stash

firmware/app.cpp

@@ -0,0 +1,261 @@
+/* Example SPI transfert
+ *
+ * This sample code is in the public domain.
+ */
+#include "espressif/esp_common.h"
+#include "esp/uart.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "esp8266.h"
+#include <stdio.h>
+#include "esp/spi.h"
+#include "math.h"
+#include <time.h>
+
+#define DAYTIME(h,m,s) (h*3600+m*60+s)
+
+struct {
+	time_t sunrise_start = DAYTIME(5,30,0);
+	time_t sunrise_end = DAYTIME(6,0,0);
+	time_t sunrise_shutdown = DAYTIME(7,0,0);
+	time_t sunset_time = DAYTIME(22,0,0);
+} settings;
+
+
+
+struct {
+	uint8_t r = 255;
+	uint8_t g = 160;
+	uint8_t b = 80;
+} white;
+
+time_t day_seconds() {
+    time_t t1, t2;
+    struct tm tms;
+    time(&t1);
+    localtime_r(&t1, &tms);
+    tms.tm_hour = 0;
+    tms.tm_min = 0;
+    tms.tm_sec = 0;
+    t2 = mktime(&tms);
+    return t1 - t2;
+}
+ 
+struct led_t{
+	struct {
+		unsigned int mod : 5, marker : 3;
+	} __attribute__((packed)) global = {0x1F, 0x7};
+	uint8_t b = 0;
+	uint8_t g = 0;
+	uint8_t r = 0;
+};
+
+led_t leds[4][10];
+
+float square(float x){
+	return x*x;
+}
+
+float lerp(float a, float b, float x){
+	return (1.-x)*a + x *b;
+}
+
+float clamp(float x, float a, float b){
+	if(x<a)
+		return a;
+	if(x>b)
+		return b;
+	return x;
+}
+
+float fade(float x, float offset, float factor){
+	float val = (x*factor-offset);
+	return lerp(square(clamp(val,0,1)),square(1-clamp(1-val,0,1)),val);
+}
+
+void write_leds(){
+        spi_transfer_32(1, 0x00000000);
+        for(int i = 0; i < 10; i++)
+			spi_transfer_32(1, *(uint32_t*)&leds[0][i]);
+        for(int i = 0; i < 10; i++)
+			spi_transfer_32(1, *(uint32_t*)&leds[1][9-i]);
+        for(int i = 0; i < 10; i++)
+			spi_transfer_32(1, *(uint32_t*)&leds[2][i]);
+        for(int i = 0; i < 10; i++)
+			spi_transfer_32(1, *(uint32_t*)&leds[3][9-i]);
+        spi_transfer_32(1, 0xFFFFFFFF);
+        spi_transfer_32(1, 0xFFFFFFFF);
+}
+
+enum state_t{ BOOT_S, SUNRISE_S, MORNING_S, DAY_S, NIGHT_S };
+
+state_t s = BOOT_S;
+
+bool maual_mode = false;
+
+extern "C" void manual_switch(){
+	
+	maual_mode = !maual_mode;
+	
+	printf("%d\n", (int)maual_mode);
+	
+	if(maual_mode){
+			
+		if(s == NIGHT_S){
+				
+			for(int j = 0; j < 4; j++)
+				for(int i = 0; i < 8; i+=2){
+					leds[j][i].global.mod = 2;
+					leds[j][i].r = 128;
+					leds[j][i].g = 30;
+					leds[j][i].b = 15;
+				}
+		}else{
+		
+			for(int j = 0; j < 4; j++)
+				for(int i = 0; i < 10; i++){
+					leds[j][i].global.mod = 31;
+					leds[j][i].r = white.r;
+					leds[j][i].g = white.g;
+					leds[j][i].b = white.b;
+				}
+		}
+		
+		write_leds();
+		
+	}else{
+		for(int j = 0; j < 4; j++)
+			for(int i = 0; i < 10; i++){
+				leds[j][i].global.mod = 0;
+				leds[j][i].r = 0;
+				leds[j][i].g = 0;
+				leds[j][i].b = 0;
+			}
+		write_leds();
+	}
+}
+
+void loop(void *pvParameters)
+{
+	spi_init(1, SPI_MODE0, SPI_FREQ_DIV_1M, 1, SPI_LITTLE_ENDIAN, false);
