUE;
+}
+
+BOOL
+HalPcmEnRtl8195a(
+    IN  VOID     *Data
+)
+{
+
+    PHAL_PCM_ADAPTER pHalPcmAdapter = (PHAL_PCM_ADAPTER) Data;
+    u8  PcmIndex = pHalPcmAdapter->PcmIndex;
+    u8  PcmCh = pHalPcmAdapter->PcmCh;
+    u32 RegChCNR03;
+
+    PcmCh=0;
+    pHalPcmAdapter->Enable = 1;
+
+
+    //4 1) Check Pcm index is avaliable
+    RegChCNR03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_CHCNR03);
+    if (RegChCNR03 & (BIT24|BIT25)) {
+        //4 Pcm index is running, stop first
+        DBG_8195A_DMA("Error, PCM %d ch%d is running; stop first!\n", PcmIndex, PcmCh);
+
+        return _FALSE;
+    }
+
+    HAL_PCMX_WRITE32(PcmIndex, REG_PCM_CHCNR03, RegChCNR03|BIT24|BIT25);
+    pHalPcmAdapter->PcmChCNR03.CH0RE = 1;
+    pHalPcmAdapter->PcmChCNR03.CH0TE = 1;
+
+    return _TRUE;
+}
+
+BOOL
+HalPcmDisRtl8195a(
+    IN  VOID     *Data
+)
+{
+
+    PHAL_PCM_ADAPTER pHalPcmAdapter = (PHAL_PCM_ADAPTER) Data;
+    u8  PcmIndex = pHalPcmAdapter->PcmIndex;
+    u8  PcmCh = pHalPcmAdapter->PcmCh;
+    u32 RegChCNR03;
+
+    PcmCh=0;
+    pHalPcmAdapter->Enable = 0;
+
+
+    RegChCNR03 = HAL_PCMX_READ32(PcmIndex, REG_PCM_CHCNR03);
+
+    HAL_PCMX_WRITE32(PcmIndex, REG_PCM_CHCNR03, RegChCNR03&(~(BIT24|BIT25)));
+    pHalPcmAdapter->PcmChCNR03.CH0RE = 0;
+    pHalPcmAdapter->PcmChCNR03.CH0TE = 0;
+
+    return _TRUE;
+}
+
+
+
+BOOL
+HalPcmIsrEnAndDisRtl8195a (
+    IN  VOID              *Data
+)
+{
+/*
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    u32 IsrMask, Addr, IsrCtrl;
+    u8  IsrTypeIndex = 0;
+
+    for (IsrTypeIndex=0; IsrTypeIndex<5; IsrTypeIndex++) {
+        
+        if (BIT_(IsrTypeIndex) & pHalGdmaAdapter->GdmaIsrType) {
+            Addr =  (REG_GDMA_MASK_INT_BASE + IsrTypeIndex*8);
+
+            IsrMask = HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, Addr);
+
+            IsrCtrl = ((pHalGdmaAdapter->IsrCtrl)?(pHalGdmaAdapter->ChEn | IsrMask):
+                                                 ((~pHalGdmaAdapter->ChEn) & IsrMask));
+
+            HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex,
+                              Addr, 
+                              IsrCtrl
+                              );
+                    
+        }   
+    }
+*/
+    return _TRUE;
+}
+
+
+
+BOOL
+HalPcmDumpRegRtl8195a (
+    IN  VOID              *Data
+)
+{
+/*    
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = Data;
+    HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex, 
+                      REG_GDMA_CH_EN, 
+                      (HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, REG_GDMA_CH_EN)| 
+                        (pHalGdmaAdapter->ChEn))
+                      );    
+*/
+    return _TRUE;    
+}
+
+BOOL
+HalPcmRtl8195a (
+    IN  VOID              *Data
+)
+{
+/*    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex, 
+                      REG_GDMA_CH_EN, 
+                      (HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, REG_GDMA_CH_EN)& 
+                        ~(pHalGdmaAdapter->ChEn))
+                      );    
+*/		      
+    return _TRUE;		      
+}
+/*
+u8
+HalGdmaChIsrCleanRtl8195a (
+    IN  VOID              *Data
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    u32 IsrStatus;
+    u8  IsrTypeIndex = 0, IsrActBitMap = 0;
+
+    for (IsrTypeIndex=0; IsrTypeIndex<5; IsrTypeIndex++) {
+
+        IsrStatus = HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, 
+                                    (REG_GDMA_RAW_INT_BASE + IsrTypeIndex*8));
+
+//        DBG_8195A_DMA("Isr Type %d: Isr Status 0x%x\n", IsrTypeIndex, IsrStatus);
+
+        IsrStatus = (IsrStatus & (pHalGdmaAdapter->ChEn & 0xFF));
+        
+        if (BIT_(IsrTypeIndex) & pHalGdmaAdapter->GdmaIsrType) {
+            HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex,
+                              (REG_GDMA_CLEAR_INT_BASE+ (IsrTypeIndex*8)), 
+                              (IsrStatus)// & (pHalGdmaAdapter->ChEn & 0xFF))
+                              );
+            IsrActBitMap |= BIT_(IsrTypeIndex);
+            
+        }
+        
+    }
+    return IsrActBitMap;
+     
+}
+
+
+VOID
+HalGdmaChCleanAutoSrcRtl8195a (
+    IN  VOID              *Data
+) 
+{
+    u32 CfgxLow;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    CfgxLow = HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex,
+                              (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF));
+
+    CfgxLow &= BIT_INVC_CFGX_LO_RELOAD_SRC;
+
+    HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex,
+                  (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF), 
+                  CfgxLow
+                  );
+    
+    DBG_8195A_DMA("CFG Low data:0x%x\n",
+    HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF)));
+}
+
+VOID
+HalGdmaChCleanAutoDstRtl8195a (
+    IN  VOID              *Data
+) 
+{
+    u32 CfgxLow;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter = (PHAL_GDMA_ADAPTER) Data;
+    CfgxLow = HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex,
+                              (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF));
+
+    CfgxLow &= BIT_INVC_CFGX_LO_RELOAD_DST;
+
+    HAL_GDMAX_WRITE32(pHalGdmaAdapter->GdmaIndex,
+                  (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF), 
+                  CfgxLow
+                  );
+    DBG_8195A_DMA("CFG Low data:0x%x\n",
+    HAL_GDMAX_READ32(pHalGdmaAdapter->GdmaIndex, (REG_GDMA_CH_CFG + pHalGdmaAdapter->ChNum*REG_GDMA_CH_OFF)));
+        
+}
+*/
+
+

lib/fwlib/rtl8195a/src/rtl8195a_pwm.c

@@ -0,0 +1,219 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "hal_peri_on.h"
+
+#ifdef CONFIG_PWM_EN
+#include "rtl8195a_pwm.h"
+#include "hal_pwm.h"
+
+extern HAL_PWM_ADAPTER PWMPin[];
+
+extern HAL_TIMER_OP HalTimerOp;
+
+/**
+  * @brief  Configure a G-Timer to generate a tick with certain time.
+  *
+  * @param  pwm_id: the PWM pin index
+  * @param  tick_time: the time (micro-second) of a tick
+  *
+  * @retval None
+  */
+void 
+Pwm_SetTimerTick_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt,
+    u32 tick_time
+)
+{
+    TIMER_ADAPTER TimerAdapter;
+
+
+    if (tick_time <= MIN_GTIMER_TIMEOUT) {
+        tick_time = MIN_GTIMER_TIMEOUT;
+    }
+    else {
+        tick_time = (((tick_time-1)/TIMER_TICK_US)+1) * TIMER_TICK_US;
+    }
+    
+    // Initial a G-Timer for the PWM pin
+    if (pPwmAdapt->tick_time != tick_time) {
+        TimerAdapter.IrqDis = 1;    // Disable Irq
+        TimerAdapter.IrqHandle.IrqFun = (IRQ_FUN) NULL;
+        TimerAdapter.IrqHandle.IrqNum = TIMER2_7_IRQ;
+        TimerAdapter.IrqHandle.Priority = 0;
+        TimerAdapter.IrqHandle.Data = (u32)NULL;
+        TimerAdapter.TimerId = pPwmAdapt->gtimer_id;
+        TimerAdapter.TimerIrqPriority = 0;
+        TimerAdapter.TimerLoadValueUs = tick_time-1;
+        TimerAdapter.TimerMode = 1; // auto-reload with user defined value
+
+        HalTimerOp.HalTimerInit((VOID*) &TimerAdapter);
+        pPwmAdapt->tick_time = tick_time;
+        DBG_PWM_INFO("%s: Timer_Id=%d Count=%d\n", __FUNCTION__, pPwmAdapt->gtimer_id, tick_time);
+     }
+
+}
+
+
+/**
+  * @brief  Set the duty ratio of the PWM pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  * @param  period: the period time, in micro-second.
