Fixed stuff, added esphome config

peripherals/cc48x6/esphome.yaml

@@ -0,0 +1,70 @@
+# Board: NodeMCU v2 (ESP8266) (NodeMCU)
+# Definition: definitions/boards/nodemcuv2/manifest.yaml
+
+esphome:
+  name: trabantlux-1
+  friendly_name: TrabantLux-1
+  on_boot:
+    priority: 30
+    then:
+      - light.turn_on:
+          id: light_white
+          brightness: 33%
+
+  
+esp8266:
+  board: nodemcuv2
+
+logger:
+
+api:
+  encryption:
+    key: "JMbOQuANui4S5yDzat0wWVXrhmUO6cpBW2pjBsjRBO4="
+
+ota:
+  - platform: esphome
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  ap:
+    ssid: TrabantLux-1 Fallback Hotspot
+    password: "oftmAcVPECTy"
+
+uart:
+  tx_pin: GPIO2
+  baud_rate: 115200
+  id: lamp_uart
+
+
+light:
+  - platform: monochromatic
+    name: "Lampe"
+    id: light_white
+    output: lamp_output
+    gamma_correct: 1.0
+
+#  - platform: esp32_rmt_led_strip
+  - platform: neopixelbus
+    type: GRBW
+    variant: WS2812
+    pin: GPIO4
+    num_leds: 240
+    name: "NeoPixel Light"
+
+output:
+  - platform: template
+    id: lamp_output
+    type: float
+    write_action:
+      - lambda: |-
+          static int last_value = 0xffff;
+          uint16_t value = (uint16_t)(state * 255.0f);
+          if (value == last_value) return;
+          last_value = value;
+          
+          uint8_t hi = (value >> 8) & 0xFF;
+          uint8_t lo = value & 0xFF;
+
+          uint8_t data[] = {0x80, lo, 0x00};
+          id(lamp_uart).write_array(data, sizeof(data));