# Board: NodeMCU v2 (ESP8266) (NodeMCU)
# Definition: definitions/boards/nodemcuv2/manifest.yaml

esphome:
  name: trabantlux-1
  friendly_name: TrabantLux-1
  on_boot:
    priority: 30
    then:
      - light.turn_on:
          id: light_white
          brightness: 33%

  
esp8266:
  board: nodemcuv2

logger:

api:
  encryption:
    key: "JMbOQuANui4S5yDzat0wWVXrhmUO6cpBW2pjBsjRBO4="

ota:
  - platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:
    ssid: TrabantLux-1 Fallback Hotspot
    password: "oftmAcVPECTy"

uart:
  tx_pin: GPIO2
  baud_rate: 115200
  id: lamp_uart


light:
  - platform: monochromatic
    name: "Lampe"
    id: light_white
    output: lamp_output
    gamma_correct: 1.0

#  - platform: esp32_rmt_led_strip
  - platform: neopixelbus
    type: GRBW
    variant: WS2812
    pin: GPIO4
    num_leds: 240
    name: "NeoPixel Light"

output:
  - platform: template
    id: lamp_output
    type: float
    write_action:
      - lambda: |-
          static int last_value = 0xffff;
          uint16_t value = (uint16_t)(state * 255.0f);
          if (value == last_value) return;
          last_value = value;
          
          uint8_t hi = (value >> 8) & 0xFF;
          uint8_t lo = value & 0xFF;

          uint8_t data[] = {0x80, lo, 0x00};
          id(lamp_uart).write_array(data, sizeof(data));