+  * @param  pulse_width: the pulse width time, in micro-second.
+  *
+  * @retval None
+  */
+void
+HAL_Pwm_SetDuty_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt,
+    u32 period,
+    u32 pulse_width
+)
+{
+    u32 RegAddr;
+    u32 RegValue;
+    u32 period_tick;
+    u32 pulsewidth_tick;
+    u32 tick_time;
+    u8 timer_id;
+    u8 pwm_id;
+
+    pwm_id = pPwmAdapt->pwm_id;
+    // Adjust the tick time to a proper value
+    if (period < (MIN_GTIMER_TIMEOUT*2)) {
+        DBG_PWM_ERR ("HAL_Pwm_SetDuty_8195a: Invalid PWM period(%d), too short!!\n", period);
+        tick_time = MIN_GTIMER_TIMEOUT;
+        period = MIN_GTIMER_TIMEOUT*2;
+    }
+    else {
+        tick_time = period / 0x3fc;
+        if (tick_time < MIN_GTIMER_TIMEOUT) {
+            tick_time = MIN_GTIMER_TIMEOUT;
+        }
+    }
+
+    Pwm_SetTimerTick_8195a(pPwmAdapt, tick_time);
+    tick_time = pPwmAdapt->tick_time;
+#if 0    
+    // Check if current tick time needs adjustment
+    if ((pPwmAdapt->tick_time << 12) <= period) {
+        // need a longger tick time
+    }
+    else if ((pPwmAdapt->tick_time >> 2) >= period) {
+        // need a shorter tick time
+    }
+#endif
+    period_tick = period/tick_time;
+    if (period_tick == 0) {
+        period_tick = 1;
+    }
+
+    if (pulse_width >= period) {
+//        pulse_width = period-1;
+        pulse_width = period;
+    }
+    pulsewidth_tick = pulse_width/tick_time;
+    if (pulsewidth_tick == 0) {
+//        pulsewidth_tick = 1;
+    }
+    
+    timer_id = pPwmAdapt->gtimer_id;
+
+    pPwmAdapt->period = period_tick & 0x3ff;
+    pPwmAdapt->pulsewidth = pulsewidth_tick & 0x3ff;
+    
+    RegAddr = REG_PERI_PWM0_CTRL + (pwm_id*4);
+    RegValue = BIT31 | (timer_id<<24) | (pulsewidth_tick<<12) | period_tick;
+    
+    HAL_WRITE32(PERI_ON_BASE, RegAddr, RegValue);
+}
+
+/**
+  * @brief  Initializes and enable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  * @param  sel: pin mux selection
+  * @param  timer_id: the G-timer index assigned to this PWM
+  *
+  * @retval HAL_Status
+  */
+HAL_Status 
+HAL_Pwm_Init_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+)
+{
+    u32 pwm_id;
+    u32 pin_sel;
+
+    pwm_id = pPwmAdapt->pwm_id;
+    pin_sel =  pPwmAdapt->sel;
+    // Initial a G-Timer for the PWM pin
+    Pwm_SetTimerTick_8195a(pPwmAdapt, MIN_GTIMER_TIMEOUT);
+
+    // Set default duty ration
+    HAL_Pwm_SetDuty_8195a(pPwmAdapt, 20000, 10000);
+
+    // Configure the Pin Mux
+    PinCtrl((PWM0+pwm_id), pin_sel, 1);
+
+    return HAL_OK;
+}
+
+
+/**
+  * @brief  Enable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  *
+  * @retval None
+  */
+void 
+HAL_Pwm_Enable_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+)
+{
+    u32 pwm_id;
+    
+    pwm_id = pPwmAdapt->pwm_id;
+    // Configure the Pin Mux
+    if (!pPwmAdapt->enable) {
+        PinCtrl((PWM0+pwm_id), pPwmAdapt->sel, 1);
+        HalTimerOp.HalTimerEn(pPwmAdapt->gtimer_id);        
+        pPwmAdapt->enable = 1;
+    }
+}
+
+
+/**
+  * @brief  Disable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  *
+  * @retval None
+  */
+void 
+HAL_Pwm_Disable_8195a(
+    HAL_PWM_ADAPTER *pPwmAdapt
+)
+{
+    u32 pwm_id;
+    
+    pwm_id = pPwmAdapt->pwm_id;
+    // Configure the Pin Mux
+    if (pPwmAdapt->enable) {
+        PinCtrl((PWM0+pwm_id), pPwmAdapt->sel, 0);
+        HalTimerOp.HalTimerDis(pPwmAdapt->gtimer_id);        
+        pPwmAdapt->enable = 0;
+    }
+}
+
+#endif  //CONFIG_PWM_EN

lib/fwlib/rtl8195a/src/rtl8195a_timer.c

@@ -0,0 +1,323 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+#include "rtl8195a.h" 
+#include "rtl8195a_timer.h"
+
+extern u32 gTimerRecord;
+extern IRQ_FUN Timer2To7VectorTable[MAX_TIMER_VECTOR_TABLE_NUM];
+
+#ifdef CONFIG_CHIP_A_CUT
+HAL_RAM_BSS_SECTION u32 gTimerRecord;
+#endif
+
+#ifdef CONFIG_CHIP_C_CUT
+extern u32 Timer2To7HandlerData[MAX_TIMER_VECTOR_TABLE_NUM];
+#else
+u32 Timer2To7HandlerData[MAX_TIMER_VECTOR_TABLE_NUM];
+#endif
+
+VOID
+HalTimerIrq2To7Handle_Patch(
+    IN  VOID    *Data
+)
+{
+    u32 TimerIrqStatus = 0, CheckIndex;
+    IRQ_FUN pHandler;
+
+    TimerIrqStatus = HAL_TIMER_READ32(TIMERS_INT_STATUS_OFF);
+
+    DBG_TIMER_INFO("%s:TimerIrqStatus: 0x%x\n",__FUNCTION__, TimerIrqStatus);
+    
+    for (CheckIndex = 2; CheckIndex<8; CheckIndex++) {
+
+        //3 Check IRQ status bit and Timer X IRQ enable bit
+        if ((TimerIrqStatus & BIT_(CheckIndex)) && 
+            (HAL_TIMER_READ32(TIMER_INTERVAL*CheckIndex + TIMER_CTL_REG_OFF) & BIT0)) {
+            //3 Execute Timer callback function
+            pHandler = Timer2To7VectorTable[CheckIndex-2];
+            if (pHandler != NULL) {
+                pHandler((void*)Timer2To7HandlerData[CheckIndex-2]);
+            }
+            //3 Clear Timer ISR
+            HAL_TIMER_READ32(TIMER_INTERVAL*CheckIndex + TIMER_EOI_OFF);
+        }
+    }
+}
+
+HAL_Status
+HalTimerIrqRegisterRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PTIMER_ADAPTER      pHalTimerAdap = (PTIMER_ADAPTER) Data;
+    IRQ_HANDLE          TimerIrqHandle;
+    //IRQ_FUN             BackUpIrqFun = NULL;
+    
+    if (pHalTimerAdap->TimerId > 7) {
+        DBG_TIMER_ERR("%s: No Support Timer ID %d!\r\n", __FUNCTION__, pHalTimerAdap->TimerId);
+        return HAL_ERR_PARA;
+    }
+    else {
+        if (pHalTimerAdap->TimerId > 1) {
+
+            TimerIrqHandle.IrqNum = TIMER2_7_IRQ;
+            TimerIrqHandle.IrqFun = (IRQ_FUN) HalTimerIrq2To7Handle_Patch;
+
+            Timer2To7VectorTable[pHalTimerAdap->TimerId-2] = 
+                (IRQ_FUN) pHalTimerAdap->IrqHandle.IrqFun;
+            Timer2To7HandlerData[pHalTimerAdap->TimerId-2] = 
+                (uint32_t) pHalTimerAdap->IrqHandle.Data;
+        }
+        else {
+            TimerIrqHandle.IrqNum = (pHalTimerAdap->TimerId ? TIMER1_IRQ : TIMER0_IRQ);
+            TimerIrqHandle.IrqFun = (IRQ_FUN) pHalTimerAdap->IrqHandle.IrqFun;
+        }
+        TimerIrqHandle.Data = (u32)pHalTimerAdap;
+        InterruptRegister(&TimerIrqHandle);
+    }
+    
+    return HAL_OK;
+}
+
+#ifndef CONFIG_CHIP_C_CUT
+// Patch for A/B Cut
+HAL_Status
+HalTimerInitRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PTIMER_ADAPTER pHalTimerAdap = (PTIMER_ADAPTER) Data;