+	
+	while(1){
+		
+		time_t rt = day_seconds();
+		
+		if(maual_mode){
+			
+			if(s == NIGHT_S){
+				
+				for(int j = 0; j < 4; j++)
+					for(int i = 0; i < 8; i+=2){
+						leds[j][i].global.mod = 2;
+						leds[j][i].r = 128;
+						leds[j][i].g = 30;
+						leds[j][i].b = 15;
+					}
+			}else{
+			
+				for(int j = 0; j < 4; j++)
+					for(int i = 0; i < 10; i++){
+						leds[j][i].global.mod = 31;
+						leds[j][i].r = white.r;
+						leds[j][i].g = white.g;
+						leds[j][i].b = white.b;
+					}
+			}
+				
+			write_leds();
+			
+		}else{
+			
+			if( s == BOOT_S ) {
+				if( rt >= settings.sunrise_start ) {
+					s = SUNRISE_S;
+					printf("SUNRISE_S\n");
+				}
+				if( rt >= settings.sunrise_end ) {
+					s = MORNING_S;
+					printf("MORNING_S\n");
+				}
+			} else if( s == SUNRISE_S ){
+				if( rt >= settings.sunrise_end ) {
+					s = MORNING_S;
+					printf("MORNING_S\n");
+				}else{
+					int steps = (settings.sunrise_end - settings.sunrise_start)*(1000/50);
+					int t = (rt - settings.sunrise_start)*(1000/50);
+					for(; t < steps && !maual_mode; t++) {
+						
+						for(int j = 0; j < 4; j++)
+							for(int i = 0; i < 10; i++){
+								float val = (-i*30.+t*3.*(4./5.))/(float)steps;
+								leds[j][i].global.mod = 8 + fade(val,0.,0.5)*23;
+								leds[j][i].r = fade(val,0.01,1.) * white.r;
+								leds[j][i].g = fade(val,0.1,0.5) * white.g;
+								leds[j][i].b = fade(val,0.6,0.7) * white.b;
+							}
+						
+						write_leds();
+						
+						if ((t%25)==0) {
+							
+							printf("Time: %d%% %d %d/%d\n", (t*100)/steps, (int)day_seconds(), t, steps);
+							printf("%d %d %d %d\n",
+								leds[0][0].global.mod,
+								leds[0][0].r,
+								leds[0][0].g,
+								leds[0][0].b);
+						}
+						
+						vTaskDelay(50/portTICK_PERIOD_MS);
+					}
+				}
+			} else if( s == MORNING_S ) {
+				if( rt >= settings.sunrise_shutdown ) {
+					s = DAY_S;
+					printf("DAY_S\n");
+				}else{
+					for(int j = 0; j < 4; j++)
+						for(int i = 0; i < 10; i++){
+							leds[j][i].global.mod = 31;
+							leds[j][i].r = white.r;
+							leds[j][i].g = white.g;
+							leds[j][i].b = white.b;
+						}
+					write_leds();
+				}
+			} else if( s == DAY_S ) {
+				if( rt >= settings.sunset_time ) {
+					s = NIGHT_S;
+					printf("NIGHT_S\n");
+				}else{
+					for(int j = 0; j < 4; j++)
+						for(int i = 0; i < 10; i++){
+							leds[j][i].global.mod = 0;
+							leds[j][i].r = 0;
+							leds[j][i].g = 0;
+							leds[j][i].b = 0;
+						}
+					
+					write_leds();
+				}
+			} else if( s == NIGHT_S ) {
+				if( rt >= settings.sunrise_start && rt < settings.sunset_time) {
+					s = SUNRISE_S;
+					printf("SUNRISE_S\n");
+				}
+			}
+			
+		}
+		
+		vTaskDelay(1000/portTICK_PERIOD_MS);
+		
+	}
+}
+
+
+extern "C" void register_app(void)
+{
+    xTaskCreate(loop, "loop", 1024, NULL, 2, NULL);
+}