+    HAL_Status ret=HAL_OK;
+    u32 ControlReg;
+
+    if ((gTimerRecord & (1<<pHalTimerAdap->TimerId)) != 0) {
+        DBG_TIMER_ERR ("%s:Error! Timer %d is occupied!\r\n", __FUNCTION__, pHalTimerAdap->TimerId);
+        return HAL_BUSY;
+    }
+
+    //4 1) Config Timer Setting
+    ControlReg = ((u32)pHalTimerAdap->TimerMode<<1)|((u32)pHalTimerAdap->IrqDis<<2);
+    /*
+        set TimerControlReg
+        0: Timer enable (0,disable; 1,enable)
+        1: Timer Mode (0, free-running mode; 1, user-defined count mode)
+        2: Timer Interrupt Mask (0, not masked; 1,masked)
+        */
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*pHalTimerAdap->TimerId + TIMER_CTL_REG_OFF), 
+                        ControlReg);
+
+    if (pHalTimerAdap->TimerMode) {
+        //User-defined Mode
+        HalTimerReLoadRtl8195a_Patch(pHalTimerAdap->TimerId ,pHalTimerAdap->TimerLoadValueUs);
+    } 
+    else {
+        // set TimerLoadCount Register
+        HAL_TIMER_WRITE32((TIMER_INTERVAL*pHalTimerAdap->TimerId + TIMER_LOAD_COUNT_OFF),
+                            0xFFFFFFFF);
+    }
+
+    //4  2) Setting Timer IRQ
+    if (!pHalTimerAdap->IrqDis) {
+        if (pHalTimerAdap->IrqHandle.IrqFun != NULL) {
+            //4 2.1) Initial TimerIRQHandle
+            ret = HalTimerIrqRegisterRtl8195a_Patch(pHalTimerAdap);
+            if (HAL_OK != ret) {
+                DBG_TIMER_ERR ("%s: Timer %d Register IRQ Err!\r\n", __FUNCTION__, pHalTimerAdap->TimerId);
+                return ret;
+            }
+            //4 2.2) Enable TimerIRQ for Platform
+            InterruptEn((PIRQ_HANDLE)&pHalTimerAdap->IrqHandle);
+        }
+        else {
+            DBG_TIMER_ERR ("%s: Timer %d ISR Handler is NULL!\r\n", __FUNCTION__, pHalTimerAdap->TimerId);
+            return HAL_ERR_PARA;
+        }
+    }
+    
+    //4 4) Enable Timer
+//    HAL_TIMER_WRITE32((TIMER_INTERVAL*pHalTimerAdap->TimerId + TIMER_CTL_REG_OFF), 
+//                        (ControlReg|0x1));
+
+    gTimerRecord |= (1<<pHalTimerAdap->TimerId);
+
+    return ret;
+}
+
+#else
+// Patch for C Cut
+HAL_Status
+HalTimerInitRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PTIMER_ADAPTER pHalTimerAdap = (PTIMER_ADAPTER) Data;
+    HAL_Status ret=HAL_OK;
+
+    ret = HalTimerInitRtl8195aV02(Data);
+
+    // Patch the Rom code to load the correct count value
+    if (pHalTimerAdap->TimerMode) {
+        //User-defined Mode
+        HalTimerReLoadRtl8195a_Patch(pHalTimerAdap->TimerId ,pHalTimerAdap->TimerLoadValueUs);
+    } 
+
+    return ret;
+}
+#endif
+
+HAL_Status
+HalTimerIrqUnRegisterRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PTIMER_ADAPTER      pHalTimerAdap = (PTIMER_ADAPTER) Data;
+    PIRQ_HANDLE         pTimerIrqHandle;
+    u32 i;
+    
+    pTimerIrqHandle = &pHalTimerAdap->IrqHandle;
+
+    if (pHalTimerAdap->TimerId > 7) {
+        DBG_TIMER_ERR("%s:Error: No Support Timer ID!\n", __FUNCTION__);
+        return HAL_ERR_PARA;
+    }
+    else {
+        if (pHalTimerAdap->TimerId > 1) {
+            pTimerIrqHandle->IrqNum = TIMER2_7_IRQ;
+            Timer2To7VectorTable[pHalTimerAdap->TimerId-2] = NULL;
+            for (i=0;i<MAX_TIMER_VECTOR_TABLE_NUM;i++) {
+                if (Timer2To7VectorTable[i] != NULL) {
+                    break;
+                }
+            }
+            
+            if (i == MAX_TIMER_VECTOR_TABLE_NUM) {
+                // All timer UnRegister Interrupt
+                InterruptDis((PIRQ_HANDLE)&pHalTimerAdap->IrqHandle);
+                InterruptUnRegister(pTimerIrqHandle);
+            }
+        }
+        else {
+            pTimerIrqHandle->IrqNum = (pHalTimerAdap->TimerId ? TIMER1_IRQ : TIMER0_IRQ);
+            InterruptUnRegister(pTimerIrqHandle);
+        }
+
+    }
+    
+    return HAL_OK;
+}
+
+
+VOID
+HalTimerDeInitRtl8195a_Patch(
+    IN  VOID    *Data
+)
+{
+    PTIMER_ADAPTER pHalTimerAdap = (PTIMER_ADAPTER) Data;
+    u32 timer_id;
+
+    timer_id = pHalTimerAdap->TimerId;
+    HalTimerDisRtl8195a (timer_id);
+    if (!pHalTimerAdap->IrqDis) {
+        if (pHalTimerAdap->IrqHandle.IrqFun != NULL) {
+            HalTimerIrqUnRegisterRtl8195a_Patch(pHalTimerAdap);
+        }
+    }
+
+    gTimerRecord &= ~(1<<pHalTimerAdap->TimerId);
+}
+
+VOID
+HalTimerReLoadRtl8195a_Patch(
+    IN  u32 TimerId,
+    IN  u32 LoadUs
+)
+{
+    u32 LoadCount = 0;
+    u32 ms125;  // how many 125ms
+    u32 remain_us;
+
+    ms125 = LoadUs/125000;
+    remain_us = LoadUs - (ms125*125000);
+    LoadCount = ms125 * (GTIMER_CLK_HZ/8);
+    LoadCount += (remain_us*GTIMER_CLK_HZ)/1000000;
+    if (LoadCount == 0) {
+        LoadCount = 1;
+    }
+    
+//    DBG_TIMER_INFO("%s: Load Count=0x%x\r\n", __FUNCTION__, LoadCount);
+    // set TimerLoadCount Register
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*TimerId + TIMER_LOAD_COUNT_OFF),
+                        LoadCount);
+}
+
+u32
+HalTimerReadCountRtl8195a_Patch(
+    IN  u32 TimerId
+)
+{
+    u32 TimerCountOld;
+    u32 TimerCountNew;
+    u32 TimerRDCnt;
+    
+    TimerRDCnt = 0;
+    TimerCountOld = HAL_TIMER_READ32(TimerId*TIMER_INTERVAL + TIMER_CURRENT_VAL_OFF);
+    while(1) {        
+        TimerCountNew = HAL_TIMER_READ32(TimerId*TIMER_INTERVAL + TIMER_CURRENT_VAL_OFF);
+
+        if (TimerCountOld == TimerCountNew) {
+            return (u32)TimerCountOld;
+        }
+        else {
+            TimerRDCnt++;
+            TimerCountOld = TimerCountNew;
+
+            if (TimerRDCnt >= 2){
+                return (u32)TimerCountOld;
+            }
+        }
+    }    
+}
+
+VOID
+HalTimerIrqEnRtl8195a(
+    IN  u32 TimerId
+)
+{
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*TimerId + TIMER_CTL_REG_OFF), 
+                        HAL_TIMER_READ32(TIMER_INTERVAL*TimerId  + TIMER_CTL_REG_OFF) & (~(BIT2)));
+}
+
+VOID
+HalTimerIrqDisRtl8195a(
+    IN  u32 TimerId
+)
+{
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*TimerId + TIMER_CTL_REG_OFF), 
+                        HAL_TIMER_READ32(TIMER_INTERVAL*TimerId  + TIMER_CTL_REG_OFF) | (BIT2));
+}
+
+VOID
+HalTimerEnRtl8195a_Patch(
+    IN  u32 TimerId
+)
+{
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*TimerId + TIMER_CTL_REG_OFF), 
+                        HAL_TIMER_READ32(TIMER_INTERVAL*TimerId  + TIMER_CTL_REG_OFF) | (BIT0));
+}
+
+VOID
+HalTimerDisRtl8195a_Patch(
+    IN  u32 TimerId
+)
+{
+    // Disable Timer will alos disable the IRQ, so need to re-enable the IRQ when re-enable the timer
+    HAL_TIMER_WRITE32((TIMER_INTERVAL*TimerId + TIMER_CTL_REG_OFF), 
+                        HAL_TIMER_READ32(TIMER_INTERVAL*TimerId  + TIMER_CTL_REG_OFF) & (~BIT0));    
+}
+

lib/fwlib/rtl8195a_usb.h

@@ -0,0 +1,111 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#ifndef _RTL8195A_USB_H_
+#define _RTL8195A_USB_H_
+
+
+// common command for USB
+#define USB_CMD_TX_ETH         0x83    // request to TX a 802.3 packet
+#define USB_CMD_TX_WLN         0x81    // request to TX a 802.11 packet
+#define USB_CMD_H2C            0x11    // H2C(host to device) command packet
+#define USB_CMD_MEMRD          0x51    // request to read a block of memory data
+#define USB_CMD_MEMWR          0x53    // request to write a block of memory
+#define USB_CMD_MEMST          0x55    // request to set a block of memory with a value
+#define USB_CMD_STARTUP        0x61    // request to jump to the start up function
+
+#define USB_CMD_RX_ETH         0x82    // indicate a RX 802.3 packet
+#define USB_CMD_RX_WLN         0x80    // indicate a RX 802.11 packet
+#define USB_CMD_C2H            0x10    // C2H(device to host) command packet
+#define USB_CMD_MEMRD_RSP      0x50    // response to memory block read command
+#define USB_CMD_MEMWR_RSP      0x52    // response to memory write command
+#define USB_CMD_MEMST_RSP      0x54    // response to memory set command
+#define USB_CMD_STARTED        0x60    // indicate the program has jumped to the given function
+
+
+// TODO: This data structer just for test, we should modify it for the normal driver
+typedef struct _USB_TX_DESC{
+	// u4Byte 0
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	txpktsize:16;       // bit[15:0]
+	u32	offset:8;    		// bit[23:16], store the sizeof(SDIO_TX_DESC)
+	u32	bus_agg_num:8;		// bit[31:24], the bus aggregation number
+#else
+    u32 bus_agg_num:8;      // bit[31:24], the bus aggregation number
+    u32 offset:8;           // bit[23:16], store the sizeof(SDIO_TX_DESC)
+    u32 txpktsize:16;       // bit[15:0]
+#endif
+
+	// u4Byte 1
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+    u32 type:8;             // bit[7:0], the packet type
+    u32 rsvd0:24;
+#else
+    u32 rsvd0:24;
+    u32 type:8;             // bit[7:0], the packet type
+#endif
+
+	// u4Byte 2
+	u32	rsvd1;
+	
+	// u4Byte 3
+	u32	rsvd2;
+	
+	// u4Byte 4
+	u32	rsvd3;
+
+	// u4Byte 5
+	u32	rsvd4;
+} USB_TX_DESC, *PUSB_TX_DESC;
+
+#define SIZE_USB_TX_DESC	sizeof(USB_TX_DESC)
+
+// TODO: This data structer just for test, we should modify it for the normal driver
+typedef struct _USB_RX_DESC{
+	// u4Byte 0
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	pkt_len:16;     // bit[15:0], the packet size
+	u32	offset:8;    	// bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc
+	u32	rsvd0:6;        // bit[29:24]
+	u32	icv:1;          // bit[30], ICV error
+	u32	crc:1;          // bit[31], CRC error
+#else
+	u32	crc:1;          // bit[31], CRC error
+	u32	icv:1;          // bit[30], ICV error
+	u32	rsvd0:6;        // bit[29:24]
+	u32	offset:8;    	// bit[23:16], the offset from the packet start to the buf start, also means the size of RX Desc
+	u32	pkt_len:16;     // bit[15:0], the packet size
+#endif
+
+	// u4Byte 1
+#if (SYSTEM_ENDIAN==PLATFORM_LITTLE_ENDIAN)
+	u32	type:8;         // bit[7:0], the type of this packet
+	u32	rsvd1:24;       // bit[31:8]
+#else
+    u32 rsvd1:24;       // bit[31:8]
+    u32 type:8;         // bit[7:0], the type of this packet
+#endif
+
+	// u4Byte 2
+	u32	rsvd2;
+	
+	// u4Byte 3
+	u32	rsvd3;
+	
+	// u4Byte 4
+	u32	rsvd4;
+
+	// u4Byte 5
+	u32	rsvd5;
+} USB_RX_DESC, *PUSB_RX_DESC;
+
+#define SIZE_USB_RX_DESC	sizeof(USB_RX_DESC)
+
+#endif	// #ifndef _RTL8195A_USB_H_
+

lib/fwlib/src/hal_32k.c

@@ -0,0 +1,293 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_TIMER_MODULE
+
+VOID
+En32KCalibration(
+    VOID
+)
+{
+    u32 Rtemp;
+    u32 Ttemp = 0;
+
+    //DiagPrintf("32K clock source calibration\n");
+
+    //set parameter
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+    //offset 1 = 0x1500
+    Rtemp = 0x811500;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    //offset 2 = 0x01c0
+    Rtemp = 0x8201c0;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+        HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+    
+    //offset 4 = 0x0100
+    Rtemp = 0x840100;
+        HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    //offset 0 = 0xf980
+    Rtemp = 0x80f980;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    while(1) {
+        //Polling LOCK
+        Rtemp = 0x110000;
+        HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+        //DiagPrintf("Polling lock\n");
+        HalDelayUs(40);
+
+        Rtemp = HAL_READ32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL1);
+        if ((Rtemp & 0x3000) != 0x0){
+            //DiagPrintf("32.768 Calibration Success\n", Ttemp);
+            break;
+        }
+        else {
+            Ttemp++;
+            HalDelayUs(30);
+            //DiagPrintf("Check lock: %d\n", Ttemp);
+            //DiagPrintf("0x278: %x\n", Rtemp);
+            if (Ttemp > 100000) { /*Delay 100ms*/            
+                DiagPrintf("32K Calibration Fail!!\n", Ttemp);
+                break;
+            }
+        }
+    }
+}
+
+#if CONFIG_WDG
+WDG_ADAPTER          WDGAdapter;
+extern HAL_TIMER_OP HalTimerOp;
+
+#ifdef CONFIG_WDG_NORMAL
+VOID
+WDGInitial(
+    IN  u32 Period
+)
+{
+    u8 CountId;
+    u16 DivFactor;
+    u32 CountTemp; 
+    u32 CountProcess = 0;
+    u32 DivFacProcess = 0;
+    u32 PeriodProcess = 100*Period;
+    u32 MinPeriodTemp = 0xFFFFFFFF;
+    u32 PeriodTemp = 0;
+    u32 *Reg = (u32*)&(WDGAdapter.Ctrl);
+    
+    DBG_8195A(" Period = 0x%08x\n", Period);
+
+    for (CountId = 0; CountId < 12; CountId++) {
+        CountTemp = ((0x00000001 << (CountId+1))-1);
+        DivFactor = (u16)((PeriodProcess)/(CountTemp*3));
+        
+        if (DivFactor > 0) {
+            PeriodTemp = 3*(DivFactor+1)*CountTemp;
+            if (PeriodProcess < PeriodTemp) {