firmware/config.sample

@@ -0,0 +1,7 @@
+sunrise_start: time
+sunrise_end: time
+sunrise_shutdown: time
+sunrise_color: color
+sunrise_fade: linear, ease, ease_in, ease_out
+sunset_time: time
+night_color: color

firmware/fiatlux.c

@@ -1,15 +1,317 @@
+#include <espressif/esp_common.h>
+#include <esp8266.h>
+#include <esp/uart.h>
+#include <string.h>
+#include <stdio.h>
+#include <FreeRTOS.h>
+#include <task.h>
+#include <ssid_config.h>
+#include <httpd/httpd.h>
+#include <sys/time.h>
+
+#include <lwip/err.h>
+#include <lwip/sockets.h>
+#include <lwip/sys.h>
+#include <lwip/netdb.h>
+#include <lwip/dns.h>
+
 #include "system.h"
 #include "wifi.h"
 #include "web.h"
 #include "mqtt.h"
 #include "lux.h"
 
-#include <stdio.h>
+#define LED_PIN 2
-#include <FreeRTOS.h>
+#define SWITCH_PIN 2
-#include <task.h>
 
-#include <espressif/esp_common.h>
+/* Add extras/sntp component to makefile for this include to work */
-#include <esp/uart.h>
+#include <sntp.h>
+#include <time.h>
+
+#define SNTP_SERVERS 	"0.pool.ntp.org", "1.pool.ntp.org", \
+						"2.pool.ntp.org", "3.pool.ntp.org"
+
+#define vTaskDelayMs(ms)	vTaskDelay((ms)/portTICK_PERIOD_MS)
+#define UNUSED_ARG(x)	(void)x
+
+
+const gpio_inttype_t int_type = GPIO_INTTYPE_EDGE_NEG;
+
+enum {
+    SSI_WALLTIME,
+    SSI_UPTIME,
+    SSI_FREE_HEAP,
+    SSI_LED_STATE
+};
+
+
+int32_t ssi_handler(int32_t iIndex, char *pcInsert, int32_t iInsertLen)
+{
+	struct timeval tv;
+			
+    switch (iIndex) {
+        case SSI_WALLTIME:
+			gettimeofday(&tv, NULL);
+            snprintf(pcInsert, iInsertLen, "%d",
+                    (int)tv.tv_sec);
+            break;
+        case SSI_UPTIME:
+            snprintf(pcInsert, iInsertLen, "%d",
+                    xTaskGetTickCount() * portTICK_PERIOD_MS / 1000);
+            break;
+        case SSI_FREE_HEAP:
+            snprintf(pcInsert, iInsertLen, "%d", (int) xPortGetFreeHeapSize());
+            break;
+        case SSI_LED_STATE:
+            snprintf(pcInsert, iInsertLen, (GPIO.OUT & BIT(LED_PIN)) ? "Off" : "On");
+            break;
+        default:
+            snprintf(pcInsert, iInsertLen, "N/A");
+            break;
+    }
+
+    /* Tell the server how many characters to insert */
+    return (strlen(pcInsert));
+}
+
+const char *gpio_cgi_handler(int iIndex, int iNumParams, char *pcParam[], char *pcValue[])
+{
+    for (int i = 0; i < iNumParams; i++) {
+        if (strcmp(pcParam[i], "on") == 0) {
+            uint8_t gpio_num = atoi(pcValue[i]);
+            gpio_enable(gpio_num, GPIO_OUTPUT);
+            gpio_write(gpio_num, true);
+        } else if (strcmp(pcParam[i], "off") == 0) {
+            uint8_t gpio_num = atoi(pcValue[i]);
+            gpio_enable(gpio_num, GPIO_OUTPUT);
+            gpio_write(gpio_num, false);
+        } else if (strcmp(pcParam[i], "toggle") == 0) {
+            uint8_t gpio_num = atoi(pcValue[i]);
+            gpio_enable(gpio_num, GPIO_OUTPUT);
+            gpio_toggle(gpio_num);
+        }
+    }
+    return "/index.ssi";
+}
+
+const char *about_cgi_handler(int iIndex, int iNumParams, char *pcParam[], char *pcValue[])
+{
+    return "/about.html";