+                if (MinPeriodTemp > PeriodTemp) {
+                    MinPeriodTemp = PeriodTemp;
+                    CountProcess = CountId;
+                    DivFacProcess = DivFactor;
+                }
+            }
+        }
+    }
+
+    DBG_8195A("WdgScalar = 0x%08x\n", DivFacProcess);
+    DBG_8195A("WdgCunLimit = 0x%08x\n", CountProcess);
+
+    WDGAdapter.Ctrl.WdgScalar   = DivFacProcess;
+    WDGAdapter.Ctrl.WdgEnByte   = 0;
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    WDGAdapter.Ctrl.WdgCunLimit = CountProcess;
+    WDGAdapter.Ctrl.WdgMode     = RESET_MODE;
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+
+    HAL_WRITE32(VENDOR_REG_BASE, 0, (*Reg));
+    
+}
+
+VOID
+WDGIrqHandle
+(
+    IN  VOID        *Data
+)
+{
+    u32 temp;
+    WDG_REG *CtrlReg;
+
+    if (NULL != WDGAdapter.UserCallback) {
+        WDGAdapter.UserCallback(WDGAdapter.callback_id);
+    }
+
+    // Clear ISR
+    temp = HAL_READ32(VENDOR_REG_BASE, 0);
+    CtrlReg = (WDG_REG*)&temp;
+    CtrlReg->WdgToISR    = 1;    // write 1 clear
+    HAL_WRITE32(VENDOR_REG_BASE, 0, (temp));
+}
+
+VOID
+WDGIrqInitial(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    
+    WDGAdapter.IrqHandle.Data = (u32)&WDGAdapter;
+    WDGAdapter.IrqHandle.IrqFun = (IRQ_FUN)WDGIrqHandle;
+    WDGAdapter.IrqHandle.IrqNum = WDG_IRQ;
+    WDGAdapter.IrqHandle.Priority = 0;
+         
+    InterruptRegister(&(WDGAdapter.IrqHandle));
+    InterruptEn(&(WDGAdapter.IrqHandle));
+
+    WDGAdapter.Ctrl.WdgToISR    = 1;    // clear ISR first
+    WDGAdapter.Ctrl.WdgMode     = INT_MODE;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+}
+
+VOID
+WDGStart(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgEnByte    = 0xA5;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+VOID
+WDGStop(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgEnByte    = 0;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+VOID
+WDGRefresh(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+} 
+
+VOID
+WDGIrqCallBackReg(
+    IN VOID *CallBack,
+    IN u32   Id
+)
+{
+    WDGAdapter.UserCallback = (VOID (*)(u32))CallBack;
+    WDGAdapter.callback_id = Id;
+} 
+
+#endif
+
+#ifdef CONFIG_WDG_TEST
+VOID
+WDGIrqHandle
+(
+    IN  VOID        *Data
+)
+{
+}
+
+
+VOID
+WDGGtimerHandle
+(
+    IN  VOID        *Data
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    DBG_8195A("reset WDG\n");
+    if (HAL_READ32(SYSTEM_CTRL_BASE,REG_SYS_DSTBY_INFO2) == 0) {
+        HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+    }
+}
+
+
+VOID
+InitWDGIRQ(VOID)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    
+    WDGAdapter.Ctrl.WdgScalar   = 0x96;
+    WDGAdapter.Ctrl.WdgEnByte   = 0xA5;
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    WDGAdapter.Ctrl.WdgCunLimit = CNTFFFH;
+    WDGAdapter.Ctrl.WdgMode     = RESET_MODE;
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+
+    if (WDGAdapter.Ctrl.WdgMode == INT_MODE) {
+        
+        WDGAdapter.IrqHandle.Data = NULL;
+        WDGAdapter.IrqHandle.IrqFun = (IRQ_FUN)WDGIrqHandle;
+        WDGAdapter.IrqHandle.IrqNum = WDG_IRQ;
+        WDGAdapter.IrqHandle.Priority = 0;
+             
+        InterruptRegister(&(WDGAdapter.IrqHandle));
+        InterruptEn(&(WDGAdapter.IrqHandle));
+    }
+    else {
+        
+        WDGAdapter.WdgGTimer.TimerIrqPriority   = 0;
+        WDGAdapter.WdgGTimer.TimerMode          = USER_DEFINED;
+        WDGAdapter.WdgGTimer.IrqDis             = OFF;
+        WDGAdapter.WdgGTimer.TimerId            = 2;//
+        WDGAdapter.WdgGTimer.IrqHandle.IrqFun   = (IRQ_FUN)WDGGtimerHandle;
+        WDGAdapter.WdgGTimer.IrqHandle.IrqNum   = TIMER2_7_IRQ;
+        WDGAdapter.WdgGTimer.IrqHandle.Priority = 0;
+        WDGAdapter.WdgGTimer.IrqHandle.Data     = NULL;
+        
+        if ((WDGAdapter.Ctrl.WdgCunLimit == CNTFFFH)&&(WDGAdapter.Ctrl.WdgScalar >= 0x8429)){
+            WDGAdapter.WdgGTimer.TimerLoadValueUs = 0xFFFFFFFF - WDGTIMERELY;
+        }
+        else {
+            WDGAdapter.WdgGTimer.TimerLoadValueUs   = (BIT0 << (WDGAdapter.Ctrl.WdgCunLimit+1))
+                *WDGAdapter.Ctrl.WdgScalar*TIMER_TICK_US - WDGTIMERELY;
+        }
+
+        HalTimerOp.HalTimerInit((VOID*) &(WDGAdapter.WdgGTimer));
+    }
+    //fill reg
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+
+//WDG
+VOID HalWdgInit(
+    VOID
+)
+{
+        
+}
+#endif  //CONFIG_WDG_TEST
+#endif  //CONFIG_WDG
+#endif  //#ifdef CONFIG_TIMER_MODULE

lib/fwlib/src/hal_common.c

@@ -0,0 +1,23 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+#include "hal_common.h"
+
+extern HAL_TIMER_OP        HalTimerOp;
+
+HAL_Status 
+HalCommonInit(void){
+
+#ifdef CONFIG_TIMER_MODULE
+    HalTimerOpInit_Patch((VOID*)(&HalTimerOp));
+#endif
+
+    return HAL_OK;
+}

lib/fwlib/src/hal_gdma.c

@@ -0,0 +1,574 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "hal_gdma.h"
+
+#define MAX_GDMA_INDX       1
+#define MAX_GDMA_CHNL       6
+
+static u8 HalGdmaReg[MAX_GDMA_INDX+1];
+
+const HAL_GDMA_CHNL GDMA_Chnl_Option[] = { 
+        {0,0,GDMA0_CHANNEL0_IRQ,0},
+        {1,0,GDMA1_CHANNEL0_IRQ,0},
+        {0,1,GDMA0_CHANNEL1_IRQ,0},
+        {1,1,GDMA1_CHANNEL1_IRQ,0},
+        {0,2,GDMA0_CHANNEL2_IRQ,0},
+        {1,2,GDMA1_CHANNEL2_IRQ,0},
+        {0,3,GDMA0_CHANNEL3_IRQ,0},
+        {1,3,GDMA1_CHANNEL3_IRQ,0},
+        {0,4,GDMA0_CHANNEL4_IRQ,0},
+        {1,4,GDMA1_CHANNEL4_IRQ,0},
+        {0,5,GDMA0_CHANNEL5_IRQ,0},
+        {1,5,GDMA1_CHANNEL5_IRQ,0},
+        
+        {0xff,0,0,0}    // end
+};
+
+const HAL_GDMA_CHNL GDMA_Multi_Block_Chnl_Option[] = { 
+        {0,4,GDMA0_CHANNEL4_IRQ,0},
+        {1,4,GDMA1_CHANNEL4_IRQ,0},
+        {0,5,GDMA0_CHANNEL5_IRQ,0},
+        {1,5,GDMA1_CHANNEL5_IRQ,0},
+        
+        {0xff,0,0,0}    // end
+};
+
+
+const u16 HalGdmaChnlEn[6] = {
+    GdmaCh0, GdmaCh1, GdmaCh2, GdmaCh3,
+    GdmaCh4, GdmaCh5
+};
+
+
+    
+VOID HalGdmaOpInit(
+    IN  VOID *Data
+)
+{
+    PHAL_GDMA_OP pHalGdmaOp = (PHAL_GDMA_OP) Data;
+
+    pHalGdmaOp->HalGdmaOnOff = HalGdmaOnOffRtl8195a;
+    pHalGdmaOp->HalGdamChInit = HalGdamChInitRtl8195a;
+    pHalGdmaOp->HalGdmaChDis = HalGdmaChDisRtl8195a;
+    pHalGdmaOp->HalGdmaChEn = HalGdmaChEnRtl8195a;
+    pHalGdmaOp->HalGdmaChSeting = HalGdmaChSetingRtl8195a;