+}
+
+const char *websocket_cgi_handler(int iIndex, int iNumParams, char *pcParam[], char *pcValue[])
+{
+    return "/websockets.html";
+}
+
+void websocket_task(void *pvParameter)
+{
+    struct tcp_pcb *pcb = (struct tcp_pcb *) pvParameter;
+
+    for (;;) {
+        if (pcb == NULL || pcb->state != ESTABLISHED) {
+            printf("Connection closed, deleting task\n");
+            break;
+        }
+        
+		struct timeval tv;
+		gettimeofday(&tv, NULL);
+
+        int uptime = xTaskGetTickCount() * portTICK_PERIOD_MS / 1000;
+        int heap = (int) xPortGetFreeHeapSize();
+        int led = !gpio_read(LED_PIN);
+
+        /* Generate response in JSON format */
+        char response[64];
+        int len = snprintf(response, sizeof (response),
+                "{\"walltime\" : \"%d\","
+                "\"uptime\" : \"%d\","
+                " \"heap\" : \"%d\","
+                " \"led\" : \"%d\"}", (int)tv.tv_sec, uptime, heap, led);
+        if (len < sizeof (response))
+            websocket_write(pcb, (unsigned char *) response, len, WS_TEXT_MODE);
+
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+    }
+
+    vTaskDelete(NULL);
+}
+
+/**
+ * This function is called when websocket frame is received.
+ *
+ * Note: this function is executed on TCP thread and should return as soon
+ * as possible.
+ */
+void websocket_cb(struct tcp_pcb *pcb, uint8_t *data, u16_t data_len, uint8_t mode)
+{
+    printf("[websocket_callback]:\n%.*s\n", (int) data_len, (char*) data);
+
+    uint8_t response[2];
+    uint16_t val;
+
+    switch (data[0]) {
+        case 'A': // ADC
+            /* This should be done on a separate thread in 'real' applications */
+            val = sdk_system_adc_read();
+            break;
+        case 'D': // Disable LED
+            gpio_write(LED_PIN, true);
+            val = 0xDEAD;
+            break;
+        case 'E': // Enable LED
+            gpio_write(LED_PIN, false);
+            val = 0xBEEF;
+            break;
+        default:
+            printf("Unknown command\n");
+            val = 0;
+            break;
+    }
+
+    response[1] = (uint8_t) val;
+    response[0] = val >> 8;
+
+    websocket_write(pcb, response, 2, WS_BIN_MODE);
+}
+
+/**
+ * This function is called when new websocket is open and
+ * creates a new websocket_task if requested URI equals '/stream'.
+ */
+void websocket_open_cb(struct tcp_pcb *pcb, const char *uri)
+{
+    printf("WS URI: %s\n", uri);
+    if (!strcmp(uri, "/stream")) {
+        printf("request for streaming\n");
+        xTaskCreate(&websocket_task, "websocket_task", 256, (void *) pcb, 2, NULL);
+    }
+}
+
+void httpd_task(void *pvParameters)
+{
+    tCGI pCGIs[] = {
+        {"/gpio", (tCGIHandler) gpio_cgi_handler},
+        {"/about", (tCGIHandler) about_cgi_handler},
+        {"/websockets", (tCGIHandler) websocket_cgi_handler},
+    };
+
+    const char *pcConfigSSITags[] = {
+        "walltime", // SSI_WALLTIME
+        "uptime", // SSI_UPTIME
+        "heap",   // SSI_FREE_HEAP
+        "led"     // SSI_LED_STATE
+    };
+
+    /* register handlers and start the server */