+#ifndef CONFIG_CHIP_E_CUT
+    pHalGdmaOp->HalGdmaChBlockSeting = HalGdmaChBlockSetingRtl8195a;
+#else
+    pHalGdmaOp->HalGdmaChBlockSeting = HalGdmaChBlockSetingRtl8195a_V04;
+#endif
+    pHalGdmaOp->HalGdmaChIsrEnAndDis = HalGdmaChIsrEnAndDisRtl8195a;
+    pHalGdmaOp->HalGdmaChIsrClean = HalGdmaChIsrCleanRtl8195a;
+    pHalGdmaOp->HalGdmaChCleanAutoSrc = HalGdmaChCleanAutoSrcRtl8195a;
+    pHalGdmaOp->HalGdmaChCleanAutoDst = HalGdmaChCleanAutoDstRtl8195a;
+}
+
+VOID HalGdmaOn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->GdmaOnOff = ON;
+    HalGdmaOnOffRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaOff(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->GdmaOnOff = OFF;
+    HalGdmaOnOffRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+BOOL HalGdmaChInit(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdamChInitRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+VOID HalGdmaChDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChEnRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+BOOL HalGdmaChSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdmaChSetingRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+BOOL HalGdmaChBlockSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+#ifndef CONFIG_CHIP_E_CUT
+    return (HalGdmaChBlockSetingRtl8195a((VOID*)pHalGdmaAdapter));
+#else
+    return (HalGdmaChBlockSetingRtl8195a_V04((VOID*)pHalGdmaAdapter));
+#endif
+}
+
+VOID HalGdmaChIsrEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    HalGdmaChIsrEnAndDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChIsrDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->IsrCtrl = DISABLE;
+    HalGdmaChIsrEnAndDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+u8 HalGdmaChIsrClean(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdmaChIsrCleanRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+VOID HalGdmaChCleanAutoSrc(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChCleanAutoSrcRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChCleanAutoDst(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChCleanAutoDstRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+HAL_Status HalGdmaChnlRegister (u8 GdmaIdx, u8 ChnlNum)
+{
+    u32 mask;
+
+    if ((GdmaIdx > MAX_GDMA_INDX) || (ChnlNum > MAX_GDMA_CHNL)) {
+        // Invalid GDMA Index or Channel Number
+        return HAL_ERR_PARA;
+    }
+
+    mask = 1 << ChnlNum;
+
+    if ((HalGdmaReg[GdmaIdx] & mask) != 0) {
+        return HAL_BUSY;
+    }
+    else {
+#if 1
+        if (HalGdmaReg[GdmaIdx] == 0) {
+            if (GdmaIdx == 0) {
+                ACTCK_GDMA0_CCTRL(ON);
+                GDMA0_FCTRL(ON);
+            }
+            else {
+                ACTCK_GDMA1_CCTRL(ON);
+                GDMA1_FCTRL(ON);
+            }
+        }
+#endif    
+        HalGdmaReg[GdmaIdx] |= mask;
+        return HAL_OK;
+    }
+}
+
+VOID HalGdmaChnlUnRegister (u8 GdmaIdx, u8 ChnlNum)
+{
+    u32 mask;
+
+    if ((GdmaIdx > MAX_GDMA_INDX) || (ChnlNum > MAX_GDMA_CHNL)) {
+        // Invalid GDMA Index or Channel Number
+        return;
+    }
+    
+    mask = 1 << ChnlNum;
+
+    HalGdmaReg[GdmaIdx] &= ~mask;
+#if 1
+    if (HalGdmaReg[GdmaIdx] == 0) {
+        if (GdmaIdx == 0) {
+            ACTCK_GDMA0_CCTRL(OFF);
+            GDMA0_FCTRL(OFF);
+        }
+        else {
+            ACTCK_GDMA1_CCTRL(OFF);
+            GDMA1_FCTRL(OFF);
+        }
+    }
+#endif    
+}
+
+PHAL_GDMA_CHNL HalGdmaChnlAlloc (HAL_GDMA_CHNL *pChnlOption)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pgdma_chnl = pChnlOption;
+    if (pChnlOption == NULL) {
+        // Use default GDMA Channel Option table
+        pgdma_chnl = (HAL_GDMA_CHNL*)&GDMA_Chnl_Option[0];
+    }
+    else{
+        pgdma_chnl = (HAL_GDMA_CHNL*) pgdma_chnl;
+    }
+
+    while (pgdma_chnl->GdmaIndx <= MAX_GDMA_INDX) {
+        if (HalGdmaChnlRegister(pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl) == HAL_OK) {
+            // This GDMA Channel is available
+            break;
+        }
+        pgdma_chnl += 1;
+    }
+
+    if (pgdma_chnl->GdmaIndx > MAX_GDMA_INDX) {
+        pgdma_chnl = NULL;
+    }
+    
+    return pgdma_chnl;
+}
+
+VOID HalGdmaChnlFree (HAL_GDMA_CHNL *pChnl)
+{
+    IRQ_HANDLE IrqHandle;
+
+    IrqHandle.IrqNum = pChnl->IrqNum;
+    InterruptDis(&IrqHandle);
+    InterruptUnRegister(&IrqHandle);
+    HalGdmaChnlUnRegister(pChnl->GdmaIndx, pChnl->GdmaChnl);
+}
+
+VOID HalGdmaMemIrqHandler(VOID *pData)
+{
+    PHAL_GDMA_OBJ pHalGdmaObj=(PHAL_GDMA_OBJ)pData;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    // Clean Auto Reload Bit
+    HalGdmaChCleanAutoDst((VOID*)pHalGdmaAdapter);
+
+    // Clear Pending ISR
+    HalGdmaChIsrClean((VOID*)pHalGdmaAdapter);
+
+    HalGdmaChDis((VOID*)(pHalGdmaAdapter));
+    pHalGdmaObj->Busy = 0;
+
+    if (pGdmaIrqHandle->IrqFun != NULL) {
+        pGdmaIrqHandle->IrqFun((VOID*)pGdmaIrqHandle->Data);
+    }
+}
+
+BOOL HalGdmaMemCpyAggrInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    IRQ_HANDLE IrqHandle;
+
+    pgdma_chnl = HalGdmaChnlAlloc((PHAL_GDMA_CHNL) &GDMA_Multi_Block_Chnl_Option[0]);    // get a whatever GDMA channel
+    if (NULL == pgdma_chnl) {        
+        DBG_GDMA_ERR("%s: Cannot allocate a GDMA Channel\n", __FUNCTION__);
+        return _FALSE;
+    }
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    
+    DBG_GDMA_INFO("%s: Use GDMA%d CH%d\n", __FUNCTION__, pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl);
+
+    _memset((void *)pHalGdmaAdapter, 0, sizeof(HAL_GDMA_ADAPTER));
+
+    pHalGdmaAdapter->GdmaCtl.TtFc = TTFCMemToMem;
+    pHalGdmaAdapter->GdmaCtl.Done = 1;
+    pHalGdmaAdapter->MuliBlockCunt = 0;
+    pHalGdmaAdapter->MaxMuliBlock = 1;
+    pHalGdmaAdapter->ChNum = pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIndex = pgdma_chnl->GdmaIndx;
+    pHalGdmaAdapter->ChEn = 0x0101 << pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIsrType = (TransferType|ErrType);
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    pHalGdmaAdapter->GdmaOnOff = ON;
+    pHalGdmaAdapter->GdmaCtl.IntEn      = 1;
+    pHalGdmaAdapter->Rsvd4to7 = 1;
+    pHalGdmaAdapter->Llpctrl = 1;
+    pGdmaIrqHandle->IrqNum = pgdma_chnl->IrqNum;
+    pGdmaIrqHandle->Priority = 0x10;
+
+    IrqHandle.IrqFun = (IRQ_FUN) HalGdmaMemIrqHandler;
+    IrqHandle.Data = (u32) pHalGdmaObj;
+    IrqHandle.IrqNum = pGdmaIrqHandle->IrqNum;
+    IrqHandle.Priority = pGdmaIrqHandle->Priority;
+
+    InterruptRegister(&IrqHandle);
+    InterruptEn(&IrqHandle);
+    pHalGdmaObj->Busy = 0;
+    
+    return _TRUE;
+}
+
+
+VOID HalGdmaMultiBlockSetting(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    u8 BlockNumber;
+    u8 BlockIndex;
+    u8 FourBytesAlign;
+
+    BlockNumber = pHalGdmaObj->BlockNum;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    pHalGdmaAdapter->GdmaCtl.LlpSrcEn = 1;
+    pHalGdmaAdapter->GdmaCtl.LlpDstEn = 1;
+
+    if(((pHalGdmaBlock[0].SrcAddr & 0x03) == 0) &&((pHalGdmaBlock[0].DstAddr & 0x03) == 0) 
+        && ((pHalGdmaBlock[0].BlockLength & 0X03) == 0)){   
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes; 
+        FourBytesAlign = 1;
+    }
+    else{
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+        FourBytesAlign = 0;
+    }
+    
+    for(BlockIndex = 0; BlockIndex < BlockNumber; BlockIndex++){
+       
+        pHalGdmaObj->GdmaChLli[BlockIndex].Sarx = pHalGdmaBlock[BlockIndex].SrcAddr;
+        pHalGdmaObj->GdmaChLli[BlockIndex].Darx = pHalGdmaBlock[BlockIndex].DstAddr;
+        pHalGdmaObj->BlockSizeList[BlockIndex].pNextBlockSiz = &pHalGdmaObj->BlockSizeList[BlockIndex + 1];
+
+        if(FourBytesAlign){
+            pHalGdmaObj->BlockSizeList[BlockIndex].BlockSize = pHalGdmaBlock[BlockIndex].BlockLength >> 2;
+        }
+        else{
+            pHalGdmaObj->BlockSizeList[BlockIndex].BlockSize = pHalGdmaBlock[BlockIndex].BlockLength;
+        }
+        
+        pHalGdmaObj->Lli[BlockIndex].pLliEle = (GDMA_CH_LLI_ELE*) &pHalGdmaObj->GdmaChLli[BlockIndex];
+        pHalGdmaObj->Lli[BlockIndex].pNextLli = &pHalGdmaObj->Lli[BlockIndex + 1];
+
+
+        if(BlockIndex == BlockNumber - 1){
+            pHalGdmaObj->BlockSizeList[BlockIndex].pNextBlockSiz = NULL;
+            pHalGdmaObj->Lli[BlockIndex].pNextLli = NULL;
+        }
+        //DBG_GDMA_INFO("Lli[%d].pLiEle = %x\r\n", BlockIndex,Lli[BlockIndex].pLliEle);
+        //DBG_GDMA_INFO("Lli[%d].pNextLli = %x\r\n", BlockIndex,Lli[BlockIndex].pNextLli);
+    }
+
+    pHalGdmaAdapter->pBlockSizeList = (struct BLOCK_SIZE_LIST*) &pHalGdmaObj->BlockSizeList;
+    pHalGdmaAdapter->pLlix = (struct GDMA_CH_LLI*) &pHalGdmaObj->Lli;
+    //DBG_GDMA_INFO("pHalGdmaAdapter->pBlockSizeList = %x\r\n", pHalGdmaAdapter->pBlockSizeList);
+    //DBG_GDMA_INFO("pHalGdmaAdapter->pLlix  = %x\r\n", pHalGdmaAdapter->pLlix );
+}
+
+VOID HalGdmaLLPMemAlign(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PGDMA_CH_LLI_ELE pLliEle;
+    struct GDMA_CH_LLI *pGdmaChLli;
+    struct BLOCK_SIZE_LIST *pGdmaChBkLi;
+    u32 CtlxLow;
+    u32 CtlxUp;
+    u8 BlockNumber;
+    u8 BlockIndex;
+    
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    BlockNumber = pHalGdmaObj->BlockNum;
+    
+    pLliEle = pHalGdmaAdapter->pLlix->pLliEle;
+    pGdmaChLli = pHalGdmaAdapter->pLlix->pNextLli;
+    pGdmaChBkLi = pHalGdmaAdapter->pBlockSizeList;
+    
+    //4 Move to the second block to configure Memory Alginment setting
+    pLliEle->Llpx = (u32) pGdmaChLli->pLliEle;
+    pGdmaChBkLi = pGdmaChBkLi ->pNextBlockSiz;
+    
+    for(BlockIndex = 1; BlockIndex < BlockNumber; BlockIndex++){
+        pLliEle = pGdmaChLli->pLliEle;
+        CtlxLow = pLliEle->CtlxLow;
+        CtlxLow &= (BIT_INVC_CTLX_LO_DST_TR_WIDTH & BIT_INVC_CTLX_LO_SRC_TR_WIDTH);
+        CtlxUp = pLliEle->CtlxUp;    
+        CtlxUp &= (BIT_INVC_CTLX_UP_BLOCK_BS);
+
+        if(((pHalGdmaBlock[BlockIndex].SrcAddr & 0x03) == 0) &&((pHalGdmaBlock[BlockIndex].DstAddr & 0x03) == 0) 
+            && ((pHalGdmaBlock[BlockIndex].BlockLength & 0X03) == 0)){
+            pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+            pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+            pGdmaChBkLi->BlockSize = pHalGdmaBlock[BlockIndex].BlockLength>> 2;
+
+        }
+        else{
+            pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+            pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+            pGdmaChBkLi->BlockSize = pHalGdmaBlock[BlockIndex].BlockLength;
+        }
+
+        CtlxLow |= (BIT_CTLX_LO_DST_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.DstTrWidth) |
+              BIT_CTLX_LO_SRC_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.SrcTrWidth));
+        CtlxUp |= BIT_CTLX_UP_BLOCK_BS(pGdmaChBkLi->BlockSize);  
+
+        pGdmaChLli = pGdmaChLli->pNextLli;
+        pGdmaChBkLi = pGdmaChBkLi->pNextBlockSiz;    
+        pLliEle->CtlxLow = CtlxLow;
+        pLliEle->CtlxUp = CtlxUp;
+        pLliEle->Llpx = (u32)(pGdmaChLli->pLliEle);
+
+    }
+}
+
+VOID HalGdmaMemAggr(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    
+    u8 BlockNumber;
+
+    BlockNumber = pHalGdmaObj->BlockNum;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    if (pHalGdmaObj->Busy) {
+        DBG_GDMA_ERR("%s: ==> GDMA is Busy\r\n", __FUNCTION__);
+        return;
+    }
+    pHalGdmaObj->Busy = 1;
+
+    pHalGdmaAdapter->MaxMuliBlock = BlockNumber;
+    pHalGdmaAdapter->ChSar = pHalGdmaBlock[0].SrcAddr;
+    pHalGdmaAdapter->ChDar = pHalGdmaBlock[0].DstAddr;
+    
+    HalGdmaMultiBlockSetting(pHalGdmaObj, pHalGdmaBlock);    
+    HalGdmaOn((pHalGdmaAdapter));
+    HalGdmaChIsrEn((pHalGdmaAdapter));
+    HalGdmaChBlockSeting((pHalGdmaAdapter));
+    HalGdmaLLPMemAlign(pHalGdmaObj, pHalGdmaBlock);
+    HalGdmaChEn((pHalGdmaAdapter));
+
+}
+
+
+
+BOOL HalGdmaMemCpyInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    IRQ_HANDLE IrqHandle;
+
+    pgdma_chnl = HalGdmaChnlAlloc(NULL);    // get a whatever GDMA channel
+    if (NULL == pgdma_chnl) {        
+        DBG_GDMA_ERR("%s: Cannot allocate a GDMA Channel\n", __FUNCTION__);
+        return _FALSE;
+    }
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    
+    DBG_GDMA_INFO("%s: Use GDMA%d CH%d\n", __FUNCTION__, pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl);
+#if 0
+    if (pgdma_chnl->GdmaIndx == 0) {
+        ACTCK_GDMA0_CCTRL(ON);
+        GDMA0_FCTRL(ON);
+    }
+    else if (pgdma_chnl->GdmaIndx == 1) {
+        ACTCK_GDMA1_CCTRL(ON);