+    http_set_cgi_handlers(pCGIs, sizeof (pCGIs) / sizeof (pCGIs[0]));
+    http_set_ssi_handler((tSSIHandler) ssi_handler, pcConfigSSITags,
+            sizeof (pcConfigSSITags) / sizeof (pcConfigSSITags[0]));
+    websocket_register_callbacks((tWsOpenHandler) websocket_open_cb,
+            (tWsHandler) websocket_cb);
+    httpd_init();
+
+    for (;;);
+}
+
+
+void sntp_tsk(void *pvParameters)
+{
+	const char *servers[] = {SNTP_SERVERS};
+	UNUSED_ARG(pvParameters);
+
+	/* Wait until we have joined AP and are assigned an IP */
+	while (sdk_wifi_station_get_connect_status() != STATION_GOT_IP) {
+		vTaskDelayMs(100);
+	}
+
+	/* Start SNTP */
+	printf("Starting SNTP... ");
+	/* SNTP will request an update each 5 minutes */
+	sntp_set_update_delay(5*60000);
+	/* Set GMT+1 zone, daylight savings off */
+	const struct timezone tz = {1*60, 1};
+	/* SNTP initialization */
+	sntp_initialize(&tz);
+	/* Servers must be configured right after initialization */
+	sntp_set_servers(servers, sizeof(servers) / sizeof(char*));
+	printf("DONE!\n");
+
+	/* Print date and time each 5 seconds */
+	while(1) {
+		vTaskDelayMs(5000);
+		//time_t ts = time(NULL);
+		//int t = ts;
+		//printf("TIME: %d %d %s", t,(int) day_seconds(), ctime(&ts));
+	}
+}
+
+
+void gpio_intr_handler(uint8_t gpio_num);
+
+void manual_switch(void);
+
+void buttonIntTask(void *pvParameters)
+{
+    printf("Waiting for button press interrupt on gpio %d...\r\n", SWITCH_PIN);
+    QueueHandle_t *tsqueue = (QueueHandle_t *)pvParameters;
+    gpio_set_interrupt(SWITCH_PIN, int_type, gpio_intr_handler);
+
+    uint32_t last = 0;
+    while(1) {
+        uint32_t button_ts;
+        xQueueReceive(*tsqueue, &button_ts, portMAX_DELAY);
+        button_ts *= portTICK_PERIOD_MS;
+        if(last < button_ts-200) {
+			manual_switch();
+            //printf("Button interrupt fired at %dms\r\n", button_ts);
+            last = button_ts;
+        }
+    }
+}
+
+static QueueHandle_t tsqueue;
+
+void gpio_intr_handler(uint8_t gpio_num)
+{
+    uint32_t now = xTaskGetTickCountFromISR();
+    xQueueSendToBackFromISR(tsqueue, &now, NULL);
+}
+
+void register_app(void);
+
+void user_init(void)
+{
+    uart_set_baud(0, 115200);
+    printf("SDK version:%s\n", sdk_system_get_sdk_version());
+
+    struct sdk_station_config config = {
+        .ssid = WIFI_SSID,
+        .password = WIFI_PASS,
+    };
+
+    /* required to call wifi_set_opmode before station_set_config */
+    sdk_wifi_set_opmode(STATION_MODE);
+    sdk_wifi_station_set_config(&config);
+    //netif_set_hostname(netif_default, "nachtlicht");
+    sdk_wifi_station_connect();
+
+    /* turn off LED */
+    gpio_enable(LED_PIN, GPIO_OUTPUT);
+    gpio_write(LED_PIN, true);
+    
+    
+    gpio_enable(SWITCH_PIN, GPIO_INPUT);
+    
+    tsqueue = xQueueCreate(2, sizeof(uint32_t));
+    //xTaskCreate(buttonIntTask, "buttonIntTask", 256, &tsqueue, 2, NULL);
+
+    /* initialize tasks */
+    xTaskCreate(&httpd_task, "HTTP Daemon", 2048, NULL, 2, NULL);
+    
+    xTaskCreate(&sntp_tsk, "SNTP", 512, NULL, 1, NULL);
+    register_app();
+}
  
 void user_init(void)
 {