+        GDMA1_FCTRL(ON);
+    }
+#endif    
+    _memset((void *)pHalGdmaAdapter, 0, sizeof(HAL_GDMA_ADAPTER));
+
+//    pHalGdmaAdapter->GdmaCtl.TtFc = TTFCMemToMem;
+    pHalGdmaAdapter->GdmaCtl.Done = 1;
+//    pHalGdmaAdapter->MuliBlockCunt = 0;
+//    pHalGdmaAdapter->MaxMuliBlock = 1;
+    pHalGdmaAdapter->ChNum = pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIndex = pgdma_chnl->GdmaIndx;
+    pHalGdmaAdapter->ChEn = 0x0101 << pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIsrType = (TransferType|ErrType);
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    pHalGdmaAdapter->GdmaOnOff = ON;
+
+    pHalGdmaAdapter->GdmaCtl.IntEn      = 1;
+//    pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+//    pHalGdmaAdapter->GdmaCtl.DestMsize  = MsizeEight;
+//    pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+//    pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+//    pHalGdmaAdapter->GdmaCtl.Dinc = IncType;
+//    pHalGdmaAdapter->GdmaCtl.Sinc = IncType;
+
+    pGdmaIrqHandle->IrqNum = pgdma_chnl->IrqNum;
+    pGdmaIrqHandle->Priority = 10;
+
+    IrqHandle.IrqFun = (IRQ_FUN) HalGdmaMemIrqHandler;
+    IrqHandle.Data = (u32) pHalGdmaObj;
+    IrqHandle.IrqNum = pGdmaIrqHandle->IrqNum;
+    IrqHandle.Priority = pGdmaIrqHandle->Priority;
+
+    InterruptRegister(&IrqHandle);
+    InterruptEn(&IrqHandle);
+    pHalGdmaObj->Busy = 0;
+    
+    return _TRUE;
+}
+
+VOID HalGdmaMemCpyDeInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL GdmaChnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+
+    GdmaChnl.GdmaIndx = pHalGdmaAdapter->GdmaIndex;
+    GdmaChnl.GdmaChnl = pHalGdmaAdapter->ChNum;
+    GdmaChnl.IrqNum = pGdmaIrqHandle->IrqNum;
+    HalGdmaChnlFree(&GdmaChnl);
+}
+
+// If multi-task using the same GDMA Object, then it needs a mutex to protect this procedure
+VOID* HalGdmaMemCpy(PHAL_GDMA_OBJ pHalGdmaObj, void* pDest, void* pSrc, u32 len)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+
+    if (pHalGdmaObj->Busy) {
+        DBG_GDMA_ERR("%s: ==> GDMA is Busy\r\n", __FUNCTION__);
+        return 0;
+    }
+    pHalGdmaObj->Busy = 1;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    DBG_GDMA_INFO("%s: ==> Src=0x%x Dst=0x%x Len=%d\r\n", __FUNCTION__, pSrc, pDest, len);
+    if ((((u32)pSrc & 0x03)==0) &&
+        (((u32)pDest & 0x03)==0) &&        
+        ((len & 0x03)== 0)) {
+        // 4-bytes aligned, move 4 bytes each transfer
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.BlockSize = len >> 2;
+    }
+    else {
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.BlockSize = len;
+    }
+
+    pHalGdmaAdapter->ChSar = (u32)pSrc;
+    pHalGdmaAdapter->ChDar = (u32)pDest;                
+    pHalGdmaAdapter->PacketLen = len;
+
+    HalGdmaOn((pHalGdmaAdapter));
+    HalGdmaChIsrEn((pHalGdmaAdapter));
+    HalGdmaChSeting((pHalGdmaAdapter));
+    HalGdmaChEn((pHalGdmaAdapter));
+
+    return (pDest);
+}

lib/fwlib/src/hal_gpio.c

@@ -0,0 +1,145 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_GPIO_EN
+
+HAL_GPIO_DATA_SECTION HAL_GPIO_ADAPTER gHAL_Gpio_Adapter;
+extern PHAL_GPIO_ADAPTER _pHAL_Gpio_Adapter;
+
+extern VOID GPIO_PullCtrl_8195a(u32 chip_pin, u8 pull_type);
+
+/**
+  * @brief  To get the GPIO IP Pin name for the given chip pin name
+  *
+  * @param  chip_pin: The chip pin name.
+  *
+  * @retval The gotten GPIO IP pin name
+  */
+HAL_GPIO_TEXT_SECTION u32 
+HAL_GPIO_GetPinName(
+    u32 chip_pin
+)
+{
+    return HAL_GPIO_GetIPPinName_8195a((u32)chip_pin);
+}
+
+/**
+  * @brief  Set the GPIO pad Pull type
+  *
+  *  @param    pin: The pin for pull type control.
+  *  @param    mode: the pull type for the pin.
+  *  @return   None
+  */
+VOID 
+HAL_GPIO_PullCtrl(
+    u32 pin,
+    u32 mode    
+)
+{
+    u8 pull_type;
+
+    DBG_GPIO_INFO("%s: pin=0x%x mode=%d\n ", __FUNCTION__, (u32)pin, (u32)mode);
+
+    switch (mode) {
+        case hal_PullNone:
+            pull_type = DIN_PULL_NONE;
+            break;
+            
+        case hal_PullDown:
+            pull_type = DIN_PULL_LOW;
+            break;
+            
+        case hal_PullUp:
+            pull_type = DIN_PULL_HIGH;
+            break;
+            
+        case hal_OpenDrain:
+        default:
+            pull_type = DIN_PULL_NONE;
+            break;
+    }
+
+//    HAL_GPIO_PullCtrl_8195a (pin, pull_type);
+    GPIO_PullCtrl_8195a (pin, pull_type);
+}
+
+
+/**
+  * @brief  Initializes a GPIO Pin by the GPIO_Pin parameters.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin initialization.
+  *
+  * @retval HAL_Status
+  */
+HAL_GPIO_TEXT_SECTION VOID 
+HAL_GPIO_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    if (_pHAL_Gpio_Adapter == NULL) {
+        _pHAL_Gpio_Adapter = &gHAL_Gpio_Adapter;
+        DBG_GPIO_INFO("%s: Initial GPIO Adapter\n ", __FUNCTION__);
+    }
+
+    HAL_GPIO_Init_8195a(GPIO_Pin);
+}
+
+/**
+  * @brief  Initializes a GPIO Pin as a interrupt signal
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin initialization.
+  *
+  * @retval HAL_Status
+  */
+VOID 
+HAL_GPIO_Irq_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    if (_pHAL_Gpio_Adapter == NULL) {
+        _pHAL_Gpio_Adapter = &gHAL_Gpio_Adapter;
+        DBG_GPIO_INFO("%s: Initial GPIO Adapter\n ", __FUNCTION__);
+    }
+
+    if (_pHAL_Gpio_Adapter->IrqHandle.IrqFun == NULL) {
+        _pHAL_Gpio_Adapter->IrqHandle.IrqFun = HAL_GPIO_MbedIrqHandler_8195a;
+        _pHAL_Gpio_Adapter->IrqHandle.Priority = 8;
+        HAL_GPIO_RegIrq_8195a(&_pHAL_Gpio_Adapter->IrqHandle);        
+        InterruptEn(&_pHAL_Gpio_Adapter->IrqHandle);
+        DBG_GPIO_INFO("%s: Initial GPIO IRQ Adapter\n ", __FUNCTION__);
+    }
+
+    DBG_GPIO_INFO("%s: GPIO(name=0x%x)(mode=%d)\n ", __FUNCTION__, GPIO_Pin->pin_name, 
+        GPIO_Pin->pin_mode);
+    HAL_GPIO_MaskIrq_8195a(GPIO_Pin);
+    HAL_GPIO_Init_8195a(GPIO_Pin);
+}
+
+/**
+  * @brief  UnInitial GPIO Adapter
+  *
+  *
+  * @retval HAL_Status
+  */
+VOID
+HAL_GPIO_IP_DeInit(
+    VOID
+)
+{
+    if (_pHAL_Gpio_Adapter != NULL) {
+        InterruptDis(&_pHAL_Gpio_Adapter->IrqHandle);
+        HAL_GPIO_UnRegIrq_8195a(&_pHAL_Gpio_Adapter->IrqHandle);                
+        _pHAL_Gpio_Adapter = NULL;
+    }
+    
+}
+
+#endif // CONFIG_GPIO_EN